Parasitically Powered Digital Input
|
|
- Kevin Bradford
- 5 years ago
- Views:
Transcription
1 EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. General Description The is an IEC compliant, industrial digital input (DI) device that translates a 24V digital industrial input to a 2.4mA (typ) current for driving optical isolators. Voltage thresholds and current levels in the are compliant with Type 1 and Type 3 inputs, while minimizing power dissipation. The is also compliant with 48V inputs, with the addition of external resistors. Operating power is derived from the input signal, eliminating the need for an external field-side power supply. A 250ns (max) fast response time is ideal for high-speed inputs. Additionally, a CMOS-compatible test input is available for safety diagnostics. The features robust functionality for harsh industrial systems and is capable of normal operation with input signals ranging from -60V to +60V. Integrated thermal shutdown further protects the device when V CC is present. The is available in a small, 6-lead SOT23 package and operates over the -40 C to +125 C ambient temperature range. Applications Process Automation Industrial Automation Motor Controls Individually Isolated Inputs Current Sourcing Inputs Benefits and Features High Integration for Flexible Circuit Designs 250ns (max) Response Time Parasitically Powered from the Field Input Current Sourcing Input with Optical Isolators Current Sinking Input with Optical Isolators Current Sinking Input with Logic Devices Test Pulse Input Reduced Power and Heat Dissipation Current Limited Input Robust Design Operates from -60V to +60V Input Voltage -40 C to +125 C Ambient Operating Temperature Ordering Information appears at end of data sheet. Simplified Block Diagram 2.3mA T REF ; Rev 0; 12/17
2 Absolute Maximum Ratings (All voltages referenced to, unless otherwise stated) V CC V to +6V...-70V to +60V V to +6V (3.0V V CC 5.5V) V to (V CC + 0.3V) (V CC = 0V) V to min [(V + 0.3V), +6V] (3.0V V CC 5.5V) V to (V CC + 0.3V) (V CC = 0V) V to min [(V + 0.3V), +6V] Short-Circuit Duration to...continuous Continuous Power Dissipation (T A = +70 C) 6L SOT23 (derate at 8.7mW/ C above +70 C)...696mW Operating Temperature Range Ambient Temperature C to +125 C Junction Temperature C Storage Temperature Range C to +150 C Lead Temperature (soldering, 10s) C Soldering (reflow) C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Thermal Characteristics (Note 1) 6L SOT23 Junction-to-Ambient Thermal Resistance (θja) Multilayer Board C/W Junction-to-Case Thermal Resistance (θjc) Multilayer Board...80 C/W Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to DC Electrical Characteristics V = 0V to 60V, V CC = 0V, T A = -40 C to +125 C, unless otherwise noted. Typical values are at V = 24V, = 40.2kΩ (±1%), and T A = +25 C. (Notes 2, 3) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS DIGITAL PUT () Functional Operating Range V _F V Voltage Upper Threshold V THU is high Voltage Lower Threshold V THL is low Current Low I L state, R EXT = V = 7V, steady 40.2kΩ, V = 3V V CC = 0V V V CC 5.5V (Note 5) V CC = 0V 7 3.0V V CC 5.5V (Note 5) V CC = 0V 1.5 ` 3.0V V CC 5.5V (Note 5) Boost Current I B V < V THU (Note 4) ma Current High I H steady state, R EXT = 40.2kΩ, V = 10V to 36V, V = 0V to 3V PUT () V CC = 0V V V CC 5.5V (Note 5) Load Voltage V Load on is an LED 0 3 V High Current I H V = 0.5V to 3V, V = 10V ma Low Current I L V < V THL, V = 0V μa Voltage High V OH 3.0V V CC 5.5V, I LOAD = 1mA (Note 5) V CC V V ma ma V Maxim Integrated 2
3 DC Electrical Characteristics (continued) V = 0V to 60V, V CC = 0V, T A = -40 C to +125 C, unless otherwise noted. Typical values are at V = 24V, = 40.2kΩ (±1%), and T A = +25 C. (Notes 2, 3) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS Voltage Low V OL 3.0V V CC 5.5V, I SK = 1mA (Note 5) 0.4 V AUXILIARY POWER SUPPLY (V CC ) Auxiliary Power Supply Range V CC (Note 6) V V CC = 3.0V Auxiliary Power Supply Current I CC V CC = 5.5V PUT Input High Threshold V H 3.0V V CC 5.5V (2/3)V CC V V CC = 0V V V CC 5.5V V CC /3 Input Low Threshold V L V CC = 0V 1.3 Input Pulldown Resistance R PD 250 kω PROTECTION Thermal Shutdown Threshold T SHDN (Note 7) 160 C Thermal Shutdown Hysteresis T SHDN_HYS 23 C ESD (All Pins) Human Body Model ±2 kv μa V Maxim Integrated 3
4 AC Electrical Characteristics V = 0V to 60V, V CC = 0V, T A = -40 C to +125 C, unless otherwise noted. Typical values are at V = 24V, = 40.2kΩ (±1%), and T A = +25 C. (Note 2) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS to Low-to-High Propagation Delay to High-to-Low Propagation Delay t PDLH t PDHL C L = 15pF, Figure 1 C L = 15pF, Figure 1 V CC = 0V, R L = 1.5kΩ V CC = 3.0V, R L is open V CC = 0V, R L = 1.5kΩ V CC = 3.0V, R L is open to Propagation Delay Jitter C L = 15pF, RMS jitter, Figure ps to Propagation Delay Skew, Part-to-Part Propagation Delay t SKEWP2P C L = 15pF, Figure 1 (Note 5) V CC = 0V or 3V, V = 11V V CC = 0V, R L = 1.5kΩ, 3.0V V CC 5.5V, R L is open low to high, high to low high to low, low to high Note 2: All units are production tested at T A = +25 C. Specifications over temperature are guaranteed by design and characterization. Note 3: All voltages are referenced to ground, unless otherwise noted. Note 4: See the Boost Current section for more information. Note 5: Not production tested. Guaranteed by design Note 6: V CC is an auxiliary supply input. When V CC is powered from an external 3V to 5.5V supply, the propagation delay is reduced and the output changes from a current souce to a CMOS output. When using power from to power the device, connect V CC to (V CC = 0V). Note 7: Thermal shutdown protection is only enabled when V CC is present. Thermal shutdown does not occur when = 0V ns ns ns μs Maxim Integrated 4
5 RL CL V tpdlh VTHU 90% VTHL tpdhl 0V + - I 10% 0mA Figure 1. Propagation Delay Test Circuit and Timing Diagram Typical Operating Characteristics (V = 24V, = 40.2kΩ (±1%), RL = 1.5kΩ on, T A = +25 C, unless otherwise noted.) CURRENT (ma) CURRENT vs. VOLTAGE (V CC = 0V) toc01 T A = +25ºC T A = +125ºC VOLTAGE (V) V CC = 0V R L = 1.5kΩ T A = -40ºC CURRENT (ma) CURRENT vs. VOLTAGE (V CC = 3.3V) toc02 T A = +125ºC T A = +25ºC VOLTAGE (V) V CC = 3.3V R L = 1.5kΩ T A = -40ºC CURRENT (ma) PUT AND PUT CURRENT vs. PUT VOLTAGE I, FALLG I, FALLG I, RISG I, RISG toc VOLTAGE (V) 10.0 UPPER VOLTAGE THRESHOLD vs. TEMPERATURE toc LOWER VOLTAGE THRESHOLD vs. TEMPERATURE toc CURRENT vs. TEMPERATURE toc V = +30V V THU (V) V THL (V) CURRENT (ma) TEMPERATURE (ºC) TEMPERATURE (ºC) TEMPERATURE (ºC) Maxim Integrated 5
6 Typical Operating Characteristics (continued) (V = 24V, = 40.2kΩ (±1%), RL = 1.5kΩ on, T A = +25 C, unless otherwise noted.) CURRENT (µa) 5 CURRENT vs. TEMPERATURE toc07 4 V = -30V TEMPERATURE (ºC) CURRENT (ma) AND CURRENT vs. RESISTANCE CURRENT CURRENT 0.5 V = 24V R EXT (Ω) toc08 PROPAGATION DELAY (ns) PROPAGATION DELAY vs. TEMPERATURE (V CC = 0V) toc09 PULSED FROM 0V-24V TEMPERATURE (ºC) t PDLH t PDHL PROPAGATION DELAY (ns) PROPAGATION DELAY vs. TEMPERATURE (V CC = 3.3V) toc10 PULSED FROM 0V-24V NO LOAD ON TEMPERATURE (ºC) t PDLH t PDHL PROPAGATION DELAY (ns) PROPAGATION DELAY vs. VOLTAGE (V CC = 0V) toc11 t PDLH t PDHL VOLTAGE (V) PROPAGATION DELAY (ns) PROPAGATION DELAY vs. VOLTAGE (V CC = 3.3V) toc12 NO LOAD ON t PDLH VOLTAGE (V) t PDHL Maxim Integrated 6
7 Pin Configurations TOP VIEW SOT23-6 Pin Description P NAME FUNCTION 1 2 Ground 3 4 Digital Input. Connect directly to the input signal. Connect suitable TVS between and for surge protection. Reference Current Resistor Connection. Connect an external 40.2kΩ (±1%) resistor between and. Test Pulse Input. When is high, toggle from low-to-high to verify that toggles from high-to-low. 5 V CC the device from a local power supply, connect V CC to a 3.0V to 5.5V source. Bypass V CC to Auxiliary Supply Input. For a parasitically powered circuit, connect V CC to. To power with a 1μF capacitor when powered from a local supply. 6 Output Signal. Connect to the anode of an optical LED, or to the input of a digital circuit. Maxim Integrated 7
8 Detailed Description The features an integrated current source, voltage comparator, and current steering network to create an input load compliant with IEC Type 1 and Type 3 24V DC inputs, while generating a drive current for opto-isolators that turn-on/-off in compliance with the voltage thresholds of the standard. The addition of external voltage-dropping resistors also allows the to operate with 48VDC inputs (see the Typical Operating Circuits). Power-Up/Power-Down As the input voltage (V) rises, the transitions through three phases of operation: Phase 1: V is rising but is inadequate to fully power the current source or voltage comparator. Any current that does flow into the is diverted to through the internal current steering switches, bypassing the optical isolator. Phase 2: V continues to increase to a level that is adequate to power the comparator and the current source, but the input voltage threshold has not been reached. The output of the internal current source continues to be diverted to. Phase 3: V exceeds the comparator threshold (V THU ), and the current is switched to the pin. If connected to an external optical isolator, the current passes through the LED and returns to the negative field input. As V drops, the phases are reversed. The internal current source is switched from to when V falls below the lower voltage threshold (V THL ). Boost Current To allow for a faster response time, the includes a boost current, IB, during power up. The boost current is used to set and stabilize the output current while the voltage on is rising (V < V THU ). When V > V THU, and the output current is enabled, the input current is the sum of both the output current and boost current (I B + I H ) for a short period before the output current is steady at 2.3mA (typ). Integrated Diagnostic () Input The features an integrated input for easy diagnostic checks. When is high, toggle from low-to-high to verify that toggles high-to-low. See Table 1. The current on is not affected during this diagnostic test. When is low, has no effect on, it remains low. Applications Information Powering the With the V CC Pin The can be powered parasitically from a digital input or from an external power supply. To power the device parastically, connect V CC to. In this configuration, power is derived from the signal on the pin. To power the device from a local power supply, connect V CC to a source between 3.0V and 5.5V. When V CC is powered, the output () changes from a current source to a CMOS output and the propagation delay from to is reduced. Layout Considerations Place the 40.2kΩ (±1%) resistor as close to the pin as possible. Too much distance between the resistor and the IC can create unwanted input current overshoots/ undershoots. Table 1. Mode Functionality < V THL Low Low < V THL High Low V THU Low High V THU High Low Maxim Integrated 8
9 Typical Operating Circuits 24V CURRENT SKG PUT 24V PROXIMITY SENSOR/ SWITCH SMAJ33CA 40.2kΩ T REF 2.3mA VDD MICROCONTROLLER 24V CURRENT SOURCG PUT 24V SMAJ33CA 40.2kΩ T REF 2.3mA VDD MICROCONTROLLER PROXIMITY SENSOR/ SWITCH Maxim Integrated 9
10 Typical Operating Circuits (continued) 48V CURRENT SKG PUT PROXIMITY SENSOR/ SWITCH 48V 1.5kΩ MELF SMAJ58CA 1.2kΩ 40.2kΩ T REF 2.3mA VDD MICROCONTROLLER REDUNDANT PUT WITH SIGNALS AND CMOS PUTS VDD PROXIMITY SENSOR/ SWITCH SMAJ33CA 40.2kΩ T REF 2.3mA GPO MICROCONTROLLER 1 24V VDD 40.2kΩ T REF 2.3mA GPO MICROCONTROLLER 2 Maxim Integrated 10
11 Chip Information PROCESS: BiCMOS Ordering Information PART TEMP RANGE P-PACKAGE AUT+ -40 C to +125 C 6 SOT23 +Denotes a lead(pb)-free/rohs-compliant package. T = Tape and reel. Package Information For the latest package outline information and land patterns (footprints), go to Note that a +, #, or - in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE LE NO. LAND PATTERN NO. 6-SOT23 U Maxim Integrated 11
12 Revision History REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 12/17 Initial release For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim Integrated s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc Maxim Integrated Products, Inc. 12
MAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationAutomotive Temperature Range Spread-Spectrum EconOscillator
General Description The MAX31091 is a low-cost clock generator that is factory trimmed to output frequencies from 200kHz to 66.6MHz with a nominal accuracy of ±0.25%. The device can also produce a center-spread-spectrum
More information60V, 50mA, Ultra-Low Quiescent Current, Linear Regulator
General Description The MAX17651 ultra-low quiescent current, high-voltage linear regulator is ideal for use in industrial and batteryoperated systems. The device operates from a 4V to 60V input voltage,
More informationHigh-Voltage Switch for Wireless Power
General Description The MAX20304 is a DPST switch intended for wirelesspower-circuit applications. The new application for the portable device is the magnetic card reader. There has been a method to use
More information315MHz/433MHz Low-Noise Amplifier for Automotive RKE
EVALUATION KIT AVAILABLE MAX2634 General Description The MAX2634 low-noise amplifier (LNA) with low-power shutdown mode is optimized for 315MHz and 433.92MHz automotive remote keyless entry (RKE) applications.
More informationCompact 6A Smart Power Path Selector
EVALUATION KIT AVAILABLE MAX14713 General Description The MAX14713 compact 6A smart power path selector features a low, 11mΩ (typ) R ON internal FET and provides the system power from two separate power
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationMAX14883E CAN Transceiver with ±60V Fault Protection and Selectable Polarity
EALUATION KIT AAILABLE MAX14883E CAN Transceiver with ±6 General Description The MAX14883E fault-protected, high-speed Control Area Network (CAN) transceiver is optimized for industrial network applications.
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationPrecision, Low-Power and Low-Noise Op Amp with RRIO
MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and
More information60V High-Speed Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high
More informationNanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages
EVALUATION KIT AVAILABLE MAX47 General Description The MAX47 is a single operational amplifier that provides a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationSequencing/Supervisory Circuits
Click here for production status of specific part numbers. MAX1652/MAX1653 General Description The MAX1652/MAX1653 are a family of small, low-power, high-voltage monitoring circuits with sequencing capability.
More informationin SC70 Packages Features General Description Ordering Information Applications
in SC7 Packages General Description The MAX6672/MAX6673 are low-current temperature sensors with a single-wire output. These temperature sensors convert the ambient temperature into a 1.4kHz PWM output,
More informationMAX15070A/MAX15070B 7A Sink, 3A Source, 12ns, SOT23 MOSFET Drivers
General Description The /MAX15070B are high-speed MOSFET drivers capable of sinking 7A and sourcing 3A peak currents. The ICs, which are an enhancement over MAX5048 devices, have inverting and noninverting
More informationMAX2687 MAX2689 MAX2694. MAX2687 MAX2694 L1 = 4.7nH C1 = 100nF C2 = 10pF. MAX2689 L1 = 5.8nH C1 = 100nF C2 = 10pF
EVALUATION KIT AVAILABLE MAX27/MAX29/MAX29 General Description The MAX27/MAX29/MAX29 low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim s advanced
More information45V, 400mA, Low-Quiescent-Current Linear Regulator with Adjustable Reset Delay
EVALUATION KIT AVAILABLE MAX587 45V, 4mA, Low-Quiescent-Current General Description The MAX587 high-voltage linear regulator operates from an input voltage of 6.5V to 45V and delivers up to 4mA of output
More informationUltra-Small, nanopower, Window Comparator in 4 UCSP and 5 SOT23
EVALUATION KIT AVAILABLE MAX965 General Description The MAX965 is an ultra-small, low-power, window comparator ideal for a wide variety of portable electronics applications such as cell phones, portable
More informationTransimpedance Amplifier with 100mA Input Current Clamp for LiDAR Applications
EVALUATION KIT AVAILABLE MAX4658/MAX4659 Transimpedance Amplifier with 1mA Input General Description The MAX4658 and MAX4659 are transimpedance amplifiers for optical distance measurement receivers for
More information1.9GHz Power Amplifier
EVALUATION KIT AVAILABLE MAX2248 General Description The MAX2248 single-supply, low-voltage power amplifier (PA) IC is designed specifically for applications in the 188MHz to 193MHz frequency band. The
More information2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming
EVALUATION KIT AVAILABLE MAX16819/MAX16820 General Description The MAX16819/MAX16820, step-down constantcurrent high-brightness LED (HB LED) drivers provide a cost-effective solution for architectural
More information±50V Isolated, 3.0V to 5.5V, 250kbps, 2 Tx/2 Rx, RS-232 Transceiver MAX3250
EVALUATION KIT AVAILABLE MAX325 General Description The MAX325 is a 3.V to 5.5V powered, ±5V isolated EIA/TIA-232 and V.28/V.24 communications interface with high data-rate capabilities. The MAX325 is
More informationRegulators with BIAS Input
General Description The MAX15027/ low-dropout linear regulators operate from input voltages as low as 1.425V and deliver up to 1A of continuous output current with a typical dropout voltage of only 75mV.
More informationMAX3280E/MAX3281E/ MAX3283E/MAX3284E ±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23 RS-485/RS-422 True Fail-Safe Receivers
General Description The are single receivers designed for RS-48 and RS-4 communication. These devices guarantee data rates up to Mbps, even with a 3V power supply. Excellent propagation delay (1ns max)
More informationnanopower, Tiny Supervisor with Manual Reset Input
General Description The MAX16140 is an ultra-low-current, single-channel supervisory IC in a tiny, 4-bump, wafer-level package (WLP). The MAX16140 monitors the V CC voltage from 1.7V to 4.85V in 50mV increments
More informationUltra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
More informationMAX8863T/S/R, MAX8864T/S/R. Low-Dropout, 120mA Linear Regulators. General Description. Benefits and Features. Ordering Information.
General Description The MAX8863T/S/R and low-dropout linear regulators operate from a +2.5V to +6.5V input range and deliver up to 12mA. A PMOS pass transistor allows the low, 8μA supply current to remain
More informationHigh-Precision Voltage References with Temperature Sensor
General Description The MAX6173 MAX6177 are low-noise, high-precision voltage references. The devices feature a proprietary temperature-coefficient curvature-correction circuit and laser-trimmed thin-film
More information±15kV ESD-Protected, 10Mbps, 3V/5V, Quad RS-422/RS-485 Receivers
Click here for production status of specific part numbers. MAX395/MAX396 eneral Description The MAX395/MAX396 are rugged, low-power, quad, RS-422/RS-485 receivers with electrostatic discharge (ESD) protection
More informationLow-Power, Precision, 4-Bump WLP, Current-Sense Amplifier
EVALUATION KIT AVAILABLE General Description The is a zero-drift, high-side current-sense amplifier family that offers precision, low supply current and is available in a tiny 4-bump ultra-thin WLP of
More informationDual-Channel, High-Precision, High-Voltage, Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX44285 General Description The MAX44285 dual-channel high-side current-sense amplifier has precision accuracy specifications of V OS less than 12μV (max) and gain error less
More informationLow-Power, Single/Dual-Voltage μp Reset Circuits with Capacitor-Adjustable Reset Timeout Delay
General Description The MAX6412 MAX6420 low-power microprocessor supervisor circuits monitor system voltages from 1.6V to 5V. These devices are designed to assert a reset signal whenever the supply voltage
More informationDefibrillation/Surge/ESD Protector
MAX334 General Description The MAX334 is a patent-pending protection device intended to (with the help of external, energy-rated resistors) absorb repetitive defibrillation and other high-energy pulses
More informationSmall 1A, Low-Dropout Linear Regulator in a 2.7mm x 1.6mm Package
EVALUATION KIT AVAILABLE MAX15101 General Description The MAX15101 is a small, low-dropout linear regulator optimized for networking, datacom, and server applications. The regulator delivers up to 1A from
More informationHigh-Accuracy μp Reset Circuit
General Description The MAX6394 low-power CMOS microprocessor (μp) supervisory circuit is designed to monitor power supplies in μp and digital systems. It offers excellent circuit reliability by providing
More informationDS1091L Automotive Temperature Range Spread-Spectrum EconOscillator
General Description The is a low-cost clock generator that is factory trimmed to output frequencies from 130kHz to 66.6MHz with a nominal accuracy of ±0.25%. The device can also produce a center- or down-dithered
More informationLVDS/Anything-to-LVPECL/LVDS Dual Translator
19-2809; Rev 1; 10/09 LVDS/Anything-to-LVPECL/LVDS Dual Translator General Description The is a fully differential, high-speed, LVDS/anything-to-LVPECL/LVDS dual translator designed for signal rates up
More informationMAX9812/MAX9813 Tiny, Low-Cost, Single/Dual-Input, Fixed-Gain Microphone Amplifiers with Integrated Bias
General Description The MAX982/MAX983 are single/dual-input, 20dB fixed-gain microphone amplifiers. They offer tiny packaging and a low-noise, integrated microphone bias, making them ideal for portable
More informationLow-Voltage, Precision, Single/Dual/Triple/ Quad-Voltage μp Supervisors
EVALUATION KIT AVAILABLE MAX16132 MAX16135 General Description The MAX16132 MAX16135 are low-voltage, ±1% accurate, single, dual, triple, and quad-volt age μp supervisors that monitor up to 4 system-supply
More informationHigh-Voltage, 350mA, Adjustable Linear High-Brightness LED Driver
High-Voltage, 5mA, Adjustable Linear General Description The current regulator operates from a 6.5V to 4V input voltage range and delivers up to a total of 5mA to one or more strings of high-brightness
More informationLow-Voltage, Precision, Single/Dual/Triple/ Quad-Voltage μp Supervisors
General Description The MAX16132 MAX16135 are low-voltage, ±1% accurate, single, dual, triple, and quad-volt age μp supervisors that monitor up to 4 system-supply voltages for undervoltage and overvoltage
More informationMAX9647/MAX9648 General-Purpose, Low-Voltage, Tiny Pack Comparators
EVALUATION KIT AVAILABLE MAX9647/MAX9648 General Description The MAX9647/MAX9648 comparators are drop-in, pin-forpin compatible replacements for the LMX331/LMX331H. The MAX9648 has the added benefit of
More informationPART TEMP RANGE PIN-PACKAGE
General Description The MAX6922/MAX6932/ multi-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface a VFD tube to a microcontroller or a VFD controller, such as the MAX6850 MAX6853.
More informationDS1135L 3V 3-in-1 High-Speed Silicon Delay Line
3V 3-in-1 High-Speed Silicon Delay Line FEATURES All-Silicon Timing Circuit Three Independent Buffered Delays Stable and Precise Over Temperature and Voltage Leading and Trailing Edge Precision Preserves
More informationTwo-Channel, 2.75kV I 2 C Isolator
EVALUATION KIT AVAILABLE General Description The is a two-channel, 2.75kV I2C digital isolator utilizing Maxim s proprietary process technology. For applications requiring 5kV of isolation, refer to the
More information±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver
General Description The MAX3053 interfaces between the control area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. It is primarily intended for industrial systems requiring
More informationUltra-Small, Ultra-Thin, 4-Bump Op Amp
EVALUATION KIT AVAILABLE MAX4428 General Description The MAX4428 is the industry s first op amp in a 4-bump WLP package, designed for use in portable consumer and medical applications. This device is offered
More informationTwo Channel, 5kV RMS I 2 C Isolator
EVALUATION KIT AVAILABLE MAX14937 General Description The MAX14937 is a two-channel, 5kV RMS I2C digital isolator utilizing Maxim s proprietary process technology. For applications requiring 2.75kV RMS
More informationSpread-Spectrum Crystal Multiplier
General Description The MAX31180 is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs from 16MHz to 134MHz. The device is
More information76V, APD, Dual Output Current Monitor
9-4994; Rev ; 9/ EVALUATION KIT AVAILABLE 76V, APD, Dual Output Current Monitor General Description The integrates the discrete high-voltage components necessary for avalanche photodiode (APD) bias and
More information0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information
.5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally
More informationHigh-Voltage, 3-Channel Linear High-Brightness LED Driver with Open LED Detection
EVALUATION KIT AVAILABLE General Description The three-channel LED driver operates from a 5.5V to 40V input voltage range and delivers up to 100mA per channel to one or more strings of highbrightness (HB
More informationSetup Period. General Description
General Description The MAX6443 MAX6452 low-current microprocessor reset circuits feature single or dual manual reset inputs with an extended setup period. Because of the extended setup period, short switch
More informationGPS/GNSS Front-End Amplifier
EVALUATION KIT AVAILABLE MAX2678 General Description The MAX2678 GPS/GNSS front-end amplifier IC is designed for automotive and marine GPS/GNSS satellite navigation antenna modules, or for any application
More informationnanopower Op Amp in a Tiny 6-Bump WLP
EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features
More informationI/O Op Amps with Shutdown
MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered
More informationQuad Fault-Protected RS-485/RS-422 Receiver with Fault Detection
General Description The MX14891E quad fault-protected RS-485/RS-4 receiver is ideal for applications requiring high data rates and reduced noise in rugged environments. Each receiver features a wide common-mode
More informationDS1080L. Spread-Spectrum Crystal Multiplier. General Description. Features. Applications. Ordering Information. Pin Configuration
General Description The DS80L is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs from 16MHz to 134MHz. The device is pin-programmable
More informationUltra-Small, Adjustable Sequencing/ Supervisory Circuits
General Description The MAX6895 MAX6899 is a family of small, lowpower, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold
More informationMAX4914B/MAX4915A/B/ 100mA/200mA/300mA Current-Limit Switches MAX4917A/B with Low Shutdown Reverse Current General Description Benefits and Features
General Description The MAX4914B/MAX4915A/B/ family of switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These analog switches have a low 0.2Ω
More information±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23 RS-485/RS-422 True Fail-Safe Receivers
19-3; Rev 1; 3/11 ±1kV ESD-Protected Mbps, 3V to.v, SOT3 General Description The MAX38E/MAX381E/MAX383E/MAX384E are single receivers designed for RS-48 and RS-4 communication. These devices guarantee data
More informationDual 1:5 Differential LVPECL/LVECL/HSTL Clock and Data Drivers
19-2079; Rev 2; 4/09 Dual 1:5 Differential LPECL/LECL/HSTL General Description The are low skew, dual 1-to-5 differential drivers designed for clock and data distribution. These devices accept two inputs.
More informationLow-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
More informationSingle/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
19-1803; Rev 3; 3/09 Single/Dual LVDS Line Receivers with General Description The single/dual low-voltage differential signaling (LVDS) receivers are designed for highspeed applications requiring minimum
More information40MHz to 4GHz Linear Broadband Amplifiers
MAX26 MAX26 0MHz to GHz Linear Broadband Amplifiers General Description The MAX26 MAX26 is a family of high-performance broadband gain blocks designed for use as a PA predriver, low-noise amplifier, or
More informationMAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs
General Description The MAX965/MAX9651 are single- and dual-channel VCOM amplifiers with rail-to-rail inputs and outputs. The MAX965/MAX9651 can drive up to 13mA of peak current per channel and operate
More informationPrecision Uni-/Bidirectional, Current-Sense Amplifiers
/MAX9919/MAX992 General Description The /MAX9919/MAX992 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -2V to +75V. These amplifiers are
More informationLow-Voltage, High-Accuracy, Triple/Quad Voltage μp Supervisory Circuits in SOT Package
General Description The MAX6700/MAX6710 precision triple/quad voltage microprocessor (μp) supervisory circuits monitor up to four system-supply voltages and assert a single reset if any supply voltage
More informationHigh-Speed Current Mirror and Integrated FETs for DC-DC Controller
EALUATION KIT AAILABLE DS3922 General Description The DS3922 high-speed current mirror integrates highvoltage devices necessary for monitoring the burst mode receive power signal in avalanche photodiode
More informationLoad-Dump/Reverse-Voltage Protection Circuits
General Description The MAX16128/MAX16129 load-dump/reverse-voltage protection circuits protect power supplies from damaging input-voltage conditions, including overvoltage, reversevoltage, and high-voltage
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier. Pin Configuration/Functional Diagram/Typical Application Circuit MAX2659 BIAS
19-797; Rev 4; 8/11 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier General Description The high-gain, low-noise amplifier (LNA) is designed for GPS, Galileo, and GLONASS applications. Designed in
More informationHigh IP3 Low-Noise Amplifier
EVALUATION KIT AVAILABLE General Description The low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems.
More informationReset in SOT23-3. General Description. Ordering Information. Applications. Typical Operating Circuit. Pin Configuration
General Description The MAX633/ combine a precision shunt regulator with a power-on reset function in a single SOT23-3 package. They offer a low-cost method of operating small microprocessor (µp)-based
More informationMicropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
EVALUATION KIT AVAILABLE MAX46 General Description The MAX46 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for batterypowered applications such as handsets, tablets,
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More informationLow-Power, 12-Bit, Rail to Rail Voltage-Output Serial DAC in SOT23
General Description The MAX5712 is a small footprint, low-power, 12-bit digitalto-analog converter (DAC) that operates from a single +2.7V to +5.5V supply. The MAX5712 on-chip precision output amplifier
More informationEVALUATION KIT AVAILABLE Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package MAX8902AATA+ INPUT 1.7V TO 5.5V LOGIC SUPPLY. R3 100kΩ.
19-0990; Rev 4; 4/11 EVALUATION KIT AVAILABLE Low-Noise 500mA LDO Regulators General Description The low-noise linear regulators deliver up to 500mA of output current with only 16µV RMS of output noise
More informationMAX13051 ±80V Fault-Protected Can Transceiver with Autobaud
General Description The MAX1351 ±8V fault-protected CAN transceiver with autobaud is ideal for device net and other industrial network applications where overvoltage protection is required. The MAX1351
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationHigh-Voltage, Overvoltage/ Undervoltage, Protection Switch Controller MAX6399
General Description The is a small overvoltage and undervoltage protection circuit. The device can monitor a DC-DC output voltage and quickly disconnect the power source from the DC-DC input load when
More informationnanopower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9634 General Description The MAX9634 high-side current-sense amplifier offers precision accuracy specifications of V OS less than 25μV (max) and gain error less than.5% (max).
More informationABRIDGED DATA SHEET. DeepCover Secure Authenticator with 1-Wire ECDSA and 1Kb User EEPROM. General Description
EVALUATN KIT AVAILABLE General Description DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced physical security to provide the most secure key storage possible.
More informationLow-Voltage, High-Accuracy, Quad Window Voltage Detectors in Thin QFN
19-3869; Rev 1; 1/11 Low-oltage, High-Accuracy, Quad Window General Description The are adjustable quad window voltage detectors in a small thin QFN package. These devices are designed to provide a higher
More informationTOP VIEW MAX9111 MAX9111
19-1815; Rev 1; 3/09 EVALUATION KIT AVAILABLE Low-Jitter, 10-Port LVDS Repeater General Description The low-jitter, 10-port, low-voltage differential signaling (LVDS) repeater is designed for applications
More informationMAX6126 Ultra-High-Precision, Ultra-Low-Noise, Series Voltage Reference
General Description The MAX6126 is an ultra-low-noise, high-precision, lowdropout voltage reference. This family of voltage references feature curvature-correction circuitry and high-stability, laser-trimmed,
More informationMAX38903A/MAX38903B/ MAX38903C/MAX38903D. 1A Low Noise LDO Linear Regulator in TDFN and WLP. General Description. Benefits and Features.
EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. General Description The MAX38903A/B/C/D are a low-noise linear regulators that delivers up to 1A of output current with
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers
19456; Rev ; 8/1 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers General Description The / low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim
More informationMAX985/MAX986/MAX989/ MAX990/MAX993/MAX994 Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators
General Description The MAX985/MAX986/MAX989/MAX990/MAX993/ MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range
More informationLow-Cost, Remote Temperature Switch
19-1819; Rev 3; 2/11 Low-Cost, Remote Temperature Switch General Description The is a fully integrated, remote temperature switch that uses an external P-N junction (typically a diode-connected transistor)
More informationDOCSIS 3.0 Upstream Amplifier
Click here for production status of specific part numbers. MAX3521 General Description The MAX3521 is an integrated CATV upstream amplifier IC designed to exceed the DOCSIS 3. requirements. It provides
More informationMAX8848Y/MAX8848Z High-Performance Negative Charge Pump for 7 White LEDs in 3mm x 3mm Thin QFN
EVALUATION KIT AVAILABLE MAX8848Y/MAX8848Z General Description The MAX8848Y/MAX8848Z negative charge pumps drive up to 7 white LEDs with regulated constant current for display backlight applications. By
More informationSOT23, Low-Cost, Low-Dropout, 3-Terminal Voltage References MAX6125/MAX6141/ MAX6145/MAX6150/MAX6160. Features. General Description.
General Description The /MAX6141/ low-dropout, micropower, three-terminal voltage references offer 2.5V, 4.96V, 4.5V, 5.V, and adjustable (1.23V to 12.4V) output voltages, respectively. Low, 2mV dropout
More informationDetection Circuits. General Description. Ordering Information. Typical Operating Circuit. Applications
General Description The MAX16010 MAX16014 is a family of ultra-small, lowpower, overvoltage-protection circuits for high-voltage, high-transient systems such as those found in telecom and industrial applications.
More informationFeatures. FREQUENCY 900MHz 1950MHz 2450MHz NF (db) NF (db) IIP3 (dbm) GAIN (db)
EVALUATION KIT AVAILABLE MAX// to.ghz, Low-Noise, General Description The MAX// miniature, low-cost, low-noise downconverter mixers are designed for lowvoltage operation and are ideal for use in portable
More informationCLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1
19-2575; Rev 0; 10/02 One-to-Four LVCMOS-to-LVPECL General Description The low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs.
More informationPrecision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References
19-2457; Rev 2; 11/03 Precision, Low-Power, 6-Pin SOT23 General Description The are precise, low-power analog temperature sensors combined with a precision voltage reference. They are ideal for applications
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationDOCSIS 3.0 Upstream Amplifier
General Description The MAX3519 is an integrated CATV upstream amplifier IC designed to exceed the DOCSIS 3.0 requirements. The amplifier covers a 5MHz to 85MHz input frequency range (275MHz, 3dB bandwidth),
More information