OD TURNING HOLDERS-MCLNR/L, ACLNR/L MADE IN THE. Right Hand Model. Left Hand. Model. Increase Insert Life!
|
|
- Sherilyn Glenn
- 6 years ago
- Views:
Transcription
1 HUK JWS LTHE WORKHOLDING OD TURNING HOLDERS-MLNR/L, LNR/L OD TURNING TOOLHOLDER INDEX MDE IN THE US MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD MLNR/L - Side & End utting Offset Using NMG, NM, NG_ & NM_ type inserts TO-LNR12-3 TO-LNR16-3 TO-LNR12-4 TO-LNR16-4 -Type Toolholders LNR/L NMG Inserts on Pages OL MLNR/L-124 3/4 SQ TH-110 TH-210 $7.4 NMG-43 MLNR/L SQ TH-1110 TH-2110 $4.32 NMG-43 MLNR/L-164D 1 SQ 6 TH-111 TH-211 $4.32 NMG-43 MLNR/L-204D 1-1/4 SQ 6 TH-1120 TH-2120 $9.67 NMG-43 MLNR/L-84D 1 X 1-1/4 6 TH-112 TH-212 $71.60 NMG-43 NMG Inserts on Pages TO-LNL12-3 TO-LNL16-3 TO-LNL12-4 TO-LNL16-4 b h h1 l1 f pplicable Insert N 32 _ N 32 _ N 43 _ N 43 _ TO-ELS32 TO-ELS32 TO-LS42 $.42 TO-LS42 $ Master atalog OD Toolholder Index Holder Type Page # MLNR/L 314 MRNR/L 31 MDPNN 31 MSDNN 31 MDJNR/L 316 MTNR/L 316 MTENNS 317 MTFNR/L 317 MTGNR/L 317 EXTR HRDWRE ISN-433 ISN-433 ISN-433 ISN-433 ISN-433 TO-P3 TO-P3 TO-P4 TO-P4 Holder Type Page # MTJNRS/L 318 MVJNR/L 318 MWLNR/L 319 SLR/L 319 SDJR/L 320 SSDN 320 SVJR/L 320 SWLR/L 320 MIRO 100 RIDE 322 L-20 L-20 L-20 L-20 L-20 TO-S3 TO-S3 TO-S4 TO-S4 MDE IN THE US Wrench
2 OD TURNING HOLDERS-MLNR/L, MDPNN, MSDNN MRNR/L 1 Side utting, Offset Using NMG, NM, NG_ & NM_ type inserts MDE IN THE US LTHE HUKS LIVE ENTERS MDPNN 27. Side utting Straight Using DNMG, DNM, DNG_ & DNM_ type inserts NMG Inserts on Pages OL Price Uses Inserts MRNR/L-124 3/4 SQ TH-1130 TH-2130 $1.06 NMG-43 MRNR/L-164D 1 SQ 6 TH-113 TH-213 $4.32 NMG-43 MRNR/L-16D 1 SQ 6 TH-1140 TH-2140 $6.19 NMG-4 MRNR/L-20D 1-1/4 SQ 6 TH-114 TH-214 $71.60 NMG-4 DNMG Inserts on Pages 327 OL Neutral Hand EXTR HRDWRE ISN-433 ISN-433 ISN-33 $3.38 ISN-33 $3.38 MDPNN-164D 1 SQ 6 TH-1170 $81.04 DNMG-43 MDPNN-16D 1 SQ 6 TH-117 $97.2 DNMG-4 MDPNN-204D 1-1/4 SQ 6 TH-1180 $89.74 DNMG-43 MDPNN-20D 1-1/4 SQ 6 TH-118 $ DNMG-4 MDPNN-8D 1 X 1-1/4 6 TH-1190 $97.2 DNMG-4 IDSN-33 $3.80 IDSN-33 $3.80 IDSN-33 $3.80 EXTR HRDWRE L-12 L-12 L-12 L-12 XNS-8 XNS-8 MDE IN THE US VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS RIDE INSERTS THREDING/GROOVING MSDNN 4 Side utting Straight Using SNMG, SNG, SNM & SNM_ type inserts SNMG Inserts on Pages 329 OL Neutral Hand MSDNN-103 /8 SQ TH-119 $44.87 SNMG-33 MSDNN-123 3/4 SQ TH-1200 $1.06 SNMG-33 MSDNN-124 3/4 SQ TH-120 $1.06 SNMG-43 MSDNN-164D 1 SQ 6 TH-1210 $4.32 SNMG-43 MSDNN-16D 1 SQ 6 TH-121 $6.19 SNMG-4 ISSN-322 $1.70 ISSN-322 $1.70 ISSN-433 $2.70 ISSN-433 $2.70 ISSN-33 $3.20 EXTR HRDWRE NL-34 NL-34 MDE IN THE US L Master atalog 31 UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE
3 HUK JWS LTHE WORKHOLDING OD TURNING HOLDERS-MDJNR/L, DJNR/L & MTNR/L MDJNR/L -3 Side utting Offset Using DNMG, DNM, DNG_ & DNM_ type inserts MDE IN THE US MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS DNMG Inserts on Pages 327 -TYPE TOOLHOLDERS DJNR/L OL MDJNR/L-124 3/4 SQ TH-110 TH-210 $79.14 DNMG-43 MDJNR/L-164D 1 SQ 6 TH-11 TH-21 $6.16 DNMG-43 MDJNR/L-204D 1-1/4 SQ 6 TH-1160 TH-2160 $89.74 DNMG-43 MDJNR/L-84D 1 X 1-1/4 6 TH-116 TH-216 $97.2 DNMG-43 Quick hange EXTR HRDWRE L-20 L-20 L-20 INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DNMG Inserts on Pages 327 TO-DJNR12-3 TO-DJNR16-3 TO-DJNR12-4 TO-DJNR16-4 MTNR/L TO-DJNL12-3 TO-DJNL16-3 TO-DJNL12-4 TO-DJNL Side utting Straight Using TNMG, TNMP, TNG_ b h h1 r1 f pplicable Insert DN 33 _ DN 33 _ DN 43 _ DN 43 _ TO-ELSD32 TO-ELSD32 TO-LSD42 $7.26 TO-LSD42 $ Master atalog OL MTNR/L-123 3/4 SQ 4 TH-1220 TH-2220 $1.06 TNMG-33 MTNR/L-164D 1 SQ 6 TH-122 TH-222 $4.32 TNMG-43 TO-PS3 N/ TO-PS3 N/ TO-P4 TO-P4 TO-S3 TO-S3 TO-S4 TO-S4 EXTR HRDWRE ITSN-322 MDE IN THE US NL-34 Wrench
4 OD TURNING HOLDERS-MTENNS, MTFNR/L, MTGNR/L MTENN 30 Side utting Straight Using TNMG, TNM, TNG_ MTFNR/L 0 End utting Solid Steel ar Using TNMG, TNM, TNG_ OL Neutral Hand MTENN-103 /8 SQ 4 TH-1230 $44.87 TNMG-33 MTENN-123 3/4 SQ 4 TH-123 $1.06 TNMG-33 MTENN-124 3/4 SQ 4 TH-1240 $1.06 TNMG-43 MTENN-164D 1 SQ 6 TH-124 $4.32 TNMG-43 MTENN-83 1 x 1-1/4 6 TH-120 $48.40 TNMG-33 MDE IN THE US EXTR HRDWRE MDE IN THE US $).74 LTHE HUKS LIVE ENTERS VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS MTGNR/L 0 Side utting Offset Using TNMG, TNM, TNG_ OL MTFNR/L-123 3/4 SQ TH-12 TH-22 $1.06 TNMG-33 MTFNR/L SQ TH-1260 TH-2260 $4.32 TNMG-33 MTFNR/L-164D 1 SQ 6 TH-126 TH-226 $4.32 TNMG-43 OL EXTR HRDWRE MTGNR/L-123 3/4 SQ TH-1270 TH-2270 $1.06 TNMG-33 MTGNR/L SQ TH-127 TH-227 $4.32 TNMG-33 MTGNR/L-164D 1 SQ 6 TH-1280 TH-2280 $4.32 TNMG-43 EXTR HRDWRE MDE IN THE US Master atalog 317 RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE
5 HUK JWS LTHE WORKHOLDING MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS OD TURNING HOLDERS-TGNR/L, MTJNR/L, MVJNR/L -Type Toolholders TGNR/L TO-TGNR12-3 TO-TGNR16-3 TO-TGNR16-4 MTJNR/L -3 Side utting Offset Using TNMG, TNM, TNG_ TO-TGNL12-3 TO-TGNL16-3 TO-TGNL16-4 b h h1 r1 f Quick hange pplicable Insert 1 TN 33 _ TN 33 _ TN 43 _ TO-LST317 $.00 TO-LST317 $.00 TO-LST42 $7.14 TO-P-4 TO-P3 TO-P3 TO-P4 MDE IN THE US EXTR HRDWRE TO-S3 TO-S3 TO-S4 Wrench INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD MVJNR/L -3 Side utting Offset Using VNMG, VNM, VNG_ & VNM_ type inserts Master atalog OL MTJNR/L-123 3/4 SQ TH-128 TH-228 $1.06 TNMG-33 MTJNR/L-164D 1 SQ 6 TH-1290 TH-2290 $4.32 TNMG-43 MTJNR/L-204D 1-1/4 SQ 7 TH-129 TH-229 $9.67 TNMG-43 VNMG Inserts on Page 329 OL MVJNR/L-123 3/4 SQ TH-1300 TH-2300 $83.49 VNMG-33 MVJNR/L SQ TH-130 TH-230 $8.11 VNMG-33 MVJNR/L-164D 1 SQ 6 TH-1310 TH-2310 $8.11 VNMG-43 MVJNR/L-203D 1-1/4 SQ 6 TH-131 TH-231 $94.37 VNMG-33 MVJNR/L-204D 1-1/4 SQ 6 TH-1320 TH-2320 $7.87 VNMG-43 EXTR HRDWRE IVSN-323 $2.24 IVSN-323 $2.24 IVSN-433 IVSN-323 $2.24 IVSN-433 MDE IN THE US L-30 L-30 L-30 L-30 L-30
6 OD TURNING HOLDERS-MWLNR/L, WLNR/L MWLNR/L - Side & End utting Offset Using WNGG, WNM, & WNMG type inserts WNMG Inserts on Pages 330 -TYPE TOOLHOLDERS WLNR/L OL MWLNR/L-123 3/4 SQ TH-132 TH-232 $1.06 WNMG-33 MWLNR/L-124 3/4 SQ TH-1330 TH-2330 $1.06 WNMG-43 MWLNR/L SQ 6 TH-133 TH-233 $4.32 WNMG-33 MWLNR/L-164D 1 SQ 6 TH-1340 TH-2340 $4.32 WNMG-43 MWLNR/L-204D 1-1/4 SQ 6 TH-130 TH-230 $9.67 WNMG-43 Quick hange EXTR HRDWRE IWSN-323 $2.2 IWSN-433 $3.40 IWSN-323 $2.2 IWSN-433 $3.40 IWSN-433 $3.40 MDE IN THE US LTHE HUKS LIVE ENTERS VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS WNMG Inserts on Pages 330 b h h1 r1 f SLR/L - Side & End utting, Offset 7 Relief ngle, S- Using MT type inserts TO-WLNR12-3 TO-WLNR16-3 TO-WLNR12-4 TO-WLNR16-4 For MT Inserts, Please See Page 331 OL TO-WLNL12-3 TO-WLNL16-3 TO-WLNL12-4 TO-WLNL16-4 F pplicable Inserts WN 33 _ WN 33 _ WN 43 _ WN 43 _ TO-LSW312 $8.9 TO-LSW312 $8.9 TO-LSW42 $9.18 TO-LSW42 $9.18 Wrench TO-P3 TO-P3 TO-P4 TO-P4 TO-S3 TO-S3 TO-S4 TO-S4 Price Uses Inserts MDE IN THE US Master atalog 319 Torx Key Insert SLR/L L06-2J 3/8 SQ TH-10 TH-20 $43.43 MT-21. T-7 TS-2.4-6M1 SLR/L L08-3 1/2 SQ TH-110 TH-210 $43.43 MT-32. T-1 TS M1 SLR/L L10-3 /8 SQ TH-11 TH-21 $44.4 MT-32. T-1 TS M1 SLR/L L12-3 3/4 SQ TH-120 TH-220 $2.86 MT-32. T-1 TS M1 SLR/L L16-3D 1 SQ TH-12 TH-22 $6.34 MT-32. T-1 TS M1 RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE
RETENTION KNOBS/PULL STUDS
RETENTION KNOS/PULL STUDS LIVE ENTERS LTHE HUKS MDE IN THE US QUNTITY DISOUNTS FOR END USERS! uy 0 or more of any retention knob and receive a 0% Discount! VISE ESSORIES VISE WS We offer arguably the largest
More informationTool holders - Turning & Milling
Tool holders - Turning & Milling G167 G168 Notes MCKN - Negative Toolholder Part No. Shank CNM_ Description R.H. L.H. Size Gage Insert Price MCKNR/L12-4B 50066 50067 0.750 432 $95.09 MCKNR/L16-4C 50070
More informationCOBALT Part Number. Price Each
OMINED DRILL & OUNTERSINKS OMINED DRILL & OUNTERSINKS PLAIN TYPE-60, 82 and 90 Included Angle Used for producing center holes in components or workpieces which requre machining between centers Available
More informationTOOL GUIDE. for everyday machining. No-Vibration Solution Tool! TM. DoubleJet JET-STREAM TM. DoubleJet KOOL-CUT TM
TOOL GUIDE for everyday machining DoubleJet JET-STREAM TM No-Vibration Solution Tool! TM DoubleJet KOOL-CUT TM Inch Volume 6 TABLE OF CONTENTS Carbide Turning Inserts 3 Square Toolholders 17 Boring Bars
More informationChuck. Weight (lbs) Model Style. 3 Jaw Chuck 6 Jaw Chuck. Price Each. Weight (lbs) Max. RPM
MANUAL SROLL HUKS Ajust Tru Style MODEL ATS BUK HUK is continuously striving to make its products better so that your production can be more efficient! Buck has engineered and built some of the finest
More informationDRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES JOBBER DRILL SETS 13 Piece -1/16-1/4" x 64ths Material Drill Point Finish Brand HSS 118 Bright Precision Twist Drill PTD-090164 $21.15 HSS 118 Black Oxide Precision
More informationWe Offer A Large Selection of Live & Dead Centers For All Applications: CNC Lathe-High RPM live and dead centers for precision turning applications.
HUK JAWS MAHINE VISES LATHE WORKHOLDING MAGNETI HUKS LIVE ENTERS/REVOLVING ENTERS How To Select The Proper enter: 1) Determine whether you need a live or dead center. 2) Determine the taper of the shank
More informationThe best suggestion for precision machining of "hard to machine"materials.
PCBN&PCD INSERTS The best suggestion for precision machining of "hard to machine"materials. YCB011 PCBN grade for high speed, precision machining of cast iron. YCB012 PCBN grade for high speed precision
More informationBENCH & PEDESTAL GRINDING WHEELS
ENCH & PEDESTAL GRINDING WHEELS ENCH & PEDESTAL GRINDING WHEELS ROWN ALUMINUM OXIDE -Straight Aluminum oxide for general purpose off-hand work Straight vitrified wheels used for tool sharpening and grinding
More informationNew product for turning. PCBN&PCD inserts
New product for turning PCBN&PCD inserts Polycrystalline Cubic Boron Nitride PCBN PCBN is a synthesis of CBN powder and special binder under ultra-high pressure and high temperature conditions. PCBN has
More informationTools for External Turning, Internal Boring, and Cartridges
Tools for External Turning, Internal Boring, and Cartridges External Turning Toolholders Catalog Numbering System...............................................A4 A5 External Turning Toolholders Overview..............................................................A6
More informationTOP NOTCH COMPATIBLE GROOVING INSERTS MADE IN THE. Coolant Port. Min Bore MADE IN THE USA. Toolholder/ Boring Bar. Left or. Right Hand.
TOP NOTCH COMPATILE GROOVING INSERTS SMALL HOLE THREADING & GROOVING ARS DEEP GROOVING-SINGLE ENDED INSERTS Gage Diameter 0.375 0.094 2.39 0.250 0.195 0.344 0.505 0.125 3.18 0.250 0.195 0.344 0.505 0.189
More informationUniversal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135
TOOLING NEWS E-135 New Coated Grade for General Steel Turning Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology Coated Grade for Steel Turning
More informationCAT.AC6040M/AC6030M.3/15. Carbide Grades for Turning AC6030M / AC6040M. AC6030M & AC6040M Grades for machining stainless steels M
CAT./.3/15 Carbide Grades for Turning / & Grades for machining stainless steels M Features & Benefits s new Absotech platinum PVD grade coating, with fine grains and high hardness, achieved 1.5 times higher
More informationPRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS
PRODUT SELETION GUIDE - TOOLHOLDERS www.thinbit.com/qr7-1 Scan this code for additional information. DPTERS dapters Square and round adapters Use for boring bars and solid carbide tooling THINIT ROUND
More informationTOP NOTCH COMPATIBLE GROOVING INSERTS
TOP NOTCH COMPATILE GROOVING INSERTS DEEP GROOVING-DOULE ENDED INSERTS Gage Diameter 0.375 DEEP GROOVING-DOULE ENDED INSERTS Full Nose Radius-Gage Diameter 0.375 FACE GROOVING-DOULE ENDED INSERTS Gage
More informationSPINDLE ADAPTER SELECTION GUIDE
CHUCK JAWS RETENTION KNOS SPINDLE ADAPTER SELECTION GUIDE DETERMINING SPINDLE TYPE & SIZE Type A1 and A2 s with A2 mounts can be installed on either A1 or A2 spindle nose. Camlock Type D1 Nose Type A1
More informationALORIS TOOL TECHNOLOGY CO., INC. REV 1/12. All Aloris products are
LORIS TOOL TECHNOLOGY CO., INC. 22 CTLOG The Originator of Quick Change Tooling REV ll loris products are proudly made in the US. TLE OF CONTENTS INTRODUCING LORIS INDEXLE TOOL OSTS & SETS New roduct uilt
More informationROUND JAWS- AMERICAN STANDARD TONGUE & GROOVE. Tongue to Front J. Hght Inch A. Pie Dia B
HUK WS LTH WORKHOLIN MHIN VISS VIS WS RTNON KNOS R,, T OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNIN & ORIN NMILLS, RILLS TPS & RMRS RSIVS MSURIN TOOLS MRO & STY LT STOK/RILL RO ROUN WS- MRIN STNR TONU &
More informationTurning Operation. Tough Impact Resistant High Cutting Speed. Hard & Tough Impact & Wear Resistant. Medium Cutting Speed
Carbide F149 F150 Notes Insert Grade Chart Material Turning Operation Universal Roughing Hard & Wear Resistant Hard & Tough Impact & Wear Resistant Tough Impact Resistant High Cutting Speed Cutting Speed
More informationAPPLICATION REFERENCE
O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides
More informationAC6020M /AC6030M / AC6040M
CAT.AC6000MBROCHURE.12/16 Electric Carbide, Inc. / /, & Grades for machining stainless steels M & Features & Benefits s new Absotech platinum CVD grade coating, with fine grains and high hardness, achieved
More informationTOOL GUIDE 2017 METRIC TURNING & BORING MILLING. KNURLING TOOLS Call: Visit:
TURNING & BORING MILLING TOOL GUIDE for everyday machining 2017 METRIC KNURLING TOOLS Call: 979-282-2861 Visit: www.doriantool.com E-mail: sales@doriantool.com 1 CARBIDE INSERTS & TURNING TOOLS Technology,
More informationBriney. Tooling Systems INDEX
ITEM PG. bout riney...2 Shank ata...3 Shrink Fit enefits...4 Shrinker dvantages...5 Induction Heating Units...6 Thermax & ccessories...7-8 Tru-Therm & ccessories...9-10 Induction Unit hanging System...11
More informationCOLLET FIXTURES, CHUCKS AND COLLETS FOR MACHINING CENTERS ROTARY TABLES MANUAL LATHES GRINDERS
OLLET FIXTURES, HUKS N OLLETS FOR MHINING ENTERS ROTRY TLES MNUL LTHES GRINERS ROYL QUIK-GRIP POWER-LOK HYRULI OLLET FIXTURES Extremely Fast ollet hanges hanging collets on a Royal Quick-Grip Power-lock
More informationKAISER TOOL COMPANY, INC.
U.S. PTENT NOS. 6,688,816 and 6,824,333 S External threading within.070" of a shoulder. Internal ME threading with 1.250" minimum bore diameter. 4 threads per inch and greater. Sub-micron grain DUR-MX
More informationPROMOTIONS2014. Valid from February 17 to June 30,
PROMOTIONS2014 Valid from February 17 to June 30, 2014 www.iscarmetals.com Double-Sided Profiling Inserts with Six.250" Corner Radii The HELIDO H606 line is an economical tool and insert system which features
More informationtel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
More informationAPPLICATION REFERENCE
O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS:
More informationCutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
More informationCA55 05/15/25/35. Series CA5505 CA5515 CA5525 CA5535. Innovative CVD Coated Carbides for Steel Machining CP154-1-E. High speed.
CP1541E CA55 05/15/25/35 Series Innovative Carbides for Steel Machining High speed.long tool life CA5505 Light Interrupted CA5515 Interrupted.General use CA5525 Heavy Interrupted CA Innovative Carbides
More informationKAISER TOOL COMPANY, INC.
O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 PROFILE: 60 Insert Shown in Toolholder PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with
More informationR8 Tool Holders MADE IN EUROPE
R8 Tool Holders MADE IN EUROPE TMX R8 HOLDERS AND KNEE MILLS the perfect pairing of reliability and tradition Image courtesy of the Hardinge Group Though developed in 1936, the knee mill has made a recent
More informationCNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION
N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION ROYL OMPT N R PULLERS utomate ny N Lathe q Great for use with small N lathes compact design minimizes tool interference. q Very easy to setup
More information90 Long Edge Helical End Mill
Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping
More informationCLEARANCE SALE. KORLOY & Miscellaneous Inserts Carbide & Cermet Inventory Clearance
963 Martin Grove Road, Rexdale, Ontario M9W 4V6 Phone: 416-244-5361 or 1-800-268-1484 Fax: 416-241-2396 E-mail: tools@machinerycanada.com Web: www.machinerycanada.com CUTTING TOOLS CLEARANCE SALE All Sales
More informationCNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION
N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION ROYL OMPT N R PULLERS utomate ny N Lathe ll parts subject to wear are hardened for strength and durability. q Great for use with small N lathes
More informationSimple and highly rigid clamping
New 091G Single Action Type DOULE CLAMP SERIES Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts. Series expansion.
More informationNEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning
Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased
More informationUpdate B158J New Chip Breaker Inserts for Turning Expanded Inserts
2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New
More informationCATALOG N/C TOOLING SYSTEMS
TLOG 211-1 N/ TOOLING SYSTEMS www.tecnaratools.com LPHETIL INDEX ngle ttachments, Fixed Type 23 ngle ttachments, Flange Type 28 ngle ttachments, HLF 33 ngle ttachments, Modular Type 5 ngle ttachments,
More informationCanadians Supporting Canadians Pricing valid from July 1 to September 30, 2014
Canadians Supporting Canadians Pricing valid from July 1 to September 30, 2014 2014 Summer Flyer 8PC ULTIMATE METROLOGY KIT The International Manufacturing Technology Show is one of the largest industrial
More informationALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are
ALORIS TOOL TECHNOLOGY CO., INC. 2 CATALOG The Originator of Quick Change Tooling All Aloris products are proudly made in the USA. INTRODUCING ALORIS INDEXABLE TOOL OSTS & SETS New roduct Built By The
More informationValid from. MARcH 1 - AUGUST 31,
Valid from MARcH 1 - AUGUST 31, 2014 www.tungaloyamerica.com 1 Choices: Shellmill Type Holder 1) Buy 20 inserts, receive 1 shellmill at 25% off 2) Buy 30 inserts, receive 1 shellmill at 50% off 3) Buy
More informationJet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
More informationDouble Clamp Series TOOLS NEWS. New Clamp Bridge Simple and highly rigid clamping. Single Action Type B091G Update
Single Action Type TOOLS NEWS 2015.5 Update 091G Double Series New Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts.
More informationLeading edge technology for high efficiency steel turning
TOOL NEWS New CVD Coated Grade for High Speed Steel Turning 2013.4 Update B165A /RP Breaker Expansion Leading edge technology for high efficiency steel turning 2 in 1 technology ensures longer tool life.
More informationof the fence to cut multiple pieces up to 411 2" long. Then slide it into the fence for storage (inset).
f e a t u r e p r o j e c t djustable Miter Gauge Fence n adjustable fence and two simple stops provide quick, accurate setups when using a miter gauge. One of the simplest accessories you can add to the
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationPhone (800) Fax (330)
atalog 101 1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More information9605 with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge.
with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge. NEW TURNING GRADE FOR DIFFICULT-TO-MACHINE MATERIALS LESS SCRAP. LESS FAILURE. LESS STRESS. MAKE US PROVE IT 960. YOUR ANSWER TO DIFFICULT-TO-MACHINE
More informationTolerance exceeds Industry Standards Hardened for maximum longevity
NEW! NEW! BRT Pull Studs Material is 20CrNiMo Certified Finish is 32 Micro or better Tolerance exceeds Industry Standards Hardened for maximum longevity See pages 17 & 18 for a complete listing of all
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More informationCOMPACT CNC BAR PULLERS Automate Any CNC Lathe
N ar Pullers OMPT N R PULLERS utomate ny N Lathe Great for use with small N lathes compact design minimizes tool interference. Very easy to setup and use. Unit can pull round, square, and hex stock. Flexible
More informationMILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
More informationP PM M K N S H TOOLING NEWS E-126. Uncoated Cermet Grades T1000A / T1500A. T1000A - High Speed Finishing Grade. T1500A - General Purpose Grade
TOOLING NEWS E-126 P PM M K N S H Uncoated s / - High Speed - General Purpose Uncoated / Cutting Speed (/in) Application Range 400 300 200 100 0 Light to Continuous Cutting Usage of Series T1500Z Continuous
More informationShop #6, Plot #30, Sector #M/10, Musaffah Industrial Area, Abu Dhabi,UAE.
Shop #6, Plot #30, Sector #M/10, Musaffah Industrial Area, Abu Dhabi,UAE www.alaqeeqtt.com CARBIDE COUNTERSINK CUTTER SOLID CARBIDE DRILL BITS SOLID CARBIDE SLOT DRILL DIGIMATIC HEIGHT GAGE SERIES 192
More informationWe Got You Covered! From Prototype to Production. Haas Factory Outlet. Copyright 2011 by Dorian Tool, East Bernard, Texas. All rights reserved.
Haas Factory Outlet 2011 From Prototype to Production We Got You Covered! Made In U.S.A. Copyright 2011 by Dorian Tool, East Bernard, Texas. All rights reserved. Victory Automatic Thru Coolant Tool Post
More informationValue-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
More informationKAISER TOOL COMPANY, INC.
SERTS External grooving. Internal Static O-Ring grooving with 1.250" minimum bore diameter. Sub-micron grain DUR-MX 2000 and 5000 arbides. Inserts available with TiN, Ti, TiN and Diamond coating. Insert
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationPR1535. MEGACOAT NANO Insert Grade for Turning. Tough Grade for Heat-Resistant Alloy, Titanium Alloy, and Stainless Steel
Insert Grade for Turning Tough Grade for,, and tainless teel First Choice for,, and tainless teel Reduced udden Fracturing during cale Removal and Interrupted Machining Reliable and Tough Grade for 35
More informationMulti-Purpose Handles Lift, Pull, Cabinet and Finger
Multi-Purpose Handles from UNITED Multi-Purpose Handles Lift, Pull, Cabinet and Finger LIFT Fixtures Cabinets ZINC PLTED WROUGHT STEEL UNITED'S UNIVERSL FVORITE! Strong Simple Quick Installation Widely
More informationAccessories. Scan these QR Codes Featured Video. Current Promotion
Current Promotion Scan these QR Codes Featured Video 211 TOOLJAW The Toolholder Clamp Champ Description BT30 Taper TOOLJAW BT35 Taper TOOLJAW BT40 Taper TOOLJAW BT45 Taper TOOLJAW BT50 Taper TOOLJAW CT30
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationTABLE OF CONTENTS Master Catalog 5. Call Us Or Visit Our Website For Our Complete Selection! LATHE CHUCKS VISE JAWS STRAIGHT SHANK
TL OF ONTNTS WORKHOLING FOR LTHS JW ORING TOOLS Jaw oring Rings, oring Stars, nti acklash Rings 10 LTH WORKSTOPS orian N Spindle Workstop, U-STOP, Royal huck Stops 10-11 HR HUK JWS (TOP JWS) Hard Jaws
More informationWIDIA Specialty Toolholders
WIDIA Specialty Toolholders Meaning of Bar Peeling in Bar Manufacturing..............................................................G4 Application Range of WIDIA Bar Peeling Tools.............................................................G5
More informationShop Supplies. Catalog No.901C
Catalog Workholding Tools Shop Supplies Machinery www.chinabestools.com Catalog No.90C Welcome to ESTOOL! We will try to be best supplier from China in Measuring Tools, Cutting Tools, Machinery and ccessories
More informationLathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±.
Lathe Tool Holders U.S. Patent 0 other US & foreign patents pending Specifications are subject to change without notice DWLNR/L - WNMG, 0 Trigon This tool is designed for primarily turning applications
More informationROUND JAWS- 1.5 mm x 60 Serrations. FOR USE ON: Kitagawa, Samchully, Strong, MMK, SMW Autoblok, Howa & Hitachi-Seiki Chucks. Pie Dia B.
HUK WS LTH WORKHOLIN MHIN VISS VIS WS ROUN WS- 1.5 mm x 60 Serrations FOR US ON: Kitagawa, Samchully, Strong, MMK, SMW utoblok, Howa & Hitachi-Seiki hucks M IN TH US 2 Round aws allow for complete gripping
More informationFIXTURE-PRO MULTI-AXIS QUICK CHANGE FIXTURING
MULTI-XIS QUIK HNGE FIXTURING Introduction Fixture-Pro Modular Workholding Systems... 64-65 rop & Lock Pallet hangers...66-67 Top Tooling...68 Multi-xis Workholding Subplates...69 Risers... 70-71 Rotary
More informationU.S. PATENT NOS. 6,688,816 and 6,824,333 INSERT WIDTH TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PG 9-20
U.S. PTENT NOS. 6,688,816 and 6,824,333 SERTS.025",.045",.062",.085" and.115" Parting off up to 1" diameter 0 or 7 lead angle Centered or Offset Sub-micron grain DUR-MX 2000 and 5000 s and High Speed Steel.
More informationSpecifications: Hole Sizes: Selector Pin Hole: 3/8 (0.375 ) Trigger Pin Hole: 5/32 (0.156 ) Hammer Pin Holes: 5/32 (0.156 )
80% Arms AR-15 Jig manual Thank you for purchasing our AR- 15 jig. This precision self- aligning jig will allow you to finish your 80% Arms and other 80% lowers using only a drill press and a few common
More informationAddendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit
Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit PN: L250150309 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationNo-Mar tip conversion/replacement procedure
No-Mar tip conversion/replacement procedure This procedure can be used for customers who want to convert their legacy Delrin demount tips to the new No- Mar tips, or for customers that just need to replace
More informationTurning inserts CNMG-DF CNMG-SF CNMG-EF CNEG-NF DNMG-DF DNMG-SF DNMG-EF DNEG-NF SNMG-DF SNMG-EF SNMG-SF TNMG-DF TNMG-SF TNMG-EF VNMG-DF
Shenzhen Lys Technology Co., Ltd Turning Product overview Turning inserts For finishing CN-DF CN-SF CN-EF CNE-NF DN-DF DN-SF DN-EF DNE-NF SN-DF SN-EF SN-SF TN-DF TN-SF TN-EF VN-DF VN-EF VNE-NF VN-SF WN-DF
More informationT1500A / T1500Z. Cermet Grades for machining steels, stainless steels, cast irons and powdered metals M. Cermet Grades for Turning
CAT./.11/14 Cermet Grades for Turning / Cermet Grades for machining steels, stainless steels, cast irons and powdered metals P M K Powdered Metal Features & Benefits General purpose cermet grade that provides
More information3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated
More informationWORKHOLDING SOLUTIONS
JERGENS WORKHOLING SOLUTIONS WORKHOLING SOLUTIONS Fixture Pro Multi-xis Quick hange Fixturing WORKHOLING SOLUTIONS SPEILTY FSTENERS LIFTING SOLUTIONS 2015 jergens, inc. IMG0915 15700 S. Waterloo Road.
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationMIX & MATCH CAT40 ER Collet Chucks & Collets
Canadians Supporting Canadians Pricing valid from January 1 to March 31, 2019 2019 Winter Flyer MIX & MATCH CAT40 ER Collet Chucks & Collets Huge Savings on a 6-Pack CAT40 ER Collet Chucks 1. Select 6
More informationFEATURING NOW AVAILABLE! PAGES 44 & 45 PAGES 24 & 25 PAGE 6 PAGE 39 PAGE 26 TOP SELLER! 22 Pc. Ball Driver Set Dial Calipers
FEATURING PAGES 44 & 45 PAGES 24 & 25 22 Pc. Ball Driver Set Dial Calipers NOW AVAILABLE! Featuring High Performance Indexable Carbide TOP SELLER! $ 15 95 PAGE 26 STARTING AT $ 97 95 PAGE 39 PAGE 6 s Effective
More informationARCHITECTURAL HARDWARE & ACCESSORIES
RHITETURL HRDWRE & ESSORIES rado Denver, olo DOOR PROTETION PLTES & DOOR EDGES DON-JO MFG., IN. P.O. ox 929 Sterling, M 01564 PHONE: 978.422.3377 FX: 978.422.3467 WTS: 800.628.8389 WTS FX: 800.278.8202
More informationV blocks. Materials. V-block
V blocks I needed a pair of identical V-blocks to clamp the Bonelle/Quorn toolholder. I wanted to mill the sides of the tool holder parallell to the mandrel and bar bed centre lines. To get two identical
More informationEntry Level Assessment Blueprint Precision Machining
Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures
More informationHIGH SPEED SPINDLES OIL TURBINE DRIVEN
HIGH SPEED SPINDLES OIL TURBINE DRIVEN be driven. 2 The Toodle is a new, high speed, turbine-driven spindle. It costs a fraction of competing spindle systems... The Toodle may be driven by through-coolant,
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationMilling Series. Product Lineup M4. Milling Indexable Inserts. Milling Inserts Identifi cation System M9 Milling Inserts. Corner Angle 45 MOF45
1~12 eries Product ineup Indexable Inserts Inserts Identifi cation ystem Inserts 1 Corner Angle OF 22 OFX Easy edge adjustment 2 E 2 E-F Easy edge adjustment 28 D 1 O- / O / O- 2 Corner Angle R P / E Corner
More informationInc. One Stop Tooling and Machine Shop. Our Mission
PARTNER Inc. One Stop Tooling and Machine Shop Our Mission NTM is committed to providing the best possible service and products to our customers. Whether it s manufacturing special tooling, machining,
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationGEN2 T-A Drill Inserts
7/8 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 7 Series HSS iameter Range: 89.10mm - 101.60mm (3.508-4.000 ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS RMING
More informationExtracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
More informationWiper Inserts for Steel Turning
Product Brochure Wiper s for teel Turning WE & WF Negative Wiper s in Carbide and Cermet NEW OLID ROUND OLUTION DRILLING OLUTION TURNING OLUTION MILLING OLUTION Two Ways to ave! 1) Buy 20 s, Get FREE (Promo
More informationInc. One Stop Tooling and Machine Shop. Our Mission
Inc. One Stop Tooling and Machine Shop Our Mission NTM is committed to providing the best possible service and products to our customers. Whether it s manufacturing special tooling, machining, or one of
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationTOOL HOLDER SYSTEMS FOR
TOOL HOLDER SYSTEMS FOR HAAS OL-1 CNC OFFICE LATHE AND HAAS HPCL CNC TOOLROOM LATHE FOR ANY ADDITIONAL INFORMATION, OR INQUIRIES ON PURCHASING, CONTACT YOUR LOCAL HAAS FACTORY OUTLET ONLINE TECHNICAL INFORMATION
More information