Superstrut Stainless Steel Channels and Accessories
|
|
- MargaretMargaret Wiggins
- 5 years ago
- Views:
Transcription
1 In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware Clamps and Hangers
2 Wire & Cable Management Superstrut Stainless Steel Channel & Accessories Channels B " 13 1 Metal Framing Channels 12- or 14-gauge Type 304 or Type 316 stainless steel Available in 10-ft. and 20-ft. lengths with standard length tolerance of ± 1 8 Choose standard or shallow and solid or half-slot style A1200HS 7 8" 7 8" Half-Slot A1202 TYPE 304 STAINLESS TYPE 316 STAINLESS STYLE STEEL GAUGE LENGTH (FT.) A SS A T316SS A SS A T316SS A1200HS-10-SS A1200HS-10-T316SS A1200HS-20-SS A1200HS-20-T316SS B SS B T316SS B SS B T316SS B1400HS-10-SS B1400HS-10-T316SS B1400HS-20-SS B1400HS-20-T316SS A SS A T316SS A SS A T316SS A1202HS-10-SS A1202HS-10-T316SS A1202HS-20-SS A1202HS-20-T316SS WIDTH IN HEIGHT 46
3 Channel Fittings and Hardware The hardware to bring your connections together. Type 304 Stainless Steel Nuts and Bolts E-145 Standard Hex Nut H-119 Rod Coupling E-145-1/4SS E-145-3/8SS E-145-1/2SS E-145-5/8SS E-145-3/4SS E-145-7/8SS E-145-1SS E-147 Flat Steel Washer E-147-1/4SS E-147-5/16SS E-147-3/8SS E-147-1/2SS E-147-5/8SS E-147-3/4SS E-147-7/8SS E-142 Hex Head Cap Screw E-142-1/4X1SS E-142-1/4X1-1/2SS E-142-3/8X1SS E-142-3/8X1-1/2SS E-142-1/2X15/16SS E-142-1/2X1-1/2SS Consult your T&B representative for additional sizes. H-119-1/4SS H-119-3/8SS H-119-1/2SS EF-147 Fender Washer EF-147-1/4SS EF-147-3/8SS EF-147-1/2SS B-100 Short Spring Nut Nut is square over 1 2" size For all B series channel and inserts B-100-1/4SS B-100-5/16SS B-100-3/8SS B-100-1/2SS Wire & Cable Management Superstrut Stainless Steel Channel & Accessories A-100 Regular Spring Nut AB-100 Springless Nut Nut is square over 1 2" size For all A and C series channel and inserts Nut is square over 1 2" size For use with all channels A-100-1/4SS A-100-5/16SS A-100-3/8SS A-100-1/2SS A-100-5/8SS A-100-3/4SS A-100-7/8SS AB-100-1/4SS AB-100-5/16SS AB-100-3/8SS AB-100-1/2SS AB-100-5/8SS AB-100-3/4SS 47
4 Wire & Cable Management Superstrut Stainless Steel Channel & Accessories Channel Fittings and Hardware Type 304 Fittings Flat Plate Fittings 5 5 8" 5 3 8" AB220SS AB207SS 90 Corner Fittings or Brackets 2 1 4" AB201SS 3 5 8" 2 1 4" AB204SS 2" AB202SS AB213SS 3 3 4" " 3 5 8" AB206SS 7 1 4" X207SS AB203SS AB214SS 3 7 8" AB219SS " AW219SS 45 Fittings " " AB225SS SPAB-227SS 48
5 Channel Fittings and Hardware Pedestal Base " Dia. AP-232SS Type 316 Fittings 5 3 8" AB220T316SS 4 Holes 3 4" Dia " 4 1 4" AB201T316SS AP-232SQSS 2 1 4" AB203T316SS AP-235SS Flat Plate Fitting 90 Corner Fittings or Brackets 45 Fitting 3 4" Dia. Continuously threaded rod for use with conduit hangers and strut to suspend overhead conduit runs. All-Thread Rod Available in Type 304 or Type 316 stainless steel Comes in standard 6- or 12-ft. lengths 3 1 4" AB205T316SS 4 Holes 3 4" Dia " 4 1 4" AP-235SQSS AB225T316SS 4 1 4" Wire & Cable Management Superstrut Stainless Steel Channel & Accessories TYPE 304 TYPE 316 LENGTH (FT.) THREADS PER INCH H104-1/4X6SS H104-1/4X6SS316 H104-1/4X12SS H104-1/4X12SS6 H104-3/8X6SS H104-3/8X6SS316 H104-3/8X12SS H104-3/8X12SS6 H104-1/2X6SS H104-1/2X6SS6 H104-1/2X12SS H104-1/2X12SS316 H104-5/8X6SS H104-5/8X6SS316 H104-5/8X12SS H104-5/8X12SS316 49
6 Wire & Cable Management Superstrut Stainless Steel Channel & Accessories Clamps and Hangers Pipe Supports RC Clamp EC Clamp PC Clamp TYPE 316 STAINLESS O.D. OF CONDUIT OR PIPE DIMENSIONS (IN.) NOM. CONDUIT OR PIPE SIZE STD. CTN. RC Series RC-3/8SS316 RC-1/2SS316 RC-3/4SS316 RC-1SS316 RC-1-1/4SS316 RC-1-1/2SS316 RC-2-SCSS316 RC-2-1/2SS316 RC-3SS316 RC-3-1/2SS316 RC-4-SCSS316 EC Series EC 1/2SS316 EC-3/4SS316 EC-1SS316 EC-1-1/4SS316 EC-1-1/2SS316 EC-2SS316 EC-2-1/2SS316 EC-3SS316 Type 316 Stainless Steel Beam Clamps TYPE 316 STAINLESS O.D. OF CONDUIT OR PIPE DIMENSIONS (IN.) NOM. CONDUIT OR PIPE SIZE STD. CTN. PC-3/8SS316 PC 1/2SS316 PC-3/4SS316 PC-1SS316 PC-1-1/4SS316 PC-1-1/2SS316 PC-2SS316 PC-2-1/2SS316 PC-3SS316 PC-3-1/2SS316 PC-4SS316 A B BASE A B JAW OPENING (IN.) TAPPING OF BASE AND BACK HOLES SET SCREW LOAD RATING TORQUE IN INCH-LBS. STD. CTN. 500SS SS SS316 Safety factor of 3. Loan Ratings based on bottom hole of Beam Clamp. CSA File No. LR
7 Clamps and Hangers Conduit and Pipe Hangers Accommodates 1 2 through 4 EMT or rigid conduit Can be used for either vertical or horizontal installation 6H-TB Series has a builtin nut, so there are fewer parts to handle or drop Installs easily with a screwdriver Type 304 stainless steel construction Fig. 1 6H Series without Bolt Fig. 3 6H-T Threaded Series without Bolt WITHOUT BOLT WITH BOLT RIGID CONDUIT FIG. NO. FIG. NO. EMT (IN.) OR PIPE (IN.) STD. CTN. 6H0SS 6H0 BSS 6H0 TSS 6H0 TBSS 6H1SS 6H1-BSS 6H1-TSS 6H1-TBSS 6H2SS 6H2-BSS 6H2-TBSS 6H2 1/2SS 6H2 1/2-BSS 6H2 1/2-TBSS 6H3-SCSS 6H3-BSS 6H3-TBSS 6H4SS 6H4-BSS 6H4-TBSS 6H5SS 6H5-BSS 6H5-TBSS 6H6SS 6H6-BSS 6H7SS 6H7-BSS 6H8SS 6H8-BSS 6H9SS 6H9-BSS Loading rating 500 lbs. with a safety factor of 3. Fig. 2 6H-B Series with Bolt and Hex Nut Fig. 4 6H-TB Threaded Series with Bolt Wire & Cable Management Superstrut Stainless Steel Channel & Accessories 51
8 Wire & Cable Management Superstrut Stainless Steel Channel & Accessories Clamps and Hangers Takes a bite out of your installation time! Cobra One-Piece Cable and Pipe Clamp One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and re-assemble, no screws or bolts to drop Installs quickly and securely using one hand Universal bolt head accepts a range of tools Eliminates the guesswork from clamp selection one catalog number attaches equal trade sizes of EMT and rigid conduit Parallel hook design keeps conduits and cable square with strut Reconfigure wiring without complete disassembly; remove cables easily without disturbing neighboring clamps FOR EMT AND RIGID CONDUIT TRADE CABLE O.D. RANGE (IN.) STATIC LOAD LIMIT (LB) SAFETY FACTOR = 4 Type 316 Stainless CPC050SS6 CPC075SS6 CPC100SS6 CPC125SS6 CPC150SS6 CPC200SS6 CPC250SS6 CPC300SS6 CPC350SS6 CPC400SS6 Type 304 and Type 316 Pipe Straps Combination slot and hex head bolt for flexibility of attachment Captivated square nut on shoulder enables easy one-handed tightening TYPE 304 TYPE 316 CONDUIT STD. CTN. O.D /8SS 702-3/8T316SS 702-1/2SS 702-1/2T316S 702-3/4SS 702-3/4T316SS 702-1SS 702-1T316SS /4SS /4T316SS /2SS /2T316SS STRSS STRT316SS /2SS /2T316SS 702-3SS 702-3T316SS /2SS /2T316SS 702-4SS 702-4T316SS /2SS /2T316SS 702-5SS 702-5T316SS 702-6SS 702-6T316SS 52
Cat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationFURNITURE LABORATORY METAL FRAMING SYSTEM. For additional information and help in planning contact Mott Manufacturing.
LABORATORY Continuous Slot Metal Framing System For additional information and help in planning contact Mott Manufacturing. G22 Connection Instructions Installs quickly Completely adjustable Re-usable
More informationTechline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationInstallation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
More informationSteel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationCATALOG. Kindorf metal framing system Metal framing channel and accessories
CATALOG Kindorf metal framing system Metal framing channel and accessories Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationINSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationHangers. Vertical Flange. Hangers BF3 For S" Hooks, 100 Bolting Straps and Wrap Wire
Suspend wire, or plain and threaded rod from vertical flanges. Fits vertical flanges 1 /16" to 1 /4" thick. Static Load Capacity: 160 Lbs. Vertical Flange 78101104270 BF3 For S" Hooks, Bolting Straps and
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationMSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox
INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays
More informationA - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationINSTALLATION INSTRUCTIONS 3"/4 BENT END SIDEBARS FORD F-150 SUPERCREW PART # DZ /DZ
INSTALLATION INSTRUCTIONS 09-12 FORD F-150 SUPERCREW PART # DZ 372697/DZ 372699 PARTS LIST: 1 Driver/Left Sidebar 4 1/2 Lock Washers 1 Sidebar 4 12mm x 32mm OD x 3mm Flat Washers 1 Driver/Left Mounting
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationTABLE OF CONTENTS REQUIRED TOOLS
TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationSIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More information3.0mm Rod Fixings Components
800-753-9688 sales@novadisplay.com www.novadisplay.com 3.0mm Rod Fixings Components 3mm Basic Rod Fixings RB1 RB2 RBT1 1.0M (3' 3-3/8") LONG ROD WITH ADJUSTABLE ANGLE FIXING - Screw Fixing Type for Ceiling
More informationIN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationThe Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
More informationInstallation Instructions for Solar Snow Pad (SSP-T-3)
Installation Instructions for Solar Snow Pad (SSP-T-3) Warning- Do not use this product on solar arrays where the calculated array snow loads exceed 50 pounds per square foot (psf). Most solar panels are
More informationDesk/Wall-Mount Rack
Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More information$50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse.
AURORA BRAND Pipe Hangers SCHEDULE: H-2010 EFFECTIVE: 5-Apr and Supports 2010 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 1387 Cornwall
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationSide-of-Pole Mount for 4 Modules (SPM4) For Module Type B ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 4 Modules (SPM4) For Module Type B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3358-2 PCN 060712-5 Side-of-Pole Mount for 4 Modules (SPM4) For
More informationCMA-455 Suspended Ceiling-Tile Reinforcing Kit
INSTALLATION INSTRUCTIONS CMA-455 Suspended Ceiling-Tile Reinforcing Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products) when installing these products in a suspended
More informationInc. BT Series. BW Series
Inc. 2013 BT Series BW Series Inc. Fast Installation One of the prime features of the RangeRack cable tray design is that the channel-style siderails accept spring nuts. This eliminates the need for any
More informationINSTALLATION INSTRUCTIONS ELEVATION FRONT BUMPER CHEVY SILVERADO
INSTALLATION INSTRUCTIONS ELEVATION FRONT BUMPER PARTS LIST: 1 Heavy Duty Bumper Assembly 6 12-1.75mm x 50mm Hex Bolts 1 Driver Mounting Bracket 30 12mm x 37mm OD x 3mm Flat Washers 1 Passenger Mounting
More information43107 Rhino Jerry Can Holder Rhino Jerry Can Holder - Horizontal
Important: Please read these instructions carefully prior to installation. Check the contents of kit before commencing fitment and report any discrepancies. Clean the alloy tray prior to installation.
More informationIn This Section. Hangers, Clamps and Spring Steel Fasteners. Steel City Hangers, Clamps and Spring Steel Fasteners E-1
In This Section Steel City Spring Steel Fasteners Overview...E-3 Beam and Purlin Clamps...E-4 E-9 Hangers...E-10 E-11 Conduit and Cable Supports...E-12 E-20 Stud Wall/Drywall Supports, Clips and Brackets...E-21
More informationFLOE quick attach & standard sectional dock and leg kits
FLOE quick attach & standard sectional dock and leg kits assembly instructions KIT P/N 510-02550-00 X-SHALLOW KIT P/N 510-02551-00 SHALLOW KIT P/N 510-02552-00 MEDIUM KIT P/N 510-02553-00 DEEP WARNING
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationROOFSAFE ANCHOR & CABLE
Installation Instructions ROOFSAFE ANCHOR & CABLE THE ULTIMATE IN FALL PROTECTION MANUAL Contents Guidelines for Installation 3 Top Bolt Installation 4 Toggle Installation 5 Concrete Installation 6 Component
More informationBMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit
BMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit Thank you for purchasing the Micatech Pack Rack and Top Case, with R1100/1150GS mount kit. Please
More informationMidwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationULTRA SPACE SAVER Installation Instructions
Installation Instructions The Ultra Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationAURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
More informationDBP Technical Data Series Rev. 0 Jan. 1, Pre Assembled Door Canopies
Technical Data Series Revised: 1 January, 2011 Article IX. SECTION 9.01 PERSONAL DOOR CANOPIES...3 SECTION 9.02 ERECTION INSTRUCTIONS...4 SECTION 9.03 ERECTION ILLUSTRATIONS...7 SECTION 9.04 MULL INSTRUCTIONS
More informationSteel City Hangers, Clamps & Fasteners
In this section... Steel City Hangers, Clamps & Fasteners Steel City Hangers, Clamps & Fasteners Overview... B-222 B-223 Beam and Purlin Clamps... B-224 B-229 Hangers... B-230 B-23 Conduit and Cable Supports...
More informationBefore returning this product to the store of purchase
Before returning this product to the store of purchase Contact Dee Zee if you experience the following problems: Missing Parts Installation Problems/Questions Warranty Questions 1.800.779.2102 Hours of
More informationOne Piece LSD/Vector Pads from TIE DOWN ENGINEERING Easier installation with 70% fewer parts Lower cost with competitive pricing
NEW! One Piece SD/ector Pads from TIE DOWN ENGINEERING Easier installation with 70% fewer parts ower cost with competitive pricing Do the Math! Compare material and labor cost with the New SD and ector
More informationABW-4-SSP ABW-5-SSP 5 ABW-6-SSP 6 ABW-7-SSP 7 ABW-4-ESP ABW-5-ESP 5 ABW-6-ESP 6 ABW-7-ESP 7 ABW(*)24HSP ABW(*)36HSP. Furnished in pairs with hardware.
Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. ABW--SSP ABW--SSP
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationSide-of-Pole Mount for 4 Modules (SPM4) For Module Type D
Side-of-Pole Mount for 4 Modules (SPM4) For Module Type D ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 060712-7 Side-of-Pole Mount for 4 Modules (SPM4) For Module Type
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More informationARCHITECTURAL HARDWARE
05 52 00/JOH BuyLine 7969 ARCHITECTURAL HARDWARE 2009 AMERICA S #1 MANUFACTURER OF STAINLESS STEEL CABLE FITTINGS - SINCE 1958 C. Sherman Johnson Co. Inc. East Haddam, CT USA 1-800-874-7455 www.csjohnson.com
More informationULTRA SPACE SAVER SQUARED Installation Instructions
Installation Instructions The Ultra Space Saver Squared has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationRoof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
More informationPROFILE Flat Panel Console System Installation Manual
PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double
More informationTitan Series Awning Assembly and Installation Instructions
Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD FORD ESCAPE
INSTALLATION INSTRUCTIONS GRILLE GUARD 08-010 FORD ESCAPE PARTS LIST: 1 Grille Guard 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Frame Mounting 4 10mm Lock Washers 1 Passenger/Right Frame Mounting 6 10mm
More informationAssembly Instructions
Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationIN-30000_F. Installation Instructions
IN-30000_F Installation Instructions Parts Overview Detail A Detail B Detail C Detail A Detail C Detail B Parts List & Tools PARTS ITEM NO. PART NUMBER DESCRIPTION Qty 1 01-30008-01 P/C,DOUBLE T-SLOT CROSSBAR,
More informationETX Powered Loudspeaker Accessories
ETX Powered Loudspeaker Accessories ETX-BRKT10, ETX-BRKT12, ETX-BRKT15, ETX-TCA-S, ETX-TCA-L, and ETX-BRKT35 en Installation Guide en 3 Table of contents 1 Safety 4 2 Installation 6 2.1 Wall mount bracket
More informationMDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop
500 460 MDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop Check if Applicable TRAFFIC SIGNAL SPECIAL DETAILS INDEX/CHECKLIST *One completed checklist required
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. Instruction Sheet Wood Joist 2-1/2 Ft. Drop Ceiling
More informationConduit End Bells...EA1 Hex Reducing Bushings...EA2 Conduit Hubs...EA3-EA4. Split Couplings...EA5 Three Piece Couplings...EA6 Conduit Nipples...
SECTION E INDEX Product Description Page Number Conduit End Bells.......................................EA Hex Reducing Bushings..................................EA2 Conduit Hubs......................................EA-EA4
More informationShorePort PWC Lift Instructions " x 138" Sandstone ShorePort " x 138" White ShorePort " x 138" Tan ShorePort
ShorePort PWC Lift Instructions 00-8" x 8" Sandstone ShorePort 009-8" x 8" White ShorePort 090-8" x 8" Tan ShorePort....... - PUT SAFETY FIRST To avoid the risk of personal injury or death, study and fully
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More informationAssembly & Installation Instructions
Assembly & Installation Instructions FOR SUBFRAME COMPONENTS PACKAGE 100760 TO FIT 1-2004 TOYOTA TACOMA 4x4 16-2002 TOYOTA 4 RUNNER 4x4 22 SERIES ONLY 2008 Sno-Way International 7101078B 1. THINK SAFETY,
More informationPC-196 B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG. Publication 501-TAB 8
B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG Publication 501-TAB 8 Revision A November 1, 1991 APPROX. COMPLETE HANDBRAKE NET WT PART NO. TON WHEEL WHEEL ASSEMBLY LBS (CAR SET) CAR BASE DIA. PART
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationCEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual
CEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual This manual is for various mounting types and plain and trussed track profiles. ISO 9001:2008 Registered Manual 103-0075
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationOPERATOR ADAPTER APCABVA
OPERATOR ADAPTER APCABVA Installation Instructions for Allen-Bradley Bulletin 1494V (Variable Depth) 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More information