Masterfi nish -25Q hard material matters
|
|
- Hilda Howard
- 6 years ago
- Views:
Transcription
1 hard material matters Masterfinish -25Q
2 for optimum surface finish on aluminium components Smooth and clean component surfaces are not only a desired visual result, but often also a technical necessity. The production of smooth surfaces with minimum surface roughness causes high costs. This is mainly due to feed rate reduction of the turning tool, which results in considerably longer machining times. With CERATIZIT Masterfinish -25Q you will achieve smooth surfaces even with high feed rates. AlCuMg1 v c = 400 m/min f = 0,2 / 0,3 / 0,4 Rε = 0,8 a p = 0,5 / 1,5 / 3,0 R a = average roughness values -25Q Standard insert Benefit Considerably improved surface finish attainable with the same machining conditions Up to 35% higher feed rates whilst maintaining surface quality Reduced machining time and cost reduction 2
3 Characteristics Wiper edge effect Optimised chip groove High-quality clean surfaces Microfinish surface Improved swarf control minimises long chips and guarantees machining safety Reduced tendency to stick with difficult materials Rake angle of 25 and sharp cutting edge Fine grain carbide grade H210T Low cutting forces Long tool life Version FL Even more competence in the field of copy turning Version FN Version...FL/R Considerably increased feed rates with longitudinal turning Optimum surface quality Increased depth of cut and improved surface quality with face turning a p =0,7 (with R 0,4) a p =1,4 (with R 0,8) Profile turning possible as with standard inserts Copy turning and production of standardised recesses, thread undercuts and workpiece profiles according to drawings No profile deformation Version...FN Increased feed rates with longitudinal turning Optimum surface quality Increased depth of cut and improved surface quality with face turning a p =0,5 (with R 0,4) a p =1,0 (with R 0,8) Profile turning possible as with standard inserts 3
4 Application and programme Application Materials: Aluminium cast and wrought alloys, also with low Si-content (G-AlSi2, AlMg Si) Fine finishing of stainless steels and super alloys Non ferrous metals, cast iron, stainless steel, super alloys CCGT... FN DCGT FL/R DCGT FN VCGT FL/R Dimensions in detail: Insert X Z R1 R2 CCGT FN CCGT 09T304 FN CCGT FN CCGT FN 0,56 0,67 0,89 1,27 0,40 0,80 0,20 0,40 Insert X Z R1 R2 DCGT 11T304 FN 0,20 0,59 0,20 0,25 DCGT 11T304 FL/R 0,44 0,81 0,40 0,40 DCGT 11T308 FN 0,38 1,12 0,35 0,40 DCGT 11T308 FL/R 0,85 1,62 0,80 0,80 VCGT FL/R 0,56 0,94 0,40 0,40 Delivery programme Form Type, desccription CCGT FN-25Q CCGT 09T304FN-25Q CCGT 09T308FN-25Q CCGT FN-25Q CCGT FN-25Q DCGT 11T304FL-25Q DCGT 11T304FN-25Q DCGT 11T304FR-25Q DCGT 11T308FL-25Q DCGT 11T308FN-25Q DCGT 11T308FR-25Q VCGT FL-25Q VCGT FR-25Q H210T Ex stock. Subject to normal availability. 4
5 Surface quality and application area CCGT CCGT 09T304 CCGT 09T308 CCGT Attention: The Ra/feed rate diagram includes guide values for medium chip thickness, which may vary according to material and depth of cut. 5
6 Surface quality and application area CCGT DCGT 11T304 DCGT 11T308 VCGT Attention: The Ra/feed rate diagram includes guide values for medium chip thickness, which may vary according to material and depth of cut. 6
7 Application examples Problem / criteria Surface quality Result Batch size: 60 parts R a 0,25 µm Workpiece: Sleeve Material: AC 112 (AlMgSi 1) Machine: Mori Seiki SL 253, 18 KW Tool: SDJCR 2525 M11 Insert: DCGT 11T308FN-25Q (roughing) DCGT 11T304FN-25Q (finishing) Grade: H210T Roughing n: variable v c : m/min a p : 3 4 mm f: 0,2 0,4 mm Application data Finishing n: 1600 rev/min v c : 500 m/min a p : 0,25 mm f: 0,25 mm Workpiece: Steering component Problem / criteria Hole 38,8 +0,02/+0,05 R a max: 1 µm Fine/finish turning Result Insert with corner radius 0,4 mm R a 0,5 µm Insert with corner radius0,8 mm R a 0,3 µm Application data Material: AlSi 8, forged Machine: Tool: Insert: DCGT 11T304FN-25Q DCGT 11T308FN-25Q Grade: H210T v c : 470 m/min a p : 0,6 mm f: 0,07 mm 7
8 Headquarters: CERATIZIT S.A. Main site Luxembourg CERATIZIT Luxembourg Sarl Route de Holzem L-8232 Mamer Tel.: Fax: Main site Austria CERATIZIT Austria Gesellschaft m.b.h. A-6600 Reutte/Tyrol Tel.: +43 (5672) Fax: +43 (5672) Sales Companies Austria CERATIZIT Austria Gesellschaft m.b.h. A-6600 Reutte/Tyrol Tel.: +43 (5672) Fax: +43 (5672) Bulgaria CERATIZIT Bulgaria AG Boulevard Stoletov 157 BG-5301 Gabrovo Tel: +359 (66) Fax: +359 (66) China CERATIZIT China Ltd. Room Hollywood Centre 233 Hollywood Rd., Sheung Wan Hong Kong Tel.: +852 (2542)-1838 Fax: +852 (2854) France CERATIZIT France Sarl Offi ce Pontoise 20, Rue Lavoisier F Pontoise Tel.: +33 (1) Fax: +33 (1) Germany CERATIZIT Deutschland GmbH Offi ce Langenfeld Hans-Böckler-Straße 10 D Langenfeld Tel.: +49 (2173) Fax: +49 (2173) CERATIZIT Deutschland GmbH Offi ce Bad Urach Schützenstraße 29 D Bad Urach Tel.: +49 (7125) Fax: +49 (7125) Great Britain CERATIZIT UK Ltd. Cliff Lane Grappenhall Warrington WA4 3JX Tel.: +44 (1925) Fax: +44 (1925) India CERATIZIT India Pvt. Ltd. 58, Motilal Gupta Road Barisha IN Kolkata Tel.: +91 (33) Fax: +91 (33) Telex: ihm in Italy CERATIZIT Italia SpA Piazza F. Martelli, 7 I Milano Tel.: +39 (02) Fax: +39 (02) info.italia@ceratizit.com Japan CERATIZIT Japan Ltd , Mizuho Shizuoka Tel.: +81 (54) Fax: +81 (54) info.japan@ceratizit.com Luxembourg CERATIZIT Luxembourg Sarl Route de Holzem L-8232 Mamer Tel.: Fax: info@ceratizit.com Netherlands CERATIZIT Nederland B.V. Bergrand 224 NL-4707 At Roosendaal Tel.: +31 (165) Fax: +31 (165) info.nederland@ceratizit.com Spain CERATIZIT Ibérica SL Offi ce Pozuelo Vía de las Dos Castillas, 9c Portal 2, Bajo B E Pozuelo (Madrid) Tel.: +34 (91) Fax: +34 (91) info.iberica@ceratizit.com CERATIZIT Ibérica SL Offi ce Bilbao Avda. Mazarredo 41 1 Izqda. E Bilbao Tel.: +34 (944) Fax: +34 (944) info.bilbao@ceratizit.com USA CERATIZIT USA Inc. 777 Old Clemson Road Columbia South Carolina Toll free: +1 (800) Tel.: +1 (803) Fax: +1 (803) info.usa@ceratizit.com We reserve the right to make technical changes for improvement of the product. 252/ EN 10.03
HSC-11 Milling tools for aluminium machining
hard material matters Milling tools for aluminium machining CERATIZIT - the parent companies INTRODUCTION Headquarters and parent company in MAMER / Luxembourg Parent company in REUTTE / Austria Direct
More informationHSC-11 Milling tool for aluminium machining
Milling tool for aluminium machining CERATIZIT secrets of success Secrets of success INTRODUCTION CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
More information9605 with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge.
with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge. NEW TURNING GRADE FOR DIFFICULT-TO-MACHINE MATERIALS LESS SCRAP. LESS FAILURE. LESS STRESS. MAKE US PROVE IT 960. YOUR ANSWER TO DIFFICULT-TO-MACHINE
More informationYNMG16 NEW. Indexable inserts for profiling. 25 corner angle applicable for a variety of machining. Keeping the Customer First.
Keeping the Customer First Tungaloy Report TE0308-E1 Indexable inserts for profiling YNMG16 NEW 25 corner angle applicable for a variety of machining YNMG is Tungaloy s most recent innovative development
More informationWelcome to a radically different approach to cancer treatment.
Welcome to a radically different approach to cancer treatment. Yesterday s boundaries are today s starting points. Introducing the TrueBeam system for radiotherapy and the TrueBeam STx system for radiosurgery.
More informationNEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning
Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased
More informationCERATIZIT 3x3 the new complete package for steel turning introduced at AMB
PRESS RELEASE CERATIZIT 3x3 the new complete package for steel turning introduced at AMB Economical combination of carbide grade and chip groove for every machining situation CERATIZIT Austria GmbH, AT-Reutte/Tyrol,
More informationQuick Change Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
More informationTOOLMAKER SOLUTIONS BY CERATIZIT INNOVATION
TOOLMAKER SOLUTIONS BY CERATIZIT INNOVATION HIGHLIGHTS ROUND TOOL MATERIALS 2016 EN > 90 YEARS OF EXPERIENCE > 20PRODUCTION SITES WORLDWIDE > 100EMPLOYEES IN R&D > 5,800 CARBIDE EXPERTS > 10,000,000,000
More informationKeeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
More informationRF 100 A. The specialist for aluminium and Al-wrought alloys
- excellent surface quality for finishing operations - up to 80 % higher feed rates thanks to - innovative cross cutting face geometry RF 100 A The specialist for aluminium and Al-wrought alloys Guhring
More informationCompany Profile. Jongen. Werkzeugtechnik
Company Profile Jongen Werkzeugtechnik Company Profile Jongen Werkzeugtechnik GmbH has been founded in 1974 and has its headquarter in Willich, near Düsseldorf, Germany. Jongen Werkzeugtechnik GmbH is
More informationAUTOMOTIVE TAPPING ENGINEERED SOLUTIONS
AUTOMOTIVE TAPPING ENGINEERED SOLUTIONS Material: AlMgSi Alloys MINIMAL LUBRICATION FOR MAXIMUM RESULTS CARBIDE FORMING TAPS AL-IK Specially developed thread forming geometry and coating with the aid of
More informationB216E FMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING
FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING B216E FMAX 2018.04 FMAX HIGH FEED MILLING CUTTER FOR FINISHING ULTRA HIGH EFFICIENCY MACHINING The ultra fine pitch design
More informationMAXIMILL SHOULDER MILLING SYSTEM PRODUCT INFORMATION. Presentation _Customer
MAXIMILL 491 90 SHOULDER MILLING SYSTEM PRODUCT INFORMATION Presentation _Customer 2 \ MAXIMILL 491 PRODUCT LAUNCH AGENDA General information Overall message Unique sales proposition Technical details
More informationTURNING. General turning inserts overview Application instruction of general turning inserts. General turning inserts code key
TURNING A22-A26 A27-A49 A50-A140 A50-A51 A52-A53 A54-A114 A54-A88 A89-A114 A115-A137 A116-A117 A118-A120 A121-A137 A138-A140 A138-A139 A140 inserts instruction of general inserts inserts inserts code key
More informationKeeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
More informationB223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING
MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING 2018.10 B223E MULTI-FUNCTIONAL - FOR CENTERING AND CHAMFERING Centering Hole Chamfering Edge Chamfering V-grooving FEATURES THINNED POINT GEOMETRY
More informationFMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING HIGH FEED MILLING CUTTER FOR FINISHING
FMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING HIGH FEED MILLING CUTTER FOR FINISHING FMAX HIGH FEED MILLING CUTTER FOR FINISHING ULTRA HIGH EFFICIENCY MACHINING The
More informationNew WMT Grooving Geometry PH Geometry
Page - - New WMT Geometry PH Geometry WIDIA has added the top-selling chipmaker geometry to the WMT platform - the PH geometry. Previously under the Manchester brand, the chipmaker geometry is a high performance
More informationHow to reduce vibration in metal cutting. Turning
How to reduce vibration in metal cutting Turning Introduction Vibration in metal cutting is familiar to every machine tool operator. This phenomena is recognised in operations such as internal turning,
More informationCoroMill QD. High-security groove milling
CoroMill QD High-security groove milling The main challenge in groove milling is usually chip evacuation, especially when machining deep and narrow grooves. CoroMill QD is the first cutter of its kind
More informationThe new generation end mill series. Ideal for efficient and economical machining of general milling applications.
New vibration control solid carbide end mill series SHV, MHV TAR vibration control end mill series The new generation end mill series. Ideal for efficient and economical machining of general milling applications.
More informationHigh productivity with newly designed wiper edge geometry
Positive wiper insert WP High productivity with newly designed wiper edge geometry Excellent surface roughness and smooth chip control during high feed machining. High quality surface finish with no galling.
More informationInnovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
More informationGrinding with style. -Abrasive web belts for fine grinding metal
A b r a s i v e s Grinding with style. -Abrasive web belts for fine grinding metal All s well that ends well -Abrasiv 3 benefits of webrax abrasive web belts 1. The backing Our abrasive web belts are manufactured
More informationPowerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner powerful for the Energy technology Taps for ISO metric threads, M16 - M39 SW d2 l 1 l 2 d 1 d k Guhring no. 778 Standard DIN 2184-1
More informationPowerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner Industrial sectors such as transmission, turbine and energy plant manufacturers require exceptionally large threads. For exactly such
More informationSERIES 43 3-Flute S-CARB End Mills for Aluminum
SERIES 43 3-Flute S-CARB End Mills for Aluminum S-Carb Series 43 3-Flute Features and Benefits Engineered Flute Design Effective chip removal at high feed rates Lower cutting forces than comparable products
More informationThe Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology
The Leitz power package for window and door production on CNC controlled machines RipTec ripple technology HSC technology Combined window tool systems Light metal alloy tools, coated drills and router
More informationReaming. MAPAL MonoReam. Systematic versatility NEW
Reaming MAPAL MonoReam Systematic versatility NEW MAPAL MonoReam With the newly developed multi-bladed reamers in the 600, 700 and 800 series, MAPAL is offering a new, simple, highperformance, standardised
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationTOOLS NEWS B228G. Ceramic End Mills. CERAMIC Corner Radius End Mills. Ultra high productivity for nickel based heat resistant alloys CERAMIC
Ceramic End Mills TOOLS NEWS B228G CERAMIC Corner Radius End Mills Ultra high productivity for nickel based heat resistant alloys CERAMIC CERAMIC End Mill Series From difficult-to-cut to easy-to-cut! Generation
More informationKeysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics. Preliminary Data Sheet
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics Preliminary Data Sheet The Keysight Technologies, Inc. E1834 family of beam delivery optics uses high performance mounts to meet the pointing
More informationCutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
More informationA660A OIL & GAS APPLICATIONS
A660A OIL & GAS APPLICATIONS INDEX Oil & Gas COUPLING 3 6 INNER SLEEVE 4 7 BOP 5 FLANGED ROCK BIT INNER SLEEVE BOP INNER SLEEVE BOP FLANGED COUPLING COUPLING 2 ROCK BIT ROCK BIT COUPLING Work Materials:
More informationCarbide Drill for Hardened Steel EHSE-TH. Epoch TH Hard Drill. New Product News No.405E
Carbide Drill for Hardened Steel Epoch TH Hard Drill New Product News No.0E- 17-7 TH coating and guides with double margins make it last even longer. EDM, which is generally used for drilling hardend steel,
More informationNo Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,
NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,
More informationRT 100 T NEW. Solid carbide spiral-flute deep hole drills. Now from 15 to 40 x D. Made by Guhring
Solid carbide spiral-flute deep hole drills NEW Now from 15 to 40 x D Made by Guhring ex-stock range Available ex-stock now: The spiralflute deep hole drill. The program includes standard drills for drilling
More informationGrade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09
Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05
More informationHOLLFELDER CUTTING TOOLS. Main Catalog H6
HOLLFELDER CUTTING TOOLS Main Catalog H6 HOLLFELDER-GÜHRING CUTTING TOOLS Your competent partner in the area of metal chip removal. At our two company locations in Nuremberg und Zorbau (Germany) we design
More informationVSM11. WIDIA Victory Shoulder Mill 11 VSM11
Victory Shoulder Mill 11 ADVANCES 2015 WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for
More informationIn hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO:
Guhring at EMO 2013 Intelligence in Production with precision tools from Guhring In the spirit of the motto of this year s EMO, from 16th to 21th September in Hanover, Guhring is introducing trendsetting
More informationAUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
More informationMASTER CATALOGUE. Beyond EADE Solid Ceramic End Mills.
MASTER CATALOGUE Beyond EADE Solid Ceramic End Mills Beyond EADE Solid Ceramic End Mill Primary Application EADE Solid Ceramic End Mills offer higher productivity and tool life in roughing nickel-based
More informationNew Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
More informationCONTENTS WELCOME TO THE WORLD OF HIGH-SPEED INNOVATION
Colibri Spindles ltd. Lavon Industrial Park, 2011800, Israel Tel +972 4 9089100 Fax +972 4 9589061 marketing@colibrispindles.com www.colibrispindles.com HSM JET SPINDLE TJS-CS01-07-2017 Case Study Summaries
More information11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate
s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting
More informationCHAPTER C. Width of cut. Tool type. DOC t max. Page number
Step #1: Establish bore diamter Step #2: Find Depth of ut (DO) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths HAPTER DO t max.063
More informationDouble-Side 45 Face Milling
5 Double-Side 45 Face Milling 23 of 26 Double-Side 45 Face Milling SNEU+MFB145&MFB245 Introduction Double-side general 45 face milling; Thicker negative insert design, with high strength, to assure stability.
More informationTechnology Workpieces and processes in the automotive industry
Technology Workpieces and processes in the automotive industry New machining solutions for that extra productivity and cost-effectiveness MAPAL technology: Tap the potential savings during the machining
More informationINNOVATIONS CATALOGUE HARVI III Ball Nose
www.kennametal.com INNOVATIONS CATALOGUE HARVI III Ball Nose HARVI III Ball Nose High-Performance Solid Carbide End Mills Primary Application HARVI III Ball Nose tooling takes high-performance profiling,
More informationHONING SUPERFINISHING HONING TOOLS PRECIDOR HIGH PRECISION EXTREME TOOL LIFE MOST ECONOMICAL.
HONING SUPERFINISHING HONING TOOLS PRECIDOR HIGH PRECISION EXTREME TOOL LIFE MOST ECONOMICAL www.nagel.com OUR KNOW-HOW YOUR ADVANTAGE Fascination Technology Know-how NAGEL is the world s leading specialist
More informationApplication range. feed rate (mm/rev) 0.1~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~0.
Grades KORLOY Chip Breaker For Turning VG 0.1~0.35 0.5~2.5 For finishing Ensures stable chip flow even at very small depth of cut. Suitable for copying. VQ 1.0~3.0 For Medium to Finish Cutting Strong cutting
More informationInnovations within traditional ISO turning technology just as important as high tech alternatives.
Innovations within traditional ISO turning technology just as important as high tech alternatives. Cost reduction is among other things possible by adapting the tools and reducing the cutting data with
More informationCutting Tools Overview #2 - Turning
Cutting Tools Overview #2 - Turning Last month's column was an overview of some of the different types of tools used in the milling process. This month we are going to discuss some of the most common cutting
More informationJet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
More informationspecifications TrueBeam STx System
specifications TrueBeam STx System TrueBeam STx s The TrueBeam STx system specifications in this document are identified as belonging to two categories, performance specifications and descriptive specifications.
More informationCAT.AC6040M/AC6030M.3/15. Carbide Grades for Turning AC6030M / AC6040M. AC6030M & AC6040M Grades for machining stainless steels M
CAT./.3/15 Carbide Grades for Turning / & Grades for machining stainless steels M Features & Benefits s new Absotech platinum PVD grade coating, with fine grains and high hardness, achieved 1.5 times higher
More informationbotek Solid drill head Type 70 A,70 B
DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS Solid drill head botek Type 70 A,70 B Deep hole drilling tools, system BTA with indexable inserts and guide pads for solid drilling Drilling range: 5,00 64,99
More informationMilling Cutter for Heavy Roughing
15 15 Milling Cutter for Heavy Roughing Notched insert reduces cutting force, chattering and enables efficient cutting. Large depth of cut and high feed rate enable high effi ciency cutting. TZE00047 changes
More informationOn-Edge, Multi-Tooth, Top Notch, and Laydown Inserts. Standard and Custom Threading Solutions for the Energy Industry
On-Edge, Multi-Tooth, Top Notch, and Laydown Inserts Standard and Custom Threading Solutions for the Energy Industry Optimize Your Oil and Gas Operations with Kennametal s Comprehensive Line of Standard
More informationDeburring and chamfering
eburring and chamfering for smooth finishing operations 2 Chamfering in smallest dimensions CrazyMill Frontchamfer matches ideally the existing cutting tool program of Mikron Tool. Available from diameter
More informationWiper Inserts for Steel Turning
Product Brochure Wiper s for teel Turning WE & WF Negative Wiper s in Carbide and Cermet NEW OLID ROUND OLUTION DRILLING OLUTION TURNING OLUTION MILLING OLUTION Two Ways to ave! 1) Buy 20 s, Get FREE (Promo
More informationFlexibility and efficiency on high accuracy machining
Permanent-electro magnetic systems for turning and vertical grinding Flexibility and efficiency on high accuracy machining No piece distortion or deformation Uniform clamping: minimized vibrations Complete
More informationGARANT PPC THE NEW STRATEGY FOR VERY HIGH PRODUCTIVITY.
INNOVATION Net prices, valid until. 07. 08 GARANT C THE NEW STRATEGY FOR VERY HIGH RODUCTIVITY. The newly developed GARANT solid carbide barrel milling cutters reduce process times and increase surface
More informationAQUA DRILL EX FLAT. Simple Process Less Burr
Simple Process Less Burr 1 Drilling innovation with great performance New drilling technology Slope, counter boring, thin plate, blind tap hole, hole correction in one drill. Pre hole of Slope Counter
More informationDiamond Burnishing Tools
Diamond Burnishing Tools www.cogsdill.co.uk Diamond burnishing Overview The Cogsdill Diamond Burnishing Tool is designed to produce high quality, low microinch burnished finishes on shafts, large bores,
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationArCut X for brilliant surfaces in next to no time
passion for precision ArCut X for brilliant surfaces in next to no time New: ToolExpert ArCut X cutting data calculator ArCut X is a productivity booster for finishing with excellent surface quality [
More informationCarbide Miniature Drill with Oil Hole WHMB-TH MINIATURE DRILL WHMB. New Product News No.1603E
Carbide Miniature Drill with Oil Hole MINIATUE DI WHMB New Product News No.1E- 1-9 MINIATUE DI WHMB drills small-diameter holes with high efficiency and high accuracy. Features of 01 02 0 04 New flute
More informationJANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
More informationCoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
More information20 LEAD FACE MILL SERIES DM6G, DM5G
20 LEAD FACE MILL SERIES DM6G, DM5G Diameters Cutting Edge Length Insert Corner 1.500" to 8.000".230".030"R Facing Lead Angle Coolant Thru K H 70º.23 D3 D 1 D 2 D 3 Coolant Thru Effective Cutter Number
More informationAutomotive solutions for ISO K
Automotive solutions for ISO K When machining in ISO K materials, you need tough tools that can withstand high abrasive wear and frittering, and deliver secure and precise machining again and again. This
More informationMachining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba
Machining Processes Used to Produce Various Shapes 1 Homework Assignment Due Wensday 28/4/2010 1. Show that the distance lc in slab milling is approximately equal to for situations where D>>d. (see Figure
More information30 Bevel High Feed Cutter 13mm & 19mm IC Insert Sizes
0 Bevel igh Feed Cutter mm & mm IC Insert Sizes Insert Series: SDES SDMS SDES SDMS Face Mills: MP (mm IC) MP (mm IC) MM (mm IC) MM (mm IC) Insert Grades: IN00 IN00 IN0 IN0 IN0 IN Applications: Die & Mold
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationThe cutting edge. High-temperature brazing powder
The cutting edge High-temperature brazing powder High-temperature brazing: Creating strong bonds Brazing is a process that joins together two pieces of metal. The bonding material is a specially formulated
More informationCNC machining centres. accord 30 fx. CNC machining centre
CNC machining centres accord 30 fx CNC machining centre accord 30 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB Circular Saw Machine Series for Bar Material CMB 75/100/150 CNC Circular saw machines for use of carbide tools The ideal solution for sawing bar material
More informationIndexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
More informationTM-533-T/R TACT Switches
Features: Sharp click feel with a positive tactile feed-back. Due to small movement distance (stroke), user experiences distinct sensation when the switch clicks into place. Ultraminiature and light weight
More informationDRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
More informationwide belt sanders dmc sd 10 automatic wide belt sanders
wide belt sanders EVERYTHING YOU NEED WITH NO COMPROMISES 1 SOLID FLEXIBLE COMPACT READY EFFICIENT Sturdy and ergonomic steel main frame to satisfy all requirements One unit, three possible configurations
More informationSOFT-CUT High-speed milling with minimal power consumption
SPK-CUTTING PRODUCTIVITY / PRODUKTIVITÄT COSTS / KOSTEN ADDED VALUE T = / WERKZEUGE T = / TECHNOLOGIE A = / ANWENDUNG A = ADDED VALUE / MEHRWERT SOFT-CUT High-speed milling with minimal power consumption
More informationCNC machining centres. accord 40 fx. CNC machining centre
CNC machining centres accord 40 fx CNC machining centre accord 40 fx CNC machining centre Machining centre with modular composition of new generation for the production of windows, doors, stairs, solid
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationTOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!
TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The
More informationTOOLS NEWS B076G. Series Expansion Update
TOOLS NEWS 2013.10 Update B076G Solid CBN Grade for Cast Iron and Sintered Alloy Good balance of wear and fracture resistance from the high-performance sintering technology. New solid CBN for improved
More informationBUY 1 Toolholder and 1 Cartridge. and GET 10 FREE INSERTS! up to $ value. Built for Productivity!
KOOL Cut MODULAR Turning & Grooving System BUY 1 Toolholder and 1 Cartridge 10 FREE INSERTS! up to $229.40 value TM KOOL Cut TM Modular Turning & Grooving Built for Productivity! Interchangeable s & Cartridges
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB circular saw machine series for bar material CMB-75/100/150 CNC Circular saw machine series for the use of carbide tools The optimum solution for the
More informationVSM11. WIDIA Victory Shoulder Mill 11 VSM11
WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for versatility, low horsepower consumption,
More informationOptimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
More information// HIGH PERFORMANCE DRILLS. Solid carbide High Performance Tools
EN // HIGH PERFORMANCE DRILLS Solid carbide High Performance Tools High Performance Drills History By founding the tool grinding shop K. H. Müller GbR on April 1st, 1981, Karl-Heinz and Siglinde Müller
More informationProcess Control HPP-25
Process Control HPP-25 Riveting process monitoring 6 different control parameters Touchscreen operation Windows diagnostics software Industrie 4.0 ready...joining is our business worldwide! Process Control
More informationHighly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy.
B041G CDV for stainless steel turning Excellent toughness in relation to notch wear resistance. Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. yminimizing
More informationDesign for machining
Multiple choice questions Design for machining 1) Which one of the following process is not a machining process? A) Planing B) Boring C) Turning D) Forging 2) The angle made between the rake face of a
More informationM4000 High performance made universal.
_ MACHINING COMPETENCE M4000 High performance made universal. Product competence Milling MILLING COMPETENCE COMBINED IN ONE UNIVERSAL SYSTEM. Shoulder milling cutter M4132 Ø 25 80 mm a pmax = 9 mm Adapter
More information