SRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
|
|
- Dorothy Freeman
- 5 years ago
- Views:
Transcription
1 ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART phones, Gigabit Ethernet and other computer interfaces. Designed for ESD protection, the can clamp the effects of electrical fast transients on the power bus. The combines 8 low capacitance steering diodes for up to four individual data or transmission lines and one TVS diode for power bus protection. This device is available in the space-saving SOT-23-6 package configuration, which minimizes lead inductance to prevent overshoot voltages during high ESD current events. meets the IE , and requirements with ESD measured at ±30kV contact and air discharge. SOT-23-6 PAKAGE FEATURES ompatible with IE (ESD): Air 15kV, ontact 8kV ompatible with IE (EFT): 40A, 5/50ns ompatible with IE (Surge): 12A, 8/20µs - Level 2(Line- Gnd) & Level 3(Line-Line0 250 Watts Peak Pulse Power per Line(tp = 8/20µs) ESD Protection > 25 kilovolts Low lamping Voltage Protection for 4 Lines Ultra Low apacitance (Typical): 3.0pF to GND, 1.5pF to RoHS ompliant REAH ompliant APPLIATIONS Gigabit Ethernet SMART Phones Portable Electronics Video ard Interfaces USB 2.0 Interfaces DVI Interfaces MEHANIAL HARATERISTIS Molded JEDE SOT-23-6 Package Approximate Weight: 16 milligrams Lead-Free Matte Tin Solder Reflow Temperature Flammability Rating UL 94V-0 8mm Tape and Reel per EIA Standard 481 PIN ONFIGURATION GND 2 5 REF R5 7/16 Page 1
2 TYPIAL DEVIE HARATERISTIS 25 Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 P PP 250 Watts Operating Temperature T L -55 to 125 Storage Temperature T STG -55 to 150 Forward Surge Rating 25, I F = 10mA) V F 0.5 Min Max. Volts Peak Pulse urrent (tp = 8/20µs) - Note 1 I PP 12 Amps 1. Across TVS only - pin 2 to pin 5. PART DEVIE NUMBER MARKING RATED STAND-OFF V WM ELETRIAL HARATERISTIS PER 25 Unless Otherwise Specified MINIMUM 1mA V (BR) LAMPING (Fig. I P = 1A V LAMPING (Fig. I P = 5A V LAMPING (Fig. I P = 12A V LEAKAGE WM I D µa TYPIAL APAITANE ( - 1MHz pf TYPIAL APAITANE ( - 1MHz pf S5A Measured from pin to ground. 10,000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME P PP - Peak Pulse Power - Watts 1, W, 8/20µs Waveform ,000 10,000 t d - Pulse Duration - µs R5 7/16 Page 2
3 TYPIAL DEVIE HARATERISTIS I PP - Peak Pulse urrent - % of I PP t f FIGURE 2 PULSE WAVE FORM Peak Value I PP e -t t d = t/(i PP /2) TEST WAVEFORM PARAMETERS t f = 8µs t d = 20µs t - Time - µs FIGURE 3 POWER DERATING URVE Peak Pulse Power 8/20µs % Of Rated Power Average Power T A - Ambient Temperature R5 7/16 Page 3
4 SPIE MODEL FIGURE 1 SPIE MODEL V ABD Lg 0.7nH LABD - Low apacitance Avalanche Breakdown Diode (TVS) : Low apacitance Rectifier Diode Lg - Lead Inductance TABLE 1 - SPIE PARAMETERS PARAMETER UNIT ABD(TVS) BV V IBV µa jo pf I S A 1E-11 1E-13 Vj V M N R S Ohms TT s 1E-9 1E-9 EG ev R5 7/16 Page 4
5 SOT-23-6 PAKAGE INFORMATION DIM OUTLINE DIMENSIONS MILLIMETERS INHES MIN MAX MIN MAX D E A B K 0-8 D E G J L B M J K A L M ontrolling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, Dimensions are exclusive of mold flash and metal burrs. G PAD LAYOUT DIMENSIONS MILLIMETERS INHES DIM NOMINAL NOMINAL A B E B D D E ontrolling dimension: inches. A R5 7/16 Page 5
6 TAPE AND REEL t D P0 P2 10 Pitches umulative Tolerance on Tape. ± 0.2 E Top over Tape K0 A0 Pin 1 F W B0 P User Direction of Feed REEL DIA. TAPE WIDTH SPEIFIATIONS A0 B0 K0 D E F W P0 P2 P tmax 178mm (7 ) 8mm 3.20 ± ± ± ± ± ± ± ± ± ± Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA Suffix - T7 = 7 Reel - 3,000 pieces per 8mm tape. 4. Marking on Part - marking code (see page 2) and pin one defined by dot on package. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY N/A -T7 3,000 7 N/A This device is only available in a Lead-Free configuration R5 7/16 Page 6
7 OMPANY INFORMATION OMPANY PROFILE In business more than 20 years, ProTek Devices is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control Is; RF and related high frequency products. ONTAT US orporate Headquarters 2929 South Fair Lane Tempe, Arizona USA By Telephone General: Sales: & Marketing: ustomer Service: Product Technical Support: By Fax General: By Asia Sales: asiasales@protekdevices.com Europe Sales: europesales@protekdevices.com U.S. Sales: ussales@protekdevices.com Distributor Sales: distysales@protekdevices.com ustomer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore Tel: Fax: Web OPYRIGHT ProTek Devices This literature is subject to all applicable copyright laws and is not for resale in any manner. SPEIFIATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN HANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLIY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory R5 7/16 Page 7
GBLC03 - GBLC24C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationPAM08SD23xx/C Series HIGH POWERED TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED TVS ARRAYS DESCRIPTION The are transient voltage suppressor arrays designed for ESD protection of automotive applications. These silicon based diodes offer superior clamping voltage and performance
More informationPAM02SD23xx/C Series ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION The are ultra low capacitance transient voltage suppressor arrays, designed to protect automotive applications. These devices are available in either a unidirectional
More informationDSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets
More informationGBLC05CDN - GBLC24CDN
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxxCDN Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationSMP6LLCxx-2P Series RTCA DO-160G COMPLIANT PRODUCT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-16 PACKAGE APPLICATIONS FEATURES
MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line
More informationSMDB712C BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION The offers four individual asymmetrical devices in a SO-8 package. The device can be configured for 2 or 4 datalines depending on power level requirements.
More informationPSRDAxx-4A Series 500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The are low capacitance multi-line steering diode/transient voltage suppressor arrays that provides board level protection for standard TTL
More informationPSD0561 HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION DFN-2 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION The is a transient voltage suppressor array, designed to protect sensitive electronics from damage or latchup due to EOS, lightning, CDE and ESD. This
More informationPSMDA05C-4 - PSMDA24C-4
500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The PSMDAxxC-4 Series are monolithic transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against
More informationSLVU WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
600 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationUSB USB50824C 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB508xx and USB508xxC Series are multi-line ultra low capacitance transient voltage suppressor arrays that provide board level protection
More informationSM10KWxxA/CA Series RTCA DO-160G COMPLIANT PRODUCT 60 KILOWATT TVS COMPONENTS DESCRIPTION DFN-2-KW PACKAGE FEATURES APPLICATIONS
60 KILOWATT TVS COMPONENTS DESCRIPTION The are high-powered surface mount transient voltage suppression components designed to protect equipment and systems from the damaging effects of high voltage spikes.
More informationSLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More information704-15K36P RTCA DO-160G COMPLIANT PRODUCT HIGH POWER AIRCRAFT/ VEHICLE DC BUS VOLTAGE SUPPRESSOR DESCRIPTION 704 PACKAGE FEATURES APPLICATIONS
HIGH POWER AIRCRAFT/ VEHICLE DC BUS SUPPRESSOR DESCRIPTION The is a 15 kilowatt silicon transient voltage suppressors (TVS) designed for use primarily in 28 Volt aircraft applications in accordance with
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More information1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationGBLC03 - GBLC24C. This datasheet has been downloaded from at this page
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationDigital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems PARAMETER SYMBOL VALUE UNITS
HIGH POWER TVS ARRAY APPLICATIONS Digital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems SURFACE MOUNT FEATURES Junction Passivation Optimized Design Passivated
More informationPAM37SDxxAL/CAL Series RTCA DO-160G COMPLIANT PRODUCT
400 WATT TVS COMPONENT DESCRIPTION The is a transient voltage suppressor array, designed to protect applications such as consumer electronic products, automotive, telecommunications, aerospace and intelligent
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More information30KPA Series RTCA DO-160G COMPLIANT PRODUCT. 30kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
30kW POWER TVS COMPONENT DESCRIPTION The, are discrete 30,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage
More information704-15K K36T RTCA DO-160G COMPLIANT PRODUCT HIGH POWER AIRCRAFT/ VEHICLE DC BUS VOLTAGE SUPPRESSOR DESCRIPTION 704 PACKAGE 704T PACKAGE
HIGH POWER AIRCRAFT/ VEHICLE DC BUS SUPPRESSOR DESCRIPTION The 704-15K36 and 704-15K36T are 15 kilowatt silicon transient voltage suppressors (TVS) designed for use primarily in 28 Volt aircraft applications
More information5KP5.0A - 5KP440A. 5kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAMS
5kW POWER TVS COMPONENT DESCRIPTION The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY PIN CONFIGURATIONS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationPHP8.4 - PIP500 RTCA DO-160G COMPLIANT PRODUCT AC POWER BUS VOLTAGE SUPPRESSOR DESCRIPTION PHP & PIP PACKAGE FEATURES APPLICATIONS
AC POWER BUS SUPPRESSOR DESCRIPTION The PHP and PIP Series of devices are designed in accordance with DOD-STD-1399, section 300 interface standard and MIL-STD704A for shipboard systems, electrical power
More informationPSR05 STEERING DIODE / TVS ARRAY COMBO APPLICATIONS. Ethernet - 10/100 Base T FireWire Wireless Communications USB Interface
56 Only One Name Means ProTek Tion PSR5 STEERIN DIODE / TVS ARRAY COMBO APPLICATIONS Ethernet - / Base T FireWire Wireless Communications USB Interface IEC COMPATIBILITY (EN6-) 6-- (ESD): Air - 5kV, Contact
More informationCOMMUNICATIONS APPLICATIONS
COMMUNICATIONS APPLICATIONS Only One Name Means ProTek Tion Advanced circuit protection devices for overvoltage and overcurrent transient events Communication interfaces are vulnerable to a variety of
More informationRClamp0504N RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More informationPESDAWC236T5VU Low Capacitance TVS Array
Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up
More informationTClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationMM3Z2V4T1 SERIES. Zener Voltage Regulators. 200 mw SOD 323 Surface Mount
Zener Voltage Regulators mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of mw. They are designed to provide voltage regulation protection
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More informationL02U5V0MA-6C. STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION - 20 Watts ESD PROTECTION DIODE SLP4120P10
/. L2U5VMA-6C GENERAL DESCRIPTION ESD PROTECTION DIODE The L2U5VMA-6C is ultra low capacitance TVS arrays designed to protect high Speed data interfaces. This Series has been specifically designed to protect
More informationSRDA3.3-4 RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SRDA series has been specifically designed to protect sensitive components which are
More informationRClamp3654P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationWE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
More informationWS2.8LVU. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT23-3L (Top View) Document: W , Rev: C
Document: W33, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/μs) One device protects one unidirectional line Two devices protect two high-speed data line pairs Low capacitance
More informationRClamp0544M RailClamp ESD Protection for HDMI Interfaces PRELIMINARY Features
- RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which
More informationPSR05 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS IEC COMPATIBILITY (EN ) FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION SOT-143
56 PSR5 STEERIN IOE/TVS ARRA COMBO APPLICATIONS Ethernet - / Base T irewire Wireless Communications USB Interface IEC COMPATIBILIT (EN6-) 6--2 (ES): Air - 5kV, Contact - 8kV 6-- (ET): A - 5/5ns 6--5 (Surge):
More information3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//:
2-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationNUP2105LT3G. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The NUP2105L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
More informationSR2.8 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationMMBZxxxALT1G Series, SZMMBZxxxALT1G Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZxxxALTG Series, SZMMBZxxxALTG Series 24 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed
More informationPESDLC23T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is a TVS designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface
More informationMMBZ15VDLT3G MMBZ27VCLT1G SZMMBZ15VDLT3G. SZMMBZ27VCLT1G 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZ15VDLT1G, MMBZ27VCLT1G, SZMMBZ15VDLT1G, SZMMBZ27VCLT1G 40 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Cathode Zeners for ESD Protection These dual monolithic silicon zener diodes
More informationDistributed by: www.jameco.com 1-800-831-44 The content and copyrights of the attached material are the property of its owner. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The
More informationMMBZ15VDLT3G MMBZ27VCLT1G. 40 Watt Peak Power Zener Transient Voltage Suppressors. SOT-23 Dual Common Cathode Zeners for ESD Protection
MMBZ5VDLT, MMBZ7VCLT Preferred s 40 Watt Peak Power Zener Transient Voltage Suppressors SOT- Dual Common Cathode Zeners for ESD Protection These dual monolithic silicon zener diodes are designed for applications
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationTClamp3302N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationRClamp3304NA RailClamp 3.3V TVS Arrays
- RailClamp Description RailClamp low capacitance TVS array is designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationPESDHC5D7VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More information5V 4 * 1 5 ESD5344D ESD5344D. Descriptions. Features. Order information. Applications. http//:www.sh-willsemi.com
ESD5344D 4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5344D is an ultra-low capacitance TVS (Transient Voltage Suppressor)
More informationP6SMB11CAT3G Series, SZP6SMB11CAT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional*
P6SMBCAT3G Series, SZP6SMBCAT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationCDSOT236-DSL03xx - TVS Diode Array Series
*RoHS COMPLIANT Features RoHS compliant* Low capacitance < pf ESD protection Surge protection Applications ADSL / DSL cards Personal Digital Assistants (PDAs) Mobile phones and accessories Portable electronics
More informationSP1255P Series 0.5pF, 12kV Diode Array for μusb
TVS Diode Arrays (SPA Diodes Low Capacitance ESD and Surge Protection -.pf, 2kV Diode Array for μusb RoHS Pb GREEN Description The SP2P integrates 3 channels of ultra-low capacitance steering diodes and
More informationPESDSC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationMMBZxxVAWT1G Series, SZMMBZxxVAWT1G Series. 40 Watt Peak Power Zener Transient Voltage Suppressors. SC 70 Dual Common Anode Zeners for ESD Protection
MMBZxxVAWTG Series, SZMMBZxxVAWTG Series 4 Watt Peak Power Zener Transient Voltage Suppressors SC 7 Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for
More informationNUF4211MNT1G. 4-Channel EMI Filter with Integrated ESD Protection
4-hannel EMI Filter with Integrated ESD Protection The NUF4211MN is a four channel ( R ) Pi style EMI filter array with integrated ESD protection. Its typical component values of R = 100 and = 8.5 pf deliver
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSM05T1G Series, SZSM05T1G. Transient Voltage Suppressor Diode Array. SOT 23 Dual Common Anode Diodes for ESD Protection
, SZ Transient Voltage Suppressor Diode Array Dual Common Anode Diodes for ESD Protection These dual monolithic silicon TVS diodes are designed for applications requiring transient overvoltage protection
More informationuclamp3311p Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
- MicroClamp TM Description The µclamp TM series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications where low operating voltage is vital. They offer
More informationESD5311X ESD5311X 1-Line, Bi-directional, Ultra-low Capacitance http//: Transient Voltage Suppressors Descriptions
1-Line, Bi-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) designed to protect high
More informationMMBZxxxALT1G Series, SZMMBZxxxALT1G Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZxxxALTG Series, SZMMBZxxxALTG Series 24 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed
More informationNUP4302MR6T1G. Schottky Diode Array for Four Data Line ESD Protection
Schottky Diode Array for Four Data Line ESD Protection The NUP432MR6 is designed to protect high speed data line interface from ESD, EFT and lighting. Features Very Low Forward Voltage Drop Fast Switching
More informationMAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note T L = 2 C, Pulse Width = ms P PK 600 W DC Power T L = 7 C Meas
600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent
More informationLC Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC4-12 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationL13ESD5V0CE2 BIDIRECTIONAL ESD PROTECTION DIODE. STAND-OFF VOLTAGE Volts POWER DISSIPATION Watts SOD-882
BIDIRECTIONAL ESD PROTECTION DIODE STAND-OFF OLTAGE - 5.0 olts POWER DISSIPATION - 130 Watts GENERAL DESCRIPTION The is designed to protect sensitive electronics from damage or latch up due to ESD, lightning,
More informationMMBZ5V6ALT1 Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors. SOT 23 Dual Common Anode Zeners for ESD Protection
4 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for applications requiring transient overvoltage
More information1.5SMC6.8AT3 Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.SMC6.8AT3 Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMC series is designed to protect voltage sensitive components from high voltage, high energy transients. They
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationNSQA6V8AW5T2 Series Transient Voltage Suppressor
Transient Voltage Suppressor ESD Protection Diode with Low Clamping Voltage This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection.
More informationSMBJ SERIES RTCA DO-160G COMPLIANT PRODUCT 600 WATT TVS COMPONENT APPLICATIONS DO-214AA PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS
600 WATT TVS COMPONENT APPLICATIONS Power Supply AC/DC Applications Telecom DO-214AA PACKAGE FEATURES UL File Recognition #E208219 Compatible with IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible
More informationSMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package
SMF5.AT1G Series, SZSMF5.AT1G Series 2 W Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.AT1G Series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//:
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ES9N12BA is a TVS (Transient Voltage Suppressor) designed to protect sensitive electronic components which
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSRDA05-4R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 6 VOLTS
SRDA-R Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The SRDA- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT,
More informationRClamp0521P PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C) I t I PP V R.
PROTECTIO PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationPJSD05CW-AU SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
PJSD5W-AU SERIES Single Line TVS Diode for ESD Protection in Portable Electronics VOLTAGE 5 to 36 Volt POWER 35 Watt FEATURES Transient protection for data lines to IE 61-4-2 (ESD) + 15kV (air),+ 8kV (contact).78(1.95).68(1.75)
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series
Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More information