Carpentry saw. Hammer Drill Bits. Chisels. Carpentry saw. Percussion Drill Bits. Replacement saw blade for carpentry saw.

Transcription

1 Infobox_Ausfuehrung_Ueberschrift Carpentry saw Replaceable saw blade Carpentry saw Two-components safety handle , ,46 14 teeth/inch suitable for general carpentry, plywood, treated material, PVC and ABS, hard wood, etc. 10 teeth/inch suitable for wooden beams, framing timber, treated material, standing timber, branches, etc. Hold handle lightly A pull cut does not require great force or Guide the saw and let it make the cut using its A cutting angle of under 10 Replacement saw blade for carpentry saw , ,96 Each 300 mm blades and 380 mm blades t in the same handle 114

2 rung_ueberschrift Infobox_Ausfueh- Fine cut saw Replaceable saw blade Fine cut saw Two-components safety handle ,20 Fine cuts, plywood thin PVC, hard wood, etc. Hold handle lightly A pull cut does not require great force or Guide the saw and let it make the cut using its A cutting angle of under 10 Well suitable for model making because it allows very ne and thin cuts Replacement saw blade for ne cut saw ,00 115

3 Infobox_Ausfuehrung_Ueberschrift NEO ne cut saw Replaceable saw blade Traditionally long bast wrapped handle 15 teeth/inch suitable for general ne cuts, plywood, furniture making, treated wood, etc. 12 teeth/inch suitable for general carpentry, plywood, treated material, PVC and ABS, hard wood, etc. Hold handle lightly A pull cut does not require great force or Guide the saw and let it make the cut using its A cutting angle of under 10 NEO ne cut saw , ,77 Replacement saw blade for ne cut saw , ,47 Replaceable saw blade Each 265 mm blades and 300 mm blades t in the same handle 116

4 rung_ueberschrift Infobox_Ausfueh- Fine cut saw with double edged blade Replaceable saw blade Fine cut saw with double edged blade Long handle ,22 For ush cuts, stair cases, plywood and general ne cuts Hold handle lightly A pull cut does not require great force or Guide the saw and let it make the cut using its A cutting angle of under 10 Replacement saw blade with double edge ,47 Well suitable for furniture works, door frames and stair cases 117

5 Infobox_Ausfuehrung_Ueberschrift Infobox_Ausfuehrung_Ueberschrift MICRO pull saw with metal blade Pruning saw Replaceable saw blade MICRO pull saw with metal blade Two-components handle ,98 Fine cuts in softwood and hard wood Replacement saw blade metal for cutting..., aluminium and mild steel Hold handle lightly A pull cut does not require great force or Guide the saw and let it make the cut using its A cutting angle of under 10 Replacement saw blade for micro pull saw Wood blade , Metal blade ,57 Suitable for handicrafts and ne cut With metal blade for light metal-structure Saw with folding blade Partially replacable saw blade Standing timber, branches, construction timber natural wood, ABS- and plastic tubes. Well suitable for gardening ECO model with a working length of 180 mm Pruning saw , ,54 Replacement saw blade for pruning saw , ,22 118

6 rung_ueberschrift Infobox_Ausfuehrung_Ueberschrift Infobox_Ausfueh- Large pruning saw Drywall saw With sheath and belt loop Large pruning saw ,54 Standing timber, branches, construction timber natural wood, ABS- and plastic tubes. Well suitable for gardening Drywall saw Ergonomically designed handle Extremely stiff and xed blade Thinned tip ,34 For plasterboard, brous plasterboard, gypsum, plywood, tree roots, etc. Well suitable for interior works 119

7 Technical information - PRECISION THE PULL CUT LITTLE FORCE REQUIRED Makes a thin saw blade possible Hold handle lightly Easy and safe start No bending, no unevenness Precise and controlled cut A pull cut does not require great force or Guide the saw and let it make the cut itself using its SPEED THIN SAW BLADE The thinner the blade, the faster the cut Made of high-quality carbon steel Thin and clean cuts Flush cut due to the exible blade CUTTING ANGLE LESS THEN 10 It is important that the cutting angle is less than 10º. HANDLING TEETH The triple edge teeth make cross and rip cutting possible Electronic pulse hardening provides up to 3 times longer tool life The teeth are ground individually using diamond RESULTS PRECISE WORK Extremely fast work Easy starting of cut Triple edge teeth Controlled cut Cross and rip cutting Smooth cut face LITTLE FORCE REQUIRED If the shark saw is used correctly, you will require only 20 % of the force to saw 5 times more than with conventional saws. Clamp the workpiece or provide a rm support with stop in the direction of the pull. Check the workpiece for obstructions (screws, nails, etc.). These may damage the saw permanently. Use the full length of the saw blade by pulling the saw uniformly through. Always t the protector over the teeth when nished. This ensures a long life of the shark saw. Store the saw safely away from children. Maintain a cutting angle of less than 10º. The weight of the saw starts the cut on its own. Slightly increase the pressure on the saw once a small groove has been cut. Always pull the saw briskly and without great application of force. 120