Assembly Instructions for Model: VMDD26
|
|
- Gwendoline Bridges
- 5 years ago
- Views:
Transcription
1 Assmbly Instructions for Modl: VMDD26 Thank you for choosing a Sanus Systms Vision Mount wall mount. Th VMDD26 is dsignd to mount up to 63 Flat panl tlvisions wighing up to 175 lb. to a vrtical wall. It allows you to tilt th tlvision from +5 to -15. It will also xtnd away from th wall, swivl up to ± 75, and roll ± 6. Safty Warning: If you do not undrstand ths dirctions, or hav any doubts about th safty of th installation, plas call a qualifid contractor or contact Sanus at or Our customr srvic rprsntativs can quickly assist you with installation qustions and missing or damagd parts. Rplacmnt parts for products purchasd through authorizd dalrs will b shippd dirctly to you. Chck carfully to mak sur that thr ar no missing or dfctiv parts. Nvr us dfctiv parts. Impropr installation may caus damag or srious injury. Do not us this product for any purpos that is not xplicitly spcifid by Sanus Systms. Sanus Systms can not b liabl for damag or injury causd by incorrct mounting, incorrct assmbly, or incorrct us. Plas call Sanus Systms bfor rturning products to th point of purchas. Not: Th supplid wall mounting hardwar is not for mtal stud, concrt, brick or old cindr block walls. If you ar uncrtain about th natur of your wall, consult an installation contractor. Sanus maks vry ffort to assur all ncssary tlvision mounting hardwar is inclu. If th hardwar you nd is not inclu plas consult your local hardwar stor or call Sanus Systms. Not: Wall must b capabl of supporting 5 tims th wight of th tlvision plus th wall mount! Rquird Tools: 3/16 drill bit, wrnch st, phillips scrw drivr. Supplid Parts: *Som parts not shown at sam scal (1) Wall Plat - a (1) Arm Assmbly - b (1) Prvntor - c* (2) 1 Diamtr Tub - d (2) Monitor Brackt - (4) Vis Assmbly - f * Sanus Systms 2221 Hwy 36 Wst. St. Paul, MN Customr Srvic: S complmntary Sanus products at
2 Hardwar: Hardwar shown is actual siz (7) Wir Ti Clip - g (10) Wir Ti -h * (4) Lag Bolt - i (4) Lag Bolt Washr - j (1) Alln Ky - k (4) 2 Carriag Bolt - l (4) 1/4-20 Nut - m (3) Safty Bolt - n (2) Prvntor Bolt - o Supplid Tlvision Mounting and Assmbly Hardwar: Hardwar shown is actual siz (4) M4 x 12mm Bolt - p (4) M5 x 12mm Bolt - q (4) M6 x 12mm Bolt - r (4) M8 x 16mm Bolt - s (4) M4 x 30mm Bolt - t (4) M5 x 30mm Bolt - u (4) M6 x 35mm Bolt - v (4) M8 x 40mm Bolt - w (4) M4 Lock Washr - x (4) M5 Lock Washr - y (4) M6 Lock Washr - z (4) M8 Lock Washr - aa (4) M4/M5 Spacr - bb (4) M6/M8 Spacr - cc (8) M4/M5 Washr - (4) M6/M8 Washr -
3 Stp 1: Mounting Monitor Brackts to a tlvision with a Flat Back First, dtrmin th diamtr of th Bolt (p,q,r,s) your TV rquirs by hand thrading thm into th thra insrt on th back of th TV. If you ncountr any rsistanc stop immdiatly! Onc you hav dtrmind th corrct diamtr, s th appropriat Diagram blow. You will thrad th Bolt through th appropriat Lock Washr (x,y,z,aa), a Washr (,), th Monitor Brackt (), and finally into th TV. Mak sur th Monitor Brackts ar vrtically cntrd and lvl with ach othr. Not: For TVs with a curvd back or any othr obstruction S Stp 2. Aftr complting this stp, procd to Stp 3. M4 Diamtr Bolt M6 Diamtr Bolt p r x z Diagram 1 M5 Diamtr Bolt M8 Diamtr Bolt y q aa s
4 Stp 2: Mounting th Monitor Brackts to a tlvision with a curvd back or any othr obstruction. First, dtrmin th diamtr of th Bolt (t,u,v,w) your TV rquirs by hand thrading thm into th thra insrt on th back of th TV. If you ncountr any rsistanc, stop immdiatly! Onc you hav dtrmind th corrct diamtr, s th appropriat Diagram blow. You will thrad th Bolt through th appropriat Lock Washr (x,y,z,aa), a Washr (,), th Monitor Brackt (), a spacr (bb,cc) and finally into th TV. For th M4 or M5 diamtr bolt, you will nd anothr M4/M5 Washr btwn th Monitor Brackt and th Spacr. Mak sur th Monitor Brackts ar vrtically cntrd on th TV and lvl with ach othr. M4 Diamtr Bolt M6 Diamtr Bolt x t z v bb cc Diagram 2 M5 Diamtr Bolt M8 Diamtr Bolt y u aa w bb cc
5 Stp 3: A th Vis Assmblis to th Monitor Brackts: Not: Do not ovrtightn th 1/4-20 Nut. Th Vis Assmbly should b abl to rotat frly around th Carriag Bolt. Plac th Vis Assmbly (f) btwn th two sids of th Monitor Brackt () so that th two jaws point toward th st of 1 diamtr hols and th alln bolt is facing away from th tlvision as shown in th Dtaild Viw of Diagram 3. Plac a 2 Carriag Bolt (l) through th squar hol in th sid of th Monitor Brackt, through th hol in th Vis Assmbly, and thn through th squar hol in th othr sid of th Monitor Brackt also shown in th Dtaild Viw of Diagram 3. Nxt, tightn a 1/4-20 Nut (m) onto th nd of th 2 Carriag bolt. Rpat this stp for th bottom of th Monitor Brackt. Finally, rpat ths two stps for th scond Monitor Brackt. Diagram 3 Dtaild Viw m f l Stp 4: Attach th Arm Assmbly to th Tlvision (Part I) First, orint ach Vis Assmbly (f) so that a 1 Diamtr Tub (d) will pass through th 1 round hol in th Monitor Brackt () and thn btwn th jaws of th Vis Assmbly as shown in Diagram 4. Insrt a 1 Diamtr Tub through th top hol in th first Monitor Brackt also shown in Diagram 4. Rpat this stp for th Bottom hol in th sam Monitor Brackt. S Stp 5 to finish attaching th arm Assmbly. Diagram 4 d f
6 Stp 5: Attach th Arm Assmbly to th Tlvision (Part II) Warning: Th 1 Diamtr Tubs must xtnd byond th outsid dgs of both Monitor Brackts and th Alln Bolts in all 4 Vis Assmblis in th Monitor Brackts and th 4 Vis Assmblis in th Arm Assmbly must b tightnd for th installation to b saf! Position th Arm Assmbly (b) so that th hook shapd tab shown in th Dtaild Viw of Diagram 5 is on th top. Lin up th two 1 diamtr hols in th Monitor Brackt () at th othr nd of th Arm Assmbly with th with th 1 Diamtr Tubs (d). Continu to push th 1 Diamtr Tubs through both th vis assmblis on th Arm Assmbly and thn through th othr Monitor Brackt. Again, mak sur th Vis Assmblis (f) on both th Arm Assmbly and th scond Monitor Brackt ar orintd so that th 1 Diamtr Tubs will pass btwn th jaws. Onc th 1 Diamtr Tubs ar in plac, tightn th alln bolts on th four Vis Assmblis in th two Monitor Brackts with th Alln Ky (l) to lock th tlvision to th mount. Nxt, slid th Arm Assmbly into th dsird position btwn th two Monitor Brackts and tightn th four rmaining Alln Bolts in th Vis Assmblis insid th Arm Assmbly. S Diagram 5 blow. Diagram 5 Dtaild Viw tab Not: Sanus rcommnds Arm Assmbly to b cntrd btwn Monitor Brackts Stp 6: Attach th Wall Plat: Wood Stud installations only. Warning: DO NOT OVERTIGHTEN THE LAG BOLTS! Tightn Lag Bolts (i) only until th Lag Bolt Washr (j) is pulld firmly against th Wall Plat (a). Th Wall Plat (a) must b mountd to two wood studs at last 12 apart. Us a high quality stud snsor to locat two adjacnt studs. It is a good ida to vrify whr th studs ar locatd with an awl or thin nail. Pr-drill a 2.5 dp hol in ach stud at th dsird hight using a 3/16 drill bit. Mak sur ths hols ar in th cntr ara of th studs and lvl with ach othr. Us th Wall Plat as a tmplat to mark th location of th scond hol in ach stud. Drill 2.5 dp hols using th 3/16 drill bit in th markd locations. Attach th Wall Plat to th wall using four Lag Bolts (i) and four Lag Bolt Washrs (j). Mak sur th Wall Plat is orintd so th flat surfac in th cntr of th plat is against th wall. S Diagram 6 blow. Diagram 6 i wall stud a j drywall cutaway to show studs
7 Stp 6: Hang th assmbly onto th Wall Plat Warning: This stp may rquir 2 popl to lift th assmbly onto th Wall Plat! Sanus is not rsponsibl for injury or damag. Orint th Arm Assmbly (b) so that th arm xtnds dirctly away from th tlvision and th transfr plat is paralll with th tlvision. Som tlvisions may rquir 2 popl to lift! Lift up th assmbly and hook th transfr plat onto th tab on th top of th Wall Plat (a) as shown in Diagram 6a. Horizontally adjust th transfr plat sid to sid on th Wall Plat until it is in th dsird location. Thrad ach Safty Bolt (n) into on of th thr hols in th bottom of th transfr plat and tightn thm so that thy ar bhind th tab on th bottom of th Wall plat as shown in Diagram 6b. Diagram 6a Diagram 6b b wall tab transfr plat a n Stp 7: Lvling th Monitor and Adjusting th Tnsion WARNING: Do NOT REMOVE th tnsion nuts in Diagram 7! Onc th tlvision is mountd onto th Wall Plat (a), and th Safty Bolts (n) ar tight, it can b adjustd to lvl. Slightly loosn th two alln bolts on th back of th Arm Assmbly (b). Onc thos two bolts ar loosnd, th tlvision can b adjustd ±6º until lvl. Whn th tlvision is lvl rtightn th two alln bolts. Th tilt can b adjustd by simply tilting th TV. To adjust th tnsion of tilt, us th tnsion knobs. Th tnsion nuts labld in Diagram 7 can b slightly loosnd or tightnd to adjust th tnsion of th Arm Assmbly. If you nd to adjust th tnsion nut closst to th TV, you must rmov th safty brackt, adjust th tnsion and r-install th safty brackt as shown in th safty brackt installation viw of Diagram 7. Safty Brackt Installation Diagram 7 tnsion nut tnsion knobs alln bolts tnsion nut safty brackt
8 Stp 8: A Prvntor Warning: Watch for Pinch Points. Do not put your hands or fingrs btwn movabl parts! Position th Prvntor so th flat sid is facing th idlr as shown in th Dtaild Viw of Diagram 8. To attach th Prvntor, plac a Prvntor Bolt (o) through th Prvntor and into th hols in th idlr. Procd to tightn th Prvntor Bolts with an Alln Ky (k) until tight. Dtaild Viw Diagram 8 b c idlr o Stp 9: Wir Managmnt Warning: Do not run Cabls through a pinch point! Bfor bginning cabl managmnt pull th tlvision into th position as far from th wall as possibl. Lav som slack in th cabls so that during motion so thr is no ad tnsion on th connctors. Thr ar svral placs to attach Wir managmnt tis to kp cabls out of th way. Wir Ti Clips (g) can b attachd to th hols in th top and th bottom of th Arm Assmbly (b), sids of th Prvntor (c) and th top and bottom of th pillow block by simply prssing thm into plac as shown in th Dtaild Viw of Diagram 9. Wir Tis (h) can thn b ad to both th Wir Ti Clips, or th hols in th sids of ithr of th Monitor Brackts (). Dtaild Viw Diagram 9 g b Sanus Systms 2221 Hwy 36 Wst. St. Paul, MN Customr Srvic: S complmntary Sanus products at
Assembly Instructions for Model: VMAA18
Assmbly Instructions for Modl: VMAA18 Thank you for choosing a Sanus Systms VisionMount wall mount. This modl will hold 30-50 inch Plasma and LCD TVs wighing up to 130 lbs to a vrtical wall. It is a full
More informationAssembly Instructions for Model: VMDD26
Assembly Instructions for Model: VM26 Thank you for choosing a Sanus Systems Vision Mount wall mount. The VM26 is designed to mount up to 63 lat panel televisions weighing up to 175 lb. to a vertical wall.
More informationCAUTION: Do not install damaged parts!!!
Your satisfaction is important to us, plas lt us hlp! If you hav any qustions or concrns during th installation, our support rprsntativs ar availabl to assist you. Plas call: 1-877-769-3765 or Liv Chat
More informationAssembly Instructions for Model: VMPL3
Assembly Instructions for Model: VMPL3 Thank you for choosing a Sanus Systems VisionMount Wall Mount. The VMPL3 is designed to hold 27-84 Flat Panel LCD or Plasma Displays weighing up to 280 lbs. It will
More informationAssembly Instructions for Model: MF110
Assembly Instructions for Model: MF110 Thank you for choosing a Sanus Systems VisionMount wall mount. The MF110 is designed to mount LCD flat panels with VESA (Video Electronics Standards Association)
More informationAssembly Instructions for Model: VMCM1
Assembly Instructions or Model: VMCM1 Thank you or choosing a Sanus Systems Vision Mount ceiling mount. The VMCM1 is designed to mount up to 50 inch lat panel televisions weighing up to 130 lb. to an existing
More informationGV60 VALORSTAT PLUS OPERATING INSTRUCTIONS. VALORSTAT PLUS GV60 Electronic Ignition Remote Control
GV60 VALORSTAT PLUS OPERATING INSTRUCTIONS VALORSTAT PLUS GV60 Elctronic Ignition Rmot Control Valor modls using th ValorStat PLUS Rmot Control Portrait 530I Vogu 1300 Horizon 534I Linar L1 1500 Horizon
More information3-in-1 TM TV Console Model # XL-25E U.S. Patent 8,622,005
LOT NUMBR: DAT PURCHASD: / / 3-in-1 TM TV Console Model # XL-2 U.S. Patent 8,22,00 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard
More informationPLA50B Instruction Manual
PLA50B Instruction Manual We are here to help! Please contact Customer Service with any questions. Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East, and Africa: +
More informationMonoprice Adjustable Tilt/Swivel Flat Panel Wall Mount Model MLB-109B/RLB-102B (PID# 4926)
Monoprice Adjustable Tilt/Swivel Flat Panel Wall Mount Model MLB-109B/RLB-102B (PID# 4926) VESA Compliant up to 770x480 Max Weight: 125lbs UNPACKING INSTRUCTIONS Carefully open the carton, remove the contents
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationONEWAY. Owner s Manual. Manufacturers Limited Warranty Lathe POWER AND PRECISION FOR TODAY S WOODTURNER
Manufacturrs Limitd Warranty 32 Dat Purchasd: This Onway product is backd by a warranty priod of 5 yars from th dat of purchas. Non-manufacturd parts (i.. Driv, Motor, Barings tc) ar not covrd undr this
More informationAssembly Instructions for Model: VMPR1
Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP
More informationLab 12. Speed Control of a D.C. motor. Controller Design
Lab. Spd Control of a D.C. motor Controllr Dsign Motor Spd Control Projct. Gnrat PWM wavform. Amplify th wavform to driv th motor 3. Masur motor spd 4. Masur motor paramtrs 5. Control spd with a PD controllr
More informationSAN12 ( <00>)
SAN12 (6904-002020 ) Wood 13mm (1/2 in.) 3mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East,
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationDTA123E series V CC I C(MAX.) R 1 R 2. 50V 100mA 2.2k 2.2k. Datasheet. PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors)
DT123 sris PNP -100m -50V Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Paramtr V CC I C(MX.) R 1 R 2 Valu 50V 100m 2.2k 2.2k Faturs 1) Built-In Biasing Rsistors, R 1 = R 2 = 2.2k. Outlin
More informationSAN25BB. Wood. Concrete ( <00>) Sanus Systems 2221 Hwy 36 West Saint Paul, MN USA
SAN25BB (6904-002013 ) Wood Concrete Block or Solid 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 888-333-9952 952-277-3958
More informationEMA5 / UMA5N / FMA5A. V CC -50V -100mA 2.2kW 47kW I C(MAX.) R 1 R 2. Datasheet
M5 / UM5N / FM5 PNP -100m -50V Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Faturs Paramtr V CC -50V -100m 2.2kW 47kW I C(MX.) R 1 R 2 1) Built-In Biasing Rsistors. 2) Two DT123J
More informationThe Trouton Rankine Experiment and the End of the FitzGerald Contraction
Th Trouton Rankin Exprimnt and th End of th FitzGrald Contraction Dr. Adrian Sfarti 1. Abstract Assuming that FitzGrald was right in his contraction hypothsis, Trouton sought for mor positiv vidnc of its
More informationNewHeights Series 4 Bonita ET 3-Leg Workstation Warranty: raproducts.com/warranty
NewHeights Series 4 Bonita T 3-Leg Workstation Warranty: raproducts.com/warranty Instruction #54022 Dated: 02/21/2019 1 of 12 RAD ALL INSTRUCTIONS BFOR USING THIS PRODUCT. WARNING US THIS PRODUCT ONLY
More informationMigration ATV11 - ATV12
Th ATV12 is compatibl with th ATV11 (latst vrsion), nvrthlss som diffrncs can xist btwn both drivs. Both modls (ATV11 and ATV12) ar availabl in hatsink or bas plat vrsions. Attntion: ATV11 "E" Dimnsions
More informationALF109 Instruction Manual
ALF109 Instruction Manual Scan here to view product demo and install videos or visit san.us/101 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationMM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationAssembly Instructions for Model: SD115
Assembly Instructions for Model: SD115 Thank you for choosing a Sanus Systems desk mount. The SD115 is designed to mount LCD flat panels with a VESA (Video Electronics Standards Association) hole pattern
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More information1/24/2017. Electrical resistance
1/24/2017 Photocopirs and th National Grid Photoconductors so far.. On xampl of a smiconducting matrial Elctrical insulator in th dark, conductor in th light mportant componnt in a photocopir butt Slctiv
More informationModel MSPPWRTW Large Flat Panel Single Arm Wall Mount
INSTALLATION INSTRUCTIONS Model Large Flat Panel Single Arm Wall Mount The is wall-mounted, rugged, versatile, and installer-friendly. The mount is compatible with the standard (14 x 14 ) PSB interface
More informationINSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT
INSTALLATION GUIDE Model:B60 RECESSED IN WALL MOUNT Features: Installs between 16 (406mm) wood stud centers Mounting Pattern Compliance: VESA 100*100mm up to 600 x 400mm Level 5 degree horizontal adjustment
More information19 to 39 TV WALL MOUNT - FULL MOTION
19 to 39 TV WALL MOUNT - FULL MOTION RF-HTVMMAB For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...5
More informationQLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationSAN213 Instruction Manual
SAN213 Instruction Manual Scan here to view product demo and install videos or visit san.us/105 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 We re ready to help! Scan for easy install video san.us/1145 CAUTION: IMPORTANT
More informationEngagement Schedule. Schedule M-3 Tutorial. December 07 United States
Engagmnt Schdul M-3 Tutorial Schdul M-3 Tutorial Dcmbr 07 Unitd Stats Schdul M-3 Schdul M-3 applis to: C and S Corporations whr Total Assts ar qual or gratr than $10 million OR consolidatd d ntity Partnrships
More informationPrecast Products Manual
Prcast Products Manual RPI-LOK onnction Plat Systm* Th Madow urk onnction Plat Systm liminats many fild wlding oprations with its uniqu and thoughtful dsign. ach Systm connction has thr basic parts: an
More informationSAN25BB Instruction Manual
SAN25BB Instruction Manual Scan here to view product demo and install videos or visit san.us/109 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationAssembly Instructions FML64PL
Assembly Instructions FML64PL Please read these instructions carefully before before using. using. This This model will hold most 32-65 Flat Flat Panel Panel TVs. TVs. Load capacity: 34kg (75Lbs). lbs).
More informationA701 ( <00>) 12 mm (7/16 in.)
A701 (6904-002018 ) Wood Stud 12 mm (7/16 in.) 2.4 mm (3/32 in.) 6 mm (15/64 in.) 3 mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988
More informationMantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
More information4-H Action Exhibits. All participants take an equal role in planning and doing the Action Exhibit.
4-H Action Exhibits by Laurn Brsstt, Dbbi Chvr, Lisa Townson, Pnny Turnr An Action Exhibit faturs on to thr 4-H rs showing a procss; making or doing somthing whil xplaining it to th audinc and answring
More information/A INSTALLATION MANUAL
02-001118/A INSTALLATION MANUAL LEVITATION TV MOUNT UNIVERSAL TV MOUNT FOR 55"-85" PANEL TV'S 125 POUND MAXIMUM WEIGHT IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL
More informationQLT25 INSTRUCTION MANUAL
QLT25 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. (UK: 0800 056 2853) We re ready to help! CAUTION: IMPORTANT SAFETY INSTRUCTIONS
More informationSAN22BB ( <00>)
SAN22BB (6904-002016 ) Wood Concrete Block or Solid 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988
More informationInstallation and Assembly: Universal Projector Wall Arm
Installation and ssembly: Universal Projector Wall rm Models: PST-2955, PST-2955-W, PST-2955, PST-2955-W Max UL Load Capacity: 35 lb (5.8 kg) 2300 White Oak Circle urora, Il 60502 (800) 865-22 Fax: (800)
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens Model# IM760P, IM760P-S IM760PU, IM760PU-S Screen size range 32" to 71" (81 to 180 cm) 32" to 60" (81 to 152 cm) IM760P IM760P-S
More informationINSTRUCTIONS for STAKE POCKET RACK WARNING: Do NOT attempt to install or use this rack without following all instructions.
28SP11 U.S. Rack Inc. 2850 Falcon Drive, Madera, CA 93637 1 888 877 2257 INSTRUCTINS for STAK PCKT RACK WARNING: Do NT attempt to install or use this rack without following all instructions. SPCIFICATINS
More informationSM-RAZOR-ART2-L / SM-RAZOR-ART2-XL
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done
More information/B INSTALLATION MANUAL
02-001127/B INSTALLATION MANUAL LEVITATION TV MOUNT UNIVERSAL TV MOUNT FOR 55"-75" PANEL TV'S 100 POUND MAXIMUM WEIGHT IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL
More informationIn this project you ll learn how to create a game in which you have to save the Earth from space monsters.
Clon Wars Introduction In this projct you ll larn how to crat a gam in which you hav to sav th Earth from spac monstrs. Stp 1: Making a Spacship Lt s mak a spacship that will dfnd th Earth! Activity Chcklist
More informationINSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
More informationInductive proximity sensors
Is (V) Is (V) Is (V) Functions, principl, curvs, schms Inductiv proximity snsors OsiSns XS Application Snsors with analogu output signal... V () or ma For position, displacmnt and dformation control/monitoring
More information5PC Motion Cushioned Seating Set (Stationary Rocker) # BCF00822J01 UPC #
5PC Motion Cushioned Seating Set (Stationary Rocker) # BCF008J0 UPC # 0-50874-5638-0 If parts are missing or you need assistance, please contact our Customer Service Center, Monday through Friday 9am -
More informationINSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING
PLASMA TV WALL MOUNT TILT Universal (RGTU-210) S CAUTION CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION alerts you to the possibility
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. (UK: 0800 056 2853) We re ready to help! CAUTION: IMPORTANT SAFETY INSTRUCTIONS
More informationInstallation and Assembly - Articulating Swivel Double-Arm for 42" - 71" Plasma Screens
Installation and ssembly - rticulating Swivel Double-rm for 42" - 71" Plasma Screens Models: PLV 70, PLV 70-S R This product is UL Listed. It must be installed by a qualified professional installer. Maximum
More informationSM-RAZOR-F-M/L/XL. Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL
SM-RAZOR-F-M/L/XL Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationEMD3 / UMD3N / IMD3A V CC I C(MAX.) R 1 R 2. 50V 100mA. 10k. 10k. 50V 100mA. 10k. 10k. Datasheet
NPN + PNP Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu MT6 UMT6 V CC I C(MX.) Paramtr V CC I C(MX.) 50V 100m 10k 10k Valu 50V
More informationMONOPRICE. Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features. User's Manual P/N 16102
MONOPRICE Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features P/N 16102 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 5 CUSTOMER SERVICE...
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationEDGE2 DUAL MONITOR ARM
EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationDTD114GK V CEO I C R. 50V 500mA 10kW. Datasheet. NPN 500mA 50V Digital Transistors (Bias Resistor Built-in Transistors) Outline Parameter Value SMT3
NPN 500mA 50V Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu SMT3 V CEO I C R 50V 500mA 10kW Bas Emittr Collctor DTD114GK SOT-346 (SC-59) Faturs 1) Built-In Biasing
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays Model# Display size range IM760P, IM760P-S 32" to 71" (81 to 180 cm) IM760PU, IM760PU-S 32" to 65" (81 to 165 cm) This product
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationMedium Flat Panel Dual Swing Arm Wall Mount JWD-V
INSTALLATION Medium Flat Panel Dual Swing Arm Wall Mount The single swing arm wall mount is designed for mounting a medium sized flat panel display. The can swing out from, or fold against, the wall depending
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationMSP-DCCPGTU Large Screen Tilt Display Mount
INSTALLATION INSTRUCTIONS Large Screen Tilt Display Mount The Large Screen Tilt Display Mount is a quick disconnect mounting solution for large flat panel displays. The mount features infinite adjust ability
More informationINSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series
INSTALLATION INSTRUCTIONS Large Flat Panel Wall Mount Model: PRO-2000 Series PRO-2000 Series Wall Mount Features: Accommodates large flat screens weighing up to 200 lbs (90.7 kg). Mounting brackets adapt
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationDefeating a Scarcity Mindset
Dfating a Scarcity Mindst From an arly ag, you ar bombardd with mssags concrning what to think about mony. Many of thm ar wrong. For instanc, w r taught that to b rich, you hav to mak a lot of mony. But,
More informationMM750 Installation Instructions
MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on
More informationSafety Technique. Multi-Function Safety System SAFEMASTER M Output Module With Output Contacts BG 5912
Safty Tchniqu Multi-Function Safty Systm SAFEMASTER M Output Modul With Output Contacts BG 5912 0247388 According to - Prformanc Lvl (PL) and catgory 4 to EN ISO 13849-1: 2008 - SIL Claimd Lvl (SIL CL)
More informationEMD4 / UMD4N V CC I C(MAX.) R 1 R 2. 50V 100mA. 47kW. V CC -50V -100mA 10kW. Datasheet
NPN + PNP Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu EMT6 UMT6 V CC I C(MAX.) R 1 R 2 50V 100mA 47kW 47kW (1) (2) (3) (6) (5) (4) EMD4 (SC-107C)
More informationLARGE FLAT PANEL DISPLAY STATIC MOUNT PST 2000 Series
INSTALLATION INSTRUCTIONS LARGE FLAT PANEL DISPLAY STATIC MOUNT The PST static wall mount accommodates large flat screens weighing up to 200 lbs (90.72kg). The teardrop holes in the mount allow for quick
More informationUS6H23 / IMH23 V CEO 20V V EBO 12V. 600mA R k. Datasheet. Outline Parameter Tr1 and Tr2 TUMT6 SMT6
NPN 600m 20V Digital Transistors (Bias Rsistor Built-in Transistors) For Muting. Datasht Outlin Paramtr Tr1 and Tr2 TUMT6 SMT6 V CO 20V V BO 12V I C 600m R US6H23 1 4.7k IMH23 SOT-457 (SC-74) Faturs 1)
More informationINSTALLATION GUIDE. Flat Panel Arm Mount BTAR2/37. VESA 200x200 compatible. Support 24" to 37" Screens Max Load Capacity: 80 lbs (36 kg)
INSTALLATION GUIDE Flat Panel Arm Mount BTAR2/37 Support 2" to 37" Screens Max Load Capacity: 80 lbs (36 kg) VESA 200x200 compatible Note: Read entire instruction sheet before you start installation and
More informationMONOPRICE. Above Fireplace Pull-Down Full-Motion TV Wall Mount. User's Manual P/N 27773
MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationModels: PLAV70-UNL, PLAV70-UNLP. Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 95" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 95" Plasma Screens Models: PLAV70-UNL, PLAV70-UNLP Max UL Load Capacity: 200 lb (91 kg) 2300 White Oak Circle Aurora, Il 60502
More informationA401 Instruction Manual
A401 Instruction Manual Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520 952-225-6013 info@sanus.com Europe, Middle East, and Africa:
More informationFlat Panel Dual Swing Arm Wall Mount (FWD-110) MSP-SA
INSTALLATION INSTRUCTIONS Flat Panel Dual Swing Arm Wall Mount (FWD-110) The dual arm wall mount was designed to support flat panel displays with 10 to 30 diagonal screens and weighing a maximum of 40
More informationSM-RAZOR-T-M/L/XL. Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL
SM-RAZOR-T-M/L/XL Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationSmall Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationN-Channel Depletion-Mode Vertical DMOS FET in Single and Dual Options. 14-Lead QFN* 5.00x5.00mm body 1.00mm height (max) 1.
Suprtx inc. Faturs Vry low gat thrshold voltag Dsignd to b sourc-drivn Low switching losss Low ffctiv output capacitanc Dsignd for inductiv loads Wll matchd for low scond harmonic whn drivn by Suprtx M30
More informationController for Electro-Pneumatic Regulator
Controllr for Elctro-Pnumatic Rgulator Analog output - ma - VDC Digital input data Digital signal Analog signal PLC Controllr bit bit. bit point prssur sitch function Sitch output is nabld by stting th
More informationTP4463. ASSeMBly INSTruCTIONS FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3
TP63 FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3 Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount ASSeMBly INSTruCTIONS for your safety, please follow these precautions:!
More informationPLEATED SHADE ARCH INSIDE MOUNT GETTING STARTED. A few simple tools are required: STANDARD HARDWARE
HONEYCOMB AND PLEATED SHADE ARCH GETTING STARTED INSIDE MOUNT A few simple tools are required: HALF ARCH INSTALLATION Your half arch has been shipped in the closed osition. When fanned, the rails will
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationFull Motion LED, LCD TV Wall Mount
8. Adjustment INSTALLATION MANUAL Full Motion LED, LCD Wall Mount 120 +15-15 +5-5 CAUTION: DO NOT ECEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! Adjust to the desired location
More informationUMH8N / IMH8A V CEO I C R 1. 50V 100mA 10k. Datasheet. Outline. Inner circuit
NPN 100m 50V Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr V CO I C Tr1 and Tr2 50V 100m 10k UMT6 UMH8N SOT-363 (SC-88) SMT6 IMH8 SOT-457 (SC-74) Faturs 1) Built-In
More informationMSP-DCCPGSU Large Screen Static Display Mount
INSTALLATION INSTRUCTIONS Large Screen Static Display Mount The Large Screen Static Display Mount () is a quick disconnect mounting solution for large flat panel displays. The mount self-adjusts for the
More informationModular Video Wall System with Push-to-Pop-out and Anti-Theft Features VW401P. User s Manual
Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features Contents Weight Limit.... 2 Warning Statements.... 2 Installation Tools.... 3 Parts List... 4 Features.... 5 Installing the Mount....
More informationInstallation and Assembly: Full Service Video Wall Mount
Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet
More informationTV WALL MOUNT ASSEMBLY GUIDE RF-TVMLPT01V2
TV WALL MOUNT RF-TVMLPT01V2 For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...4 ASSEMBLY GUIDE Before
More informationAssembly InstructIons
tp50 FLAT PANEL TV MOUNTING SYSTEM OPTION OPTION 2 OPTION 3 Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount Assembly InstructIons for your safety, please follow these precautions:!
More informationSB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
More informationFull-motion Wall Mount
Full-motion Wall Mount MD120409-01 AWM1521- AU Safety Instruction Component Checklist WARNING IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing.
More informationJanome DC3050 Instruction Manual Model DC 3050
Janom Sing Machin Janom DC3050 Instruction Manual Modl DC 3050 DC3050 Onrs Manual/ Usr Guid Janom Sing Machin IMPORTANT SAFETY INSTRUCTIONS Whn using an lctrical applianc, basic safty prcautions should
More information