PD 3 POD PRODUCT CATALOGUE. Load Transfer and Floor Joint Systems. New Zealand. July 2016 Issue. DIAMOND DOWEL PD3 DOWEL CRADLE

Transcription

1 New Zealand. July 2016 Issue. DD DIAMOND DOWEL PD 3 PD3 DOWEL CRADLE Load Transfer and Floor Joint Systems PRODUCT CATALOGUE KJ KEY JOINT sales@ramsetreid.co.nz 0508 DANLEY ( ) POD PODRAIL Load Transfer and Deflection Control Systems for Construction and Contraction Joints in Concrete Floor Slabs, Footpaths and Driveways. Pod and Reinforcing Spacing Solutions for Residential Flooring applications.

2 Overview ramsetreid specialises in the manufacture and supply of innovative products and solutions for the concrete construction industry. Our Danley product range was specifically developed to solve problems faced by the industry in the design and construction of concrete slabs-on-ground. The range overcomes many common challenges in the design and construction of durable, maintenance-free and safe concrete flatwork. Joint Failure and random cracking of Industrial concrete floors are the two most frequent sources of complaint from asset owners. A properly designed concrete slab that will perform well under traffic must include products that provide proper load transfer and joint protection. Our products and systems are designed for these vital functions providing durable floors with spall free joints and greatly reduced random cracking. Danley also offers a complete range of pod and reinforcing mesh spacers required for fast and efficient construction of residential slabs of uniformed quality and concrete cover.

3 Diamond Dowel Load Transfer Systems Diamond Dowels are a plate dowel and sleeve system designed for construction joint applications in concrete slabs and pavements. Diamond Dowels are designed as a fast fix system that provides load transfer across the joint and minimises differential deflection between adjacent slab panels. Diamond Dowels provide a low cost in place solution by eliminating the need for the drilling or processing of formwork that is required with traditional round and square dowel systems. Diamond Dowels attach directly to wooden formboard or metal formwork plates and come pre-packaged with all components ready for installation. Standard Finish: Black, galvanised or stainless steel dowels with a plastic sleeve. Simplifies form removal, can also be integrated into other formwork systems (e.g. ArmourMate ). Load Transfer Systems Features Standard Diamond Dowel plates are manufactured from steel to AS/NZS Grade 300. Maximises surface area at the joint. Nailing flange provides secure attachment to formboards. Double-headed nails help retain the sleeve in the concrete when stripping the formboards. Sleeve provides expansion capacity of 5 mm. Sleeve system ensures the dowel is perpendicular to the formboard and is stable. Sleeves moulded from durable, non-compressible plastic. Advantages Eliminates any drilling or processing of formwork. Allows for diagonal shrinkage movement in two directions in the horizontal plane. Reduces risk of restraint. Reduced likelihood of sleeve knock-off when placing steel reinforcement mesh. Maximises surface area of the joint line. Concreter Benefits Speed and accuracy of dowel placement. Lowest placement cost. Ensures the flattest floors at the joint. Nails retain sleeve during formwork removal. Greater stakeholder satisfaction. Engineering Benefits Allows for perpendicular and parallel differential shrinkage. Diamond shape reduces risk of restraint. Limits slab deflection ACI360R-10. Sleeve provides expansion. Sleeve ensures the plate dowel is held perpendicular to the joint. Asset Protection Benefits Reduces floor maintenance and downtime costs over the life-cycle of the facility. Reduces wear and tear on tenants materials handling equipment. Provides a smoother floor surface at the joints which ensures tenant efficiency. Increase tenant satisfaction and return on investment. DDSLPL06X110B Diamond Dowel 06mm x 110mm - Black 25 $6.00 Each M100 DDSLPL06X110G Diamond Dowel 06mm x 110mm - Galv 25 $7.10 Each M100 DDSLPL10X110B Diamond Dowel 10mm x 110mm - Black 15 $7.90 Each M100 DDSLPL10X110G Diamond Dowel 10mm x 110mm - Galv 15 $10.00 Each M100 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 3 )

4 PD 3 Dowel Cradle Load Transfer Systems The patented PD³ design features a tapered and sleeveless plate dowel that provides the world s best performance in limiting joint deflection to provide superior joint stability. The PD³ Dowel Cradle provides the highest deflection control tolerance in line with ACI Standards recommendations to limit joint spalling, facilitate load transfer and provide the lowest risk of restraint to ensure the best serviceability outcome for the slab design. The use of the PD³ system extends the life-cycle of the floor to provide the highest level of floor efficiency for tenants and the highest return on investment for the asset owner. PD³ Dowel Cradles are designed to provide a total contraction tion joint system solution by incorporating two systems in the one solution. The tapered PD³ dowels that allow for lateral movement eliminating the need for a plastic dowel sleeve and the wire cage that acts as a chair and spacer to ensure the dowels are aligned and maintained at the correct height and spacing during the pouring of the slab. The elimination of the plastic sleeve from the dowel ensures direct concrete to steel contact which provides the best possible control of load deflection by eliminating the crush factor of the plastic and providing a tighter control tolerance than other sleeved plate dowel systems. PD³ Dowel Cradles superior engineered performance controls floor flatness limiting joint spalling. Features The PD³ Dowel Cradle features a plate dowel with bond breaker allowing concrete to steel contact The PD³ Dowel Cradle utilises a tapered plate dowel that allows lateral movement without the use of a plastic sleeve The wire cradle construction ensures the accurate placement and alignment of the plate dowels at the correct centres and height within the slab Advantages No plastic sleeves required. Direct steel contact allows superior load deflection control Engineered to meet Super Flat Floor (SFF) requirements, ACI360R-10 The use of the PD³ Dowel Cradle creates a lateral and longitudinal movement void Reduces the risk of restraint Provides fast and accurate horizontal and vertical placement Concreter Benefits Speed and accuracy of dowel placement. Lowest placement cost Ensures the flattest floors at the joint Pour through capability Greater stakeholder satisfaction Engineering Benefits Provides highest performance in controlling joint deflection Compliance with ACI360R-10, design recommendations. Delivers flatter joints, FF and FL, ACI 117 Accuracy of dowel placement ensures the most effective load transfer performance Asset Protection Benefits Reduces the risk of spalling damage to the concrete at the joints. Reduces floor maintenance and downtime costs over the life-cycle of the facility. Reduces wear and tear on tenants materials handling equipment. Provides a smoother floor surface at the joints which ensures tenant efficiency. Increases tenant satisfaction and return on investment ( 4 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

5 PD 3 Dowel Cradle Load Transfer Systems Lateral Movement Of Dowels (Plan View) - How PD³ Dowels provide lateral and longitudinal shrinkage ACI360R-10 States (Chapter Load Transfer Mechanisms) Joint and crack stability measurements below 0.25 mm for joints or cracks subjected to lift truck traffic with small hard wheels will have good service life Panels shrink diagonally from corners. If the left side panel shrinks more than the right side panel differential shrinkage needs to be accommodated Joint opens up due to slab shrinkage As the panels shrink, a small void is formed in the concrete by the tapered dowel, allowing for differential parallel shrinkage Tapered PD³ Dowel (dowel orientation alternates) PD3 Brochure PD BLK PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $61.00 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $73.10 Each M200 PD B PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $62.30 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $73.10 Each M200 PD B PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $62.30 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $73.10 Each M200 PD B PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $71.90 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $88.30 Each M200 PD B PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $71.90 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $88.30 Each M200 PD B PD3 Cradle 450 centres to suit mm Slab - Black Dowels 25 $71.90 Each M200 PD G PD3 Cradle 450 centres to suit mm Slab - Galv Dowels 25 $88.30 Each M200 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 5 )

6 Made-to-Order Project Products Dowel Cradles Dowel Cradles are designed to provide a total joint system solution by incorporating two systems in one. The dowels and sleeves provide load transfer, whilst the wire cage (or cradle) acts as a bar chair and spacer. The wire cage ensures that the dowels are maintained at the correct height and spacing during the pouring of the slab. Dowel Cradles are available in standard off the shelf sizes, or to customer specifications on a made-to-order basis. Dowel Cradles are designed for efficiently limiting deflection in contraction joints in concrete slabs and pavements. Slab Deflection Dowel Cradles allow for the lateral and longitudinal movement of the dowel while preventing slab deflection at the joint. This greatly reduces the risk of damage to the joint edges, prolonging the lifecycle of the slab. Hyper ArmourMate Hyper ArmourMate is a premium armour edging solution and is designed for applications where the concrete edge and wear surface must withstand materials handling traffic with small hard wheels carrying high-loads on a daily basis, in particular, semiautomated and automated materials handling environments. The Hyper ArmourMate system is manufactured from high-quality Cold Drawn Steel rails to provide superior impact protection and is recommended for use when the floor requires the highest level of protection performance over the longest possible life-cycle. Hyper ArmourMate systems are designed in two configurations: the Top Rail System and the Full Joint System. Hyper ArmourMate Full Joint system provides the total joint solution by incorporating the cast in steel top rail edge protection system, the Diamond Dowel which provides both control over differential deflection and load transfer across the joint, with the galvanised sacrificial formwork plate which takes the place of the traditional form board. Hyper ArmourMate is available in a number of slab height configurations with the primary A Grade systems typically available off the shelf for immediate delivery. Custom or non-standard configurations are also available on a made-to-order basis. Range Options Top Rail or Full Joint System configurations Black or hot-dip galvanized steel to AS/NZS 4680 or stainless steel options available by request 6 mm or 10 mm Diamond Dowel Infill lengths available on request Intersections available on request Standard systems or custom configurations also available Hyper ArmourMate Brochure ( 6 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

7 Plate 60 ArmourMate Plate 60 ArmourMate is designed to be installed at the construction joints in Post Tension (PT) slab applications or where large shrinkage joints are expected to occur. The plate which bridges the gap provides a smooth transition for traffic travelling over the joint, minimising wheel damage and impact. Plate 60 ArmourMate allows for up to 60mm expansion in the joints and is designed for applications where the wear surface must withstand materials handling traffic with small hard wheels carrying high-loads on a daily basis, in particular semi-automated and automated materials handling environments. Plate 60 ArmourMate systems are designed to provide the total joint system solution by incorporating 3 systems in the one solution: Plate 60 ArmourMate steel angles and plates provide armour edging, the Square Dowels and Flanged Dowel Boxes provide for load transfer and the sacrificial galvanised formwork plate takes the place of traditional wooden form board. Plate 60 ArmourMate is available on a made-to-order basis. Range Options Full Joint System configurations Black or hot-dip galvanized steel to AS/NZS 4680 Multiple dowel options Infill lengths available on request Intersections available on request Made to order, or Custom configurations available Post Tension (PT) configuration available Insert Plate ArmourMate Insert Plate ArmourMate systems are designed to provide the total joint system solution by incorporating three systems in the one solution: the Insert Plate ArmourMate steel angles and plate provide armour edging, the Square Dowel and Flanged Dowel Box provide load transfer, and the sacrificial galvanised separation formwork plate which takes place of the traditional wooden form board. Insert Plate ArmourMate is made to customer specification and is designed to be used in situations where larger shrinkage and thermal movement is expected. It allows for future expansion with each replacement plate used in the joint. The plate over the joint gap provides a smooth transition for traffic travelling over the joint, minimising wheel damage and impacts. Insert Plate ArmourMate replacement plates are available to customer specification. The standard 65mm plates are designed to open to a gap of 15mm. If the gaps required need to be larger or smaller, replacement plates can be ordered to suit. Range Options Full Joint System configurations Black or hot-dip galvanized steel to AS/NZS 4680 Multiple dowel options Infill lengths available on request Made to order, or custom configurations available Removable cover plate Plate 60 ArmourMate Brochure Insert Plate ArmourMate Brochure sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 7 )

8 Friction Cut Dowels Load Transfer Systems Round & Square Dowels Round Dowel Available in 16 mm, 20 mm and 24 mm standard dowel sizes Available in 400 mm and 500 mm standard lengths Custom lengths available upon request Dowels made from AS/NZS , Grade 300 steel Available in galvanised steel as standard Friction cut dowels, not cropped Square Dowels Available in 16 mm and 20 mm standard dowel sizes Available in 400 mm and 500 mm standard lengths Custom lengths available upon request Dowels made from AS/NZS , Grade 300 steel Available in galvanised steel as standard Friction cut dowels, not cropped Ideal for use as started dowels drilled and epoxied into existing slabs Shrink Wrapped Dowels Shrink-wrapped structural grade round dowels friction cut to length, not cropped, with a plastic shrink-wrap coating for over half the length of the dowel The shrink-wrap bags provide bond breaking between the dowel and concrete without the need for greasing dowels. They are available in a variety of standard sizes upon request DWLRN16X400G Dowel Round 16mm x 400mm - Galv 1 $5.10 Each M300 DWLRN16X500G Dowel Round 16mm x 500mm - Galv 1 $5.90 Each M300 DWLRN20X400G Dowel Round 20mm x 400mm - Galv 1 $7.20 Each M300 DWLRN20X500G Dowel Round 20mm x 500mm - Galv 1 $8.00 Each M300 DWLRN24X450G Dowel Round 24mm x 450mm - Galv 1 $11.10 Each M300 DWLSQ16X400G Dowel Square 16mm x 400mm - Galv 1 $5.60 Each M300 DWLSQ20X400G Dowel Square 20mm x 400mm - Galv 1 $8.40 Each M300 DWLSQ20X500G Dowel Square 20mm x 500mm - Galv 1 $10.20 Each M300 Load Transfer Systems ( 8 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

9 Dowel Sleeves Load Transfer Systems Dowelmaster Dowelmaster sleeves are multi-directional plastic sleeves suitable for high capacity square dowels. They allow for contraction at the joint, as well as having a small amount of lateral movement and expansion capacity. They are ideal for construction joints in ground slabs and are available in 16 mm and 20 mm standard sizes. The 16mm and 20mm Dowelmaster sleeves are fastened to wooden form boards (using the optional nailing plate) or attach directly to Danley Keyjoint. The sleeves are supported at the rear by a stake and wedge system eliminating the need for bar chairs. Dowelmaster Speed Sleeve Round 16, 20 & 24 Dowels Speed Sleeves are used with round dowels to eliminate the need for drilling formwork and greasing Dowels. Approved by engineers, Speed Sleeve minimises vertical movement at joints, reduces damage and is quick and easy to use. Suitable for Black, Galvanised or Stainless Steel Dowels. Speed Sleeve DWLSPDSLV16X240 Dowel Speed Sleeve 16mm x 240mm 100 $1.80 Each M400 DWLSPDSLV16X310 Dowel Speed Sleeve 16mm x 310mm 100 $1.90 Each M400 DWLSPDSLV20X240 Dowel Speed Sleeve 20mm x 240mm 100 $1.90 Each M400 DWLSPDSLV20X310 Dowel Speed Sleeve 20mm x 310mm 100 $2.20 Each M400 DWLSPDSLV24X240 Dowel Speed Sleeve 24mm x 240mm 100 $2.50 Each M400 DWLSPDSLVNAIL16 Dowel Speed Sleeve Nailing Plate 16mm - Green 100 $0.90 Each M400 DWLSPDSLVNAIL20 Dowel Speed Sleeve Nailing Plate 20mm - Red 100 $0.90 Each M400 DWLSPDSLVNAIL24 Dowel Speed Sleeve Nailing Plate 24mm - Brown 100 $1.30 Each M400 DWLSQMAS16X210 DowelMaster Square - 16mm x mm with Stake - White 100 $2.30 Each M400 DWLSQMAS20X260 DowelMaster Square- 20mm x mm with Stake - Yellow 100 $2.60 Each M400 DWLSQMASNL16 DowelMaster Square - Nailing Plate 16mm - White 100 $1.10 Each M400 DWLSQMASNL20 DowelMaster Square - Nailing Plate 20mm - Yellow 100 $1.10 Each M400 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 9 )

10 Crack-A-Joint Crack Control As an alternative to saw cutting, place Crack-A-Joint into the wet concrete along the joint line (above the centre of the dowel cradle), to induce a crack for the full depth of the concrete. Crack-A-Joint is available in standard 3m lengths formed from galvanised sheet steel to a height of 25mm. It can be supplied as a plain joint or with a permanent Rip-A-Strip capping in two different colours options (Black and Grey). Initiates a contraction joint in a slab.b Features Immediately initiates a contraction joint in the slab, when positioned in wet concrete. Finish the slab on the same day; no need to return the next day to saw cut Crack-A-Joint will butt up to any given edge, even columns Crack-A-Joint can be placed precisely During installation, Crack-A-Joint remains rigid Clean and quick; Crack-A-Joint gives the building industry a positive alternative to existing methods Available with Rip-A-Strip capping that is UV stabilised and available in 2 colours; grey or black Crack-A-Joint can be setup on stakes to provide a pour through joint. No fill required; the steel edge on Crack-A-Joint acts as a support for the edge of the concrete and stops unsightly fraying and chipping Crack-A-Joint is roll formed from a pregalvanised strip Available in 25mm size only Supplied in standard 3m lengths Crack-A-Joint Brochure CJP25MM3M Crack-A-Joint Plain 25mm x 3mtr 25 $8.80 Each M500 CJR25MM3MBLA Crack-A-Joint with Rip-A-Strip 25mm x 3mtr - Black 10 $15.60 Each M500 CJR25MM3MGRE Crack-A-Joint with Rip-A-Strip 25mm x 3mtr - Grey 10 $15.50 Each M500 ( 10 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

11 Keyjoint Crack Control The Keyjoint System facilitates greater r control of joints in concrete slabs enabling loads to be transferred between adjoining slabs while allowing lateral movement and limiting differential vertical deflection. Facilitates greater control of joints in concrete. Features Patented, multi-function galvanised steel stay-in-place formwork system for concrete slabs Allows lateral movement between the slabs, but limits vertical differential vertical deflection between the slabs Tighter key taper, giving less differential vertical deflection than competitive products Rigid Top Edge Allows continuous concrete placement with preformed internal joints Incorporates unique drive-n-twist stake system to make installation simple Provides a more uniform joint line at a fraction of the cost of conventional formwork Knock-outs provide for placement of square dowels (round dowels can also be used if specified) Available in 3m lengths to suit four slab thicknesses (other lengths available on request) Ideal for light traffic areas Companion capping available for 3mm recess, 10mm recess, or permanent capping with Rip-A-Strip in 2 different colours Truly a system that saves time and money Available as expandable foam Concrete Slab Joint Dynamics Differential deflection between slabs Fatigue between joints Concrete failure at joints Damage to equipment traversing joints Remedial repair High repair costs Most efficient product Minimal differential deflection Minimise concrete failure at joints Reduced damage to equipment Less frequent repairs Value for money Danley Keyjoint KJ100X3M4STK Key Joint 100mm x 3m with 4 x 350mm Stakes 50 $29.50 Each M500 KJ125X3M4STK Key Joint 125mm x 3m with 4 x 350mm Stakes 50 $31.00 Each M500 KJ150X3M4STK Key Joint 150mm x 3m with 4 x 350mm Stakes 50 $34.00 Each M500 KJ200X3M4STK Key Joint 200mm x 3m with 4 x 450mm Stakes 50 $40.00 Each M500 KJEXP100X3.0M05 Key Joint Expanda 100mm x 3mtr with 4 Stakes - Foam 5mm 50 $71.70 Each M500 KJEXP125X3.0M05 Key Joint Expanda 125mm x 3mtr with 4 Stakes - Foam 5mm 50 $73.20 Each M500 KJEXP150X3.0M05 Key Joint Expanda 150mm x 3mtr with 4 Stakes - Foam 5mm 50 $78.40 Each M500 KJEXP200X3.0M05 Key Joint Expanda 200mm x 3mtr with 4 Stakes - Foam 5mm 50 $85.20 Each M500 KJCRIP13X025BLA Key Joint Capping - 13mm Rip A Strip (25mtr roll) - Black 8 $96.60 Roll M500 KJCRIP13X025GRE Key Joint Capping - 13mm Rip A Strip (25mtr roll) - Grey 8 $96.60 Roll M500 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 11 )

12 PodRail The Danley PodRail provides support for mesh in typical residential foam pod slabs and cannot be matched by any other type of spacer. Its unique flatness gives it the ability to resist sinking into pods always providing the designed cover to mesh with only two units per pod. Fast and easy to install, it saves time and backs! Key Product Features Anchoring Spikes: Built in anchoring spikes allow the rail to anchor into the foam pods preventing movement when placing mesh. Advantages: Offset wings on base for excellent stability Wide flat top for ease of installation Flat face profile eliminates air voids Speed of use. Faster layout. Less physical stress on installers Strong spike for tightly held positioning Smooth flat top for ease of mesh placement Broad feet for eliminates chair punch through Higher integrity slab Flat Design: The I-Beam profile shape of the PodRail ensures flatness along both the top and bottom of the rail and resists bowing. The PodRail sits flat and provides uniform cover. Large Aperture Design: The design of the PodRail facilitates continuous, uninterrupted and consistent concrete coverage. The large flat 22 mm apertures help prevent air pockets in the concrete floor slab. Benefits: Concreter Benefits: Easy to use Faster installation than traditional bar chairs Reduced worker fatigue Builder Benefits: More uniform mesh placement means higher integrity slab Faster install for improved productivity on site Engineer/Surveyor Benefits: Meets requirements of ASNZS2425:2015 ASNZ2425:2015 Load Rating (kgs) BPODR40S PodRail 40mm with Spikes 20 $ P The Danley PodRail complies with ASNZS2425:2015. Quality ISO 9001 ( 12 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

13 Residential Installation Guide: Step 1: PodRails should be installed following the placement of the foam pods. The anchoring spikes are to be pressed into the foam pod until the base of the rail contacts the foam surface. Please allow at least two PodRails per 1100 mm x 1100 mm foam pod. Step 1 Step 2: Place PodRails approximately mm from the edge of the pod and at 45 degrees and in a centralised manner to provide a maximum of 700 mm spread between rails. Rails can be used across pods as well if required to help maintain beam spacing. Step 2 Step 3: Place mesh on top of the PodRails. When the spikes are anchored into the foam pod, the flat top design of the PodRail allows the mesh to be easily placed in the correct position without restriction or displacement of the PodRails. Step 3 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 13 )

14 Combination Bar Chairs Combination Bar Chairs: Are used to set the reinforcing bar and mesh to the correct position within the concrete cover. Ideal for use in applications including polystyrene pod slabs, slab-on-ground and swimming pools. The Danley range of Plastic Combination Bar Chairs are available in a range of standard sizes including 25mm & 40mm, 50mm & 65mm, 75mm & 90mm and 80mm & 100mm cover. Also available in sizes to suit deeper slabs requiring up to 165mm/170mm of cover. Clip-On Combination Bar Chair: The easy to use clip-on mechanism ensures correct mesh placement is maintained when the crew is either walking on the mesh, or when the mesh is being repositioned or moved. SOG Plastic Bar Chairs: The Danley SOG (Slab-On-Ground) Bar Chairs are used to set the reinforcing bar and mesh to the correct position in deep slab residential, commercial and civil applications including roadways. The easy to use Clip-On feature on the Danley range of SOG Bar Chairs ensures the chair remains in place on the mesh and suits reinforcing bar up 20 mm in diameter. The SOG chairs are available in sizes which provide 100 mm, 110 mm, 120 mm, 130 mm, 140 mm and 150 mm cover. ASNZ2425:2015 Load Rating (kgs) BC2540 Combination Bar Chair 25/40mm 100 $ P BC5065C Combination Bar Chair 50/65mm Clip On 100 $ P BC7590 Combination Bar Chair 75/90mm 100 $ P BC85100 Combination Bar Chair 85/100mm 100 $ P BCSOG5065C Bar Chair SOG Clip-On 50/ $ P BSOG100C SOG Chair 100mm Clip-On 100 $ P BSOG110C SOG Chair 110mm Clip-On 100 $ P BSOG120C SOG Chair 120mm Clip-On 100 $ P BSOG130C SOG Chair 130mm Clip-On 100 $ P BSOG140C SOG Chair 140mm Clip-On 100 $ P BSOG150C SOG Chair 150mm Clip-On 100 $ P Quality ISO 9001 The Danley range of plastic chairing solutions for Industrial and Residential Slab-on-Ground construction comply with ASNZS2425:2015. ( 14 ) sales@ramsetreid.co.nz 0508 DANLEY ( )

15 Construction Safety Products Danley BarGuard The Danley BarGuard reduces the chance of cuts and abrasions from exposed reinforcing bars up to 36 mm in diameter. They are also able to fit over star pickets and most stakes on safety barriers. BarGuard is designed with unique internal fins which ensures sufficient engagement on either star pickets or reinforcing bar. The internal fins prevent the BarGuard from being easily dislodged when installed throughout the construction site. However they are not designed for high load vertical impacts, such as someone falling from a height. Danley LifeGuard The unique Danley LifeGuard Impalement Prevention Caps guard against reinforcing bars, and are ideally suited to sites that require added safety from potential falls from a height. The LifeGuard is a quick fit cap with a large diameter encapsulated metal insert. It also features a centrally raised boss that ensures that the reinforcing bar is retained in the sleeve preventing breakout through the side of the sleeve. The Danley LifeGuard complies with the world s most stringent impalement protection specification and test regime: The California Occupational Health & Safety [Cal/OHSA] Regulations Section Danley ReoSok The Danley ReoSok is the simplest solution to providing protection from exposed or protruding reinforcing bars on-site. Providing both impalement protection and scratch resistance, the ReoSok caps are quick and easy to fit, economical and safe. Please note that the ReoSok is not designed for high load vertical impacts, such as someone falling from height unless used in unison with a N12 lacer bar LIFEGUARD12-20 Lifeguard - suits bars 12mm to 20mm - Yellow (Bag of 50) 50 $11.00 Each P300 LIFEGUARD24-36 Lifeguard - suits bars/pickets 24mm to 36mm - Orange (Bag of 50) 50 $12.50 Each P300 REOSOK12-20 Reosok - suits bars 12mm to 20mm - Yellow (Bag of 50) 50 $ P300 REOSOK24-36 Reosok - suits bars/pickets 24mm to 36mm - Orange (Bag of 50) 50 $ P300 BARGY100 Bar Guard Safety Cap Yellow $ P300 sales@ramsetreid.co.nz 0508 DANLEY ( ) ( 15 )

16 Who is ramsetreid? A Division of ITW Australia Pty Ltd, ramsetreid is the business that brings together the Ramset, Reid Danley, Modfix and Miska businesses across Australia and New Zealand. Firmly focused on customers in the Commercial Construction, Precast, Tilt- Up, Structural Steel and Flooring & Paving markets in Australia and New Zealand, we are a business with a proud heritage of serving the market through our core brands Ramset, Reid and Danley. We are a local company with an extensive manufacturing, engineering, distribution and R&D footprint across Australia and New Zealand. As a division of ITW, we have immediate acces to our sister companies globally. This allows us to develop or source the best product and service solutions for customers construction projects. sales@ramsetreid.co.nz 0508 DANLEY ramsetreid Poland Road, Glenfield, Auckland 0627 New Zealand In the interests of product improvement, ramsetreid reserves the right to alter product specifications as required. Information included in this product catalogue is correct at time of printing. It is the responsibility of the user to ensure product selected is appropriate for its intended use. For further technical information go to or contact ramsetreid on the numbers indicated. ITW Australia Pty. Ltd. ABN trading as ramsetreid Copyright 2016 Disclaimer: The information contained in this publication is intended to give a fair description of the products and their capabilities. No responsibility or liability by the manufacturers will be accepted for misuse, misreading or deviation from the recommended guidelines of these products. As new technology is introduced, or industry standards are altered, ramsetreid TM reserves the right to alter the information without notice.