Model W1742S 15" Planer with Spiral Cutterhead Manual Insert
|
|
|
- Susan Baker
- 6 years ago
- Views:
Transcription
1 Model W1742S 15" Planer with Spiral Cutterhead Manual Insert Phone #: (360) Online Tech Support: Web: The Model W1742S is the same as the Model W1742, except it has a spiral cutterhead. Besides the data sheet and parts in this insert, the content in the Model W1742 owner's manual is the same for both machines. Before operating your new machine, you MUST read and understand this insert and the entire Model W1742 manual to reduce the risk of injury from improper use or setup. If you have any further questions about this manual insert or the differences between the Model W1742S and the Model W1742, contact our Technical Support at (360) or tech-support@shopfox.biz. COPYRIGHT MAY, 2008 BY WOODSTOCK INTERNATIONAL, INC. REVISED SEPTEMBER, 2010 (TR) WARNING: NO PORTION OF THIS PUBLICATION MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT #10741TR THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China
2 W1742S 15" Planer with Spiral Cutterhead MACHINE SPECIFICATIONS Phone #: (360) Online Tech Support: Web: Motor Type...TEFC Capacitor Start Induction Horsepower... 3 HP Voltage V Prewired V Phase... Single Amps... 15A Speed RPM Cycle Hz Number Of Speeds... 1 Power Transfer... Triple V-Belt Drive Bearings... Sealed and Lubricated Main Specifications MOdEl W1742S 15" PlANEr with SPIrAl CUTTErHEAd Operation Information Maximum Cutting Width... 15" Maximum Cutting Height... 8" Minimum Stock Length... 6" Minimum Stock Thickness... 3/16" Maximum Stock Thickness... 8" Number of Cuts Per Inch /56 Number of Cuts Per Minute (Effective)...20,000 Planing Feed Rate...16/30 FPM Maximum Cutting Depth (Planing Full Width)... 3/32" Maximum Cutting Depth (Planing 6" Wide Board)...1/8" Cutterhead Information Cutterhead Type...Spiral with German-Made Indexable Carbide Inserts Cutterhead Diameter... 3" Cutterhead Speed RPM Number of Cutter Spirals... 4 Number of Indexable Inserts Cutter Insert Type... Indexable Carbide with 4 Cutting Edges Cutter Dimensions x 14 x 2 MM Table Information Table Size Including Wings... 42"L x 15"W x 1 3 4"T Table Movement... 8" Floor to Table Height... 27" 35" Number of Bed Rollers... 2 Overall Dimensions Weight lbs. Length... 42" Width /2" Height /8" Foot Print (Length/Width) " x 22" Model W1742S Machine Specifications, Page 1 of 2-2-
3 W1742S 15" Planer with Spiral Cutterhead Construction Materials Body...Cast Iron Cabinet... Formed Steel Cutterhead...Steel Infeed Roller... Solid Serrated Steel Outfeed Roller... Solid Serrated Steel Table... Precision Ground Cast Iron Paint... Powder Coated Shipping Dimensions Carton #1 Type... Wood Crate Content...Machine Weight Lbs. Length/Width/Height " x 30" x 47" Electrical Switch... Magnetic Switch with Thermal Overload Protection Switch Voltage...220V Cord Length... 6 ft. Cord Gauge...12 gauge Recommended Circuit Size...20 amp Included Plug...No Recommended Plug Other Number of Dust Ports... 1 Dust Port Size... 4" Mobile Base...Built-In Customer Assembly Time... Approximately 30 Minutes Warranty... 2 Year Country of Origin... China Features Spiral Cutterhead with German-Made Indexable Carbide Inserts Precision Ground Cast-Iron Extension Wings Built-In Mobile Base Pedestal Mounted Control Switch Inch and Metric Measurement Table Elevation Scale Two Adjustable Bed Rollers Chip Breaker and Pressure Bar Top-Mounted Board Return Rollers Four Column Support with Positive Table Locks Two Speed Automatic Board Feed -3-
4 Cabinet Breakdown W1742S 15" Planer with Spiral Cutterhead
5 W1742S 15" Planer with Spiral Cutterhead Cabinet Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 X RUBBER FEET 39 X COLLAR 2 X STRAIN RELIEF 41 X PLATE CONNECTING ROD 3 X UNIVERSAL PULLEY 42 XPSS04M SET SCREW M6-1 X 12 4 XPN03M HEX NUT M X MOTOR PLATE 5 XPW01M FLAT WASHER 8MM 44 XPFH06M FLAT HD SCR M6-1 X 20 6 XPB86M HEX BOLT M X X COVER 7 X SLEEVE 46 X ENCLOSED STAND 8 XPR16M EXT RETAINING RING 9MM 47 XPB144M HEX BOLT M X 55 9 XPW06M FLAT WASHER 12MM 48 XPW04M FLAT WASHER 10MM 10 X SHAFT 12MM 49 XPN02M HEX NUT M X PEDAL 50 X BUSHING 12 XPN03M HEX NUT M X PLATE CONNECTING ROD ASSY 13 XPB45M HEX BOLT M X XPW04M FLAT WASHER 10MM 14 XPW01M FLAT WASHER 8MM 53 XPN02M HEX NUT M XPB22M HEX BOLT M X XPB44M HEX BOLT M X X BRACKET 55 XPSS14M SET SCREW M X XPR21M INT RETAINING RING 35MM 56 XPK12M KEY 5 X 5 X XP6202 BALL BEARING XPB09M HEX BOLT M X X TROLLEY WHEEL 58 XPB83M HEX BOLT M6-1 X X SLEEVE 59 X BALL STRAIN RELIEF 21 XPLN09 LOCK NUT M X CONTROL BOX 22 XPW06M FLAT WASHER 12MM 61 X SUPPORT ARM 23 X SPECIAL BOLT 62 XPHTEK6 TAP SCREW #10 X 3/8 24 X TROLLEY UNIVERSAL KIT 63 X CONTROL PANEL 25 XPB118M HEX BOLT M X X EMERGENCY STOP BUTTON 26 XPN03M HEX NUT M X POWER LAMP 27 XPW01M FLAT WASHER 8MM 66 X ON BUTTON 30 X MOTOR 3HP 220V 67 X HEX NUT M X MOTOR FAN COVER 68 XPW02M FLAT WASHER 5MM 30-2 X MOTOR FAN 69 X PLATE 30-3 X CAPACITOR COVER 70 XPB17M HEX BOLT M6-1X X RUN CAPACITOR 20UF 250VAC 71 XPW03M FLAT WASHER 6MM 30-5 X START CAPACITOR 500UF 125VAC 72 X MAGNETIC SWITCH ASSY 30-6 X JUNCTION BOX 72-1 X SWITCH BOX BACK COVER 35 XPW06M FLAT WASHER 12MM 72-2 X CONTACTOR NHD C35-D 220V 36 XPN09M HEX NUT M X OL RELAY NHD NTH X ADJUST BOLT 72-4 X SWITCH BOX FRONT COVER 38 XPSS03M SET SCREW M6-1 X 8 73 XPS22M PHLP HD SCREW M5-.8 X 25-5-
6 Headstock Breakdown W1742S 15" Planer with Spiral Cutterhead
7 W1742S 15" Planer with Spiral Cutterhead Headstock Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 101 X HANDLE 150 XP6205 BALL BEARING XPN09M HEX NUT M XPB83M HEX BOLT M6-1 X XPW06M FLAT WASHER 12MM 152 XPW03M FLAT WASHER 6MM 105 X HANDWHEEL 153 X SPROCKET 106 X COLLAR 154 X SCALE 107 XPR29M INT RETAINIING RING 32MM 155 XPW03M FLAT WASHER 6MM 108 XP6201 BALL BEARING XPS14M PHLP HD SCR M6-1 X XPK48M KEY 4 X 4 X X POINTER 110 X WORM GEAR 158 XPW03M FLAT WASHER 6MM 111 X WORM HOUSING 159 XPS14M PHLP HD SCR M6-1 X X CAP SCREW M5-0.8 X X CUT LIMIT PLATE 113 X ROLLER 161 XPS03M PHLP HD SCR M6-1 X X ROLLER STAND 162 X HEAD CASTING 115 PSB155M CAP SCREW M X X OUTFEED ROLLER 116 X BELT COVER 164 XPK08M KEY 5 X 5 X X FEMALE KNOB M X COMPRESSION SPRING 118 XPFH02M FLAT HD SCR M6-1 X X SPECIAL SET SCREW 119 X DUST HOOD 167 X BUSHING 120 XPSB14M CAP SCREW M X X PLATE XPW01M FLAT WASHER 8MM 169 XPB03M HEX BOLT M X XPB04M HEX BOLT M6-1 X XPSS53M SET SCREW M5-.8 X XPN01M HEX NUT M XPN06M HEX NUT M XPW03M FLAT WASHER 6MM 172 X SHAFT 124 X UPPER COVER 173 XPSS25M SET SCREW M6-1 X XPFB01M FLANGE BOLT M6-1 X X CHIP BREAKER 126 X FOAM 175 XPSS58M SET SCREW M6-1 X X GEAR BOX COVER 176 XPN01M HEX NUT M XPVMX60 V-BELT MX X RECEIVER PIN 129 XPSB45M CAP SCREW M X X LOCKING ROD 130 XPRP07M ROLL PIN 6 X XPR03M EXT RETAINING RING 12MM 131 X SAFETY HATCH 180 XPLW05M LOCK WASHER 12MM 132 XPFB09M FLANGE BOLT M6-1 X XPN09M HEX NUT M X IDLE BRACKET ASSY 182 XPEC05M E-CLIP 15MM X BRACKET 183 X COLLAR X IDLE PULLEY 184 X ANTI-KICKBACK FINGER X IDLE SHAFT 185 X SHAFT 134 X SHAFT 186 XPSS06M SET SCREW M X X COLLAR 187 XPB83M HEX BOLT M6-1 X X EXTENSION SPRING 188 XPW03M FLAT WASHER 6MM 137 X HANGER 189 X SPROCKET 138 XPSB68M CAP SCREW M6-1 X X CHAIN 06B-1 X X CHIP DEFLECTOR PLATE 191 XPK08M KEY 5 X 5 X XPFB01M FLANGE BOLT M6-1 X X INFEED ROLLER 141 X PRESS PLATE 193 XPW03M FLAT WASHER 6MM 142 XPFB01M FLANGE BOLT M6-1 X XPB02M HEX BOLT M6-1 X X1741S164 INDEXABLE INSERT 14 X 14 X X CUTTERHEAD PULLEY 145 XPFH35M FLAT HD TORX SCR T20 M6-1 X X MOTOR PULLEY 146 X1741S227 DRIVER BIT TORX T X COLLAR 147 X1741S228 L-WRENCH TORX T XPB09M HEX BOLT M X X1742S148 SPIRAL CUTTERHEAD 199 X BELT GUARD 149 XPK129M KEY 8 X 8 X 36-7-
8 Gearbox Breakdown W1742S 15" Planer with Spiral Cutterhead REF PART # DESCRIPTION REF PART # DESCRIPTION 201 X GEAR BOX 222 XPW03M FLAT WASHER 6MM 202 XPB10M HEX BOLT M6-1 X X COMPRESSION SPRING 203 X SPROCKET 224 X STEEL BALL 4MM 204 XPW01M FLAT WASHER 8MM 225 X GEAR 205 XPB03M HEX BOLT M X XPK36M KEY 5 X 5 X X CHAIN 06B-1 X X GASKET 207 X FEMALE KNOB M X GEAR BOX COVER 208 X SHAFT 229 XPB22M HEX BOLT M X XP6201 BALL BEARING X OIL PLUG 210 X GEAR 231 X FLANGE COVER 211 XPK19M KEY 5 X 5 X XPSB33M CAP SCREW M5-.8 X X SHAFT 233 X OIL SEAL 25 X 40 X XP6201 BALL BEARING XPRP35M PIN 5 X X GEAR 235 X SHIFT FORK 215 XPK06M KEY 5 X 5 X X HANDLE SHAFT 216 X OIL SEAL 25 X 32 X X X O-RING 16 X X SHAFT 238 XPFB01M FLANGE BOLT M6-1 X XP6204 BALL BEARING XPK08M KEY 5 X 5 X XPR09M EXT RETAINING RING 20MM 240 XP6204 BALL BEARING XP6201 BALL BEARING X GEAR 221 XPS03M PHLP HD SCR M6-1 X XPSS25M SET SCREW M6-1 X 20-8-
9 W1742S 15" Planer with Spiral Cutterhead Columns Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION 301 X CHAIN 12.7 AX X GEAR 302 XPB24M HEX BOLT M X XPK69M KEY 4 X 4 X XPW06M FLAT WASHER 12MM 318 XPR03M EXT RETAINING RING 12MM 304 X LIFTING BAR 319 X SPROCKET 305 X COLUMN 320 XPK08M KEY 5 X 5 X P6302 BALL BEARING XPW04M FLAT WASHER 10MM 307 XPR24M INT RETAINING RING 42MM 322 XPN02M HEX NUT M X COLUMN 323 X BRACKET 309 X SPROCKET 324 XPR05M EXT RETAINING RING 15MM 310 XPSS13M SET SCREW M X XPW01M FLAT WASHER 8MM 311 X LEAD SCREW 326 XPB09M HEX BOLT M X X LEAD SCREW 327 XPR23M INT RETAINING RING 40MM 313 X LEAD NUT 328 XPN09M HEX NUT M XPSB02M CAP SCREW M6-1 X XPR05M EXT RETAINING RING 15MM 315 X BUSHING 333 X BASE -9-
10 Table Breakdown W1742S 15" Planer with Spiral Cutterhead REF PART # DESCRIPTION REF PART # DESCRIPTION 401 XPSS09M SET SCREW M X X GIB 404 XPB26M HEX BOLT M X X LOCK BAR 405 XPW01M FLAT WASHER 8MM 412 XPSS11M SET SCREW M6-1 X XPLW04M LOCK WASHER 8MM 413 X ECCENTRIC SHAFT 407 X EXTENSION WING 414 XP6203 BALL BEARING X FEMALE KNOB M X ROLLER 409 X WEDGE DOG 416 X TABLE/BED -10-
11 W1742S 15" Planer with Spiral Cutterhead Labels & Cosmetics Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Woodstock International, Inc. at (360) or to order new labels REF PART # DESCRIPTION REF PART # DESCRIPTION 500 X SHOP FOX LOGO PLATE 507 XLABEL-04S ELECTRICTY LABEL 501 X LOCK BASE LABEL 508 XLABEL-06 RESPIRATOR/GLASSES LABEL 502 X SHIFT GEARS LABEL 509 XLABEL-02 UNPLUG LABEL 503 X1742S503 MACHINE ID LABEL 510 X PINSTRIPE TAPE 504 XLABEL-03S KEEP CLOSED LABEL 511 X OIL HERE LABEL 505 X1742S505 W1742S LABEL 512 X ROTATION LABEL 506 XLABEL-08 READ MANUAL LABEL -11-
12 Model W " PLANER MANUAL UPDATE This update covers changes made to the machine after the owner's manual was printed. Keep this update with your owner's manual for future reference. If you have questions, contact Tech Support at (360) or by at Why the Update? We recently re-designed the Model W1742 motor and changed the capacitor wiring. Figure 1 shows the new motor wiring. New Parts for W1742 Figure 1. Model W1742 new motor and capacitor wiring. Figure 2. W1742 new motor breakdown. REF PART# DESCRIPTION 30A X A MOTOR3HP220VV A-1 X A-1 MOTORFANCOVERV A-2 X A-2 MOTORFANV A-4 X A-4 RCAP20MF400VAC 30A-5 X A-5 SCAP200MF250VAC 30A-6 X A-6 JUNCTIONBOXV #10610BL COPYRIGHT MARCH, 2008 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China
13 Woodstock International, Inc. P.O. Box 2309 Bellingham, WA Phone: (800) FAX: (360) Dear Valued Customer, Your new Shop Fox Model W " Planer may or may not have switch buttons with light bulbs inside. If your machine does have these type of switch buttons, the light bulb inside is not intended to be functional with your machine and is not wired as such, or displayed in the wiring diagram in your owner's manual. The buttons with bulbs start and stop the machine as intended, and they will not hinder the performance of your machine in any way. Sincerely, The Woodstock International Quality Control Team Woodstock International, Inc. P.O. Box 2309 Bellingham, WA Phone: (800) FAX: (360) Dear Valued Customer, Your new Shop Fox Model W " Planer may or may not have switch buttons with light bulbs inside. If your machine does have these type of switch buttons, the light bulb inside is not intended to be functional with your machine and is not wired as such, or displayed in the wiring diagram in your owner's manual. The buttons with bulbs start and stop the machine as intended, and they will not hinder the performance of your machine in any way. Sincerely, The Woodstock International Quality Control Team
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49 Model W " PLANER MANUAL UPDATE This update covers changes made to the machine after the owner's manual was printed. Keep this update with your owner's manual for future reference. If you have questions, contact Tech Support at (360) or by at Why the Update? We recently re-designed the Model W1742 motor and changed the capacitor wiring. Figure 1 shows the new motor wiring. New Parts for W1742 Figure 1. Model W1742 new motor and capacitor wiring. Figure 2. W1742 new motor breakdown. REF PART# DESCRIPTION 30A X A MOTOR3HP220VV A-1 X A-1 MOTORFANCOVERV A-2 X A-2 MOTORFANV A-4 X A-4 RCAP20MF400VAC 30A-5 X A-5 SCAP200MF250VAC 30A-6 X A-6 JUNCTIONBOXV #10610BL COPYRIGHT MARCH, 2008 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
MODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1692 15" PLANER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY
MODELS W1723 and W " PLANERS PARTS LIST
MODELS W1723 and W1724 15" PLANERS PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT DECEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
REF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
ST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
W1812 Owner's Manual (Mfd. Since 02/11) PARTS. Headstock 11V2 30V2 95V V2 8 25V2 41V2 25V2 23V2 27V2 PARTS -45-
-45- Headstock 20 21 23V2 8 25V2 23V2 25V2 26 28 87 88 57 56 40 47 39 39 37 46 33 34 42 63 13 2 93 93 71 70 69 17 41V2 92 30V2 31 32 7 38 35 33 34 37 40 43 16 11V2 1 4 5 9 61 62 61 62 18 10 3 8 19 14 95V2
W /2" Dovetail Machine PARTS. Table PARTS -36-
Table -36- Table Parts List 101 X1805101 FENCE 117 X1805117 INDICATOR TEMPLATE 1" & 2" 102 X1805102 SLIDING ROD 118 X1805118 INDICATOR TEMPLATE 1-1/2" & 2-1/2" 103 XPSB31M CAP SCREW M8-1.25 X 25 119 XPSB04M
M1110 Mill with Dovetail Column. Headstock PARTS -33-
-33- M1110 Mill with Dovetail Column 1012 1082 1083 1001 1084 1002 1003 1005 1006 1007 1008 1009 1010 1011 1097 1096 1095 1019 1017 1094 1073 1015 1081 1016 1013 1014 1018 1020 1021 1022 1023 1024 1025
READ THIS FIRST. Phone #: (360) Tech Support: Web:
READ THIS FIRST Model W1742/W1742S ***IMPORTANT UPDATE*** Applies to Models Mfd. Since 09/17 and Owner's Manuals Printed 01/06 Phone #: (360) 734-3482 Tech Support: techsupport@woodstockint.com Web: www.woodstockint.com
Lower Cabinet and Sanding Motor
Lower Cabinet and Sanding Motor -40- Parts List 1 X1751001 MACHINE BASE 38 X1751038 BRAKE PIN 2 X1751002 QUILL BASE 39 XPR47M EXT RETAINING RING 13MM 3 XPB32M HEX BOLT M10-1.5 X 25 40 XPLW06M LOCK WASHER
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
Main Breakdown. ST " Bandsaw -41-
Main Breakdown ST1000 14" Bandsaw -41- Main Breakdown Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XST1000001 MOTOR 3/4HP 110/220V 48 XPHTEK4M TAP SCREW M4 X 8 1-1 XST1000001-1 FAN COVER
D('00 D]^ ('&'. G8IKJ
![D('00 D]^ ('&'. G8IKJ](/thumbs/90/103707123.jpg "D('00 D]^ ('&'. G8IKJ")
1 2 5 6 7 8 11 12 10 13 14 15 27 28 16 26 29 30 25 17 19 20 22 21 32 23 24 31 42 43 33 34 40 41 35 49 36 37 51 52 53 44 45 46 47 38 39 48 18-40- 1 XM1099001 CONTROL PANEL FACE 29 XPCAP50M CAP SCREW M5-.8
MODEL W " WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1710 24" WIDE BELT SANDER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT SEPTEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
Model W1739 Variable Speed Planer Moulder Manual Insert
Model W1739 Variable Speed Planer Moulder Manual Insert READ and understand this W1739 manual insert and the W1693 instruction manual before using this machine. Ignoring this warning may lead to serious
W1756/W " Wide-Belt Sander PARTS. Electrical & Controls PARTS -57-
Electrical & Controls -57- Electrical & Controls Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 X1756001 ELECTRICAL CONTROL BOX 18 XPS51M PHLP HD SCR M4-.7 X 30 2 X1756002 HINGE 19 X1756019
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
15" PLANER MODEL G1021Z PARTS LIST
15" PLANER MODEL G1021Z PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL,
READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z
READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663
MODEL W " Jointer PARTS LIST
MODEL W1684 8" Jointer PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@woodstockint.com COPYRIGHT SEPTEMBER, 2002 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
Model W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-
3 144 1 143 119 1 4-1 14 140 13 4 1 1 4 14 11 7 108 134 131 13 14 100 1 8 16 9 80 93 40 14 146 39 Main Breakdown 133 117 130 10 3 19 3 11 10 9 38 9 7 6 4 13 7 134 16 138 141 Model W184 (For Machines Mfd.
READ THIS FIRST. Phone #: (360) Tech Support: Web:
READ THIS FIRST Model W1741S ***IMPORTANT UPDATE*** Applies to Models Mfd. Since 4/15 and Manual Insert Revised 5/08 Phone #: (360) 734-3482 Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz
Electrical Parts. Replaces Page 42. Model W1737/W1738 (Mfd. Since 1/14) (W1737 Only) 2V2 3V3 3-1V2 (W V.
Model W1737/W1738 (Mfd. Since 1/14) Replaces Page 42 Electrical Parts 7 6 8 17 15 15 35 16 10 20 26 18 23 12 38 (W1737 Only) 1 31 34 37 21 24 9 2V2 3V3 3-1V2 (W1738 440V Conversion Only) 39 25 14V2 12-1
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown Jointer Parts List 1 P0604001 HANDLE 43 PS68M PHLP HD SCR M6-1 X 10 2 P0604002 STUD 44 PW03M FLAT WASHER 6MM 3 P0604003 BUSHING 45 P0604045 BALL HANDLE
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
IMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
BUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
SECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
SECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
-36- Extreme Duty Planers
117 116 111 106 102 105 103 108 107 113 101 119 118 104 110 109 114 440v Conversion Kit 120-11 120 112 115 120-1 120-1 120-1 120-2 120-10 120-3 120-4 120-5 120-6 120-7 120-8 120-9 121-36- Extreme Duty
SECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
PARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
SECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
SECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
SECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
Parts List: Head Assembly
Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index
M1014 7" x 12" Metal Cutting Bandsaw PARTS -38-
14 13 15 16 18 17 55 10 12 11 19 54 9 20 53 7 5 4 60 7 3 1 28 6 2 61 23 27 26 29 21 24 25 22 32 32 33 35 36 37 38 49 48 47 40 39 34 30 59 51 52 46 45 44 43 42 42 41 50 56 57 58-38- Parts List 1 XM1014001
PARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
SECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V
SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18
Planer/Moulder Head USE helpers or power lifting equipment to lift this Planer/Moulder. Otherwise, serious personal injury may occur. To mount the Planer/Moulder head, do these steps: 1. Lay two 2x4 s
SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
G0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
Parts Breakdown G4030
Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-
G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
Headstock and Bow Breakdown (G0613)
SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
PARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
SECTION 9: PARTS. Table
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT The Model G0632Z is the same machine as the Model G0632 except it has a higher full-load current rating, a different inverter and inverter
SECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
SECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
G5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
SECTION 9: PARTS. Stand REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Stand 1 2 6 8 3 4 5 7 9 6 13 11 28 27 17 15 14 28 27 17 29 18 20 21 22 26 1 2 4 6 3 5 10 9 12 15 16 12 23 17 25 24 9 21 1 P0716001 HANDLE GRIP 16 P0716016 RIGHT LONG TOP BRACE 2 P0716002
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
GEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
The following change was recently made since the owner's manual was printed:
READ THIS FIRST Model G0531B/G0566B/ G0568/G0569 ***IMPORTANT UPDATE*** For Machines Mfd. Since 08/04 and Owner's Manual Revised 05/15 For questions or help with this product contact Tech Support at (570)
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
Model W1741 LIGHTED CONTROLS MANUAL UPDATE. Lighted Controls. Control Panel. Magnetic Switch
Model W1741 LIGHTED CONTROLS MANUAL UPDATE Improvements to this machine were made since the manual was originally printed, and this update covers those changes. Keep this update with your owner's manual
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
MODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
SECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
SECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
Parts List: Column Assembly
Column Assembly 39 Parts List: Column Assembly Index No. Part No. Description Size Qty 1... WP2510-401...Idler Support Base... 1 2... TS-1540071...Hex Nut...M10... 2 3... TS-1550061...Flat Washer...M8...
SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-0460224 Ph.: 800-274-6848 Revision
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS