Tasks Risk Suggested controls
|
|
- Mercy Cox
- 5 years ago
- Views:
Transcription
1 Risk Assessment Name Shane Date 1/10/09 Equipment or work process being assessed Crosscutting logs in the log yard 1. Pinch points and crush injuries A. Are there any exposed or unguarded moving parts (such as gears, drive shafts, rollers, chains, sprockets, wheels) which may catch clothing or body parts? Cutting with the chainsaw. 1 Make sure that all clothing is secure and tight fitting. Wear chaps while using the saw. Keep the guide bar pointed away from the body while the saw is running. Make sure that no-one else is in the immediate area while using the saw. Use sound, low risk cutting techniques at all times. Commonwealth of Australia All rights reserved Page 1
2 B. Can anyone be crushed due to: falling material, unexpected movement of the equipment or its load, or the equipment tipping over? being thrown off or under the equipment, or being trapped between the equipment and other structures? Finishing the release cut on a log, so that it falls into two pieces. 1 Put blocks either side of the log before cross-cutting. If the log is on a slope, stand uphill before doing the release cut. Maintain good footing, and stand well clear when finishing the release cut. Use approved cross-cutting techniques at all times. 2. Cuts, punctures or strikes A. Can anyone be cut, punctured or struck from: coming into contact with sharp objects or surfaces or moving parts? work pieces or materials being ejected, or parts of the equipment disintegrating? Cutting with the chainsaw. 1 Wear all required PPE, including safety boots, chaps and face visor. make sure that no-one else is in the immediate area while cutting. Use sound low-risk cutting techniques at all times. Commonwealth of Australia All rights reserved Page 2
3 3. Hydraulic or pneumatic leaks A. Can anyone come into contact with hydraulic fluid or compressed air due to: equipment failure or misuse? any other factors? 4. Electrical A. Can anyone suffer electric shock from: exposed live contacts, or the presence of water or other conducting material? overloading of electrical circuits (including overuse of power boards)? damaged electrical leads, cables, switches, plugs or power points? 5. Manual handling and ergonomics A. Will anyone be exposed to muscle strain, sprain or back injury from: bending forwards, sideways or twisting, especially if movements are combined sudden or jerky movements, or lifting loads unevenly or to one side? lifting, pushing or pulling heavy loads? Cutting with the saw. 3 Use good manual handling practices, including keeping back straight and bending with the knees wherever possible. Avoid twisting. Commonwealth of Australia All rights reserved Page 3
4 B. Will anyone be exposed to muscle strain, sprain or back injury from: handling objects that are too heavy without having help available? working in cramped or awkward spaces, or on uneven ground or slippery floors? reaching above shoulder height or below knee level Preparing logs for cutting. 3 Ask the loader driver to reposition logs if they need to be moved. Make sure there is an adequate space between the logs when they are laid out. C. Will anyone be exposed to muscle strain, sprain or back injury from: vibrations or jarring? moving materials over a long distance or handling loads that can t be held close? staying in one position, especially bent, or carrying out fast repetitive actions? 6. Controls and isolation A. Are any controls not clearly marked, or out of easy reach of operators? Commonwealth of Australia All rights reserved Page 4
5 B. Is there any problem in isolating the equipment from all sources of energy (such as through tagging out or locking out)? 7. Slips and falls A. Can anyone fall from a height (such as from a lack of guardrails or fallback cages)? B. Can anyone be exposed to trip or slip hazards from parts, fittings, surfaces, floors or substances? Commonwealth of Australia All rights reserved Page 5
6 8. Personal protective equipment A. Does the activity require the use of a dust mask or respirator? B. Does the equipment operate in a high noise area or at a noise level that may require the use of hearing protection? Cutting with the chainsaw 1 Wear ear muffs C. Will anyone be exposed to flying particles that may require the use of eye protection? Cutting with the saw 1 Wear a face visor Commonwealth of Australia All rights reserved Page 6
7 D. Do operators need any other items of PPE (such as high visibility vests)? Working in the log yard 1 Wear a high vis vest and safety boots. 9. Lighting A. Are any areas poorly lit, particularly around: operational parts of the equipment? general work areas and thoroughfares? Working in the log yard outside daylight hours. 1 Only use the chainsaw while there is good daylight. 10. Fatigue management A. Is fatigue likely to be a factor in the operator s ability to concentrate and work safely (such as through working long hours, unpredictable hours or variable shift rosters)? Working on overtime 2 Do not use the saw when fatigued. Commonwealth of Australia All rights reserved Page 7
8 11. Traffic control A. Are there likely to be other vehicles or pedestrians in the work area or thoroughfares while the operator is working? Working in the log yard 1 Make sure that all personnel follow the site policies that require everyone to wear high vis and to avoid going into the log cutting area while work is taking place. Ensure that all personnel on foot make eye contact with the loader driver and are waved through before they venture into the log yard. Sign-off Name Shane Signature Date 1/10/09 Commonwealth of Australia All rights reserved Page 8
Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 9
Issue Date: Review Date: Page Number: 1 of 9 1. Hazard Management Details General Plant/Equipment Item: BISCUIT JOINER Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity:
More informationPOTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.32.1 Revision Date: 03/12/2014 Radial Arm Saw Safety 1. PURPOSE 1.1. To provide operational guidelines on the safe use of Radial Arm Saws found in woodworking shops at Thompson Rivers University
More informationTools Hand and Power. OSHA Office of Training and Education 1
Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed
More informationNorth Dakota State University Power Tool Operations and Maintenance
North Dakota State University Power Tool Operations and Maintenance I. Introduction This NDSU procedure provides guidelines for the use of power tools. The intent is to establish proper safety procedures
More informationLumber Smith. Owners Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Owners Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 General Safety Instructions Failure to follow these
More informationWall Mount Assembly and Mounting Guide (55 /84 )
Microsoft Surface Hub Wall Mount Assembly and Mounting Guide (55 /84 ) For mounting on a wall with wood studs These instructions assume wood-stud wall construction with 2-by-4 studs spaced 16 inches apart,
More informationMy Background. Session Topics. General Industry Standards. Variety of Tools Covered. Related Standards/Hazards 1/27/2014
My Background Shop Safety: Equipment and Tools Mary Bauer UW Extension Webinar January 28, 2014 Mary Bauer CIH, CSP Compliance Assistance Specialist Eau Claire, WI 54701 715-832-9019 28 years w/ OSHA 20
More informationPress Snap Soil Pipe Cutter
Press Snap Manual Press Snap Soil Pipe Cutter 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com! Read this Operator s Manual carefully
More informationOperating and Maintenance Instructions Keep for future reference
Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter 1 Index SAFETY... 3 LABELS.... 4 QUICK GUIDE including storage and transport... 5 IN-DEPTH INSTRUCTIONS.... 6 OPERATING
More informationHABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy
HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration at any construction site. Building construction is
More informationSafe use of meat bandsaws
Guidance note Safe use of meat bandsaws This information sheet provides practical advice for employers about controlling hazards while using meat bandsaws. February 2011 Background Meat bandsaws are commonly
More informationYale Environmental Health & Safety
Yale Environmental Health & Safety Equipment/Task Name: Equipment/Task Hazard Class: Shop Name: PANEL SAWS 4 http://ehs.yale.edu/forms-tools/toolclassification-matrix Shop Hazard Class: Purpose Panel saws
More informationOperating and Maintenance Instructions
!! Operating and Maintenance Instructions Keep for future reference PTO400 Log Splitter 1 Index INDEX...2 SAFETY...3 LABELS..4 QUICK GUIDE including storage and transport... 5 IN DEPTH INSTRUCTIONS...
More informationMAKER LAB Safety Instructions Power Tool Training
MAKER LAB Safety Instructions Power Tool Training Note: All the instructions from Basic Training apply to Power Tool Training. If you have not completed Basic Training, do so before you complete Power
More informationRisk Assessment & Safe Working Practice
RA Ref Number: 34b Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Installing Conduit Next Review Date: 01/04/2019 Notes: Please refer to Safe Working
More information853 PRO. Concrete Cutting Chainsaw OPERATOR S MANUAL. ICS, Blount Inc SE International Way Portland, OR
853 PRO Concrete Cutting Chainsaw OPERATOR S MANUAL ICS, Blount Inc. 4909 SE International Way Portland, OR 97222 www.icsbestway.com Copyright ICS 2003 P/N 71904 12/03 TABLE OF CONTENTS SYMBOLS & LABELS
More informationRisk Assessment & Safe Working Practice
RA Ref Number: 34a Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Installing Conduit - Flexible Next Review Date: 01/04/2019 Notes: Please refer to
More informationOXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE
OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12
More informationSafe use of metal turning lathes
Guidance Note Guidance Note Safe use of metal turning lathes Safe use of metal turning lathes This information sheet and table provide practical advice to employers about controlling hazards while using
More informationBB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationPortable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand
More informationSafe use of metal turning lathes
Guidance Note Safe use of metal turning lathes This information sheet and table provide practical advice to employers about controlling hazards while using metal turning lathes. June 2017 Background Metal
More information8 TONNE LOG SPLITTER
8 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 9 PART NO: 3402043 OPERATION & MAINTENANCE INSTRUCTIONS LS03/16 INTRODUCTION Thank you for purchasing this CLARKE 8 Tonne Log Splitter. Before attempting to use
More informationHedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850.
Operator s manual Manual d utilisation Manual de instrucciones Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. GB English FR ES
More informationPOTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.48.1 Revision Date: 01/14/2015 Safe Operating Procedures for RIDGID 535 1. PURPOSE 1.1. To provide operational guidelines on the safe us of the RIGID 535 Pipe Threader used in the Trades
More information6.3 Hazards Associated with Wood-Based Panels
6.3 Hazards Associated with Wood-Based Panels The hazards (the way in which an object or a situation may cause harm) associated with wood-based panels can be divided into two categories, i.e. handling
More informationHedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones
HÄcksaxtillsats HA110 HA850 Jonsered Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) GB FR ES Operator s manual Manual d utalisation Manual de instrucciones KEY TO SYMBOLS
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationOperators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series
Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series! WARNING! Inappropriate use of rock saw may cause serious injury or death. Operators must read this manual before use and
More informationSafe Work Method Statement SWMS 81213
Safe Work Method Statement SWMS 81213 This safe work method statement is generic in nature. It documents the risks and hazards associated with each step of a task and the control measures in place to minimise
More informationUS RACK, Inc Falcon Drive, Madera, CA
US RACK, Inc - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTALLATION AND USE INSTRUCTIONS for Long-John Extension Ladder Rack WARNING: Do NOT attempt to install or use this rack without following
More informationSurface planer or buzzer. Performs the tasks of dressing, squaring and straightening timber Machining short lengths of timber. Without the bridge guard. Without the appropriate training. Without PPE. Set
More informationHandout Activity: HA012
Drills & drill bits Engines: Motive Power Types: Handout Activity: HA012 HA012-2 Student/Intern information: Name Date Class Drills & drill bits Summary Drills can be portable or bench mounted. A bench
More informationHedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850
Operator s manual Manual d utalisation Manual de instrucciones Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 GB FR ES KEY TO SYMBOLS
More informationWelding Lab Safety Test
Welcome to the Welding Certification Center Welding Program. Thank you for your interest and your enrollment. In order to ensure your safety and the safety of your fellow students, we have prepared this
More informationaccidents which arise due to nonobservance and the safety information herein. SPECIFICATIONS
7 TON ELECTRIC LOG SPLITTER Model: 05620 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationSAFETY INFORMATION PACKET
WILLOWCREEK MIDDLE SCHOOL SAFETY INFORMATION PACKET GENERAL SHOP SAFETY 1 WIDE BELT SANDER 2 BAND SAW 3 MITER SAW 4 UP- CUT SAW 4 PLANER 6 TABLE SAW 7 DRILL PRESS 8 LATHE 8 DISK / VERTICAL BELT SANDER
More informationMAHLE CBP-10 / CBP-10A & CSP-10 / CSP-10A. Operation Manual Shop press
MAHLE CBP-10 / CBP-10A & CSP-10 / CSP-10A EN Operation Manual Shop press en 2 CBP-10 / CSP-10 EVERY PERSON WHO OPERATES THIS EQUIPMENT NEEDS TO KNOW AND UNDERSTAND ALL OF THE INFORMATION IN THIS MANUAL
More informationImpact Wrench. 19 mm (3/4 ) MODEL 6906
Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationMachine Guarding. OSHA Office of Training and Education 1
Machine Guarding OSHA Office of Training and Education 1 Introduction Crushed hands and arms, severed fingers, blindness - the list of possible machinery-related injuries is as long as it is horrifying.
More informationUse of tools Summary: Billhook
No P1: Out of Classroom Page 1 of 10 APPENDIX 8: METHOD STATEMENTS Use of tools Summary: Billhook Check tang is secure in shaft. Check that blade is sharp If using as a swinging tool - ensure no-one is
More informationHow to use a bow saw Muddy Faces Ltd
How to use a bow saw Muddy Faces Ltd This card gives guidelines on how to introduce and use bow saws safely with a group aged 8 yrs +. The following process may be split up over a number of sessions or
More informationHome Workshop System WARNING. MARK V Model 500. Summary Manual. Designed and Built in Dayton, Ohio.
Shopsmith Mark V Home Workshop System MARK V Model 500 Summary Manual Designed and Built in Dayton, Ohio. WARNING Read the SAFETY information in the Introduction section and complete the ASSEMBLY AND ALIGNMENT
More informationSafe Operating Procedure ELECTRIC DRILL
Safe Operating Procedure ELECTRIC DRILL DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT OPERATIONAL SAFETY
More informationCircular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationEnvironmental Health and Safety Office Hazardous Dust Control Guide
Created February 2012 Table of Contents A. Purpose and Policy... Page 2 B. Introduction to Wood Dust...Page 2 C. Introduction to Combustible Dust.Page 3 D. House Keeping..Page 3 E. Other Hazards...Page
More informationH8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP)
SERVICE MANUAL H8508 Impact Wrench Model 48755 (Serial Code FWN) Model 48760 (Serial Code FWP) Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationAGV XE. Original instructions
AGV 13-125 XE Original instructions Technical Data,Safety Instructions, Specified Conditions of Use, Mains connection, Maintenance, Symbols Please read and save these instructions! English I II III IV
More informationLos Angeles Unified School District Division of Adult and Career Education LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SCHOOL: AREA: SAFETY TEST FOR INDUSTRIAL EDUCATION AUTO MECHANICS Name of Student: Date: Address: Phone: Date Enrolled: Date of
More informationMachining Laboratory Regulations and Safety
Machining Laboratory Regulations and Safety General Laboratory Regulations Each person using the manufacturing laboratory is expected to comply with the following rules and regulations failure to do so
More informationDust RIGHT. Shop Vacuum Dust Hose Reel Instructions
Dust RIGHT Shop Vacuum Dust Hose Reel Instructions Review full instruction manual prior to use for important safety information. Always check Rockler.com to confi rm that you are using the most recent manual
More informationAngle Grinder MODEL 9553B MODEL 9555B
ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationGENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationImpact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationSINGLE SLIDE RAIL INSTALLATION INSTRUCTIONS
SINGLE SLIDE RAIL INSTALLATION INSTRUCTIONS 1 Introduction The Single Slide Rail can be used up to a depth of 4m and a maximum width 5.8m wide. It is best suited for laying longer lengths of pipe and larger
More informationGENERAL SAFETY PERSONAL PROTECTIVE EQUIPMENT
WORKBOOK Before you step on the jobsite, familiarize yourself with these basic safety topics to avoid costly sometimes fatal mistakes. It s up to you to take an active role in supporting safety and security
More informationOperate and Maintain Chainsaws
Operate and Maintain Chainsaws National code - AHCARB205A Welcome Welcome to Treetec s course on how to operate and maintain chainsaws. The course is the national unit of competency titled Operate and
More informationSafeguarding Machinery
Safeguarding Machinery Safeguards are essential for protecting workers from preventable injuries caused by moving machine parts. Any machine part, function, or process that may cause injury must be safeguarded.
More informationUNIVERSAL WORKSTATION
ASSEMBLY AND OPERATING INSTRUCTIONS UNIVERSAL WORKSTATION FOX Model F50-179 1 Universal Workstation FOX MODEL F50-179 TABLE OF CONTENTS Safety instructions Page 3 Specific safety instructions for workbenches..
More informationANGLE GRINDER STAND USER GUIDE AFTER SALES SUPPORT
ANGLE GRINDER STAND USER GUIDE Important: retain for future reference - please read carefully. Now you have purchased a WORKZONE product you can rest assured in the knowledge that as well as your 1 year
More informationkuk / la / law / lui / leung
kuk / la / law / lui / leung OFFER NEW INTERACTION BREAK THROUGH CORE COMPETENCIES SKETCHES & IDEATION NEW EXPERIENCE INCREASING BRAND VALUE UNDERSTAND CLIENT + BRAND DEVELOPING CONSTRAINTS DEFINING CONTEXT
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Shear Wrench 69NB 00498 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 69NB Bolt size M6, M0, M
More informationCollege of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
More informationCorner Key Doweling Jig Instructions Effective July 2018
Corner Key Doweling Jig Instructions Effective July 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent
More informationBefore use please read & understand this manual, paying particular attention to the safety instructions.
OPERATOR S MANUAL AND PARTS LIST 12 HAND PUSH ROLLER MOWER - THHMR Sales & Helpline 01793 333220 www.thehandy.co.uk Before use please read & understand this manual, paying particular attention to the safety
More information1/4in. SHEET PALM SANDER
1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor
More informationC a r r i a g e A s s e m b l y R e p l a c e m e n t
E1 TF-CR C a r r i a g e A s s e m b l y R e p l a c e m e n t October 2007 Software Version 5.0 and higher IMPORTANT! TigerStop must be enabled with a code that must be obtained from TigerStop Customer
More informationElectric Chainsaw Sharpener
FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications
More information2017 UPDATED INSTALLATION INSTRUCTIONS
2017 UPDATED INSTALLATION INSTRUCTIONS with square composite or round metal balusters Manufactured by fiberondecking.com 800.573.8841 Horizon Railing 6 ft. and 8 ft. Installation Instructions Required
More informationReducing Injuries: Using Power Tools at Work and at Home!
Reducing Injuries: Using Power Tools at Work and at Home! Action - Reaction.2 of a second can change your whole life! Action - Reaction Circular Saw at 4700 rpm.2 second = 15.6 revolu=ons 16 tooth blade
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationOPERATING A CONCRETE TESTING MACHINE
LABORATORY SAFETY ANALYSIS Department of Engineering Technology OPERATING A CONCRETE TESTING MACHINE Location: Smith 133 Required Training: The Forney concrete testing machine is designed and intended
More informationSAFE WORK METHOD STATEMENTS MBS CPD Points
SAFE WORK METHOD STATEMENTS MBS 7.01 2 CPD Points Copyright and Disclaimer: MyBuildingSite Pty Ltd (MBS) owns the copyright of the content on this website, unless otherwise stated. The courses and information
More informationHealth & Safety Policy and Procedures Manual SECTION 5 HAND AND POWER TOOLS
SECTION 5 HAND AND POWER TOOLS 1. POWER TOOLS A. References: 29 CFR 1926 Sub Part I (300-307) B. Employees using hand and power tools and exposed to the hazard of falling, flying, abrasive, and splashing
More informationSG4 Shotgun Shoe Group for 555 Series Electric Benders
INSTRUCTION MANUAL SG4 Shotgun Shoe Group for 555 Series Electric Benders Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationD165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL
D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL 8-11-11 General Machinery Safety Instructions Machinery House requires you to read this entire Manual before using this
More informationACREAGE SEEDER / PLANTER OWNER S MANUAL
ACREAGE SEEDER / PLANTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information48" Wide Landscape Rake
48" Wide Landscape Rake OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationLOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR AUTO MECHANICS PROGRAM
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR AUTO MECHANICS PROGRAM School: Industry Sector: Transportation Class: Date: Teacher: Room: (Please Print) Your
More informationWORK CREW SAFETY MANUAL
WORK CREW SAFETY MANUAL Introduction Safety is everybody s concern and is always an important consideration at any construction site. Building construction can be one of the most dangerous occupations.
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill MHP6 0088 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MHP6 Concrete 6 mm Capacities
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Kymco MXU 250
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 72008 Application: Kymco MXU 250 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we
More informationHazard Identification and Risk Assessment Form. Risk Assessment
Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. Equipment mostly used by the. Selected trainees would
More informationSAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.
SAFETY DIRECTIVE Title: Hand and Power Tools Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This
More informationQUICK CONNECT SYSTEM IMPACT DRIVER ATTAChMENT www.blackanddecker.com.au Australia BDCMTI-XE New Zealand PARTS AND FEATURES 1. Impact Driver attachment 2. 6.35 mm (1/4 ) hex quick-release chuck 2 1 Additional
More informationMotorized Tower Raising System Manual
Motorized Tower Raising System Manual Introduction and Safety Guidelines Important! Read through the manual in its entirety prior to assembly and installation of the motorized tower raising system. WARNING:
More informationOPERATION & MAINTENANCE INSTRUCTIONS
FOOT OPERATED 1.5 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 10 PART NO: 3402046 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Foot Operated 1.5 Tonne Log Splitter.
More informationSafety Instructions Manual Original Instructions - RRM2
Radius Roller RRM2 Safety Instructions Manual Original Instructions - RRM2 Safety Manual 1 General Operator and Supervisor Information Signal Word Definition Signal Word Panel 2 Shop Press Signal Word
More informationHigh Density Sports Storage
Owner s Manual High Density Sports Storage CONTENTS Safety...........................................2 General......................................2 Installation...................................2 Usage.......................................2
More informationELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0
ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4
More informationHand Safety and Injury Prevention
Hand Safety and Injury Prevention Mitchell Kemp Cummins Sales and Service - Gulf Region 14 February 219 Approach Corporate Policy Business Unit policy Implementation and Maintenance Team (IMT): Site safety
More informationPlease read through and understand this manual before using the tightening tool. Original manual
MANUAL GEARED TRACK Tightening TOOL Please read through and understand this manual before using the tightening tool. Original manual December 2008 ENG www.olofsfors.se Tel. +46 (0)930-311 40 Olofsfors
More informationPORTABLE PULLER 55 Ton Capacity
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationNorth West Facilities Ltd Gaerwen Industrial Estate Gaerwen Isle of Anglesey LL60-6HR Tel: Fax: Mobile:
North West Facilities Ltd 17-18 Gaerwen Industrial Estate Gaerwen Isle of Anglesey LL60-6HR Tel: 01248-422555 Fax: 01248-422556 Mobile: 07891-557581 Project/Contract Second fix Joinery Principle Contractor
More informationSAFETY AND OPERATING MANUAL. Portable versatile workstation
SAFETY AND OPERATING MANUAL Original instructions Portable versatile workstation wu063 1 2 3 4 5 6 7 8 9 Safety instructions Warning! When using this product basic safety precautions should always be followed.
More informationPORTABLE BULLET TRAP ASSEMBLY & OPERATION/MAINTENANCE MANUAL REVISION 2.0. ACTION TARGET 3411 Mountain Vista Pkwy Provo, UT 84606, USA
PORTABLE BULLET TRAP ASSEMBLY & OPERATION/MAINTENANCE MANUAL REVISION 2.0 ACTION TARGET 3411 Mountain Vista Pkwy Provo, UT 84606, USA PORTABLE BULLET TRAP ASSEMBLY & OPERATION/MAINTENANCE MANUAL COPYRIGHT
More informationPolicy Sponsor: Assistant Vice President Facilities Management. Responsible Unit: Trade Services
Safe Work Instructions for Powered Mitre Cut Hack Saw (Mitercut Model 220M) Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: November 2016
More informationChoosing, Designing, & Building a Hydraulic Log/wood Splitter
Choosing, Designing, & Building a Hydraulic Log/wood Splitter Part 1 - "Deciding on what type of log/wood splitter will best fit your needs" - Covers 4 common styles of hydraulic log/wood splitter & pros/cons
More information3pt 60 Spike Aerator OWNER S MANUAL
3pt 60 Spike Aerator OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationThanks for shopping with Improvements! 7 ft. Wall Christmas Tree w/ Stand Item #419359
Thanks for shopping with Improvements! 7 ft. Wall Christmas Tree w/ Stand Item #419359 IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. PARTS LIST: NOTES: (1) Tree Section A (1) Tree Section B (1)
More information