ATLANTIC JIG BORER MODEL 4000
|
|
- Sara Jones
- 5 years ago
- Views:
Transcription
1 ATLANTIC JIG BORER MODEL 4000
2
3 THE MACHINE BUILT TO DO TOMORROW'S WORK TODAY! ATLANTIC JIG BORER MODEL 4000 No single feature makes one jig-borer better than another... it takes the proper balance of engineering, research, development and construction that goes into the ATLANTIC Engineered to meet today's wide range of demands for speed, efficiency, and dependability; with ample reserve to meet the unknown challenges of tomorrow... micro-tolerances for location, for boring, drilling and light milling operations... we have the experience... we have the machine... the ATLANTIC ATLANTIC JIG BORER MODEL Gets the work done properly, the first time, every time. Accuracy to within.0002" guarantees ultimate efficiency and accuracy, on jigs... fixtures... folds... dies... gages. Every manufacturing process requiring jig-boring in all kinds of metals and alloys... within capacity. No job too demanding for the ATLANTIC ATLANTIC JIG BORER MODEL 4000 Compare these advantages PRECISION - Accurately ground and honed quill of nitriding steel, hardened... spindle has two sets of preloaded super-precision bearings... double tapered spindle nose. Plus quick method of positioning " is ideal for inspection or machining of parts in any quantity. EASE OF OPERATION - Speed and feed pre-seletion from push buttons... all manual controls convenient from one operator's position. DESIGN - Positive powered spindle feeds and speeds, provide the correct settings for precision jig-boring, drilling and light milling operations... depending upon the required application. *Optional equipment and special units available. 3
4 SPECIFICATIONS Table and carriage manual operated Variable spindle feed 0-23 psr Counter balanced spindle head One shot lubrication Push button control panels Two digital optical projectors. Two scales Atlantic quick change spindle nose Machine is supplied with 1 H.P. spindle drive motor Hardened and ground precision lead screws in lieu of optical positioning available at extra cost. Table Working Surface.. Table Travel Longitudinal Table Travel Crosswise Spindle Quill Dia. Spindle Nose. Spindle Speeds Machine Accuracy Horsepower Spindle Feed Net Weight In Pounds. Shipping Weight 12" X 18" 1" 12" 215/1/'. Quick Shank Adjustable 100-2,100 RPM ±.0001" Squareness & Parallelism & 1f2 (Two Speed Motor) Variable Per Spindle Revolution 3,000 Lbs. 3,00 Lbs. z x. _ :E <{ :...,('o,j :E...,. - ~ 22" :: ~~ -o j... 1" 1-2 4
5 TABLE OF CONTENTS Page BORING CHUCK FOR 4000 MODEL _ , BORING BARS Sets A, B for 4000 Model 5 SPOTTING TOOLS With Straight Shank for 4000 Model DRILL CHUCKS With Straight Shank for 4000 Model STRAIGHT SHANK REAMER DRILLS Complete Set of 15 for 4000 Model STRAIGHT SHANK END REAMERS 3/s" and 1/2" Shank for 4000 Model WORK EDGE FINDER - COLLETS - COLLET FOR INDICATOR HOLDER ATLANTIC SHANK-. INDICATORS- MICROSCOPE - BACK PLATE -.. STEP BLOCKS AND CLAMPS SET ANGLE IRON - PRECISION VISE -. ACCESSORY TOOL CABINET CABINET - RISER BLOCK - JIG BORER ACCESSORIES BORING CHUCK Atlantic Precision Boring Chuck, complete %"hole, 3fa" adapter and accessories for boring holes from %" thru 5" in mahogany box. Atlantic Precision Boring Chuck with ~"hole and Ya" adapter Cat. No. 318.,319 BORING BARS SetA One each 3/1", %", 5/1", 1J1", %", 9/1", %" Dia. carbide tipped tool all with 3/a" shanks in wooden block 324 Set B One each 3il/', % ", 5/1", 1J1", V2 ", 9/1", % ", 3/.i ", and 1" dia. Carbide tipped tools all with %"shanks ir wooden block
6 STRAIGHT SHANK SPOTTING TOOLS 3 /a" Shank- 3" 0/ A Length: 1 /1", ~/', Ya", 5!32", 3!1" V2" Shank- 3%" 01 A Length: Ya", 3/1", %/', % ", %2" Complete Set of 10 Spotting Tools Cat. No. 335 DRILL CHUCKS 3/a" Precision drill chuck fitted with shank and key %"Precision drill chuck fitted with shank and key 3/a" Albrecht drill cnuck fitted with shank W' Albrecht drill chuck fitted with shank. STRAIGHT SHANK REAMER DRILLS " for Ya" Reamer %"Straight Shank 3~" 01 A Length.151" for {{' Reamer %" Straight Shank 3~" 0/ A Length.1825" for K/' Reamer %" Straight Shank 3%" 0/ A Length.213" for "YJ/' Reamer %" Straight Shank 3%" 0/ A Length.245" for ~" Reamer %"Straight Shank 4" 0/ A Length.25" for ~{' Reamer %"Straight Shank 4" 0/ A Length " for!}{/' Reamer %" Straight Shank 4" 0/ A Length.335" for 1 }-3' 2 " Reamer %" Straight Shank 4 ~~~ 01 A Length.35" for %" Reamer %"Straight Shank 4~" 0/ A Length.245" for ~" Reamer );2'' Straight Shank 5" 0/ A Length.35" for %" Reamer W' Straight Shank 5" 0/ A Length.39" for 1 ~ /' Reamer );2'' Straight Shank 5" 0/ A Length.425" for K/' Reamer );2'' Straight Shank 5" 0/ A Length.458" for 1 {{' Reamer );2'' Straight Shank 5" 0/ A Length.490" for W' Reamer );2'' Straight Shank 5" 0/ A Length Complete Set of 15 Reamer Drills STRAIGHT SHANK END REAMERS 1 11 Ya" >3'2 %" %{' %" )1" K" 1 ~/' %" '!{{' K" 1 11"" ~~~ 1{{' Ya" 350 ~{' ~~~ 1!jj/' !j{/' 'X/' 1 II Complete Set of 21 End Reamers with %"and );2'' Shank WORK EDGE FINDER Chair type with wooden box COLLETS Collet for %" diameter straight shank end reamers, Ya" to %" reamer sizes inclusive 35 Collet for );2'' diameter straight shank end reamer 1 ~/' to 1" reamer sizes inclusive 35 3 ){/' diameter collet for straight shank drills, 1 'YJ/' to 1" drill size inclusive 'Ki' diameter collet for straight shank drills, 1)1/' to 1 W' drill size inclusive 359 COLLET FOR INDICATOR HOLDER 31
7 ATLANTIC SHANKS Fitted to other makes of chuck. INDICATORS Last word indicator.001" dial Federal #5 indicator.001" dial, with special dovetail slide, dovetail clamp, and holding button Model #028 bestest indicator.0005" dial with clamp ring and holding button Dovetail clamp for federal indicators Indicators holder Edge Finder Center or line finder Mahogany box for indicator set. MICROSCOPE Locating microscope with adapter for Jig Borer Cat. No ,..._?. -.;;... '::. "!._, - ;=,, BACK PLATE Back locating plate or straight edge for back of table 32 STEP BLOCK & CLAMP SET Set consists of six 1" wide alum step blocks; six 1" wide steel step clamps; four %" studs of each length - 3", 4", 5", ", ", 8" ; six T nuts; four coupling nuts; four flanged nuts all in wooden box 380 ANGLE IRON Precision Angle Iron Working surface 5" high x 12" long x " wide with necessary bolts and nuts 381 PRECISION VISE 4~" opening mounted on ground base plate " opening mounted on ground base plate ACCESSORY TOOL CABINET Steel cabinet with double swing locking doors and shelves arranged to hold all listed accessories 385 CABINET Large mahogany desk type cabinet for housing all accessories with lock and key 38 RISER BLOCK 4" Riser block under column " Riser block under column
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationThe ultimate affordability in valve seat machining
The ultimate affordability in valve seat machining SG7 cylinder head seat & guide machine Light Weight Work Head The SG7 has a light weight work head for extremely fast and accurate centering for the ultimate
More information... TOOL CHANGES IN SECONDS
SPINDLEMASTER... TOOL CHANGES IN SECONDS BY NUMERICAL CONTROL Numerically controlled for every operation It drills, taps, bores, reams, mills Tape commands 1. Select any one of 0 tools 2. Position all
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationHM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More informationMH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column
MH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $2,290.00 $2,519.00 ORDER CODE: MODEL: Digital Readout: Type: Table
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationBF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column
BF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $1,690.00 $1,859.00 ORDER CODE: MODEL: Digital Readout: Type:
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationCATALOG " ke u(.g dul8 SOLD BY
CATALOG 1161 15" ke u(.g dul8 SOLD BY Here are the details of Clausing's exclusive-feature design and superior construction that assure unmatched accuracy and efficiency on every job. The Clausing head
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationInnovative woodworking machinery
MF30 Innovative woodworking machinery MOReTENs have been manufacturing woodworking machinery in Sweden for over 25 years. The innovative design of our machines is shaped by our customers needs, bringing
More informationMILLING MACHINE DIVISION
MILLING MACHINE DIVISION THE CINCINNATI MILLING MACHINE CO. CINCINNATI 9 OHIO I I MILLING MACHINES Toolmaster Milling Machines are available in four different styles: lb, 1 C, ld and 1 E; each having its
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More information15L Slant-PRO TM CNC LATHE
15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT
More informationPERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationAC 650. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp
AC 650 Cylinder boring machine A Company of ThyssenKrupp BERCO S.p.A. The machine and its functions Fig. 1 Fig. 2 Fig. 3 Precision, fast operation and reliability are the main features of the AC 650 and
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More information16" X 60" EVS TOOLROOM LATHES
16" X 60" EVS TOOLROOM LATHES MODEL SB1014-220V MODEL SB1015-440V SPECIFICATIONS Hundreds of Thousands of Lathes Sold With a Tradition of Quality Since 1906! March, 2010 by South Bend Lathe Co. For Machines
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationTurret Milling Machine Geared Head Horizontal - Vertical
Product Brochure M163D HAFCO METALMASTER HM-52G Turret Milling Machine Geared Head Horizontal - Vertical (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without
More informationHAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
More informationAxial Movement. Tailstock 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC CHUCKING SYSTEM EXTRA WIDE Z AXIS DESIGN OF 620MM
STANDARD FEATURES FANUC TXP-100FA CONTROL Spindle Features Body Structure POWERFUL 49 HP SPINDLE MOTOR RIGID 45 DEGREE SLANT BED 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department
Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationHAFCO METALMASTER AL-335F. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L681 HAFCO METALMASTER AL-335F Centre Lathe 300 x 910mm Turning Capacity Page 1 of 6 Front View Left View Headstock Spindle Speed Levers Control Panel Switches Feed and Thread Gearbox
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationPrecision & Heavy Duty Machining
High Speed Precision Lathes Large capacity, Powerful, Universal & Precision ATRUMP 18, 21 and 25" Series Lathes have just the right amount of engineering to afford simplicity of operation, coupled with
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationTU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox
TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):
More informationHAFCO METALMASTER AL-335. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L183 HAFCO METALMASTER AL-335 Centre Lathe 300 x 910mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L183.pdf Headstock Speed
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationRush Machinery, Inc. Specification- Model 382S series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/16 (5mm) to 3-1/8 (80mm) 2. Tool Shanks: Straight Shanks: 3/16 (5mm) to 3-1/8 (80mm) diameter Morse Taper Shanks: to #6
More informationCNC Mill Training System (Heavy Duty)
CNC Mill Training System (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3 List of Manuals
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationEMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationSTC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
More informationAffordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms.
1 of 5 23/10/2007 9:53 PM Affordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms Overview Standard Features DRO Specifications
More informationAhsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
More information1640DCL Digital Control Lathe
1640DCL Digital Control Lathe MACHINE SPECIFICATIONS Multiple Function CNC Lathe 1. Manual Hand wheel Operation 2. CNC G-Code Operation 16.1 swing over bed, 8.6 swing over cross-slide 2.05 diameter hole
More informationMachining Technology Equipment Purchases
Allegany College of Maryland Machining Technology Equipment Purchases Equipment Specifications Michael Chronister 11-8-2018 Michael Chronister Advanced Manufacturing Project Manager 12401 Willowbrook RD
More informationTU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $ $908.50
TU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $790.00 $908.50 ORDER CODE: L685 MODEL: TU-1503V Swing Over Bed (mm): 150 Distance Between
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationNEXT ARE (6) BLOCKS THAT MEASURE 7/8"+ (.885") THICK X 1-1/4"+ (1.255") TALL X 1-1/2" (1.500") LONG. SAME DRILL AND TAP PATTERN AS THE 4 ABOVE!!!
1"- 2" - 3" BLOCKS HAVE (4 total) TAPPED 1/4" X 20 in 1" thick face alone AND (2) TAPPED HOLES 3/8" X 16 IN 1" THICKNESS AS SHOWN. BLOCKS ALSO HAVE (6) DRILLED 25/64" HOLES WITH (8) 9/16" COUNTER-BORES
More informationMACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
More information~~---":..., - "',--::_- ~A"'"~
~~---":..., - "',--::_- ~A"'"~ Lathe Features To provide the quality and durability that CLAUSING owners expect, these lathes are engineered to the highest standards of performance, and are manufactured
More informationRush Machinery, Inc. Specification- Model 252 series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/32 (2.5 mm) to 2 (51 mm) 2. Tool Shanks: Straight Shanks: 3/32 (2.5mm) to 2 (51mm) diameter Morse Taper Shanks: to #5
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationCHAS. G. ALLEN CO. BARRE, MASS. DRILLING AND TAPPING MACHINE. Allen No. 2 single spindle 12" overhang, Type
No.2 V-BELT MOTOR DRIVE DRILLING AND TAPPING MACHINE Allen No. 2 single spindle 12" overhang, Type VMT, hand feed drilling machine with controls for semi-automatic reversing motor tapping. Machine equipped
More informationSwing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8"
MODEL KL1640 PLUS Swing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8" Spindle speed L:50-355 rpm, H:352-2500 rpm Spindle number 2 Spindle
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationINTERAPID Small Bench SHE.30 or SHE.35
0 to 0 mm Mobile measuring bolt mounted on a plain bearing, also fitted with a semi-circular releasing disc plate. Measuring inserts supplied in pairs. One is tighten on the measuring bolt, the other on
More informationDrawbars for Milling Machines
Machine Tool & Drawbars for Milling Machines Made in USA Drawbars from low carbon steel, soft and black oxide plated. Drawbars are manufactured from two parts the shaft and the hex. Drawbars for Milling
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationDRILLING MACHINE B 17P/B23P/B26P/B33P. B17 P. Key Features and Benefits
www.toptechmachine.cn DRILLING MACHINE B 17P/B23P/B26P/B33P Cast iron construction designed for maintenance shops and production applications Spindle designed with precision ball bearings and aluminum
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for General Motors LS V8 Page 1 of 5 Kit Contents: 2x End Plates 2x Threaded Adjustment Sleeves 1x Front Angle Bracket 2x M10-1.5 x 65 Hex Head Bolts * 2x Angle Adapter Blocks
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationMACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1
MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round
More informationDUGARD EAGLE. Mega Slant and Mega Turn Heavy Duty CNC Lathes
DUGARD EAGLE Mega Slant and Mega Turn Heavy Duty CNC Lathes Dugard Eagle SS and SA Series Machine Features 60 for SA-Series, 45 for SS-Series slant bed construction ensures maximum stability and convenient
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationI 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More information1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
More informationInTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
More information