Bovard Studios Inc. Section April 6, 2004 Page 1
|
|
- Tabitha Hart
- 5 years ago
- Views:
Transcription
1 April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site finished. This section includes performance and descriptive type specifications. Edit to avoid conflicting requirements. Part 1 General 1.1 SECTION INCLUDES.1 Solid wood doors [and transom panels of [solid] [and] glazed design]..2 [Solid face] [Solid face and glazed] configuration..3 High quality hardware to suit door weight and service. 1.2 RELATED SECTIONS Select one or more of the following three paragraphs for frame type(s) required..1 Section [ - ]: Wood door frames. [OR].2 Section Custom Steel Frames..3 Section [ Stained Glass Windows:] [ Glazing:] Stained glass for wood doors. If factory finishing of wood doors is included in this section, delete the following paragraph..4 [Section Paint and Coatings: Site finishing of wood doors.] 1.3 REFERENCES List reference standards that are included within the text of this section..1 AWI (Architectural Woodwork Institute): Quality Standards. 1.4 QUALITY REQUIREMENTS.1 Door Construction: To AWI quality requirements specified in this section..2 Door Mass (Weight) - Approximate: <[ ] lbs> <<[ ] kg>>..3 Door Movement:.1 Smooth to the touch..2 With no self-movement due to gravity at any open position (with mechanical closer detached).
2 April 6, 2004 Page SUBMITTALS FOR REVIEW The following submittals are intended for Consultant and Owner review of door and stained glass design..1 Section 01300: Submission procedures..2 Product Data: Indicate door core materials and construction, wood [and veneer] species, and weight characteristics..3 Shop Drawings: Illustrate door opening criteria, elevations, sizes, types, swings, [special beveling,] [special blocking for hardware,] [factory machining criteria,] [factory finishing criteria,] identify cutouts for [glazing,] [hardware,] [and] [ ]. Include the following paragraph for submission of samples for selection of factory finish or site applied stain, colour, sheen, etc..4 Samples: Submit [two] [ ] samples of door surface, <[ x ] mm> <<[ x ] inch >>in size illustrating wood grain, stain colour, and sheen. 1.6 SUBMITTALS FOR INFORMATION The following submittals are informational; responsive action by the Consultant is not required..1 Section 01300: Submission procedures..2 Manufacturer's Installation Instructions: Indicate special installation instructions. 1.7 QUALITY ASSURANCE Select the quality level required for the project. Utilize this article when one quality level applies to all doors. If the project requires two or more quality levels, delete this article and edit the quality level required in each article or paragraph in this section. Include the last sentence of the following paragraph only when the costs of acquiring the specified standards are justified..1 Perform work in accordance AWI Quality Standard, Premium grade. Include the following paragraph if factory finishing is specified..2 Finish doors to a quality consistent with the AWI Premium grade specified..3 Manufacturer: Company specializing in manufacturing the Products specified in this section with minimum [Five (5)] [ ] years documented experience. 1.8 DELIVERY, STORAGE, AND PROTECTION.1 Section 01600: Transport, handle, store, and protect products..2 Accept doors on site in manufacturer's packaging. Inspect for damage. 1.9 PROJECT CONDITIONS.1 Section 01300: Coordination and meetings.
3 April 6, 2004 Page 3.2 Coordinate the work with door opening construction, and surrounding Work WARRANTY Improper specifying of warranty and correction period extensions may limit the statutory rights of the owner and the ability to enforce claims under a contractor's contractual warranty. Consult legal counsel before editing this article. Extended door warranties (beyond one year) are manufacturer's warranties and should be provided to the owner, in the owner's name. Investigate before specifying any term period beyond one year. Warranty may include statements such as delamination of veneer facing, warping, or defective materials..1 Section 01700: Warranties and bonds..2 Provide warranty to the following term:.1 Exterior Doors: [Five (5)] [ ] years..2 Interior Doors: [Two (2)] [ ] years..3 Include coverage for [delamination of veneer,] [warping beyond specified installation tolerances,] [defective materials,] [telegraphing core construction,] [ ]. Part 2 Products 2.1 MANUFACTURERS In this article, list the manufacturers acceptable for this project. Edit the subsequent descriptive specifications to identify project requirements and to eliminate any conflict with specified manufacturer's products..1 Bovard Studios, [Style] [Model] [ ]..2 Substitutions: [Refer to Section ] [Not permitted.] 2.2 DOOR [AND TRANSOM PANEL] TYPES.1 Door Face Design:.1 Interior, [flush] [stile and rail] [ ]..2 Exterior, [flush] [stile and rail] [ ]..2 Wood Face Species (Interior):.1 Clear [Alder] [Teak] [Beech] [White Birch] [ ]..2 Kiln dried to less than [10] [ ] %..3 Wood Face Species (Exterior):.1 [Cherry] [Mahogany] [Walnut] [Pine] [Fir] [Ash] [Birch] [Hemlock] [Maple] [ ]..2 Kiln dried to less than [10] [ ] %..4 Door [and Transom] Core:
4 April 6, 2004 Page 4.1 Exterior: <[57] [ ] mm> <<[2-1/4] [ ] inches>> thick; solid core construction of [ ] wood species..2 Interior: <[44] [57] [ ] mm> <<[1-3/4] [2-1/4] [ ] inches>> thick; solid core construction of [ ] wood species..5 Transom Panel Finish:.1 [To match door.] [Face veneer to [end] [ ] match door finish below.].2 [Stained glass with special design.] [.] 2.3 ADHESIVE Type I adhesive is more moisture resistant than Type II. For exterior doors select Type I adhesive..1 Facing Adhesive: Type [I - waterproof] [II - water resistant]. 2.4 ACCESSORIES Select and edit the following paragraphs, dependant on glass and glazing design intended..1 Glazing:.1 Outer Protective Glass: [Tempered.] [Safety.] [Laminated.] [.].2 Decorative Glass: Stained glass, set in [lead] [ ] came, special design and colors..3 Inner Pane: Clear glass, single pane of [tempered.] [safety.] [laminated.] [.].2 [Glass] [Panel] Shape and Profile:.1 Panels: [ ]..2 Carved: [ ]..3 Arch: [ ]. When specifying wood stops for fire rated doors, metal clips are required..3 Glazing Technique: Refer to Section Special hardware may be required for doors. Check with hardware supplier for weight of door and force ratings on hardware. Select either the first paragraph below or edit the subsequent paragraphs..4 Hardware:.1 [Refer to Section Door Hardware.].2 Hinges: [1-1/2 pair] [2-pair], [steel] [brass] [ ] material, ball bearing knuckles, [ ] style..3 [Handset:] [Latch:] [ ]..4 Closer [and Coordinator]: [ ]..5 Door Stop: [ ]..6 Hardware Finish: [ ]..7 Astragal: [Wood,] [Metal,] [T] [L] shape.
5 April 6, 2004 Page 5.8 Weatherstripping: [ ] type. 2.5 FABRICATION.1 Fabricate doors [and transom] in accordance to AWI Premium grade..2 Prepare doors for [glazing] [and] [hardware]..3 Provide solid lock blocks at [lock edge] [and] [top of door for closer] for hardware reinforcement..4 Vertical Exposed Edge of Stiles:.1 [Of same species as veneer facing.].2 [Hardwood] [Softwood] for [paint] [transparent] finish..3 Fit door edge trim to edge of stiles after applying veneer facing..4 Bond edge banding to cores..5 At exterior doors, provide [aluminum] [copper] [ ] fla shing at the [top and bottom rail] [and] [the sill of glazed openings for full thickness and width of door]. Utilize the following paragraph when factory machining for hardware is required. Special blocking may be required for through bolting of hardware; specify accordingly..6 Factory machine doors for finish hardware.1 Prepare in accordance with hardware requirements and dimensions..2 Do not machine for surface hardware..3 Provide solid blocking for through bolted hardware. Utilize the following paragraph when factory fitting is required..7 Factory fit doors for frame opening dimensions identified on shop drawings..8 Cut and configure exterior door edge to receive recessed weather stripping devices as per manufacturers instructions. 2.6 FINISH This article describes factory finishing of wood doors. The three finish types indicated are commonly available for wood doors. If more than one colour or sheen is required for several doors, it may be appropriate to incorporate a schedule at end of this section..1 Finish: [Transparent,] [Opaque,] [conversion varnish,] [vinyl catalysed,] [catalysed polyurethane,] AWI Premium quality, [ ] sheen. Include the following paragraph when the door top edge is visible from above, such as a mezzanine..2 Seal door top edge with [color] [ ] sealer to match door facing.
6 April 6, 2004 Page 6 Part 3 Execution 3.1 EXAMINATION.1 Section 01700: Verification of existing conditions before starting work..2 Verify that opening sizes and tolerances are acceptable..3 Do not install doors in frame openings that are not plumb or are out-of-tolerance for size or alignment. 3.2 INSTALLATION.1 Trim door width by cutting equally on both jamb edges..2 Trim door height by cutting bottom edges to a maximum of <[ ] mm> <<[ ] inch>>..3 Machine cut for hardware..4 Coordinate installation of doors with installation of frames specified in Section [08114] [ ], [and hardware specified in Section ].5 Coordinate installation of glass and glazing. 3.3 INSTALLATION TOLERANCES.1 Maximum Diagonal Distortion (Warp): <[3] [ ] mm> <<[1/8] [ ] inch>> measured with straight edge or taut string, corner to corner, over the diagonal surface of the door area..2 Maximum Vertical Distortion (Bow): <[3] [ ] mm> <<[1/8] [ ] inch>> measured with straight edge or taut string, top to bottom, over height of door at any vertical position..3 Maximum Width Distortion (Cup): <[3] [ ] mm> <<[1/8] [ ] inch>> measured with straight edge or taut string, edge to edge, over width of door at any horizontal position. 3.4 ADJUSTING.1 Section 01700: Adjusting installed work..2 Adjust door for smooth and balanced door movement..3 Adjust closer for full closure. 3.5 SCHEDULE Provide schedule when door and frame schedules are not described on drawings. The schedule should identify various types or categories of doors and associated frames, hardware sets, etc..1 [ ].
7 April 6, 2004 Page 7 END OF SECTION
SECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior stile and rail wood doors and sidelites. 2. Interior stile and rail wood doors. 3. Interior fire-rated,
More informationProduct Guide Specification For Nonrated & 20-Minute Rated Doors
Woodtech Trading Company 455 Fourth Avenue E.N. P.O. Box 2609 Columbia Falls, MT 59912 800-775-1352 (phone) 800-775-1353 (fax) www.woodtechdoor.com Product Guide Specification For Nonrated & 20-Minute
More informationDETAILED STILE AND RAIL WOOD DOOR SPECIFICATION
DETAILED STILE AND RAIL WOOD DOOR SPECIFICATION UNIVERSITY CONTACT: Structural Services, Maintenance & Operations (302) 831-8456 PART 1 GENERAL DOORS 1.01 GENERAL PROVISIONS 1. The Drawings and General
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationAMBICO Limited Section and WOOD BULLET RESISTANT DOORS AND FRAMES Page 1
Page 1 This section includes AMBICO Bullet Resistant, Wood Doors and Bullet Resistant Steel Frames which meet the UL752 Standard for Bullet-Resisting Equipment. This section relies on both the Canadian
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationSECTION ARCHITECTURAL WOODWORK
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Custom Cabinet Units a. Plastic Laminate b. Sound Barrier for Casework 2. Cabinet Hardware B. Related Sections:
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationGuide Specification Section Interior Aluminum Doors and Frames
Guide Specification Section 08 11 16 Interior Aluminum Doors and Frames SECTION 08 11 16 The Sliding Door Company s door and frame system includes glazed swing doors, sidelights, transoms, and fixed panels
More informationSECTION WOOD AND PLASTIC DOORS. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 081416 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationProduct Guide Specification
VT Industries, Inc. April 2014 890 Central Court New Albany, Indiana 47150 Toll Free (800) 626-6271 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com Product Guide Specification
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationB. Section Rough Carpentry: Support framing, grounds, and concealed blocking.
SECTION 06 41 00 - ARCHITECTURAL WOOD CASEWORK PART 1: GENERAL 1.1 SECTION INCLUDES A. Specially fabricated cabinet units. B. Cabinet hardware. C. Factory finishing. 1.2 RELATED REQUIREMENTS A. Division
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationB. Shop Drawings: For residential casework. Include plans. elevations, details, and attachments to other work.
HVAC 1Sunporch 1Fire Alarm Renovation SECTION 123530 RESIDENTIAL CASEWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes laundry room cabinets. 1.2 ACTION SUBMITTALS A. Product Data: For each type of
More informationCLEAR GLASS WALL SYSTEMS
CLEAR GLASS WALL SYSTEMS SERIES SI3000C Clean, uninterrupted views. Series SI3000C Clear Glass Walls create a seamless wall with uninhibited views. Clear Glass Walls eliminate vertical stiles, allowing
More informationIntroducing FIRE RATED Raised Panel Doors and Frames Call for details
08 14 33/ENJ BuyLine 0179 R ENJO Architectural Millwork Custom Wood Doors and Windows for Commercial and Residential Applications When ENJO makes an entrance,...everybody notices. Introducing FIRE RATED
More informationWHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK
WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK Accessories. We believe that functionality is at the heart of any great kitchen. Above are a few of the accessories available with Merillat Essentials. The
More informationglenviewdoors.com Volume 1
glenviewdoors.com Volume 1 Classic Collection Classic Collection GD-495W Shown in Dark Magohany GD-495W SL Shown in Dark Magohany GD-495 GD-495W SL Arch Top 75" x 114-1/4" GD-495W Arch Top 46-1/8" x 99-3/4"
More informationSECTION CUSTOM CABINETS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Preparation for installing utilities. 1.02 RELATED REQUIREMENTS SECTION 06410 - A. Section
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationBOOK OF MOLDINGS ~ 8TH EDITION W W P E E C. C O AN AMHERST WOODWORKING W O & SUPPLY, INC. COMPANY
BOOK OF MOLDINGS ~ 8TH EDITION 800.532.9110 WWW.COPPERBEECH.COM W W P E E C. C O AN AMHERST WOODWORKING W O & SUPPLY, INC. COMPANY WE ARE PROUD TO PRESENT THE 8TH EDITION OF OUR MOLDING CATALOG OVER 850
More information***************************************************************************************************************
06400 ARCHITECTURAL WOODWORK SPECIFIER: CSI MasterFormat 2004 number 06 40 00 PART 1 GENERAL 1.1 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install
More informationB. American Society for Testing and Materials (ASTM):
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install millwork and cabinet work. Install
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
More informationA Difference With Distinction
A Difference With Distinction Created with the goal of exceeding the expectations of discerning homeowners, Napa Door is proud to bring you the finest doors available in the market today...doors that make
More informationGuide Specification Section Interior Suspended Sliding Glass Doors
Guide Specification Section 08 32 13 Interior Suspended Sliding Glass Doors SECTION 08 32 13 The Sliding Door Company s product combines operable sliding glass doors with stationary glazed panels to create
More informationSECTION MANUFACTURED CASEWORK
1 GENERAL 1.1 SECTION INCLUDES SECTION 12300 MANUFACTURED CASEWORK A. Work required to complete the manufactured casework indicated by the Contract Documents, and the items necessary for its proper installation.
More informationSECTION ARCHITECTURAL WOODWORK. B. Related Sections: 1. Section Paints and Coatings: Field applied painted finishes.
PART 1 - GENERAL 1.1 SUMMARY SECTION 06 40 00 A. Provide architectural woodwork as shown and specified. Work includes: 1. Providing plastic laminate finished casework. 2. Providing plastic laminate clad
More informationSECTION WOOD ACCORDION FOLDING DOORS
SECTION 08 3513 WOOD ACCORDION FOLDING DOORS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood accordion folding doors. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary
More informationSECTION Display Case Door Series 1301-CM
1 SECTION 12 3559 Display Case Door Series 1301-CM PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Display Case Glass Doors. 2. Sidelites. B. Related work in other sections: 1. 08 8000- Glazing
More informationA. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and type.
SECTION 062000 - FINISH CARPENTRY PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and
More informationNATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE
NATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE Framed Door Styles Traditional Overlay Raised Panel Wood veneered raised panel doors feature concealed nickel-finished self-closing hinges. Drawer fronts
More informationCLEAR GLASS WALL SYSTEMS
PRODUCT DATA SHEET SERIES SI3000C CLEAR GLASS WALL SYSTEMS Clean, Uninterrupted Views Series SI3000C Clear Glass Walls eliminate vertical stiles, allowing for maximum transparency, natural daylighting,
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2002 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Figures Words STUDENT NUMBER Letter VCE VET FURNISHING (CABINET MAKING) Written examination Friday 1 November 2002 Reading
More informationSECTION WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationPROJECT LOCATION SECTION PREFINISHED STEEL DOOR FRAMES
SECTION 08 1213.17 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Prefinished steel door frames. B. [Sidelites] [, borrowed lites] [, and transom] assemblies. 1.02 RELATED REQUIREMENTS A. Section 06 2000 Finish
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationexceeding your door needs...
Five Lakes Manufacturing exceeding your door needs... Architectural, Commercial and Institutional Wood Doors. Our of Doors All of us at Five Lakes Manufacturing welcome you to our family of door products.
More informationSECTION HOLLOW METAL DOORS AND FRAMES
SECTION 081113 HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: Include construction details, material
More informationPre-Hung Entry Door Systems
Pre-Hung Entry Door Systems AC101_Achiever_Residential_10.13_Layout 1 10/23/13 4:10 PM Page 2 For over Fifty Years DUNBARTON Door and Entry Systems has been an innovative influence in the industry by pushing
More informationAsh Brook Golf Course Scotch Plains, New Jersey
SECTION 062013 - EXTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION FINISH CARPENTRY
SECTION 06200 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to
More informationLIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
More informationLead Lined, Non-Rated Particleboard (LL PC7-NR) Bonded Particleboard Core, 7-Ply Construction
Lead Lined, Non-Rated Particleboard (LL PC7-NR) Bonded Particleboard Core, 7-Ply Construction Single Swing Pair or Double Egress Core Type & Standards Particleboard: ANSI A208.1.2009 grade LD-1 (32 lb/ft
More informationMusic Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
More informationA. Boards or Strips: Lumber of less than 2 inches nominal size in least dimension.
HIGGINSVILLE HABILITATION CENTER MISC. BUILDING RENOVATIONS STATE OF MISSOURI HIGGINSVILLE, MISSOURI SECTION 061000 - ROUGH CARPENTRY PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationSECTION ARCHITECTURAL WOOD CASEWORK
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Factory finishing. E. Preparation for installing utilities. 1.02 SUBMITTALS SECTION 06
More informationTHE ANATOMY OF A DOOR TABLE OF CONTENTS. page 1. Door Construction Shapes and Sizes Wood Species Panel Options...
page 1 THE ANATOMY OF A DOOR TOP RAIL STILE LITE STILE MUNTIN BARS CAPTIVA WOOD DOORS Allow yourself to be captivated. Discover doors that are different from the inside out. Beautiful wood doors that are
More informationSECTION WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationMANUFACTURING INC. Specifications
Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection
More informationGeneral Product & Quality Specification
DATE: 29/05/12 VERSION NUMBER: 03 General Product & Quality Specification Exterior FX Range Paint Grade Flush Door Introduction: FX range paint grade flush doors are designed for external use, however
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More information2.01 Standard Entrances Description
2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed
More informationD I F F E R E N T B Y D E S I G N
DIFFERENT BY DESIGN INTRODUCTION Welcome to Dorwest. If you re looking for an innovative, quality door that has countless design possibilities, we have the door for you. DIFFERENT BY DESIGN Why Dorwest?
More informationSECTION LABORATORY CASEWORK AND EQUIPMENT
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 12 35 53 LABORATORY CASEWORK AND EQUIPMENT A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationSECTION INTERIOR FINISH CARPENTRY
SECTION 06 20 23 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the following items for field-applied paint finish: 1. Interior standing and running trim. 2. Interior plywood paneling. B. Related Sections
More informationT he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The
Double-Hung Replacement System Installation The Pozzi Collection PID001 (12/03) T he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The frame of the
More informationThermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
More informationEncore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
More informationProduct Guide Specification
Shield Casework February 2014 3421 Merriam Lane Overland Park, Kansas 66203 Phone 913-744-2183 Fax 913-384-3477 Website www.shieldcasework.com E-mail info@shieldcasework.com Product Guide Specification
More informationNARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions
NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Rough
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More informationSECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
More informationSECTION INTERIOR FINISH CARPENTRY. A. Lumber grading agencies, and the abbreviations used to reference them, include the following:
SECTION 06 2023 PART 1 GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior standing and running trim. 2. Interior stairs. 1.2 DEFINITIONS A. Lumber grading agencies, and the abbreviations
More informationFeaturing classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad. Carmel Double Hung
Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad window is a true aesthetic beauty. No visible PVC jambliners to mar the beauty of the
More informationHH Windows & Doors German engineered. American made. the horizontal pivot window
HH Windows & Doors German engineered. American made. the horizontal pivot window 1 Table of contents Key features Sizing Configurations Section drawings Muntins and stops Plane of installation Interior
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationImola. elmwood fine custom cabinetry. scroll for more information. General Specifications. Prime Center Panel. Additional Panel Options
4.7 5. 5.7 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 3/8 thick veneer flat center panel, virtually flush with back of rails. See drawings for
More informationToll-Free
Primary applications for Ross DS Series Security Doors and Frames include government, industrial, commercial and residential properties where protection of people and property is of utmost concern and
More informationNature Series Wood Doors SIMPSON DOORS IN STOCK
Nature Series Wood Doors SIMPSON DOORS IN STOCK CRAFTSMAN COLLECTION SIMPSON & BAYER BUILT Simpson Craftsman Collection doors are stocked 1-3/4, 3 0 x 6 8, 3/4 flat panel and ovolo sticking with. Doors
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationSECTION CARPENTRY
SECTION 06100 CARPENTRY PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Carpentry work including grounds, nailers, blocking, miscellaneous framing, plywood backing panels, plywood sheathing, preservative
More informationDOOR Selection Guide - 1A
(216) 292-6555 / ; E-mail: info@bbwood.com DOOR Selection Guide - 1A See the following Sections for all of our door products 2. Decorative Entrance 3. Louver, Panel & Glass, 4. Flush, Masonite, MDF 5.
More informationSuperior by Design. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Superior by Design. Euro PIVOT Door Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING STACKING PIVOT
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationMarvin Patio Doors VALUE THROUGH AND THROUGH
Marvin Patio Doors VALUE THROUGH AND THROUGH 2 Learn more at Marvin.com at our very core, we are craftspeople who take pride in building the right way. that is why, just like every window, we build each
More informationADDENDUM TO THE CONTRACT. for the GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION. Contract No. E16-181
ADDENDUM TO THE CONTRACT for the ENGINEERING DEPARTMENT GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION Contract No. E6-8 ADDENDUM NO.: ONE CURRENT DEADLINE FOR BIDS: May 9, 206 PREVIOUS ADDENDA:
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Laminate clad cabinets and custom components. B. Laminate clad countertops. C. Cabinet hardware including countertop
More informationInfinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
More informationWELLNESS CENTER REMODEL UNIVERSITY OF CALIFORNIA, MERCED MERCED, CALIFORNIA PROJECT NO.: 907432 C. Solid Surfacing Material: 1. Manufacturers: D. Wood: a. First Floor; Wilsonart International, Solid Surfaces,
More informationInstallation Guide. for E-Series/Eagle Clad Hinged Inswing French Door
Installation Guide for E-Series/Eagle Clad Hinged Inswing French Door Thank you for choosing Andersen. Instructions are for typical, new wood-framed wall construction with weather protection in place.
More informationSECTION INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 062023 - INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Product Data: For each type of product indicated cabinet hardware and accessories, and finishing materials and processes.
SECTION 06402 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationSERIES 5001 SLIDING GLASS DOOR PATIO DOORS INSTALLATION GUIDE
PATIO DOORS INSTALLATION GUIDE These instructions cover general installation conditions. Improper installation could affect your doors operation and warranty. Deviations from these instructions should
More informationInspiration: Inside and Out
Inspiration: Inside and Out Interior and Exterior Stile and Rail Wood Doors Opening New Possibilities Introducing Exterior Stile and Rail Doors The beauty and durability of an architectural wood door shouldn
More informationStudent Services & Classroom Addition
SECTION 105116 - WOOD LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationFUZION Fused Glass Countertops - Andrew Pearson Design
FUZION Fused Glass Countertops - Andrew Pearson Design FUZION Fused Glass Countertop components are available in a wide variety of glass types, manufactured to your project specifications. Glass countertops
More informationAndersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section. Clad French Casement Windows...
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section Clad French Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Operating Windows... 3 Parts
More informationM O D E R N J A M B S Y S T E M S
Casing-Less Jambs Cross-Section of Casing-Less Jamb Installation with Concealed Hinge Phillips U-200 trim or similar Requires jamb installation prior to Jamb width should be same as stud width Swing range
More informationINTEX Millwork Solutions SECTION EXTERIOR PVC PERGOLAS (IBC Compliant)
SECTION 066030 EXTERIOR PVC PERGOLAS (IBC Compliant) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and other Contract Documents, listed in the agreement between the Owner and Contractor, apply to
More informationBAYS, BOWS, DETAILS AND VALUE ADDED FEATURES. gerkin.com
BAYS, BOWS, DETAILS AND VALUE ADDED FEATURES gerkin.com Gerkin COMFORT SERIES BOWS Whether, a room needs to feel a little more open, space is a premium or some character is needed, Gerkin fits the need
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 101400 - SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and supplementary Conditions and Division-1 Specification Sections,
More information