File Project Data File1.TXT contains Data for creating PLAN drawing of a road section by reading Model & String from the Model files,
|
|
- Emery Harrison
- 6 years ago
- Views:
Transcription
1 ================================== HEADS Pro Release 14.1, User s Guide for Tutorial Data Tutorial 12B PLAN Drawings : Base Plan DXF ================================== Process: The folder Tutorial 12B PLAN Drawings>>Base Plan DXF>>Project Data contains the files MODEL.FIL, MODEL.LST, Halign.FIL, Project Data File1.TXT and Project Data File2.TXT, File Project Data File1.TXT contains Data for creating PLAN drawing of a road section by reading Model & String from the Model files, File Project Data File2.TXT, contains Data for creating PLAN drawings of a road section by reading PLAN1.DXF drawing of the whole road, Layout.FIL file for Drawing Sheet Layouts, Halign.FIL for writing Chainages & HIP details in the drawings Road Centre Line control string is M001 and finally creating a set of drawings as PLAN1.DXF, PLAN2.DXF following the Drawing Sheet Layouts as available in file Layout.FIL. Note: In data for 1100 PLAN in file Project Data File1.TXT, doesn t have any text details for Chainage, HIP details and Grid Coordinates are not mentioned, only text details is mentioned for Contour elevations as Model CONTOUR and String ELEV. The other text details for Chainage, HIP Details and Grid Coordinates will be created later on by processing the file Project Data File2.TXT, Using Heads Pro Menu Option File>>Open, Select file Project Data File1.txt and Click on Open, 1
2 The Project Work Space box comes with list of process option for PLAN Drawing as mentioned in the Project Data File1.txt, Click on button Proceed, The Process starts and the Dialog Box comes and Click on button Proceed, when the process is over click on button OK & Finish, 2
3 The Plan drawing is created as PLAN1.DXF inside folder Design Drawings within the working folder, Cut & Paste the drawing from folder Design Drawings to outside in the folder Project Data, Getting back to the Project Work Space screen, Click on button HEADS Viewer, As the Heads Viewer opens select menu option File>>Open, 3
4 Select the drawing file PLAN1.DXF to open it, As the drawing opens, Select Heads Viewer menu option View>>Zoom>>Zoom All Select Heads Viewer menu option Design>>Chainage>>ON, the Chainages are displayed by reading from the file HALIGN.FIL, which must exist in the current working folder of Heads Viewer, and that s why we brought the drawing in the folder Project Data Files, 4
5 Next, the Dialog box will come for Chainage, Select String M001 and enter other data as shown, Click on button OK, the Chainages will be displayed along the alignment, which will not be in the saved PLAN drawing and will be created later on, As the Chainages are displayed zoom the desired location to mark tentatively every 1000m (1.0 Kilometres) by drawing lines, So the lines are placed on Chainages and in the drawing, Now select Heads Viewer menu option Design>>Layout>>Apply, The Layout Dialog box will come as shown below, Enter Bottom Margin 210, Click on OK, 5
6 Click on any point in the Drawing, the drawing sheet will be placed as shown below, Now select Heads Viewer menu icon Rotate, Click Left & Right mouse buttons on the boundary lines of the Drawing Sheet, Click left mouse button on the Left bottom corner of the Drawing sheet to mark as rotation base point, move the mouse to rotate the Drawing sheet to get the orientation parallel to the part of the drawing where the Drawing sheet will be placed, 6
7 The rotated position of the Drawing sheet is shown below, Now select Heads Viewer menu icon Move, Click Left & Right mouse buttons on the boundary lines of the Drawing Sheet, move the mouse to shift the Drawing sheet to place on the desired part of the drawing, 7
8 The upper window of the Drawing sheet is properly placed on the desired part of the drawing, As the Drawing sheet is placed on the road section from Chainages and in the drawing, Now select Heads Viewer menu option Design>>Layout>>Accept, the details for the sheet laid out are written in file Layout.fil in the working folder, 8
9 Next again select Heads Viewer menu option Design>>Layout>>Apply, The Layout Dialog box will come as shown below, Enter Bottom Margin 210, Click on OK, The second Drawing Sheet is placed in the drawing, 9
10 Repeating the same procedure for Rotate & Move as before the second Drawing sheet is laid out on the road section from Chainages and in the drawing as shown below, Next select Heads Viewer menu option Design>>Layout>>Accept, the details for the second sheet laid out are written in file Layout.fil in the working folder, 10
11 The details of two laid out Drawing sheets are written in file Layout.FIL, which may be opened in Notepad as shown below, For each Drawing sheet the details are X,Y Coordinate of Left Bottom Corner, Angle of Rotation in degrees, Length of Drawing sheet, Width of Drawing sheet, Scale for drawing to fit in the Drawing sheet size, Bottom Margin, Right Margin, Top Margin & Left Margin. Here the Bottom Margin is 210mm and all the other Drawing sheet margins are 10mm, this is for keeping the space for Long Section or PROFILE drawing and the Title Block on the lower window part of the Drawing sheet. Now close the Heads Viewer without saving the drawing, if the drawing is saved then all the Chainage Marking lines & Drawing sheet lines will come in the next set of drawings, which are not desired in the drawings to be created next, Coming back to the HEADS Pro main screen click on button Finish, 11
12 If the message comes for opening the drawings, Click on button No, Using Heads Pro Menu Option File>>Open, Select file Project Data File2.txt and Click on Open, 12
13 The Project Work Space box comes with list process option for PLAN Drawing as mentioned in the Project Data File2.txt, Click on button Proceed, The Process starts and the Dialog Box comes and Click on button Proceed, when the process is over click on button OK & Finish, 13
14 Two Plan drawings are created as PLAN1.DXF & PLAN2.DXF (In Demo version PLAN1.DRG & PLAN2.DRG) inside folder Design Drawings within the working folder, following the two Drawing Sheet layouts as described in file Layout.FIL, Getting back to the Project Data process screen, Click on button Finish, Message may come as shown below, Click on button Yes to open the PLAN drawing in Heads Viewer, 14
15 The Drawing PLAN1.DXF (In Demo version PLAN1.DRG) is opened with Heads Viewer as selected from the list on the left side, as shown below, The Drawing PLAN2.DXF (In Demo version PLAN2.DRG) is opened with Heads Viewer as selected from the list on the left side, as shown below, 15
16 TECHSOFT ENGINEERING SERVICES 179, BANGUR AVENUE, BLOCK - A, KOLKATA TEL: , , dataflow@mail.com, techsoft@consultant.com WEB SITE: 16
HEADS Pro: The Simplest & Versatile software for Highway engg.&
HEADS Pro: The Simplest & Versatile software for Highway engg.& design with special features for low cost rual & hill roads, tunnels, road widening, strengthening, profile correction, pavement design,
More informationToothbrush Holder Project 2D Machining
Toothbrush Holder Project 2D Machining Prerequisite Toothbrush Holder drawn and saved as a DXF file in SolidWorks Focus of the Lesson On completion of this exercise you will have: Used the Techsoft 2D
More informationHow to use free DWG TrueView to work with AEC Apps
AEC Logic Pvt Ltd How to use free DWG TrueView to work with AEC Apps This document explains how to reach free download from Autodesk website and manage various 2D and 3D objects while converting FROM and
More informationminicad5 QuickStart Tutorial Stage: 4 Plot the Job
minicad5 QuickStart Tutorial Stage: 4 Plot the Job Aim: Plot the job to both printer / plotter and DXF file. Figure 1 - The finished product Plotting and export to DXF We wish to produce a final paper
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationTutorial 1 getting started with the CNCSimulator Pro
CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro
More informationTo apply proposed roadway data (vertical alignments, cross section template data, cut/fill slopes, etc.)
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Roadway Design Extracting Existing Ground Cross Sections This document
More informationIn this tutorial you will open a Dxf file and create the toolpath that cut the external of the part.
Tutorial 2 - Open Dxf file and create the outside Contour toolpath. In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part. Caution: CNC machines are potentially
More informationCreate all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
More informationModeling Basic Mechanical Components #1 Tie-Wrap Clip
Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationHow to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data Objectives Build a basic HEC-RAS
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationCreating Digital Stories for the Classroom
Using Photo Story 3 to Create a Digital Story Creating Digital Stories for the Classroom When you open Photo Story 3 you have a few options. To begin a new story select the option Begin a New Story and
More informationYou can easily print images using the Capture NX print function. Here we will explain the process for printing
Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationuiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT)
uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT) This tutorial covers how to record a Panopto video for your course. IN ORDER TO DO THIS, YOUR INSTRUCTOR MUST COMPLETE SEVERAL STEPS TO ALLOW
More informationLandscaping Tutorial
Landscaping Tutorial This tutorial describes how to use Home Designer Essentials s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,
More informationAlibre Design Exercise Manual Introduction to Sheet Metal Design
Alibre Design Exercise Manual Introduction to Sheet Metal Design Copyrights Information in this document is subject to change without notice. The software described in this documents is furnished under
More informationTable of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data v. 10.1 Objectives Build a basic HEC-RAS
More informationRecording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson
Recording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson In this tutorial we want to insure that your computer and Audacity will do the best recording job they can do
More informationAEC LOGIC Pvt Ltd. AEC CutFill. Step by Step Tutorial. Yudhishtirudu Gaddipati
AEC LOGIC Pvt Ltd AEC CutFill Step by Step Tutorial Yudhishtirudu Gaddipati 13 AEC CutFill-Step by Step Tutorial AEC CutFill Program AEC CutFill is a simple way to calculate earthwork volumes and print
More informationGEO/EVS 425/525 Unit 2 Composing a Map in Final Form
GEO/EVS 425/525 Unit 2 Composing a Map in Final Form The Map Composer is the main mechanism by which the final drafts of images are sent to the printer. Its use requires that images be readable within
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationVectorworks Architect Tutorial Manual by Jonathan Pickup. Sample
Vectorworks Architect Tutorial Manual by Jonathan Pickup Table of Contents Introduction...iii Step 1 Layer and Model Setup... 1 Document Setup...1 Layer Setup (Model Setup)...7 Step 2 Property Line...
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationArchitectural Design
Punch! Pro Dream House Project After completing the tutorial and scale drawing exercises the students will design their dream home using Professional Home Design program, Punch! Home Design. Using Professional
More informationUniversal Camera Registration User Guide for ILS 9.75 & 12.75
User Guide for ILS 9.75 & 12.75 www.ulsinc.com Overview Camera Registration allows the laser system to automate the alignment of a vector path with the material for the purpose of tightening process control
More informationTutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill).
Tutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill). In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part, another toolpath
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationLearning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:
Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationJ. La Favre Fusion 360 Lesson 5 April 24, 2017
In this lesson, you will create a funnel like the one in the illustration to the left. The main purpose of this lesson is to introduce you to the use of the Revolve tool. The Revolve tool is similar to
More informationminicad5 QuickStart Tutorial Stage: 3 Transform Field Data and Prepare for Printing
minicad5 QuickStart Tutorial Stage: 3 Transform Field Data and Prepare for Printing Aim: In this stage we will transform the field data, contour the natural surface, create a lot with annotated boundaries
More informationby Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual SAMPLE
kramdnal by Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual Table of Contents Introduction... iii Project 1: Landscape Area Analysis...1 Project 2: Quick Domestic
More informationLab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
More informationApplied Precast Concrete Detailing
Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation
More informationELE3310 Basic Electromagnetics Lab Session 1
ELE3310 Basic Electromagnetics Lab Session 1 Gao Xin By modifying CST MICROWAVE STUDIO 2006 tutorials Geometric Construction and Solver Settings Introduction and Model Dimensions In this tutorial you will
More informationEstimated Time Required to Complete: 45 minutes
Estimated Time Required to Complete: 45 minutes This is the first in a series of incremental skill building exercises which explore sheet metal punch ifeatures. Subsequent exercises will address: placing
More informationFloral Visions Pillow
Floral Visions Pillow Expanding Embroidery Possibilities with the BERNINA 830 & Embroidery Software 6 The BERNINA 830 has the tremendous capability of bringing ALL sewing and decorative stitches into embroidery
More informationVersion 8 Tutorial
Version 8 Tutorial 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector and PDF...
More informationPANalytical X pert Pro Gazing Incidence X-ray Reflectivity User Manual (Version: )
University of Minnesota College of Science and Engineering Characterization Facility PANalytical X pert Pro Gazing Incidence X-ray Reflectivity User Manual (Version: 2012.10.17) The following instructions
More informationAlibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
More informationTEMScripts Auto Image Measurement (Pattern) Manual. TEMScripts LLC. Last updated: 12/5/2016
TEMScripts Auto Image Measurement (Pattern) Manual TEMScripts LLC. Last updated: 2/5/206 Close Digital Micrograph TS EasyMetro Installation Copy following files to \\Gatan\DigitalMicrograph\PlugIns (normally
More informationEZIN HOBEKI Pipe Designer. Here is a little tutorial. Version 30/04/2010
Table of content Pipe Designer Here is a little tutorial. Version 30/04/2010 1 Step by step quick start...2 1.1 Step 1: Engine Parameters...2 1.2 Step 2: Pipe dimensions...2 1.3 Step 3: Shape designer...2
More informationThe operation manual of spotlight 300 IR microscope
The operation manual of spotlight 300 IR microscope Make sure there is no sample under the microscope and then click spotlight on the desktop to open the software. You can do imaging with the image mode
More informationCreating DXF Files. IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger
Creating DXF Files IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger 1. Convert a part to a dxf format When you save a part in Solidworks it is saved as a 3D solid model with all the relationships
More informationUNIT 11: Revolved and Extruded Shapes
UNIT 11: Revolved and Extruded Shapes In addition to basic geometric shapes and importing of three-dimensional STL files, SOLIDCast allows you to create three-dimensional shapes that are formed by revolving
More informationImaging Features Available in HTML5. it just makes sense
Imaging Features Available in HTML5 it just makes sense August, 2018 Imaging Features Available in HTML5 As part of the 5.2 SP1 release, the Images functionality is now available in HTML5 and provides
More informationTiling. 1. Overlapping tiles with fixed number of tiles. Tutorial
Tutorial Tiling Software version: Asanti 3.0 Document version: April 3, 2017 This tutorial demonstrates how to use tiling within Asanti. Download the Asanti Sample Files via the Asanti Client (Help > Asanti
More informationDrawing Layouts Paper space & Model Space
Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they
More informationCreo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
More informationRICOH Stereo Camera Software R-Stereo-GigE-Calibration
RICOH Stereo Camera Software R-Stereo-GigE-Calibration User's Guide RICOH Industrial Solutions Inc. 1/18 Contents 1. FUNCTION OVERVIEW... 3 1.1 Operating Environment... 3 2. OPERATING PROCEDURES... 4 3.
More informationLandscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan
Landscaping Tutorial This tutorial describes how to use Home Designer Pro s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features, and how
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationFoamWorks Introduction. David Mrozinski 848 W. Borton Road Essexville, Michigan 48732
FoamWorks 4.0 Introduction Quick Start Registration Registration Menus Files Save a Cut Profile Load a Cut Profile Close Profile/G-code Restore Default Cut Profile Exit Setup Setup Parameters Generate
More informationBatch Processing Converting images in a folder to JPEG
Batch Processing Converting images in a folder to JPEG Request I would like to convert multiple RAW images (NEF files) to JPEG images all at once Response You can use a Batch Process to convert all RAW
More informationAn Introduction to Lasercut 5.3 Preparing the Artwork
An Introduction to Lasercut 5.3 Preparing the Artwork Version 0.1, December 8th 2015 Precautions Introduction Importing from.dxf Setting up the layers Checking the Operations Tips, Mistakes and Problems
More information2. Creating and using tiles in Cyberboard
2. Creating and using tiles in Cyberboard I decided to add some more detail to the first hexed grip map that I produced (Demo1) using the Cyberboard Design program. To do this I opened program by clicking
More informationSolidWorks Tutorial 1. Axis
SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to
More informationModule 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece
1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a
More informationCreate A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc
Create A Mug Skills Learned Settings Sketching 3-D Features Slice Line Tool Offset Arc Revolve Offset Plane Sweep Fillet Decal* Tutorial: Creating A Custom Mug There are somethings in this world that have
More informationDrawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.
Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the
More informationGAME PROGRAMMING & DESIGN LAB 1 Egg Catcher - a simple SCRATCH game
I. BACKGROUND 1.Introduction: GAME PROGRAMMING & DESIGN LAB 1 Egg Catcher - a simple SCRATCH game We have talked about the programming languages and discussed popular programming paradigms. We discussed
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationTOY TRUCK. Figure 1. Orthographic projections of project.
TOY TRUCK Prepared by: Harry Hawkins The following project is of a small, wooden toy truck. This exercise will provide you with the procedure for constructing the various parts of the design then assembling
More informationACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
More informationTeledyne PDS. Monopile Placement - Laser scan position. Version March 2017
Monopile Placement - Laser scan position Teledyne PDS Version 2.3.1 March 2017 Teledyne RESON B.V. Stuttgartstraat 42-44 3047 AS Rotterdam The Netherlands Tel.: +31 (0)10 245 15 00 www.teledyne-reson.com
More informationGoogle Earth Workshop Version 5
Google Earth Workshop Version 5 From the Mitchell Home Page (http://mitchell.needham.k12.ma.us) Technology > For Teachers > Prof Dev > Google Earth Getting to Know Google Earth Taken from Google Earth
More informationImport/Export of tendons in module StatiCa Tendon
IDEA Tutorial Import/Export of tendons in module StatiCa Tendon by using formats DXF, TXT and table format Import/Export of tendons in module StatiCa Tendon 1 Contents 1. Terminology... 2 2. Import...
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationThe ShopBot Indexer. Contents
ShopBot Indexer Page -1- The ShopBot Indexer The ShopBot Indexer is basically a lathe with an extra level of precision built in you can precisely control the rotation of the headstock and also link it
More informationTo start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
More informationSMALL OFFICE TUTORIAL
SMALL OFFICE TUTORIAL in this lesson you will get a down and dirty overview of the functionality of Revit Architecture. The very basics of creating walls, doors, windows, roofs, annotations and dimensioning.
More informationHow to use the scatter module in SMS to add breaklines to a scatter dataset in order to control the shape of the surface.
v. 13.0 SMS 13.0 Tutorial Objectives How to use the scatter module in SMS to add breaklines to a scatter dataset in order to control the shape of the surface. Prerequisites SMS Overview Scatter Data Import
More informationVirtual Painter 4 Getting Started Guide
Table of Contents What is Virtual Painter?...1 Seeing is Believing...1 About this Guide...4 System Requirements...5 Installing Virtual Painter 4...5 Registering Your Software...7 Getting Help and Technical
More informationIn this tutorial you will open a Dxf file and create the toolpath to remove the material contained in a closed profile.
Tutorial 3 - Open Dxf file and create the Pocket toolpath. In this tutorial you will open a Dxf file and create the toolpath to remove the material contained in a closed profile. Caution: CNC machines
More informationDrawing a Plan of a Paper Airplane. Open a Plan of a Paper Airplane
Inventor 2014 Paper Airplane Drawing a Plan of a Paper Airplane In this activity, you ll create a 2D layout of a paper airplane. Please follow these directions carefully. When you have a question, reread
More informationlindab comfort Step by step manual DIMcomfort 4.0
Step by step manual DIMcomfort 4.0 1 Contents Start-up DIMcomfort 4.0 3 Room Setup 4 Room information 4 Dimensions 5 Comfort zone 6 Dimension criteria 7 Selection of air terminal devices 8 Product search
More informationGoogle Earth for Surveyors PLSO Conference January 21, Bill Clark Earth Point
Google Earth for Surveyors PLSO Conference January 21, 2015 Bill Clark Earth Point Introduction Bill Clark, developer of Earth Point www.earthpoint.us bill.clark@earthpoint.us 208.860.6311 Notes These
More informationVersion 9 Tutorial and User Guide
Version 9 Tutorial and User Guide 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationRoom 2D/3D Diagram Demo
Room 2D/3D Diagram Demo PART 1) Basic Room Layout (2D) 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud
More informationLandscaping Tutorial
Landscaping Tutorial This tutorial describes how to use Home Designer Architectural s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,
More informationThere are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
More informationCreating Nice 2D-Diagrams
UseCase.0046 Creating Nice 2D-Diagrams Keywords: 2D view, z=f(x,y), axis, axes, bitmap, mesh, contour, plot, font size, color lookup table, presentation Description This use case demonstrates how to configure
More informationSiemens NX11 tutorials. The angled part
Siemens NX11 tutorials The angled part Adaptation to NX 11 from notes from a seminar Drive-to-trial organized by IBM and GDTech. This tutorial will help you design the mechanical presented in the figure
More informationLandscaping Tutorial. Chapter 5:
Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information
More informationARC HYDRO GROUNDWATER TUTORIALS
ARC HYDRO GROUNDWATER TUTORIALS Subsurface Analyst Creating ArcMap cross sections from existing cross section images Arc Hydro Groundwater (AHGW) is a geodatabase design for representing groundwater datasets
More informationCAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
More informationThree Steps to Dynamic View for BIM Applications
Three Steps to Dynamic View for BIM Applications The process of creating and using dynamic views can seem daunting to even the most experienced user. The Bentley BIM applications provide tools to somewhat
More informationVersion SmartPTT Enterprise. Web Client User Guide
Version 9.3.1 July 2018 Contents Contents 1 Introduction 3 2 SmartPTT Web Client Interface 4 3 Logging in and Changing User 6 4 7 4.1 Making and Receiving Voice Calls 8 4.2 Sending Messages 11 4.3 Finding
More informationGIMP WEB 2.0 ICONS. Web 2.0 Icons: Paperclip Completed Project
GIMP WEB 2.0 ICONS WEB 2.0 ICONS: PAPERCLIP OPEN GIMP or Web 2.0 Icons: Paperclip Completed Project Step 1: To begin a new GIMP project, from the Menu Bar, select File New. At the Create a New Image dialog
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationExample Application C H A P T E R 4. Contents
C H A P T E R 4 Example Application This chapter provides an example application of how to perform steady flow water surface profile calculations with HEC-RAS. The user is taken through a step-by-step
More information