Portable Hacksaws for Tough Duty

Size: px
Start display at page:

Download "Portable Hacksaws for Tough Duty"

Transcription

1 Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of pipe, structural steel, tanks and other materials. Our saws are designed for the toughest service in refineries, power plants, utilities, offshore oil, construction and demolition applications and are ideal for shutdowns and turnarounds in process piping industries. CS Unitec's pneumatic saws are safer than cutting with a welding torch in hazardous areas or confined spaces. Compact size, ideal for cutting in confined spaces blade stroke Pipe clamps for 90 cutting of up to 30" OD pipe Profile clamps for structural steel Wide variety of blades and accessories for cutting steel, stainless steel, aluminum, plastic and wood Optional blade guide to ensure right-angle cuts Automatically cut pipe with our optional self-feeding, pneumatic-powered pipe clamp system Assorted pipe clamps for pipes up to 30" OD or profile clamps for structural steel (see pages 17-18) Manual or automatic feed Heavy-duty saw blades from to 37" long HSS, HSS-SL, and carbidecoated blades available (see page 19) Twist or lever throttle Pneumatic, electric or hydraulic motor Pneumatic: 3/4" NPT Connection Electric: 110 Volt (220V available) Hydraulic: 1/2" FF (HTMA) Couplings Optional saw blade guide for added blade stability ensures straight cutting! Two sizes available (Not required see page 18)

2 Portable Pneumatic Power Hacksaws Pneumatic power for hazardous environments Model with lever throttle Pneumatic Throttle Types for Pneumatic Saws: 3/4" NPT Air Connection ATEX Certified for Ex Zone EX II 2 GcT5 ATEX Certified Roll Throttle (air model only) used only with automatic feed pipe clamp (see page 18) Lever Throttle (model ) provides on/off paddle switch for manual cutting with clamp Pneumatic motor with variable speeds Ideal for cutting pipe, tanks, structural steel, profiles and other materials Designed for the toughest service in refineries, chemical plants, utilities, pipelines, construction, offshore oil and demolition applications Cut pipe up to 30" OD in one pass Chain clamps and profile clamps available for accurate 90 cutting of pipe and structural steel Pipe Capacity 30" OD Profile Capacity 21 3 /4" h x 11 1 /2" w stroke for heavy-duty cutting Ideal for cutting in confined spaces Accommodate heavy-duty blades up to 37" long Optional saw blade guides to increase blade stability (see page 18) Pneumatic pipe clamp system available for automatically cutting pipe; easily attaches to pneumatic hacksaw and shares same air supply (see accessory No on page 18) Clamps Manual Automatic Accessory Saw Blades (see page 19) HSS (High-speed ), HSS-SL (for stainless steel and hard metal) and Carbide Coated Clamps for Pipes and Profiles manual and automatic-feed clamps for straight, 90 cutting of pipes and profiles (see pages 17-18) Carrying Case for Pneumatic Hacksaws Optional metal carrying case for and order accessory No Model No. Power Throttle Motor Specifications Strokes per Min. Blade Stroke Hose Weight (lbs.) Pneumatic - 3/4" ID NPT Air Connection * 1.5 HP Roll Air Consumption: 51 CFM /2" ID * 1.5 HP Lever Air Pressure: 90 PSI /2" ID 15.4 * Carrying case not included with air models for optional carrying case, order accessory No

3 Portable Power Hacksaws Electric and hydraulic power Model with variable speed Electric 11 Amps / 110 Volt (220 Volt Available) Model with lever throttle Hydraulic 1/2" FF Couplings Electric or hydraulic motor with variable speeds Ideal for cutting pipe, tanks, structural steel, profiles and other materials Designed for the toughest service in refineries, chemical plants, utilities, pipelines, construction, offshore oil and demolition applications Cut pipe up to 30" OD in one pass Pipe Capacity 30" OD Profile Capacity 21 3 /4" h x 11 1 /2" w Chain clamps and profile clamps available for accurate 90 cutting of pipe and structural steel stroke for heavy-duty cutting Ideal for cutting in confined spaces Accommodate heavy-duty blades up to 37" long Optional saw blade guides to increase blade stability (see page 18) Automatic-feed pipe clamp system available for automatically cutting pipe saves operator time and makes work easier (see accessory Part No on page 18) Clamps Accessory Saw Blades (see page 19) Manual Automatic HSS (High-speed ), HSS-SL (for stainless steel and hard metal) and Carbide Coated Clamps for Pipes and Profiles manual and automatic-feed clamps for straight, 90 cutting of pipes and profiles (see pages 17-18) Model No. Power Throttle Motor Specifications Strokes per Min. Blade Stroke Hose Weight (lbs.) Electric - 11 Amps / 110 Volt** * 1.5 HP Trigger 110V/60 Hz (220V/50Hz is available) Cable 13 Hydraulic - 1/2" FF (HTMA) Couplings HP Lever Oil Flow: 4 GPM at 2000 PSI /2" ID 13.5 * Model has an electronic speed control dial. **Also available as 220 Volt/50 Hz

4 Hacksaw Accessories Heavy-duty cutting of pipe and structural steel Clamps for Pipes and Profi les Ensure 90 cuts through pipe and profiles Large Pipe Clamp, Model Small Pipe Clamp, Model Up to 6" pipe dia. Model No " to 3 /4" OD pipe clamp manual tightening of chain* Model No " to 3 /4" OD pipe clamp lever lock provides no-tools tightening of chain* * up to OD with one extension chain; up to 30" with two extension chains see Part No shown below Model No " to 6" OD pipe clamp Model No / x 11 3 / profi le clamp Lever Lock Assembly Part No Can be used to retrofit manual clamp for no-tools tightening of chain. Also fits similar clamps. Profi le Clamp, Model Extension Chains for Pipe Clamps Extend capacity of pipe clamps up to OD Model No /4" chain extension Model No / chain extension (two of these chains allows pipe clamp Nos , , and to fi t 30" OD pipe) ProLube Lubricants ideal for cutting steel, stainless steel and hard metals Cutting tools work cooler, longer and more efficiently with ProLube Lubricants from CS Unitec. Improve cutting tool output and performance Prolong tool life by reducing friction and wear Unique composition provides excellent adhesion to cutting tools for maximum lubrication Corrosion inhibitor Ideal for saw blades and drill bits Non-toxic ProLube Solid CS oz. push tube CS oz. push tube High film strength stays on for the cut! ProLube Liquid Water soluble :1 CS gal. bottle ProLube Paste CS oz. tub 17

5 Hacksaw Accessories Automatic-feed pipe clamps save time and effort Self-feeding Pipe Clamp for Pneumatic Saws Air- Powered Clamp Model No Automatic Clamp Save time and effort by automatically cutting pipe up to 3 /4" OD (up to 30" OD with extension chains see page 17) Self-feeding device saves operator time, increases safety and makes work easier Easily attaches to CS Unitec air hacksaw and shares same 90 PSI air supply (Pipe clamp for use only with CS Unitec air hacksaw Model No ) Blade guide for straight cutting through pipe and difficult materials is optional (see below) Self-feeding Pipe Clamp for Electric and Hydraulic Saws Self-Feeding Mechanical Clamp Model No Automatic Clamp Save time and effort by automatically cutting pipe up to 3 /4" OD (up to 30" OD with extension chains see page 17) Self-contained gas cylinder provides constant feed pressure to saw blade Saves operator time, increases safety and makes work easier Easily attaches to CS Unitec electric hacksaw or hydraulic hacksaw Optional blade guide for straight cutting through pipe and difficult materials (see below) Blade Guides Optional guides with two roller bearings Ensure straight cutting through pipe and difficult materials Model No for pipes up to 13" (20" min. blade length required) Model No for pipes up to 21" (30" min. blade length required) Clamps for Pipes and Profiles Model No. CP1 Universal Clamp Self-aligning feet adjust to the form of the workpiece (round, square and angled) Accommodates 1/2" to 3 /4" OD [up to OD with extension chain Part No. CP1/10 (39 3 / long)] 18

6 Hacksaw Blades - up to 37" long Heavy-duty cutting of pipe and structural steel Extra thick for 90 cutting HSS or HSS-SL Saw Blade Shown *Use HSS-SL Blades for best cutting performance on stainless steel and hard metal. Use ProLube Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 17. Order No. Z22-9 HSS Z22-10 HSS Z22-10 HSS-SL* Z22-11 HSS Z22-6 HSS Z22-6 HSS-SL* Z22-6 Carbide Z22-31 HSS Z22-71 HSS Z22-7 HSS Z22-7 HSS-SL* Z22-7 Carbide Z22-29 HSS Z22-32 HSS Z22-33 HSS Z22-72 HSS Z22-72 Carbide Z22-30 HSS Z22-30 HSS-SL* Z22-40 HSS Z22-73 HSS Z22-73 HSS-SL* Z22-73 Carbide Z22-74 HSS Z22-75 HSS Z22-75 HSS-SL* Z22-76 HSS Z22-37 HSS Dimensions Length Teeth/Inch Thickness " " " " " " " " " " " 20" 20" 21" 21" 21" 30" 30" 30" 37" 8 24 Coated Coated 4 Coated /" 3 /" 3 /" and Nonferrous Metal /Aluminum Stainless Sheet Metal Stainless Stainless /Aluminum Cast Iron Stainless Stainless /Aluminum Stainless Cast Iron Plastic and Wood Plastics Plastics/Wood Plastics Plastics/Wood Plastics Plastics/Wood Plastic Ductile/Cast Iron and Cast Iron Max. Dia. of Cut 5 / 5 / 15 5 / 15 5 / 15 5 / 24 7 / 24 7 / 24 7 / 31 7 / 19

Portable Hacksaws for Tough Duty

Portable Hacksaws for Tough Duty Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable

More information

Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools

Product Overview. Electric Pneumatic Hydraulic.   Concrete and Masonry Dust Collection Systems Hot Work Zone Tools Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop

More information

TRAV-L-CUTTER Pipe Cutter

TRAV-L-CUTTER Pipe Cutter TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs

More information

LCSF Low Clearance Split Frame

LCSF Low Clearance Split Frame Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs

More information

P225 STANDARD FEATURES OPTIONAL FEATURES

P225 STANDARD FEATURES OPTIONAL FEATURES CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding

MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special

More information

FERROUS AND NON-FERROUS MATERIAL

FERROUS AND NON-FERROUS MATERIAL Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

Drilling & Tapping Wide selection from a single source. Durable designs.

Drilling & Tapping Wide selection from a single source. Durable designs. Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to

More information

FITTINGS AND HOSES TOOL

FITTINGS AND HOSES TOOL FITTINGS AND HOSES INGERSOLL-RAND FITTINGS AND HOSES The Ingersoll-Rand line of ruggedly convenient hose reels and recoil hoses are pressurerated for optimized pneumatic performance, even in the toughest

More information

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. 1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

More information

Heavy-Duty Needle Scalers

Heavy-Duty Needle Scalers Heavy-Duty Needle Scalers Heavy-Duty Needle Scalers Ideal for cleaning and stress-relieving weld seams and joints; texturing concrete; removing coatings, corrosion and other accumulated materials. Power

More information

Annular Cutters Magnetic Drills Accessories. BY universal drilling & cutting equipment

Annular Cutters Magnetic Drills Accessories. BY universal drilling & cutting equipment BY universal drilling & cutting equipment Annular Cutters Magnetic Drills Accessories Universal Drilling & Cutting Equipment, LTD www.uniborusa.com usa@unibor.com From England s City of Steel Unibor, by

More information

HEAVY DUTY BENCH GRINDERS

HEAVY DUTY BENCH GRINDERS HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with

More information

Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.

Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease. FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).

More information

- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously

- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously Split frame OD-Mounted Pipe Cutting and Beveling Machine The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half

More information

SAWING CATALOG. GRAINGER.COM/CHOICE l Grainger

SAWING CATALOG. GRAINGER.COM/CHOICE l Grainger SAWING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger BENCH MITER BAND SAW A bench top band saw comes with large cutting capacities. Easy to move and position where needed this lightweight bench unit is

More information

$42, $46, Product Brochure For S961. Features

$42, $46, Product Brochure For S961. Features HG-3212VR - 3200 x 12mm Mild Steel Shearing Capacity 1-Axis Ezy-Set NC-89 Go-To Control & Hardened Ballscrew Backgauge ORDER CODE: MODEL: Ex GST Inc GST $42,500.00 $46,750.00 S961 HG-3212VR Shearing Capacity

More information

400 Series. General Purpose Saws

400 Series. General Purpose Saws 400 Series General Purpose Saws OVERVIEW The 400 Series general purpose band saws are part of DoALL s introductory machines in the NEW StructurALL family of saws. The 400 Series are the ideal machines

More information

Heavy Duty Pipe Wrench

Heavy Duty Pipe Wrench Heavy Duty Pipe Wrench High-tensile ductile iron handle and hardened tool-steel parts. Designed to withstand heavy demands. Easy-spin adjusting nut is heat-treated for durability. Drop-forged jaw is heat-treated

More information

PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES

PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:

More information

US80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE

US80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com

More information

Wheeler Rex Ashtabula, Ohio Tel: Fax:

Wheeler Rex Ashtabula, Ohio Tel: Fax: Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395

More information

Cutting, Drilling and Beveling

Cutting, Drilling and Beveling Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized

More information

SPIDA SAW OPERATIONS MANUAL

SPIDA SAW OPERATIONS MANUAL SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the

More information

Industrial. Pipe Cutting and Beveling Products. > 10/2011 European Catalogue. precision. power. simplicity.

Industrial. Pipe Cutting and Beveling Products. > 10/2011 European Catalogue. precision. power. simplicity. Industrial Pipe Cutting and Beveling Products. > 10/2011 European Catalogue EN precision. power. simplicity. Superior Equipment. Portable Milling Machines Trav-L-Cutter The WACHS Trav-L-Cutter is a portable

More information

FITTINGS & GAUGES 20,000 PSI

FITTINGS & GAUGES 20,000 PSI PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled

More information

Portable Magnetic Drilling Machines

Portable Magnetic Drilling Machines Portable Magnetic Drilling Machines PORTABLE MAGNETIC DRILLS Fast, accurate hole cutting on the job site or in the shop! Designed for continuous operation, CS Unitec's portable magnetic drills are ideal

More information

Pneumatic Drill / / Technical Specification

Pneumatic Drill / / Technical Specification CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506

More information

Special Brushes for Metals, Wood and Hard Plastics

Special Brushes for Metals, Wood and Hard Plastics Pneumatic Surface Finisher Save time sanding and polishing. 4 wide face is ideal for finishing stainless steel, metals, wood and synthetics. PNEUMATIC SURFACE FINISHER / ACCESSORIES / SPECIAL BRUSHES The

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J

More information

CSNC CARBIDE CIRCULAR SERIES

CSNC CARBIDE CIRCULAR SERIES CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT

More information

Brandt Automatic Edgebander Optimat Model KDF 670 2C

Brandt Automatic Edgebander Optimat Model KDF 670 2C Brandt Automatic Edgebander Optimat Model KDF 670 2C PC-16 Program Control: - Color matrix LCD screen display - 8mb RAM - Manual push button controls or program control operation Equipped with digital

More information

FICHE TECHNIQUE. 275 C - ZA du Jasmin SAINT GENIX SUR GUIERS - Tel: +33 (0)

FICHE TECHNIQUE. 275 C - ZA du Jasmin SAINT GENIX SUR GUIERS - Tel: +33 (0) 2880 x 27 x 0,9 Universal robust band saw is appraised for general use in continuous uninterrupted production plants and in work-shops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm

More information

Portable Magnetic Drilling Machines

Portable Magnetic Drilling Machines Fast, accurate hole cutting on the job site or in the shop! Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steel and virtually any metal. We offer

More information

High Precision Air Chucks

High Precision Air Chucks Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

HANDHOLE SEAT GRINDER

HANDHOLE SEAT GRINDER 1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,

More information

SPLIT FRAME CUTTING & BEVELING MACHINES

SPLIT FRAME CUTTING & BEVELING MACHINES SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold

More information

Drilling and Tapping. A Buyers Guide.

Drilling and Tapping. A Buyers Guide. Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

Orbital welding systems and accessories for high-purity process piping

Orbital welding systems and accessories for high-purity process piping ORBIWELD TP Open orbital weld heads The ORBIWELD TP series offers outstanding features in terms of design and functionality: An extremely compact design has been achieved thanks to the drive motor that

More information

DRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger

DRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice

More information

METALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure

METALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure Product Brochure S9615 METALMASTER HG-3216VR Hydraulic NC Guillotine - Variable Rake 3200 x 16mm Mild Steel Shearing Capacity Page 1 of 5 Right View Front View Side View Rear Guarding 3 Safety Electronic

More information

IWB-40 - Industrial Work Bench

IWB-40 - Industrial Work Bench IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load

More information

SBD-25A - Bench Drill 20mm Drill Capacity 2MT

SBD-25A - Bench Drill 20mm Drill Capacity 2MT SBD-25A - Bench Drill 20mm Drill Capacity 2MT ORDER CODE: D144 MODEL: SBD-25A Type - Bench / Pedestal : Bench Duty Type: Heavy-Duty Drill Capacity (mm): 20 Spindle Taper (MT): 2 Spindle Travel (mm): 80

More information

DUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles

DUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles DUGARD Machine Tools Since 1939 Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles www.dugard.com Designed for Precision Part Machining of; One-Hit Machining Automobile, motorcycle and bicycle

More information

ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

Underwater Tool Section

Underwater Tool Section Underwater Tool Section Tools for Underwater Construction, Salvage and Demolition Stanley Hydraulic Tools is a leading worldwide provider of underwater hydraulic tools to professional divers, marine maintenance,

More information

KM3000 PORTABLE KEY MILL

KM3000 PORTABLE KEY MILL KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,

More information

IWB-12 - Industrial Work Bench

IWB-12 - Industrial Work Bench IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number

More information

Holemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions

Holemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.

More information

Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It

Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.

More information

BD Bench Drill - Belt Drive 16mm Drill Capacity 2MT

BD Bench Drill - Belt Drive 16mm Drill Capacity 2MT BD-325 - Bench Drill - Belt Drive 16mm Drill Capacity 2MT Ex GST Inc GST $320.00 $352.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): Spindle Travel

More information

Celebrating. 65 Years

Celebrating. 65 Years Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:

More information

Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2

Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco

More information

High Pressure Pneumatic Tools. Satisfy Professional's Needs

High Pressure Pneumatic Tools. Satisfy Professional's Needs High Pressure Pneumatic Tools Satisfy Professional's Needs 30%LESS WEIGHT AND VOLUME Makita High Pressure Pneumatic Tools CONCEPT Weight and volume of tool is much less than normal pneumatic tool by using

More information

WIRE ROPE LUBRICATING SYSTEM

WIRE ROPE LUBRICATING SYSTEM PROVIDES FAST AND EFFECTIVE CLEANING AND LUBRICATION OF WIRE ROPES BY FORCING QUALITY LUBRICANT UNDER HIGH PRESSURE TO THE CORE OF THE WIRE ROPE WIRE ROPE LUBRICATING SYSTEM 13 TS BENEFITS: Lightweight,

More information

Pipe Cutters (Metal) BT The BT is designed to fit the Berkley BT-5020 Power Threader as well as the RIDGID Model No. 300 and 535.

Pipe Cutters (Metal) BT The BT is designed to fit the Berkley BT-5020 Power Threader as well as the RIDGID Model No. 300 and 535. Berkley Tool is proud to offer the most comprehensive selection of replacement parts and accessories for pipe threading and cutting equipment. Berkley s high quality products are also designed as replacement

More information

Carbide Circular Sawing Systems. P-70B Min. 5/8 Max Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max.

Carbide Circular Sawing Systems. P-70B Min. 5/8 Max Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. Carbide Circular Sawing Systems P-70B Min. 5/8 Max. 2.75 Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. 6 Capacity Carbide Circular Saws Standard Features Include Servo Driven Automatic

More information

200SERIES ID MOUNT PIPE BEVELING EQUIPMENT

200SERIES ID MOUNT PIPE BEVELING EQUIPMENT 200SERIES ID MOUNT PIPE BEVELING EQUIPMENT Tri Tool manufactures the finest portable beveling machines that deliver maximum precision, reliability and performance Model 214B 2 BEVELING WELD END PREPARATION

More information

ARG 330 plus H.F. OFFER SHEET. Pilous. Železná 9, Brno, Czech Republic Tel.:

ARG 330 plus H.F. OFFER SHEET. Pilous. Železná 9, Brno, Czech Republic Tel.: OFFER SHEET Pilous ARG 330 plus H.F. Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz A completely new, revolutionary concept of the band saw arm casting

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.

More information

SAWS JET 10 Proshop Tablesaw JET 14 Industrial Bandsaw JET 18 Bandsaw PLANER/THICKNESSERS JPT260M Jet Combo Planer/Thicknesser JPT310 Jet Combo Planer/Thicknesser JML1014I Jet Combo Planer/Thicknesser

More information

nd saws tal ba Me 139

nd saws tal ba Me 139 Metal band saws 139 Saw band information s The feedstock is a two-component material (bi-metal) attained by electrode welding. The band which is manufactured from this material has a hard curable, hard-wearing

More information

When semi-automatic brings full satisfaction.

When semi-automatic brings full satisfaction. Powerful solutions passionate people When semi-automatic brings full satisfaction. SKL 450 E SEMi-automatic mitre circular saw > MADE IN GERMANY SKL 450 E semi automatic MITRE CIRCULAR SAW ADVANTAGES AT

More information

SSB-18WS - Stainless Steel Work Bench

SSB-18WS - Stainless Steel Work Bench SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):

More information

US SERIES ID MOUNT MACHINING EQUIPMENT. Ø 8 mm mm Ø INDUSTRIES : ID MOUNT MACHINING SM8 S18 US25 US30CH US40 US80 US150 US450

US SERIES ID MOUNT MACHINING EQUIPMENT. Ø 8 mm mm Ø INDUSTRIES : ID MOUNT MACHINING SM8 S18 US25 US30CH US40 US80 US150 US450 US SERIES ID MOUNT MACHINING EQUIPMENT Ø 8 mm - 914 mm Ø 0.315 36 ID MOUNT MACHINING US Series SM8 S18 US25 US30CH US40 US80 US150 US450 10 Machining Capacity 8-32 mm 14-42 mm 12.5-120 mm 32-168.3 mm 43-219

More information

Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases

Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT

More information

THE LOG SPLITTER YOU WILL ENJOY USING.

THE LOG SPLITTER YOU WILL ENJOY USING. BY CENTRAL BOILER THE LOG SPLITTER YOU WILL ENJOY USING. STRYKER log splitters offer quality workmanship second to none. Because of their unique design and manufactured finish, they require much less power

More information

Model 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS

Model 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS 92-0697 Rev. 970131 Model 204B-EM Elbow Mandrels TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 MAINTENANCE 7 OPERATION 8 TROUBLE SHOOTING 11 ACCESSORIES

More information

Cyclone Upcut Cut off saw

Cyclone Upcut Cut off saw Cyclone Upcut Cut off saw Operation manual WARNING The operator must thoroughly read and understand this manual before operating the cut off saw or starting any servicing. All safety and warning instructions

More information

Guide to Pipe Beveling

Guide to Pipe Beveling Guide to Pipe Beveling Make Weld Ready Bevels on Pipe to Fit Your Application When welding two pieces of pipe together the ends of the pipe must be properly prepared to obtain the best possible weld joint.

More information

Sheet Metal Tools. by:prem Mahendranathan

Sheet Metal Tools. by:prem Mahendranathan Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill

More information

Designed to cut extra-wide keyways, stress relief pockets, motor mounts slots, and more.

Designed to cut extra-wide keyways, stress relief pockets, motor mounts slots, and more. KM4000 Keymill 2013 10 KM4 Designed to cut extra-wide keyways, stress relief pockets, motor mounts slots, and more. A compact, rugged, portable milling machine, the fully CE-Compliant KM4000 Portable Key

More information

Resistance thermometers for process technology

Resistance thermometers for process technology Data Sheet 90.2820 Page 1/8 Resistance thermometers for process technology for temperatures from -200 to +600 C with protection tubes in stainless steel, titanium, tantalum, Iconel and Hastelloy available

More information

PD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT

PD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT PD-440 - Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT Ex GST Inc GST $780.00 $858.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): D598 PD-440

More information

MS HYDRAULIC GUILLOTINE SHEAR

MS HYDRAULIC GUILLOTINE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere

More information

Holemaking. Contents MADE FOR THE TRADE!

Holemaking. Contents MADE FOR THE TRADE! Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,

More information

FF3000 FLANGE FACER. Compact, lightweight, and easy to set up. 04 FF3

FF3000 FLANGE FACER. Compact, lightweight, and easy to set up. 04 FF3 FF3000 FLANGE FACER 2014 04 FF3 Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the most compact on the market today. Lightweight, weighing only

More information

ARCMASTER. 401MST Multi-Process Inverter Power Source Part No. W

ARCMASTER. 401MST Multi-Process Inverter Power Source Part No. W ARCMASTER 401MST Multi-Process Inverter Power Source Part No. W1009500 Leading New MICOR Technology High Efficiency Resonance Inverter Best In Class Welding Performance Built Tough For Extreme Use Lightweight

More information

saw SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed

saw SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed METAL BAND SAWS SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed Ball bearing mounted saw band guiding providing outstanding

More information

POWERMATIC PWBS-14 Bandsaw

POWERMATIC PWBS-14 Bandsaw POWERMATIC PWBS-14 Bandsaw The versatility of the bandsaw has made it a favorite of woodworkers for decades. The POWERMATIC PWBS-14 Bandsaw was designed to be rugged, accurate and to bring a surprising

More information

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018

More information

METAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR

METAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere

More information

TSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B EBS 100 B

TSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B EBS 100 B O.R.P.I., S.L. C/ Juan de la Cierva, 23 50014 Zaragoza Tel: 976 471 440 www.orpi-sl.com orpi@orpi-sl.com TSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B

More information

COJSAWBX Electric Jig Saw Assembly & Operating Instructions

COJSAWBX Electric Jig Saw Assembly & Operating Instructions COJSAWBX Electric Jig Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.

More information

Nailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers

Nailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers Nailbiter Premium Ship Auger Bits Dual-Helix construction with twin cutting edges for faster and smoother drilling action, even through nail-embedded timbers Full body, dual induction heat treatment ensures

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

THE LOG SPLITTER YOU WILL ENJOY USING.

THE LOG SPLITTER YOU WILL ENJOY USING. BY CENTRAL BOILER THE LOG SPLITTER YOU WILL ENJOY USING. STRYKER log splitters offer quality workmanship second to none. Because of their unique design and manufactured finish, they require much less power

More information

CHIP AND DUST EXTRACTION SYSTEMS

CHIP AND DUST EXTRACTION SYSTEMS CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories

More information

AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity

AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):

More information

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x

More information

variety of cuts including chamfers, O-Ring grooves, lens rings and other angular surfaces.

variety of cuts including chamfers, O-Ring grooves, lens rings and other angular surfaces. FF6300 FLANGE FACER 6 2015 FF63 Performance. Versatility. Safety. The rigid and versatile FF6300 delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently

More information

OTTO ARC HIGH PERFORMANCE

OTTO ARC HIGH PERFORMANCE HIGH PERFORMANCE OTTO ARC www.ottoarc.com ORBITAL WELDING ORBITAL WELDING ORBITAL WELD VELING BEVELING BEVELING BEVELING BEVELING RING SQUARING SQUARING SQUARING SQUARING S OTTO ARC SYSTEMS, INC SUMMER

More information

SPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "

SPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two

More information

Operator's manual. TruTool TKF 1100 (1A1) TruTool TKF 1101 (1A1)

Operator's manual. TruTool TKF 1100 (1A1) TruTool TKF 1101 (1A1) Operator's manual TruTool TKF 1100 (1A1) TruTool TKF 1101 (1A1) Table of contents 1 Safety 3 1.1 General safety information 3 1.2 Specific safety information for beveler 3 2 Description 5 2.1 Intended

More information