3000, 4000, 4100, 7500, 7700

Size: px
Start display at page:

Download "3000, 4000, 4100, 7500, 7700"

Transcription

1 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators J. P. Hennessy Drive, LaVergne, TN USA / / Manual No.: HENNESSY INDUSTRIES INC. Manufacturer of AMMCO, COATS and BADA Automotive Service Equipment and Tools. Revision: 03/11

2 s Identification Table of Contents Electrical Panel Assembly Main Frame Assembly Spindle 3000, 4000, 4100, & Variable Drum Feed Gearbox Assembly 3037-B Motor Mount and Drive Shaft Disc Brake Feed Mechanism 7751-B Twin Cutter Twin Cutter & Safety Sheild Crossfeed Assemlby Spindle s Identification The following pages include full parts breakdowns with exploded view illustrations to help with ordering replacement or spare parts. Assemblies are noted where it is recommended that individual parts not be ordered separately. These parts are available only as assemblies because some parts are staked, pinned, or press fitted, then drilled, machined, or bored. Close tolerances must be maintained in assembly. Every effort is made to supply accurate exploded views, however, due to interim changes in manufacturing operations, some units may not be exactly as illustrated. 2 AMMCO Drum & Disc Brake Lathes

3 s Identification Electrical Panel Assembly 110 V (Austrialian Only) Ground Black 15 Green Black White Black White (Green/Yellow) Australian Only 15 AMP Circuit Breaker (Brown) Australian Only (Blue) Australian Only Black Main Switch Black WIRING SCHEMATIC 12 Green Black White Motor A Black (Brown-Aust.) OFF 14 ON CAUTION SHUT OFF LATHE BEFORE RESETTING BREAKER. 11 MOTOR SPECS VOLTS 9 Green (Green/Yellow-Aust.) 8 / 7 White 12 Green White (Blue-Aust.) Black White Wrap With Electrical Tape 2 Turns Min. Motor Cord & A-5637 Wire Nut Ref. From Main Assy 6 13 Motor Power Cord PHASE H.P.: Hz: MTR AMPS: IF CONNECTED TO A CIRCUIT PRO- TECTED BY FUSES. USE TIME-DELAY FUSES WITH THE APPLICANCE. WARNING A 12 / Electrical Panel Lamp Assembly Lamp Assembly (Austrialian Only) Cord Set, 110 V Cord Set, 220 V Cord Set (Austrialian Only) Clamp Strap Tinnerman Nut AMP Circuit Breaker Selt-Tapping, #6 Screw Lock Washer Bushing Round Head Machine Screw Set Screw Cord Grip, 110 V Cord Grip, 220 V Cord Grip,(Austrialian Only) Switch, 110 V Switch, 220 V Switch Plate Black Wire Assembly Electrical Caution Tag Screw, Drive Knock-out Adapter Reset Decal 220 V AMMCO Drum & Disc Brake Lathes 3

4 s Identification Main Frame Assembly Spindle 3000, 4000, 4100, & AMMCO Drum & Disc Brake Lathes

5 s Identification Nut, Arbor Arbor Ring, Retaining Ring, Adapter Boot Seal, Oil Ring, Oil Seal Adapter Washer, Thrust Spindle Body, 3000/ Spindle Body, 4100/ Key, Drive Screw, Socket Head Cap Screw, Cuppoint Set Quill, Drive, 3000/ Washer, Lock, 3000/ Screw, Hex Hd. Cap, 3000/ Quill, Drive, 4100/ Screw, Flat Hd., 4100/ Block, Keyway, 4100/ * Shim (0.005 THK) * Shim ( THK) Nut, Lead Screw, 4000/ Nut, Lead Screw, 4100/ R Rear Flange Assy., 3000/ R Rear Flange Assy., 4100/ Screw, Skt. Hd. Cap, 3000/ Screw, Skt. Hd. Cap, 4000/ Nut, Take Up Screw, Skt. Hd. Set Ring, Boot, 4000/ Spring, Boot, 3000/ Clamp, Front Plug, Brass Knob Screw, Skt. Hd. Cap, 4000/ Rod, Lock Clamp, Rear, Lower Clamp, Rear, Upper Screw, Skt. Hd. Cap Screw, Set Drawbar & Nut Assy., 3000/ Drawbar & Nut Assy., 4100/ Boot & Spring, 3000/ Boot & Spring, 4100/ B Feed Mechanism, 3000/ Feed Mechanism, 4100/7700 * Quantity as Required AMMCO Drum & Disc Brake Lathes 5

6 s Identification Variable Drum Feed Gearbox Assembly 3037-B 6 AMMCO Drum & Disc Brake Lathes

7 s Identification Screw, Allen Set Feed Dial Assembly Ring, Retaining Bearing, Thrust Screw, Feed Adjusting Gear Case Assembly Pin, Groove Gear Case Cup, Bearing Spindle Extension Assembly Bearing, Taper Roller Spindle Extension Pin, Groove Shut-Off Assy, 3000/ Shut-Off Assy, 4100/7500/ Collar, Stop Screw, Knurled Plug, Brass * Clutch Shifter Assembly Screw, Allen Set Key, Hy-Pro * Clutch Handle And Shaft Assy. * Feed Control Lever and Differential Assembly Roller Pinion Bushing Assy. * Driven Friction Disc and Bearing Assembly Screw, Dog Point Set Gear, Miter Screw, Socket Hd. Cap Washer Washer, Wave Nut, Stop Screw, Allen Set Nut, Bearing Lock Washer, Spherical Gear Case Cover Assembly Pin, Dowel Washer, Bone Fiber Shaft Screw, Set * Handwheel Assembly Handle, Crank Lead Screw and Clutch Assembly 3000/ Lead Screw and Clutch Assembly 4100/7500/ Ball, Steel * Lead Screw/Miter Gear Assembly 3000/ Lead Screw/Miter Gear Assembly 4100/7500/ Spring, Clutch Gear, Sliding Clutch Ring, Retaining Clutch Jaw Spring, Coil Cup, Spring Loading Friction Disc Assy Ring, Retaining Washer Spring, Belville Disc, Sliding Friction Clutch, Fixed Friction *Sold as assembly only. AMMCO Drum & Disc Brake Lathes 7

8 s Identification Motor Mount and Drive Shaft 8 AMMCO Drum & Disc Brake Lathes

9 s Identification O-Ring Screw, Hex Hd. Cap Washer, Lock Motor/Brkt Assy. 115V/230V, 60hz, 1Ph Motor/Brkt Assy. 230V, 50hz, 1Ph Pulley, Drive, 3000/4000** Pulley, Drive, 4100/7700** 6A Pulley, Drive, Poly-V** Set Screw, 3000/4000/7500** Set Screw, 4100/7700** Shaft, Motor Mount Lever, Belt Tension Pin, Eccentric Belt Release Lever Belt Release Assy Handle, Belt Release Knob, Ball Screw, Socket Hd. 15 * Washer, Wave (*Qty As Required) Bushing, Motor Mount Shaft Nut, Hex Plug, Welch Ring, Retaining I.D Cup, Bearing Bearing, Cone Plug, Allen Pipe Fitting, Grease C Shaft, Worm W/Square Key 25 * Shim, 0.005" (*Qty As Required) * Shim, 0.007" (*Qty As Required) * Shim, 0.020" (*Qty As Required) Cap And Seal Assy Cap, Bearing Seal Seal, Oil Pulley W/Pin & Tube** 29A Pulley W/Pin & Tube, Poly-V** Pin, Groove, 4000/ Tube, Rubber, 4000/ V-Belt, 3000,4000** V-Belt, 4100/7700** Poly V-Belt** Screw, Hex Hd. Cap Key, Square Key, Woodruff (older models) Sleeve, Oil Filler Dipstick Nut, Self-Locking Guard, Belt, 3000/ Guard, Belt, 4000/4100/ Panel Assy., Electrical Screw, Set** Key, Square * Kit, Poly-V-Belt * Kit, Standard V-belt, 4100 * Not Shown ** Check your unit to see if it uses the 3-groove pulley and standard V-belt or the 2-groove pulley and poly V-belt. Order the pulley, set screw, and V-belt that matches your unit. AMMCO Drum & Disc Brake Lathes 9

10 s Identification Disc Brake Feed Mechanism 7751-B ** ** 10 AMMCO Drum & Disc Brake Lathes

11 s Identification Gear Case Assembly Screw, Socket Head Washer, Lock Case, Gear 4 1 * Drive Rod and Coupling Assy. * Universal Coupling Assy. * Coupler * Pin, Roll Rod, Drive Pin, Dowel Washer, Thrust Trap Gear, Drive Washer, Bone Shim Shifter Shaft Assy Gear, Helix Pin, Roll Ring, Retaining Shaft, Clutch Ring, Retaining Key, Woodruff Gear, Fine Feed Clutch Gear, Coarse Feed Shaft, Shift Gear Case Cover and Tube Assy Tube Screw, Socket Hd. Cap Washer Screw, Socket Hd. Cap Cap, Tube Screw, Hex Hd. Machine Screw, Hex Hd. Machine Plate, Index Screw, Round Hd. Machine Shifter Handle Assy Pin, Shifter Handle Washer Spring Body, Shifter Handle Knob, Ball Screw, Set ** Driven Assy., Right Angle Drive Worm Drive Assy. * Worm Shaft Repair Kit * C Clip * Washer, Travel Bearing, Needle Thrust Housing, Drive Bushing, Oilite * Worm Drive Assy Screw, Cone Point Set ** Shear Gear And Ring Assy Plug, Dot Coupling Assy Ring, Retaining Spacer And Bushing Assy Coupling And Gear Assy Pin, Roll Shim, Shim, Shim, Shim, Shifter & Intermediate Gear Assy Screw, Cap Lead Screw Nut Kit *Sold as assembly only. CAUTION ** The metal face gear can only be used in conjunction with lathes equipped with a circuit breaker located on the electrical panel. The plastic shear gear can be used on lathes with or without the circuit breaker. Failure to follow these instructions may lead to minor personal injury or product or property damage. AMMCO Drum & Disc Brake Lathes 11

12 s Identification 6950 Twin Cutter * Carbide Insert, Positive Rake ** Carbide Insert, Negative Rake Screw, #4-40 X.25 Oval Head * Holder, Tool Bit, RH, Positive Rake * Holder, Tool Bit, LH, Positive Rake ** Holder, Tool Bit, RH, Neg. Rake ** Holder, Tool Bit, LH, Neg. Rake Screw, Square Head Set Tool Holder, Left Hand Tool Holder, Right Hand Gib, Brass, Tool Holder Screw, Lock Twin Cutter Housing Spring Screw, Locating Nut, Hex Plug, Dot Screw, 3/16-16 Set Rod, Dial Plug, Dial Washer, Spring Dial, Micrometer Screw, Set Knob, Dial Rod Dial Assembly Shield Assembly Note: These parts are not included with the 6950 Twin Cutter tool. For a complete assembly, order one of the following: *28800 twin cutter with positive rake tool holders and bits. **29800 twin cutter with negative rake tool holders and bits. Not Shown 12 AMMCO Drum & Disc Brake Lathes

13 s Identification 7900 Twin Cutter & Safety Shield Support, Tool Bar Bolt, T Washer, Flat Spring, Compression Nut/Washer, Hex, Self-Align, Assy Clamp Assy Clamp Screw, Pan Hd., Machine Shield Assy Screw, Retainer Bracket Insert, Nut Shield Decal, Safety Bar, Tool, RH, Assy Screw, Oval Hd., Machine Bit, Carbide, Package Of Holder Sleeve Washer, Flat Screw, Shoulder Bar, Boring Ring, Retaining, External Washer, Wave Dial, Micrometer Rod, Dial Screw, Set, Cup Point Dial, Depth Bar, Tool, LH, Assy Holder Band, Silencer, HD, Assy. AMMCO Drum & Disc Brake Lathes 13

14 s Identification Cross Feed Assembly Models 4000, 4100 & 7500 Only Cross Feed Assembly Nut/Washer, Hex, Self-Align, Assy Nut, Locking Retainer Washer Clamp, Boring Bar, Upper (Except 7500) Clamp, Boring Bar, Lower (Except 7500) Stud, Boring Bar Crossfeed Race Crossfeed Handwheel Assembly, 4000/ Crossfeed Handwheel Assy, Screw, Set Dial Spring, Dial Handwheel, 4000/ Handwheel, Crank, Handwheel /2-20 Nut Washer Key Screw, Set Spring Plug Lock Screw Plug Bearing, Needle Thrust Lead Screw Assembly Boring Bar, Boring Bar, Crossfeed Boot Bar, Guide Set Screw B Gearbox Assy., 4000/4100/ Screw, Cap 4000/4100/ Screw, Cap 3000/ Cap, Lead Screw, 3000/7000/ Nut, 3000/ Toolbit Package Model 7500 Only 14 AMMCO Drum & Disc Brake Lathes

15 s Identification Spindle Nut, Arbor Arbor Seal, Oil Spindle And Gear Assy. *5A Spindle Gear *5B Roll Pin Spacer Bearing Shim Flange, Rear Screw Washer, Lock Nut, Lock Drawbar AMMCO Drum & Disc Brake Lathes 15

16 /11 Copyright 2001 Hennessy Industries and AMMCO All Rights Reserved Printed in USA

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

EEBR312A Brake Lathes Parts Identification

EEBR312A Brake Lathes Parts Identification EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference

More information

3850, Drum & Disc Brake Lathes. Parts Identification

3850, Drum & Disc Brake Lathes. Parts Identification 3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

6000, Heavy Duty Drum/Disc Lathe. Parts Identification

6000, Heavy Duty Drum/Disc Lathe. Parts Identification 6000, 6002 Heavy Duty Drum/Disc Lathe Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

700/705/710. Vehicle Mounted Brake Lathe & Rotor Driving Unit. Parts Identification

700/705/710. Vehicle Mounted Brake Lathe & Rotor Driving Unit. Parts Identification 700/705/710 Vehicle Mounted Brake Lathe & Rotor Driving Unit READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine

More information

4000SP Drum & Disc BRAKE LATHE

4000SP Drum & Disc BRAKE LATHE 4000SP Drum & Disc BRAKE LATHE Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions with Parts Identification READ these instructions before placing unit in service.

More information

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar

More information

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * * -I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()

More information

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000 FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR

More information

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com

More information

SECTION 9: PARTS Column Breakdown

SECTION 9: PARTS Column Breakdown SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60

More information

SECTION 9: PARTS. Accessories

SECTION 9: PARTS. Accessories SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY

More information

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4

More information

SECTION 9: PARTS. Table & Column Breakdown

SECTION 9: PARTS. Table & Column Breakdown SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE

More information

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130

More information

SECTION 9: PARTS Headstock Case and Shift

SECTION 9: PARTS Headstock Case and Shift SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709

More information

SECTION 9: PARTS. Accessories

SECTION 9: PARTS. Accessories SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY

More information

12. Mechanical Drawings & Parts Breakdown List

12. Mechanical Drawings & Parts Breakdown List 12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

More information

SECTION 10: PARTS. Headstock

SECTION 10: PARTS. Headstock 33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)

More information

MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT

MODEL G0760 8 X 29 MILL/DRILL w/stand & POWER FEED MANUAL INSERT MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

Headstock Gear System

Headstock Gear System Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105

More information

SECTION 9: PARTS. Accessories 2-1

SECTION 9: PARTS. Accessories 2-1 SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY

More information

Section A Gear Box September A

Section A Gear Box September A Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000

More information

GEAR HEAD METAL LATHE

GEAR HEAD METAL LATHE GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF

More information

BASE, COLUMN, ARM AND TABLE

BASE, COLUMN, ARM AND TABLE SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the

More information

Column & Stand. -4- Model G0759 (Mfd. Since 1/14)

Column & Stand. -4- Model G0759 (Mfd. Since 1/14) Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY

More information

PARTS G9729 Lathe Bed

PARTS G9729 Lathe Bed PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131

More information

SECTION 10: PARTS. Headstock

SECTION 10: PARTS. Headstock 33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001

More information

MODEL NO.: MI PARTS BREAKDOWN

MODEL NO.: MI PARTS BREAKDOWN MODEL NO.: MI-76350 PARTS BREAKDOWN MAGNUM DRILL PRESS ASSEMBLY INSTRUCTIONS MODEL MI-76350 Before you begin to assemble your drill press, review the parts breakdown and keep it ready for reference. Start

More information

Disc, Belt, and Combination Disc/Belt Sanders

Disc, Belt, and Combination Disc/Belt Sanders This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc

More information

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins

More information

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise

More information

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2 Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73

More information

SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List

SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008

More information

SECTION 9: PARTS. Headstock

SECTION 9: PARTS. Headstock SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1

More information

SECTION 9: PARTS Main Breakdown

SECTION 9: PARTS Main Breakdown SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun

More information

488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7

More information

HD38, HD58, HD78 REV

HD38, HD58, HD78 REV HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869

More information

SECTION 9: PARTS Cabinet & Base

SECTION 9: PARTS Cabinet & Base SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370

More information

IMPORTANT: Chuck guard MUST be installed before drill chuck!

IMPORTANT: Chuck guard MUST be installed before drill chuck! IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A

Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A (GHB-1340A shown with optional stand 321443AK) For Parts List and Electrical Diagrams, see document M-321357A

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

ST1014 PARTS ST1014 Headstock Breakdown

ST1014 PARTS ST1014 Headstock Breakdown ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1

More information

535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS

More information

Illustrated Parts: Model 853

Illustrated Parts: Model 853 Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3

More information

MODEL RA-2500N RADIAL ARM SAW

MODEL RA-2500N RADIAL ARM SAW 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22

More information

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

Headstock Cover PARTS. For Machines Mfg. Since 5/ REF PART # DESCRIPTION REF PART # DESCRIPTION

Headstock Cover PARTS. For Machines Mfg. Since 5/ REF PART # DESCRIPTION REF PART # DESCRIPTION Headstock Cover 1 2 3 4 1 PSB10490001 HEADSTOCK OIL FILL CAP 3 PSB10490003 HEADSTOCK TOP COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 PSB10490004 TOP COVER GASKET -95- For Machines Mfg. Since 5/11 Headstock Controls

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 SLIDING COMPOUND MITER SAW PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135

More information

INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts...

INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts... R Ingersoll HOME TRACTORS 52SD, 62SD and 72SD INDEX 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts... 3 Pulleys, Blades, Belts, Spindles and Attaching Parts... 5 62SD Mower Deck

More information

PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A

PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59

More information

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040 Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com

More information

Headstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION

Headstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31

More information

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1

More information

Parts List for Type 1

Parts List for Type 1 1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118

More information

Di-Acro 18E Stylus Turret Punch Press

Di-Acro 18E Stylus Turret Punch Press OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of

More information

Model G " Planer/Moulder -33- G0477 Body Breakdown

Model G  Planer/Moulder -33- G0477 Body Breakdown Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186

More information

MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT

MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other

More information

SECTION 9: PARTS G7945/G7946

SECTION 9: PARTS G7945/G7946 SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33

More information

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13

More information

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015

More information

11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1

11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.

More information

SECTION 9: PARTS Main

SECTION 9: PARTS Main SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21

More information

SECTION 9: PARTS Stand/Brake/Coolant Pump

SECTION 9: PARTS Stand/Brake/Coolant Pump SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36

More information

These are tricks or tips I use when working on a Mill These are intended for informational purposes only and not responsible for any injury or damage to the machine Removal of motor on a variable speed

More information

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer

More information

Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH

Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204

More information

PARTS LIST: Air Control Assembly (1632 Sander)

PARTS LIST: Air Control Assembly (1632 Sander) PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27B PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service

More information

Trick-Tools 75 Truman Road Pella, IA Phone:1-877-VAN-SANT

Trick-Tools 75 Truman Road Pella, IA Phone:1-877-VAN-SANT Distributed by: Trick-Tools 75 Truman Road Pella, IA 50219 Phone:1-877-VAN-SANT E-mail: sales@trick-tools.com Here at Trick Tools we believe that our customers deserve the best value in their tool and

More information

EDP# Model 26 MAINTENANCE INSTRUCTIONS AND PARTS LIST. Better By . :;]- ~, Iiii. McMINNVILLE, TENNESSEE D AC

EDP# Model 26 MAINTENANCE INSTRUCTIONS AND PARTS LIST. Better By . :;]- ~, Iiii. McMINNVILLE, TENNESSEE D AC EDP# 040 Model MAINTENANCE INSTRUCTIONS AND PARTS LIST Better By Design@). :;]- ~, Iiii McMINNVILLE, TENNESSEE 70 D AC 5-47-555 PARTS LIST: Stand & Table ITEM PART ITEM PART NO. NO. DESCRIPTION IOTY. NO.

More information

NEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.

NEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD. NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0

More information

MODEL RA-200N RADIAL ARM SAW

MODEL RA-200N RADIAL ARM SAW ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL

More information

Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine

Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)

More information

SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2

SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2 SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee

More information

J-3-D PART NO DATE:

J-3-D PART NO DATE: 37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET

More information

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156

More information

Parts Catalog Collector 34 Model Gasoline

Parts Catalog Collector 34 Model Gasoline Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1

More information

Base Machine Breakdown

Base Machine Breakdown SECTION 9: PARTS Base Machine Breakdown 154 151 10 149 8 180 9 11 152 148 12 6 146 153 23 150 7 144 4 147 142 181 2 140 100 139 145 1 143 36 14 141 19 15 182 31 137 16 32 18 13 3 34 16 19 17 41 41 50 38

More information

HEADSTOCK (CASTNG & CONTROLS)

HEADSTOCK (CASTNG & CONTROLS) HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR

More information

for GH-1340W/1440W Lathes

for GH-1340W/1440W Lathes PARTS LIST and Electrical Diagrams for GH-1340W/1440W Lathes See manual no. M-321810 for operating and maintenance instructions. WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee

More information

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model: , 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.

More information

SECTION 9: PARTS G0513/G0513P/G0513ANV

SECTION 9: PARTS G0513/G0513P/G0513ANV SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37

More information

SECTION 9: PARTS G0453Z

SECTION 9: PARTS G0453Z parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738

More information

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List. 25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1

More information