SPINDLE ADAPTER SELECTION GUIDE

Transcription

1 CHUCK JAWS RETENTION KNOS SPINDLE ADAPTER SELECTION GUIDE DETERMINING SPINDLE TYPE & SIZE Type A1 and A2 s with A2 mounts can be installed on either A1 or A2 spindle nose. Camlock Type D1 Nose Type A1 has tapped holes on both inner and outer bolt circles F1 F2 Cmax ThreadE1= E2UNC- A /1-14 A /1-14 A /2-1 A /8-11 A /4-10 A /8-9 A A /4-7 Type A2 DOES NOT have tapped holes on inner circle INDEXALE DRILLS TURNING & ORING Type L Long Taper Key Drive Nose A F Cmax E D of s Camlock Stud 9/1 D /8 D /4 D /8 D D /1 D /8 Threaded ARASIVES Nose Thread C Key A Nose A MASTER CATALOG F D E L00 /4"-" 2 /8x/8x11/ "-10" UNS L0 41/2"-" 2/8 /8x/8x1/ /2"-8" UN L1 "-" 27/8 5/8x5/8x2/ /1"-10" UN L2 7/4"-5" /8 /4x/4x27/ /4"-8" UN L 10/8"-4" 7/8 1x1x1/ /1"-" UN /4"-8" UN Images and diagrams provided by Toolmex Corporation. Toolmex, ison, ison-bial and TMX are all registered trademarks of Toolmex Corporation.

2 ISON SET-TRU SCROLL CHUCKS, 4 & JAW SET-TRU SCROLL CHUCKS With Fine Adjustment, T.I.R. Forged Steel ody, Two-Piece Top Reversible Jaws SET-TRU Scroll s can be used for all machining operations where universal chucks are used, along with applications where universal scroll chucks require tighter tolerances. Outstanding accuracy, versatility and long life makes ison SET-TRU chucks invaluable in the workshop and indispensable in the toolroom. SET-TRU Features and enefits: Fine adjustment, pinion design 4 micro adjustment screws provide.0004" T.I.R. repeatability Two piece top and master jaws are American Standard tongue and groove Scrolls are forged and fully hardened, thread flanks ground on both sides, then precisely balanced for longer life and higher accuracy scroll is precisely balanced Jaw teeth and guides on both sides are fully hardened and ground. chuck is balanced within fine limits ACKPLATES FOR SET-TRU CHUCKS Type A Type D Type L Jaw Set-Tru s 4 Jaw Set-Tru s Jaw Set-Tru s Call Us Or Visit Our Website For Our Complete Selection! MASTER CATALOG I $ I $1, I $ I $1, I $1, I $1, I $1, I $1, I $1, I $2, I $2, I $2, I $2, I $2, I $, I $5, Fully Machined Type A Fully Machined Type D Fully Machined Type L 1 REPLACEMENT PARTS FOR SET-TRU CHUCKS Hard Top Jaws Scroll Wrench Taper A4 I $ D1- I $05.10 L00 I $ A5 I $ D1-4 I $27.0 L00 I $ A I $ D1-5 I $52.80 L0 I $24.0 A5 I $27.0 D1- I $59.10 L00 I $255.0 A I $24.90 D1-4 I $9.0 L0 I $25.50 A5 I $25.50 D1-5 I $9.0 L1 I $ A I $2.40 D1- I $94.20 L00 I $24.90 A5 I $1.80 D1-4 I $ L0 I $24.90 A I $1.80 D1-5 I $42.90 L1 I $24.90 A8 I $25.80 D1- I $ L0 I $54.0 A I $ D1-8 I $ L1 I $54.0 A8 I $501.0 D1-5 I $ L2 I $ A11 I $ D1- I $04.80 L1 I $ A I $70.50 D1-8 I $ L2 I $1,0.20 A8 I $70.50 D1- I $ L I $1,05.0 A11 I $70.50 D1-8 I $81.0 D1-11 I $ D1-8 I $1,10.10 D1-11 I $1,10.10 Hard Top Jaw Set Master Jaw Set Scroll Pinion Fully machined steel backplates for Set-Tru s Threaded backplates also available Jaw s I $ I $42.0 TG-50HJ2-I $ I $ I $2.10 I $45.00 TG-0HJ2-I $20.40 I $ I $ I $54.00 Master Jaws TG-80HJ2-I $22.20 I $ I $87.00 I $4.80 TG-100HJ2-I $ I $ I $510.0 I $81.00 TG-120HJ2-I $4.80 I $ I $1,254.0 I $ TG-150HJ2-I $45.0 I $ Wrench Fine Adjustment Screw Jaw s TG-50HJ2--I $9.90 I $82.50 I $42.0 I $1.50 Pinion TG-0HJ2--I $ I $24.90 I $45.00 I $17.10 TG-80HJ2--I $ I $9.00 I $45.00 I $17.10 TG-100HJ2--I $44.40 I $474.0 I $55.80 I $17.10 TG-120HJ2--I $ I $82.20 I $55.80 I $17.10 Adjustment Screw 1 TG-150HJ2--I $1, I $ I $81.00 I $17.10 LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

3 CHUCK JAWS MANUAL CHUCKS FORGED STEEL ODY SCROLL CHUCKS Model ATSC- Hardened Reversible Top Jaws UCK CHUCK is continuously striving to make its products better so that your production can be more efficient! uck has engineered and built some of the finest chucks in the world for over 75 years. Replacement parts and accessories also available. RETENTION KNOS Full Line Available! Please call for more information. FEATURES: Ajust-Tru- the original, renowned adjustment mechanism Forged Steel ody Hardened and ground scroll and jaws Jaw Model Recommended for general O.D. or I.D. workholding. These chucks remain accurate throughout the life of the chuck using the Ajust-Tru feature. Jaw Model is Ideal for thin wall and second operation machining. Eliminates the need for collets as a chuck can handle the work of more than 100 separate collets. s supplied with jaws, wrench and mounting screws Jaw s 4 Jaw s Jaw s ,00 K-80 $ ,00 K-804 $1,05.00,450 K-80 $1, ,000 K-808 $1, ,000 K-8084 $1,409.00,000 K-808 $1, ,000 K-810 $1,57.00,000 K-8104 $2, ,250 K-810 $2, ,00 K-812 $2, ,00 K-8124 $2, ,725 K-812 $2, ,800 K-815 $4, ,50 K-815 $5,88.00 INDEXALE DRILLS TURNING & ORING ARASIVES D1 CAMLOCK MOUNTING PLATES SEMI-STEEL ODY SCROLL CHUCKS Model AT- Hardened Reversible Top Jaws D1 CAMLOCK MOUNTING PLATES FEATURES:.001 TIR repeatability Cast iron body allows for more affordable, yet high quality chuck Hardened and ground scroll is balanced Ships complete with master and hardened top reversible jaws, spring loaded T-wrench and mounting bolts MASTER CATALOG D-4 K-A5-D4 $ D-5 K-A-D5 $ D-5 K-A8-D5 $ D- K-A8-D $49.00 D- K-A10-D $25.00 D-8 K-A10-D8 $85.00 D- K-A12-D $50.00 D-8 K-A12-D8 $85.00 Jaw s Jaw s ,000 K-AT0RC $ ,500 K-AT0RC $1, ,500 K-AT08RC $ ,000 K-AT08RC $1, ,000 K-AT10RC $1, ,00 K-AT10RC $1, ,500 K-AT12RC $1, ,100 K-AT12RC $2,74.00 D-4 K--D4 $ D-5 K--D5 $19.00 D-5 K-8-D5 $ D- K-8-D $ D- K-10-D $2.00 D-8 K-10-D8 $2.00 D- K-12-D $8.00 D-8 K-12-D8 $8.00 A STYLE MOUNTING PLATES A STYLE MOUNTING PLATES A-4 K-A-A4 $ A-5 K-A-A5 $ A-5 K-A8-A5 $ A- K-A8-A $ A- K-A10-A $00.00 A-8 K-A10-A8 $50.00 A-8 K-A12-A8 $ A-11 K-A12-A11 $1,100.0 NEW ITEM! A-4 K--A4 $ A-5 K--A5 $ A-5 K-8-A5 $ A- K-8-A $ A- K-10-A $ A-8 K-10-A8 $ A- K-12-A $8.00 A-8 K-12-A8 $8.00

4 TMX SET-TRU SCROLL CHUCKS SET-TRU SCROLL CHUCKS With Fine Adjustment, T.I.R. Forged Steel ody, Two-Piece Top Reversible Jaws TMX SET-TRU Scroll s can be used for all machining operations where universal chucks are used, along with applications where universal scroll chucks require tighter tolerances. SET-TRU Features and enefits: Fine adjustment, TIR pinion design 4 micro adjustment screws provide.0004" T.I.R. repeatability Two piece top and master jaws are American Standard tongue and groove Scrolls are forged and fully hardened with thread flanks ground on both sides, then precisely balanced for longer life and higher accuracy Jaw teeth and guides on both sides are fully hardened and ground. Plain back chuck- mounting plates required. Jaw Set-Tru s 4 Jaw Set-Tru s Jaw Set-Tru s chuck is provided with: 1 Set of hard master jaws 1 Set of hard top reversible jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws Eye bolts (1 only) ACKPLATES FOR SET-TRU CHUCKS Fully machined steel backplates for precision accuracy TMX Set-Tru s Type A CHUCK KEYS Crafted from high quality tool steel Available in standard and self-ejecting models s available from 1/4 to 9/1 square head size Type D Type A Type D A5 I P $ D1-4 I P $ A5 I P $181.7 D1- I-875-0P $25.98 A I P $181.7 D1-4 I P $25.98 A5 I P $ D1-4 I P $ A I P $ D1-5 I P $ A8 I P $ D1- I P $01.10 A I P $.7 D1- I P $ A8 I P $.7 D1-8 I P $ A11 I P $57.5 D1- I P $51.47 A8 I P $57.04 D1-8 I P $58.9 A11 I P $ D1-11 I P $ LATHE CHUCK SAFETY WRENCHES Spring-load sleeve ejects the wrench from the chuck after each use Chamfered end for easy entry Designed to provide proper loads for self-removal of the wrench weight High visibility yellow handle Helps prevent accidents NEW ITEM! I P $ I P $ I-8-000P $ I P $ I P $ I P $ I P $1, I P $1, I P $1, I P $1, I P $1, I P $1, I P $1, I P $1, I-8-100P $2, I P $, I P $,24.18 C LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY Standard Self-Eject Standard Self-Eject Square Head 1/4" A $ /1" A $11.00 A $18.00 /8" A $11.00 A $ /1" A $ /2" A $12.50 A $ /1" A $ Nominal Actual Call Us Or Visit Our Website For Our Complete Selection! MASTER CATALOG 77 ar Overall Engagement Length 9/2 SQ.271 / /4 FX $ /1 SQ.0 / /4 FX $114.7 / SQ. / /4 FX $ /1 SQ.427 / /4 FX-1547 $ /2 SQ.490 / /4 FX $ /1 SQ /1 1.1 /4 FX $ / SQ.1 15/1 1.1 /4 FX $12.44 /4 SQ /1 1.1 /4 FX $12.44 PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

5 CHUCK JAWS RETENTION KNOS INDEXALE DRILLS TURNING & ORING ARASIVES ZERO-SET MANUAL CHUCKS JAW SCROLL CHUCKS-ZERO SET With Top Reversible Jaws FEATURES: High precision TIR repeatability on duplicated parts 2-piece reversible jaws for OD and ID work Scroll and jaws hardened and ground for increased life and gripping force Must be used with Zero-Set backplates from TC 1 A-MOUNT ACKPLATES -Jaw Zero Set s MASTER CATALOG -Jaw Zero Set s 1.5, T-S10R $ , T-S10R $1, ,00 52 T-S108R $ ,00 57 T-S108R $1, ,900 7 T-S110R $1, , T-S110R $1, , T-S112R $1, ,00 14 T-S112R $2, , T-S115R $2, , T-S115R $4, ZERO SET MOUNTING PLATES FEATURES: Designed for easy installation Minimizes overhang by virtue of recessed design Fully finished mounting plates A2-4 T-AS-04 $ A2-5 T-AS-05 $ A2-5 T-AS-02 $ A2- T-AS-0 $ A2-5 T-AS-07 $ A2- T-AS-08 $ A2-8 T-AS-09 $25.50 A2-5 T-AS-11 $21.00 A2- T-AS-12 $21.00 A2-8 T-AS-1 $ A2- T-AS-15 $28.00 A2-8 T-AS-1 $28.00 A2-8 T-AS-44 $ A2-11 T-AS-49 $ D-MOUNT ACKPLATES D- T-CD-205 $ D-4 T-CD-221 $ D- T-CD-20 $ D-4 T-CD-201 $ D-5 T-CD-202 $ D- T-CD-20 $ D-4 T-CD-204 $ D-5 T-CD-208 $ D- T-CD-209 $ D-8 T-CD-207 $ D-5 T-CD-210 $25.50 D- T-CD-211 $25.50 D-8 T-CD-212 $15.00 D- T-CD-214 $10.50 D-8 T-CD-215 $24.00 D-8 T-CD-27 $ D-11 T-CD-2 $75.00 REPLACEMENT PARTS FOR ZERO SET CHUCKS Hard Top Jaws ody (2 piece) Master Jaws Scroll Model 1 L-MOUNT ACKPLATES L-00 T-LT-10 $ L-0 T-LT-104 $ L-00 T-LT-100 $ L-0 T-LT-101 $ L-00 T-LT-108 $ L-0 T-LT-109 $ L-1 T-LT-110 $ L-00 T-LT-111 $25.50 L-0 T-LT-112 $25.50 L-1 T-LT-11 $25.50 L-0 T-LT-115 $7.50 L-1 T-LT-11 $7.50 L-0 T-LT-175 $ L-1 T-LT-17 $ L-2 T-LT-177 $454.50, Master Jaws, THREADED MOUNT ACKPLATES 1-1/2-8 T-TH-90 $ /4- T-TH-904 $ /2-8 T-TH-950 $ /4- T-TH-951 $ /4- T-TH-955 $ /8- T-TH-958 $ /4- T-TH-985 $ /8- T-TH-98 $ /4- T-TH-994 $ /4- T-TH-995 $ /8- T-TH-989 $ /8- T-TH-997 $ /4- T-TH-999 $ Hard Top Jaw Set Master Jaw Set ody (2 Pc) Scroll Set Set Jaw Zero Set s 105R T-50-7 $ T-50- $15.00 T-50-8 $25.00 T-50-1 $ R T-0-7 $15.00 T-0- $ T-0-8 $15.00 T-0-1 $ R T-80-7 $ T-80- $ T-80-8 $50.00 T-80-1 $ R T-10-7 $25.00 T-10- $ T-10-8 $ T-10-1 $ R T-12-7 $25.00 T-12- $5.00 T-12-8 $ T-12-1 $ R T-15-7 $ T-15- $ T-15-8 $ T-15-1 $ Jaw Zero Set s 10R T-0-7 $25.00 T-0- $ T-0-8 $ T-0-1 $ R T-80-7 $5.00 T-80- $75.00 T-80-8 $ T-80-1 $ R T-10-7 $ T-10- $ T-10-8 $ T-10-1 $ R T-12-7 $55.00 T-12- $ T-12-8 $95.00 T-12-1 $ R T-15-7 $ T-15- $ T-15-8 $1,95.00 T-15-1 $95.00 Additional Replacement s Also Available. Please Call For More Information. D

6 ISON MANUAL CHUCKS JAW SELF-CENTERING SCROLL CHUCKS Forged Steel & Semi-Steel ody Plain ack -ackplates Required Extremely accurate and guaranteed to maintain exceptional accuracy for an extended period of time, these chucks have a modern and compact design. For use whenever high precision machining is needed Forged or semi-steel body All bearing surfaces are carefully hardened and precisely machined Scroll is made of fine quality alloy steel and carefully case hardened Thread flanks are ground on both sides scroll is balanced Teeth and guides are hardened and fully ground on both sides pinion design Hardened and ground pinions Two-Piece Reversible Jaw s are provided with: 1 set of hard master jaws 1 set of hard top reversible jaws 1 chuck wrench 1 set of mounting bolts 2 hex keys Eye bolts for chucks 1 & larger Solid Jaw Style s are provided with: 1 set of hard solid ID jaws 1 set of hard solid OD jaws 1 chuck wrench 1 set of mounting bolts 1 hex key Eye bolts for chucks 1 & larger Two-Piece Jaw Style Solid Jaw Style Forged Steel ody With Two-Piece Reversible Jaws-Type 505 With Solid Hard Jaws-Type 504 lbs Call Us Or Visit Our Website For Our Complete Selection! MASTER CATALOG 79 lbs I $ I $ I $ I $ I $ I $ I $1, I $1, I $1, I $1, I $, I $8, I $11, Semi Steel ody With Two-Piece Reversible Jaws-Type 205 With Solid Hard Jaws-Type 204 lbs I $ I $ I $ I $ I $ I $ I $ I $ I $1, I $1, I $2, I $1, I $5, I $5, I $8, I $7,95.00 A1/A2 Semi-Machined ackplate Fully Machined D1 ackplates Fully Machined Type L ackplates Taper A I $ D1-4 I F $ L00 I $17.40 A8 I $ D1- I F $ L00 I $ A5 I $12.90 D1-4 I F $ L0 I $ A5 I $ D1-4 I F $ L00 I $ A I $ D1-5 I F $ L0 I $ A I $ D1- I F $ L1 I $ A8 I $25.50 D1-4 I F $ L00 I $22.80 A I $.90 D1-5 I F $ L0 I $22.80 A8 I $2.70 D1- I F $ L1 I $27.0 A8 I $51.0 D1-5 I F $84.0 L0 I $ A11 I $51.0 D1- I F $78.90 L1 I $ A2-11 I $84.00 D1-8 I F $8.40 L2 I $ ack View ACKPLATES FOR SELF-CENTERING SCROLL CHUCKS A2-11 I $1,40.10 D1- I F $ L1 I $07.50 A15 I $1,54.20 D1-8 I F $ L2 I $4.50 A2-20 I $1, D1-11 I F $528.0 L I $ Fits and 4 jaw self-centering scroll chucks Machined backplates for plain back chucks May require additional machining to fit Threaded backplates also available Type A Type D Type L D1- I F $ D1-8 I F $ D1-11 I F $ LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

7 CHUCK JAWS RETENTION KNOS ISON DIRECT MOUNT CHUCKS JAW SELF-CENTERING SCROLL CHUCKS Type A1 And A2 Direct Mount With Two-Piece Hard Reversible Jaws Type 215 Type A1 & A2 direct mount chucks Two piece master jaw style jaws Type A1 spindles have a 2 bolt hole patterns, inside and outside the taper. Either an A1 or A2 chuck will fit Type A2 spindles have a 1 bolt pattern outside the taper-only an A2 chuck will fit Hardened and ground pinions Type A2 Mount olt Pattern JAW SELF-CENTERING SCROLL CHUCKS Camlock Type D1, Direct Mount With Two-Piece Hard Reversible Jaws Type A1 Mount olt Pattern A1/A2 Direct Mount s-type 215 A I $82.20 A I $ A I $ A I $1,27.20 A I $1,27.20 A I $1,27.20 A I $1,875.0 A I $1,875.0 A I $, A I $, A I $, A I $7,41.00 A I $10, A I $10, A I $1, INDEXALE DRILLS TURNING & ORING ARASIVES Type 245 Camlock type D1 direct mount chuck Two piece master jaw style jaws Hardened and ground pinions Scroll is drop forged of alloy steel and case hardened Two-Piece Reversible Jaw s are provided with: 1 set of hard master jaws 1 set of hard top reversible jaws (American Std Tongue & Groove) 1 chuck wrench 1 set of mounting bolts 2 hex keys JAW SELF-CENTERING SCROLL CHUCKS Type L Direct Mount, With Two-Piece Hard Reversible Jaws MASTER CATALOG L I $ L I $ L I $ L I $ L I $ L I $1,14.90 L I $1,14.90 L I $1,14.90 L I $1, L I $1, L I $1, L I $2, L I $2, Camlock Type D1 Direct Mount s-type 245 D I $ D I $ D I $ D I $9.00 D I $9.00 D I $9.00 D I $1,18.50 D I $1,18.50 D I $1,18.50 D I $2, D I $2, D I $2, D I $,50.40 D I $,50.40 D I $,50.40 D I $7, D I $7, D I $10,2.00 JAW SELF-CENTERING SCROLL CHUCKS Threaded Direct Mount, With Two-Piece Hard Reversible Jaws Threaded Direct Mount s-type 285/ I $ / I $ I $ / I $ / I $ / I $ / I $ / I $ / I $ / I $1,18.50

8 JAW SCROLL CHUCKS -JAW UNIVERSAL SCROLL CHUCKS Plain ack Forged Steel ody 2-Piece Reversible Jaws Designed to handle precision or heavy duty machining demands Two piece, master jaw style top jaws scroll chuck is statically balanced for longer life and higher accuracy All bearing surfaces carefully machined and hardened bodies are drop forged and hardened to 28 HRc, Master Jaws, -JAW UNIVERSAL SCROLL CHUCKS D-1 Direct Mount Type 2-Piece Reversible Jaws Direct mount camlock type D1-no backplateis required Designed to handle precision or heavy duty machining demands Two piece, master jaw style top jaws scroll chuck is statically balanced for longer life and higher accuracy All bearing surfaces carefully machined and hardened bodies are drop forged and hardened to 28 HRc JAW SCROLL CHUCKS D-1 Direct Mount Type 2-Piece Reversible Jaws FEATURES: 2-piece master jaw style jaws with top reversible jaws for ID and OD workholding Scroll and jaws hardened and ground, Master Jaws, JAW SCROLL CHUCKS Plain ack 2-Piece Reversible Jaws FEATURES: 2-piece master jaw style jaws with top reversible jaws for ID and OD workholding 0.00 TIR repeatability, Master Jaws, Meets ASA specifications on duplicate parts for chucks through diameter Scroll and jaws hardened and ground CHUCK/COLLET STOP Handheld Lathe & Mill Vise Tool Adjustable Precision-Gage lengths up to 5-1/2 long holding +/-.005 Save Money! No more fixed length dedicated shop-made front collet stops for each job Versatile-For use on CNC or manual lathes whether you are running a bar manually or using a bar puller Consistency-Unique design incorporates self-centering & unobstructed viewing Dimensions: L x /4 H x /4 W Made in USA D1 Direct Mount Collet Stock Stop-Loc Adjustable Stop Call Us Or Visit Our Website For Our Complete Selection! MASTER CATALOG 81 D T-0D4 $8.00 D T-0D5 $8.00 D T-08D5 $40.00 D T-08D $40.00 D T-10D $07.75 D T-10D8 $07.75 D T-12D $ D T-12D8 $ D T-15D8 $1, D T-15D11 $1, D T-20D11 $2, D T-20D15 $2, Wt lbs D I-82-08P $95.4 D I-82-10P $1,17.15 D I P $1,17.15 D I-82-12P $1,92.5 D I P $1, D I-82-18P $, D I-82-19P $, D I P $, D I P $8,80.08 D Stop-Loc Guide Wt lbs T-0R $ T-08R $ T-10R $ T-12R $ T-15R $1, T-20R $2, T-25R $4, D I P $ I P $ I P $1, I P $1, I P $2, I P $, I P $7, Stop-Loc MADE IN THE * * * * * * * USA Pat.Pend. Graduations Inch STOPLOC $1.00 Inch/Metric STOPLOC-THSMM $18.00 Metric STOPLOC-MM $18.00 LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

9 CHUCK JAWS RETENTION KNOS TURNING & ORING INDEXALE DRILLS ARASIVES FRONT MOUNTING/LOW PROFILE CHUCKS & 4 JAW FRONT MOUNTING SELF-CENTERING SCROLL CHUCKS With Top Reversible Jaws For use with applications where back mounting chucks cannot be used 2-piece master jaw style jaws with top reversible jaws for ID and OD workholding Also available in forged steel body Jaw 4 Jaw Mounting olts I I Mounting olts Thread of olts Thread of olts $ /1-18 x 2-1/ I $ /1-18 x 2-1/4 $08.40 /18-1 x 2-/ I $75.0 /18-1 x 2-/4 I $99.0 /18-1 x -1/ I $82.20 /18-1 x -1/4 52 I $ /2-1 x -1/ I $1, /2-1 x -1/ I $1, /8-11 x I $1,7.40 5/8-11 x I $2, /8-11 x 4-1/ I $2, /8-11 x 4-1/2 ASE PLATES FOR FRONT MOUNTING CHUCKS Designed for use with ISON and 4 jaw front mounting self-centering lathe chucks Ideal for use on milling and drilling machines as well as on rotary tables with / and 4/8 slots ase plates are supplied with four mounting bolts with t-nuts and one MT pin MT Pin 2 I $ I $29.40 I $0.00 I $ /2 4 I $ I $ JAW SCROLL CHUCKS 2-JAW SCROLL CHUCKS With Soft Top Reversible Jaws With Soft Top Reversible Jaws Type 105 Self-centering Plain back chuckbackplates required Includes 1 set of hard master jaws, 1 set of soft top jaws, chuck wrench, 1 set of mounting bolts, 2 hex keys NEW ITEM! Two jaw chuck with twopiece hard reversible jaws Plain back- adapter plate sold separately Made In Poland Wt. Wt I $ I P $ I $ I P $ I $ I P $ I $1, I P $1, I $2, I P $2,18.7 LATHEGUARDS Prevent Accidents In The Workplace! Clear LEXAN, Semi-Circular wrap-a-round guards Heavy Duty Chrome-plated extension tube and hardware Ready to mount; simply affix mounting bracket with two screws. ack of shield is reinforced with wire-form housing Locks in swing away or functional positions Accepts or 4-Jaw s Included mounting bracket Lathe Cnt Ht. (Shield Height) For Use W/ s Up To (A) Shield Width Shield Length Tube Length Small.9 ¼ 7. FX $14.8 to 12 ¼ 11. FX-100 $ to ½ FX-101 $ to FX-102 $ to FX-104 $ MASTER CATALOG

10 ISON 4 JAW MANUAL CHUCKS 4 JAW SELF-CENTERING SCROLL CHUCKS Semi-Steel ody Plain ack -ackplates Required Two-Piece or Solid Jaw Style All bearing surfaces are carefully hardened and precisely machined Scroll is made of fine quality alloy steel and carefully case hardened Thread flanks are ground on both sides Teeth and guides are hardened and fully ground on both sides pinion design See page 8 for backplates Two-Piece Reversible Jaw s are provided with: 1 set of hard master jaws 1 set of hard top reversible jaws 1 chuck wrench 1 set of mounting bolts 2 hex keys Eye bolts for chucks 1 & larger ack View Solid Jaw Style s are provided with: 1 set of hard solid ID jaws 1 set of hard solid OD jaws 1 chuck wrench 1 set of mounting bolts 1 hex key Eye bolts for chucks 1 & larger 4 JAW INDEPENDENT CHUCKS Semi-Steel ody, Type A1/A2 Direct Mount With Hard Solid Jaws Solid jaws are made of high quality carbon steel and hardened Designed to grip round or odd shaped work Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper. Either an A1 or A2 chuck will fit Type A2 spindles have 1 bolt pattern outside the taper-only an A2 chuck will fit Solid Jaw Style s are provided with: 1 set of hard solid reversible jaws 1 wrench 1 set of clamping bolts 4 JAW INDEPENDENT CHUCKS Semi-Steel ody, Type D1 Direct Mount With Hard Solid Jaws Type D1 direct mount Solid jaws are made of high quality carbon steel and hardened Designed to grip round or odd shaped work Type 444 Wt D I $75.0 D I $71.40 D I $ D I $ D I $ D I $1, D I $1, D I $1,54.20 D I $1,54.20 D I $1,54.20 D I $2, D I $2, D I $,4.20 Wt Call Us Or Visit Our Website For Our Complete Selection! Master Jaw Style Type 05 Solid Jaw Style Type MASTER CATALOG I $4.50 I $ I $ I $ I $81.0 I $ I $9.00 I $ I $1,419.0 I $1, I $2,57.10 I $2, I $, I $9, Type 414 Wt A I $79.80 A I $79.80 A I $ A I $ A I $ A I $1, A I $1, A I $1, A I $1,45.20 A I $1,45.20 A I $1, A I $2, A I $, A I $, JAW CHUCKS Forged Steel ody With 2 Piece Jaws 2 Piece master jaw style jaws Plain back Designed to grip round or odd shaped work Solid Jaw s are provided with: 1 set of hard solid reversible jaws 1 self-ejecting chuck wrench 1 set of mounting bolts 1 hex key Eye bolts with to 20 chucks Wt Lbs I P $ I P $ I P $1, I P $1, I P $2, I P $,54.18 LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

11 CHUCK JAWS MANUAL CHUCKS FOUR JAW INDEPENDENT CHUCKS SOLID JAWS OR TOP REVERSILE JAWS FLATACK These chucks have jaws that are operated individually to allow solid gripping of oddly shaped and square work pieces. Semi-steel body. FOUR JAW INDEPENDENT CHUCKS SOLID JAWS OR TOP REVERSILE JAWS DIRECT MOUNT TYPE D These chucks have jaws that are operated individually to allow solid gripping of oddly shaped and square work pieces. Semi-steel body. s above 1 have 1 piece solid reversible jaws., Master Jaws, D, Master Jaws, Solid Jaw Reversible RETENTION KNOS INDEXALE DRILLS TURNING & ORING T-404 $ T-404R $ T-4084 $ T-4084R $ T-4104 $ T-4104R $ T-4124 $ T-4124R $ T-4144 $ T-4144R $ T-414 $ T-414R $ T-4204 $ T-4254 $2, T-424 $4, T-4404 $, "R" Designates Top Reversible Jaws 4 JAW SQUARE CHUCK Low Profile, Super Thin Universal scroll chuck design Super thin design allows greater Z-axis machining Designed for fast and easy positioning on worktable Ideal for pallet applications, standard mills, vertical machining centers, angle plates and tombstones Master jaw style chuck. Accepts American standard tongue and groove top jaws D T-404D $01.75 T-404DR $ D T-4084D4 $40.75 T-4084D4R $ D T-4084D $40.75 T-4084DR $ D T-4104D5 $ T-4104D5R $.00 D T-4104D $ T-4104DR $.00 D T-4124D $ T-4124DR $ D T-4124D8 $ T-4124D8R $ D T-4144D $87.00 T-4144DR $1, D T-4144D8 $87.00 T-4144D8R $1, D T-414D8 $1,15.50 T-414D8R $1, D T-414D11 $1,15.50 T-414D11R $1, D T-4204D8 $1,99.50 T-4204D8R $1, D T-4204D11 $1, T-4204D11R $1,42.50 D T-4204D15 $1, T-4204D15R $1,42.50 D T-4254D11 $2,95.50 T-4254D11R $2, D T-4254D15 $2,95.50 T-4254D15R $2, JAW ROUND CHUCK Low Profile, Super Thin Three operating pinions positioned at a 45 angle for easier operation Easy installation with flange type mounting Accuracy:.001 repeatability on duplicate parts using the nominated pinion Ideal for pallet applications, standard mills, vertical machining centers, angle plates and tombstones Master jaw style chuck. Accepts American standard tongue and groove top jaws ARASIVES ase Dimensions 8.4 x PA-MCA $1, x PA-MCA8 $1, x PA-MCA10 $1, x PA-MCA12 $2, JAW MACHINE FIXTURE Low Profile, Self-Centering Forged Steel ody with rectangular base Ideal for all types of milling, grinding, drilling and tapping operations on vertical and horizontal CNC machines as well as conventional milling and grinding machines All surfaces are hardened and precision ground, square and parallel to an accuracy of Repeatability within TIR Ideal for pallet applications Comes with 1 set of two-piece reversible jaws (hard top and hard master jaws), 1 ratchet wrench, 1 angled wrench and 1 set of 2 mounting bolts with T-nuts and two T-slot keys ase. hole hole PA-NK $1, PA-NK8 $1, PA-NK10 $1, PA-NK12 $1, Clamping Range A Q K C D E E1 F G H M=P S T OD ID I $1, I $1, I $2, MASTER CATALOG

12 ISON REPLACEMENT PARTS REPLACEMENT PARTS FOR ISON CHUCKS HARD TOP JAWS-OEM STYLE American Standard Tongue & Groove Jaws HARD MASTER JAWS FOR 2, & 4-JAW SELF-CENTERING SCROLL CHUCKS American Standard Tongue & Groove Jaws ID & OD HARD SOLID JAWS FOR & 4-JAW SCROLL CHUCKS Groove Width Tongue Width OAL Height ID Jaws -Jaw s 4-Jaw s -Jaw s 2-Jaw s -Jaw s 4-Jaw s - I $ I $21.00 I $ I $ I $29.40 I $ I $ I $21.90 I $ I $ I $20.40 I $29.40 I $0.90 I $ I $ I $ I $ I $74.40 I $1, I $924.0 I $1, I $1, OD Jaws TG-50HJ2-I $ TG-50HJ2-4-I $00.0 TG-50HJ2--I $ TG-0HJ2-I $20.40 TG-0HJ2-4-I $0.90 TG-0HJ2--I $ TG-80HJ2-I $22.20 TG-80HJ2-4-I $4.50 TG-80HJ2--I $ TG-100HJ2-I $ TG-100HJ2-4-I $80.70 TG-100HJ2--I $ TG-120HJ2-I $4.80 TG-120HJ2-4-I $48.00 TG-120HJ2--I $ TG-150HJ2-I $45.0 TG-150HJ2-4-I $9.00 TG-150HJ2--I $1, TG-200HJ2-I $71.40 TG-200HJ2-4-I $1, TG-200HJ2--I $2, TG-250HJ2-I $ TG-250HJ2-4-I $1,29.90 TG-250HJ2--I $2, TG-250HJ2-I $ TG-250HJ2-4-I $1, LATHE CHUCKS LIVE CENTERS VISE ACCESSORIES STRAIGHT SHANK COLLET HOLDERS DRILL CHUCKS OD Height OAL Scroll Pinion Pinion Screw Wrenches For -Jaw s OAL ID Solid Hard Jaws For 4-Jaw s For -Jaw s OD Solid Hard Jaws Square Call Us Or Visit Our Website For Our Complete Selection! Length For 4-Jaw s I $ I $20.40 I $ I $ I $147.0 I $2.10 I $147.0 I $ I $15.0 I $ I $15.0 I $ I $ I $0.90 I $ I $ I $19.50 I $ I $19.50 I $ I $9.0 I $ I $9.0 I $ I $92.10 I $1,28.40 I $92.10 I $1, I $1, I $1, I $1, I $1,41.90 SPARE PARTS FOR 2, & 4-JAW CHUCKS For ison s With Semi-Steel ody Only.70 I $ I $40.50 I $ I $ I $ I $42.0 I $ I $ I $ I $51.0 I $ I $ I $ I $.00 I $ I $ I $ I $75.0 I $ I $ I $1, I $ I $ I $ I $2, I $11.40 I $ I $ MASTER CATALOG 85 CARIDE INSERTS THREADING/GROOVING CUTTING TOOLS MACHINERY PRECISION TOOLS DEURRING COOLANT/FLUIDS TOOL STORAGE

13 CHUCK JAWS RETENTION KNOS OIL COUNTRY CHUCKS 4 JAW INDEPENDENT CHUCKS Extra Heavy Duty-Forged Steel ody Extra Large - Two-piece master jaw style Includes mounting bolts, wrench eye bolts and 2 Allen keys -JAW OIL COUNTRY CHUCKS Self-Centering, Extra Heavy Duty Two-piece master jaw style chuck Large thru-hole Direct and indirect mounting Includes two-piece reversible hard jaws, wrench, mounting bolts and eye bolt Mount Wt A I $5,1.00 A I $5,1.00 D I $5,79.00 D I $5, A I $, A I $, D I $7, D I $7, A I $10,59.00 A I $10,59.00 A I $15,.00 A I $15,.00 D I $15,.00 A I $17, A I $17,1.00 A I $17, A I $29, Mount Wt A2-8* I $8,22.00 A2-11* I $8,22.00 A I $11, A2-15* I $12,72.00 A I $17,88.00 A2-20* I $18, A I $25, A I $25, *Indirect mount. All indirect mount chucks come with fully machined backplate. INDEXALE DRILLS TURNING & ORING LARGE ORE OIL COUNTRY CHUCKS 2 meter, & 4 Reversible Jaws Extra Large -hole Solid or semi steel body available Extra large thru hole Scroll and master jaws ground and hardened COMPLETE WORKHOLDING SOLUTIONS! ody Type, Master Jaws, JAW CHUCKS A2-11 Semi-Steel 50 T-2-25A211R $7, A2-15 Steel 78 T-1-25A215R $7, A1-20 Steel 18 T-1-25A120R $7, JAW CHUCKS A2-11 Semi-Steel 85 T-2-254A211R $4, A2-15 Steel 59 T-1-254A215R $4, A2-20 Steel 50 T-1-254A220R $4,15.00 D ARASIVES Manual and CNC chucks Collet chucks Replacement parts Swing lock chucks Adapter plates Threaded drawnuts-standard and extended length Hydraulic cylinders PLEASE CALL FOR MORE INFORMATION! MASTER CATALOG