IMPERIAL BLADES ATTACHMENTS & BLADES IMPERIAL BLADES, INC. Replacements for:

Transcription

1 ATTACHMENTS & BLADES Replacements for: X, Chicago Multi Tool, Craftsman Multi Tool, Dremel Multi-Max, Fein Multimaster, Fein Supercut, Mastercraft, Milwaukee, Ridgid Jobmax, Rockwell Sonicrafter, Skil, Worx Sonicrafter, INC SYENE Road Madison WI, Phone: Fax:

2 Our SC series Our RW series Imperial Blades has 3 lines of oscillating blades. Universal Arbor Design The MM Series Our MM series features the Universal Arbor and will fit the -

3 FINE TOOTH Dremel Multi- WOOD BLADES 150 Plunge Depth: 1-5/8" or 2- TPI (Teeth Per Inch): 16 Material: High Carbon Steel Wood - Soft Plastic Width Width 2- Depth 2- Width The fine tooth configuration is specifically designed for precision wood applications. They can be used for cutting under the kick plate when installing new kitchen flooring, undercutting door jambs or flush cutting tongue-and-groove. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut.

4 COARSE TOOTH Dremel Multi WOOD BLADES Width Wood - Drywall - Plastic The coarse tooth saw blade has larger teeth for aggressive cutting. It is designed for cutting wood, drywall and other soft material. This blade will cut through a few nails but is mainly used for softer applications. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut. Plunge Depth: 1-5/8" TPI (Teeth Per Inch): 12 Material: High Carbon Steel

5 UNIVERSAL Material: High Speed Steel & Bi-Metal UNIVERSAL BLADES Multi , WORX Wood, Fiberglass, Sheet Metal, Drywall and Plastic 300 Bi-Metal 410 HSS Segmented 415 HSS 450 HSS Round The Universal Bi Metal saw blade is made with the industry's highest quality high speed steel material. Comes with a 14 teeth per inch blade to cut wood and nails with ease. The High-Speed Steel material is rigid, allowing the blade to cut through harder woods and sheet metal up to 1mm thick as well as carbon fiber, fiberglass, and nails.

6 STORM SERIES Material: Titanium & Bi-Metal T340 UNIVERSAL BLADES T340 Bi-Metal 1-3/4 Width Multi-, WORX T340 Wood, Fiberglass, PVC, Sheet Metal, Drywall and Plastic The new T340. Titanium coated, Bi-Metal 1-3/4 blade. This blade will change the way you use your oscillating tool! With 18 teeth per inch and a Titanium coated blade you can cut almost anything from wood to decking screws.

7 SCRAPERS Dremel Multi SCRAPER BLADES 500 Rigid Scraper 510 Flexible Scraper 520 Flat Scraper 530 Segmented Knife 540 Sealant Cutter 560 Tapered Sealant Cutter Rigid Scraper Blade, For removal of floor coverings and coatings, such as waterproofing, adhesive residue, etc. Flexible Scraper Blade. Mushroomshaped flexible scraper for cutting silicone and soft glazing compound as well as separation of insulated glass. Sealant Cutters. For the removal and cutting of caulk and sealants.,

8 CARBIDE Dremel Multi CARBIDE BLADES 610 Segmented 620 RASP Our standard carbide-tipped saw blades work great for cutting defective tile joints and milling cracks in plaster, porous concrete and similar building materials. Our blades are recessed and flush cut capable. Use the RASP for coarse grinding or rasping and aggressive material removal over larger areas. Works great on wood, hardened adhesives, thin set, and masonry. Material: Carbide

9 DIAMOND Dremel Multi DIAMOND BLADES 730 Segmented The diamond blade will remove tough grout from between tiled surfaces. Long-lasting blade enables continuous work on large projects. For commercial applications such as cutting out marble and trass concrete joints. Also for sinking ducts in plaster, brick, pumice and honeycomb stone These premium, long lasting blades are designed specifically for harder grouts. Material: Diamond

10 SANDPAPER 60 grit 80 grit SANDPAPER 120 grit 180 grit 220 grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit Sandpaper Available in 5 and 50 packs. 60 grit, 80 grit, 120 grit, 150 grit, 180 grit, 220 grit, and a 50 pc Variety Pack