A Full Line of Pipe Products for Any Application
|
|
- Barrie Pope
- 6 years ago
- Views:
Transcription
1 Standard Pipe
2 SureThread and ERW: Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic, full-line producer of continuous weld (CW) and electric resistance weld (ERW) ¼ to 12 pipe today. Wheatland is also a worldwide leader in hot-dip galvanization technology. ¼ to 12 nominal sizes produced ⅛ to 12 sizes stocked in a variety of ASTM standards Standard hot-dip galvanization to ASTM A53 requirements 350 combinations of finish, end treatments and lengths A Full Line of Pipe Products for Any Application Wheatland produces pipe of ¼ to 12 nominal sizes and stocks ⅛ to 12 pipe sizes in a variety of ASTM standards. SureThread (ASTM A53) and ERW are used for mechanical and pressure applications, and for ordinary uses in steam, water, gas and air lines. More than 350 different combinations of finish, end treatments and lengths are available on standard pipe. Our standard process is hot-dip galvanization to the ASTM A53 requirements. Surface finishes include black, passivate, galvanized, uncoated, pickled, pickled and oiled, bare and soluble oil. End finishes include plain-end, roll groove, cut groove, threaded and coupled, and threads only (one or both ends). Documented Quality Assurance Wheatland facilities have quality systems in place and are registered to ISO 9001:2008 Quality Management Systems at minimum. Strategically located in the U.S., we carry a large inventory and can ship quickly to meet your tight delivery schedules. For more information, call or visit wheatland.com
3 A53 Electric Resistance Weld Pipe, Type E, Grade B Suitable for welding, threading and grooving Finish options: Black and hot-dip galvanized Sizes: Schedule 40, 2 12 Produced to ASTM A53 / 53M, federal specification WW-P404 and ASME B36.10M ASTM A53 TYPE E WEIGHTS AND DIMENSIONS TRADE SIZE OD NOMINAL WALL THICKNESS WEIGHT in. in. lbs. / ft / HYDROSTATIC AND NON-DESTRUCTIVE ELECTRIC TESTING Hydrostatic inspection test pressures for plain-end pipe are listed in Table X 2.2 of the A53 / A53M industry specification. Test pressures are maintained for a minimum of five seconds. Non-destructive electric testing of the weld seam is required on each length of ERW pipe NPS 2 and larger. TENSILE REQUIREMENTS TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN. 60,000 psi 35,000 psi BENDING TEST (COLD) DEGREE OF BEND DIAMETER OF MANDREL 90 12x pipe OD
4 The continuous weld process creates a uniform grain structure to make bending, cutting and threading easier Ideal for applications with frequent threading, grooving and bending requirements Finish options: Black, passivate, bare, pickled and oiled, and hot-dip galvanized Sizes: ¼ to 4 Standard and extra heavy Produced to ASTM A53A 53M, federal specification WW-P404 and ASME B36.10M ASTM A53 TYPE F WEIGHTS AND DIMENSIONS TRADE SIZE OD SCHEDULE 40 SCHEDULE 80 in. WalI Inches Weight lbs. / ft. Wall Inches Weight lbs. / ft. 1/ / / / / / / / TENSILE REQUIREMENTS TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN. ELONGATION IN 2 48,000 psi 30,000 psi Refer to A53 table x 4.1, latest revisions ASTM A53 / A53M TEST PRESSURES (GRADE A) NOMINAL SIZE 1/4 1/2 3/4 TEST PRESSURE (psi) 700 psi 700 psi 700 psi BENDING TEST (Less than NPS 2) DEGREE OF BEND DIAMETER OF MANDREL Standard 90 12x pipe OD Close Coiling 90 8x pipe OD psi 1 1/ psi 1 1/ psi psi 2 1/ psi FLATTENING TEST NPS 2 AND GREATER To test the quality of the weld, we position the weld at 90 from the direction of force and flatten until the OD is ¾ of the original outside diameter. No cracks should occur along the inside or outside surface of the weld psi 3 1/ psi psi
5 STANDARD PIPE SCHEDULE 40 ASTM A53 GRADES A AND B TRADE SIZE DN DESIGNATOR OD ID WALL THICKNESS in. mm in. mm in. mm (lbs. / ft.) NOMINAL WEIGHT (MASS) PER UNIT LENGTH (kg / m) Couplings (lbs. / ft.) Couplings (kg / m) 1/ / / / / / / / / EXTRA-HEAVY PIPE SCHEDULE 80 ASTM A53 TYPE F, GRADE A TRADE SIZE DN DESIGNATOR OD ID WALL THICKNESS in. mm in. mm in. mm (lbs. / ft.) NOMINAL WEIGHT (MASS) PER UNIT LENGTH (kg / m) Couplings (lbs. / ft.) Couplings (kg / m) 1/ / / / / / / / / PERMISSIBLE VARIATIONS ASTM A53 GRADES A AND B PIPE Outside Diameter Mechanical Properties Grade A: Yield 30,000 [205 MPa] psi minimum; Tensile 48,000 psi [330 MPa] minimum Grade B: Yield 35,000 [240 MPa] psi minimum; Tensile 60,000 psi [415 MPa] minimum OD OVER UNDER NPS ⅛ to 1 1/2; DN 6 to 40 1/64 (0.4mm) 1/64 (0.4mm) NPS 2 and up; DN 50 and up 1% 1% Wall Thickness at Any Point 12.5% Weight 10% 10%
6 700 South Dock Street Sharon, PA wheatland.com Corporate Office 227 West Monroe Street 26th Floor Chicago, IL jmcsteelgroup.com About Wheatland Tube Standard Pipe Wheatland Tube produces a full line of standard pipe SureThread and ERW pipe, lance pipe and seamless pressure pipe. We re the industry leader in hot-dip galvanized pipe, and we offer more than 350 different combinations of finish, end treatments and length on our standard pipe. All Wheatland manufacturing locations quality management systems are certified to ISO 9001:2008 requirements. For more information, contact Wheatland Tube at: or info@wheatland.com Or, visit our website at wheatland.com The Strength to Deliver SP
A Full Line of Pipe Products for Any Application
Standard Pipe Standard Pipe: SureThread and ERW Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic,
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationSteel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142
PRODUCT SPECIFICATIONS Welded steel pipe nipples both galvanized an dblack in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. TECHNICAL SPECIFICATIONS Standards:
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
More informationActivating Your Ideas. In Stainless Steel Pipe
Activating Your Ideas In Stainless Steel Pipe Applications Outokumpu produces austenitic and duplex pipe products from small diameter pipe to large diameter, heavy wall pipe, with thicknesses up to 2 on
More informationPage 1 of 12 Second Revision No. 5-NFPA 12-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C 700, West Conshohocken, PA 19428-2959. ASTM A53, Standard
More informationTechnical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).
IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationSUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
"BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,
More informationSSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING
SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING If other steel doesn t behave to perfection, try SSAB Laser. It has guaranteed flatness both before and after cutting. SSAB LASER THE ULTIMATE CHOICE FOR
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationCall Today for a Free Quote! Immediate Availability. Inexpensive Delivery.
Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery. ASTM A606-4 / A588 / A847 (AKA CORTEN ) STRUCTURAL COMPONENTS FLAT SHEETS, FLAT BAR, PLATE, COIL, RECTANGULAR TUBE, SQUARE TUBE,
More informationStandard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
More informationGOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationAllentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationWoven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationElcometer Conical Mandrel Bend Tester
English Elcometer 1510 Conical Mandrel Bend Tester Operating Instructions English is a registered trademark of Elcometer Instruments Ltd. All other trademarks acknowledged. Copyright Elcometer Instruments
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:
More informationNTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges
NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationROUND STEEL POLE STRAIGHT
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a
More informationJIS G3465 Seamless Steel Tubes for Drilling
JIS G3465 Seamless Steel Tubes for Drilling 1. Scope This Japanese Industrial Standard specifies the seamless steel tubes, hereinafter referred to as the "tubes", used for casing tube, core tube and drill
More informationMB Commercial High Carbon Spring Wire
MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where
More informationA representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
More informationPRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends
PRODUCT CATALOGUE Pipestar now offering full-line of flanged Arcbends Pipestar offers a range of seamless long radius Arc HDPE sweep bends made to the highest quality standards. Pipestar offers a range
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationLEGACY 440 FENCING. 62 Premium Products, Premium Service... Direct to Your Door.
LEGACY 440 FENCING There are multitudes of fencing choices on the market today and each has a specific purpose. These choices are narrowed by the intended use of the fence and the choice becomes further
More informationTHE IMPORTANCE OF THE FITTING
JOHNSON RISER PIPES Geometrical characteristics (diameter, depth), pump pressure and water quality are the principal factors determining the choice of the riser pipe and the fitting type. These choices
More informationStandard Specification for Carbon and Alloy Steel Nuts [Metric] 1
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
More informationContent. Hot-dip galvanized narrow strip. Areas of application. Product information
Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing
More informationCWM. Agricultural, Commercial, Industrial Product Brochure.
CWM Agricultural, Commercial, Industrial Product Brochure 1688 West 75 th Avenue Vancouver, BC V6P 6G2 Canada Canada Wire & Metal Inc is a Canadian based entity that was founded in 1994. We have been serving
More informationEnglish version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples
More informationHEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationStandard Specification for Copper-Clad Steel Wire for Electronic Application 1
Designation: B 45 0 Standard Specification for Copper-Clad Steel Wire for Electronic Application 1 This standard is issued under the fixed designation B 45; the number immediately following the designation
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationSQUARE STEEL POLE STRAIGHT
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 8 SQUARE STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with
More informationPRODUCT CATALOGUE. Welded Carbon Steel Pipe
Welded Carbon Steel Pipe FOR WATER BORE AND GENERAL DRILLING APPLICATIONS PRODUCT CATALOGUE Water Bore Casing to Australian Standard AS 1396 General Drilling Casing in Accordance with J.55 Grade and API
More informationTechnical Information Smartec CLD18
TI01080C/07/EN/02.14 71264779 Products Solutions Services Technical Information Smartec CLD18 Compact inductive conductivity measurement for the food and beverage industry Application Compact measuring
More information11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014
74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)
More information!"# $%& '()*(+%,-. /#--) 0"+.1%# --- บร ษ ท เอ นไซ กร ป จ าก ด ---
!"# $%& '()*(+%,-. /#--) 0"+.1%# w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- Product Specification *Weights and Dimensions
More informationSECTION TRAFFIC SIGNAGE
SECTION 10 14 53 TRAFFIC SIGNAGE PART 1 - GENERAL 1.01 SECTION INCLUDES A. Furnishing and installing roadside traffic signage. B. Providing additional traffic signs as required in Sections 01 55 28 Controlling
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-MG-501-02 STANDARD TEST METHOD FOR INWARD BUCKLING OF SPIRAL-WOUND GASKETS 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone: (610) 971-4850
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More information012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationCH # 8. Two rectangular metal pieces, the aim is to join them
CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationSuflex Astra 703/105. Features. Product Description. Suggested Applications VW-1 Rated Mechanical Tubing
VW-1 Rated Mechanical Tubing Temp Class: Class A (105 C) Grades Available: C Material: Polyvinylchloride Tubing Sizes Available: AWG #24 through 2-1/2" I.D. Colors Available: Clear, Black Applicable Standards:
More informationDesignation: F
Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationSprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E".
Product Name Nordic Flow FM Thin Wall Pipes Application Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E". Manufacturing Standard
More informationStandard Specification for High-Strength Steel Bolts, Classes 10.9 and , for Structural Steel Joints [Metric] 1
Designation: METRIC Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 490M; the
More informationYour Global Sales Partner
Your Global Sales Partner www.techlineint.com THE TECHLINE COMMITMENT As a leader in global sourcing since 1982, we are dedicated to placing the world s manufacturing capabilities within the grasp of our
More informationWIRE CLOTH. PRODUCT CATALOG ISO 9001:2008 Certified
WIRE CLOTH PRODUCT CATALOG info@directmetals.com ISO 9001:2008 Certified table of contents SAFETY GRATING wire cloth WE LL CUT ANYTHING IN OUR INVENTORY TO YOUR SPECS! Terminology... 1 Fabricated Filters...
More informationMidwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
More informationI-W07/W77. Couplings DETAIL A WARNING. Photo Showing Pipe with Weld Seam Ground 6 inches/152 mm Back from Pipe End and an AGS Groove
WARNING Read and understand all instructions before attempting to install any Victaulic piping products. These products must be used only on pipe that is prepared to Victaulic Advanced Groove System (AGS)
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationWIRELINE RODS CARE AND HANDLING
WIRELINE RODS CARE AND HANDLING Drilling companies constantly need to achieve greater depths, while machines are increasingly more powerful and faster. Heat treatment applied to rod ends, enhances their
More informationOUR QUALITY POLICY VISION MISSION
AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationRR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST METAL (CHAIN-LINK FENCE FABRIC) (DETAIL SPECIFICATION) This Federal Specification is approved
More informationDrawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
More informationBalaji THE COMPANY MISSION
82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY
More informationContents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.
Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger
More informationSECTION CHAIN LINK FENCING AND GATES
PART 1 GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish and install all materials, labor, equipment and incidentals required to provide chain link fencing and gates as Shown on the Contract Drawings
More informationSURFACE VEHICLE STANDARD
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J429 Issued 1949-01 Revised 1999-01 REV. JAN1999 Submitted for recognition as an American National Standard Superseding J429 MAY1998
More informationVolume II: Xirtec 140 PVC Corzan Dimensional Data & Weights
Volume II: Xirtec 140 PVC & CPVC Corzan Dimensional Data & Weights Industrial Technical Manual Series T H I R D E D I T I O N IPEX XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights IPEX Xirtec
More information001: 2007 CEB STANDARD
001: 2007 CEB STANDARD ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEYLON ELECTRICITY BOARD SRI LANKA Specification for ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEB Standard 001: 2007 CEYLON ELECTRICITY
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationBRAZING PROCEDURE SPECIFICATION NO
NATIONAL CERTIFIED PIPE WELDING BUREAU BRAZING PROCEDURE SPECIFICATION NO. 107-1 FOR TORCH BRAZING OF ALLOYS 102, 120, 122, 142, 192 OF TUBE, VALVES, FITTING AND FLANGES USING BcuP-3 THROUGH-7 FILLER METALS
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationCERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE
12770 Rue Brault, Mirabel QC, J7J 1P3 Sans Frais / Toll Free 1 888 657.2203 Tel. : 450 420.1839 Fax : 450 420.3882 mtr@boulonsplus.net www.boulonsplus.net CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE SVP
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationConvex Strainers DN PN 80, 100, 200
55 Convex Strainers DN 400-1000 PN 80, 100, 200 Designed for protection of compressor rotor bundle against foreign-object damage. Working medium is non-aggressive natural gas and other non-aggressive media
More informationCOMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS)
INCH-POUND 30 May 2002 SUPERSEDING A-A-55804 11 March 1996 COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS) The General Services Administration has authorized the use of this commercial item
More informationSECTION CUSTOM FABRICATED EQUIPMENT
SECTION 11401 CUSTOM FABRICATED EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 05500 - Metal Fabrications. 2. 10100 - Chalkboards, Markerboards, Tackboards, and Bulletin Board Cabinets.
More informationDRAWN SEAMLESS ALUMINUM TUBE CAPABILITIES
H A R D A L L Y T U B E & P I P E DRAWN SEAMLESS ALUMINUM TUBE CAPABILITIES STANDARD ALLYS & TEMPERS 3003 6061 6063 00 06 K49A T3 H H32 T4 T31 H14 H34 T32 T6 T6 T3 STANDARD ALLYS & SPECIFICATINS* 3003
More informationSECTION ELECTRICAL IDENTIFICATION
SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationLCSF Low Clearance Split Frame
Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs
More informationWire Drawing 7.1 Introduction: stock size
Wire Drawing 7.1 Introduction: In drawing, the cross section of a long rod or wire is reduced or changed by pulling (hence the term drawing) it through a die called a draw die (Fig. 7.1). Thus, the difference
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More information