Rotaplay Rock 'n' Bowl
|
|
- Kimberly Powers
- 5 years ago
- Views:
Transcription
1 Rotaplay Rock 'n' Bowl PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT Ø065mm x 820mm High 2-0 Years 920mm.5 Kg 05 Kg SPECIFICATION Solid steel components made from steel to BS 970 Part (983) Tubing made from medium Nominal Bore Tube to BS 387 Standard fasteners are plated and made to one of the following specifications:- BS 3692 (697), BS 90 (967) Non-standard fasteners are corrosion resistant and designed to deter vandals Welds are from copper free wire to BS EN 0 (995) Metal parts coated with low lead polyester paint to BS EN 7 part 3 (995) INSTALLATION INSTRUCTIONS. Read instructions thoroughly before commencing installation of unit. 2. Excavate foundations as shown on the foundation plan. 3. Position the below ground fixing in the prepared hole, ensuring that it is vertical and at the correct height.. Backfill with concrete ( parts gravel, 2 parts sand & part cement). 5. Allow concrete to set for a period of 8 hours. 6. Once foundations have set, position the bearing unit and attach to below ground fixing. Make sure bearing unit cover is in position before fixing down to ground fixing. Ensure that all fasteners are fully tightened. Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE! Page of 8
2 Foundation Detail (Care must be taken in abnormal conditions) Wetpour Wetpour Safety Surfacing Concrete foundation Below ground fixing (20-539) 800 Brick 50 Bark Bark Safety Surfacing Concrete to be rounded off 00 Bark Concrete foundation Below Ground Fixing (Bark) (20-560) Brick Page 2 of 8
3 Free Space Fixing Details For Maintenance Bowl To Bearing M8 x 25mm C'sk Skt HD Screw Bowl Cover Panel M2 x 25mm C'sk Skt HD Screw Bowl Assembly Bearing Unit Page 3 of 8
4 Fixing Details For Maintenance Bearing To Ground Fixing Bearing Unit M2 x 30mm Skt Cap HD Screw c/w Pin BOLT MUST BE SPECIFIED LENGTH ONLY! M2 Spring Washer M2 Plain Washer Below ground fixing to be concreted in to ground 8 hours prior to attaching bearing assembly. Shown here for clarity purposes only. Below Ground Fixing Page of 8
5 Fixing Details For Maintenance Bearing Assembly Page 5 of 8
6 Safety Surfacing Wetpour 2 Sq. meters 0mm wetpour 7.5 Linear meters wetpour edging n5500 Bark 8.2 Linear meters edging Page 6 of 8
7 Safety Surfacing Grass Mats 22 No. m x.5m Wicksteed grass mats Page 7 of 8
8 M2 x 25 SKT HD CAP SCREW M8 x 25 C'SK SKT HD SCREW M2 x 25 C'SK SKT HD SCREW M2 Spring Washer M2 Plain Washer Bowl Cover Panel Bowl Roundabout Assembly Below Ground Fixing Assembly M6 Nord Lock Washer M0 x 25 Pent Button Head ITEM 8 QTY PART NUMBER Ø70mm Washer External Circlip Ø50mm M6 x 0 SKT HD CAP SCREW RHP-SNP50 Self Lubricating Bearing O-RING 2.0 I/D x 5.0 BEARING SPACER RING BEARING UNIT COVER SEAL RING SEATING FLANGE M8 x 25 Pent Button Head SPHERICAL CASTING m/c SEATING FLANGE FABRICATION SPHERE & SEATING FLANGE BEARING CARRIAGE R-About Bearing Unit DESCRIPTION Parts List For bark safety surfacing item 2 is: COMPILED DATE: 03/2/0 REV ECN SIG. DATE: /2/0 Minor 2/02/ /03/ 3 Minor 07// Minor 8/0/2 5 6 Minor Minor MC MC 27/0/2 02/07/2 7 Minor 2/0/6 Page 8 of 8
9 DESPATCH LIST Sheet of Product: Rock 'N' Bowl Roundabout Date of Issue: 0/2/0 Order No: Issue: A Item Unit Qty Description Part No. Checked R/BOUT BEARING UNIT * BOWL R/BOUT ASSY * BELOW GROUND FIXING ASSY BOWL COVER PANEL * ITEMS MARKED * TO BE FITTED PRIOR TO DESPATCH Total No. of Items Picked By: Checked By: COMPILED REV BY: ECN No Minor Minor DATE 0/2/200 2/03/20 2/06/20 27/0/202 DATE: 0/2/0 SIGN MC
10 FIXINGS LIST Sheet of Product: Rock 'N' Bowl Roundabout Date of Issue: 0/2/0 Order No: Issue: A Item Unit Qty Description Part No. Checked M2 x 25 C'SK SKT HD SCREW * M8 x 25 C'SK SKT HD SCREW * M2 x 30 SKT HD CAP SCREW c/w Pin M2 PLAIN WASHER M2 SPRING WASHER M2 ALLEN KEY FOR ANTI VANDAL CAP SCREW ITEMS MARKED * TO BE FITTED PRIOR TO DESPATCH Total No. of Items Picked By: Checked By: COMPILED REV BY: ECN No Minor Minor DATE 0/2/200 2/03/20 2/06/20 27/0/202 DATE: 0/2/0 SIGN MC
11 DESPATCH LIST Sheet of Product: Rock 'N' Bowl Roundabout - Bark Date of Issue: 0/2/0 Order No: Issue: A Item Unit Qty Description Part No. Checked R/BOUT BEARING UNIT * BOWL R/BOUT ASSY * BELOW GROUND FIXING ASSY - BARK BOWL COVER PANEL * ITEMS MARKED * TO BE FITTED PRIOR TO DESPATCH Total No. of Items Picked By: Checked By: COMPILED REV 0 2 BY: ECN No. 623 Minor Minor DATE 0/2/200 2/06/20 27/0/202 DATE: 0/2/0 SIGN MC
12 Product: Order No: FIXINGS LIST Rock 'N' Bowl Roundabout - Bark Date of Issue: Issue: A Item Unit Qty Description Part No. M2 x 25 C'SK SKT HD SCREW * M8 x 25 C'SK SKT HD SCREW * M2 x 30 SKT HD CAP SCREW c/w Pin M2 PLAIN WASHER M2 SPRING WASHER M2 ALLEN KEY FOR ANTI VANDAL CAP SCREW ITEMS MARKED * TO BE FITTED PRIOR TO DESPATCH Total No. of Items Picked By: Checked By: COMPILED REV 0 2 BY: ECN No. 623 Minor Minor DATE 0/2/200 2/06/20 27/0/202 DATE: 0/2/0 SIGN MC
INSTALLATION INSTRUCTIONS
ROTAPLAY PROD CODE: 6070-811 SIZE: Dia. 1642mm x 970mm AGE RANGE: 2-5 YEARS DELIVERY LIST Part No. Description Qty 6070-811 Sputnik Fully Assembled 1 FREE FALL HEIGHT: FALLING SPACE: WEIGHT OF HEAVIEST
More informationAGILITY. ROTA WEB CLIMBER 3.3m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT ROTAWEB33. 8 TO mm 73kg 115kg
AGILITY ROTA WEB CLIMBER.m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT Dia. m x.m High 8 TO 4 00mm 7kg 5kg SPECIFICATION Centre Upright: Made from 6" diameter aluminium tube to
More informationYOUNG EXPLORER TECHNICAL DATA HILLARY INSTALLATION DETAILS HILLA PROD. CODE L:11.25 W:4.55 H:2.8 SIZE FFH 2.2M 6-11 YEARS OLD AGE RANGE
YOUNG EXPLORER HILLARY TECHNICAL DATA MINIMUM SPACE REQUIRED 14.25M X 8.15M PROD. CODE HILLA SUPERVISED PLAY RECOMMENDED SIZE L:11.25 W:4.55 H:2.8 EQUIPMENT TYPE HIGH LEVEL FFH 2.2M LARGEST PART 2.3M X
More information32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationAllow 60 from door face
Setbacks Allow 60 from door face TOOLS NEEDED Tape Measure Marker or Pencil Masonry Drill Bit 3/8 Hammer Drill Hammer Socket Wrenches and Wrench: 9/16, 1/2, 7/16, 1/4 drive socket wrench and 1/2 socket
More informationINSTALLATION INSTRUCTIONS
LANDCRUISER 100 SERIES CARGO BARRIER - REAR POSITION ONLY Installation Instructions GXL V8, GXL TD, SAHARA August 05 onward- Accessory Part No. 608825 Installation Time: Approx 1 hr Place these Instructions
More informationKU-BAND FEED INSTALLATION OMT INTERFACE
Revision D April 22, 2016 Assembly Manual KU-BAND FEED INSTALLATION OMT INTERFACE General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com KU-BAND
More informationOrchard Monkey Bars Installation Instructions ORU060/ORW060
Orchard Monkey Bars Installation Instructions ORU060/ORW060 Page 1 Monkey Bars Installation Instructions 1 Read all instructions carefully before starting the assembly. 2 Check using the parts list and
More informationOnyx 90 Media Cutter. Parts Manual
Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationInstallation Instructions
EZ Launch Accessible Transfer System Installation Instructions Models 500900L, 500900R, 500901L, 500901R 500890, 500906L, 500906R For questions about features, operation/performance, parts, accessories
More informationOperating Instructions For Lockformer Button Punch Flanger
Capacity: 20 to 28 Gauge Galvanize Operating Instructions For Lockformer Button Punch Flanger To satisfactorily form the 90º button punch flange on light gauge materials, it was necessary to form the metal
More informationOWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More information1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM
August 21, 1997 Revision D ASSEMBLY MANUAL 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM PRODELIN CORPORATION 1700 NE CABLE DRIVE CONOVER, NC 28613-0368 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM D
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 1 DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 2 DYNAPOWER MODEL 4.8
More information" PLUG AERATOR. Model No. Safety Assembly Operation Maintenance Parts. CAUTION: Read Rules for Safe Operation and Instructions Carefully
owner s manual Model No. 45-0383 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com
More informationHILGARD Part Number Spectrum Lane ~ Missoula MT ~
HILGARD Part Number 20121 7100 Spectrum Lane ~ Missoula MT 59808 800.791.8056 ~ www.spectrumproducts.com 20121 Rev A You have purchased a Spectrum Products Hilgard Guard Chair. Providing the unit is installed
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More information40670 Transit Connect/NV200/City Express/ProMaster City Partition
40670 Transit Connect/NV200/City Express/ProMaster City Partition Top Panel (1) Bottom Panel (1) Transit Connect (2014) Top Angle (1) TC Top MNT BRKT (2) TC Bottom MNT PLT (2) NV200/City Express Top Mount
More informationSecure Bike Parking. Patent Pending Dero
VE LO P O RT Secure Bike Parking The graceful lines and modern laser-cut design makes the Veloport stand out while still offering the security and durability you need in your long-term bike parking. Each
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationSC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
More informationOWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100
OWNER S MANUAL XXL-60 L 11 W 6 H 100 XXL-60 SUPER RACK/SMITH MACHINE XXL-60 / XXL-1 L 1 W 1 H 100 AMERICA S PREMIER XXL SUPER RACKS XXL-60 Rev0 Revision Date -1-07 COLOR CHART GRAY= SUB-ASSEMBLY PARTS
More informationWK2 Rear Tie Downs. Install Instructions. Begin Trim Removal IMPORTANT
Page REF QTY DESCRIPTION REF QTY DESCRIPTION A B C D E 4 4 Tie-Down Bracket Tie-Down Fixture M6 x 0mm.9 Bolts (Zinc) M6 x 30mm.9 Bolts (Zinc) M6 Wedge-Lock Washer F - - Flanged Nut 4g Anti-Seize Pouch
More informationKaterack Wagon Shelving System
Ford Transit Connect Assembly Installation Instructions Sheet 1 of 14 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationC-15 Truck Engine 9NZ00001-UP(SEBP ) - Document Structure. Media Number -RENR Publication Date -01/07/2008 Date Updated -22/07/2008
Page 1 of 8 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: C-15 TRUCK ENGINE 9NZ Configuration: C-15 Truck Engine 9NZ00001-UP Disassembly and Assembly C-15, C-16 and C-18 Truck Engines Media
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More information1.8 METER SERIES 1184 ANTENNA SYSTEM
REVISION F January 10, 2002 ASSEMBLY MANUAL 1.8 METER SERIES 1184 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1184 ANTENNA SYSTEM F Revised Address 1/10/02
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More information4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
More information**MOUNTING YOUR MONITOR
FPP72V200 72 FREE STANDING DISPLAY CART Assembly Instructions Hardware List Ref. Qty. Part No. Description AA 4 030-1128 1/4-20 UNC, 1 3/4 Socket Hd Screws BB 1 030-1129 5/8-11 UNC 1 3/4 Socket Hd Screw
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationPortable System Owners Manual
Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationPneumatic Clamp Carrier. Installation & Operation Manual
Pneumatic Clamp Carrier Installation & Operation Manual Pneumatic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationToll Free: INSTALLATION MANUAL. Copyright 1996 Revision 1 November 2004
Toll Free: 1-800-563-4382 INSTALLATION MANUAL Copyright 1996 Revision 1 November 2004 WWW.TRUSTRAM.COM SECTION 1 - SITE PREPARATION 1.1 The Trus-T-Lift elevator requires a solid, smooth, and level mounting
More informationSTONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationWK2 Rear Tie Downs. Install Instructions. Begin Trim Removal IMPORTANT
Page REF QTY DESCRIPTION REF QTY DESCRIPTION A B C D E 4 4 Tie-Down Bracket Tie-Down Fixture M6 x 0mm.9 Bolts (Zinc) M6 x 30mm.9 Bolts (Zinc) M6 Wedge-Lock Washer F - - Flanged Nut 4g Anti-Seize Pouch
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationInstallation Instructions
Installation Instructions Playworld Systems Model XX1407 Square Picnic Table w/coated Top & Frame Installation Preparation Recommended Crew:...Two (2) adults Installation Time:...1 man-hour Assembly View
More informationThe Virgo/Libra Steam Engine
The Virgo/Libra Steam Engine Congratulations on becoming the owner of a Virgo or Libra Steam Engine. With careful use and maintenance it will give many years of satisfying performance. Contents 1) Notes
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationInstallation Instructions: JK Inner Fender Liners Part Number(s): & Ratchet 3/8 & 7/16 Sockets. Plastic Clip Removal Tool
Page 1 of 5 Proudly Made In USA Installation Instructions: JK Inner Fender Liners Part Number(s): 400.300.170 & 400.300.180 Vehicle Fitment: 2007 - Present Jeep Wrangler & Unlimited Parts List Qty: 1 Driver
More informationG0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
More informationTuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
More informationINSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM
INSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will
More informationPneumatic Clamp Carrier. Installation & Operation Manual
Pneumatic Clamp Carrier Installation & Operation Manual Pneumatic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More informationPSM-144X SMITH MACHINE. Owner s Manual
SMITH MACHINE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationEXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM
RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple
More informationTuf-Lite III Fans K Hi Temp 3000KHT Series Hub
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationGLGS100 & OWNER S MANUAL V. GLGS
GLGS100 Assembly & Instructions OWNER S MANUAL V. GLGS100-102914 W a r n i n g, S a f e t y & M a i n t e n a n c e Be sure that all users carefully read and understand all warning, safety and maintenance
More informationTuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationCamaro License Plate Frame Bracket, V8
PART #59389 2010-11 Camaro License Plate Frame Bracket, V8 PACKING LIST Before installation, use this checklist to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More information19" EIA Wall Mount Swing Rack Installation Instructions
19" EIA Wall Mount Swing Rack Installation Instructions (UL609501 SR Series Equipment Rack) WeRackYourWorld.com 1-866-TRY-GLCC (879-4522) PREFACE This manual is provided to prevent service personnel from
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More informationSPRING MOTOR MD: SERIES 439I2 &44567 CAUTION: DO NOT ALLOW THE CENTER OF A SPRING TO BE PULLED FROM THE COIL. FORM: SM E1 DATE: MAY 15, 1978
SPRING MOTOR MD: FORM: SM0088-03E1 DATE: MAY 15, 1978 SERIES 439I2 &44567 CAUTION: All springs are potentially dangerous and must be handled with care. If it is necessary to disassemble the spring motor,
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
More informationPost & Rail Crossbuck
Post & Rail Crossbuck 1. Getting Started 6. Crossbuck Be sure to call underground prior to digging Assemble gates (if necessary) and decide where they will be located Stake out the fence line Space and
More informationCabonyx Installation Manual
Cabonyx Installation Manual Content Deck-Nyx and Plan-Nyx Installation Page 1 Flooring Products Page 1 Accessories Page 1 Installation Tools Page 2 Preparing Sub-structure Page 2 Installation Page 4 Cautions
More informationInstallation Guide 40670
Installation Guide 40670 Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: Installation Instructions 40670 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationSuper Tube Spiral Slide Instructions
Super Tube Spiral Slide Instructions Super Tube Spiral Slide 2 SECTIONS WITH OVERLAPPING FLANGES 3 SECTIONS WITHOUT OVERLAPPING FLANGES 3-1/2 LAG SCREW W/WASHER 5/16 X 1 BOLT W/WASHERS AND LOCK NUT 5/16
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationMounting of poles and foundations Rette produkt Til rette opgave
Mounting of poles and foundations Rette produkt Til rette opgave 12/04/2018 Burying and mounting poles General When mounting poles, the door of the pole must always match the specific pole, with which
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationDi-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationINSTALLATION INSTRUCTIONS AND PARTS LIST MODEL , O-MEGA II 6 OVAL STEPS
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL 583036, 584036 O-MEGA II 6 OVAL STEPS 1. READ INSTRUCTIONS COMPLETELY AND CHECK TO MAKE SURE THAT ALL REQUIRED PARTS (LISTED ON THE SERVICE PARTS LIST) ARE
More informationOperating Instructions
Operating Instructions Holding the material against the angle gauge slide it into the forming head. Be sure that the material remains against the gauge until work is finished. NOTE: This machine will handle
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationOWNERS MANUAL. Model No UTILITY CART
OWNERS MANUAL Model No. 45-00 UTILITY CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts PRINTED IN USA FORM NO. 46274 LOOSE PARTS IN CARTON
More informationSIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
More informationSatNOGS. SatNOGS Rotator v3 Mechanical Assembly. This is the assembly guide for the third version of the SatNOGS Rotator.
SatNOGS SatNOGS Rotator v3 Mechanical Assembly This is the assembly guide for the third version of the SatNOGS Rotator. Written By: Pierros Papadeas 2017 satnogs.dozuki.com Page 1 of 19 INTRODUCTION Notes:
More information15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
More informationIIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationTerminus TM CEN End Terminal
Product/Installation Manual Corporate Offices: 35 East Wacker Dr., 11 th Floor Chicago, IL 60601-2076, USA Tel: +1 (312) 467-6750 Fax: +1 (312) 467-1356 http://www.energyabsorption.com/ Quixote Europe
More informationAttachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
More informationLAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
More informationPSC-43X. Owner s Manual SEATED CALF RAISE
SEATED CALF RAISE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationMedium Flat Panel Universal Interface Bracket (MSB-V)
INSTALLATION Medium Flat Panel Universal Interface Bracket () INSTRUCTIONS The interface bracket functions as the universal mounting solution for medium flat panel displays. The is compatible with a multitude
More informationINSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
More information