Cable drag chain systems

Size: px

Start display at page:

Download "Cable drag chain systems"

Meghan McCoy
6 years ago
Views:

4050-F Skyron Drive Doylestown, PA 18901

1 Cable drag chain systems 2004 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

2 Contents Introduction Perfect solutions... 6 Advantages 8 Overview of inside width/inside height 18 Overview of configurations 20 Overview of construction types/travel distances 22 Overview of chain link composition 24 Technical data for open cable drag chains 26 Technical data for enclosed cable drag chains 36 Information about ESD cable drag chains 38 Selecting a cable drag chain 40 Laying out cables and conduits 42 Mounting options 44 Inquiry form 46 Open cable drag chain systems MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP Internet: cablemgmt@murrplastik.com Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 3

3 i Contents Enclosed cable drag chain systems Appendix MP 25 G 253 MP 36 G 259 MP 43 G 267 MP 65 G 275 VAW adaptable guide channel systems 283 ZL strain relief plate systems 305 Material Data 313 Technical support & service 319 Delivery program 320 Sales Agencies Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

4 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

5 Perfect solutions start with specific questions murrplastik Systemtechnik has been supplying cable drag chain systems for many years. The constant exchange of information with our customers helps us to develop new innovative products and to extend our delivery program continuously. This close relationship with the customer has created high value cable drag chains. Our complete programm of cable drag chains line: Cable drag chains, guide channels, cables, strain reliefs, and ready-to-use assemblies. Our chains have proven their quality under extreme continuous loads and extreme environmental influences. From our range of diverse systems and in talking with customers, our experts choose the most suitable solution for each customer s application. For this purpose, we have developed a procedure that allows 6 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

6 us to determine customer needs quickly and accurately and in turn find the right application-specific solution. The philosophy of cable drag chains murrplastik Systemtechnik offers cable drag chain systems with optimum mechanical properties and outstanding application value for our customers. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

ATEX chains Safety in conformity with ATEX CE EX II 2GD Moving security ESD cable drag chain systems are highly conductive chains suitable for use in EX zones and clean rooms.

Our cable drag chains are designated with this certification: CE EX II 2GD The CE certification means that murrplastik has tested its chains as devices.

7 ATEX chains Safety in conformity with ATEX CE EX II 2GD Moving security ESD cable drag chain systems are highly conductive chains suitable for use in EX zones and clean rooms. All mechanical components comply with the ATEX norm since July Our cable drag chains are designated with this certification: CE EX II 2GD The CE certification means that murrplastik has tested its chains as devices. This has certain advantages: First, the chain no longer needs to be approved by a specialist. Second, when replacing a chain, you can continue to work with the murrplastik CE chain immediately. And finally, because the approval procedure is no longer necessary, you save time and money. With our CE certified chains, you are always on the safe side! Advantages: Full ATEX certification CE EX II 2GD murrplastik assumes liability Easy replacement, certification remains valid Valid for EX zones 1, 2, 21, 22 No additional approval required by specialists 8 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Lay the frame ridge in the side links and lock by hand. With other chains, retrofitting is almost impossible. The click lock mechanism makes it child s play.

8 Click lock Click and ready Fast and easy You can quickly assemble and change crossbars with a minimum of effort. Place the screwdriver between side link and frame ridge and turn slightly to open the click lock. A cable can also be easily and quickly retrofitted in the chain. Assembly is even easier. Lay the frame ridge in the side links and lock by hand. With other chains, retrofitting is almost impossible. The click lock mechanism makes it child s play. Faster and easier assembly and disassembly is hardly possible without compromising stability. Advantages: Fast assembly: Click and ready! No tools needed Easy assembly Retrofitting cable is easily done Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 9

The click lock feature in combination with the hinged shelving system even makes it possible to perform modifications after installation.

9 i Hinged shelving system Extremely adaptable Flexibility is the key Innumerous options are possible with hinged shelving systems. It is extremely easy to find the most suitable configuration for custom requirements. The click lock feature in combination with the hinged shelving system even makes it possible to perform modifications after installation. The shelf separators snap firmly into the crossbars and cannot slip. For each mounting option side mounted, reverse, etc. the cables remain in the originally required position. This means long life and no one-sided chain wear. Advantages: Easy assembly Snap-in separators Fixed position Fast assembly Modifications possible after installed 10 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

Variable crossbars Variable fixed crossbars Variable and yet fixed The crossbars come in two variants: plastic or aluminum. The plastic variant is standard and is available in many width increments.

For both plastic and aluminum variants, separators snap into the crossbars and are secured. The separators remain in their designated position with all assembly types and movements.

10 Variable crossbars Variable fixed crossbars Variable and yet fixed The crossbars come in two variants: plastic or aluminum. The plastic variant is standard and is available in many width increments. The aluminum version can be delivered in any width required. It is used especially for widths over inch. For both plastic and aluminum variants, separators snap into the crossbars and are secured. The separators remain in their designated position with all assembly types and movements. Crossbars and separators form a single unit. The murrplastik crossbars are variable and yet flexible. Advantages: Flexible adjustment due to closely spaced lock tabs Fixed with lock tabs Variable length Extremely sturdy Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 11

Both bushings prevent cold flow deformation properties when screwing and ensure an extremely good seat.

11 i Chain connection Optimal connections Fast and easy assembly In the chain brackets, metal bushings are permanently molded into the plastic. There are two versions: threaded bushings and thru bushings. Both bushings prevent cold flow deformation properties when screwing and ensure an extremely good seat. The threaded bushing is screwed on directly without a nut. Secure, very compact chain fastening without a fuss. Advantages: No cold flow deformation properties Fast Secure fastening Compact 12 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Integrated strain relief Time and space saving Easy and reliable strain relief No cumbersome special constructions for cable strain relief.

The cable is secured on the strain relief bar on two sides. It is not possible for the cable tie to slip down, since the bar encloses the cable tie ergonomically.

12 Integrated strain relief Time and space saving Easy and reliable strain relief No cumbersome special constructions for cable strain relief. Everything about murrplastik cable drag chain systems is fast and reliable. Special strain relief crossbars are used on the chain brackets. Strain relief is achieved by cable ties. The cable is secured on the strain relief bar on two sides. It is not possible for the cable tie to slip down, since the bar encloses the cable tie ergonomically. This integrated strain relief system can be very quickly mounted and requires little space. Advantages: Easy to assemble Compact construction Cost saving Space saving Reliable strain relief Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

i Pre-tension Every type of tension Flexible with many possibilities Low installation height and small radii are becoming increasingly important.

The construction remains flexible and compact, without any loss of service life.

13 i Pre-tension Every type of tension Flexible with many possibilities Low installation height and small radii are becoming increasingly important. Our reverse radii satisfy these criteria. This means a smaller radius and no limitation of the chain connection position. The construction remains flexible and compact, without any loss of service life. Advantages: Reduced installation space (reverse) Greater self-supporting storage (pre-tension) Better gliding behavior (without pre-tension) High endurance 14 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

High acceleration Extreme loads High acceleration & high endurance Are you looking for cable drag chains that can guarantee extremely fast acceleration and yet are highly

The cable drag chain was designed not to be a limiting factor. For extreme applications we can help you with high-load capability chains and competent technical advice.

14 High acceleration Extreme loads High acceleration & high endurance Are you looking for cable drag chains that can guarantee extremely fast acceleration and yet are highly durable? Then you re at the right place Murrplastik Systems, Inc. Development is geared to high acceleration values and long service life. The cable drag chain was designed not to be a limiting factor. For extreme applications we can help you with high-load capability chains and competent technical advice. Advantages: Extreme acceleration Long service life High continuous load capability Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 15

i VAW guide channels Guide channel system For fastest possible assembly The VAW variable guide channel system is designed to work with murrplastik cable drag chains.

The aluminum guide channel is fastened to the base with clamping pieces. No screws, no welding.

15 i VAW guide channels Guide channel system For fastest possible assembly The VAW variable guide channel system is designed to work with murrplastik cable drag chains. The aluminum guide channel system can be quickly adapted to various chain types and chain widths. Installation is fast and simple. The aluminum guide channel is fastened to the base with clamping pieces. No screws, no welding. Simply press special plastic connectors into the slot to establish an aligned transition between two profiles. This well-designed guide channel system saves up to 70 % working time. Advantages: Fast and easy assembly High quality Significant cost savings Adaptable system 16 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Ready-to-use assembly Ready-to-use assembly Everything from one source Reduce your workload and take advantage of our many years of chain layout experience.

You get a ready-to-use assembly which you only need to install. Thanks to our many years of experience with cable drag chains and cables, both components combine to produce one system.

16 Ready-to-use assembly Ready-to-use assembly Everything from one source Reduce your workload and take advantage of our many years of chain layout experience. We will assemble complete cable drag chains with cables upon request. We will also handle the layout, assembly and ordering of individual parts. You get a ready-to-use assembly which you only need to install. Thanks to our many years of experience with cable drag chains and cables, both components combine to produce one system. This guarantees long service life. Advantages: System guarantee Easy handling Ordering is easier than ever Reduced storage costs Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 17

17 Overview of inside width/inside height Inside height of chain in inches 0.39 MP MP MP MP MP MP 25 G 1.02 MP MP MP MP MP 36 G 1.50 MP 43 G 1.57 MP MP MP MP MP 65 G 2.36 MP MP MP MP MP 102 ESD material open closed variable width variable width available Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

18 MP 10 MP 14 MP 15 MP 18 MP 2000 MP 25 G MP 26 MP 3000 MP 32 MP 35 MP 36 G MP 43 G MP 44 MP 41 MP 42 MP 52 MP 65 G MP 66 MP 62 MP 72 MP 82 MP Inside width of chain in inches Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 19

19 i Overview of configurations Type Chain connections FL Flange connection for enclosed chains Stainless steel FL Flange connection for enclosed chains Galvanized steel KA Chain connection using angle Galvanized steel KA Chain connection using angle Stainless steel KA steel U-part Chain connection using U-part Galvanized steel KA steel U-part Chain connection using U-part Stainless steel KA-F Flexible chain connection with stop with bushing FB or thread FG KAF Flexible chain connection without stop with bushing FB or thread FG KA Standard chain connection Plastic for U-part chains KA Chain connection with plastic/galvanized steel anglefor sideband chains KA Chain connection with angle Plastic/stainless steel for sideband chains 0.39 MP MP MP MP MP MP MP 25 G 1.02 MP MP MP MP MP 36 G 1.50 MP 43 G 1.57 MP MP MP MP MP MP MP 65 G 2.36 MP MP MP MP MP MP inch 1.77 inch Standard Standard Stainless steel 20 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

20 Separators/shelving systems Strain relief RE H-shaped shelf TR Fixed separator TR Movable separator TR-Alu Separator for aluminum frame ridge RT-Alu Shelf support for aluminum frame ridge RTA Outside shelf support MP 32/41/52... RTI Inside shelf support RBT Shelf for separators RT Shelf support RB - 5 Shelf RTT Divisible shelf support RE - 5 Shelf for RT RB - 7 Shelf TS - 5 Pitch bar for aluminum crossbars TS -7 Pitch bar for aluminum crossbars RSV Crossbar connectors for plastic RS-ZL crossbars with integrated train relief C-shaped bar Hooped clamps ZL Strain relief bar Alu Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 21

21 i Overview of construction types/travel distances Inside height Hi Type Inside width Bi Bend radius R Opening variants/configurations inch from inch to from inch to Non-opening Easy mechanism Inside flexure curve 0.39 MP MP MP MP MP MP MP 25 G MP MP MP MP MP 36 G MP 43 G MP MP MP MP MP MP MP 65 G MP MP MP MP MP MP Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

22 Opening variants/configurations Self-supporting arrangement Gliding arrangement Inside and outside flexure curve Inside flexure curve hinged Outside flexure curve hinged Travel distance Lf ft 3.28 Speed v f max ft/s Acceleration a f max ft/s² 6.56 Travel distance Lf ft Speed v f max ft/s 6.56 Acceleration a f max ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 23

23 i Overview of chain link composition Side links PowerLine HeavyLine SG 32 Side link for both side runs SG 41 Side link for both side runs SG 52.1 different side links per side run SG 52.2 with click locking different side links per side run SG 62.1 different side links per side run SG 62.2 with click locking different side links per side run SG 72 different side links per side run SG 82.2 with click locking different side links per side run SG 102 different side links per side run 1.26 MP MP 43 G 1.57 MP MP MP MP MP MP 65 G 2.36 MP MP MP MP MP MP Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

24 Locking Crossbars Cover MultiLine Plastic Aluminum Plastic SG 44 with radius disk Side links for both side runs SG 66 with radius disk Side links for both side runs RS-5 locking, red RS-6 locking, red RS-8 locking, red RS-5 Frame ridge in various lengths RS-7 Frame ridge in various lengths RL Frame ridge in various lengths RS-Alu-5 Aluminum frame ridge in various lengths RS-Alu-7 Aluminum frame ridge in various lengths RS-Alu Aluminum frame ridge in various lengths A-43 Cover closed outside I-43 Cover closed inside RA-65 Cover closed outside RI-65 Cover Cover closed inside Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

25 Overview Technical of data cable for drag open chain cable systems, drag chains open MP 10.1 Page 49 MP 14 Page 55 Inside height: 0.39 inch Inside width: inch Radii: inch Chain pitch: 0.59 inch Links per foot: 21 pcs. Loading side: Outside flexure curve slotted ESD version available Inside height: 0.55 inch Inside width: inch Radii: inch Chain pitch: 1.02 inch Links per foot: 12 pcs. Loading side: Outside flexure curve MP 15 Page 61 Inside height: 0.55 inch Inside width: inch Radii: inch Chain pitch: 1.02 inch Links per foot: 12 pcs. Loading side: Non-opening ESD version available MP 18.1 Page 67 Inside height: 0.71 inch Inside width: inch Radii: inch Chain pitch: 1.30 inch Links per foot: 10 pcs. Loading side: Outside flexure curve ESD version available MP 18.2 Page 73 Inside height: 0.71 inch Inside width: inch Radii: inch Chain pitch: 1.30 inch Links per foot: 10 pcs. Loading side: Inside flexure curve ESD version available 26 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

26 Technical specifications Load diagram Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 6.56 ft Vertical standing travel distance: 3.28 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: 7.28 ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 6.56 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 6.56 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 1.64 ft Gliding speed: 6.56 ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: not recommended Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 1.64 ft Self-supporting speed: ft/s Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

27 Technical data for open cable drag chains MP 2000 Page 79 Inside height: 0.79 inch Inside width: inch Radii: inch Chain pitch: 1.10 inch Links per foot: 11 pcs. Loading side: Inside flexure curve MP 3000 Page 85 MP 26 Page 95 Inside height: 1.02 inch Inside width: inch Radii: inch Chain pitch: 1.77 inch Links per foot: 7 pcs. Loading side: Inside flexure curve Shelving system available ESD version available Inside height: 1.02 inch Inside width: inch Radii: inch Chain pitch: 1.97 inch Links per foot: 7 pcs. Loading side: Inside flexure curve Shelving system available MP 32 Page 103 MP 35 Page 113 Inside height: 1.26 inch Inside width: inch Radii: inch Chain pitch: 2.54 inch Links per foot: 5 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 1.34 inch Inside width: inch Radii: inch Chain pitch: 2.28 inch Links per foot: 6 pcs. Loading side: Inside flexure curve Shelving system available 28 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

28 Technical specifications Load diagram Gliding travel distance: not recommended Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 3.28 ft Self-supporting speed: ft/s Self-supporting acceleration: 9.84 ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 2.30 ft Gliding speed: 9.84 ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 2.30 ft Gliding speed: 9.84 ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 6.56 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

29 Technical data for open cable drag chains MP 44 Page 123 MP 42 Page 131 Inside height: 1.57 inch Inside width: inch Radii: inch Chain pitch: 2.97 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available Inside height: 1.65 inch Inside width: inch Radii: inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside flexure curve Shelving system available MP 41 Page 141 MP 41.2 Page 153 MP 52.1 Page 165 Inside height: 1.65 inch Inside width: inch Radii: inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available ESD version available Inside height: 1.65 inch Inside width: inch Radii: inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available ESD version available Inside height: 2.05 inch Inside width: inch Radii: inch Chain pitch: 3.58 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available 30 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

30 Technical specifications Load diagram Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 6.56 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 3.28 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 9.84 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

31 i Technical data for open cable drag chains MP 52.2 Page 177 MP 66 Page 189 MP 62.1 Page 197 MP 62.2 Page 209 MP 72 Page 221 Inside height: 2.05 inch Inside width: inch Radii: inch Chain pitch: 3.58 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.36 inch Inside width: inch Radii: inch Chain pitch: 3.60 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 2.44 inch Inside width: inch Radii: inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.44 inch Inside width: inch Radii: inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.83 inch Inside width: inch Radii: inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available 32 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

32 Technical specifications Load diagram Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 6.56 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 6.56 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

33 i Technical data for open cable drag chains MP 82.2 Page 233 MP 102 Page 243 Inside height: 3.23 inch Inside width: inch Radii: inch Chain pitch: 4.65 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 4.09 inch Inside width: inch Radii: inch Chain pitch: 5.55 inch Links per foot: 2 pcs. Loading side: Inside and outside flexure curve Shelving system available 34 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

34 Technical specifications Load diagram Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 9.84 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

35 i Technical data for enclosed cable drag chains MP 25 G Page 253 Inside height: 0.98 inch Inside width: inch Radii: inch Chain pitch: 1.18 inch Links per foot: 11 pcs. Loading side: Inside flexure curve Shelving system available MP 36 G Page 259 Inside height: 1.42 inch Inside width: inch Radii: inch Chain pitch: 1.57 inch Links per foot: 8 pcs. Loading side: Inside flexure curve Shelving system available MP 43 G Page 267 MP 65 G Page 275 Inside height: 1.50 inch Inside width: inch Radii: inch Chain pitch: 2.97 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 2.36 inch Inside width: inch Radii: inch Chain pitch: 3.60 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available 36 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

36 Technical specifications Load diagram Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Gliding travel distance: ft Self-supporting travel distance: see diagram Vertical hanging travel distance: ft Vertical standing travel distance: ft Rotated 90º self-supporting: 6.56 ft Gliding speed: ft/s Self-supporting speed: ft/s Gliding acceleration: ft/s² Self-supporting acceleration: ft/s² Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

Information about ESD cable drag chains murrplastik Systemtechnik GmbH has ESD cable drag chain systems for use in potentially explosive locations in its product portfolio.

37 Information about ESD cable drag chains murrplastik Systemtechnik GmbH has ESD cable drag chain systems for use in potentially explosive locations in its product portfolio. All standard cable drag chains and accessories also can be delivered as special versions providing EX protection. ESD products are made of a special material that cannot be statically charged and has very high conductivity properties that not only meet the requirements of ATEX 94/9/EC but in many cases exceeds them. As of June 2003, all components and machines used in potentially explosive locations must be ATEXcompliant. murrplastik cable drag chains are certified as devices, a fact which has significant benefits for the owner/operator. Components used in our products are approved in accordance with ATEX 94/9/EC 38 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

38 and therefore no inspection of the entire machine is necessary. Additional material Information ATEX Operating Manual ESD chains brochure Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

39 Selecting a cable drag chain The layout of the cable drag chain is chosen by taking the following criteria into account: 1) Define the number and outside diameter of the cables or conduits to be routed. 2) Determine the total weight of all cables and conduits; determine cable drag chain type based on type diagram. 3) Select height and width of the cable drag chain. 4) Determine minimum permissible bend radii of the cables and conduits in accordance with manufacturer s specifications and then select bend radius of the chain. Self-supporting length and travel distance 5) Define the chain length based on travel distance and selected curvature radius (see individual chain types). 6) Check whether a guide channel is required for the cable drag chain. Section A-A: The cable drag chain glides on itself. The self-supporting length and travel distance are dependent on additional loading. To guarantee opimum running of the cable drag chain, a level track or guide channel is required. If the self-supporting length is exceeded, the upper chain carrying run will lie on the lower chain carrying run. Due to the excellent gliding properties of the plastic used, cable drag chain operation is trouble-free. The use of a guide channel is generally recommended. Details of our variable aluminum guide channel systems can be found on page 201. Section B-B: The chain runs on the glide rail. 40 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

40 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

41 Laying out cables and conduits in cable drag chains The cables and conduits must be able to move freely in the cable drag chain. Horizontally, free space around the cable/conduit should be equal to at least % of the cable/conduit diameter. Vertically, more space is required. The weight distribution of the cable drag chain should be symmetrical. Heavy cables should be laid outside; light-weight cables inside. Cables (flat/round) and conduits should, if possible, be laid individually or loosely next to each other. Laying several cables on top of each other or laying round cables or conduits (with greatly differing diameters) directly next to each other is advisable only when using separators or a shelving system. Please ask our technicians. Care should be taken to ensure that the cables and conduits can move through the curvature radius of the chain without any strain. INCORRECT CORRECT When laying cables in the cable drag chain in a multiple layer, it is important to check that they retain sufficient freedom of movement amongst themselves in the curvature (shelving system). 42 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

It is important that the cables are not twisted when laid in the cable drag chain. Cable that is wound on drums or rings should be unwound and straightened, not lifted in loops.

42 It is important that the cables are not twisted when laid in the cable drag chain. Cable that is wound on drums or rings should be unwound and straightened, not lifted in loops. Highly flexible cable of a diameter less than 0.31 inch should be laid loosely twisted in a murrflex cable protection conduit made of polyamide. The diameter of the conduit should be much larger than the sum total of the individual cable diameters. WITH PRESSURE Pressure conduits must move freely in the chain, since they become shorter, longer or their diameters change due to changing load. See the conduit manufacturer s documentation for information about length behavior. WITHOUT PRESSURE All electric cables must be strain relieved at both the moving and fixed end. For longer travel distances (gliding application), strain relief on one side at the moving end may be advisable. Care must be taken to ensure the pressure is applied only to a broad surface on the cable outer jacket. The clamping must not squash the individual wires in the cable while at the same time preventing the cable from moving. Hydraulic and pneumatic conduits only have to be strain relieved at one end. Please see our strain relief system on page 151. The murrplastik guide channels ensure that the joint between individual sections is straight and free of burrs. Nothing protrudes in the inner space of the guide channel (e.g. screws and rivets) which could affect the function of the chain. Details about our variable aluminum guide channel systems can be found on page 135. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 43

43 Mounting options 1. Horizontal, self-supporting 2. Horizontal, gliding 3. Horizontal, self-supporting overhanging with additional support 4. Horizontal, circular movement Version with reverse bending radius 5. Horizontal, side mounted (rotated by 90 0 ) 6. Horizontal, side by side 44 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

44 7. Horizontal, opposed 8. Vertical, standing 9. Vertical, hanging 10. Combined horizontal and vertical Lowered moving end connection It is sometimes necessary to lower the moving end connection for long travel distances. Please contact our application engineers. In this case, modifications in the chain layout must be observed (e.g. chain lengthening and guide channel). Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

45 Inquiry Order Company: Street/PO Box: Fax: Contact person: Date: Department: Phone: Industry: City/State/Zip code: Application parameters L 2 2 L = travel distance, R = radius, H = installation height, T = chain pitch, E = distance of entry point to center of the travel distance Mounting options T E H R Travel distance: Linear velocity: Acceleration: Freq. of operation: Items carried: Max. installation width: Max. installation height: Feed: ft ft/s ft/s 2 x/h see enclosure inch inch Center of travel distance Travel distance start/end ft from center of travel distance Chain connection Type of installation (see right): Inside/Down Inside/Up Environment influences: Ambient temperature: Guide channel present: yes no Outside/Down Outside/Up If yes, which inside width? inch If yes, which inside height? inch Chain connection (see right) Flexible Front Moving end connection Fixed end connection 46 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

46 Number of cable drag chain systems: Quantity Contents of a cable drag chain: Cable type Number of cables in piece count Manufacturer Type Diameter in inch Weight in lbs/ft Min bending radius in inch Cables with fixed plugs or sockets yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no Fiber optic cable Hydraulic Pneumatic Electric Water... Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 47

47 Notes 48 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

48 CABLE DRAG CHAIN PRODUCT RANGE MP 10.1 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

49 MP EasyLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 0.24 inch Radius = 0.71 inch Configuration = 0 Style = 0 Ideal operating conditions easy to fill with EASY mechanism smooth running self-supporting application gliding application Alternative chain type MP 14 / MP 15 greater self-supporting lengths higher torsion and turning rigidity MP MP MP MP MP MP Order number: Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with integrated strain relief ESD cable drag chains for use in ESD areas Cable insertion tool for easy wire insertion in the EasyLine EASY opening mechanism for easy fitting Fixed integrated separator for correctly routing cables 50 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

50 MP EasyLine Technical data Chain link dimensions Loading side: slotted outside flexure curve Material properties Operating temperature: -22 to 248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 6.56 ft Vertical standing travel distance L vs : 3.28 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : 6.56 m/s² self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 21 links each 0.59 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 51

51 MP EasyLine End Brackets End Brackets Bottom Top FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end The chain bracket is a fully plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables and conduits may be fastened with cable ties to the integrated strain relief of the end brackets. 52 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 10.1 - EasyLine End Brackets Dimensions in inch Type A D F G H Ø KA 10.1 006 0.24 0.53 0.31 0.43 0.13 KA 10.1 009 0.35 0.65 0.31 0.43 0.13 KA 10.1 015 0.59 0.89 0.31 0.43 0.13 KA 10.1 021 0.83 1.

26 inch 10.1 009 1 0.37 inch 10.1 015 1 0.61 inch 10.1 021 2 0.37 inch 10.1 031 3 0.37 inch 10.1 041 4 0.35 inch Chamber size Insertion tool Type Order no.

52 MP EasyLine End Brackets Dimensions in inch Type A D F G H Ø KA KA KA KA Type A B D F G H Ø KA KA MP 10.1 chamber size Type Number of chambers Chamber width inch inch inch inch inch inch Chamber size Insertion tool Type Order no. Description Pack KE KE insertion tool 1 The insertion tool allows for fast and easy installation of lines in the opening connectors of the cable drag chain. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 53

53 MP EasyLine Assembly Step 1 Step 2 Disassembly Step 1 Step 2 54 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

54 CABLE DRAG CHAIN PRODUCT RANGE MP 14 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

55 MP 14 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example Inside width = 0.63 inch Radius = 0.98 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the outside flexure curve smooth running self-supporting application gliding application Alternative chain type MP 15 higher torsion and turning rigidity MP 18.2 opening cover in the inside flexure curve MP 18.1/MP 18.2 greater self-supporting lengths MP MP MP MP Order number: Configuration Radii with medium pre-tension (R) for all applications Integrated separator for cable separation Chain bracket with integrated strain relief Crossbars hinged on one side 56 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

56 MP 14 - MultiLine Technical data Chain link dimensions Loading side: outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 6.56 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : 6.56 ft/s² Self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 12 links each 1.02 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 57

57 MP 14 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end The end brackets is a full plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 58 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

58 MP 14 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA Female end KA Male end , KA Female end KA Male end Type A B D F G H Ø KA Female end KA Male end KA Female end KA Male end Separator Type Part number Description Pack TR Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR Separator Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 59

59 MP 14 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 60 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

60 CABLE DRAG CHAIN PRODUCT RANGE MP 15 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

61 MP 15 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 0.63 inch Radius = 0.98 inch Configuration = 0 Style = 0 Ideal operating conditions high torsion and turning rigidity due to closed construction smooth running compact dimensions and high level of sturdiness self-supporting application gliding application Alternative chain type MP 14 Openable cover variant MP 18.1/MP 18.2 greater self-supporting lengths MP MP MP MP Order number: Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Integrated separator for cable separation Chain bracket with integrated strain relief ESD cable drag chains for use in ESD areas 62 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

62 MP 15 - MultiLine Technical data Chain link dimensions Loading side: non-opening Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 6.56 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : 6.56 ft/s² Self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 12 links each 1.02 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 63

63 MP 15 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end The end brackets is a full plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 64 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 15 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA 14016 Female end 0.63 0.94 0.31 0.43 0.13 KA 14016 Male end 0.63 0.94 0.31 0.30 0.13 KA 14020 Female end 0.79 1.10 0.31 0.43 0.13 KA 14020 Male end 0.

64 MP 15 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA Female end KA Male end KA Female end KA Male end Type A B D F G H Ø KA Female end KA Male end KA Female end KA Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 65

65 MP 15 - MultiLine Assembly Step 1 Step 2 Disassembly Step 1 Step 2 66 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

66 CABLE DRAG CHAIN PRODUCT RANGE MP 18.1 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

67 MP MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 0.71 inch Radius = 1.10 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the outside flexure curve smooth running high stability flexible inside layout gliding application self-supporting application rotated 90º self-supporting Alternative chain type MP MP MP MP MP MP 18.2 opening cover in the inside flexure curve MP 2000 easier to use MP 26/MP 3000 greater self-supporting lengths Order number: Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Crossbars hinged on one side Reverse radius combinations Integrated separator for cable separation ESD cable drag chains for use in ESD areas 68 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

68 MP MultiLine Technical data Chain link dimensions Loading side: outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 1.64 ft Gliding speed V g : 6.56 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 10 links each 1.30 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 69

69 MP MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end The end brackets is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order one male and one female connection per chain. Fasten the connections with M5 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 70 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 18.1 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z 18018 Female end 0.72 1.18 0.75 0.41 0.22 KA/Z 18018 Male end 0.72 1.18 0.75 0.33 0.22 KA/Z 18025 Female end 1.00 1.46 0.75 0.41 0.22 KA/Z 18025 Male end 1.

98 1.34 2.44 0.75 0.33 0.22 KA/Z 18070 Female end 2.77 1.89 3.23 0.75 0.41 0.22 KA/Z 18070 Male end 2.77 1.89 3.23 0.75 0.33 0.22 Separator Type Order no.

70 MP MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end Type A B D F G H Ø KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end Separator Type Order no. Description Pack TR 14/ Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR 14/ Separator Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 71

71 MP MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 72 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

72 CABLE DRAG CHAIN PRODUCT RANGE MP 18.2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

73 MP MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 0.71 inch Radius = 1.10 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout self-supporting application rotated 90º self-supporting Alternative chain type MP MP MP MP MP MP 18.1 Opening cover in the outside flexure curve, gliding application MP 2000 easier to use MP 26/MP 3000 greater self-supporting lengths Order number: Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Crossbars hinged on one side Reverse radius combinations Integrated separator for cable separation ESD cable drag chains for use in ESD areas 74 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

74 MP MultiLine Technical data Chain link dimensions Material properties Operating temperature: -22 to +248 C Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Technical specifications Gliding travel distance L g : not recommended Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 1.64 ft Self-supporting speed V f : ft/s Self-supporting acceleration a f : ft/s² Loading side: Inside flexure curve Other material properties on request Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 10 links each 1.30 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 75

75 MP MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end The end brackets is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M5 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 76 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 18.2 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z 18018 Female end 0.72 1.18 0.75 0.41 0.22 KA/Z 18018 Male end 0.72 1.18 0.75 0.33 0.22 KA/Z 18025 Female end 1.00 1.46 0.75 0.41 0.22 KA/Z 18025 Male end 1.

76 MP MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end Type A B D F G H Ø KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end Separator Type Order no. Description Pack TR 14/ Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR 14/ Separator Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 77

77 MP MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 78 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

78 CABLE DRAG CHAIN PRODUCT RANGE MP 2000 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

79 MP MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example Inside width = 0.59 inch Radius = 1.38 inch Configuration = 0 Style = 0 Ideal operating conditions Opening cover in the inside flexure curve smooth running self-supporting application Alternative chain type MP 18.1 gliding application MP 18.1 / MP rotated application MP 26 / MP 3000 greater self-supporting lengths MP2001 MP Order number: Configuration Radii with medium pre-tension (R) for all applications Chain bracket with metal inserts and strain relief Crossbars hinged on one side 80 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 2000 - MultiLine Technical data Chain link dimensions Material properties Operating temperature: -22 to -248 F Gliding friction factor: 0.30 Static friction factor: 0.

80 MP MultiLine Technical data Chain link dimensions Material properties Operating temperature: -22 to -248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Technical specifications Gliding travel distance L g : not recommended Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 3.28 ft Self-supporting speed V f : ft/s Self-supporting acceleration a f : 9.84 ft/s² Loading side: Inside flexure curve Other material properties on request Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still tensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 11 links each 1.10 inch The fixed point connection of the cable drag chain should be at the center of the stroke. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 81

MP 2000 - MultiLine End Brackets End Brackets Up 0 Down 0 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 2001 Female end 020000005000 for inside width 0.

81 MP MultiLine End Brackets End Brackets Up 0 Down 0 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 2001 Female end for inside width 0.59 inch 1 KA 2001 Male end for inside width 0.59 inch 1 KA 2002 Female end for inside width 0.98 inch 1 KA 2002 Male end for inside width 0.98 inch 1 The end brackets is a plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M5 screws. End Brackets Dimensions in inch Type A D G F H Ø P Ø KA KA Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

82 MP MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 83

MP 2000 - MultiLine Assembly Montaje Dismantling Desmontaje 84 Murrplastik Systems, Inc.

83 MP MultiLine Assembly Montaje Dismantling Desmontaje 84 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

84 CABLE DRAG CHAIN PRODUCT RANGE MP 3000 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

85 MP MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 1.02 inch Radius = 1.97 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout rotated 90º self-supporting variant with pre-tension (RV) for high self-supporting lengths variant without pre-tension (RK) for gliding applications MP3001 MP3002 MP MP3003 MP MP3004 MP3005 Order number: Alternative chain type MP 26 greater widths MP 25 G closed series MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Configuration Radii with or without pre-tension (RK/RV) ESD cable drag chains for use in ESD areas ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Reverse radius combinations Crossbars hinged on one side H-shelf for easy cable separation in the cable window Plug-in shelf system for reliable cable feed Integrated separator for cable separation Strain relief bar ZL 86 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

86 MP MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 2.3 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 7 links each 1.77 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 87

87 MP MultiLine Chain connection Chain connection U-part Top Bottom Chain connection angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/outside Top/inside Chain connection U-part Type Order no. Pack KA/Z 3001 Female end for inside width 1.02 inch 1 KA/Z 3001 Male end for inside width 1.02 inch 1 KA/Z 3002 Female end for inside width 1.47 inch 1 KA/Z 3002 Male end for inside width 1.47 inch 1 KA/Z Female end for inside width 2.20 inch 1 KA/Z Male end for inside width 2.20 inch 1 KA/Z 3003 Female end for inside width 2.44 inch 1 KA/Z 3003 Male end for inside width 2.44 inch 1 KA/Z Female end for inside width 2.99 inch 1 KA/Z Male end for inside width 2.99 inch 1 KA/Z 3004 Female end for inside width 3.43 inch 1 KA/Z 3004 Male end for inside width 3.43 inch 1 KA/Z 3005 Female end for inside width 3.98 inch 1 KA/Z 3005 Male end for inside width 3.98 inch 1 The chain connection, type KA/Z , is a full plastic part with extrusioncoated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. The cables or conduits may be fastened with cable ties to the integrated strain relief of the chain connection. 88 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

88 MP MultiLine Chain connection angle Type Order no. Material Pack KA 3008 Female end Steel plate 1 KA 3008 Male end Steel plate 1 KA 3009 Female end Stainless steel KA 3009 Male end Stainless steel Please order 1 piece with boring holes (left bore hole + right bore hole) for each chain, and 1 piece with bolts (left bolt + right bolt). End Brackets U-part Dimensions in inch Type A D G H Ø I KA/Z Type A B D G H Ø I KA/Z KA/Z KA/Z KA/Z KA/Z KA/Z Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 89

MP 3000 - MultiLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 3008 Female end 1.02 1.91 1.73 0.98 0.83 0.26 0.18 KA 3008 Male end 1.02 2.24 1.73 0.98 0.83 0.26 0.18 KA 3008 Female end 1.

89 MP MultiLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end Type A B D F G H Ø I Bottom and top/inside KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end KA 3008 Female end KA 3008 Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

90 MP Accessories Separator Type Order no. Description Pack TR Separator movable 1 TR Separator fixed 1 Lock grid spacing 0.12 inch Separator We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. A fixed separator should be used for side-mounted cable drag chains to avoid slipping of the separator. Dimensions in inch Type TI H H1 H2 TR TR Separator H-shaped shelf unit Type Order no. Description Pack RE RE 2615 H-shaped shelf unit 1 RE RE 2627 H-shaped shelf unit 1 RE RE 2651 H-shaped shelf unit 1 Lock grid spacing 0.12 inch Insert to achieve additional racks in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE RE RE H-shaped shelf unit Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 91

91 MP Accessories Shelving system Type Order no. Description Width Pack in inch RBT RBT 037 Shelf RBT RBT 062 Shelf RBT RBT 086 Shelf RBT RBT 101 Shelf Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 92 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

92 MP MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 93

93 94 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

94 CABLE DRAG CHAIN PRODUCT RANGE MP 26 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

95 MP 26 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example Inside width = 1.02 inch Radius = 1.57 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout rotated 90º self-supporting Alternative chain type MP MP MP MP MP MP MP 3000 version with/without pre-tension MP 25 G enclosed product line MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: Configuration Radii with medium pre-tension (R) for all applications H-shelf for easy cable separation in the cable window Plug-in shelf system for reliable cable feed Strain relief bar ZL Integrated separator for cable separation Chain bracket with metal inserts and strain relief Crossbars hinged on one side 96 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

96 MP 26 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 2.30 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 7 links each 1.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 97

97 MP 26 - MultiLine End Brackets End Brackets Top Bottom FP = Fixed point MP = Moving end point End Brackets Type Order no. for inside width Pack KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end The end brackets, type KA/Z, is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. The cables or conduits may be fastened with cable ties to the integrated strain relief of the end brackets. 98 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 26 - MultiLine End Brackets Dimensions in inch Type A D G H Ø I KA/Z 26026 Female end 1.02 1.73 1.36 0.26 0.71 KA/Z 26026 Male end 1.02 1.73 1.42 0.26 0.71 Type A D G H Ø I KA/Z 26037 Female end 1.

43 3.15 4.13 1.36 0.26 0.73 KA/Z 26087 Male end 3.43 3.15 4.13 1.42 0.26 0.73 KA/Z 26101 Female end 3.98 3.70 4.69 1.36 0.26 0.73 KA/Z 26101 Male end 3.98 3.70 4.69 1.42 0.26 0.73 KA/Z 26125 Female end 4.

98 MP 26 - MultiLine End Brackets Dimensions in inch Type A D G H Ø I KA/Z Female end KA/Z Male end Type A D G H Ø I KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end KA/Z Female end KA/Z Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 99

99 MP 26 - Accessories Separator Type Order no. Description Pack TR Separator movable 1 TR Separator fixed 1 Lock grid spacing 0.12 inch Separator We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. A fixed separator should be used for side-mounted cable drag chains to avoid slipping of the separator. Dimensions in inch Type TI H H1 H2 TR TR Separator H-shaped shelf unit Type Order no. Description Pack RE RE 2615 H-shaped shelf unit 1 RE RE 2627 H-shaped shelf unit 1 RE RE 2632 H-shaped shelf unit 1 RE RE 2651 H-shaped shelf unit 1 Lock grid spacing 0.12 inch H-shaped shelf unit Insert to achieve additional racks in fixed window widths. Dimensions in inch Type WA WI H1 H2 HI RE RE RE RE H-shaped shelf unit 100 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

100 MP 26 - Accessories Shelving system Type Order no. Description Width Pack in inch RB RB 037 Shelf RB RB 062 Shelf RB RB 086 Shelf RB RB 101 Shelf RB RB 125 Shelf Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 101

101 MP 26 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

102 CABLE DRAG CHAIN PRODUCT RANGE MP 32 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

103 MP 32 - PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP32 xxx Inside > ALU * Inside width = 1.77 inch Radius = 3.15 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted Alternative chain type MP 36 G closed series MP 35 Opening cover in the inside flexure curve, easier to use Order number: Configuration Chain bracket with three-sided fixing option Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Radii with medium pre-tension (R) for all applications Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Integrated separator for cable separation Crossbar connectors for securing big frame ridge widths Reverse radius combinations 104 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

104 MP 32 - PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 5 links each 2.54 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 105

105 MP 32 - PowerLine End Brackets End Brackets Flexible FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 32-F This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Every chain requires 2 end brackets. The connections are fastened with M5 screws. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 106 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 32 - PowerLine End Brackets Dimensions in inch Type A D E F F1 G G1 H Ø KA 32-F 1.77 2.80 2.32 0.89 0.87 2.28 3.66 0.22 KA 32-F 2.44 3.46 2.99 0.89 0.87 2.28 3.66 0.22 KA 32-F 2.80 3.82 3.35 0.

106 MP 32 - PowerLine End Brackets Dimensions in inch Type A D E F F1 G G1 H Ø KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F KA 32-F Variable A+1.02 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 107

107 MP 32 - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.22 inch We recoinchend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE RE 3235 H-shaped shelf unit 1 RE RE 3252 H-shaped shelf unit 1 RE RE 3275 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert to achieve additional racks in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE RE RE H-shaped shelf unit 108 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

108 MP 32 - Accessories Shelving system Type Order no. Description Width Pack in inch Shelving system RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf RB RB 218 Shelf RTA RTA 32 Shelf support, outside, including pin 1 RTI RTI 32 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RTI/RTA), constitutes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelving supports must be placed at the inside center of the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 109

109 MP 32 - Accessories Crossbar connector Type Order no. Description Pack RSV RSV 32 Crossbar connector 1 RSV 32 A RSV 32 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. Description Pack Strain relief RS-ZL RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 RS-ZL RS-ZL Frame ridge with strain relief 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 110 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

110 MP 32 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 32 (RÜ200/R120) inch 7.87 inch 1 SR 32 (RÜ200/R135) inch 7.87 inch 1 SR 32 (RÜ200/R150) inch 7.87 inch 1 SR 32 (RÜ200/R170) inch 7.87 inch 1 SR 32 (RÜ200/R200) inch 7.87 inch 1 SR 32 (RÜ200/R250) inch 7.87 inch 1 Turning movement Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 111

111 MP 32 - PowerLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

112 CABLE DRAG CHAIN PRODUCT RANGE MP 35 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

113 MP 35 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias Style: 0 Standard (PA) 9 Special version Order example Inside width = 2.44 inch Radius = 2.76 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation rotated 90º self-supporting variant with pre-tension (RV) for high self-supporting lengths variant without pre-tension (RK) for gliding applications Alternative chain type MP MP MP MP MP MP 36 G closed series MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: Configuration Chain bracket with variably placed metal angle Removable crossbars on one side Radii with or without pre-tension (RK/RV) Plug-in shelf system for reliable cable feed Reverse radius combinations Strain relief bar ZL H-shelf for easy cable separation in the cable window Chain bracket metal clamp Integrated separator for cable separation 114 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

114 MP 35 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch and less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 6 links each 2.28 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 115

115 MP 35 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/Outside Top/Inside End Brackets U-part Type Order no. Material Pack KA Female end Steel plate 1 KA Male end Steel plate 1 KA Female end Steel plate 1 KA Male end Steel plate 1 KA Female end Steel plate 1 KA Male end Steel plate 1 KA Female end Steel plate 1 KA Male end Steel plate 1 KA Female end Steel plate 1 KA Male end Steel plate 1 KA Female end Stainless steel KA Male end Stainless steel KA Female end Stainless steel KA Male end Stainless steel KA Female end Stainless steel KA Male end Stainless steel KA Female end Stainless steel KA Male end Stainless steel KA Female end Stainless steel KA Male end Stainless steel The metal connection (U-part) is exactly suited to the individual chain width. It only needs to be snapped-in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. 116 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

116 MP 35 - MultiLine End Brackets angle Type Order no. Material Pack KA 3508 Female end Steel plate 1 KA 3508 Male end Steel plate 1 KA 3509 Female end Stainless steel KA 3509 Male end Stainless steel Please order 1 male end and 1 female end per chain. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 117

MP 35 - MultiLine End Brackets U-part Dimensions in inch Type A B D F G H Ø I KA 35062 2.44 2.11 3.23 0.98 0.79 0.28 0.59 KA 35086 3.39 3.05 4.17 0.98 0.79 0.28 0.59 KA 35102 4.02 3.68 4.80 0.98 0.79 0.28 0.59 KA 35125 4.

44 3.96 3.86 0.98 0.79 0.28 0.31 KA 3508/09 Female end 3.39 4.49 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Male end 3.39 4.90 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Female end 4.02 5.12 5.43 0.98 0.79 0.28 0.31 KA 3508/09 Male end 4.

117 MP 35 - MultiLine End Brackets U-part Dimensions in inch Type A B D F G H Ø I KA KA KA KA KA End Brackets angle Dimensions in inch Type A C D F G H Ø I Outside angle KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end Type A C D F G H Ø I Inside angle KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end KA 3508/09 Female end KA 3508/09 Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

118 MP 35 - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.12 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI H TR Separator H-shaped shelf unit Type Order no. Description Pack RE RE 3533 H-shaped shelf unit 1 RE RE 3548 H-shaped shelf unit 1 RE RE 3557 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE RE RE Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 119

119 MP 35 - Accessories Shelving system Type Order no. Description Width in inch Pack RBT RBT 062 Shelf RBT RBT 086 Shelf RBT RBT 101 Shelf RBT RBT 125 Shelf RBT RBT 150 Shelf Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 120 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

120 MP 35 - MultiLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 121

121 MP 35 - MultiLine Assembly Dismantling 122 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

122 CABLE DRAG CHAIN PRODUCT RANGE MP 44 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

123 MP 44 - MultiLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0* crossbar every link; w/bias 1* crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example *00 Inside width = 1.77 inch Radius = 3.54 inch Configuration = 0* Style = 0 MP MP MP MP MP MP MP44 xxx Inside > ALU * 1* Ideal operating conditions opening cover both sides flexible internal separation variable widths due to aluminum crossbars gliding application self-supporting application smooth running Alternative chain type MP 43 G closed series MP 41 higher loads flange connection (KA-F) reverse radii Order number: Configuration Chain bracket with variably placed metal angle Strain relief bar ZL Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Aluminum frame ridge with integrated lock grid in various lengths Plug-in shelf system for reliable cable feed 124 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

124 MP 44 - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 2.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 125

125 MP 44 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/Outside Top/Inside End Brackets U-part Type Order no. Pack KA 44 U This end brackets is delivered as standard for a width of 45 inch. Assembly can be up or down. End Brackets angle Type Order no. Material Pack KA Steel plate 1 KA Stainless steel There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 126 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 44 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 44 U 1.77 3.07 1.10 1.77 0.26 0.33 1.30 End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 44 2.44 3.96 3.

126 MP 44 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 44 U End Brackets angle Dimensions in inch Type A C D F G H Ø I KA KA KA KA KA KA 44 Variable A+1.52 A Bottom and top/outside Type A B D F G H Ø I KA KA KA KA KA KA 44 Variable A+0.57 A Bottom and top/inside Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 127

127 MP 44 - Accessories Separator Type Order no. Description Pack TF Separator 1 TL Separator for aluminum crossbars 1 Lock grid spacing 0.22 inch Separator We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. When using aluminum crossbars or moveable separators, the TL 44 should be used. Dimensions in inch Type TI H H1 H2 H3 HI TF ,57 TL ,57 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf RT RT 44 Shelf support 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT Shelving system 128 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

128 MP 44 - Accessories Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 129

129 MP 44 - MultiLine 130 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

130 CABLE DRAG CHAIN PRODUCT RANGE MP 42 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

131 MP 42 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example Inside width = 2.76 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve flexible internal separation rotated 90º self-supporting gliding application self-supporting application Alternative chain type MP MP MP MP MP MP MP 43 G closed series MP 41 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: Configuration Chain bracket with three-sided fixing option H-shelf for easy cable separation in the cable window Chain bracket with variably placed metal angle Removable crossbars on one side Ridge frame strain relief can be integrated in the chain connection Radii with medium pre-tension (R) for all applications Hinged shelf system for reliable cable feed 132 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

132 MP 42 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 133

MP 42 - MultiLine End Brackets End Brackets flexible Flexible End Brackets angle Front/outside Top/outside Bottom/outside FP = Fixed point MP = Moving end point Front/inside Top/inside Bottom/inside

133 MP 42 - MultiLine End Brackets End Brackets flexible Flexible End Brackets angle Front/outside Top/outside Bottom/outside FP = Fixed point MP = Moving end point Front/inside Top/inside Bottom/inside End Brackets flexible Type Order no. Pack KA F Female end KA F Male end KA F Female end KA F Male end KA F Female end KA F Male end KA F Female end KA F Male end KA F Female end KA F Male end KA F Female end KA F Male end This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 134 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

134 MP 42 - MultiLine End Brackets angle Type Order no. Pack KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø KA F KA F KA F KA F KA F KA F Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 135

MP 42 - MultiLine End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 42070 2.76 3.84 3.78 1.38 4.92 0.26 0.67 KA 42090 3.54 4.63 4.57 1.38 4.92 0.26 0.67 KA 42115 4.53 5.61 5.55 1.38 4.92 0.26 0.67 KA 42150 5.

135 MP 42 - MultiLine End Brackets angle Dimensions in inch Type A C D F G H Ø I KA KA KA KA KA KA Front/outside Type A B D F G H Ø I KA KA KA KA KA KA , Front/inside Type A C D F G H Ø I KA KA KA KA KA KA Bottom and top/outside Type A B D F G H Ø I KA KA KA KA KA KA Bottom and top/inside 136 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

136 MP 42 - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE 36/ RE 36/11 H-shaped shelf unit 1 RE 59/ RE 59/18 H-shaped shelf unit 1 RE 81/ RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/ RE 59/ RE 81/ H-shaped shelf unit Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 137

137 MP 42 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf RB RB 218 Shelf RTA RTA 41 Shelf support, outside, including pin 1 RTI RTI 41 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RTI/RTA), constitutes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelf supports must be placed centrally inside the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 8.86 inch. May be assembled on the inside and outside flexure curves at both chain endings. 138 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 42 - Accessories Assembly The high-load capacity

entire chain length in a side panel and then fixed into the

Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the

First pry the crossbars out of the side panel on one side

138 MP 42 - Accessories Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 139

139 MP 42 - MultiLine 140 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

140 CABLE DRAG CHAIN PRODUCT RANGE MP 41 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

141 MP 41 - PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP41 xxx Inside > ALU * Inside width = 1.77 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted Alternative chain type MP 43 G closed series MP 42 easier to use MP 44 Version with/without pre-tension, easier to use MP 41.2 easier assembly Order number: Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Aluminum frame ridge with integrated lock grid in various lengths Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Radii with medium pre-tension (R) for all applications 142 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

142 MP 41 - PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 143

143 MP 41 - PowerLine Chain connection Chain connection flexible Chain connection angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside Chain connection flexible Type Order no. Version Pack KA 41-FB with bushing 1 KA 41-FG with thread 1 This chain connection provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 144 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

144 MP 41 - PowerLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB Variable A+1.34 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB Variable A+1.34 A M6 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 145

145 MP 41 - PowerLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A+1.36 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 41 - PowerLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 41 1.77 3.13 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 4.15 4.06 1.

146 MP 41 - PowerLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A+1.36 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 147

147 MP 41 - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE 36/ RE 36/11 H-shaped shelf unit 1 RE 59/ RE 59/18 H-shaped shelf unit 1 RE 81/ RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/ RE 59/ RE 81/ H-shaped shelf unit 148 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

148 MP 41 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf RB RB 218 Shelf RTA RTA 41 Shelf support, outside, including pin 1 RTI RTI 41 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf with at least two shelf supports (RTI/RTA) is a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelf supports must be placed centrally inside the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 149

149 MP 41 - Accessories Crossbar connector Type Order no. Description Pack RSV RSV 41 Crossbar connector 1 RSV 41 A RSV 41 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Fixed integrated frame ridge strain relief in the chain connections. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 150 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

150 MP 41 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the chain connections. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 41 (RÜ200/R125) inch 7.87 inch 1 SR 41 (RÜ200/R160) inch 7.87inch 1 SR 41 (RÜ200/R175) inch 7.87inch 1 SR 41 (RÜ200/R200) inch 7.87inch 1 SR 41 (RÜ200/R250) inch 7.87inch 1 SR 41 (RÜ200/R300) inch 7.87inch 1 SR 41 (RÜ200/R350) inch 7.87inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered chain connections. Lowered chain connection Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 151

151 MP 41 - PowerLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

152 CABLE DRAG CHAIN PRODUCT RANGE MP 41.2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

153 MP PowerLine, 2nd generation Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Configuration: 0 crossbar every link; w/bias 2 crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Inside width (part number code) in inch Outside width in inch Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP41.2 xxx Order number: Inside > ALU Inside width = 1.77 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation Alternative chain type MP 43 G closed series MP 42 Opening cover in the inside flexure curve, easier to use MP 44 Version with/without pre-tension, easier to use MP 41 greater self-supporting length Configuration Chain bracket with three-sided fixing option Chain bracket with variably placed metal angle Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 154 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

154 MP PowerLine, 2nd generation Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 155

155 MP PowerLine, 2nd generation End Brackets End Brackets flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 41-FB with bushing 1 KA 41-FG with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. 156 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

156 MP PowerLine, 2nd generation End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB KA 41-FB Variable A+1.34 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB M6 KA 41-FB Variable A+1.34 A M6 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 157

MP 41.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 41 1.77 3.13 3.03 1.26 3.11 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 3.11 0.26 0.55 KA 41 2.80 4.

157 MP PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A+1.36 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 41.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 41 1.77 3.13 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 4.

158 MP PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A+1.36 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 41 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 159

159 MP Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type H TI H1 H2 H3 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE 36/ RE 36/11 H-shaped shelf unit 1 RE 59/ RE 59/18 H-shaped shelf unit 1 RE 81/ RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/ RE 59/ RE 81/ H-shaped shelf unit 160 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

160 MP Accessories Shelving system Type Order no. Description Width in inch Pack RB RB Shelf RTT RTT 41 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT Shelving system Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 161

161 MP Accessories Crossbar connector Type Order no. Description Pack RSV RSV 41 Crossbar connector 1 RSV 41 A RSV 41 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Fixed integrated frame ridge strain relief in the end Brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 162 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

162 MP Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 41.2 (RÜ200/R125) inch 7.87 inch 1 SR 41.2 (RÜ200/R160) inch 7.87 inch 1 SR 41.2 (RÜ200/R175) inch 7.87 inch 1 SR 41.2 (RÜ200/R200) inch 7.87 inch 1 SR 41.2 (RÜ200/R250) inch 7.87 inch 1 SR 41.2 (RÜ200/R300) inch 7.87 inch 1 SR 41.2 (RÜ200/R350) inch 7.87 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 163

MP 41.2 - PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting.

The transfer of force is performed exclusively via the holes on the frame ridge end/side link.

163 MP PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

164 CABLE DRAG CHAIN PRODUCT RANGE MP 52.1 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

165 MP PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP52.1 xxx Inside > ALU * 3* Order example Inside width = 1.77 inch Radius = 3.94 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 52.2 easier assembly Order number: Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the chain connection Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) 166 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

166 MP PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 9.84 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.58 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 167

167 MP PowerLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 52.1-FB Female end with bushing 1 KA 52.1-FB Male end with bushing 1 KA 52.1-FG Female end with thread 1 KA 52.1-FG Male end with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 52.1 Female end KA 52.1 Male end There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. 168 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

168 MP PowerLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB Variable A+1.42 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB Variable A+1.42 A M8 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 169

169 MP PowerLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A+1.36 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

170 MP PowerLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A+1.36 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 171

171 MP Accessories Separator Type Order no. Description Pack TR TR 52.1 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE 36/ RE 36/17 H-shaped shelf unit 1 RE 59/ RE 59/24 H-shaped shelf unit 1 RE 81/ RE 81/12 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/ RE 59/ RE 81/ H-shaped shelf unit 172 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

172 MP Accessories Shelving system Type Order no. Description Width in inch Pack RB RB Shelf RTT RTT 52 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT Shelving system Crossbar connector Type Order no. Description Pack RSV RSV 52 Crossbar connector 1 RSV 52 A RSV 52 Aluminum crossbar connector 1 For crossbars wider than 246 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 173

173 MP Accessories Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 246 inch. May be assembled on the inside and outside flexure curves at both chain endings. Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. 174 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

174 MP Accessories Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 52.1 (RÜ200/R135) left inch 7.87 inch 1 SR 52.1 (RÜ200/R135) right inch 7.87 inch 1 SR 52.1 (RÜ200/R170) left inch 7.87 inch 1 SR 52.1 (RÜ200/R170) right inch 7.87 inch 1 SR 52.1 (RÜ200/R200) left inch 7.87 inch 1 SR 52.1 (RÜ200/R200) right inch 7.87 inch 1 SR 52.1 (RÜ200/R250) left inch 7.87 inch 1 SR 52.1 (RÜ200/R250) right inch 7.87 inch 1 SR 52.1 (RÜ200/R300) left inch 7.87 inch 1 SR 52.1 (RÜ200/R300) right inch 7.87 inch 1 SR 52.1 (RÜ200/R350) left inch 7.87 inch 1 SR 52.1 (RÜ200/R350) right inch 7.87 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 175

175 MP PowerLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Please note that only side links with the same marking will fit together. This also concerns the end bracketss. The high loading capacity of the connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

176 CABLE DRAG CHAIN PRODUCT RANGE MP 52.2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

177 MP PowerLine, 2nd generation Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP Inside > ALU Order example Inside width = 1.77 inch Radius = 3.94 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 52.1 greater self-supporting length Order number: Configuration Chain bracket with three-sided fixing option Radii with or without pre-tension (RK/RV) Chain bracket with variably placed metal angle ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 178 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

178 MP PowerLine, 2nd generation Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.58 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 179

179 MP PowerLine, 2nd generation End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 52.1-FB Female end with bushing 1 KA 52.1-FB Male end with bushing 1 KA 52.1-FG Female end with thread 1 KA 52.1-FG Male end with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 52.1 Female end KA 52.1 Male end This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. 180 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 52.2 - PowerLine, 2nd generation End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 52.1-FB 1.77 3.19 2.40 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 2.44 3.

180 MP PowerLine, 2nd generation End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB KA 52.1-FB Variable A+1.42 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB M8 KA 52.1-FB Variable A+1.42 A M8 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 181

MP 52.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 52.1 1.77 3.13 3.03 1.26 3.76 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 3.76 0.26 0.55 KA 52.1 2.80 4.

181 MP PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A+1.36 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 52.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 52.1 1.77 3.13 3.03 1.26 5.87 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 5.87 0.26 0.55 KA 52.1 2.80 4.

182 MP PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A+1.36 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 52.1 Variable A-0.10 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 183

183 MP Accessories Separator Type Order no. Description Pack TR TR 52.1 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE 36/ RE 36/17 H-shaped shelf unit 1 RE 59/ RE 59/24 H-shaped shelf unit 1 RE 81/ RE 81/12 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/ RE 59/ RE 81/ H-shaped shelf unit 184 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

184 MP Accessories Shelving system Type Order no. Description Width in inch Pack RB RB Shelf RTT RTT 52.1 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT Shelving system Crossbar connector Type Order no. Description Pack RSV RSV 52 Crossbar connector 1 RSV 52 A RSV 52 Aluminum crossbar connector 1 For crossbars wider than 246 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 185

185 MP Accessories Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. 186 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

186 MP Accessories Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 52.2 (RÜ200/R135) left inch 7.87 inch 1 SR 52.2 (RÜ200/R135) right inch 7.87inch 1 SR 52.2 (RÜ200/R170) left inch 7.87inch 1 SR 52.2 (RÜ200/R170) right inch 7.87inch 1 SR 52.2 (RÜ200/R200) left inch 7.87inch 1 SR 52.2 (RÜ200/R200) right inch 7.87inch 1 SR 52.2 (RÜ200/R250) left inch 7.87inch 1 SR 52.2 (RÜ200/R250) right inch 7.87inch 1 SR 52.2 (RÜ200/R300) left inch 7.87inch 1 SR 52.2 (RÜ200/R300) right inch 7.87inch 1 SR 52.2 (RÜ200/R350) left inch 7.87inch 1 SR 52.2 (RÜ200/R350) right inch 7.87inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 187

MP 52.2 - PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting.

187 MP PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

188 CABLE DRAG CHAIN PRODUCT RANGE MP 66 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

189 MP 66 - MultiLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0* crossbar every link; w/bias 1* crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example *00 Inside width = 1.77 inch Radius = 5.91 inch Configuration = 0* Style = 0 MP MP MP MP MP MP MP66 xxx Inside > ALU * 1* Ideal operating conditions opening cover both sides flexible internal separation variable widths (aluminum frame ridge) gliding application self-supporting application smooth running Alternative chain type MP 65 G closed series MP 62.1/MP 62.2 higher loads flange connection (KA-F) Order number: Configuration Chain bracket with variably placed metal angle Strain relief bar ZL Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Aluminum frame ridge with integrated lock grid in various lengths Plug-in shelf system for reliable cable feed 190 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

190 MP 66 - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.60 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 191

191 MP 66 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/outside Top/inside End Brackets U-part Type Order no. Pack KA 66 U This end brackets is delivered as standard for a width of 45 inch. Assembly can be up or down. End Brackets angle Type Order no. Material Pack KA Steel plate 1 KA Stainless steel There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M8 screws. 192 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 66 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 66 U 1.77 3.11 1.10 2.30 0.26 0.33 1.30 U-part End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 66 2.44 4.

01 A+1.34 1.77 1.99 0.35 0.39 Bottom and top/outside Type A B D F G H Ø I KA 66 2.44 1.77 3.78 1.77 1.99 0.35 0.39 KA 66 3.31 2.64 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 3.46 5.47 1.77 1.99 0.35 0.39 KA 66 5.

192 MP 66 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 66 U U-part End Brackets angle Dimensions in inch Type A C D F G H Ø I KA KA KA KA KA KA 66 Variable A+2.01 A Bottom and top/outside Type A B D F G H Ø I KA KA KA KA KA KA 66 Variable A-0.67 A Bottom and top/inside Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 193

193 MP 66 - Accessories Separator Type Order no. Description Pack TV Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TV Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf RT RT 66 Shelf support, including pin 1 Lock grid spacing 0.06 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT Shelving system 194 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

194 MP 66 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius SR 66 (RÜ240/R150) inch 9.45 inch 1 SR 66 (RÜ240/R200) inch 9.45 inch 1 SR 66 (RÜ240/R240) inch 9.45 inch 1 SR 66 (RÜ240/R280) inch 9.45 inch 1 SR 66 (RÜ240/R350) inch 9.45 inch 1 Turning movement Side links with forward radius (R - by radius disk) and reverse radius (Rü - side link specified) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 195

195 MP 66 - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

196 CABLE DRAG CHAIN PRODUCT RANGE MP 62.1 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

197 MP HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP 62.1 xxx Inside > ALU * 3* Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/ side mounted Alternative chain type MP 65 G closed series MP 66 easier to use MP 62.2 easier assembly Order number: Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the Chain bracket Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) 198 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

198 MP HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: VDE 0304 IIC; UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 19,69 ft Rotated 90 self-supporting L 90f : ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 199

199 MP HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Pack KA 62-FB Female end with bushing 1 KA 62-FB Male end with bushing 1 KA 62-FG Female end with thread 1 KA 62-FG Male end with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 62 Female end KA 62 Male end There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M8 screws. 200 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

200 MP HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB Variable A+1.26 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB Variable A+1.26 A M8 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 201

201 MP HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A+1.73 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A-0.47 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

202 MP HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A+1.73 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A-0.47 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 203

203 MP Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RTT RTT 62 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT Shelving system 204 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

204 MP Accessories Crossbar connector Type Order no. Description Pack RSV RSV 62 Crossbar connector 1 RSV 62 A RSV 62 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 205

205 MP Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 62.1 (RÜ300/R300) left inch inch 1 SR 62.1 (RÜ300/R300) right inch inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 206 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

206 MP Accessories Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Please note that only side links with the same marking will fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in one side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 207

MP 62.1 - HeavyLine 208 Murrplastik Systems, Inc.

207 MP HeavyLine 208 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

208 CABLE DRAG CHAIN PRODUCT RANGE MP 62.2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

209 MP HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP 62.2 xxx Inside > ALU * 3* Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 62.1 greater self-supporting length Order number: Configuration Chain bracket with three-sided fixing option Radii with or without pre-tension (RK/RV) Chain bracket with variably placed metal angle ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 210 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

210 MP HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: VDE 0304 IIC; UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 211

211 MP HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 62-FB Female end with bushing 1 KA 62-FB Male end with bushing 1 KA 62-FG Female end with thread 1 KA 62-FG Male end with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 62 Female end KA 62 Male end This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 212 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

212 MP HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 62-FB 4, KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB KA 62-FB Variable A+1.26 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 62-FB 4, M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB M8 KA 62-FB Variable A+1.26 A M8 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 213

213 MP HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A+1.73 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A-0.47 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

214 MP HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A+1.73 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 62 Variable A-0.47 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 215

215 MP Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RTT RTT 62 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT Shelving system 216 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

216 MP Accessories Crossbar connector Type Order no. Description Pack RSV RSV 62 Crossbar connector 1 RSV 62 A RSV 62 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Crossbar connector Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 217

217 MP Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 62.2 (RÜ300/R300) left inch inch 1 SR 62.2 (RÜ300/R300) right inch inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 218 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 62.2 - Accessories Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting.

218 MP Accessories Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 219

MP 62.2 - HeavyLine 220 Murrplastik Systems, Inc.

219 MP HeavyLine 220 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

220 CABLE DRAG CHAIN PRODUCT RANGE MP 72 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

MP 72 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in

221 MP 72 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP 72 xxx Inside > ALU * extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/ side mounted Alternative chain type MP 62.2/MP 82.2 easier assembly Order number: Configuration Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Crossbar connectors for securing big frame ridge widths Radii with or without pre-tension (RK/RV) Reverse radius combinations 222 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

222 MP 72 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 223

223 MP 72 - HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Pack KA 72-F Female end KA 72-F Male end This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M10 screws for connecting. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. End Brackets angle Type Order no. Pack KA 72 Female end KA 72 Male end There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M8 screws. 224 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

224 MP 72 - HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible KA 72-F 4, KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F KA 72-F Variable A+1.26 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 225

MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 72 4.65 6.54 5.91 1.77 4.17 0.35 1.26 KA 72 5.63 7.52 6.89 1.77 4.17 0.35 1.26 KA 72 6.61 8.50 7.

225 MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 72 Variable A+1.89 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 72 Variable A+0.94 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 72 4.65 6.54 5.91 1.77 7.07 0.35 1.26 KA 72 5.63 7.52 6.89 1.77 7.07 0.35 1.26 KA 72 6.61 8.50 7.87 1.

226 MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 72 Variable A+1.89 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 72 Variable A+0.94 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 227

227 MP 72 - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 HI TR Separator H-shaped shelf unit Type Order no. Description Pack RE RE 75/24 H-shaped shelf unit 1 RE RE 75/36 H-shaped shelf unit 1 Lock grid spacing 0.20 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE RE H-shaped shelf unit 228 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

228 MP 72 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RTT RTT 72 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT Shelving system Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 229

229 MP 72 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Crossbar connector Type Order no. Description Pack RSV RSV 72 Crossbar connector 1 RSV RSV 72 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type Size TI Dimensions in inch RSV Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

230 MP 72 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius SR 72 (RÜ300/R300) left inch inch 1 SR 72 (RÜ300/R300) right inch inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 231

MP 72 - HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right

Only the side links with the same designation fit together. This also concerns the end brackets.

Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed

First pry the crossbars out of the side panel on one side and then on the opposite side.

231 MP 72 - HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Only the side links with the same designation fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

232 CABLE DRAG CHAIN PRODUCT RANGE MP 82.2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

233 MP HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP 82.2 xxx Inside > ALU * 3* Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Order number: Configuration Chain bracket with three-sided fixing option ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Radii with or without pre-tension (RK/RV) 234 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

234 MP HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 9.84 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 4.65 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 235

235 MP HeavyLine End Brackets End Brackets flexible Flexible FP = Fixed point MP = Moving end point End Brackets flexible Type Order no. Version Pack KA 82-FB Female end with bushing 1 KA 82-FB Male end with bushing 1 KA 82-FG Female end with thread 1 KA 82-FG Male end with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M10 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. 236 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

236 MP HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB KA 82-FB Variable A+1.77 A Type A D E F F1 G G1 H Flexible with threaded bushing KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB M10 KA 82-FB Variable A+1.77 A M10 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 237

237 MP Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 H6 H7 HI TR Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RTT RTT 82 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT Shelving system 238 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

238 MP Accessories Crossbar connector Type Order no. Description Pack RSV RSV 82 Crossbar connector 1 RSV 82 A RSV 82 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 239

239 MP Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 82.2 (RÜ300/R300) left inch inch 1 SR 82.2 (RÜ300/R300) right inch inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 240 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Pressing in the frame ridge locking ensures the ridges hold securely.

240 MP HeavyLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 Step 5 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 241

MP 82.2 - HeavyLine 242 Murrplastik Systems, Inc.

241 MP HeavyLine 242 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

242 CABLE DRAG CHAIN PRODUCT RANGE MP 102 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

243 MP HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example Inside width = 4.65 inch Radius = 9.84 inch Configuration = 0 Style = 0 Ideal operating conditions MP MP MP MP MP MP MP MP MP MP MP MP MP MP MP102 xxx Inside > ALU * extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation rotated 90º self-supporting/side mounted version with/without pre-tension Order number: Configuration Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the Chain bracket Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Reverse radius combinations 244 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

244 MP HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 2 links each 5.55 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 245

245 MP HeavyLine End Brackets End Brackets Top/outside Front/outside Bottom/outside Top/inside Front/inside Bottom/inside FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 102 Female end KA 102 Male end There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M12 screws. 246 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 102 - HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 102 4.65 6.14 6.46 1.97 9.29 0.51 0.98 KA 102 5.63 7.13 7.44 1.97 9.29 0.51 0.98 KA 102 6.61 8.11 8.

54 13.03 13.35 1.97 9.29 0.51 0.98 KA 102 12.52 14.02 14.33 1.97 9.29 0.51 0.98 KA 102 13.50 15.00 15.31 1.97 9.29 0.51 0.98 KA 102 14.49 15.98 16.30 1.97 9.29 0.51 0.98 KA 102 16.46 17.95 18.27 1.

246 MP HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 102 Variable A+1.50 A Type A B D F G H Ø I Bottom and top/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 102 Variable A+0.08 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 247

MP 102 - HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Front/outside KA 102 4.65 6.14 6.46 1.97 7.38 0.51 0.98 KA 102 5.63 7.13 7.44 1.97 7.38 0.51 0.98 KA 102 6.61 8.11 8.43 1.97 7.38 0.51 0.98 KA 102 7.

52 14.02 14.33 1.97 7.38 0.51 0.98 KA 102 13.50 15.00 15.31 1.97 7.38 0.51 0.98 KA 102 14.49 15.98 16.30 1.97 7.38 0.51 0.98 KA 102 16.46 17.95 18.27 1.97 7.38 0.51 0.98 KA 102 18.43 19.92 19.25 1.

247 MP HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Front/outside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 102 Variable A+1.50 A Type A B D F G H Ø I Front/inside KA KA KA KA KA KA KA KA KA KA KA KA KA KA KA 102 Variable A+0.08 A Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

248 MP Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 5.00 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 H6 HI TR Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB RB Shelf 56 1 RB RB Shelf 66 1 RB RB Shelf 81 1 RB RB Shelf RB RB Shelf RB RB Shelf RB RB Shelf RTT RTT 102 Shelf support, separable 1 Lock grid spacing 5.00 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT Shelving system Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 249

249 MP Accessories Crossbar connector Type Order no. Description Pack RSV RSV 102 Crossbar connector 1 RSV 102 A RSV 102 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 RS-ZL inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. 250 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

250 MP Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail C-profile rail 1 BAK BAK 14 Hooped clamp BAK BAK 18 Hooped clamp BAK BAK 22 Hooped clamp BAK BAK 26 Hooped clamp BAK BAK 30 Hooped clamp BAK 14/ BAK 14/2 Hooped clamp BAK 18/ BAK 18/2 Hooped clamp BAK 22/ BAK 22/2 Hooped clamp BAK 26/ BAK 26/2 Hooped clamp BAK 12/ BAK 12/3 Hooped clamp BAK 14/ BAK 14/3 Hooped clamp BAK 16/ BAK 16/3 Hooped clamp BAK 18/ BAK 18/3 Hooped clamp BAK 20/ BAK 20/3 Hooped clamp BAK 22/ BAK 22/3 Hooped clamp Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 102 (RÜ400/R400) left inch inch 1 SR 102 (RÜ400/R400) right inch inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 251

MP 102 - HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links

2 for the opposite side during assembly.

fit. Therefore, the crossbars are first fixed throughout the entire chain length in a

Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly.

251 MP HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R250.1 for one side and R250.2 for the opposite side during assembly. Only the side links with the same designation fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

252 CABLE DRAG CHAIN PRODUCT RANGE MP 25 G Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 253

253 MP 25 G - SafeLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example Inside width = 1.02 inch Radius = 2.36 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation Alternative chain type MP 3000/MP 26 open version MP 36 G flange connection MP MP MP MP MP MP Order number: Configuration Openable cover for closed cable drag chains Radii with medium pre-tension (R) for all applications Integrated separator for cable separation Strain relief bar ZL Chain bracket metal clamp 254 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

254 MP 25 G - SafeLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 11 links each 1.18 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 255

255 MP 25 G - SafeLine End Brackets End Brackets Top Bottom FP = Fixed point MP = Moving end point End Brackets Type Order no. Material Pack KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Stainless steel KA Stainless steel KA Stainless steel KA Stainless steel KA Stainless steel KA Stainless steel A cable drag chain requires 2 end brackets. The U-part connection offers 2 different fastening options. Type A B D G H Ø I KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

256 MP 25 G - SafeLine Separator Type Order no. Description Pack TR 25G Separator 1 Lock grid spacing 0.10 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 TR 25G Separator Shelving system Type Order no. Description Width in inch Pack RBT RBT 037 Shelf RBT RBT 062 Shelf RBT RBT 086 Shelf RBT RBT 101 Shelf RBT RBT 125 Shelf Lock grid spacing 0.10 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 257

257 MP 25 G - Accessories Assembly The covers overlap when the cable drag chains are closed. Opening the chain can only start from the end of the chain. Step 1 Step 2 Disassembly Step 1 Step Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

258 CABLE DRAG CHAIN PRODUCT RANGE MP 36 G Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 259

259 MP 36 G - SafeLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example Inside width = 2.44 inch Radius = 3.15 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation Alternative chain type MP 35 open version MP MP MP MP Order number: Configuration Openable cover for closed cable drag chains Strain relief bar ZL Radii with medium pre-tension (R) for all applications End brackets metal clamp Integrated separator for cable separation Flange connection for closed cable drag chains Plug-in shelf system for reliable cable feed 260 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

260 MP 36 G - SafeLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 8 links each 1.57 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety (S) Installation height (H S ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 261

261 MP 36 G - SafeLine End Brackets End Brackets U-part Top Bottom End Brackets flange FP = Fixed point MP = Moving end point End Brackets U-part Type Order no. Material Pack KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Steel plate 1 KA Stainless steel KA Stainless steel KA Stainless steel KA Stainless steel A cable drag chain requires 2 end brackets. The U-part connection offers 2 different fastening options. End Brackets flange Type Order no. Material Pack FL Steel plate 1 FL Steel plate 1 FL Steel plate 1 FL Steel plate 1 FL Stainless steel FL Stainless steel FL Stainless steel FL Stainless steel A cable drag chain requires 2 end brackets. The flange connection is divisible for commissioning and retrofitting. Thus, the chain remains in the installed position. 262 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 36 G - SafeLine End Brackets U-part Dimensions in inch Type A B D G H Ø I KA 36062 Female end 2.44 2.12 3.19 2.19 0.26 0.59 KA 36062 Male end 2.44 2.12 3.19 2.52 0.26 0.59 KA 36086 Female end 3.

262 MP 36 G - SafeLine End Brackets U-part Dimensions in inch Type A B D G H Ø I KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end KA Female end KA Male end End Brackets flange Dimensions in inch Type A D G H Ø K L M N FL Female end FL Male end FL Female end FL Male end FL Female end FL Male end FL Female end FL Male end Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 263

263 MP 36 G - Accessories Separator Type Order no. Description Pack TR 36G Separator 1 Lock grid spacing 0.10 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR 36G Separator Shelving system Type Order no. Description Width in inch Pack RB RB 062 Shelf RB RB 086 Shelf RB RB 101 Shelf RB RB 125 Shelf Lock grid spacing 0.10 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 264 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

264 MP 36 G - SafeLine Assembly The covers overlap when the cable drag chains are closed. Opening the chain can only start from the end of the chain. Step 1 Step 2 Disassembly Step 1 Step 2 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 265

265 MP 36 G - SafeLine 266 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

266 CABLE DRAG CHAIN PRODUCT RANGE MP 43 G Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 267

267 MP 43 G - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example Inside width = 2.44 inch Radius = 4.92 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover on both sides smooth running high stability flexible internal separation Alternative chain type MP 44 open version MP 36 G/MP 65 G Flange connection MP MP MP MP MP Order number: Configuration Chain bracket with variably placed metal angle Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Plug-in shelf system for reliable cable feed Strain relief bar ZL 268 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

268 MP 43 G - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.26 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 2.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 269

269 MP 43 G - MultiLine End Brackets End Brackets Bottom/outside Bottom/inside Top/outside Top/inside FP = Fixed point MP = Moving end point End Brackets Type Order no. Material Pack KA Steel plate 1 KA Stainless steel There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 270 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 43 G - MultiLine End Brackets Dimensions in inch Type A C D F G H Ø I KA 44 2.44 3.96 3.78 1.26 1.70 0.26 0.49 KA 44 3.31 4.82 4.65 1.26 1.70 0.26 0.49 KA 44 4.13 5.66 5.47 1.26 1.70 0.26 0.49 KA 44 5.

270 MP 43 G - MultiLine End Brackets Dimensions in inch Type A C D F G H Ø I KA KA KA KA KA Bottom and top/outside Type A B D F G H Ø I KA KA KA KA KA Bottom and top/inside Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 271

271 MP 43 G - Accessories Separator Type Order no. Description Pack TR Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if movable separators are used. An off-set configuration of the separators is advisable. The separator will stay solidly mounted at one side when the frame ridge is opened. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR Separator Shelving system Type Order no. Description Width in inch Pack RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RB RB 167 Shelf Shelving system Lock grid spacing 0.06 inch A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 272 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

272 MP 43 G - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 273

273 MP 43 G - MultiLine 274 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

274 CABLE DRAG CHAIN PRODUCT RANGE MP 65 G Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 275

275 MP 65 G - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example Inside width = 3.31 inch Radius = 7.87 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover on both sides smooth running high stability flexible internal separation Alternative chain type MP 66 open version MP MP MP Order number: Configuration Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Flange connection for closed cable drag chains Plug-in shelf system for reliable cable feed Strain relief bar ZL 276 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

276 MP 65 G - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 C Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : ft Vertical standing travel distance L vs : ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : ft/s Self-supporting speed V f : ft/s Gliding acceleration a g : ft/s² Self-supporting acceleration a f : ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.60 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R Outside height of chain link (H G ) Arc height (H) Moving end connection height (H MA ) Safety with pre-tension (S V ) Installation height with pre-tension (H SV ) Safety without pre-tension (S K ) Installation height without pre-tension (H SK ) Arc projection (M L ) Arc length (L B ) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 277

277 MP 65 G - MultiLine End Brackets End Brackets flange End Brackets angle Top/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Bottom/inside End Brackets flange Type Order no. Material Pack FL Steel plate 1 FL Steel plate 1 FL Steel plate 1 FL Stainless steel FL Stainless steel FL Stainless steel A cable drag chain requires 2 end brackets. The flange connection is divisible for commissioning and retrofitting. Thus, the chain remains in the installed position. End Brackets angle Type Order no. Material Pack KA Steel plate 1 KA Stainless steel There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 278 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

MP 65 G - MultiLine End Brackets flange Dimensions in inch Type A D G H Ø K L M N FL 082 3.39 4.13 2.38 0.28 3.07 5.57 1.57 4.13 FL 107 4.02 4.76 2.38 0.28 3.94 6.44 1.57 4.13 FL 142 4.

67 7.68 6.99 1.77 1.99 0.35 0.39 Bottom and top/outside Type A B D F G H Ø I KA 66 3.31 2.64 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 3.46 5.47 1.77 1.99 0.35 0.39 KA 66 5.67 5.00 6.99 1.77 1.99 0.35 0.39 Bottom and top/inside Murrplastik Systems, Inc.

278 MP 65 G - MultiLine End Brackets flange Dimensions in inch Type A D G H Ø K L M N FL FL FL Flange End Brackets angle Dimensions in inch Type A C D F G H Ø I KA KA KA Bottom and top/outside Type A B D F G H Ø I KA KA KA Bottom and top/inside Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 279

279 MP 65 G - Accessories Separator Type Order no. Description Pack TV Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TV Separator Shelving system Type Order no. Description Width in inch Pack RB RB 031 Shelf RB RB 048 Shelf RB RB 070 Shelf RB RB 092 Shelf RB RB 128 Shelf RT RT 66 Shelf support, including pin 1 Shelving system Lock grid spacing 0.06 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT Shelving system 280 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

280 MP 65 G - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 281

281 MP 65 G - MultiLine 282 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

282 VARIABLE ALUMINUM GUIDE CHANNEL SYSTEMS Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

283 Variable guide channel systems We steer you in the right direction! Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used, the chain links may lie incorrectly. This is especially true for large bend radii, since they have no side guidance. In most applications, the cables enter the chain in the middle. This results in the shortest chain length. When this is the case, the chain is about half as long as the travel distance. When the chain is moved to the left (see illustration below right), it simply unrolls in the guide channel. If it is moved to the right, it lies on itself when the self-support length is exceeded. If movement continues to the right, the glide rail compensates the difference in height of the chain link and ensures the minimum possible friction. This ensures that the cable drag chain runs optimally. 284 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

284 Section A-A: The cable drag chain glides on itself. Section B-B: The cable drag chain runs on the glide profile. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

285 VAW system advantages Adapted aluminum profiles The variable aluminum guide channel systems consist of different aluminum profiles. Each one is designed to work optimally with murrplastik cable drag chain systems. Variable widths and heights of chains The aluminum guide channel profiles suit different chain types and widths. They can be easily modified on site. Space saving variable aluminum guide channel systems Variable aluminum guide channel systems require little space. The complete system is hardly wider than the chain itself. Aligned assembly No screwing or welding is needed to join the individual profiles of the variable aluminum guide channel systems. Smooth transitions between channels are ensured due to special plastic connectors which are pressed into a groove. Fast installation The variable aluminum guide channel systems are fixed in place by special mounting pieces. The mounting holes of these pieces are used as drill templates. The mounting pieces also serve as trays for the chain connections. They are mounted on the inner side of the guide channel. An additional clamp on the outer side is advisable. 286 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

VAW system advantages Installation set included For all variable aluminum guide channel systems, the parts required for fastening and joining are included in the delivery.

286 VAW system advantages Installation set included For all variable aluminum guide channel systems, the parts required for fastening and joining are included in the delivery. These parts are included in the price of the guide channel system. Easy handling The glide rail is simply inserted into the guide channel profile. Securing into position requires only a screw in the first and last rail. A variable aluminum guide channel system is necessary when the self-supporting length is exceeded. New: VAW-MT The use of the guide channel middle section is for cable drag chains of the same and different chain sizes as well as for parallel and independent operation. The cable drag chains are securely separated from each other. Low noise level A level surface for the chain to run on is achieved by use of the glide rail and the T-slot in the channel. This arrangement guarantees trouble-free running of cable drag chain systems and reduces the noise level. Cost effective The use of standard components reduces costs. Up to 70 % savings over other systems. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 287

287 D Section A-A: The cable drag chain glides on itself. Section B-B: The chain runs on the glide profile. Lowered moving end connection It is sometimes necessary to lower the moving end connection for long travel distances. Please contact our engineers. In this case, modifications in chain layout have to be taken into consideration (e.g. chain extensions). 288 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

Selection criteria In order to make the correct choice of the variable aluminum guide channel system, the following parameters have to be known: Cable drag chain type (width, radius, installation)

288 Selection criteria In order to make the correct choice of the variable aluminum guide channel system, the following parameters have to be known: Cable drag chain type (width, radius, installation) Travel distance Chain contents or weight per meter Travel speed Acceleration/delay Transverse acceleration yes/no Environmental influences For detailed information see pages Required length of the variable aluminum guide channel system It is advisable to install a guide channel system for the entire travel distance. If the cable entry point is at the center of the travel distance, a glide rail is additionally required for half of the travel distance. Example: Travel distance: ft Feed: center Chain type: MP R 100 without pre-tension with 176 links = ft ft VAW guide channel m GSP 20/20 glide rail Assembly guidelines To properly install the VAW guide channel, a level surface is required. The channel sections (standard 2 m) are placed one after the other. Lengthwise connectors connect the guide channels to the outer contour. This ensures a smooth and straight connection. Also, due to the type of assembly, there is no warping of the guide channel. The inside width dimension (D) of the guide channels should be equal to chain outside width to inch (depending on chain type). The guide channel profiles are fastened with mounting pieces on the bottom part (e.g. base or support arm). Clamping should be from the inside or, if required, outside. The bore holes in the mounting pieces are used as a drilling guide. They are easily accessible with a hand drill. If the self-supporting length of the chain is exceeded, a glide rail must be used to compensate height for the side of the guide channel where the upper run cannot glide on the lower run (see cross section B-B). The GSP glide rail requires no fittings or adjustment. Depending on the chain type, the glide rail profile is pushed into the groove of the guide channel. The T-slot along the full length of the channel ensures that the rail is perfectly leveled. This guarantees trouble-free running of the chain system even at high speeds. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 289

289 VAW selection self-supporting When and which guide channel should I use? Variable widths and heights of chains The basic idea of the VAW variable aluminum guide channel system has been to develop a profile that fits various types and widths of cable drag chains. In addition, the installation has been designed to be as simple as possible. The system consists of aluminum profiles. Each profile contains several grooves into which you insert a glide rail. The type of cable drag chain determines the groove into which the glide rail is inserted. The table below indicates which VAW system is suitable for which type of cable drag chain. Article number Guide channel fastening with Article number EFK MP... Inside width Radius R Self-supporting Guide channel Spacer fastening plate Fastening all VAW DBP all VAW DBP 14016/ all VAW DBP 14030/ all VAW DBP 14040/ all VAW DBP all VAW DBP 14016/ all VAW DBP 14030/ all VAW DBP 14040/ all VAW DBP 14016/ all VAW DBP 14030/ all VAW DBP 14040/ all VAW DBP 14050/ all VAW DBP all VAW DBP all VAW DBP 14030/ all VAW DBP all VAW DBP all VAW DBP all VAW DBP 3003/ all VAW DBP all VAW DBP 3004/ all VAW DBP 3005/ all VAW DBP all VAW DBP all VAW DBP 3003/ all VAW DBP 3004/ all VAW DBP 3005/ all VAW x DBP 3001 for inside clamping G 1.02 all VAW DBP Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

290 VAW selection self-supporting Article number Guide channel fastening with Article number EFK MP... Inside width Radius R Self-supporting Guide channel Spacer fastening plate Fastening G 1.46 all VAW DBP G 2.44 all VAW DBP 3003/ G 3.43 all VAW DBP 3004/ G 3.98 all VAW DBP 3005/ G 4.92 all VAW x DBP 3001 for inside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all VAW DBP 3003/ all VAW DBP 3004/ all VAW DBP 3005/ all VAW x DBP 3001 for inside clamping all VAW x DBP 3001 for inside clamping G 2.44 all VAW DBP 3003/ G 3.39 all VAW DBP 3004/ G 4.02 all VAW DBP 3005/ G 4.92 all VAW x DBP 3001 for inside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping G all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping U all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping G all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW x DBP 3001 for inside clamping KL 50 for outside clamping all all VAW KL Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 291

291 VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP all VAW KL 50 for outside clamping GSP 20/ one-sided 0.98 all VAW KL 50 for outside clamping GSP 20/ all VAW KL 50 for outside clamping GSP 20/ all VAW KL 50 for outside clamping GSP 20/ all VAW KL 50 for outside clamping GSP 20/ all 0.98 all to R 3.74 VAW DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP 3002 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP 3003/35062 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP for inside clamping GSP 20/ KL 50 for outside clamping Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

292 VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP 3004/35086 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP 3005/35102 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.74 VAW DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ to R 3.74 VAW DBP 3002 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ to R 3.74 VAW DBP 3003/35062 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ to R 3.74 VAW DBP 3004/35086 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ to R 3.74 VAW DBP 3005/35102 for inside clamping GSP 20/ KL 50 for outside clamping R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ to R 3.74 VAW x DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 293

293 VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP R 4.72 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 1.02 to R 3.94 VAW DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 1.46 to R 3.94 VAW DBP 3002 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 2.44 to R 3.94 VAW DBP 3003/35062 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 3.43 to R 3.94 VAW DBP 3004/35086 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 3.98 to R 3.94 VAW DBP 3005/35102 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ G 4.92 to R 3.94 VAW x DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 4.92 to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ all to R 5.91 VAW KL GSP 20/ R 7.87 to R 9.84 VAW KL GSP 20/ to R 3.94 VAW DBP 3003/35062 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

294 VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP to R 3.94 VAW DBP 3004/35086 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.94 VAW DBP 3005/35102 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.94 VAW x DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ to R 3.94 VAW x DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R VAW KL GSP 5/ G 2.44 to R 3.94 VAW DBP 3003/35062 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ G 3.39 to R 3.94 VAW DBP 3004/35086 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ G 4.02 to R 3.94 VAW DBP 3005/35102 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ G 4.92 to R 3.94 VAW x DBP 3001 for inside clamping GSP 20/ KL 50 for outside clamping R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ all to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 295

295 VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP 43 G all to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ U all to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ R VAW KL GSP 5/ all to R 5.91 VAW KL GSP 20/ R 7.87 VAW KL GSP 20/ R 9.84 VAW KL GSP 20/ R VAW KL GSP 5/ all to R 5.91 VAW KL GSP 20/ R 7.87 to R 9.84 VAW KL GSP 20/ R VAW KL GSP 5/ all to R 9.45 VAW KL GSP 20/ R to R 13.78VAW KL GSP 9/ G all to R 9.45 VAW KL GSP 20/ R to R 13.78VAW KL GSP 9/ all to R 9.84 VAW KL GSP 20/ R300 to R VAW KL GSP 7/ all to R VAW KL GSP 9/ all to R VAW KL GSP 9/ all to R VAW MT KL GSP 33/ VAW standard delivery lengths of 2 m. Also available in 5 m lengths upon request. Please specify the length of your guide channel system with your order. 296 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

296 VAW accessories Simple, quick and reliable installation......of the murrplastik guide channel system The groove system of the individual aluminum channel panels combined with the glide rail profiles is an extremely variable guide channel system with very few accessories that provides reliable, robust and visually attractive chain guidance. The glide rail is simply pushed into the groove in the aluminum profile. The rails are prevented from moving by just one screw in the first and last rail. Channel installation is foolproof. The system is installed at the desired position using special clamping pieces (see separate table). Smooth, aligned transition between channel profiles is guaranteed with the use of special plastic connectors that are placed in a groove designed for that purpose. The murrplastik guide channel system has no welding seams or screw parts projecting into the movement space of the chain. The aluminum construction eliminates the need to use a protective coating against rust. Economical solution The use of standard components reduces costs. Construction and manufacturing is unnecessary. This would normally include the following steps: Designing and drawing the installation Obtaining the individual parts Measuring plates Stamping plate Bending plates Drilling the attachment holes Mounting the guide channels Welding connections between channels, grinding Painting When the costs of the components and assembly time are added together, it soon becomes apparent that the murrplastik VAW system is a very cost effective solution. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 297

297 VAW positioning Glide rail profile Positioning VAW glide rail profiles 298 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

298 VAW dimension tables VAW guide channel 25 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 25 DBP VAW 25 DBP 14020/ VAW 25 DBP 14030/ VAW 25 DBP 14040/ VAW 25 DBP 14050/ VAW 25 DBP VAW guide channel 35 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 35 DBP VAW 35 DBP VAW 35 DBP VAW 35 DBP VAW 35 DBP 3003/ VAW 35 DBP 3004/ VAW 35 DBP 3005/ VAW guide channel 80 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 80 DBP VAW 80 DBP VAW 80 DBP VAW 80 DBP VAW 80 DBP 3003/ VAW 80 DBP 3004/ VAW 80 DBP 3005/ Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 299

299 VAW dimension tables Spacer fastening plate (DBP) DBP DBP DBP DBP DBP DBP / 14030/ 14040/ 14050/ ,8 27,2 38,2 51,7 5,2 5,2 5,2 3,5 3, VAW VAW VAW VAW VAW VAW ,2 5,2 5,2 4,2 4,2 4, bore holes on the MP 18 serve as through holes for congruence of chain connection and spacer plate. DBP DBP DBP DBP DBP DBP DBP / / 3005/ bore holes serve as through holes for congruence of chain connection and spacer plate. Clamping piece KL Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

300 VAW dimension tables VAW 80 guide channel (inside or outside clamping) Inside clamping with spacer fastening plate C = outside width of chain + clearance inch Outside clamping with clamping piece KL 50 E = Outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see page 304) VAW guide channel 122 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see page 304) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 301

301 VAW dimension tables VAW guide channel 150 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see page 304) VAW guide channel 177 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see page 304) 302 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

302 VAW dimension tables VAW guide channel 248 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see page 304) Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 303

303 VAW dimension tables VAW-MT guide channel 248 Clamping with KL 50 clamping piece C = outside width of chain + clearance inch E = outside width of chain + SP inch Clear width D = outside width of chain + SP SP = clearance (see below) Clearance (SP) with variable clamping Chain type MP 18 Total clearance (SP) up to 0.24 inch MP 25 G MP 26 MP 3000 MP 35 MP 36 G up to 0.31 inch MP 32 MP 41 MP 42 MP 43 G MP 44 MP 52 MP 62 MP 65 G MP 66 MP 72 up to 0.47 inch MP 82 MP 102 up to 0.63 inch Generally, the clearance between the guide channel and the chain must sufficient to ensure the chain in the guide channel never jams. The clearance must be at least 0.08 inch less than the width of the side panel of the chain link; otherwise, the chain will not glide properly and problems will occur. 304 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

304 STRAIN RELIEF SYSTEMS Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

Strain relief systems We take the load off The ZL strain relief plates are used for relieving cable load of various cables on machines and other installations.

305 Strain relief systems We take the load off The ZL strain relief plates are used for relieving cable load of various cables on machines and other installations. When used in cable drag chains, the cables are fastened on both sides to the strain relief plates with KB 28 power cable ties. The undercut on the strain relief plates prevents the cable tie from slipping off, even if the cable diameter is as large as or larger than the tongue width. Each cable is clamped twice on each end with cable ties. Wide, highly flexible cable ties distribute the pressure and increase service life. When using a shelving system, two rails are mounted one over the other. The distance sleeves are used for this purpose. Washers are included in the scope of delivery of the strain relief plates. However, we recommend our ELB insert bushings. These prevent the cold flow deformation properties of the plastic. The ZL strain relief plates should 306 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Durable fastening with metal bushing be mounted at a

306 Durable fastening with metal bushing be mounted at a distance at least 20 to 30 times of the maximum cable diameter from where the cable bends. Strain relief plate installed in the cable drag chain system. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 307

Longer life Each cable is secured with two wide cable ties on each end.

Wide support surface on the individual tongues Cable is optimally fastened by means of the wide support surface of the

2-tier installation 2-tier installation is possible using the spacer sleeves (DH). 5.

307 ZL system advantages 1. Secure hold The undercut prevents the cable tie from slipping off, even for very large cable diameters. 2. Longer life Each cable is secured with two wide cable ties on each end. Wide, highly flexible power cable ties distribute the pressure on the cable and increase cable life. 3. Wide support surface on the individual tongues Cable is optimally fastened by means of the wide support surface of the individual strain relief tongues. The wide cable ties ensure fast and easy strain relief that protects cables tier installation 2-tier installation is possible using the spacer sleeves (DH). 5. Adapted fastening dimensions The drill holes of the relief plates match those on the chain brackets. Please consider the hole dimensions of the strain relief plate when mounted in the end brackets (see page 158). 308 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

ZL system advantages 6. Durable attachment with metal bushings The metal bushings prevent cold flow deformation properties.

Ease of installation Even when cables are lying side by side it is still possible to secure them with two power cable ties. 8.

cables of varying diameters and with extremely high packing density. 9.

308 ZL system advantages 6. Durable attachment with metal bushings The metal bushings prevent cold flow deformation properties. Metal is screwed to metal. Loosening of the screws is prevented. (Please order separately.) 7. Ease of installation Even when cables are lying side by side it is still possible to secure them with two power cable ties. 8. Various cable diameters Flexible use of wide cable ties enables fast and easy strain relief that protects cables, even with cables of varying diameters and with extremely high packing density. 9. Cost effective solution Suitable for laying cables at machines and plants. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

Strain relief systems Type Order no. Compatible with cable drag chains type Pack Distance (piece) Drill holes (inch) ZL 39 87 70 10 14 MP 25037G / MP 44045 / MP 66045 10 0.

309 Strain relief systems Type Order no. Compatible with cable drag chains type Pack Distance (piece) Drill holes (inch) ZL MP 25037G / MP / MP ZL MP 25062G / MP / MP / MP / MP44062 / MP ZL MP / MP / MP ZL MP 25087G / MP / MP ZL MP / MP / MP / MP / MP ZL MP 25125G / MP / MP ZL MP / MP / MP / MP ZL 180/ MP / MP ZL 180/ MP If it becomes necessary to fix the strain relief plate directly on the end brackets, you should use the hole dimensions of the strain relief plate. The scope of delivery includes washers. Strain relief plates in various widths. Strain relief plate mounted in end brackets. 2-tier strain relief plates. Type Order no. Pack (piece) Spacer sleeve DH 32* (Spacer sleeve made of brass) open Wide power cable tie KB 28 Bundle range approx inch Insert bushing ELB* open * not for ZL 180/8 310 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

310 Strain relief systems murrplastik recommendations Strain relief should be provided at each end of the chain using 2 cable ties for each end. The plates should be situated at a distance from the end point of the cable bend equivalent to 20 to 30 times the cable diameter. When installing the end brackets, the number of chain links (20 to 30 times max. cable diameter) must not be moved. The strain relief is suitable for cables up to 1.57 inch diameter. All electric cables must be strain relieved at both the moving and fixed end. For longer travel distances (gliding application), strain relief on one side at the moving end may be advisable. Care must be taken to ensure the pressure is be applied only to a wide surface area of the cable outer jacket. The clamping must not crush the individual wires in the cable but should still hold the cable firmly so that the cable cannot be moved. Hydraulic and pneumatic conduits have to be strain relieved only at one end. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 311

311 ZL dimensional information 312 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

312 MATERIALS DATA PLASTIC AND LIGHT METAL PARTS Murrplastik Systems, Inc F Skyron Drive Doylestown, PA

313 Material data for plastic parts Material table for standard material Mechanical properties Test Test value Unit State Tensile strength (DIN ) dry 190 N/mm 2 humid 120 N/mm 2 Elongation tear resistance (DIN ) dry 4 % humid 6 % Elasticity module Tensile test dry N/mm 2 humid N/mm 2 Impact resistance (DIN ) 23 O C dry 60 kj/m 2 23 O C humid 75 kj/m 2-40 O C dry 50 kj/m 2 Creep module E O C humid N/mm O C dry N/mm 2 Heat conductivity 0.3 W/k m Static electricity value (DIN 53483) dry 3.8 MHz humid 6.8 MHz Special throughput resistance dry x cm humid x cm Impact resistance, thickness inch 80 kv/mm Surface resistance ROA dry humid Moisture absorption O C 1,8 ± 0,2 % murrplastik cable drag chain systems made of plastic have been developed for use in extreme conditions. The standard material is glass-fiber-reinforced black plastic and is ideal for the following requirements: 1) high mechanical demands such as strain, pressure, gliding and torsion 2) weatherproof 3) clean rooms, hygienic areas and similar environmental conditions The PA (polyamide) plastic in use ensures these requirements are easily met. Thanks to murrplastik s many years of experience, we can also supply modified materials for special applications. We have a solution for nearly all special cases. Thermal properties Temperature limits permitted temp. range -40 to 100 O C 5000 hours up to 135 O C several hours up to 170 O C Other properties Density dry 1.4 g/cm 3 Friction coefficient unlubricated Fire behavior DIN VDE 0304 Part 3 Flame class HB/UL 94 General The used plastic contains no halogens, silicones or hard metals such as lead or cadmium. No formaldehydes are used in manufacturing. The use of plastic cable drag chains fulfills the requirements of the food and beverage industry. 314 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

314 Chemical resistance Medium Concentration Temperature Resistance in % in C Acetic acid 10 Acetic acid, aqueous 10 Acetic acid, aqueous, concentrated 95 Acetone TR Ammonia + 20 Ammonia (liquid) TR + 70 Benzine H 85 Benzol H Bitumen H Boracic acid, aqueous H Butanoiuc acid, aqueous 20 Calcium chloride GL 23 Caustic potash solution 10 Chlorine, chlorine water H Chlorine, hydrocarbon Chromate, aqueous 10 Diesel oil H Ethanol 40 Ethyl acetate TR Fluorohydrocarbons Formaldehyde and polymac. TR Formaldehyde, aqueous 30 Grease, edible Gab H Hydraulic oils H Hydrochloric acid 2 Hydrochloric acid, aqueous 20 Lactic H Lactic acid 90 Lactic acid, aqueous 10 Liquid gas (DIN ) Lubricants, edible fats H Mercury TR Methyl acetate TR Mineral oil H Oil/edible oil, lubricating oil H Oleic acid H Paints and lacquers Paraffin, paraffin oil H Polyester resins H Potassium chloride, aqueous 10 Potassium nitrate, aqueous 10 Propane TR Sodium carbonate, aqueous 10 Tartaric acid 50 Tartaric acid, aqueous 10 Vaseline H Xylol TR Chemical resistance murrplastik cable drag chains are resistant to fuels and lubricating oils, oils, grease, alcohol, ester, ketone, aliphatic and aromatic hydrocarbons. Oxidizing agents and acids are harmful. The table shows the resistance level to various chemicals. Please inquire if a particular chemical is not shown. Meaning of symbols resistant limited resistance not resistant soluble G Saturated liquid aqueous H Commercially available TR Technically pure All information with respect to the chemical and physical properties of murrplastik products as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge. It shall not exempt the purchaser from the liability of examinations and tests to determine the exact qualification of the products for the use intended. The purchaser shall be solely liable for the application, use, and installation of the product. The purchaser shall also comply with the legal and official provisions and observe any possible property rights of third parties. Our General Terms and Conditions apply. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 315

315 Material characteristics 1. Burning behavior The flame-retardant properties of murrplastik cable drag chains meet various classifications: Test procedures acc. to VDE 0304 Parts 3/5.70, classification: IIc; Tested acc. UL 94 - Standard Tests for Flammability of Plastic Materials for Parts in Devices and Appliances. Classification: 94 HB with 0.13 and 0.06 inch body thicknesses. Tested acc. to DIN 4102 Flame retardation in materials and buildings. Classification: Materials class B2; For more demanding applications please inquire about special solutions Radiation resistance murrplastik cable drag chains are very resistant to radiation. In the range of 8 x 10 4 rd gamma radiation the mechanical properties change very little Vacuum murrplastik chains may be safely used in a vacuum. Gas will only be given off in very low amounts Welding flashes and hot sparks murrplastik cable drag chains provide excellent cable protection on robotic welding machines. This is proven by laboratory tests and numerous references. Welding beads may be noticeable but these do not impair functioning in any way. murrplastik chains have successfully passed tests with mid-sized metal chips at a temperature of 500 O C. 316 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

316 Use in EX explosion proof areas murrplastik cable drag chains may be used in explosion proof areas if manufactured to specification with a special material and if the standard regulations are observed. All murrplastik cable drag chains are certified according to European ATEX Directive 94/9 EC and can be safely used in the relevant areas. Weatherproof murrplastik cable drag chains are suitable for outdoor applications. The mechanical properties are not influenced Use in clean rooms murrplastik uses a special material. This reduces even further the very low wear of a normal chain. In many applications in which difficult special conditions apply, a drag chain can still be used. We have carried out intensive testing for both self-supporting and gliding applications. Special colors If requested, cable drag chain systems made of plastic can be supplied in different colors. To achieve a particular color effect, colors can also be combined. Minimum order quantities and a surcharge apply Use in cold storage Chain made of a special material can be supplied for use in cold storage. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 317

317 Material specifications Technical specifications for light metal parts Density 2.7 g/cm 3 Elasticity module 70 kn/mm 2 Electrical conductivity m/wmm 2 Heat conductivity W/k cm Heat loss coefficient 23.4 cm/cm k 106 Tensile strength 215 N/mm 2 Percent elongation at failure 12 % The advantage of using light metal for certain parts is in the combination of mechanical strength, resistance to chemical attack and physical properties. murrplastik uses a special aluminum alloy material. It is characterized by the following properties: 1. light, sturdy, hard, smooth and resistant 2. makes a good visual impression 3. very low friction and wear of light metal compared to cable materials 4. does not become brittle at low temperatures 5. sea water resistant We use light metal for the following applications: Crossbar profiles, and profiles for the VAW variable guide channel system. 318 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

318 Technical support & service Layout/Project planning We will submit to you a complete layout of a cable drag chain system including accessories. Customized preparation of drawings If you maintain your own drawing structure and/or administration, we will prepare the drawings in your required size. Fabrication of the complete system With plugs and cables Guaranteed quality From planning the system to assembly On-site assembly Reduced initial operation time due to expert installation. Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 319

Ideas - Systems - Success Innovative new products from murrplastik MURRFLEX CABLE PROTECTION CON- DUIT AND SCREWED CON- NECTION SYSTEMS MADE FROM PLASTIC AND METAL The murrflex system consists of

A variety of conduit types are available for a wide range of application areas. What that means for the user is a high degree of user convenience.

Countless applications without failures and in difficult conditions demonstrate the consistently high quality of the systems.

319 Ideas - Systems - Success Innovative new products from murrplastik MURRFLEX CABLE PROTECTION CON- DUIT AND SCREWED CON- NECTION SYSTEMS MADE FROM PLASTIC AND METAL The murrflex system consists of high-grade flexible cable protection conduits, screwed connections and accessories. All components are made to match each other, thereby ensuring fast and trouble-free assembly. A variety of conduit types are available for a wide range of application areas. What that means for the user is a high degree of user convenience. CABLE DRAG CHAIN SYSTEMS MADE OF PLASTIC All murrplastik drag chains are fitted with an opening mechanism. Only a screwdriver is required to open any system. Countless applications without failures and in difficult conditions demonstrate the consistently high quality of the systems. In response to today s pressures on time and money, the systems can be assembled quickly and cost effectively. murrplastik s advisers will be happy to help in the project planning of your application. M-FLEX CABLE SYSTEMS murrplastik offers a large selection of flexible control, data, and bus cables for flexible use in cable drag chains. The different cable constructions and coating grades enable you to match the cables optimally to the conditions of use and ambient conditions on site. 4The advantages 1. Fast assembly of screw fittings suitable for all conduits 2. Various conduit types 3. Easy to install 4. UL approved 6The advantages 1. All systems with opening mechanism 2. Easy handling 3. Sturdy plastic chains 4. Design support from - murrplastik 5. CAD library 6. Guide channel systems 5The advantages 1. Cables adapted to the individual application 2. Functional reliability thanks to optimal cable adjustment 3. Highly economical 4. Configuration service for cabledrag chain and cable 5. Fabrication and installation service 320 Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com

Ideas - Systems - Success Innovative new products from murrplastik ACCESSORIES FOR CONTROL UNIT CONSTRUCTION This product group includes accessories for control unit construction.

LABELING SYSTEMS FOR Single wires Switch gear Terminals Cables Conduits Control and signal units The ACS Ademark computer system is the logical next step up in development of the existing Ademark

320 Ideas - Systems - Success Innovative new products from murrplastik ACCESSORIES FOR CONTROL UNIT CONSTRUCTION This product group includes accessories for control unit construction. As well as a wide variety of tools, the scope of delivery also includes cable ties, fixing rivets, screwed and adhesive holders. CABLE ENTRY AND CABLE HOLDING SYSTEMS The cable entry system is a combination of cable fixing rail and clamping profile. However, the outstanding technical advantage is the consistent divisibility of the system. This enables preassembled cables or lines to be retrofitted. LABELING SYSTEMS FOR Single wires Switch gear Terminals Cables Conduits Control and signal units The ACS Ademark computer system is the logical next step up in development of the existing Ademark system. It meets all the requirements of a modern, compatible labeling system. In addition to very easy manual data entry, it also enables existing data from a wide variety of CAD systems to be imported. 3The advantages 1. Reduction in ordering costs 2. Quality accessories 3. Specialist tools 4 The advantages 1. Costs slashed through the use of preassembled cables 2. Easy assembly with lock-in positioning 3. Cables can be identified by means of labels 4. No special punching tools required 6The advantages 1. Universal system 2. Many years of experience 3. Multiple processing of labels 4. Project-specific operation 5. Reduction in stock range 6. Independent manufacturer of the labeling material Murrplastik Systems, Inc F Skyron Drive Doylestown, PA cablemgmt@murrplastik.com 321

Cable drag chain systems

Cable drag chain systems New chain series 62 interior height With additional noise reduction 1 PowerLine open System overview 1 Chain bracket 2 Strain relief Chain bracket flexible RS-ZL frame rail STF