Addison Double Cot RECYCLED. Assembly and care instructions. Cot. Mattress and accessories not included. Double Bed - Optional Kit

Size: px

Start display at page:

Download "Addison Double Cot RECYCLED. Assembly and care instructions. Cot. Mattress and accessories not included. Double Bed - Optional Kit"

Shonda Warner
5 years ago
Views:

1 R Addison Double Cot Assembly and care instructions This cot can be assembled in a number of configurations Instructions for all configurations are included in this manual Cot Mattress and accessories not included Bassinet Double Bed - Optional Kit Optional double bed rails and base kit sold separately RECYCLED Packaging and instructions printed on recycled materials Save these instructions for future reference. Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people. SJC Brands Pty Ltd abn Merryvale Road, MINTO, NSW 2566 p.o. box 5878 MINTO DC, NSW 2566 t f e. customer.service@sjcbrands.com.au w.

Warnings Major components Safety Consideration for your Child. Follow the manufacturer s assembly instructions in detail to ensure the safety features of the cot are not compromised.

KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM ANY POSITION IN THE COT.

2 Warnings Major components Safety Consideration for your Child. Follow the manufacturer s assembly instructions in detail to ensure the safety features of the cot are not compromised. ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS. DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT. KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM ANY POSITION IN THE COT. It is advisable to keep all items out of your child s cot to prevent suffocation or strangulation. TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR CHILD CAN SIT UP. Side panels x 2 Cot Headboard x1 Cot End x1 Recommended Mattress Size. This cot has been manufactured for use with a mattress which measures 750 mm (wide) x 1310 mm (long) x 120 mm (maximum thickness). The width and mattress and the sides and ends of the cot do not exceed 40 mm. This is to minimise the risk of a child s limb becoming caught in the gap. The thickness greater than 500 mm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot. Safety Consideration for Cot. Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. Regularly check all of the connecting bolts, making sure they are tight. Regularly check cot for weakness in timber joints and timber panels. If any weaknesses are found, report immediately to Tasman Elegance via: Do not use cot if it has been damaged in any way and always use genuine Tasman Elegance parts. Contact your nearest Tasman Elegance stockist or original place of purchase for spare parts Report any fault with this furniture to Tasman Elegance immediately.see website for details. Bassinet Headboard x2 Bassinet Base x 1 Cot Base x 1 Assembly tips - hardware Wooden dowel pins Connector screws and lunar washers Gently push or tap dowel pins into place using your thumb or a small hammer. Note, excessive force may result in damage to the pin or furniture. Double bed kit (optional) Double bed bases x 2 Double Bed rails x 2 Screws Insert the lunar washer into the locating hole, with the curved face against the wall of the locating hole. Insert the connector screw into the washer and push it through until it engages with the thread of the insert on the panel you are attaching it to. Tighten the connector screw firmly but do not overtighten We recommend tightening all screws and connectors by hand. If using a cordless driver set the speed to a slow setting and the clutch to a low setting to prevent excessive tightening that may result in damage to your furniture. Recheck tightness Re-tighten all connector screws (at least two months after assembling the cot), as some connectors may loosen as the cot settles. Periodically check all of the connector screws, making sure they are tight. Small parts can present a choking hazard. Always keep small parts out of reach of children both during and after assembly. Store any spare or unused parts in a safe place. 2 3 Warning

3 Addison Cot - Assembly What you will need Optional cot only Parts List Cot Headboard End Side panels x 2 Cot Base x 1 Hardware List M6 x 15 Cap screw x 4 M6 x 70 Bolts x 8 M6 x 50 Bolts x 4 Metal lunar washers x 4 Allen key / phillips key x 1 each Warning Small parts can present a choking hazard. Always keep small parts out of reach of children both during and after assembly. Store any spare or unused parts in a safe place. We recommend tightening all screws and connectors by hand. If using a cordless driver, set the speed to a slow setting and the clutch to a low setting to prevent execessive tightening that may result in damage to your furniture. Recheck tightness Re-tighten all connector screws (at least two months after assembling the cot), as some connectors may loosen as the cot settles. Periodically check all of the connector screws, making sure they are tight.

4 Step 1 - Attach the side panels to the base M6 x 50 Bolts x 4 Lower Position Assembly 4 x lunar washers B Cap Screw M6x15x4 M6 x 15 Cap Screw x 4 A). Attach each side panel to the base. Note the base position needed for either cot or bassinet configurations To secure the base rails: Insert a lunar washer to the locating hole at each end of the base rails and then insert the connector screws and lightly hand tighten each connector screw. Do not fully tighten the screws at this time. A B).IMPORTANT SAFETY STEP Fit the small cap screws to the 4 remaining unused base locating holes (2 on each side). This is a required safety step to prevent the entry of small fingers into these holes. A B Cap Screw M6x15x4 Higher Position Assembly

5 Step 2 - Attach the Cot M6 x 70 Bolts x 4 Gently lower the base and side panel assembly onto the bed head panel. Align the connector holes on the side panels with the locating holes on the bed head. Insert the connector screws and lightly hand tighten the screws. Do not fully tighten the screws at this time. x4 Step 3 - Attach the Cot Headboard M6 x 70 Bolts x 4 Gently lower the bed end panel onto the cot assembly. Align the connector holes on the side panels with the locating holes on the bed end panel. Insert the connector screws and lightly hand tighten the screws. x4

6 Step 4 - Tighten all connector screws. To complete assembly. tighten all 12 connector screws: 4 on the base / side panels. 4 on the rear bed head, and 4 on the front bed head. Tighten the screws firmly but do not overtighten Step 5 - Tighten all bolts so cot is safe to use and use recommended mattress size 1310mm x 750mm x 120mm

7 Bassinet - Assembly Assembly overview Optional baby bassinet kit Parts List Bassinet Base x 1 Bassinet Headboard x2 Side panels x 2 Hardware List ( Bassinet kit ) M6 x 15 Cap Screw8 M6 x 70 Bolts x 8 Screws x4 Locating brackets x 4 Castors x4 Warning Small parts can present a choking hazard. Always keep small parts out of reach of children both during and after assembly. Store any spare or unused parts in a safe place. We recommend tightening all screws and connectors by hand. If using a cordless driver, set the speed to a slow setting and the clutch to a low setting to prevent execessive tightening that may result in damage to your furniture. Recheck tightness Re-tighten all connector screws (at least two months after assembling the cot), as some connectors may loosen as the cot settles. Periodically check all of the connector screws, making sure they are tight.

8 Step 1 : Screw in the 8x15mm cap screws to the 8 base level holes from side panels as shown. M6 x 15 Cap Screw x 8 M6 x 15 Bolts x 8 Step 2 : Use the 4 Screws to attach Locating brackets to the base in the pre-drilled holes as shown. Screws x4 Locating brackets x 4 Step 3 : Use the 4x70mm bolts to attach side panels to headboard as shown. M6 x 70 Bolts x 4

9 Step 4 Place base into bassinet and lock in using allocated hole in headboard and locating brackets. Using remaining 4x70mm bolts to attach remaining headboard. M6 x 70 Bolts x 4 Step 5 : Push castors into holes on the bottom of bassinet.they are self locking. Step 6 Place mattress onto base,and bassinet is ready for use.

10 Double Bed - Assembly Optional double bed kit purchased separately Step 1 - Attach the bed rails to the bed heads M8 x 30 Bolts8 Washer x 8 Spring Washer x 8 Align the holes on the brackets with the locating holes on the bed head frames. Secure the brackets to the frames with the connector screws. Lightly hand tighten all screws first, then after initial assembly, fully tighten all screws Do do not overtighten. Step 2 - Insert dowel pins to bed rails 8 x wooden dowel pins Insert the wooden dowel pins as shown.

11 Step 3 - Attach base frames Unfurl the lattice base frames. Note:Do not cut the fabric webbing that holds the slats together Fit the lattice base frames between the bed rails. To secure the frames, stretch the first and last slat of the over the corresponding dowel pins Do not cut the fabric webbing Repeat this step for all remaining sides. Stretch the first and last of the base frame over the dowel pins. Step 4 - Insert cap screws x4 4 x 15mm cap screws IMPORTANT SAFETY STEP Fit the small cap screws to the 4 remaining unused locating holes (2 on each bed head). This is a required safety step to prevent the entry of small fingers into these holes.

12 Guarantee and Warranty Warranty,

Verona Cot RECYCLED. Assembly and care instructions. Cot. Bassinet. Double Bed - Optional Kit. Junior Bed

Verona Cot RECYCLED. Assembly and care instructions. Cot. Bassinet. Double Bed - Optional Kit. Junior Bed TM Verona Cot Assembly and care instructions This cot can be assembled in a number of configurations. Instructions for all configurations are included in this manual. Cot Bassinet Mattress and accessories