Optical Projection Printing and Modeling
|
|
- Opal Long
- 6 years ago
- Views:
Transcription
1 Optical Projection Printing and Modeling Overview of optical lithography, concepts, trends Basic Parameters and Effects (1-14) Resolution Depth of Focus; Proximity, MEEF, LES Image Calculation, Characterization (15-39) Includes Hands On simulation using LAVA, SIMPL_display Technology Advances (40-52) Resolution Enhancement, Immersion, Double Patterning, EUV, Imprint Suggested reading and sources: Griffin: Plummer, Deal and Chapter 5 Sheats and Smith: , , , , 121 Wong RET: 31-45, 55-58, 83; Chris Mack Simulation Examples 1
2 ASML 5500/ nm Wavelength Tool Fly s Eye Sigma Aperture Mask Port Condenser Lens Light path Hexagonal Light Pipe Output Objective Lens To Wafer 2
3 EE 143 Optical Lithography Lecture, A.R. Neureuther, Sp 2006 Projection Printer Examples Wafer Mask Stepper Mask Scanner Wafer Sheats and Smith 3
4 Optical Projection Printing Parameters #0 Key Parameters: λ, NA, σ Wavelength λ = 248 nm) Numerical Aperture NA = sin (θ) = 0.5 Partial Coherence Factor σ = (NAc/NAo) = 0.3 4
5 Parameters for Microlab Projection Printers Working Resolution Tool λ nm NA σ k 1 θ LEN deg θ ILL deg k 1 λ/na nm λ/(4na) nm TFR nm Μ Canongh GCA-g GCA-i ASML- DUV Ann TFR = Total focus range = 2 x Rayleigh Depth of Focus = 2DOF λ M is the demagnification factor DOF = k L LINEWIDTH = k 1 NA λ ( ) 2 2 NA 5 5
6 Optical System Point Spread Function Mask Lens Wafer Image of a pin hole (Diffraction limited) Relationship for electric fields The small pinhole due to its size diffracts uniformly over all angles. Pin hole This diffraction uniformly fills the lens pupil. The lens re-phases the remaining emerging rays so that they re-converge at the wafer with the same relative phases and uniform magnitude. The electric field at the waver is thus the inverse Fourier transform of a disk = Airy Function. The intensity is the time average of the square of the electric field = (Airy function) 2 The pattern shape is independent of the shape of the pin hole with diameter 1.22λ/NA. The peak E is proportional to pin hole area the peak I is proportional to Area 2 or (dimension) 4. 6
7 Resolution in Projection Printing f = focal distance d = lens diameter Point spread function Null position F# = f/d f f 1.22λ = 0.61λ = d d 2 λ NA Minimum separation of a star to be visible. PDG Fig. Ch 5 7
8 Resolution ~ Transverse Variation Larger angles give higher resolution φ #1 Resolution = P/2 = λ/(2 sinφ) = 0.5(λ/NA)) λ = 248 nm λ TRANS = λ/sinφ = 3.22λ = 800nm Assumes one wave is onaxis and the other off-axis The most useful rays in forming an image are those with the same pitch as the pattern Wave graphic by Ongi Englander and Kien Lam 8
9 Depth of Focus: Phase change on vertical axis Plane of Best Focus 4.75λ 5.0λ Plane of Rayleigh l/4 Defocus Wave graphic by Ongi Englander and Kien Lam Observe phase along a vertical line 9
10 EE 143 Optical Lithography Lecture, A.R. Neureuther, Sp 2006 Depth of Focus in Projection Printing Ray Angle View #2 Depth of Focus = λ/(2na2) Result must be modified for a) High NA, and b) Two waves at arbitrary angles. PDG Fig. Ch 5 10
11 Normalized Parameters For any wavelength λ and numerical aperture NA. λ L LINEWIDTH = k1 DOF = k NA λ = 365, 248,193, 157, 13.4 nm NA = 0.167, 0.38, 0.5, 0.63, 0.7, 0.75, λ ( ) 2 2 NA Instead of recalculation for every new combination of λ and NA a universal catalog of image behavior can be utilized if we first determine the k 1 and k 2 factors in the actual system for the linewidth and defocus and look up results in a data based based on λ = 0.5µm and NA =0.5. λ 0.5µ m L LINEWIDTH = k1 = k1 = k1µ m NA 0.5 λ 0.5µ m DOF = k2 = k2 = k2µ m NA ( ) ( ) 11
12 Optical Proximity Effect - lateral influence function E-field Point Spread Function for Coherent Imaging: illuminator Condenser lens mask Finite size of projection lens (i.e. low-pass filter) images point on mask as Airy pattern on wafer. [Airy = IFT (disk) = f(l/na)] Projection lens wafer λ/na 12
13 Various Types of Image Distortion Proximity effect with neighbors Nonlinearity with size End shortening Corner rounding Wong RET 13
14 Optical Proximity Correction (OPC) Called Processl Proximity Correction (PPC) when compensations for other process effects are included. Wong RET 14
Purpose: Explain the top 10 phenomena and concepts. BPP-1: Resolution and Depth of Focus (1.5X)
Basic Projection Printing (BPP) Modules Purpose: Explain the top 10 phenomena and concepts key to understanding optical projection printing BPP-1: Resolution and Depth of Focus (1.5X) BPP-2: Bragg condition
More informationOPC Scatterbars or Assist Features
OPC Scatterbars or Assist Features Main Feature The isolated main pattern now acts somewhat more like a periodic line and space pattern which has a higher quality image especially with focus when off-axis
More informationPurpose: Explain the top advanced issues and concepts in
Advanced Issues and Technology (AIT) Modules Purpose: Explain the top advanced issues and concepts in optical projection printing and electron-beam lithography. h AIT-1: LER and Chemically Amplified Resists
More informationThe Formation of an Aerial Image, part 3
T h e L i t h o g r a p h y T u t o r (July 1993) The Formation of an Aerial Image, part 3 Chris A. Mack, FINLE Technologies, Austin, Texas In the last two issues, we described how a projection system
More informationThe Formation of an Aerial Image, part 2
T h e L i t h o g r a p h y T u t o r (April 1993) The Formation of an Aerial Image, part 2 Chris A. Mack, FINLE Technologies, Austin, Texas In the last issue, we began to described how a projection system
More informationOptical Proximity Effects
T h e L i t h o g r a p h y E x p e r t (Spring 1996) Optical Proximity Effects Chris A. Mack, FINLE Technologies, Austin, Texas Proximity effects are the variations in the linewidth of a feature (or the
More informationMICRO AND NANOPROCESSING TECHNOLOGIES
MICRO AND NANOPROCESSING TECHNOLOGIES LECTURE 4 Optical lithography Concepts and processes Lithography systems Fundamental limitations and other issues Photoresists Photolithography process Process parameter
More informationLithography. 3 rd. lecture: introduction. Prof. Yosi Shacham-Diamand. Fall 2004
Lithography 3 rd lecture: introduction Prof. Yosi Shacham-Diamand Fall 2004 1 List of content Fundamental principles Characteristics parameters Exposure systems 2 Fundamental principles Aerial Image Exposure
More informationLine End Shortening. T h e L i t h o g r a p h y E x p e r t (Spring 2000) Chris A. Mack, FINLE Technologies, Austin, Texas
Tutor29.doc: Version 2/15/00 Line End Shortening Chris A. Mack, FINLE Technologies, Austin, Texas T h e L i t h o g r a p h y E x p e r t (Spring 2000) Historically, lithography engineering has focused
More informationMore on the Mask Error Enhancement Factor
T h e L i t h o g r a p h y E x p e r t (Fall 1999) More on the Mask Error Enhancement Factor Chris A. Mack, FINLE Technologies, Austin, Texas In a previous edition of this column (Winter, 1999) I described
More informationWhat s So Hard About Lithography?
What s So Hard About Lithography? Chris A. Mack, www.lithoguru.com, Austin, Texas Optical lithography has been the mainstay of semiconductor patterning since the early days of integrated circuit production.
More information* AIT-5: Maskless, High-NA, Immersion, EUV, Imprint
Advanced Issues and Technology (AIT) Modules Purpose: Explain the top advanced issues and concepts in optical projection printing and electron-beam lithography. AIT-1: LER and CAR AIT-2: Resolution Enhancement
More informationOptical Lithography. Keeho Kim Nano Team / R&D DongbuAnam Semi
Optical Lithography Keeho Kim Nano Team / R&D DongbuAnam Semi Contents Lithography = Photolithography = Optical Lithography CD : Critical Dimension Resist Pattern after Development Exposure Contents Optical
More informationEE-527: MicroFabrication
EE-57: MicroFabrication Exposure and Imaging Photons white light Hg arc lamp filtered Hg arc lamp excimer laser x-rays from synchrotron Electrons Ions Exposure Sources focused electron beam direct write
More informationFeature-level Compensation & Control
Feature-level Compensation & Control 2 Lithography Andrew Neureuther and Costas Spanos, UCB Workshop & Review 04/15/2004 11/19/2003 - Lithography 3 Lithography: Andy Neureuther, UCB Research Themes: Linking
More informationHorizontal-Vertical (H-V) Bias
Tutor51.doc: Version 8/11/05 T h e L i t h o g r a p h y E x p e r t (November 005) Horizontal-Vertical (H-V) Bias Chris A. Mack, Austin, Texas A nanometer here, a nanometer there. Before long, you ve
More informationLecture 5. Optical Lithography
Lecture 5 Optical Lithography Intro For most of microfabrication purposes the process (e.g. additive, subtractive or implantation) has to be applied selectively to particular areas of the wafer: patterning
More informationTutor43.doc; Version 8/15/03 T h e L i t h o g r a p h y E x p e r t (November 2003)
Tutor43.doc; Version /15/03 T h e L i t h o g r a p h y E x p e r t (November 2003) Scattering Bars Chris A. Mack, KLA-Tencor, FINLE Division, Austin, Texas Resolution enhancement technologies refer to
More informationPhotolithography II ( Part 2 )
1 Photolithography II ( Part 2 ) Chapter 14 : Semiconductor Manufacturing Technology by M. Quirk & J. Serda Saroj Kumar Patra, Department of Electronics and Telecommunication, Norwegian University of Science
More informationOPTICAL LITHOGRAPHY INTO THE MILLENNIUM: SENSITIVITY TO ABERRATIONS, VIBRATION AND POLARIZATION
OPTICAL LITHOGRAPHY INTO THE MILLENNIUM: SENSITIVITY TO ABERRATIONS, VIBRATION AND POLARIZATION Donis G. Flagello a, Jan Mulkens b, and Christian Wagner c a ASML, 8555 S. River Parkway, Tempe, AZ 858,
More informationReducing Proximity Effects in Optical Lithography
INTERFACE '96 This paper was published in the proceedings of the Olin Microlithography Seminar, Interface '96, pp. 325-336. It is made available as an electronic reprint with permission of Olin Microelectronic
More informationECSE 6300 IC Fabrication Laboratory Lecture 3 Photolithography. Lecture Outline
ECSE 6300 IC Fabrication Laboratory Lecture 3 Photolithography Prof. James J. Q. Lu Bldg. CII, Rooms 6229 Rensselaer Polytechnic Institute Troy, NY 12180 Tel. (518)276 2909 e mails: luj@rpi.edu http://www.ecse.rpi.edu/courses/s18/ecse
More informationLECTURE 13 DIFFRACTION. Instructor: Kazumi Tolich
LECTURE 13 DIFFRACTION Instructor: Kazumi Tolich Lecture 13 2 Reading chapter 33-4 & 33-6 to 33-7 Single slit diffraction Two slit interference-diffraction Fraunhofer and Fresnel diffraction Diffraction
More informationSection 2: Lithography. Jaeger Chapter 2. EE143 Ali Javey Slide 5-1
Section 2: Lithography Jaeger Chapter 2 EE143 Ali Javey Slide 5-1 The lithographic process EE143 Ali Javey Slide 5-2 Photolithographic Process (a) (b) (c) (d) (e) (f) (g) Substrate covered with silicon
More informationMICROCHIP MANUFACTURING by S. Wolf
MICROCHIP MANUFACTURING by S. Wolf Chapter 19 LITHOGRAPHY II: IMAGE-FORMATION and OPTICAL HARDWARE 2004 by LATTICE PRESS CHAPTER 19 - CONTENTS Preliminaries: Wave- Motion & The Behavior of Light Resolution
More informationOptolith 2D Lithography Simulator
2D Lithography Simulator Advanced 2D Optical Lithography Simulator 4/13/05 Introduction is a powerful non-planar 2D lithography simulator that models all aspects of modern deep sub-micron lithography It
More informationOptical Requirements
Optical Requirements Transmission vs. Film Thickness A pellicle needs a good light transmission and long term transmission stability. Transmission depends on the film thickness, film material and any anti-reflective
More informationLecture Notes 10 Image Sensor Optics. Imaging optics. Pixel optics. Microlens
Lecture Notes 10 Image Sensor Optics Imaging optics Space-invariant model Space-varying model Pixel optics Transmission Vignetting Microlens EE 392B: Image Sensor Optics 10-1 Image Sensor Optics Microlens
More informationExperimental assessment of pattern and probe-based aberration monitors
SPIE 3 54-49 Experimental assessment of pattern and probe-based aberration monitors Garth C. Robins * and Andrew R. Neureuther Electronics Research Laboratory, Department of Electrical Engineering and
More informationSection 2: Lithography. Jaeger Chapter 2 Litho Reader. EE143 Ali Javey Slide 5-1
Section 2: Lithography Jaeger Chapter 2 Litho Reader EE143 Ali Javey Slide 5-1 The lithographic process EE143 Ali Javey Slide 5-2 Photolithographic Process (a) (b) (c) (d) (e) (f) (g) Substrate covered
More informationIIL Imaging Model, Grating-Based Analysis and Optimization
UNM MURI REVIEW 2002 IIL Imaging Model, Grating-Based Analysis and Optimization Balu Santhanam Dept. of EECE, University of New Mexico Email: bsanthan@eece.unm.edu Overview of Activities Optimization for
More informationOptical Components for Laser Applications. Günter Toesko - Laserseminar BLZ im Dezember
Günter Toesko - Laserseminar BLZ im Dezember 2009 1 Aberrations An optical aberration is a distortion in the image formed by an optical system compared to the original. It can arise for a number of reasons
More informationLens Design I Seminar 5
Y. Sekman, X. Lu, H. Gross Friedrich Schiller University Jena Institute of Applied Physics Albert-Einstein-Str 15 07745 Jena Lens Design I Seminar 5 Exercise 5-1: PSF scaling (Homework) To check the Airy
More informationLine End Shortening, part 2
Tutor31.doc: Version 8/17/00 Line End Shortening, part 2 T h e L i t h o g r a p h y E x p e r t (Fall 2000) Chris A. Mack, FINLE Technologies, A Division of KLA-Tencor, Austin, Texas As discussed in the
More informationSection 2: Lithography. Jaeger Chapter 2 Litho Reader. The lithographic process
Section 2: Lithography Jaeger Chapter 2 Litho Reader The lithographic process Photolithographic Process (a) (b) (c) (d) (e) (f) (g) Substrate covered with silicon dioxide barrier layer Positive photoresist
More informationCopyright 1997 by the Society of Photo-Optical Instrumentation Engineers.
Copyright 1997 by the Society of Photo-Optical Instrumentation Engineers. This paper was published in the proceedings of Microlithographic Techniques in IC Fabrication, SPIE Vol. 3183, pp. 14-27. It is
More informationCardinal Points of an Optical System--and Other Basic Facts
Cardinal Points of an Optical System--and Other Basic Facts The fundamental feature of any optical system is the aperture stop. Thus, the most fundamental optical system is the pinhole camera. The image
More informationPhotolithography. References: Introduction to Microlithography Thompson, Willson & Bowder, 1994
Photolithography References: Introduction to Microlithography Thompson, Willson & Bowder, 1994 Microlithography, Science and Technology Sheats & Smith, 1998 Any other Microlithography or Photolithography
More information16nm with 193nm Immersion Lithography and Double Exposure
16nm with 193nm Immersion Lithography and Double Exposure Valery Axelrad, Sequoia Design Systems, Inc. (United States) Michael C. Smayling, Tela Innovations, Inc. (United States) ABSTRACT Gridded Design
More informationModulation Transfer Function
Modulation Transfer Function The Modulation Transfer Function (MTF) is a useful tool in system evaluation. t describes if, and how well, different spatial frequencies are transferred from object to image.
More informationEffect of Reticle CD Uniformity on Wafer CD Uniformity in the Presence of Scattering Bar Optical Proximity Correction
Effect of Reticle CD Uniformity on Wafer CD Uniformity in the Presence of Scattering Bar Optical Proximity Correction Konstantinos Adam*, Robert Socha**, Mircea Dusa**, and Andrew Neureuther* *University
More informationCopyright 2000 by the Society of Photo-Optical Instrumentation Engineers.
Copyright by the Society of Photo-Optical Instrumentation Engineers. This paper was published in the proceedings of Optical Microlithography XIII, SPIE Vol. 4, pp. 658-664. It is made available as an electronic
More informationChapter 15 IC Photolithography
Chapter 15 IC Photolithography Advances in integrated circuit density are driven by the self-fulfilling prophecy known as Moore s law, which specifies that there is an exponential increase in circuit density
More informationResolution. T h e L i t h o g r a p h y E x p e r t (Winter 1997) Chris A. Mack, FINLE Technologies, Austin, Texas
T h e L i t h o g r a p h y E x p e r t (Winter 1997) Resolution Chris A. Mack, FINLE Technologies, Austin, Texas In past editions of this column (Spring and Summer, 1995), we defined quite carefully what
More information5. Lithography. 1. photolithography intro: overall, clean room 2. principle 3. tools 4. pattern transfer 5. resolution 6. next-gen
5. Lithography 1. photolithography intro: overall, clean room 2. principle 3. tools 4. pattern transfer 5. resolution 6. next-gen References: Semiconductor Devices: Physics and Technology. 2 nd Ed. SM
More informationFlare compensation in EUV lithography
Flare compensation in EUV lithography Place your image on top of this gray box. If no graphic is applicable, delete gray box and notch-out behind gray box, from the Title Master Jonathan Cobb, Ruiqi Tian,
More informationLecture 7. Lithography and Pattern Transfer. Reading: Chapter 7
Lecture 7 Lithography and Pattern Transfer Reading: Chapter 7 Used for Pattern transfer into oxides, metals, semiconductors. 3 types of Photoresists (PR): Lithography and Photoresists 1.) Positive: PR
More informationSynthesis of projection lithography for low k1 via interferometry
Synthesis of projection lithography for low k1 via interferometry Frank Cropanese *, Anatoly Bourov, Yongfa Fan, Andrew Estroff, Lena Zavyalova, Bruce W. Smith Center for Nanolithography Research, Rochester
More informationLecture 8. Lecture 8. r 1
Lecture 8 Achromat Design Design starts with desired Next choose your glass materials, i.e. Find P D P D, then get f D P D K K Choose radii (still some freedom left in choice of radii for minimization
More informationProperties of optical instruments. Visual optical systems part 2: focal visual instruments (microscope type)
Properties of optical instruments Visual optical systems part 2: focal visual instruments (microscope type) Examples of focal visual instruments magnifying glass Eyepieces Measuring microscopes from the
More informationChapter 34 The Wave Nature of Light; Interference. Copyright 2009 Pearson Education, Inc.
Chapter 34 The Wave Nature of Light; Interference 34-7 Luminous Intensity The intensity of light as perceived depends not only on the actual intensity but also on the sensitivity of the eye at different
More informationhttp://goldberg.lbl.gov 1 To EUV or not to EUV? That is the question. Do we need EUV interferometry and EUV optical testing? 17 Things you need to know about perfecting EUV optics. 2 The main things you
More informationFeature-level Compensation & Control
Feature-level Compensation & Control 2 Lithography Andy Neureuther and Costas Spanos, UCB Workshop 11/19/2003 11/19/2003 - Lithography 3 Lithography: Andy Neureuther, UCB Research Themes: Blowing the horn
More informationSimulation of coherent multiple imaging by means of pupil-plane filtering in optical microlithography
Erdélyi et al. Vol. 16, No. 8/August 1999/J. Opt. Soc. Am. A 1909 Simulation of coherent multiple imaging by means of pupil-plane filtering in optical microlithography M. Erdélyi and Zs. Bor Department
More informationTest procedures Page: 1 of 5
Test procedures Page: 1 of 5 1 Scope This part of document establishes uniform requirements for measuring the numerical aperture of optical fibre, thereby assisting in the inspection of fibres and cables
More informationFiber Optic Communications
Fiber Optic Communications ( Chapter 2: Optics Review ) presented by Prof. Kwang-Chun Ho 1 Section 2.4: Numerical Aperture Consider an optical receiver: where the diameter of photodetector surface area
More informationOptical System Design
Phys 531 Lecture 12 14 October 2004 Optical System Design Last time: Surveyed examples of optical systems Today, discuss system design Lens design = course of its own (not taught by me!) Try to give some
More informationMutually Optimizing Resolution Enhancement Techniques: Illumination, APSM, Assist Feature OPC, and Gray Bars
Mutually Optimizing Resolution Enhancement Techniques: Illumination, APSM, Assist Feature OPC, and Gray Bars Bruce W. Smith Rochester Institute of Technology, Microelectronic Engineering Department, 82
More informationCriteria for Optical Systems: Optical Path Difference How do we determine the quality of a lens system? Several criteria used in optical design
Criteria for Optical Systems: Optical Path Difference How do we determine the quality of a lens system? Several criteria used in optical design Computer Aided Design Several CAD tools use Ray Tracing (see
More informationOptical design of a high resolution vision lens
Optical design of a high resolution vision lens Paul Claassen, optical designer, paul.claassen@sioux.eu Marnix Tas, optical specialist, marnix.tas@sioux.eu Prof L.Beckmann, l.beckmann@hccnet.nl Summary:
More informationAstronomical Observing Techniques Lecture 6: Op:cs
Astronomical Observing Techniques Lecture 6: Op:cs Christoph U. Keller keller@strw.leidenuniv.nl Outline 1. Geometrical Op
More informationA Pin-Hole Projection System: Status
Spot-o-Matic A Pin-Hole Projection System: Status Wolfgang Lorenzon Work performed by: Michael Borysow Nate Barron SNAP Detector Design We need to test: Intra-pixel response Lateral Charge Diffusion Must
More informationSingle, Double And N-Slit Diffraction. B.Tech I
Single, Double And N-Slit Diffraction B.Tech I Diffraction by a Single Slit or Disk If light is a wave, it will diffract around a single slit or obstacle. Diffraction by a Single Slit or Disk The resulting
More informationLecture 4: Geometrical Optics 2. Optical Systems. Images and Pupils. Rays. Wavefronts. Aberrations. Outline
Lecture 4: Geometrical Optics 2 Outline 1 Optical Systems 2 Images and Pupils 3 Rays 4 Wavefronts 5 Aberrations Christoph U. Keller, Leiden University, keller@strw.leidenuniv.nl Lecture 4: Geometrical
More informationEE143 Fall 2016 Microfabrication Technologies. Lecture 3: Lithography Reading: Jaeger, Chap. 2
EE143 Fall 2016 Microfabrication Technologies Lecture 3: Lithography Reading: Jaeger, Chap. 2 Prof. Ming C. Wu wu@eecs.berkeley.edu 511 Sutardja Dai Hall (SDH) 1-1 The lithographic process 1-2 1 Photolithographic
More informationOptical Design with Zemax
Optical Design with Zemax Lecture : Correction II 3--9 Herbert Gross Summer term www.iap.uni-jena.de Correction II Preliminary time schedule 6.. Introduction Introduction, Zemax interface, menues, file
More informationCopyright 2004 by the Society of Photo-Optical Instrumentation Engineers.
Copyright 2004 by the Society of Photo-Optical Instrumentation Engineers. This paper was published in the proceedings of Emerging Lithographic Technologies VIII, SPIE Vol. 5374, pp. 1-8. It is made available
More informationOptical Microlithography XXVIII
PROCEEDINGS OF SPIE Optical Microlithography XXVIII Kafai Lai Andreas Erdmann Editors 24-26 February 2015 San Jose, California, United States Sponsored by SPIE Cosponsored by Cymer, an ASML company (United
More informationPoint Spread Function. Confocal Laser Scanning Microscopy. Confocal Aperture. Optical aberrations. Alternative Scanning Microscopy
Bi177 Lecture 5 Adding the Third Dimension Wide-field Imaging Point Spread Function Deconvolution Confocal Laser Scanning Microscopy Confocal Aperture Optical aberrations Alternative Scanning Microscopy
More informationLecture 2: Geometrical Optics. Geometrical Approximation. Lenses. Mirrors. Optical Systems. Images and Pupils. Aberrations.
Lecture 2: Geometrical Optics Outline 1 Geometrical Approximation 2 Lenses 3 Mirrors 4 Optical Systems 5 Images and Pupils 6 Aberrations Christoph U. Keller, Leiden Observatory, keller@strw.leidenuniv.nl
More informationCopyright 2000, Society of Photo-Optical Instrumentation Engineers This paper was published in Optical Microlithography XIII, Volume 4000 and is made
Copyright 00, Society of Photo-Optical Instrumentation Engineers This paper was published in Optical Microlithography XIII, Volume 4000 and is made available as an electronic reprint with permission of
More informationoptical and photoresist effects
Focus effects in submicron optical lithography, optical and photoresist effects Chris A. Mack and Patricia M. Kaufman Department of Defense Fort Meade, Maryland 20755 Abstract This paper gives a review
More informationWhy is There a Black Dot when Defocus = 1λ?
Why is There a Black Dot when Defocus = 1λ? W = W 020 = a 020 ρ 2 When a 020 = 1λ Sag of the wavefront at full aperture (ρ = 1) = 1λ Sag of the wavefront at ρ = 0.707 = 0.5λ Area of the pupil from ρ =
More informationTSBB09 Image Sensors 2018-HT2. Image Formation Part 1
TSBB09 Image Sensors 2018-HT2 Image Formation Part 1 Basic physics Electromagnetic radiation consists of electromagnetic waves With energy That propagate through space The waves consist of transversal
More informationimmersion optics Immersion Lithography with ASML HydroLith TWINSCAN System Modifications for Immersion Lithography by Bob Streefkerk
immersion optics Immersion Lithography with ASML HydroLith by Bob Streefkerk For more than 25 years, many in the semiconductor industry have predicted the end of optical lithography. Recent developments,
More informationOptical Proximity Effects, part 3
T h e L i t h o g r a p h y E x p e r t (Autumn 1996) Optical Proximity Effects, part 3 Chris A. Mack, FINLE Technologies, Austin, Texas In the last two editions of the Lithography Expert, we examined
More informationBe aware that there is no universal notation for the various quantities.
Fourier Optics v2.4 Ray tracing is limited in its ability to describe optics because it ignores the wave properties of light. Diffraction is needed to explain image spatial resolution and contrast and
More informationLecture 2: Geometrical Optics. Geometrical Approximation. Lenses. Mirrors. Optical Systems. Images and Pupils. Aberrations.
Lecture 2: Geometrical Optics Outline 1 Geometrical Approximation 2 Lenses 3 Mirrors 4 Optical Systems 5 Images and Pupils 6 Aberrations Christoph U. Keller, Leiden Observatory, keller@strw.leidenuniv.nl
More informationA New Hybrid Diffractive Photo-mask Technology
University of Central Florida Electronic Theses and Dissertations Doctoral Dissertation (Open Access) A New Hybrid Diffractive Photo-mask Technology 2005 Jin Won Sung University of Central Florida Find
More informationMicro- and Nano-Technology... for Optics
Micro- and Nano-Technology...... for Optics 3.2 Lithography U.D. Zeitner Fraunhofer Institut für Angewandte Optik und Feinmechanik Jena Printing on Stones Map of Munich Stone Print Contact Printing light
More informationFDTD Analysis of Readout Characteristics in a near-field MAMMOS recording system. Matthew Manfredonia Paul Nutter & David Wright
FDTD Analysis of Readout Characteristics in a near-field MAMMOS recording system Matthew Manfredonia Paul Nutter & David Wright Electronic & Information Storage Systems Research Group School of Computer
More informationRefractive Power of a Surface. Exposure Sources. Thin Lenses. Thick Lenses. High Pressure Hg Arc Lamp Spectrum
eractive Power o a Surace The reractive power P is measured in diopters when the radius is expressed in meters. n and n are the reractive indices o the two media. EE-57: icrofabrication n n P n n Exposure
More informationIntroduction to Light Microscopy. (Image: T. Wittman, Scripps)
Introduction to Light Microscopy (Image: T. Wittman, Scripps) The Light Microscope Four centuries of history Vibrant current development One of the most widely used research tools A. Khodjakov et al. Major
More informationTA/TI survey. Phy Phy
TA/TI survey https://webapps.pas.rochester.edu/secure/phpq/ Phy121 7 60 73 81 Phy123 1 6 11 18 Chapter 35 Diffraction and Polarization Double- Slit Experiment destructive interference Two sources of light
More informationUpdate on 193nm immersion exposure tool
Update on 193nm immersion exposure tool S. Owa, H. Nagasaka, Y. Ishii Nikon Corporation O. Hirakawa and T. Yamamoto Tokyo Electron Kyushu Ltd. January 28, 2004 Litho Forum 1 What is immersion lithography?
More informationImage Manipulation. Chris A. Mack Department of Defense Fort Meade, MD ABSTRACT
An Algorithm for Optimizing Stepper Performance Through Image Manipulation Chris A. Mack Department of Defense Fort Meade, MD 20755 ABSTRACT The advent offlexible steppers, allowing variation in the numericalaperture,
More informationTHE CHARACTERIZATION OF CHROMELESS PHASE SHIFT MASK TECHNIQUE FOR SUB-45NM LITHOGRAPHY TAN SOON YOENG
THE CHARACTERIZATION OF CHROMELESS PHASE SHIFT MASK TECHNIQUE FOR SUB-45NM LITHOGRAPHY TAN SOON YOENG NATIONAL UNIVERSITY OF SINGAPORE 2008 THE CHARACTERIZATION OF CHROMELESS PHASE SHIFT MASK TECHNIQUE
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY. 2.71/2.710 Optics Spring 14 Practice Problems Posted May 11, 2014
MASSACHUSETTS INSTITUTE OF TECHNOLOGY 2.71/2.710 Optics Spring 14 Practice Problems Posted May 11, 2014 1. (Pedrotti 13-21) A glass plate is sprayed with uniform opaque particles. When a distant point
More informationImmersion Lithography Micro-Objectives
Immersion Lithography Micro-Objectives James Webb and Louis Denes Corning Tropel Corporation, 60 O Connor Rd, Fairport, NY 14450 (U.S.A.) 585-388-3500, webbj@corning.com, denesl@corning.com ABSTRACT The
More informationInnovative Mask Aligner Lithography for MEMS and Packaging
Innovative Mask Aligner Lithography for MEMS and Packaging Dr. Reinhard Voelkel CEO SUSS MicroOptics SA September 9 th, 2010 1 SUSS Micro-Optics SUSS MicroOptics is a leading supplier for high-quality
More informationModulation Transfer Function
Modulation Transfer Function The resolution and performance of an optical microscope can be characterized by a quantity known as the modulation transfer function (MTF), which is a measurement of the microscope's
More informationLecture 8. Microlithography
Lecture 8 Microlithography Lithography Introduction Process Flow Wafer Exposure Systems Masks Resists State of the Art Lithography Next Generation Lithography (NGL) Recommended videos: http://www.youtube.com/user/asmlcompany#p/search/1/jh6urfqt_d4
More informationDiffraction. Interference with more than 2 beams. Diffraction gratings. Diffraction by an aperture. Diffraction of a laser beam
Diffraction Interference with more than 2 beams 3, 4, 5 beams Large number of beams Diffraction gratings Equation Uses Diffraction by an aperture Huygen s principle again, Fresnel zones, Arago s spot Qualitative
More informationLinewidth control by overexposure in laser lithography
Optica Applicata, Vol. XXXVIII, No. 2, 2008 Linewidth control by overexposure in laser lithography LIANG YIYONG*, YANG GUOGUANG State Key Laboratory of Modern Optical Instruments, Zhejiang University,
More informationTesting Aspheric Lenses: New Approaches
Nasrin Ghanbari OPTI 521 - Synopsis of a published Paper November 5, 2012 Testing Aspheric Lenses: New Approaches by W. Osten, B. D orband, E. Garbusi, Ch. Pruss, and L. Seifert Published in 2010 Introduction
More informationLecture 15: Fraunhofer diffraction by a circular aperture
Lecture 15: Fraunhofer diffraction by a circular aperture Lecture aims to explain: 1. Diffraction problem for a circular aperture 2. Diffraction pattern produced by a circular aperture, Airy rings 3. Importance
More informationMask Technology Development in Extreme-Ultraviolet Lithography
Mask Technology Development in Extreme-Ultraviolet Lithography Anthony Yen September 6, 2013 Projected End of Optical Lithography 2013 TSMC, Ltd 1976 1979 1982 1985 1988 1991 1994 1997 2000 2003 2007 2012
More informationApplied Optics. , Physics Department (Room #36-401) , ,
Applied Optics Professor, Physics Department (Room #36-401) 2290-0923, 019-539-0923, shsong@hanyang.ac.kr Office Hours Mondays 15:00-16:30, Wednesdays 15:00-16:30 TA (Ph.D. student, Room #36-415) 2290-0921,
More informationDepth of Focus and the Alternating Phase Shift Mask
T h e L i t h o g r a h y E x e r t (November 4) Deth of Focus and the Alternating Phase Shift Mask Chris A. Mack, KLA-Tencor, FINLE Division, Austin, Texas One of the biggest advantages of the use of
More informationMicroscopy: Fundamental Principles and Practical Approaches
Microscopy: Fundamental Principles and Practical Approaches Simon Atkinson Online Resource: http://micro.magnet.fsu.edu/primer/index.html Book: Murphy, D.B. Fundamentals of Light Microscopy and Electronic
More information