ZDIS 01 rev: 00. Disassembly Instructions ZIRA
|
|
- Ethan Fletcher
- 6 years ago
- Views:
Transcription
1 ZIRA Double Pedestal Desk Disassembly Instructions Z7...FB Z FB Z7...FB3 Z FB Z7...FB3 Z FB3 Z7...FB33 Z FB33 Z7...F Z F Z F Z7...F3 Z F3 Z F3 Z7...F3 Z F3 Z F3 Z7...F33 Z F33 Z F33 TOOLS REQUIRED PHILLIPS Screwdriver size # Rubber Mallet Safety Glasses ZDIS 0 rev: 00 WRENCH Size #6 or 5/ 7 A Remove Drawers by Fully Extending and Disengaging latch on each slide while pulling drawer out. B On Drawer boxes, unscrew and remove slide channels. Remove hanging file system. C Remove Aluminium Cleat Cover. Unscrew and remove leveler. Unscrew and remove aluminium cleat and modesty panel. D Unscrew and remove pedestal. E On Pedestal, slide PVC cover on front edge extrusion off exposing screws. Remove screws using a Robertson screwdriver. Pull extrusion off extrusion. F Unscrew and remove pedestal bottom and C shape metal. G On Pedestal, unscrew and remove L plates, glide channels and corner leveler. 6 3 ITEM DESCRIPTION QTY MATERIAL DESK TOP MODESTY RIGHT SIDE - PEDESTAL LEFT SIDE - PEDESTAL BACK - PEDESTAL BOTTOM - PEDESTAL KICKBASE - PEDESTAL DRAWER DRAWER FRONT HANGING FILE EXTRUSION FILING BAR CLIP FOR HANGING BAR PVC EDGE EXTRUSION W/ SLIDE CHANNEL PLATES SLIDES (INNER) SLIDES (BASE PLATE) CORNER BRACKET W/LEVELER ALUMINIUM CLEAT COVER FOR ALUMINIUM CLEAT SCREWS LOCKER 6 5 MDF PLASTIC PLASTIC ALUMINIUM PLASTIC Please contact Global Customer Care at for any questions or concerns. NOTE: Any alterations to listed components will void the manufacturer s warranty. The manufacturer will not be responsible for any damage or bodily harm caused by alterations in accordance with national or local electrical codes and manufacturer s specifications. In accordance with the manufacturer s policy of continual product improvement, the product presented in this document is subject to change without notice or obligation. ZDIS 0 Rev.00 Pg of 3
2 A B File Drawers C ZDIS 0 Rev.00 Pg of 3
3 D E F G ZDIS 0 Rev.00 Pg 3 of 3
4 Single Pedestal Desk Single Pedestal Desk Extended Corner ZIRA Z7...F L/R Z F L/R Single Pedestal Desk Single Pedestal Desk Extended Corner Disassembly Instructions Z7...F3 L/R Z F3 L/R Z7...FB L/R Z FB L/R Z7...FB3 L/R Z FB3 L/R Z7...E L/R Z E L/R Z7...EB L/R Z EB L/R Z7...E3 L/R Z E3 L/R Z7...EB3 L/R Z EB3 L/R TOOLS REQUIRED 7 PHILLIPS Screwdriver size # Rubber Mallet Safety Glasses 6 7 ZDIS 0 rev: 00 ITEM DESCRIPTION QUANTITIES MATERIAL TOP MODESTY 3 RIGHT SIDE - PEDESTAL LEFT SIDE - PEDESTAL 5 BACK - PEDESTAL 6 BOTTOM - PEDESTAL 7 KICKBASE - PEDESTAL DRAWER MDF 9 DRAWER FRONT HANGING FILE SYSTEM /PLASTIC PVC EDGE EXT. W/SLIDE CHANNEL PLASTIC PLATES/BRACKETS SLIDES (INNER AND BASE PLATE) CORNER BRACKET W/LEVELER 5 ALUMINIUM CLEAT AND COVER ALUMINIUM 6 SCREWS/BOLTS FAUX PED LARGE GABLE FAUX PED SHORT GABLE 9 FAUX PED BACK 0 LOCKER Please contact Global Customer Care at for any questions or concerns. STEPS WRENCH Size #6 or 5/ Single Pedestal Desk Single Pedestal Desk Extended Corner A Remove Drawers by Fully Extending and Disengaging latch on exposing screws. Remove screws using a Robertson screwdriver. each slide while pulling drawer out. Pull extrusion off extrusion. B On Drawer boxes, unscrew and remove slide channels. Remove F Unscrew and remove pedestal bottom and C shape metal. hanging file system. G On Pedestal, unscrew and remove L plates, glide channels C Remove Aluminium Cleat Cover. Unscrew and remove leveler. and corner leveler. Unscrew and remove aluminium cleat and modesty panel. H Untighten Blum Connectors and released Faux ped. D Unscrew and remove pedestal. I Untighten Blum Connectors from Faux ped. E On Pedestal, slide PVC cover on front edge extrusion off J Unscrew Blum and Minifix bolts. NOTE: Any alterations to listed components will void the manufacturer s warranty. The manufacturer will not be responsible for any damage or bodily harm caused by alterations in accordance with national or local electrical codes and manufacturer s specifications. In accordance with the manufacturer s policy of continual product improvement, the product presented in this document is subject to change without notice or obligation. ZDIS 0 Rev.00 Pg of
5 A B File Drawers C ZDIS 0 Rev.00 Pg of
6 D E F G ZDIS 0 Rev.00 Pg 3 of
7 H I J Blum Bolt ZDIS 0 Rev.00 Pg of
Double Pedestal Desk INSTRUCTIONS CARTONS: TT7130, MP4024, (2)PBBF30 TT-B PED-A PED-A MP-C
Page 1 Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet. TT-B Parts : TT-B: Desk Top (71 x 29.5 x 1 ) : Box Box File Pedestal (15.5 x 29.5 x 25
More information42 Single File File Pedestal Return INSTRUCTIONS CARTONS: TT4224, MP2412, PFF24 PED-H MP-F
Page 1 INSTRUCTIONS Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet. Parts : : Return Top (41 x 23.5 x 1 ) : Return odesty (25.5 x 12 x 1 ) : File
More informationcompile system INSTALLATION GUIDE Updated January 2019
INSTALLATION GUIDE Updated January 09 compile system Table of Contents Panels 0 Quick Connect Clips 0 Lock Clips 0 Panel Trims 0 Privacy Glass 0 Post Base Covers 04 Electrical 04 Power Distribution Harness
More informationSTEP 1 STEP 6 STEP 5 STEP 1 STEP 3 STEP 4 STEP 7
Step 1:Attach the tube join support by sliding in tube into legs, make sure height of the 2 legs are the same. Step 2:Attach the second join support in front of the tube join support using provided allen
More informationASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE
ASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE (1) COMPONENT LIST FOR RIGHT & LEFT HAND "J" TABLE NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. 24" x
More informationTopo Freestanding Applications - Private Office
4 3 2 Topo Freestanding Applications - Private Office Combo Wrench If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com
More informationTable of Content. Sayl Disassembly for Recycling
Y Sayl Disassembly for Recycling Table of Content 1. Work Chair Disassembly... 2 2. Side Chair Disassembly...17 3. Work Stool Footring Disassembly... 22 1 Y Sayl Disassembly for Recycling Work Chair Disassembly
More information12 X 15 SOLARIUM ASSEMBLY INSTRUCTIONS
115 1 X 15 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 1 ½ x15 6, Largest Dimensions 13 6 x16 11 (see pg.13) L:\WP51\Instructions\SOLARIUMS INSTRUCTION
More informationXbox One X Project Scorpio Edition Outer Case Replacement
Xbox One X Project Scorpio Edition Outer Case Replacement Removing the external casing for the Xbox One X Project Scorpio Edition gaming console made by Microsoft in 2017. Written By: Ashley Masuda ifixit
More informationEnd of Product Life. Tables
End of Product Life Tables Contents Tables 03 End of Product Life Introduction 04 Repairability and Recyclability Anatomy of a Product Standard Components 05 Disassembly Instructions 09 Recycling the Disassembled
More informationProduct must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product.
General Notes These installation instructions are intended to be comprehensive for a typical Keyeira/Presto configuration. Your configuration may differ. If you have questions contact Geiger Customer Service
More informationASSEMBLY INSTRUCTIONS FOR DESK & CREDENZA PRODUCTS
ASSEMBLY INSTRUCTIONS FOR DESK & CREDENZA PRODUCTS (1) COMPONENT LIST FOR DESK & CREDENZA PRODUCTS NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. 24" x 72"
More informationEnd of Product Life. Tables
End of Product Life Tables Contents Tables 03 End of Product Life Introduction 04 Repairability and Recyclability Anatomy of a Product Standard Components 05 Instructions 08 Recycling the Disassembled
More informationX 12 SOLARIUM ASSEMBLY INSTRUCTIONS Two or more adults required for assembly
adlonco@hotmail.com 1212-12 12 X 12 SOLARIUM ASSEMBLY INSTRUCTIONS Two or more adults required for assembly Base Dimensions 12 ½ x12 ½, Largest Dimensions 13 6 x13 6 (see pg.1) Overall Height 110 ZZZ-182.1212-12.1030-15.GP.EN.HER
More informationRight. Side Tower-Overhead Combination Revised 11/12/05 ON SITE A,B D,E C
Right ON SITE Side Tower-Overhead Combination Revised 11/12/05 2 Installation of Side Tower-Overhead Combination units is easy when the correct SEQUENCE is followed. 3 Your unit consists of the following
More informationImportant Loading Information. Tools Required. Meridian Lateral Files Instructions
Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information
More informationINSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT
INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT CARTON CONTENTS PART 1 - CABINET ASSEMBLY QUANTITY DESCRIPTION CARTON #1 1 CABINET COMPONENTS PART 2 - WALL MOUNTING QUANTITY DESCRIPTION
More informationAssembly Instructions COMO DESK CORNER
Assembly Instructions COMO DESK CORNER WARNING NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY 2 Read Instructions carefully. Check no parts are missing.
More information12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS
1218 12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 12 ½ x18 11, Largest Dimensions 13 6 x20 ½ (see pg.1) L:\WP51\Instructions\SOLARIUMS INSTRUCTION
More informationTransit Connect Full/Half Installation Instructions
GATHER THESE TOOLS FOR ASSEMBLY & INSTALLATION 7/16 wrench, T45 Torx socket, 7/16 socket, 3/8 drive ratchet - 3/8 socket One 1/8 square end driver bit provided - Electric drill/driver/18v cordless One
More informationWARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND
SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE
More informationCDAS CDAS39 SHELF UNIT
BY CDAS CDAS39 SHELF UNIT 0708 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationMH60/MH72 DESK HUTCH IMPORTANT!
MH60/M2 DESK HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process and help
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationDRAWER Mitsubishi pajero lwb
DRAWER Mitsubishi pajero lwb SSDS601 / SSMP001 INSTALL TIME: 45 mins Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System
More informationa.k.a. casegoods instructions
a.k.a. casegoods instructions a a.k.a. workwall installation IMPORTANT NOTES Failure to install product according to installation instruction will result in loss of warranty. Tools required for assembly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TABLE OF CONTENTS Pull Installation...2 Drawer Removal & Installation...3 Pendaflex Bars...4 Digital Lock...6 Adjustable Shelves...7 Side Access Locker...9 Floating Shelves...11
More informationbridges Installation Manual
bridges Installation Manual 0 OHSAS 800:007 CGSB #0HS-009 ISO 900:008 CGSB #96- ISO 00:00 CGSB #EMS-00 Global Contract Inc. 6 Petrolia Road North York, Ontario, MJ X8 Visit us on the Internet at globalcontract.com
More informationEnd of Product Life. Side & Stacking Chairs
End of Product Life Side & Stacking Chairs Contents Side & Stacking Chairs 0 End of Product Life Introduction 04 Repairability and Recyclability Anatomy of a Product Standard Components 06 Disassembly
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationCompile Installation Manual
Compile Installation Manual 07 OHSAS 800:007 ISO 900:05 ISO 400:05 Global Contract Inc. 565 Petrolia Road REVISED: FALL 07 North York, Ontario, MJ X8 Visit us on the Internet at globalcontract.com (46)
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More informationWellington Wallbed 700 Series Assembly Instructions
Wellington Wallbed 700 Series Assembly Instructions 1. Read all instructions before proceeding. Not following instructions may result in personal harm or damage to the furniture. 2. 2 people are required
More informationNewHeights Presidente Reception Assembly Instructions Warranty: raproducts.com/warranty
NewHeights Presidente Reception Assembly Instructions Warranty: raproducts.com/warranty Failure to comply with or observe all assembly, safety, and operation instructions and warnings regarding use of
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationEPPA2-KIT DUAL MONITOR ARM CONVERSION
EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationMCH42 / MCH48 MODULAR SERIES 2400/3000 CORNER HUTCH
/ MODULAR SERIES 2400/3000 CORNER HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationAssembly Instructions
Assembly Instructions Workbench Model: GR 1902 (Tan) Dimensions (D x W x H): 24 x 48 x 60 GR1902B (Black) For Instruction Assistance (800) 736-7225 WEEKDAYS: 8:00 a.m. - 5:00 p.m. Pacific Standard Time
More informationWARNING. AST = Astoria Sky finish Assembly Instructions CUSTOMER SERVICE. Model # 2239AST Ellison Cal-King Adjustable Storage Bed
Model # 2239AST Ellison Cal-King Adjustable Storage Bed AST = Astoria Sky finish IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. Remove items before you move this unit.
More informationEffective November corby INSTALLATION GUIDE
Effective November 2017 corby INSTALLATION GUIDE PRODUCT INSTALLATION CBYCTxxxxHxx - Occasional table CBYRxx32 - Peninsula table CBYRTxxxx - Freestanding work table CBYCMPWxxHxx - Modesty panel CBYRxx32
More information** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:
3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back
More informationModular Teacher s Desk Systems
Modular Teacher s Desk Systems ssembly Instructions 1 Modular Teacher s Desk Components Part Drawing Description Qty Part Drawing Description Qty 90390 djustable Leg-1S 90369 Modular Pedestal 90391 djustable
More informationoffice casework the catalog
office casework the office casework catalog DESCRIPTION TMI NO. PAGE DESCRIPTION TMI NO. PAGE ACCESSORIES Accessory Tops: X2000, X2100 13 Geoshapes: X4000, X4100, X4300 13 Grommets: A2340, A2350, A2360
More informationCOCKPIT CORNER UNIT WARNING. Illustration 1. Read all instructions and review illustrations before installing. Tools required for assembly:
Illustration 1 Illustration 2 Right side of Illustration 3 Right brace Right brace Read all instructions and review illustrations before installing. Tools required for assembly: Phillips screwdriver Rubber
More informationOasis Recliner Disassembly Instructions
These instructions may be used to disassemble all versions of our Oasis Recliner seating line and available options. Time Required: 20 minutes. (Internal metal frame) D: Reaching up and inside the back,
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationCopy OWNER S MANUAL MODEL N Keep this Identification Number in case you must contact our Customer Service Department.
MODEL N 80055 OWNER S MANUAL Copy Keep this Identification Number in case you must contact our Customer Service Department. REGISTER YOUR LIFETIME PRODUCT TODAY! There are benefits to registering your
More informationSeries 4 HV Single Monitor Lift Assembly Instructions
6703 Zinser Street Schofield, WI 54476 6/13/17 Series 4 HV Single Monitor Lift Assembly Instructions Read all the instructions before beginning. Hardware Pack # 53368 Page1 OF 6 Tools Required for Assembly:
More informationTools Required: Materials Identification and Segregation: Disassembly Steps: Aeron Disassembly for Recycling
Y Aeron Disassembly for Recycling Tools Required: Power Driver 2 lbs Hammer Torx Bit Safety Glasses Rubber Mallet Materials Identification and Segregation: Where possible, plastic components are marked
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationInstruction Sheet D-CPU. Secure CPU Holder
Instruction Sheet D-CPU Secure CPU Holder I-00457 Rev A PARTS LIST NOTE: Select Security Components when a more secure application is desired. Mounting Track with Mounting Tape Security Bracket Assembly
More informationinstallation guide ICON classic benching
installation guide ICON classic benching Index ICON Installation Guide Single Run Frame Assembly... Worksurfaces and Electrical... Attaching Worksurfaces to Frame...6 Installing optional accessories...7
More informationInstallation Instructions
Installation Instructions Optima LED 8 Double-Sided StretchLite Perimeter Lit Graphic Display Line Voltage Connector Optima LED DS5 (Double-sided StretchLite Graphic Display) with Graphics Corner Bracket
More informationRef Qty Part Description Part Number 1 1 Headlight-LED Nylon Tie Strap Instructions
LED LIGHTS KIT P/N 2880289; 2880621 APPLICATION MY15-16 INDIAN MOTORCYCLES WITH THUNDERSTROKE 111 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationBasic Assembly For Conventional Series 9000 Structural Panels
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Basic Assembly For Conventional Series 9000 Structural Panels NOTE: Assembly directions for curved panels are the same as standard panels. Tools
More informationDisassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
More informationSteel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815)
Steel Solutions USA 602 E. Walnut Street Watseka, IL 60970 p: (888) 875-5004 f: (815) 432-3364 sales@steelsolutionsusa.com Published February 2011 2011 Steel Solutions USA. All rights reserved. version
More informationASSEMBLY INSTRUCTIONS CORONA 2 DOOR 1 DRAWER WARDROBE
ASSEMBLY INSTRUCTIONS CORONA 2 DOOR 1 DRAWER WARDROBE IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR CORONA 2 DOOR 1 DRAWER WARDROBE PLEASE KEEP THESE INSTRUCTIONS
More informationSUT-1000CLC ASSEMBLY REQUIREMENTS
SUT-1000CLC Torque wrench, carpenters square, wire cutters, Phillips screwdriver, 7/16, 9/16, and 3/4 combination wrenches, ratchet, 9/16, 3/4, 13/16, and 7/8 sockets. ASSEMBLY REQUIREMENTS *Torque all
More information12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS
adlonco@hotmail.com 1218 12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 12 ½ x18 11, Largest Dimensions 13 6 x20 ½ (see pg.1) ZZZ-18.1218.0530-1.GP.EN.HER.doc
More informationMercer Crib (M6801)- Assembly and Operation Manual
Mercer Crib (M6801)- Assembly and Operation Manual Congratulations on purchasing this product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance,
More informationCustom Wood Frame Overlay for Glass Doors Installation Instructions
MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers
More informationSpeaker Mount Center Channel Speaker Adapter (PAC-301)
I N S T R U C T I O N M A N U A L Speaker Mount Center Channel Speaker Adapter () The Speaker Mount Center Channel Speaker Adapter () uses the same interface as the Side Speaker Adapter and can be used
More informationDUO TM 6241 PEDESTAL DESK
DUO TM 6241 customerservice@ Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register
More informationWEIGHT ADJUSTABLE ESPREE. Model 2ESP-WA-C48- Model 2ESP-WA-C60- 2ESP-WA Rev B 8/17 ASSEMBLY AND OPERATION
WEIGHT ADJUSTABLE ESPREE PNEUMATIC TABLE BASE 2ESP-WA Rev B 8/17 Model 2ESP-WA-C48- Model 2ESP-WA-C60- = SLV, BLK or WHT ASSEMBLY AND OPERATION PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationIAC INDUSTRIES 895 BEACON STREET BREA, CA Phone (714) Fax (714) Workmaster Assembly Instructions
INDUSTRIES WORKMASTER SERIES Part #1 REV. (022011) IAC INDUSTRIES 895 BEACON STREET BREA, CA 92821-2926 Phone (714) 990-8997 Fax (714) 990-0557 www.iacindustries.com Workmaster Assembly Instructions Table
More informationLW36 LAB WORKSTATION IMPORTANT!
BY LW36 LAB WORKSTATION 01/06 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationDisassembling HP Envy TouchSmart 15 Heat
Disassembling HP Envy TouchSmart 15 Heat Sink Removal of the Heat Sink Written By: Ramon Villadonga ifixit CC BY-NC-SA www.ifixit.com Page 1 of 14 INTRODUCTION You may need to replace or re-seat your heatsink
More informationAssembly Instructions for Laser Sailboat Dolly (with Beach Wheels for 1 Axle & Ramp Wheels with Reversible Axle)
Assembly Instructions for Laser Sailboat Dolly (with Beach Wheels for 1 Axle & Ramp Wheels with Reversible Axle)! IMPORTANT: Before you begin, please read these instructions and check to be sure that all
More informationZAPF PANEL SYSTEM ASSEMBLY INSTRUCTIONS. It is recommended that the components be installed in the sequence of this assembly manual.
ZAPF PANEL SYSTEM It is recommended that the components be installed in the sequence of this assembly manual. ASSEMBLY INSTRUCTIONS OFFICE FURNITURE FOR THE INFORMATION AGE Table of Contents INSTALLATION
More informationASSEMBLY INSTRUCTIONS LYNX 2 DOOR SLIDING ROBE WITH MIRROR
ASSEMBLY INSTRUCTIONS LYNX 2 DOOR SLIDING ROBE WITH MIRROR IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR LYNX 2 DOOR SLIDING ROBE WITH MIRROR. PLEASE KEEP THESE INSTRUCTIONS
More informationShelf Converter Drawer System
Shelf Converter Drawer System Installation and Use Instructions IF THIS PRODUCT IS INSTALLED IN A UNIT THAT DOES NOT MEET THE MINIMUM SYSTEM REQUIREMENTS, INJURY COULD RESULT. (SEE PAGE 2) Shelf Converter
More informationSignal Mirror Installation Instructions
Signal Mirror Installation Instructions Honda CRV 1997-2003 THE safety accessory of the 21 st Century. P/N 210-0032-0 Rev B2 (6-26-04), GG 2003 Muth Mirror Systems, LLC. Note: Professional Installation
More informationIDP Entry-Fit Steel Door Frames. Installation Instructions K2A and NK2A Series Frames
IDP Entry-Fit Steel Door Frames Installation Instructions K2A and NK2A Series Frames IDP Inc 21300 W. 8 Mile Rd. Southfield, MI 48075 1-877-645-2770 www.idpframes.com email: info@idpframes.com K2A and
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationBolt-On/Rugged Fender Flares Toyota Tundra (14-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY Extrusion 28.0 ft Short Screw 18 Nuts 42 Alcohol Wipe 4 Long
More informationStonewood Beds RGB = Rustic Glazed Brown finish Assembly Instructions Model #
Stonewood Beds RGB = Rustic Glazed Brown finish Model # 1716RGBb Stonewood Queen Storage Bed 1726RGBb Stonewood King Storage Bed 1746RGBb Stonewood Queen Bed 1749RGBb Stonewood King Bed Thank you for allowing
More informationBase Cabinet w/drawers
Base Cabinet w/drawers WSBC-4C Dark Cherry finish WSBC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Pacific Standard Time: 8:30 a.m.
More informationInterra Installation Manual
Interra Installation Manual Instructions to install the Friant Interra panel system Friant & Associates, LLC Table of Contents Getting Started Introduction... 3 General Tools, Staging & Safety... 4 Before
More informationHOMECREST STYLE SLING 3J300 Installation Instructions
1 HOMECREST STYLE SLING 3J300 Installation Instructions Before beginning, take careful note of how the chaise is assembled, particularly the adjustment hardware. An additional set of hands to help during
More informationSignal Mirror Installation Instructions
Signal Mirror Installation Instructions 2006 2007 Honda Ridgeline THE safety accessory of the 21 st Century. P/N 210 0142 0 Rev. A (9/5/07), BTV 2007 Muth Company, LLC Professional Installation Recommended:
More informationCirco Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)
Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start
More informationKitchen Work Cabinet Item #377635
Thanks for shopping with Improvements! Kitchen Work Cabinet Item #377635 To order, call 1-800-642-2112 West Chester, OH 45069 Made in Thailand 0912 Rev B If you have any questions regarding this product,
More informationBelhaven Executive Desk Model # BEHED
LOT NUMBER: DATE PURCHASED: / / Belhaven Executive Desk ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationThanks for shopping with Improvements! Chapin Secretary Desk Item #398643
Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have
More informationLateral/ Single Shelf Low Credenza INSTRUCTIONS CARTONS: TT6020, PLF3020, PSC3020
Page 1 INSTUCTINS rganize your parts and hardware. You will need (2) people, a Phillips head screwdriver and a rubber mallet. TT-H LS-E PED-L LS-D PED- LS-B Parts : Figure 1: : Back Panel (28 x 17.25 x
More informationReplacing a Wheel on the Pinch Wheel assembly
14140 NE 200th St - Woodinville, WA. 98072 - PH: (425) 398-8282 - Fax: (425) 398-8383 Replacing a Wheel on the Pinch Wheel assembly Determine which pinch wheel assembly your plotter or cutter has. See
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationHZ1032A0TX/ HZ1032B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions
HZ0A0TX/ HZ0B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service -800--509 service@seidal.com www.seidal.com Due to weight,
More informationSTAKS. Crossover Casegoods ASSEMBLY INSTRUCTIONS
STAKS Crossover Casegoods ASSEMBLY INSTRUCTIONS Installation Sequence 1. Wall Panels a. Connector Kit Part Identification 3 b. T - 3 Panel Connection Preparation 4 c. X Panel Connection Preparation 5 d.
More informationWritten By: Arnoud Meines
Phillips Azure Steam Iron Disassembly A step by step description of the disassembly of the Philips Azure Steam Iron. Written By: Arnoud Meines ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION
More informationThanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item #
-- Thanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item # 568376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not
More informationJK JEEP MIDWIDTH FRONT BUMPER
SIGNATURE SERIES JK JEEP MIDWIDTH FRONT BUMPER INSTALLATION INSTRUCTIONS **PLEASE READ THROUGH THE INSTRUCTIONS BEFORE BEGINNING ANY PART OF THE INSTALLATION PROCESS** 1. Begin the installation of your
More informationWHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - VK-2921 - General Layout Step 1 10 20 Plan View Page 1 of 6 Order #XXXXX - General Information Step 2 Using Your Setup Instructions The Visionary Designs Setup Instructions are created specifically
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More information