PSR05 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS IEC COMPATIBILITY (EN ) FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION SOT-143
|
|
- Samuel McCarthy
- 5 years ago
- Views:
Transcription
1 56 PSR5 STEERIN IOE/TVS ARRA COMBO APPLICATIONS Ethernet - / Base T irewire Wireless Communications USB Interface IEC COMPATIBILIT (EN6-) 6--2 (ES): Air - 5kV, Contact - 8kV 6-- (ET): A - 5/5ns 6--5 (Surge): 2A, 8/2µs - Level 2(Line-nd) & Level 3(Line-Line) SOT-3 EATURES 5 Watts Peak Power per Line (tp = 8/2µs) ES Protection > 25 kilovolts Low Clamping Voltage Unidirectional Configuration Protects 2 Ports & Power Supply Low Capacitance: p RoHS Compliant in Lead-ree Versions MECHANICAL CHARACTERISTICS Molded JEEC SOT-3 Weight 9 milligrams (Approximate) Available in Lead-ree Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, : C Consult actory for Leaded evice Availability lammability Rating UL 9V- 8mm Tape and Reel Per EIA Standard 8 Marking: Marking Code PIN CONIURATION N RE R7 3/8
2 PSR5 EVICE CHARACTERISTICS 25 C Unless Otherwise Specified PARAMETER SMBOL VALUE UNITS Peak Pulse Power (tp = 8/2µs) - See igure P PP 5 Watts Operating Temperature Storage Temperature -55 to 5 C -55 to 5 C Peak orward Voltage - I = A, 8/2µs V.5 Volts T L T ST ELECTRICAL CHARACTERISTICS PER 25 C Unless Otherwise Specified PART NUMBER EVICE MARKIN RATE STAN-O V WM MINIMUM ma V (BR) CLAMPIN (See ig. I P = A V C CLAMPIN (See ig. 2) 8/2µs V I PP LEAKAE V WM I µa CAPACITANCE (See Note ) (See ig. 5) (Per ata MHz C J(S) p PSR5 5A A 5. Note : As shown in igure 5, RE is connected to ground, RE 2 is connected to +V CC and input applies to V CC = 5V, V sign = 3mV, = MHz. P PP - Peak Pulse Current - Watts,, IURE PEAK PULSE POWER VS PULSE TIME 5W, 8/2µs Waveform I PP - Peak Pulse Current - % of I PP t f IURE 2 PULSE WAVE ORM Peak Value I PP e -t = t IPP /2 TEST WAVEORM PARAMETERS t f = 8µs = 2µs.,, - Pulse uration - µs t - Time - µs 56.R7 3/8 2
3 PSR5 RAPHS % Of Rated Power IURE 3 POWER ERATIN CURVE Peak Pulse Power 8/2µs Average Power T L - Lead Temperature - C 5 Volts per ivision IURE OVERSHOOT & CLAMPIN ES Test Pulse: 5 kilovolt, /3ns (waveform) IURE 5 INPUT CAPACITANCE CIRCUIT RE2 +V CC V SIN RE 6 IURE 6 TPICAL REVERSE VS CAPACITANCE 2 C - Capacitance - p V R - Reverse Voltage - Volts 56.R7 3/8 3
4 PSR5 APPLICATION NOTE The PSR5 is a low capacitance, bidirectional TVS array that is designed to protect or high speed data lines from the damaging effects of ES or ET. This product series has a surge capability of 5 Watts P PP per line for an 8/2µs waveform and offers ES protection > 25kV. COMMON-MOE CONIURATION (igure ) Ideal for use in USB applications, two PSR5 devices provides up to two(2) lines of protection(per device) in a common-mode configuration as depicted in igure. Circuit connectivity is as follows: Pins 2 and 3 are connected to the datalines. Pin is connected to ground. Pin is connected to the databus. igure. Typical Common-Mode USB Protection CIRCUIT BOAR LAOUT RECOMMENATIONS Circuit board layout is critical for Electromagnetic Compatibility (EMC) protection. The following guidelines are recommended: 2 3 The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. + - USB PORT The path length between the TVS device and the protected line should be minimized. All conductive loops including power and ground loops should be minimized. The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. USB CONTROLLER + - USB PORT round planes should be used whenever possible. or multilayer PCBs, use ground vias R7 3/8
5 PSR5 SOT-3 PACKAE OUTLINE & IMENSIONS PACKAE OUTLINE SOT-3 A L B S J PACKAE IMENSIONS MILLIMETERS INCHES IM MIN MAX MIN MAX H R L C MOUNTIN PA K A B C H J K L L R S NOTES X x3 m n TPICAL IM Millimeters.2 x.9.85 x Inches.7 x x X m n. imensioning and tolerances per ANSI.5M, Controlling imension: Inches 3. imensions are exclusive of mold flash and metal burrs. TAPE & REEL ORERIN NOMENCLATURE. Surface mount product is taped and reeled in accordance with EIA Suffix-T7 = 7 Inch Reel - 3, pieces per 8mm tape, i.e., PSR5-T7. 3. Suffix-T3 = 3 Inch Reel -, pieces per 8mm tape, i.e., PSR5-T3.. Suffix - L = Lead-ree, Pure-Tin Plating, i.e., PSR5-L-T7. Tape & Reel Specifications (imensions in millimeters) Outline & imensions: Rev 3-3/8, 6 Reel ia. Tape Width A B K E W P P2 P tmax 78mm (7 ) 8mm 3. ±. 2.7 ±..35 ±..5 ±..75 ±. 3.5 ±.5 8. ±.3. ±. 2. ±.5. ±..25 t P P2 Pitches Cumulative Tolerance on Tape. ±.2 E Top cover tape K A B W P User irection of eed COPRIHT ProTek evices 27 SPECIICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEEC). ESIN CHANES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek evices 2929 South air Lane, Tempe, AZ Tel: ax: sales@protekdevices.com Web Site: 56.R7 3/8 5
PSR05 STEERING DIODE / TVS ARRAY COMBO APPLICATIONS. Ethernet - 10/100 Base T FireWire Wireless Communications USB Interface
56 Only One Name Means ProTek Tion PSR5 STEERIN DIODE / TVS ARRAY COMBO APPLICATIONS Ethernet - / Base T FireWire Wireless Communications USB Interface IEC COMPATIBILITY (EN6-) 6-- (ESD): Air - 5kV, Contact
More informationSLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSLVU WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
600 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY PIN CONFIGURATIONS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationSR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
More informationDSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationGBLC03 - GBLC24C. This datasheet has been downloaded from at this page
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationSMDB712C BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION The offers four individual asymmetrical devices in a SO-8 package. The device can be configured for 2 or 4 datalines depending on power level requirements.
More informationWE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
More informationPSRDAxx-4A Series 500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The are low capacitance multi-line steering diode/transient voltage suppressor arrays that provides board level protection for standard TTL
More informationPAM08SD23xx/C Series HIGH POWERED TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED TVS ARRAYS DESCRIPTION The are transient voltage suppressor arrays designed for ESD protection of automotive applications. These silicon based diodes offer superior clamping voltage and performance
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationPSMDA05C-4 - PSMDA24C-4
500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The PSMDAxxC-4 Series are monolithic transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against
More informationistributed by: www.jameco.com 8834242 The content and copyrights of the attached material are the property of its owner. 58 STNR PITN TVS RRY PPITIONS aptop omputers ellular Phones igital ameras Personal
More informationGBLC05CDN - GBLC24CDN
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxxCDN Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationGBLC03 - GBLC24C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationPAM02SD23xx/C Series ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION The are ultra low capacitance transient voltage suppressor arrays, designed to protect automotive applications. These devices are available in either a unidirectional
More informationUSB USB50824C 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB508xx and USB508xxC Series are multi-line ultra low capacitance transient voltage suppressor arrays that provide board level protection
More informationPSD0561 HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION DFN-2 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION The is a transient voltage suppressor array, designed to protect sensitive electronics from damage or latchup due to EOS, lightning, CDE and ESD. This
More informationSMP6LLCxx-2P Series RTCA DO-160G COMPLIANT PRODUCT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-16 PACKAGE APPLICATIONS FEATURES
MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationSM10KWxxA/CA Series RTCA DO-160G COMPLIANT PRODUCT 60 KILOWATT TVS COMPONENTS DESCRIPTION DFN-2-KW PACKAGE FEATURES APPLICATIONS
60 KILOWATT TVS COMPONENTS DESCRIPTION The are high-powered surface mount transient voltage suppression components designed to protect equipment and systems from the damaging effects of high voltage spikes.
More informationPAM37SDxxAL/CAL Series RTCA DO-160G COMPLIANT PRODUCT
400 WATT TVS COMPONENT DESCRIPTION The is a transient voltage suppressor array, designed to protect applications such as consumer electronic products, automotive, telecommunications, aerospace and intelligent
More information30KPA Series RTCA DO-160G COMPLIANT PRODUCT. 30kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
30kW POWER TVS COMPONENT DESCRIPTION The, are discrete 30,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage
More informationSRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART phones,
More information1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More information5KP5.0A - 5KP440A. 5kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAMS
5kW POWER TVS COMPONENT DESCRIPTION The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationUMD03B through UMD36B
PRODUCT DESCRIPTION The UMDXXB series are Bi-directional Transient Voltage Suppressor Arrays that designed to protect components which are connected to data and transmission lines against electrostatic
More informationDigital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems PARAMETER SYMBOL VALUE UNITS
HIGH POWER TVS ARRAY APPLICATIONS Digital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems SURFACE MOUNT FEATURES Junction Passivation Optimized Design Passivated
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series
Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata
More informationSR2.8 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationUESD6V8S2B. Dual Line ESD Protection Diode Array UESD6V8S2B SOT523. General Description. M: Monthly Code UESD6V8S2B SOT523
General Description UESD6V8S2B Dual Line ESD Protection Diode Array UESD6V8S2B SOT523 The UESD6V8S2B of TVS diode array is designed to protect sensitive electronics from damage or latch-up due to ESD.
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationWS2.8LVU. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT23-3L (Top View) Document: W , Rev: C
Document: W33, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/μs) One device protects one unidirectional line Two devices protect two high-speed data line pairs Low capacitance
More informationSRDA3.3-6 and SRDA05-6 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series
Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationPESDAWC236T5VU Low Capacitance TVS Array
Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series
Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationUESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN66-6L UESD64B SC89-5/SOT553/SOT665 General Description The
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More informationRailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description 查询 TG 供应商 RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationRClamp0544M RailClamp ESD Protection for HDMI Interfaces PRELIMINARY Features
- RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationPESDLC23T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is a TVS designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s UDT23AXXL02 series are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series
More informationUESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN6.6.6 UESD64B SC89-5/SOT553/SOT665 General Description The
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for
More informationPESDHC5D7VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationSP3050 Lead-Free/Green Series
RoHS Pb GREEN Description The SP3050 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events. This robust device can safely
More informationRClamp0504N RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are
More informationLC Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC4-12 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More informationPESDSC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationTClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationESD5V0SxUS. ESD5V0S5US E rotated in reel. Type Package Configuration Marking SOT363 SOT363 SOT363 ESD5V0S4US ESD5V0S5US
ESDV0SxUS MultiChannel TVS Diode Array ESD / transient protection of data and power lines in. V / V application according to: IEC00 (ESD): ± 0 KV (contact) IEC00 (EFT): 80 A (/0 ns) IEC00 (Surge): A (8/0
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationRClamp3304NA RailClamp 3.3V TVS Arrays
- RailClamp Description RailClamp low capacitance TVS array is designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationPARAMETER SYMBOL TESD5V0V4UA UNIT Marking code on the device
V WM =5V,.8pF ESD Protection Array FEATURES Meet IEC61-4-2(ESD) ±17kV(air), ±12kV(contact) Working Voltage: 5V Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC Halogen-free according
More informationSRDA3.3-4 RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SRDA series has been specifically designed to protect sensitive components which are
More informationuclamp3311pq Low Voltage µclamp for Automotive Applications PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
- MicroClamp Description The µclamp 33PQ transient voltage suppressor is specifically designed to protect sensitive components which are connected to low-voltage data and transmission lines from overvoltage
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationSP1255P Series 0.5pF, 12kV Diode Array for μusb
TVS Diode Arrays (SPA Diodes Low Capacitance ESD and Surge Protection -.pf, 2kV Diode Array for μusb RoHS Pb GREEN Description The SP2P integrates 3 channels of ultra-low capacitance steering diodes and
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationRClamp3654P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationESDCANxx-2BLY. Automotive dual-line TVS in SOT23-3L for CAN bus. Datasheet. Features. Applications. Description
Datasheet Automotive dual-line TVS in SOT23-3L for CAN bus Features AEC-Q101 qualified Dual-line ESD and EOS protection Breakdown voltage: V BR : 25 V : 27 V : 27.5 V : 38 V Bidirectional device Max pulse
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More informationuclamp3311p Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
- MicroClamp TM Description The µclamp TM series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications where low operating voltage is vital. They offer
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationUM Line ESD/EMI Protection for Color LCD Interfaces DFN General Description. Rev.06 Dec.
6 Line ESD/EMI Protection for Color LCD Interfaces UM6401 DFN12 3.0 1.6 General Description The UM6401 is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI
More informationVoidless Hermetically Sealed Unidirectional Transient Voltage Suppressors Qualified per MIL-PRF-19500/551
Available on commercial versions Voidless Hermetically Sealed Unidirectional Transient Voltage Suppressors Qualified per MIL-PRF-19500/551 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This series
More informationCDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
More informationVoidless Hermetically Sealed Surface Mount Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516
Available on commercial versions Voidless Hermetically Sealed Surface Mount Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516 DESCRIPTION This surface mount series of industry
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationESD5651N ESD5651N. Descriptions. Features. Applications. Order information. Pin1. Pin2. 4.5V, Single Li-ion Battery Port Surge Protector
4.5V, Single Li-ion Battery Port Surge Protector http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive electronic
More informationSP pF 24kV Bidirectional Discrete TVS
SP1312 11pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More information