Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
|
|
- Vivien Francis
- 6 years ago
- Views:
Transcription
1 equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT 2003 Base, Copper Alloy, 3/8-16 Threaded I.D., Adhesive type, BS-C-1/2ID-ADH-AT 2005 Base, Copper Alloy, 1/2-13 Threaded I.D., Adhesive type, BS-C-5/8OD-ADH-AT 2007 Base, Copper Alloy, 5/8-11 Threaded O.D., Adhesive type, BS-C-5/8ID-ADH-AT New Base, Copper Alloy, 5/8-11 Threaded I.D., Adhesive type, BS-A-1/2ID-ADH-AT 2005A Base, Aluminum, 1/2-13 Threaded I.D., Adhesive type, BS-A-5/8ID-ADH-AT 2007A Base, Aluminum, 5/8-11 Threaded I.D., Adhesive type, BS-A-5/8OD-ADH-AT New Base, Aluminum, 5/8-11 Threaded O.D., Adhesive type, Universal Surface Bases Used for mounting on a flat surface or against the inside of vertical walls. Can be mounted with adhesive or fasteners. BS-C-3/8ID-F-AT 2013 Base, Copper Alloy, 3/8-16 Threaded I.D., Flat Surface, BS-C-1/2ID-F-AT 2015 Base, Copper Alloy, 1/2-13 Threaded I.D., Flat Surface, BS-A-1/2ID-F-AT 2015A Base, Aluminum, 1/2-13 Threaded I.D., Flat Surface, for 13.9 oz (394.1 g) 14.8 oz (419.6 g) 15.8 oz (447.9 g) 17 oz (481.9 g) 4.7 oz (133.2 g) 4.8 oz (136.1 g) 6 oz (170.1 g) 13.1 oz (371.4 g) 10.9 oz (309.0 g) 4.2 oz (119.1 g) Offset Parapet Bases Used for vertical mounting against the inside parapet wall. Base has a 1-1/2 offset to clear coping on parapet wall. BS-C-3/8ID-OS-AT 2033 Base, Copper Alloy, 3/8-16 Threaded I.D., Offset for Parapet, BS-C-1/2ID-OS-AT 2035 Base, Copper Alloy, 1/2-13 Threaded I.D., Offset for Parapet, BS-C-5/8ID-OS-AT 2037 Base, Copper Alloy, 5/8-11 Threaded I.D., Offset for Parapet, BS-A-1/2ID-OS-AT 2035A Base, Aluminum, 1/2-13 Threaded I.D., Offset for Parapet, BS-A-5/8ID-OS-AT 2037A Base, Aluminum, 5/8-11 Threaded I.D., Offset for Parapet, 13 oz (36.85 g) 12.8 oz (362.9 g) 13.1 oz (371.4 g) 4.3 oz (121.9 g) 4.1 oz (116.2 g)
2 3-6 equipment catalog Standard Ridge Bases Allows for easy fitting along a roof ridge. The standard base has a 5/8 O.D. thread for air terminal fastening and mechanical conductor connector. BS-C-5/8OD-12-RDG-AT 2100 Base, Copper Alloy, 5/8-11 Threaded O.D.,12, Ridge Type, BS-A-5/8OD-12-RDG-AT 2100A Base, Aluminum, 5/8-11 Threaded O.D.,12, Ridge Type, 11.7 oz (331.7 g) 5.9 oz ( g) Adjustable Ridge Bases A swivel neck allows mounting on any roof pitch while keeping the air terminal level. The base has a mechanical conductor connector. BS-C-3/8ID-5/8OD-RDG-AT 2126 Base, Copper Alloy, 3/8-16 Threaded I.D., 5/8 O.D., Ridge Type, BS-A-5/8OD-RDG-AT 2126A Base, Aluminum, 5/8-11 Threaded O.D., Ridge Type, Standing Seam Bases This cast base for standing seam roof has a 3/4 groove to fit over most seams. Provided with a swivel adaptor for leveling points. Cable holder is adjustable so cables can run parallel or perpendicular. Two set screws secure base to seam. BS-C-3/8ID-SSM-AT 2128 Base, Copper Alloy, 3/8-16 Threaded I.D., Standing Seam, BS-C-1/2ID-SSM-AT 2129 Base, Copper Alloy, 1/2-13 Threaded I.D., Standing Seam, BS-A-1/2ID-SSM-AT 2129A Base, Aluminum, 1/2-13 Threaded I.D., Standing Seam, Horizontal Bases Applicable where placing air terminals on grounded or pre-bonded horizontal metal surfaces. The base has an 8 sq. in. contact surface and four holes for fastening. BS-C-1/2ID-H-AT 2205 Base, Copper Alloy, 1/2-13 Threaded I.D., Horizontal, BS-C-5/8OD-H-AT 2206 Base, Copper Alloy, 5/8-11 Threaded O.D., Horizontal, fo BS-A-1/2ID-H-AT 2205A Base, Aluminum, 1/2-13 Threaded I.D., Horizontal, BS-A-5/8OD-H-AT 2206A Base, Aluminum, 5/8-11 Threaded O.D., Horizontal, 1.14 lbs (517.1 g) 6.5 oz (184.3 g) 1 lbs (453.6 g) 1.1 lbs (498.9 g) 9 oz (255.1 g) 7.3 oz (206.9 g) 8.1 oz (229.6 g) 2.3 oz (65.2 g) 2.3 oz (65.2 g)
3 equipment catalog 3-7 Vertical Bases Applicable where placing air terminals on grounded or pre-bonded vertical metal surfaces. The base has a 4 sq. in. contact surface and four holes for fastening. BS-C-1/2ID-V-AT 2215 Base, Copper Alloy, 1/2-13 Threaded I.D., Vertical, 5.1 oz (144.6 g) BS-A-1/2ID-V-AT 2215A Base, Aluminum, 1/2-13 Threaded I.D., Vertical, for 1.4 oz (39.7 g) Horizontal Pipe Bases May be used with or without conductor run. BS-C-3/8ID-1_3/4-HP-AT 2223 Base, Copper Alloy, 3/8-16 Threaded I.D., Min. 1 1/4 to Max.1 3/4, Horizontal Pipe, BS-C-1/2ID-1_3/4-HP-AT 2225 Base, Copper Alloy, 1/2-13 Threaded I.D., Min. 1 1/4 to Max.1 3/4, Horizontal Pipe, 1.19 lbs (539.8 g) BS-C-5/8OD-1_3/4-HP-AT 2227 Base, Copper Alloy, 5/8-11 Threaded O.D., Min. 1 1/4 to Max.1 3/4, Horizontal Pipe, BS-A-1/2ID-1_3/4-HP-AT 2225A Base, Aluminum, 1/2-13 Threaded I.D., Min. 1 1/4 to Max.1 3/4, Horizontal Pipe, 4.4 oz (124.7 g) BS-A-5/8OD-1_3/4-HP-AT 2227A Base, Aluminum, 5/8-11 Threaded O.D., Min. 1 1/4 to Max.1 3/4, Horizontal Pipe, 4.5 oz (127.6 g) Vertical Pipe Bases May be used with or without conductor run. BS-C-3/8ID-2_1/2-VP-AT 2223V Base, Copper Alloy, 3/8-16 Threaded I.D., Min. 1 3/4 to Max. 2 1/2, Vertical Pipe, BS-C-1/2ID-2_1/2-VP-AT 2225V Base, Copper Alloy, 1/2-13 Threaded I.D., Min. 1 3/4 to Max. 2 1/2, Vertical Pipe, BS-C-5/8OD-2_1/2-VP-AT 2227V Base, Copper Alloy, 5/8-11 Threaded O.D., Min. 1 3/4 to Max. 2 1/2, Vertical Pipe, BS-A-1/2ID-2_1/2-VP-AT 2225AV Base, Aluminum, 1/2-13 Threaded I.D., Min. 1 3/4 to Max. 2 1/2, Vertical Pipe, BS-A-5/8OD-2_1/2-VP-AT 2227AV Base, Aluminum, 5/8-11 Threaded O.D., Min. 1 3/4 to Max. 2 1/2, Vertical Pipe, Vertical Bases Base has a mechanical conductor connector that allows both vertical and horizontal cable runs. BS-C-3/8ID-V-AT 2303 Base, Copper Alloy, 3/8-16 Threaded I.D., Vertical, 7.8 oz (221.1 g) BS-C-1/2ID-V-AT 2305 Base, Copper Alloy, 1/2-13 Threaded I.D., Vertical, 7.2 oz (204.1 g) BS-A-1/2ID-V-AT 2305A Base, Aluminum, 1/2-13 Threaded I.D., Vertical, for 2.6 oz (73.7 g) 1.19 lbs (539.8 g) 4.4 oz (124.7 g) 4.5 oz (127.6 g)
4 3-8 equipment catalog Heavy Duty Terminal Bases A heavy duty base for vertical mounting with multiple applications. The straight base has two stainless steel set screws for clamping conductor concentric to the air terminal. BS-C-3/8ID-STR-HD-AT 2313 Base, Copper Alloy, 3/8-16 Threaded I.D., Straight, Heavy Duty, BS-C-1/2ID-STR-HD-AT 2315 Base, Copper Alloy, 1/2-13 Threaded I.D., Straight, Heavy Duty, BS-A-1/2ID-STR-HD-AT 2315A Base, Aluminum, 1/2-13 Threaded I.D., Straight, Heavy Duty, 10.2 oz (289.2 g) 9.1 oz (257.9 g) 3.2 oz (90.7 g) Adaptors Adjustable Adaptors The adjustable air terminal adaptor adjusts in a 180 degree range. Also available in tin plated. AD-C-3/8ID-3/8ID-SWV-ADJ-AT 2401 Adaptor, Copper Alloy, 3/8-16 I.D.,3/8-16 Threaded I.D., Swivel, Adjustable, AD-C-1/2ID-1/2OD-SWV-ADJ-AT 2402 Adaptor, Copper Alloy, 1/2-13 I.D.,1/2-13 Threaded O.D., Swivel, Adjustable, AD-C-1/2ID-1/2ID-SWV-ADJ-AT 2403 Adaptor, Copper Alloy, 1/2-13 I.D.,1/2-13 Threaded I.D., Swivel, Adjustable, AD-C-3/8ID-5/8OD-SWV-ADJ-AT 2404 Adaptor, Copper Alloy, 3/8-16 I.D.,5/8-11 Threaded O.D., Swivel, Adjustable, AD-C-1/2ID-5/8OD-SWV-ADJ-AT 2405 Adaptor, Copper Alloy, 1/2-13 I.D.,5/8-11 Threaded O.D., Swivel, Adjustable, AD-C-5/8ID-5/8OD-SWV-ADJ-AT 2406 Adaptor, Copper Alloy, 5/8-11 I.D.,5/8-11 Threaded O.D., Swivel, Adjustable, AD-C-3/8ID-5/8ID-SWV-ADJ-AT 2407 Adaptor, Copper Alloy, 3/8-16 I.D.,5/8-11 Threaded I.D., Swivel, Adjustable, AD-C-1/2ID-5/8ID-SWV-ADJ-AT 2408 Adaptor, Copper Alloy, 1/2-13 I.D.,5/8-11 Threaded I.D., Swivel, Adjustable, AD-A-1/2ID-1/2OD-SWV-ADJ-AT 2402A Adaptor, Aluminum, 1/2-13 I.D.,1/2-13 Threaded O.D., Swivel, Adjustable, AD-A-1/2ID-1/2ID-SWV-ADJ-AT 2403A Adaptor, Aluminum, 1/2-13 I.D.,1/2-13 Threaded I.D., Swivel, Adjustable, AD-A-1/2ID-5/8OD-SWV-ADJ-AT 2405A Adaptor, Aluminum, 1/2-13 I.D.,5/8-11 Threaded O.D., Swivel, Adjustable, AD-A-5/8ID-5/8OD-SWV-ADJ-AT 2406A Adaptor, Aluminum, 5/8-11 I.D.,5/8-11 Threaded O.D., Swivel, Adjustable, AD-A-1/2ID-5/8ID-SWV-ADJ-AT 2407A Adaptor, Aluminum, 1/2-13 I.D.,5/8-11 Threaded I.D., Swivel, Adjustable, 5.1 oz (144.6 g) 5.8 oz (164.0 g) 5.6 oz (158.8 g) 5.2 oz (147.4 g) 5.3 oz (150.3 g) 5.3 oz g) 5.3 oz (150.3 g) 5.2 oz (147.4 g) 2.4 oz 2.6 oz (73.7 g) 3.1 oz (87.9 g) 1.9 oz (53.9 g) 1.9 oz (53.9 g) NOTE Please contact your representative for orders requiring different configurations and sizes.
5 equipment catalog 3-9 Adaptors AD-C-3/8ID-3/8ID 2411 Adaptor, Copper Alloy, 3/8-16 I.D., 3/8-16 Threaded I.D. 2.4 oz AD-C-3/8ID-1/2ID 2412 Adaptor, Copper Alloy, 3/8-16 I.D., 1/2-13 Threaded I.D. 2.0 oz (62.0 g) AD-C-3/8ID-5/8ID 2413 Adaptor, Copper Alloy, 3/8-16 I.D., 5/8-11 Threaded I.D. 2.3 oz AD-C-1/2ID-1/2ID 2414 Adaptor, Copper Alloy, 1/2-13 I.D., 1/2-13 Threaded I.D. 2.4 oz AD-C-1/2ID-5/8ID 2415 Adaptor, Copper Alloy, 1/2-13 I.D., 5/8-11 Threaded I.D. 2.2 oz (62.4 g) AD-C-5/8ID-5/8ID 2416 Adaptor, Copper Alloy, 5/8-11 I.D., 5/8-11 Threaded I.D. 1.4 oz (39.7 g) AD-A-1/2ID-1/2ID 2414A Adaptor, Aluminum, 1/2-13 I.D., 1/2-13 Threaded I.D. 2.2 oz (62.4 g) AD-A-1/2ID-5/8ID 2415A Adaptor, Aluminum, 1/2-13 I.D., 5/8-11 Threaded I.D. 1.0 oz AD-A-5/8ID-5/8ID 2416A Adaptor, Aluminum, 5/8-11 I.D., 5/8-11 Threaded I.D. 1.0 oz Concealed Adaptors AD-C-5/8OD-3/8IDT-3/8IDB 2423 Adaptor, Copper Alloy, 5/8-11 O.D., 3/8 I.D. Top, 2.5 oz 3/8-16 Threaded I.D. Bottom (70.9 g) AD-C-5/8ODT-1/2IDB 2425 Adaptor, Copper Alloy, 5/8-11 O.D. Top, 1/2-13 Threaded I.D. Bottom 2.2 oz (62.0 g) AD-A-5/8ODT-1/2IDB 2425A Adaptor, Aluminum, 5/8-11 O.D. Top, 1/2-13 Threaded I.D. Bottom 1.0 oz
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationUNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
More informationMETRIC LIGHTNING PROTECTION PRODUCTS
Section 11 Metric Description... Page # 11.1 Taper Pointed Air Rods, Air Terminals & Attachments...270 11.2 Saddles & Attachments...271-272 11.3 s...273-275 11.4 Attachments...276-279 11.5 Clamps...280
More informationGROUNDING EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA
PAGE 86 5000 500 5040 5060 5080 500 50 540 560 580 500 540 560 580 5300 5340 5360 5380 5400 5440 5460 5480 5500 5540 5560 700 705 75 70 75 730 740 745 750 755 765 770 775 780 790 7300 7305 730 C 00 C 0
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationLightning Protection Equipment
LINE CARD Grounding Exothermic Lightning Protection Lightning Protection Equipment Manufacturing Engineering Services Training Typical Roof Lightning Protection Layout MOUNTED VERTICALLY (WITH FASTENERS
More informationLightning Protection Equipment Catalog
Catalog Number: 211 REVISED and RE-ISSUED 7-1-2013 Please see the following page for important notes. Lightning Protection Equipment Catalog Equipment Engineered for Today s Structures Commercial - Industrial
More informationLightning Protection Materials
Lightning Protection Materials LIGTNING PROTECTION MATERIAL INSTALLATION SYSTEM KEY 1. Roof Conductors 2. Aluminium Ropray Conductor(B.C) 3. PVC Covered Conductor 4. Soild Circular Conductor 5. Copper
More information60/100 Concentric Flue System Parts
60/00 Concentric Flue System Parts MG88(MG85 m extended option) Std Concentric Flue 60/00 (Avanta Plus). Low profile bend (Avanta Plus). Telescopic terminal. Wall plates - ( x white) MG80 Vertical Terminal
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationSECTION - 3 EARTHING CLAMPS & FITTINGS
SECTION - 3 EARTHING CLAMPS & FITTINGS 78 EARTHING CONDUCTOR TO FLAT SURFACE TYPE ESS - SINGLE CONDUCTOR TYPE EST - TWIN CONDUCTOR Types ESS (single conductor) and EST (twin conductor) clamps are designed
More informationeco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationNEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit
For Flexible Metal Conduit SC: Straight Squeeze Type Connector These squeeze type connectors are used to terminate flexible metal conduit to a 1/2 knockout in a dry location box or enclosure. 1/2" and
More informationSTOPS. TRIMCO# 1207 B 2-1/4 P 3-3/4 EYE 7/8 x 2-1/4 HOOK 2-3/4 BHMA L01351
STOPS TRIMCO# 1201 1201-5 1201CK B 2-1/4 3 2-3/4 H 3 5 3 BHMA L02131 L02131 L02131, SS Floor Stop - Cast 1201CK is a heavy duty, high-abuse school design with reduces tampering and loss of rubber bumper.
More informationFRONT AND REAR HOOD ASSEMBLY (GRAIN CART) REF PART# DESCRIPTION QTY RETAIL
FRONT AND REAR HOOD ASSEMBLY (GRAIN CART) 1 0001-014311 GRAIN CART STEEL FRONT HOOD 1 1A 0001-014313 GRAIN CART 5" OFFSET STEEL FRONT HOOD 1 2 0001-014312 GRAIN CART STEEL REAR HOOD 1 N/A 0001-014901 GRAIN
More informationJ D SQUARED INC. NOTCH MASTER Tube and Pipe Notcher Operating Instructions
Copyright (c) 2006 J D SQUARED INC. www.jd2.com NOTCH MASTER Tube and Pipe Notcher Operating Instructions Angled Notches PATENT PENDING Straight Notches Offset Notches Tube Clamp Slider Tube Clamp Exploded
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationEarth Clamp / Ground Clamp Earth rod Clamp / Earthing rod Clamp Ground Clamp / Grounding Clamp
Earth Clamp / Ground Clamp Earth rod Clamp / Earthing rod Clamp Ground Clamp / Grounding Clamp Copper alloy clamps are made from Bronze / Gunmetal / High Strength Copper Alloy body which give strong resistance
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationIndustrial Strength Adhesive Works in all Climates
2011-MNI Industrial Strength Adhesive Works in all Climates Butyl Magic - A NEW Alternative to EternaBond EternaBond is a product of Adco Global Our Product Butyl Magic is a self-adhesive sealing tape
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationSECTION ROOF ACCESSORIES. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 07720 ROOF ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Attachment clamp system for standing seam metal roofs. B. Attachment
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
More informationSIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationSIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationMI: (Secure this number someplace, for possible future need) SPECIFICATIONS:
6C ASSEMBLY INSTRUCTIONS ANTENNA MODEL T6 MI: 030927 (Secure this number someplace, for possible future need) SPECIFICATIONS: FORWARD GAIN 5.1 dbd F:B RATIO 15-25 db (Rises with frequency) FREQUENCY COVERAGE
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationWaterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationInstallation Instructions Student 101 Fume Cupboard
Installation Instructions Student 101 Fume Cupboard Refer drawing on next page 0. If your fume cupboard is supplied with a flatpack bench frame, see step1. If your fume cupboard will be mounted on an existing
More informationConstruction details: Master-C type profiles and joints:
Construction details: Master-C type profiles and joints: Master-C 3g 32 mm. (1 1/4 ) 1000 mm. (39 3/8 ) outer face inner face 10.5 fixing details: sealing washers shall be installed through a 2-3/8 x 1-9/16
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationThermostat Conversion Kit Data Sheet CHOICE OF INSTALLATION
22-022 Thermostat Conversion Kit Data Sheet The Thermostat Conversion Kit was designed and packaged with the serviceman in mind. It allows a quick and easy replacement of competitive devices with a new
More information800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door.
800 SERIES Heavy-Duty Commercial Grade 1 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationCall Today Ship Today!
JUST LIKE HAVING IT ON THE SHELF MOLDS WELD METAL ACCESSORIES M-100 M-101 M-102 M-10 M-106 M-112 M-12 M-151 M-15 M-156 M-159 M-161 SAME DAY SERVICE ( Market) 15CP 25CP 25CI 32CI 5CI Mini- Clamp Flint Ignitors
More informationDescription 1/8" 1/4" & 3/8" 1/2" & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" lb
Precision Die Heads For SUPERTRONIC 1250, 2000 and SUPER CUT models. Feature enlarged shaving discharge chambers for faster threading, strengthened locking plate and precise die seating. Precision Threading
More informationBLACK WIDOW COMPOSITE
PAGE-1 UPDATED 3-6-2015 REV.1 BLACK WIDOW COMPOSITE Detailed installation manual PAGE-2 UPDATED 3-6-2015 SpiderRax, Inc. REVISION PAGE Installation Manual For BWC-S, BWC-B,BWC-F DATE PAGES REASON OLD LEVEL
More informationUHF 477MHZ CB 27MHZ ANTENNA NAME ADVENTURER FLEXI-DIPOLE FLEXI-DIPOLE UHF STUMPY 4WHEELER EXPLORER REDBACK HI-GLASS XTENDER RUGGED HI-STEEL
Benelec-1 27MHZ UHF 477MHZ CB 31CM 33CM 50CM 65CM 67CM 92CM 87CM 93CM 85CM 150CM 130CM 120CM PART NUMBER(S) ANTENNA NAME 02152 REDBACK 02623 HI-GLASS 02623I (STEEL) 02623IBK (BLACK) HI-STEEL 026264 FAZE
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationRPI ROYAL EDGE EPDM MATERIAL GLOSSARY & GUIDE
RPI ROYAL EDGE EPDM MATERIAL GLOSSARY & GUIDE WHITE EPDM MEMBRANE TPO MEMBRANE WHITE EPDM MEMBRANE TPO MEMBRANE Multi-System Products: W TPO Cured field membrane used for waterproofing sidewalls, flat
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationInstallation Guide. Tel: (519) Railway St. P.O Box 668 Seaforth, ON Canada N0K 1W0
Installation Guide Tel: (519) 527-2470 92 Railway St. P.O Box 668 Seaforth, ON Canada N0K 1W0 www.sunnorth.com Table of Contents...1 I. Table of Contents... 2 II. Installation Preparation... 2 Items Included...
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More information99 Straight Sections 100 fittings, splices & connectors. 103 fasteners
99 Straight Sections 100 fittings, splices & connectors 102 accessories 103 Cable unway is available in two styles, tubular side rails that are lightweight yet strong and solid-bar side rails that offer
More informationTRANSMITTAL LETTER. As Builts Change Order Contract Copy of Letter Insurance. For approval Approved as submitted Resubmit copies for approval
Redwood City Electric, Inc. TRANSMITTAL LETTER To: Transworld Construction, Inc. 1178 Folsom Street San Francisco, CA 94103 Date: 05/31/12 Job #: 9340 Regarding: SFO DATA CENTER Attn: Rob Acero We are
More informationSystem Lightning Protection Products
System 2000 Lightning Protection Products ERICO Facility Electrical Protection The Company ERICO was formed in 1903 as the Electric Railway Improvement Company. In 1938 ERICO developed the CADWELD exothermic
More informationPortable Dipole Shortwave Antenna (PDSA-7)
PACKING LIST 1 Connection base 1 (Material: Nylon) 2 Multiband loading coil 2 (40m-10m, material: Nylon) 3 Aluminum oxide tube 4 (19 X 280mm) 4 Extractable antenna (on the top) 2 (Each fully extracted
More informationTechline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationMECHANICAL BACK FASTENED SYSTEMS INSTALLATION DATA
MECHANICAL BACK FASTENED SYSTEMS INSTALLATION DATA 7/16 PETRARCH ARCHITECTURAL WALL PANELS APPLIED OVER A STUDWALL BY MEANS OF A FIELD ASSEMBLED BACK FASTENED SYSTEM DESIGN CONCEPT 7/16 panels may be installed
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationDependable and tough, the Saddle Machine was specifically SADDLE MACHINES. Saddle Machines Include:
SADDLE MACHINES Just a brief note to say I am very pleased with my Mathey Short Saddle Machine... it is as old or older than I am and it has had new parts and pieces... but it still performs very well
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationOHearneAssociates.com
OHearne Associates: Architecture - Site - Planning P. O. Box 598, Harrisville, RI 02830 401-710-7788 Fax: 710-7848 OHearneAssociates.com www.youtube.com/user/johearne North Smithfield Town Hall 1 Main
More informationCable Display Systems
Cable Display Systems Catalogue Cable Display / Rod Display / Standoff Display 1.5mm (1/16") cable - fixing kits Floor to Ceiling Fixing Kit CK-1500 18.5mm (3/4") dia. top fi xing Floor fixing with adjustable
More informationHollow Stem Auger Modifications
Hollow Stem Auger Modifications Auger Extensions Auger Extensions are used to compensate for the distance from the ground up to the rig. To order these extensions please specify: 1. Length: standards are
More informationBUY A COMPLETE MOLD CLAMP ASSEMBLY OR INDIVIDUAL PARTS
Machined Mold s FEATURES: Our complete line of mold clamps are available in an extensive range of sizes. s are available in open-toe and closed-toe styles, as well as heavy duty and extra heavy duty versions.
More informationM2 Antenna Systems, Inc. Model No: YAGI ANTENNA
M Antenna Systems, Inc. Model No: 4.5-7 YAGI ANTENNA SPECIFICATIONS: Model... 4.5-7 Frequency Range... 4.0 To 4.5 MHz *Gain... 0 To 7 dbi Front to back... 0 db over the rear 80 Beamwidth... E=44 H=50 typical
More informationEvorail Guardrail has Evolved
Evorail Guardrail has Evolved Introduction o About Evorail o Legislation & Hierarchy of Fall Protection o Evorail The Systems Evorail Standard Evorail Radius Evorail Collapsible Evorail Top Fixed Evorail
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More information, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
More informationSECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
More informationW & A PARTS MANUAL STACKER BUSTER LEVEL BANDER. Model No Quality Products from W & A MANUFACTURING COMPANY
W & A PARTS MANUAL 12 ROW @ 38 STACKER BUSTER LEVEL BANDER Model No. 3668 SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff, Arkansas 71611 Phone: (870)
More informationProtech GM Accessories
Protech GM Accessories GROUND GAS PROTECTION Group Ground Gas Protection INTRODUCTION Both the British Standard BS8485:2015 and the CIRIA C735 guidance document emphasise the importance of on site verification
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationM-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #
M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,
More informationRIDGE MAST MOUNT (RMM)
May 5, 009 Revision E ASSEMBLY MANUAL (RMM) General Dynamics Satcom Technologies 1500 PRODELIN DRIVE NEWTON NC 8658 88-464-4141 www.gdsatcom.com 1.0 INTRODUCTION: 1.1 Features: The Ridge Mast Mount (RMM)
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationMODULAR HIGH TUNNEL INSTALLATION GUIDE
9615 Grandview Rd. Kansas City, MO 64137 Version: 15 JAN -2015 Sustainable Agriculture Solutions MODULAR HIGH TUNNEL INSTALLATION GUIDE (816) 444-7330 SmallFarmTools.com Thank you for purchasing a Modular
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationSutton Screened in Awning / Porch
Sutton Screened in Awning / Porch Sections: Project Overview Roof Work Cedar Framing Canopy Frame Screen Frames Misc. Sheet 1 - - - Index Sheet 2 - - - Project Summary Sheet 3 - - - Roof Work overview
More informationMULE-HIDE PRODUCTS CO., INC FASTENER GUIDELINES
FASTENER GUIDELINES Fastener Overview A. Mule-Hide offers a variety of fasteners and plates to: Attach roof insulation Attach mechanically fastened roofing membranes Secure All Purpose Bar and termination
More informationSPLIT FRAME CUTTING & BEVELING MACHINES
SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More information