Bookcase (5926) - Assembly and Operation Manual

Size: px

Start display at page:

Download "Bookcase (5926) - Assembly and Operation Manual"

Virgil Dean
5 years ago
Views:

1 Bookcase (5926) - Assembly and Operation Manual Congratulations on purchasing an MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only. Any institutional use is strictly prohibited. lease be sure to follow the instructions for proper assembly. Use a hillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. lease understand that natural woods have color variations which are the result of nature and not defects in workmanship. DO NOT UBTITUTE ART. ALL MODEL HAVE THE AME UANTITY OF ART AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUTRATED DUE TO TYLITIC VARIATION. IMORTANT: As with all infant and baby furniture, it is important to check fasteners, screws, and bolts periodically for tightness. arents should ensure a safe environment for their children by checking the furniture regularly before placing a child in the product. revised 26JAN2015 page 1

2 ART A. Top & bottom front panel (2) B. Top & bottom rear panel (2) C. Adjustable shelves (3) D. tationary shelves (2) F. Left panel G. Right panel K. Drawer Front E. Back panel I. Right drawer side J. Left drawer side L. Drawer Back M. Drawer Bottom N. Top panel page 2

HARDWARE O. Metal shelf peg (12). Cam lock bolt (22). 3/8 hillips head screw (46) T 1 1/4 hillips head screw (4) V. Left panel glide. Cam lock (22) U. 1 1/4 hillips head screw (2) R.

3 HARDWARE O. Metal shelf peg (12). Cam lock bolt (22). 3/8 hillips head screw (46) T 1 1/4 hillips head screw (4) V. Left panel glide. Cam lock (22) U. 1 1/4 hillips head screw (2) R. Drawer knob (2) Tools Needed (not included) X. Right drawer glide hillips screwdriver Y. Left drawer glide W. Right panel glide AEMBLY INTRUCTION 1 crew eight cam lock bolts () into the threaded inserts on each side panel (F) and (G). The side panels are labeled left and right for easy identiﬁcation. Use three hillips head screws () to attach the left (V) and right (W) panel glide. The glide wheel should face the front of the bookcase with the angled part to the top. F G V V W W page 3

4 2 Insert cam locks () and attach the top and bottom front panels (A), top and bottom rear panels (B) and the two stationary shelves (D) to the left side panel (F). Rotate the cam locks to secure the parts. Be sure that the cam locks on the front panels face to the inside of the bookcase. B B A A D F 3 Insert cam locks () in the top and bottom front panels (A), top and bottom rear panels (B) and the two stationary shelves (D). Align the right side panel D (G) over the assembly so that all of the dowels and cam lock bolts ﬁt into position. ush the panel ﬁrmly in place and rotate the cam locks to secure the panel. G B B D A D A page 4

5 4 N crew four cam lock bolts () into the threaded inserts in the top panel (N). Insert four cam locks () into the holes at the top of the case. Align the top panel over the dowels and push it into position. Tighten the cam locks to secure the top. N 5 Attach the back panel (E) to the case with thirty four hillips head screws (). 6 Insert the metal shelf pins into the holes at the desired height in the side panels and place the adjustable shelves (C) on top of them. O E page 5

6 7 7a DRAWER AEMBLY INTRUCTION crew two cam lock bolts () into the threaded inserts in the drawer front (K). Insert cam locks () into the drawer sides (I) and (J) then rotate the locks to secure the sides. J I 7b K lide the drawer bottom (M) into the grooves in the sides and front of the drawer. M page 6

7 7c osition the back panel (L) on the drawer assembly and secure it with four hillips head screws (T). T L T 7d Y 7e 8 Attach the left (Y) and right (X) drawer glides with three hillips head screws () each. Be sure the glide wheel is towards the back of the drawer. X Use the two hillips head screws (U) to attach the drawer knobs (R). Then slide the drawer into the case. U R page 7

8 9 FURNITURE ANTI-TIING KIT INTALLATION erious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap. WARNING X1 erious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: lace heaviest item in the lowest drawers. Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product. Never allow children to climb or hang on drawers, doors, or shelves. Never open more than one drawer at a time. (OR) Do not defeat or remove the drawer interlock system. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. This is permanent label. Do not attempt to remove! 9a Locate a 2 x 4 stud behind the wall, and make a mark. X1 X2 X1 Tools Needed (not included) tubby crewdriver 9b encil hillips screwdriver Install the strap on the wall with long screw and washer. 2 x 4 wall stud page 8

9 9c Install the other end of strap on the back of dresser with short screw and washer into the wood framing of the dresser. KEE THI MANUAL IN A AFE LACE FOR FUTURE REFERENCE. READ ALL INTRUCTION BEFORE UING THE RODUCT. KEE THE INTRUCTION FOR FUTURE UE. torage: ine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents. unlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately. Care and Cleaning: Do not scratch or chip the ﬁnish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a damp, soft rag. Rinse and dry thoroughly. If you ever reﬁnish this furniture, be sure to use only a non-toxic ﬁnish speciﬁed for children s products. If you choose to reﬁnish this furniture, the warranty will be voided. Registering your product is even easier than before. You can register your product on our website at : IF YOU WOULD LIKE TO ORDER RELACEMENT OR MIING LEAE VIIT U AT: OR YOU CAN CONTACT U BY MAIL: MDB FAMILY 855 WAHINGTON BLVD. MONTEBELLO, CA Finish page 9

Combo Dresser (5599) - Assembly and Operation Manual

Combo Dresser (5599) - Assembly and Operation Manual Congratulations on purchasing an MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly,