1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description
|
|
- Lizbeth May
- 6 years ago
- Views:
Transcription
1 Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by /µs Waveform P PPM W (Fig.2(Note, (Note 2 Power Dissipation on Infinite Heat Sink at T L =5 O C P D 5. W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3 I FSM 2 A Maximum Instantaneous Forward Voltage at 5A for Unidirectional V F 3.5 V Only Operating Temperature Range T J -65 to 5 C Storage Temperature Range T STG -65 to 75 C Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient AGENCY FILE NUMBER E2353 R θjl 2 C/W R θja C/W Notes:. Non-repetitive current pulse, per Fig. 4 and derated above T J (initial =25 O C per Fig Mounted on copper pad area of.2x.2 (5. x 5.mm to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Functional Diagram Bi-directional W peak pulse power capability at /μs waveform, repetition rate (duty cycles:.% For surface mounted applications to optimize board space Low profile package Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD2A per its table 4a and 4c IEC ESD 3kV(Air, 3kV (Contact ESD protection of data lines in accordance with IEC EFT protection of data lines in accordance with IEC Built-in strain relief V T J = V C x (+αt x (T J - 25 (αt:temperature Coefficient, typical value is.% Glass passivated chip junction Fast response time: typically less than.ps from V to BV min Excellent clamping capability Low incremental surge resistance Typical I R less than μa when V BR max>2v High temperature to reflow soldering guaranteed: 26 C/4sec Plastic package is flammability rated V- per Underwriters Laboratories Meet MSL level, per J-STD-2, LF maximun peak of 26 C Matte tin lead free Plated Available in breakdown Voltage from 6.8V to 8V specially designed for automotive applications Offers high-surge rating in compact package: bridges the gap between 6W and.5kw Halogen free and RoHS compliant Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(sn (IPC/JEDEC J-STD- 69A. Applications TVS devices are ideal for the protection of I/O Interfaces, V CC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Additional Infomarion Cathode Anode Uni-directional Datasheet Resources Samples
2 Surface Mount W > KSMB series Electrical Characteristics (T A =25 C unless otherwise noted Part Number (Uni Part Number (Bi Marking Reverse Stand off Voltage V R (Volts Breakdown Voltage V BR I T UNI BI MIN MAX Test Current I T (ma Maximum Clamping Voltage V I pp (V Maximum Peak Pulse Current I pp (A Maximum Reverse Leakage I V R (µa KSMB6.8A KSMB6.8CA AA NA x KSMB7.5A KSMB7.5CA AB NB x KSMB8.2A KSMB8.2CA AC NC x KSMB9.A KSMB9.CA AD ND x KSMBA KSMBCA AE NE x KSMBA KSMBCA AF NF x KSMB2A KSMB2CA AG NG x KSMB3A KSMB3CA AH NH x KSMB5A KSMB5CA AI NI x KSMB6A KSMB6CA AJ NJ x KSMB8A KSMB8CA AK NK x KSMB2A KSMB2CA AL NL x KSMB22A KSMB22CA AM NM x KSMB24A KSMB24CA AN NN x KSMB27A KSMB27CA AO NO x KSMB3A KSMB3CA AP NP x KSMB33A KSMB33CA AQ NQ x KSMB36A KSMB36CA AR NR x KSMB39A KSMB39CA AS NS x KSMB43A KSMB43CA AT NT x KSMB47A KSMB47CA AU NU x KSMB5A KSMB5CA AV NV x KSMB56A KSMB56CA AW NW x KSMB62A KSMB62CA AX NX x KSMB68A KSMB68CA AY NY x KSMB75A KSMB75CA AZ NZ x KSMB82A KSMB82CA BA OA x KSMB9A KSMB9CA BB OB x KSMBA KSMBCA BC OC x KSMBA KSMBCA BD OD x KSMB2A KSMB2CA BE OE x KSMB3A KSMB3CA BF OF x KSMB5A KSMB5CA BG OG x KSMB6A KSMB6CA BH OH x KSMB7A KSMB7CA BI OI x KSMB8A KSMB8CA BJ OJ x For bidirectional type having V R of volts and less, the I R limit is double. For parts without A V BR is ± % and V C is 5% higher than with A parts. Agency Approval
3 Surface Mount W > KSMB series I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR IT VF V Vc VBR VR IT IR IR IT VRVBR Vc V Ipp Ipp P PPM Peak Pulse Power Dissipation -- Max power dissipation V R Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation V BR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I T V C Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current I R V F Reverse Leakage Current -- Current measured at V R Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T A =25 C unless otherwise noted Figure - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve Voltage Transients TJ initial = Tamb Voltage or Current Voltage Across TVS Current Through TVS P PPM -Peak Pulse Power (kw.2x.2" (5.x5.mm Copper Pad Area... Time t d -Pulse Width (ms continues on next page.
4 Surface Mount W > KSMB series Ratings and Characteristic Curves (T A =25 C unless otherwise noted (Continued Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform Peak Pulse Power (P PP or Current (I PP Derating in Percentage % T J - Initial Junction Temperature (ºC I PPM - Peak Pulse Current, % I RSM 5 5 td tr=µsec Peak Value IPPM Half Value IPPM 2 IPPM ( TJ=25 C Pulse Width(td is defined as the point where the peak current decays to 5% of IPPM /µsec. Waveform as defined by R.E.A t-time (ms Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance Cj (pf R Bi-directional V=V R Uni-directional V=V Tj=25C f=.mhz Vsig=5mVp-p.... V BR - Reverse Breakdown Voltage (V Transient Thermal Impedance ( C/W.... T -Pulse Duration (s P Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values 2 I FSM - Peak Forward Surge Current (A IF - Peak Forward Current(A. Number of Cycles at 6 Hz V F -Peak Forward Voltage(V
5 Temperature (T Transient Voltage Suppression Diodes Surface Mount W > KSMB series Soldering Parameters Reflow Condition Pre Heat Lead free assembly - Temperature Min (T s(min 5 C - Temperature Max (T s(max 2 C - Time (min to max (t s 6 8 secs Average ramp up rate (Liquidus Temp (T A to peak T S(max to T A - Ramp-up Rate Reflow - Temperature (T A (Liquidus 27 C 3 C/second max 3 C/second max - Time (min to max (t s 6 5 seconds Peak Temperature (T P 26 +/-5 C Time within 5 C of actual peak Temperature (t p 2 4 seconds Ramp-down Rate 6 C/second max Time 25 C to peak Temperature (T P 8 minutes Max. Do not exceed 26 C T P T L T s(max T s(min 25 C t s Preheat t 25 C to Peak Environmental Specifications High Temp. Storage Ramp-up Time (t t p JESD22-A3 t L Critical Zone T L to T P Ramp-down Physical Specifications Weight Case Polarity.3 ounce,.93 grams JEDEC DO24AA. Molded plastic body over glass passivated junction Color band denotes cathode except Bidirectional. HTRB JESD22-A8 Temperature Cycling JESD22-A4 MSL JEDEC-J-STD-2, Level H3TRB JESD22-A Terminal Matte Tin-plated leads, Solderable per JESD22-B2 RSH JESD22-A Dimensions I A D E DO-24AA (SMB J-Bend J Cathode Band (for Uni-directional products only B F G K L H C Dimensions Inches Millimeters Min Max Min Max A B C D E F G H I J K L Solder Pads (all dimensions in mm
6 Surface Mount W > KSMB series Part Numbering System Part Marking System KSMB XXX C A Cathode Band (for Uni-directional products only 5% V BR VOLTAGE TOLERANCE F Littelfuse Logo SERIES V BR VOLTAGE BI-DIRECTIONAL XX YMXXX Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Part number Component Package Quantity Packaging Option Packaging Specification KSMBxxxXX DO-24AA 3 Tape & Reel - 2mm tape/3 reel EIA STD RS-48 Tape and Reel Specification.57 (4..47 (2. Cathode.35 (8..59 DIA (.5 Cover tape.8 (2.2 Arbor Hole Dia. 3. (33 Dimensions are in inches (and millimeters..49 (2.5 Direction of Feed
P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationTPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description
TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional
TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationSMBJ-HRA Series. Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HRA Series. Description. Uni-directional
SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationTransient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series
Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.
RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationSMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional
SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series
SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSMCG-HRA Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HRA series
SMCG-HRA Series RoHS Pb e3 Description The SMCG-HRA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationSMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional
SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationSMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HRA Series. Description. Features = V J V BR
SMDJ-HRA Series RoHS Pb e3 Uni-directional VS Diode Arrays (SPA Family of Products) Bi-directional Description The SMDJ-HRA High Reliability series is designed specifically to protect sensitive electronic
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationTransient Voltage Suppression Diodes Surface Mount 1500W > SMCJ-HRA series. Bi-directional 1500 W 6.5 W 200 A V BR 3.5/5.0 V. -55 to 150 C 15 C/W
RoHS Uni-directional Description Bi-directional The SMCJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and
More informationSurface Mount ESD Protection Diodes
Surface Mount ESD Protection Diodes 1 2 MARKING (example only) 20278 17249 XX YY Bar = cathode marking YY = type code (see table below) XX = date code 22623 DESIGN SUPPORT TOOLS click logo to get started
More informationS M A J x x x C A. Reverse Stand-Off Voltage
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More information