General Product & Quality Specification
|
|
- Camron McCarthy
- 5 years ago
- Views:
Transcription
1 DATE: 29/05/12 VERSION NUMBER: 03 General Product & Quality Specification Exterior FX Range Paint Grade Flush Door Introduction: FX range paint grade flush doors are designed for external use, however to maintain product integrity it is essential that doors are fully decorated on site using a recognised paint or high build stain system. Door faces are, exterior grade red hardwood plywood. Vertical edges are lipped in hardwood. The edge lipping is machined back close to the door face but may require sanding flush as part of the decoration process. The door must be fully sealed on all edges, especially on the top and bottom. Environmental Certification: Doors are manufactured under the formally audited Environmental Standard BS EN ISO All materials used are from known managed sources, including some formally certified components. Dimensional tolerances apply as follows: Tolerance Measurement Method Width +/- 1.5mm EN 951 Length +/- 1.5mm EN 951 Thickness +/1.0mm/ - 2.0mm EN 951 Squareness 1.5mm EN 951 Twist 8mm EN 952 Bow 8mm EN 952 Cup 4mm EN 952 Local Flatness 0.4mm EN 952
2 Quality: Manufacture is controlled against a formal quality management system, - ISO9001 At supply, door faces and edges will be visibly defect free, when viewed from 2 meters distance. Faces may include small areas of applied filler, which will be sanded flat. Edge lippings may require face sanding before decoration. The moisture content of timber components is critically controlled in line with the industry norm, based on BS EN 942. Details of applicable product warranties, including qualifying terms and conditions are available from the current Premdor Range Guide or website. Alternatively contact Premdor s Technical or Sales Team for specific guidance. Packaging and Product Identification: Doors are not wrapped A Product Code or ID is ink marked on the door end, together with lock side indicator if relevant. Fire doors carry a uniquely numbered identification label applied to the top door edge indicating compliance with type testing under BS 476 Part 22 and also BWF / CERTIFIRE accreditation. This label should not be removed, even after installation. Glazed doors: Factory glazed doors incorporate toughened safety glass to the requirements of BS EN Panes are discreetly marked accordingly, typically at a corner point of the glass. Glass is suitably bedded and beads are securely fixed. Apertures must not be added to fire doors retrospectively except under specific Premdor approval and BWF / CERTIFIRE compliance. Constructional specification: For a general drawing of the standard range of optional core constructions, and door weights, see Annex A, or contact Premdor for more information. Every effort has been made to ensure the accuracy of this information. In the interest of continuing design development however we reserve the right to modify specifications without prior notice and without incurring any obligation.
3 EXTERIOR FX RANGE PAINT GRADE FLUSH DOOR Perimeter Framing (Whitewood) (Double Railed) Lock Block-Full width (Particleboard) **38 x 38mm (44mm Imperial Doors) **38 x 38mm (44mm Metric Doors) 38 x 325mm (44mm Imperial Doors) 38 x 325mm (44mm Metric Doors) Lock block positioned FULL WIDTH, central within door height (325mm long). Typical door weight 11kgs (762 x 1981). Maximum edge trim 5mm Top/Bottom, 3mm Vertical
4 FX EXTRA CORE Perimeter Framing (Whitewood) (Triple Railed) Lock Block-Full width (Timber) Typical door weight 31kgs (762 x 1981). Maximum edge trim 40mm Top/Bottom, 3mm Vertical **38 x 38mm (44mm Imperial Doors) **38 x 38mm (44mm Metric Doors) 38 x 325mm (44mm Imperial Doors) 38 x 325mm (44mm Metric Doors)
5 FX FIRESHIELD FD30 Perimeter Framing (Whitewood) **38 x 38mm (44mm Imperial Doors) (Single Railed) **38 x 38mm (44mm Metric Doors) Typical door weight 27kgs (762 x 1981). Maximum edge trim 5mm Bottom, 3mm Vertical
6 FX FIREMASTER FD60 Perimeter Framing (Hardwood) **48 x 75mm (54mm Imperial Doors) (Double Railed) **48 x 75mm (54mm Metric Doors) Typical door weight 57kgs (762 x 1981). Maximum edge trim 5mm Bottom, 3mm Vertical
General Product & Quality Specification
Date: 22/07/2016 Revision: 07 General Product & Quality Specification Flush Innova Veneer Doors Introduction: Innova veneered flush doors are designed for internal use only, and must not be exposed to
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationCARE OF TIMBER DOORS ON SITE
CARE OF TIMBER DOORS ON SITE Contents 1. Introduction 2. Delivery and Storage 3. Installation 4. Finishing INTRODUCTION Doors and doorsets manufactured by members of the British Woodworking Federation
More informationCERTIFICATE OF APPROVAL No CF 581 CGI INTERNATIONAL LIMITED
CERTIFICATE OF APPROVAL No CF 581 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of International House, Millfield
More informationGeneral guidance. L20Doors/ Shutters/ Hatches. 1 Fire doors
Doors/ Shutters/ Hatches General guidance 1 Fire doors 1 Fire Doors For guidance on specifying fire resisting doors, see: BS 8214. TRADA Wood Information, Section 1, sheet 13. Both the Building Regulations
More informationDOUBLE GLAZED PRODUCT 2 pane servery 16mm double hung in alum frames
VS P16 v - medium box Jun 013 DOULE GLZED PRODUCT pane servery 16mm double hung in alum frames (bottom pane - medium box, double glazed - Interlocking model) vertical section - 80 31,5 head (by others)
More informationCERTIFICATE OF APPROVAL No CF 767 RUTLAND UK
CERTIFICATE OF APPROVAL No CF 767 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Whittington Way, Chesterfield,
More informationCERTIFICATE OF APPROVAL No CF 370 SAMUEL HEATH & SONS PLC
CERTIFICATE OF APPROVAL No CF 370 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Leopold Street, Birmingham,
More informationSPECIAL DOORS & FIRE DOORS
COMPLETE HIGH QUALITY SOLUTIONS SPECIAL DOORS & FIRE DOORS May 2016 Q U A L I T Y PERFORMANCE AT AN AFFORDABLE PRICE Syro Industry takes the problems out of door specification. Simply let us know your
More informationCERTIFICATE OF APPROVAL No CF 284 INTUMESCENT SEALS
CERTIFICATE OF APPROVAL No CF 284 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of The Old Brewery, Pampisford,
More informationCERTIFICATE OF APPROVAL No CF 718 PILKINGTON GROUP LIMITED
CERTIFICATE OF APPROVAL No CF 718 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Prescot Road, St. Helens
More informationCERTIFICATE OF APPROVAL No CF SEALMASTER (A division of Dixon International Group Ltd)
CERTIFICATE OF APPROVAL No CF 5387 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of (A division of Dixon
More informationSECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationCERTIFICATE OF APPROVAL No CF 5428 SEALMASTER
CERTIFICATE OF APPROVAL No CF 5428 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of (A division of Dixon
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior stile and rail wood doors and sidelites. 2. Interior stile and rail wood doors. 3. Interior fire-rated,
More informationFIXED FLAT ROOFLIGHT: INSTALLATION INSTRUCTIONS (Double & triple glazed)
FIXED FLAT ROOFLIGHT: INSTALLATION INSTRUCTIONS (Double & triple glazed) Thank you for choosing to purchase a ROOF Maker Fixed Flat Rooflight. Assembly Procedure Guidance Please take precaution when moving
More informationCode Description Qty. Material Dimensions A Long Inner 4 2 x 4 pine 34-1/2 long
B utler s Chest Because it s designed to suit a variety of purposes, this butler s chest is a piece of furniture that absolutely anyone can appreciate. Used by itself, it can serve as an end table or can
More informationProduct Guide Specification For Nonrated & 20-Minute Rated Doors
Woodtech Trading Company 455 Fourth Avenue E.N. P.O. Box 2609 Columbia Falls, MT 59912 800-775-1352 (phone) 800-775-1353 (fax) www.woodtechdoor.com Product Guide Specification For Nonrated & 20-Minute
More informationThe perfect solution for imperfect walls
SpeedSet Plus The perfect solution for imperfect walls unique features Doorset adjustability allows for uneven walls and ensures easy installation CHOICE OF FINISHES White re-coatable foil requiring minimal
More informationTHE B6 HEEL BEAD SEAL SECURITY GLAZING SYSTEM
THE B6 GLAZING SYSTEM GLAZING SYSTEMS FOR JUNE 2009 THE B6 HEEL BEAD SEAL SECURITY GLAZING SYSTEM Page 1 DESCRIPTION The B6 Heel Bead Seal Security Glazing System is suitable for installing all types of
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFIRESTRIP 30 Version No.3 Revision Date: 19/07/2013 Page 1 of 5
Version No.3 Revision Date: 19/07/2013 Page 1 of 5 DESCRIPTION An Intumescent Strip Sealant 12mm x 3mm which can provide 30 minutes resistance to the passage of fire and smoke when used to glaze a wide
More informationFLAMEBREAK. Lippings & Facings 1. General: Rev.D
FLAMEBREAK Lippings & Facings 1 General: TM FLAMEBREAK Door Blanks are supplied with mixed tropical hardwood stiles and rails as part of the core structure. The stiles and bottom rail can be removed for
More informationEI60 FD60 EI60 SMOKE SEAL. F6002 R UK - Feb (pair) Rebated meeting edge
F6002 R UK - Feb 2011 (pair) Rebated meeting edge Product denomination : FD602 Door leaf : Huet solid timber core. Thickness: 51 mm with hardwood stiles all round. Equal or unequal leaves with rebated
More informationA F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD Introduction to Strebord $ Strebord 35+, 38+, 44, 54 & Superpan Materials are purpose made, multi-layer particle boards designed specifically for use in the manufacture of high
More informationCHOOSING EXTERIOR DOOR FRAMES
DOOR FRAMES GUIDE CHOOSING EXTERIOR All exterior door frames are designed for long-lasting performance and easy installation. Assembled oak veneer door frames are available to complement oak Stormsure
More informationPlease check for hologram on our products
1995 Please check for hologram on our products Benin Teak Main Doors (African & Pooja Teak) Doors (African Teak) Niki presents Solid Natural Benin Teak Doors with different designs. These doors are suitable
More informationColonial Knotty Pine Shaker French Louver Bifold. October 1, 2016
Colonial Knotty Pine Shaker French Louver Bifold October 1, 2016 Colonial Stile & Rail Doors SEE LIST PRICES ON PAGE 19 1 7 6 7 2 1. Top Rail 2. Cross Rail 3. Lock Rail 4. Bottom Rail 5. Stile 7 6 7 6.
More informationNATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE
NATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE Framed Door Styles Traditional Overlay Raised Panel Wood veneered raised panel doors feature concealed nickel-finished self-closing hinges. Drawer fronts
More informationTechnical Information
Technical Information The following sections cover the methods and manufacturing capabilities for producing processed glass and Insulated glass units. Sections 1. Cutting 2. Edge working 3. Toughening
More informationQuality Door Distribution PRODUCT RANGE GUIDE 2016
PRODUCT RANGE GUIDE 2016 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 24 Page 25 Page 26 Page 27 Page
More informationCERTIFICATE OF APPROVAL No CF 577 HOPPE (UK) LIMITED
CERTIFICATE OF APPROVAL No CF 577 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Gailey Park, Gravelly
More informationCERTIFICATE OF APPROVAL No CF 731 ALLGOOD PLC
CERTIFICATE OF APPROVAL No CF 731 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 63-83 Brearley Street,
More informationINTERNAL DOORSETS.
INTERNAL DOORSETS www.jeld-wen.co.uk TAKING OUR RESPONSIBILITIES SERIOUSLY JELD-WEN aspires to be the industry leader in environmentally responsible practices and products. We have committed ourselves
More informationFire Door Maintenance Scheme Accepted Repair Techniques
01 Damage to lipping. If the lipping has splits and gouges where the timber has been broken away, the damaged area should be cleanly cut away by removing the relevant section of timber. A section of hardwood
More informationAll Window Installation Instruction
1 All Window Installation Instruction Hurd Window Installation Instructions for Nail Fin & Wood Brick Mould Units Nail Fin Windows See Pages 2-11 Wood Brick Mould Windows See Pages 2-6, 8 & 12BM - 14BM
More informationJFI2089WTS Panel Dimension Guide 3/4 Overlay Panel Dimensions
These dimensions are for the overlay panels. Dimensions are in inches. DESCR HEIGHT WIDTH THICKNESS 3/4 Overlay Panel Dimensions Upper Overlay Panels 1/4" 36 " 1/4" 17 7/8" 17 7/8 3/4" 16 17 7/8 3/4 15
More informationINTERIOR. Checkrail. Flashing tape
Pella Corporation 2007 Part Number: 808F0100 INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR PELLA PRECISION FIT DOUBLE-HUNG VENT WINDOW PARA LA VENTANA DE GUILLOTINA CON HOJA PRACTICABLE PRECISION
More informationA. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and type.
SECTION 062000 - FINISH CARPENTRY PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and
More informationWHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK
WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK Accessories. We believe that functionality is at the heart of any great kitchen. Above are a few of the accessories available with Merillat Essentials. The
More informationEncore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
More informationQuality Door Distribution PRODUCT RANGE GUIDE 2015
PRODUCT RANGE GUIDE 2015 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 24 Page 25 Page 26 Page
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationInfinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
More information2 pane servery 10mm sashless double hung in aluminium frames (bottom pane fixed - small box) with aluminium covers vertical section A-A
VS P10 v - small box in aluminium frames (bottom pane - small box) vertical section - 60 6 head (by others) VS 10mm head standard handle (clear acrylic) pulley and cord arrangement glass height = (opening
More informationDear Contractor, I am glad that you are interested in our window rebate program.
Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.
More information7500/7550 Series Casement Windows (2002 to 2010)
7500/7550 Series Casement Windows (2002 to 2010) What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
More informationKestrel Aluminium Systems Limited. Product Manual Section 11 Thermal Framing System - Fabrication. Manual Version
Limited Product Manual Section 11 - Fabrication Manual Version 23.0.1 Section 11.01 Fabrication 11.01.01 sheet 1 General guidelines for cutting and bar preparation Section 11 Contents Section 11.02 Fabrication
More informationInstallation of Fiberglass Windows
Installation of Fiberglass Windows Before you begin please read and understand these installation instructions. The following installation instructions are recommended by Norwood and failure to follow
More informationintegra living doorsets
integra living doorsets integra living doorsets page 2 integra living doorsets Aspex UK are one of the UK s leading architectural ironmongery suppliers and have recently added doorsets to the extensive
More informationDETAILED STILE AND RAIL WOOD DOOR SPECIFICATION
DETAILED STILE AND RAIL WOOD DOOR SPECIFICATION UNIVERSITY CONTACT: Structural Services, Maintenance & Operations (302) 831-8456 PART 1 GENERAL DOORS 1.01 GENERAL PROVISIONS 1. The Drawings and General
More informationEXTERIOR MOULDING. Crowns & Trim
EXTERIOR MOULDING Crowns & Trim Treated Exterior Grade Moulding About Advantage Plus LOSP Mouldings EXTERIOR MOULDING AND TRIM 134 Advantage Plus Exterior grade mouldings have the same features and benefits
More informationInternal timber. Preservation. Timber preservation, fire retardants and coatings
Internal timber Preservation Timber preservation, fire retardants and coatings Treated Timber Specification Sentrin Preserve LP, (low pressure), treated timber has built in long term protection against
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationW.Howard Catalogue. Issue No.5
W.Howard Catalogue Issue No.5 W. Howard Limited The Leing Edge in MDF Moulding With over 50 years experience in the timber industry, we pride ourselves in being a progressive and innovative company. Originally
More informationBlankfort TM 60+ MDF. Description. Construction
Blankfort 60+ MDF BM Trada Certification Q-Mark Fire Door Scheme Certified Product Certificate 006/010 applies Description Blankfort 60+ MDF is a high density MDF or hardboard faced with high density particleboard
More informationSeries 7650 Installation Instructions Sliding Glass Door
Series 7650 Installation Instructions Sliding Glass Door Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration products are removed
More informationStudent Services & Classroom Addition
SECTION 105116 - WOOD LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationM O D E R N J A M B S Y S T E M S
Casing-Less Jambs Cross-Section of Casing-Less Jamb Installation with Concealed Hinge Phillips U-200 trim or similar Requires jamb installation prior to Jamb width should be same as stud width Swing range
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2002 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Figures Words STUDENT NUMBER Letter VCE VET FURNISHING (CABINET MAKING) Written examination Friday 1 November 2002 Reading
More informationXL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
More information20 Minute Rated Barrier Resistant (BR SCL5-20PP) Bonded SCL Core, 5-Ply Construction, Cat. A, PP
20 Minute Rated Barrier Resistant (BR SCL5-20PP) Bonded SCL Core, 5-Ply Construction, Cat. A, PP (Fire Test Standards IBC, UL-10C, CAN/ULC S104, & NFPA 252) Single Swing ONLY Core Type & Standards Structural
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationMetal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions
PO Box 480 Ph: 417-235-7821 Monett, MO 65708 Fax: 417-737-7140 Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions These installation instructions are recommendations
More informationGEORGIA HARDWOODS SOLID WOOD DOOR STYLES
12/16/05 GEORGIA HARDWOODS SOLID WOOD DOOR STYLES SRP RRP FRP SDP RDP ADP CRP 2RRP 2FRP CDP 2RDP 2CDP 2CRP ARP 2ARP DAP SPP MSPP MULLION DOORS- SPECIFY HOW MANY LIGHTS BEADED STYLES SPECIFY SOLID PANEL
More informationAMBICO Limited Section and WOOD BULLET RESISTANT DOORS AND FRAMES Page 1
Page 1 This section includes AMBICO Bullet Resistant, Wood Doors and Bullet Resistant Steel Frames which meet the UL752 Standard for Bullet-Resisting Equipment. This section relies on both the Canadian
More informationexperts in veneer doors and panels since 1837
Unit 1400 1st Floor Montagu Court Kettering Parkway Kettering Venture Park Kettering Northamptonshire NN15 6XR T +44 (0) 1844 219600 E graefe@graefe.co.uk www.graefe.co.uk GRAEFE EXPERTS IN VENEER DOORS
More informationLead Lined, Non-Rated Particleboard (LL PC7-NR) Bonded Particleboard Core, 7-Ply Construction
Lead Lined, Non-Rated Particleboard (LL PC7-NR) Bonded Particleboard Core, 7-Ply Construction Single Swing Pair or Double Egress Core Type & Standards Particleboard: ANSI A208.1.2009 grade LD-1 (32 lb/ft
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationSECTION INTERIOR FINISH CARPENTRY
SECTION 06 20 23 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the following items for field-applied paint finish: 1. Interior standing and running trim. 2. Interior plywood paneling. B. Related Sections
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationNon-Rated Agrifiber (AF5-NR) Bonded Agrifiber Core, 5-Ply Construction
Non-Rated Agrifiber (AF5-NR) Bonded Agrifiber Core, 5-Ply Construction Single Swing Pair or Double Egress Core Type & Standards Agrifiber: ANSI A208.1.2009 grade LD-1 (26-28 lb/ft 3 ) Complies with CARB
More informationA comprehensive range of high performance fire doors & door sets. Caledonian Plywood Company
www.caledonianplywood.com CI/SfB (31.52) Xi (K22) A comprehensive range of high performance fire doors & door sets. Caledonian Plywood Company About Caledonian Plywood Caledonian Plywood is one of the
More informationT he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The
Double-Hung Replacement System Installation The Pozzi Collection PID001 (12/03) T he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The frame of the
More informationDAP Latex Window Glazing
DAP Latex Window Glazing PRODUCT DESCRIPTION DAP Latex Window Glazing is a ready-to-use glazing compound that may be used for face glazing single pane glass in wood or metal window frames. Its spout allows
More informationPFPF and FTSG Agreed Assessment Rules for: Timber Based Doorset. FTSG N288 (e)
PFPF and FTSG Agreed Assessment Rules for: Timber Based Doorset FTSG N288 (e) 03 December 2004 PFPF and FTSG Agreed Assessment Rules for: Timber Based Doorsets Introduction The aim of the document is to
More informationA F LCON PANEL PRODUCTS LTD
& Facings FA LCN PANEL PRDUCTS LTD Door Core General: Strebord doors for internal use should be Lippings, particularly lippings at the closing & lipped on two vertical edges in hardwood as a meeting stiles
More informationCHEVRON TOUGHENED GLASS SPECIFICATIONS
1. STANDARDS COMPLIANCE 2. STAMP (TOUGHENED GLASS IDENTIFICATION & STANDARDS LOGO) 3. SIZE LIMITATIONS 4. DIMENSIONAL TOLERANCES 5. FLATNESS TOLERANCE (BOW) 6. EDGE QUALITY 7. SURFACE QUALITY 8. ROLLER
More informationCERTIFICATE OF APPROVAL No CF 5610 CARLISLE BRASS LTD
CERTIFICATE OF APPROVAL No CF 5610 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Protection Products The undermentioned products of Parkhouse Road, Carlisle,
More informationAluminium Window Scheme to BS4873 & PAS24:2016
SCOPE OF CERTIFICATION Aluminium Window Scheme to BS4873 & PAS24:2016 Manufacturer of Enhanced Security Windows in accordance with the Exova BM TRADA Q-Mark Scheme requirements. (Check with Secured by
More informationSECTION WOOD AND PLASTIC DOORS. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 081416 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationAbout Conestoga Wood Specialties
About Conestoga Wood Specialties Since 1964 Conestoga Wood Specialties has manufactured the highest quality cabinet doors and wood components for the Kitchen & Bath industry. From our modest beginnings
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More information2 pane servery 6mm sashless double hung in aluminium frames (top pane fixed - small box) with aluminium covers vertical section A-A
VS 2P6 v - small box in aluminium frames (top pane - small box) vertical section - 68,4 12,6 head (by others) head adaptor pulley and cord arrangement glass height = (opening + 44mm) / 2 6mm lapseal 6mm
More information2 pane servery 6mm sashless double hung in aluminium frames (bottom pane fixed - small box) with aluminium covers vertical section A-A
VS P6 v - small box in aluminium frames (bottom pane - small box) vertical section - 68,4 1,6 head (by others) head adaptor standard handle (clear acrylic) aluminium lift handle (optional) for aluminium
More informationMethod of Build 1. Fire. Sound
Method of Build 1 General Viso Fire & Acoustic in the solid form differs from most other systems as it can be erected using 12.5mm & 15.0mm boards within the same Aluminium framework. Also hidden fix board
More informationSectional Doors and Insulated Roller Doors. 2010/11 Range Guide. a member of the Sanwa Shutter family
Sectional Doors and Insulated Roller Doors 2010/11 Range Guide a member of the Sanwa Shutter family Steel Sectional Garage Doors horizontal rib iso 20/45 The narrow horizontal rib is instantly recognisable
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationCity of Manteca Boarding Requirements
City of Manteca Boarding Requirements There should be no boarding above the first floor unless entry is possible without use of a ladder, and the opening is large enough for a person to easily pass through.
More information05/11. CI/SfB (22) fire & sound. tenon. A cost effective performer.
CI/SfB 05/11 (22) fire & sound tenon A cost effective performer fire & sound tenon fire & sound at a glance BOARD ROOMS EXECUTIVE OFFICE SUITES CONFERENCE SUITES GENERAL OFFICE CLEAN ROOMS LIGHT INDUSTRIAL
More informationPanel Assembly and Installation
Assembly and Installation Assembly and Installation for Andersen 400 Series Frenchwood, 200 Series Narroline, 200 Series Perma-Shield Gliding Patio Doors and 400 Series Perma-Shield Gliding Patio Doors
More informationSeries 9000 Vinyl Horizontal Slider
Series 9000 Horizontal Slider Series 9000 Vinyl Horizontal Slider Contents List of Architectural Drawings...9000HS - 3 Elevations - XO or OX...9000HS - 4 Available Sizes - XO or OX...9000HS - 5 Elevations
More informationJoinery and Flooring. Door Linings and Casings. Flooring. Lining Casing. Mouldings. Door Seals and Fire Strips
Joinery and Flooring Flooring Our flooring range offers a great selection of materials and finishes to suit your project solid wood, engineered wood, and laminates are available in a choice of designs.
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationTable of Contents. Items Only Available in Hampshire Custom Line
9225 State Route 66 Piqua, OH 45356 (937) 773-3493 Catalog updates available at /catalogs Table of Contents 3/4 Door Pilaster Added To The End Of Tall Cabinet I-3 Angled Tall End Panel I-4 Chamfered Stile
More information9.1. Door Assembly Coordination. Ÿ Architrave is not described in
9.1 Introduction: This document provides for general guidance with regard to the coordination of bespoke door assemblies. The document includes recommendations with regard to the reference points generally
More informationASS 70.HI Lift/Sliding and Sliding Doors Installation Guide
ASS 70.HI Lift/Sliding and Sliding Doors Installation Guide 2 Schueco ASS 70.HI Lift/Sliding and Sliding Doors Installation Guide Installation guide IMPORTANT The ASS 70.HI door should be fitted by competent
More informationSTAIRCASES STAIRCASES I DOORS I WINDOWS
STAIRCASES I DOORS I WINDOWS STAIRCASES Stair production at ARU Grupp and supported by ARU Joinery is based on 12 years of experience combined with world-class software solutions and CNC technology. _
More informationPvcu Bi Folding Doors Fitting Instructions.
Pvcu Bi Folding Doors Fitting Instructions. THE FOLLOWING INSTRUCTIONS ARE GIVEN IN GOOD FAITH AND ARE FOR GUIDANCE ONLY. NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY MIS- INTERPRETATION. WHEN INSTALLING
More information