Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions
|
|
- Tracy Watts
- 6 years ago
- Views:
Transcription
1 Dust RIGHT Shop Vacuum Dust Hose Reel Instructions Review full instruction manual prior to use for important safety information. Always check Rockler.com to confi rm that you are using the most recent manual version for your product.
2 GENERAL SAFETY WARNINGS This product is designed for specific applications as defined in the instructions and should not be modified and/or used for any other applications. Before using the Shop Vacuum Dust Hose Reel, read, understand and follow all instructions and safety information provided. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. > Always confirm that you are using the most recent version of the Instructions and safety warnings for your product. To find the most recent version, find the product page on Rockler.com and click on the link to the Instructions. > For any tool used in conjunction with this product, always read, understand and follow the instructions and safety warnings in the owner s manual for that tool. If you do not have the owner s manual, obtain one from the tool s manufacturer before using it with this product. > Before using this product, review and verify that all tools to be used with it have safety equipment installed and are in proper working order as defined by the tools owner s manuals. > Do not use this product until you have read and are confident you understand: Product Specific Safety Warnings (Below); Assembly (pp. 3-); Mounting to Wall Studs (pp. 6); Attaching Hoses (pp. 7); Controlling Unwinding Speed (pp. 7). > Remain alert and use good judgment when using this tool. Do not use this tool if you are in any way impaired by medications, alcohol, drugs or fatigue. > Dress appropriately and remove all jewelry, secure loose clothing and tie up long hair before using this tool. > It is the sole responsibility of the purchaser of this product to ensure that any third party whom you allow to use this product reads and complies with all the instructions and safety precautions outlined in this manual prior to use. > Maintain these instructions and warnings as long as you own the product. Keep this booklet in a place where it will be readily available for reference. > The user assumes all risk and responsibility for the proper use of this product and for ensuring product suitability for intended application. > Always wear safety glasses in compliance with ANSI safety standards and hearing protection and follow all standard shop safety practices, including: Keep your work area well lit and clean; Unplug all power tools before making any adjustments or changing accessories; Use dust collection tools and dust face masks to reduce exposure to dust; Use accessory safety equipment such as featherboards, push sticks and push blocks whenever appropriate; Do not use power tools in explosive environments (e.g., in the presence of flammable liquids, fumes or dust); Keep children and bystanders away from the tool operating area; Maintain proper footing at all times and do not overreach; Do not force the tool. > These warnings and instructions do not represent the total of all information available regarding tool safety, use and technique. Please read the full manual before using this product and always seek out opportunities to learn more and improve your skills and knowledge. Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known ot the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to PRODUCT SPECIFIC SAFETY WARNINGS > Failure to mount the Hose Reel according to the included instructions could result in personal injury or damage to property. > Do not mount the Hose Reel higher than your own shoulder height. > Do not hang or allow anyone else to hang from the Hose Reel. > Do not hang or coil objects other than the specified Shop Vacuum Hose from the Hose reel. > Do not leave uncoiled dust hoses on the floor as they can cause tripping hazards. > The Shop Hose Reel is intended for dry vacuuming only. Vacuuming wet materials will cause hose clogging 2
3 1 3 2 Base Assembly Assembly Base Assembly 1. Attach the Left Hub/Side Assembly (1) to the Base Plate (2), using 1/"-20 x /8" Panhead Screws () and 1/" Lock Nuts (). The Side Plate goes on the outside of the tabs on the Base Plate (2). 2. Attach the Right Side Plate (3) to the Base Plate (2), using 1/"-20 x /8" Panhead Screws () and 1/" Lock Nuts (). The Side Plate goes on the outside of the tabs on the Base Plate (2). PARTS LIST Quantity 1 Left Hub/Side Assembly 1 2 Base Plate 1 3 Right Side Plate 1 1/"-20 x /8" Panhead Screw 22 1/" Lock Nuts 22 3
4 PARTS LIST Quantity Quantity 6 Right Hub 1 7 Internal Flange Pivot 1 8 1/"-20 x 7/8" Flat-Head Screw 3 9 Right-Hand Swivel /"-20 x 3/" Flat-Head Screw 2 11 Four-Star Knob 1 12 Right-Hand Clamp 1 13 /16"-18 x 1 " Hex Bolt 1 1 Handle 1 1 /16-18 Lock Nut 1 16 Center Hub 1 17 Washer 1 18 Hose Retaining Strap 1 19 #8-32 x /8" Panhead Screw 1 20 #8-32 Lock Nut /8" x 2" Lag Screw 22 3/8" Washer Right Hub Assembly - Shown without Base Plate (2) and Left Hub/Side Assembly (1) attached for clarity Right Hub Assembly 1. Working from the inside face of the Right Hub (6), fit the Internal Flange Pivot (7) through the center hole and attach, using three 1/"-20 x 7/8" Flat-Head Screws (8) and 1/"-20 Lock Nuts (). 2. From the other side of the Right Hub (6), slide the Right-Hand Swivel (9) onto the Internal Flange Pivot (7) until the narrow end of the Right-Hand Swivel (9) piece seats in the hole in the center of the Right Hub (6). 3. Fit the Right-Hand Clamp (12) onto the outside face of the Right Side Plate (3), using the center and fastener holes as a guide, and attach the clamp, using two 1/"-20 x 3/" Flat-Head Screws (10) and 1/"-20 Lock Nuts (). Thread the Four-Star Knob (11) into the Right-Hand Clamp (12), but don t tighten.. Position the Right Hub assembly on the inside of the Right Side Plate (3) so the Right-Hand Swivel is against the Right Side Plate and the Internal Flange Pivot (7) fits into the center hole and through the opening in the Right-Hand Clamp (12). Tighten the Four-Star Knob (11) to hold the assembly together (but don t overtighten).. From the inside of the Right Hub (6), insert the /16"-18 x 1 " Hex Bolt (13)through the Internal Flange Pivot (7). Thread the Handle (1) onto the hex bolt and secure with the /16"-18 Lock Nut (1).
5 Center Hub Assembly Center Hub Assembly 1. If you fully tightened the screws and nuts connecting the Right and Left Side Plates to the Base Plate, loosen them a bit to provide working space for installing the Center Hub (16). 2. Position the Center Hub (16) between the Right and Left Hubs, taking care to align the fastener holes/slots.. Retighten the screws and nuts connecting the Right and Left Side Plates to the Base.. Attach the Hose Retaining Strap (18) to the inside face of the Right Hub (6), using the #8-32 x /8" Panhead Screw (19), Washer (17) and #8-32 Lock Nut (20). 3. Attach the Center Hub (16) to the Right and Left Hubs, using 1/"-20 x /8" Panhead Screws (), Washers (17) and 1/"-20 Lock Nuts (). Work from the outside faces of the hubs, so that the screw heads and washers are on the outside and the nuts are against the flange of the Center Hub (16).
6 Fig. 1 Mounting to Wall Studs 1. The Hose Reel must be mounted to wall studs spaced 16" on center. 2. Mark the locations for the top two mounting screws and drill pilot holes for 3/8" x 2" Lag Screws (21). 3. Fit a 3/8" Flat Washer (22) onto each screw. Drive the screws into the studs until they re about 1" from being fully seated.. Decide whether you want the Handle of the Hose Reel to be on the right or the left side. Orient the Hose Reel as desired and lift it onto the top two 3/8" x 2" Lag Screws (21). Fig. 1.. Mark the locations for the bottom two 3/8" x 2" Lag Screws (21), using the bottom keyhole slots in the Base Plate (2) as a guide. 6. Lift the Hose Reel off the top two Lag Screws (21) to remove it. Drill pilot holes for the lower set of Lag Screws (21). 7. Return the Hose Reel onto the top two Lag Screws, making sure that the 3/8" Washers (22) make it through the keyhole openings in the Base Plate (2). Check that the Hose Reel is level and then drive the 3/8" x 2" Lag Screws (21) until they are fully tightened. Fig. 1. Inset. 8. Fit a 3/8" Flat Washer (22) onto each of the remaining two 3/8" x 2" Lag Screws (21) and drive the screws into the lower two pilot holes to fully secure the Hose Reel. Fig. 2 6
7 Fig. 3 Attaching Hoses 1. Attach your 11 2" hose to a port that has a 21 " outside diameter on one end. 2. Press the 21 " OD end of the port into the Shop Vacuum Port on the inside of the Hose Reel. Fig Unscrew the Hose Retraining Strap (18) from the Right Hub (6) and fit the strap around the hose.. Make sure there s enough slack in the hose to prevent kinking and reattach the Hose Retraining Strap (18) to the Right Hub (6). Fig. 3.. The Shop Vacuum Port on the outside of the Hose Reel has an OD of 21 2" and an ID of 21 ". You can fit 21 2" hose directly onto the port and secure it with a hose clamp, or you could use a fitting like the 21 2" Swivel Fitting for Shop Vacs (31660, sold separately). Controlling Unwinding Speed 1. Once the 11 2" hose is connected, loosen the Four-Star Knob (11) and use the handle to wind the hose fully onto the Hose Reel. The reel can accommodate up to 0' of 11 2" hose. 2. Gently pull the hose to begin unwinding. Tighten or loosen the Four-Star Knob (11) to adjust the resistance, but be careful not to overtighten or you could damage the mechanism. Fig.. Check Rockler.com for updates to these instrutions. If you have further questions, please contact our Technical Support Department at or support@rockler.com 11 Fig. 7
8 22 Rev 06/17 Distributed by Rockler Companies, Inc Rockler Woodworking and Hardware
Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions. For safe and effective operation, please read these instructions fully before use.
Dust RIGHT Shop Vacuum Dust Hose Reel Instructions For safe and effective operation, please read these instructions fully before use. GENERAL SAFETY WARNINGS This tool is designed for specific applications
More informationRail Coping Sled Instructions
Rail Coping Sled Instructions GENERAL SAFETY WARNINGS This tool is designed for specific applications as defined in the instructions and should not be modified and/or used for any other applications. Before
More informationTable Saw Small Parts Sled Instructions
Table Saw Small Parts Sled Instructions Effective May 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most
More information3 1 2" Louver Template Set Instructions
3 " Template Set Instructions Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your
More informationCorner Key Doweling Jig Instructions Effective July 2018
Corner Key Doweling Jig Instructions Effective July 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent
More informationEllipse/Circle Router Jig Instructions
Ellipse/Circle Router Jig Instructions Effective January 018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most
More informationDisc Sander Angle Jig Instructions
Disc Sander Angle Jig Instructions Congratulations on the purchase of your new Disc Sander Angle Jig! It allows you to sand precise angles on the end of your workpiece and to sand perfectly round circles.
More informationWall Mount Dust Collector 650 CFM Instructions
Wall Mount Dust Collector 650 CFM Instructions Effective Febuary 2018 Review full instruction manual prior to use for important safety information. Always check Rockler.com to confirm that you are using
More informationEllipse/Circle Router Jig Instructions
Ellipse/Circle Router Jig Instructions The Ellipse/Circle Router Jig allows you to use your plunge router to easily cut precise ellipses and circles for picture frames, mirrors, signs and more. For safe
More informationCompact Router Ellipse/ Circle Jig Instructions
Compact Router Ellipse/ Circle Jig Instructions The Compact Router Ellipse/Circle Jig allows you to use your compact plunge router to easily cut precise ellipses and circles for picture frames, mirrors,
More informationBlum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018
Blum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018 Finish Tab Cup Diameter Cup Depth Minimum Door Thickness Nickel 3mm 35mm 11mm 16mm (.63") Maximum Door Thickness
More informationPro Lift Instructions
Pro Lift Instructions Effective January 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual
More informationREVISED VERTICAL MURPHY BED HARDWARE KIT INSTRUCTIONS Revised November 2017
REVISED VERTICAL MURPHY BED HARDWARE KIT INSTRUCTIONS Revised November 2017 Review instructions fully prior to use for important safety information. Always check Rockler.com to confirm that you are using
More informationPLANISHING HAMMER STAND OWNER S MANUAL
PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationMortising Attachment
Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationFraming Table INSTRUCTIONAL MANUAL KFT4X8. 5/2018 CT6071 Rev D
Framing Table INSTRUCTIONAL MANUAL KFT4X8 5/2018 CT6071 Rev D 1. Table of Contents Thank you for your purchase! Kreg Tool Company is proud to manufacture top quality machines that are surpassed only by
More informationDUST COLLECTOR 70 GALLON, 2 HP
DUST COLLECTOR 70 GALLON, 2 HP Model 45378 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight
More informationINSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
More informationOPERATION & MAINTENANCE
DOUBLE HEADED METAL NIBBLER MODEL NO: DHC-2 PART NO: 6500233 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Double Headed Metal Nibbler. Before attempting
More informationPLATE JOINER 4 INCH. ASSEMBLY and OPERATING INSTRUCTIONS. Distributed Exclusively by Harbor Freight Tools
PLATE JOINER 4 INCH 38437 ASSEMBLY and OPERATING INSTRUCTIONS Distributed Exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights
More informationPRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE
PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE 92778 1 GENERAL SAFETY INFORMATION For your safety, please read these instructions carefully before use and keep them in the
More informationROLLER STAND WITH TWO-LEG SUPPORT ASSEMBLY AND OPERATING INSTRUCTIONS
ROLLER STAND WITH TWO-LEG SUPPORT 95621 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2006 by Harbor Freight
More informationFinger Jointer. Operating and Safety Instructions FJA300
Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation
More informationOwner s Manual #TSGUARD
Owner s Manual #TSGUARD PSI Table Saw Dust Collection Guard The ideal solution for table saw dust control. Version 3, 02/04 2004 PSI Woodworking Products 9900 Global Rd., Philadelphia, PA 19115 WARRANTY
More informationVariable Speed Cast Iron Midi Wood Lathe
01936 Variable Speed Cast Iron Midi Wood Lathe Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. 1 Technical Data Input voltage
More information12 Slip Roll. Model Assembly & Operating Instructions
12 Slip Roll Model 36698 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationLCD LIFT Flat Panel Display System Installation Manual. Table of Contents
LCD LIFT Flat Panel Display System Installation Manual Table of Contents Page Installation Overview... 2 Trim Ring Installation... 3 LCD Lift Installation....4 Actuator Switch Installation.5 Top Plate
More informationPowermatic Model 31A Combination Belt-Disk Sander
OPERATING PROCEDURE FOR: Powermatic Model 31A Combination Belt-Disk Sander INTRODUCTION: The combination belt-disk sander is used to sand the edges of boards. It can be used to smooth the edge or to remove
More informationASSEMBLY AND OPERATING INSTRUCTIONS
Work Bench 91835 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.
More information3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at:
3 IN 1 HEAVY DUTY TILE CUTTER Model 41711 ASSEMBLY Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in
More informationMantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationOPERATOR'S MANUAL ROUTER MOUNTING KIT
OPERATOR'S MANUAL MOUNTING KIT 4950301 (FOR USE WITH BT3000 AND BT3100 TABLE SAWS) Your new router mounting kit has been engineered and manufactured to Ryobi's high standard for dependability, ease of
More informationMiter Fold Dado Set Instructions
Miter Fold Dado Set Instructions Effective April 2017 THIS PRODUCT IS INTENDED FOR EXPERIENCED WOODWORKERS ONLY; review full manual instructions prior to use for important safety information. Always check
More informationMODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
More informationHAND HELD SAW W MILL
HAND HELD SAW W MILL 92247 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All
More informationUniversal flat-panel mount
I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate
More information1 HP Dust Collector. Operator s Manual. Record the serial number and date of purchase in your manual for future reference.
Model: 60-100 1 HP Dust Collector Operator s Manual Record the serial number and date of purchase in your manual for future reference. Serial Number: Date of purchase: For technical support or parts questions,
More informationEllisSaw.com. EllisSaw.com P.O. Box Verona, WI
P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.
More informationPhone #: (360) Online Tech Support: Web:
Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz Your new Model D2058A Super-Heavy Duty Mobile Base () is designed to give you a stable and mobile platform upon
More informationINSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER
INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated
More informationFORD MOUNT INSTALLATION INSTRUCTIONS
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64289 June 1, 2003 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco (4X4 only) F-150 (4X4 only), F-250/350 Super Duty 1980 1991 Model No.
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationMODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION
MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION 1 SAVE THIS MANUAL You will need the manual for the safety warning and precautions, assembly instructions, operating
More informationCore EZ. Operating Manual. Toll Free B East Broadway Avenue Tampa, FL 33619
Operating Manual 3702 West Central Avenue Santa Ana, CA 92704 Toll Free 1-866-987-7297 11 High Street Suffield, CT 06078 www.ussaws.com 8004B East Broadway Avenue Tampa, FL 33619 Introduction This manual
More informationC a r r i a g e A s s e m b l y R e p l a c e m e n t
E1 TF-CR C a r r i a g e A s s e m b l y R e p l a c e m e n t October 2007 Software Version 5.0 and higher IMPORTANT! TigerStop must be enabled with a code that must be obtained from TigerStop Customer
More informationJigsaw Kit. Operating and Safety Instructions AJA300
Jigsaw Kit AJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation of this
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationMI MI OPERATING MANUAL
MODEL NO.: MI-76100 MI-76150 OPERATING MANUAL RULES for SAFE OPERATION MAGNUM INDUSTRIAL MI-76100 and MI 76150 DRILL PRESSES To help ensure safe operation, please take a moment to learn the how to operate
More informationModel ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT
ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT Model 46086 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to
More information8-Ton Manual Splitter OWNER S MANUAL
8-Ton Manual Splitter OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information12 SHEAR, PRESS BRAKE &SLIPROLL
12 SHEAR, PRESS BRAKE &SLIPROLL OPERATION MANUAL SPECIFICATION Cpacity: Roller : Die set sizes: Weight: 1mm thick (20gauge), 305 mm (12 ) width 38mm(1-1/2 ) 101.6mm(4 ), 76.2mm(3 ), 50.8mm (x2)[2 9x2]],
More information3HP BAG CYCLONE DUST COLLECTOR MANUAL
3HP BAG CYCLONE DUST COLLECTOR MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered
More informationLumber Smith. Owners Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Owners Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 General Safety Instructions Failure to follow these
More informationVARIABLE SPEED BECH LATHE
VARIABLE SPEED BECH LATHE Instruction Manual Please read this instruction manual thoroughly and follow all directions carefully. 1 Important Safety Instructions READ ALL INSTRUCTIONS AND WATNINGS BEFORE
More informationWall Mount Assembly and Mounting Guide (55 /84 )
Microsoft Surface Hub Wall Mount Assembly and Mounting Guide (55 /84 ) For mounting on a wall with wood studs These instructions assume wood-stud wall construction with 2-by-4 studs spaced 16 inches apart,
More informationABM International, Inc.
ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket
More informationGared Pro-S Portable Backstop
Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION
More informationTorqueMaster Replacement Spring
TorqueMaster Replacement Spring Installation Instructions NOTE: Use these installation instructions in conjunction with the TorqueMaster Repair / Replacement Spring Program literature. Copyright 999 Wayne-Dalton
More informationGENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationWISHING WELL LIGHT WOOD
WISHING WELL LIGHT WOOD 43362 ASSEMBLY AND OPERATING INSTRUCTIONS REVISED MANUAL 03e, 09k Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do
More informationBLADE COVER SYSTEM ONLY - TABLE SAW & DUST COLLECTOR SOLD SEPARATELY
The over arm blade cover system with dust collection capability is designed for more efficient dust collection, sawdust is immediately removed and will not accumulate on the table top. BLADE COVER SYSTEM
More informationThank you for purchasing out product! *Please read these instructions and follow them step by step. *
Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside
More informationOB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
More informationThe DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.
The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw
More information1300-lb Furniture and Crate Movers
1300-lb Furniture and Crate Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationEasy Woodturning. "It's Our Turn!" Made In America
Easy Woodturning owner S MANUAL "It's Our Turn!" Made In America Just like every product we have ever made, your Easy Chuck is 100% designed and manufactured in America by Easy Wood Tools. The Easy Chuck
More informationCOMPLEX GRINDER OF MILL& DRILL
COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk
More informationEMB MANUFACTURING INC.
TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationC a r r i a g e A s s e m b l y R e p l a c e m e n t
E1 TF-CR C a r r i a g e A s s e m b l y R e p l a c e m e n t October 2007 Software Version 5.0 and higher IMPORTANT! TigerStop must be enabled with a code that must be obtained from TigerStop Customer
More informationWestern Products, PO Box , Milwaukee, WI MOUNT KIT. Model No Ford F-150 4X
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com November 1, 2009 Lit. No. 64461, Rev. 05 64500 MOUNT KIT Model No. 3239 Ford F-150 4X4 2004-08 Installation Instructions Read
More informationQLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
More informationJEEP JK ( 5 DOOR ) SLIMLINE II - FULL TRAY EXTREME RACK KIT
JEEP JK ( 5 DOOR ) SLIMLINE II - FULL TRAY EXTREME RACK KIT FAJK001 / KRJW014T INSTALL TIME: 2.5 Hours NOTE: Your Jeep JK (5 Door) Extreme Roof Rack Kit consists of four boxes. (1) the Tray, (2) the Roll
More informationDual Arm Tilt LCD Mount
Installation Manual model # 51324 M o u n t i n g S y s t e m s Dual Arm Tilt LCD Mount Fits Displays 13 to 32 Supports Up to 50 lbs (23 kgs) Projection from Wall from 3 to 17 Meets VESA Standards 50/75/100,
More informationWARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit
REVISION 04 November, 20 2018 Ranger XP Door Kit Prior to installation, please verify if a revised version of this instruction sheet is available on Knowledge Center. The following symbols may be used
More informationInstructions for Stone Cutting Machine
Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h
More informationInstallation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine
Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe mounting of MP90 equipment on the anesthesia machine. WARNING: USE OF MOUNTING
More informationMOUNT KIT. Dodge Ram 2500/3500 (All) Dodge Ram 2500/3500 (Gasoline only) Installation Instructions CAUTION
November 15, 2014 Lit. No. 41376, Rev. 05 33884 MOUNT KIT Dodge Ram 2500/3500 (All) 2010-12 Dodge Ram 2500/3500 (Gasoline only) 2013 - Installation Instructions Read this document before installing the
More informationBlizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT. Dodge Ram 2500/3500. Installation Instructions CAUTION
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com November 1, 2011 Lit. No. 41415, Rev. 01 33885 UNDERCARRIAGE KIT Dodge Ram 2500/3500 2010 - Installation Instructions Read this document
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. (UK: 0800 056 2853) We re ready to help! CAUTION: IMPORTANT SAFETY INSTRUCTIONS
More informationA59 APD & A86 CPD 5'X 16' SW ALUMINUM PORTA-DOCK
Page 1 of 5 PORTA-DOCK, INC. A59 APD & A86 CPD 5'X 16' SW ALUMINUM PORTA-DOCK *For Beige Decking Add the Letter B to model* Thank you for purchasing our product! *Please read these instructions and follow
More informationARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO
ATTENTION If any components of this unit are broken or the unit does not operate properly, please contact Cabela s Customer Service. Retail Store Purchases: 1-800-905-2731 (U.S. & Canada) Catalog and Internet
More informationHANDHOLE SEAT GRINDER
1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
More informationOwner's Manual. Contents of Box. (Fits RT400/450/500 Routertops) Tools Required. Symbols
Contents of Box Owner's Manual model number CB400u (Fits RT400/450/500 Routertops) This upgraded cabinet base is designed for use with Model RT400, 450, and 500 routertops. This cabinet uses Euro hinges,
More informationHip Roof Canopy Instructions
Hip Roof Canopy Instructions - PUT SAFETY FIRST. NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS MANUAL MAY RESULT IN PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.. Before attempting
More information1/4in. SHEET PALM SANDER
1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor
More information8 x 10 GREENHOUSE. Visit our website at:
8 x 10 GREENHOUSE With Two Vents 9390 Assembly Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
More informationYes 20 Charging Wall Cabinet for Tablets
Built with Anthro-DNA Owner's Manual for Yes 20 Charging Wall Cabinet for Tablets Part # YESCABGMPW Components at a Glance 1 2 4 5 8 7 10 3 6 9 Front of Cabinet (closed) 1. Locking front door to User area.
More informationCOMBINATION SLOT HEAD FIXTURE
COMBINATION SLOT HEAD FIXTURE This Combination slot head fixture is all you need in one tool! Its dual-sided, self centering design takes the guesswork out of headstocks alignment! No measuring required
More informationMODEL 7000 BEVEL-MILL
MODEL 7000 BEVEL-MILL HECK INDUSTRIES P.O. BOX 425 HARTLAND, MI 48353 TOLL FREE: 800-886-5418 PHONE: 810-632-5400 FAX: 810-632-6640 WWW.HECKIND.NET INSTRUCTION MANUAL Save This Manual You will need the
More informationOPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
More informationCABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS
Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch
More informationJUDGE'S STAND INST TOOLS: Hammer, Tape Measure, Phillips Screwdriver, 7/16" Wrench, 1/2" Wrench, 9/16" Wrench X2
888--8. Check all parts against parts list to ensure that all parts and hardware are available to complete the installation. 0 0 900 JUDGE'S STAND TOOLS: Hammer, Tape Measure, Phillips Screwdriver, /"
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More information18 PIECE HOLE SAW SET
18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information2-in-1 AIR TANK AND BEAD BLASTER OWNER S MANUAL
2-in-1 AIR TANK AND BEAD BLASTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More information