G5959Z 12" Left-Tilting Table Saw -37-
|
|
|
- Aubrey Collins
- 5 years ago
- Views:
Transcription
1 Date Serial Number GROUND ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES A B A A B Disconnect Power Before Changing Blades or Performing Maintenance SPECIFICATIONS MOTOR: 5 HP, 220 V, SINGLE-PHASE MOTOR SPEED: 3450 RPM ARBOR SPEED: 4140 RPM MAXIMUM BLADE SIZE: 12" MAXIMUM WIDTH OF CUT: 50" MAXIMUM DEPTH OF 90 : 4" MAXIMUM DEPTH OF 45 : 2-5/8" MAXIMUM DADO WIDTH: 13/16" T-SLOT SIZE: 3/4" x 3/8" ARBOR SIZES: 5/8" & 1" TABLE HEIGHT: 34-1/2" WEIGHT: 357 LBS. Manufactured for Grizzly in Taiwan MODEL G5959Z 12'' LEFT-TILTING TABLE SAW FAILURE TO FOLLOW THESE WARNINGS WILL RESULT IN SERIOUS PERSONAL INJURY: 1. READ AND UNDERSTAND MANUAL BEFORE STARTING MACHINE. 2. ALWAYS WEAR EYE PROTECTION AND RESPIRATOR. 3. PLUG POWER CORD INTO GROUNDED OUTLET ONLY. 4. ALWAYS KEEP HANDS OUT OF THE PATH OF THE BLADE. 7. DISCONNECT POWER PRIOR TO SERVICING, CHANGING BLADES OR ADJUSTING FENCE OR MITER GAUGE. 5. KEEP ALL GUARDS IN PLACE AT ALL TIMES. 6. DO NOT WEAR LOOSE CLOTHING, GLOVES OR JEWELRY. SECURE LONG HAIR AND BUTTON ALL LONG SLEEVE SHIRTS. 8. DO NOT EXPOSE TO RAIN OR DAMPNESS. 9. DO NOT OPERATE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, OR WHEN TIRED. 10. MAKE SURE MACHINE IS PROPERLY ADJUSTED AND SET UP CORRECTLY BEFORE STARTING MOTOR. 11. BEFORE STARTING MACHINE, MAKE CERTAIN IT RESTS SECURELY ON FLAT, LEVEL 1 4" ABOVE THE WORKPIECE. 12. KNOW HOW TO AVOID KICKBACK. 13. DO NOT REMOVE JAMMED OR CUT-OFF WORKPIECE WHILE BLADE IS MOVING. 14. ALWAYS USE A PUSH STICK FOR "THROUGH" CUTS WITH NARROW WORKPIECES AND FOR ALL "NON-THROUGH" CUTS. 15. NEVER MAKE FREE-HAND CUTS. ALWAYS USE THE FENCE OR MITER. 16. NEVER USE FENCE AND MITER AT THE SAME TIME. ALWAYS REMOVE UNUSED DEVICE FROM TABLE TOP BEFORE STARTING MACHINE. 17. MAKE SURE BLADE HAS COME TO A COMPLETE STOP PRIOR TO MAKING ANY ADJUSTMENTS. 18. ALWAYS USE BLADE GUARD, SPLITTER AND ANTI-KICKBACK FINGERS WHEN MAKING "THROUGH" CUTS AND SET BLADE HEIGHT TO 19. PLAN CUTS SO THAT A LONG OR WIDE WORKPIECE IS PROPERLY SUPPORTED A A 80 G5959Z 12" Left-Tilting Table Saw -37-
2 A G5959Z 12" Left-Tilting Table Saw
3 G5959Z 12" Left-Tilting Table Saw -39-
4 A A A 5A -40- G5959Z 12" Left-Tilting Table Saw
5 203A G5959Z 12" Left-Tilting Table Saw -41-
6 ref part # description 001 pw13m flat WASHER 20mm 002 p BUSHING 003 p BUSHING 004 p5959z004 arbor NUT 1" 004A p5959z004a arbor Nut 5 8" 005 p BLADE FLANGE 1" 005A p a Blade Flange 5 8" 006 p5959z006 arbor adapter 1" 006A p5959z006a arbor adapter 5 8" 007 p5959z007 arbor 008 p6005 Ball bearing psb31m CAP SCREW M X pss20m SET SCREW M X p5959z011 arbor BRACKET 011a p5959z011a complete arbor bracket 012 pb02m HEX BOLT M6-1 X pn01m HEX NUT M pb14m HEX BOLT M X plw06m LOCK WASHER 10MM 016 pss02m SET SCREW M6-1 X p5959z017 INDICATOR BRACKET 018 p cap screw M5-.80 x p5959z019 INDICATOR 020 pw02m flat WASHER 5MM 021 ps05m phlp HD SCr M5-.8 x p COLLAR 023 p COLLAR 024 prp22m ROLL PIN 4 x p LIMIT STUD 026 p TILT ADJUSTMENT SHAFT 027 p5959z027 front TRUNNION BRACKET 028 pk23m KEY 5 X 5 X p washer 28mm 030 p5959z030 front TRUNNION 031 pn03m HEX NUT M psb40m CAP SCREW M X psb40m CAP SCREW M X p pivot SHAFT 035 pb103m HEX BOLT M x pw06m flat WASHER 12MM 037 p COTTER PIN 038 pk33m KEY 5 X 5 X pss02m SET SCREW M6-1 X p DRIVE PULLEY 041A pr10m EXT retaining ring 22mm 042 p BEARING WASHER 043 p6204 Ball bearing p STar WASHER 20mm 045 p LOCKING NUT 20MM 046 p COVER ref part # description 047 PSB26M CAP SCREW M6-1 X p5959z048 DUST DEFLECTOR 049 ps05m phlp HD SCr M5-.8 x psb58m CAP SCREW M x pw01m flat WASHER 8MM 052 p5959z052 front SUPPORT BRACKET 053 psb26m CAP SCREW M6-1 X plw05m LOCK WASHER 12MM 055 pn09m HEX NUT M psb64m CAP SCREW M x A p5959z057a Ball PIN 8 X p5959z058 REAR TRUNNION BRACKET 059A p5959z059a Ball PIN 8 X p5959z060 arm 061 pss02m SET SCREW M6-1 X p5959z062 motor MOUNT SUPPORT 063 pb20m HEX bolt M X pn03m HEX NUT M p KEY 5 X 5 X 75mm 066 p SHAFT 067 pw13m flat WASHER 20mm 068 p worm GEAR 069 plw06m LOCK WASHER 10MM 070 pn02m HEX NUT 10MM 071 p5959z071 motor MOUNT PLATE 072 pb01m HEX BOLT m x p BEARING DUST DEFLECTOR 074 p51104 Thrust bearing p5959z075 HEIGHT ADJUSTMENT SHAFT 076 pr19m EXT retaining ring 28mm 077 p REAR TRUNNION BRACKEt 078 pw02m HEX NUT 10MM 080 p motor PULLEY 080a pk41m Key 8 x 8 x pss02m SET SCREW M6-1 X pva28 V-BELT A-28 4L p5959z083 ARBOR EXTENSION DADO 5 /8" 092 p Complete miter gauge 101A p5959z101a Right Wing 101B p5959z101a Left Wing 102 pb14m HEX BOLT M X plw06m LOCK WASHER 10MM 106 p5959z106 BLADE INSERT 107 pss03m SET SCREW M6-1 X p5959z108 TABLE 109 p5959z109 BASE 110 p5959z110 INDICATOR PLATE 111 ps34 phlp HD SCR M3-.5 X p LINE CORD - Short 115 plw06m LOCK WASHER 10MM -42- G5959Z 12" Left-Tilting Table Saw
7 ref part # description ref part # description 116 PB01M HEX BOLT M X PB26M HEX BOLT M X p magnetic SWITCH 215 p RAIL SPACER 118 ps05m phlp HD SCr M5-.8 x p NYLON BLOCK 122 p LINE CORD - long 217 ps20m phlp HD SCR M5-.8 X p5959z123 DOOR 218 p ROUND KNOB 125 p Strain relief 219 p LOCK HANDLE 126 p LOCKING KNOB 220 p TEFLON PAD 128A p a CRANK HANDLE 221 p fence LOCK 130 p HANDWHEEL 222 pln01 LOCK NUT 3 /8" psb14m CAP SCREW M X pb25 HEX BOLT 3 /8"-16 X 1 3/4 132 p SHIELD PLATE 224 pln03m LOCK NUT M pss02m SET SCREW M6-1 X pb29m CAP SCREW M6-1.0 x p STRain relief 226 p HAIRLINE INDICATOR 134A P a wiring BOX 227 p INDICATOR BRACKET 134B p b STRAIN RELIEF 228 ps05m phlp HD SCR M5-.8 x p GUARD SUPPORT ROD 229 pw02m flat WASHER 5MM 137a p a complete guard support 230 pss16m SET SCREW M X pb07m HEX BOLT M X p NYLON ADJUSTING SCREW 139 pw01m flat WASHER 8MM 301 p Handle 140 p GUard SUPPORT (UPPER) 302 pw04m flat WASHER 10MM 141 plw04m LOCK WASHER 8MM 303 p miter BAR 142 p GUard SUPPORT (LOWER) 304 p miter BODY 143 pw01m flat WASHER 8MM 305 ps06m phlp HD SCR M5-.8 x pb06m HEX BOLT M X p INDICATOR 151 pss03m SET SCREW M6-1.0 X p STOP 152 p5959z152 DADO INSERT 308 pss02m SET SCREW M6-1 X p5959z153 motor 309 pss26m SET SCREW M5-.8 X pc800 Capacitor 800mfd 125v 310 p SPECIAL WASHER p Capacitor cover 311 pfh04m flat HD SCR M6-1 X p motor fan 312 pln02m LOCK NUT M p motor fan cover 313 p SCALE p CONNECTION block 329 p GUard warning label pcp001 CONTact plt, sm, ext pt 330 p5959z330 MACHINE ID/WARNING LABEL pcs004 CENT switch 3/ plabel-11 SAFETY GLASSES LABEL 200 p COMPLETE FENCE ASSY. 332 plabel-26 UNPLUG LABEL 201 p front RAIL 333 plabel-12 READ MANUAL LABEL 202 p BACK RAIL 334 plabel-14 ELECTRICITY LABEL 203 p SQUARE TUBE 335 p CAST LOGO 203A p a TUBE END CAP 401 p RETainer 204 G3121 TAPE SCALE 402 p GUard 205 pb03m HEX BOLT M X p Support arm 206 plw04m LOCK WASHER 8MM 404 p pin 207 pfh08m flat HD SCR M X p Spring 208 p fence SIDE 406 p Blade splitter 208A p a fence END CAP 408 p pin 209 p main FENCE BODY 409 p5959z409 pawl 210 pb74m HEX BOLT M x p RETainer 211 pw04m flat WASHER 10MM 411 p pin 212 plw06m LOCK WASHER 10MM 412 prp42m ROLL PIN 3 X pn02m HEX NUT M G5959Z 12" Left-Tilting Table Saw -43-
15" PLANER MODEL G1021Z PARTS LIST
15" PLANER MODEL G1021Z PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL,
SECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
SECTION 11: PARTS Main
SECTION 11: PARTS Main 55 48 21 20 22 7 18 19 23 17 17 18 21 22 14 15 16 32 33 34 26 27 50 49 13 47 35 2 18 20 55A 12 11 8 10 45 46 3 38 37 44 53 36 51 42 25 30 29 28 43 99 103 98 100 52 101 5 4 58 57
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
SECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
REF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
POWER FEEDER MODEL G1128 AND MODEL G1129 PARTS LIST
POWER FEEDER MODEL G1128 AND MODEL G1129 PARTS LIST COPYRIGHT 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
SECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown Jointer Parts List 1 P0604001 HANDLE 43 PS68M PHLP HD SCR M6-1 X 10 2 P0604002 STUD 44 PW03M FLAT WASHER 6MM 3 P0604003 BUSHING 45 P0604045 BALL HANDLE
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
SECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
MODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,
Parts Breakdown G4030
Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
G8146Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
SECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
Headstock and Bow Breakdown (G0613)
SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
PARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
Main Parts. -4- Model G0555LANV (Mfg. Since 1/13) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 50 51 55 56 57 70 49 69 64 48 62 16 61 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34V2 194 186 6 68 24 115 116
SECTION 8: PARTS Cabinet Breakdown
SECTION 8: PARTS Cabinet Breakdown G0641 Double Miter Saw -39- Cabinet Parts List 1 P0641001 SAFETY HOOD 17 PB03M HEX BOLT M8-1.25 X 16 2 P0641002 FRONT GUARD 18 PW01M FLAT WASHER 8MM 3 PW01M FLAT WASHER
Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V
SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
SECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
SECTION 9: PARTS. Table
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
SECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
G8145Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8145Z Cabinet Breakdown & Parts List 14 11 12 16 18 8 10 15 17 9 13 21 22 19 20 24 25 7 4 3 5 6 23 2 19 20 27 28 26 1 1 P8145Z001 WHEEL DOOR LOWER 15 P8145Z015
PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
G0614 Control Box Parts
G0614 Control Box Parts 247V2 250V3 251V3 252V3-1 246V2 252V3 253V2 256V2 254V2 255V2 257V2 246V2 P0614246V2 FUSE HOUSING GIKO KA FSB102-1-2 V2.07.06 253V2 P0614253V2 ON BUTTON AP-PBF-22-1/0G V2.07.06
Model W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-
3 144 1 143 119 1 4-1 14 140 13 4 1 1 4 14 11 7 108 134 131 13 14 100 1 8 16 9 80 93 40 14 146 39 Main Breakdown 133 117 130 10 3 19 3 11 10 9 38 9 7 6 4 13 7 134 16 138 141 Model W184 (For Machines Mfd.
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
SECTION 9: PARTS. Stand REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Stand 1 2 6 8 3 4 5 7 9 6 13 11 28 27 17 15 14 28 27 17 29 18 20 21 22 26 1 2 4 6 3 5 10 9 12 15 16 12 23 17 25 24 9 21 1 P0716001 HANDLE GRIP 16 P0716016 RIGHT LONG TOP BRACE 2 P0716002
SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
-36- Extreme Duty Planers
117 116 111 106 102 105 103 108 107 113 101 119 118 104 110 109 114 440v Conversion Kit 120-11 120 112 115 120-1 120-1 120-1 120-2 120-10 120-3 120-4 120-5 120-6 120-7 120-8 120-9 121-36- Extreme Duty
G0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
BUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
SECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
ST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
MODEL W " Jointer PARTS LIST
MODEL W1684 8" Jointer PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@woodstockint.com COPYRIGHT SEPTEMBER, 2002 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL
-58- G1023SL Series Table Saw 16 19 20 21 216 220 221 217 222 17 18 19 20 21 22 23 24 25 26 30A 30B 26A 26A 27A 28 27 27 68 26A 22 23 27 27 28 24 25 29B 29A 30 30 31 31 32 33 35C 37B 35A 35B 35D 36 37A
IMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
SECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
SECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
SECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
PARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
SECTION 10: PARTS. Body. 440V Conversion Kit
SECTION 10: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
PARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
Main Breakdown. ST " Bandsaw -41-
Main Breakdown ST1000 14" Bandsaw -41- Main Breakdown Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XST1000001 MOTOR 3/4HP 110/220V 48 XPHTEK4M TAP SCREW M4 X 8 1-1 XST1000001-1 FAN COVER
Parts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
SECTION 9: Parts Housing Parts
SECTION 9: Parts Housing Parts -46- G0504 16" Horizontal Resaw Bandsaw Housing Parts List REF PART # DESCRIPTION 1101 PB27M HEX BOLT M12-1.75 X 30 1102 PLW05M LOCK WASHER 12MM 1103 PW06M FLAT WASHER 12MM
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
Repair Parts. Parts List for RIDGID 10 Inch Table Saw Model No. TS Figure 1. RIDGID parts are available on-line at
Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure 0 0 0 0 See Figure 0 See Figure 0 See Figure Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure Always Order by Part Number - not by Number
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
MODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1692 15" PLANER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY
SECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
Base Machine Breakdown
SECTION 9: PARTS Base Machine Breakdown 154 151 10 149 8 180 9 11 152 148 12 6 146 153 23 150 7 144 4 147 142 181 2 140 100 139 145 1 143 36 14 141 19 15 182 31 137 16 32 18 13 3 34 16 19 17 41 41 50 38
Symptom Possible Cause Correction. Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection.
Saw blade Blade guard Troubleshooting Symptom Possible Cause Correction Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection. Inspect all lead
GEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
Headstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION
For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
PLATINUM SERIES TABLESAW W/DOVETAIL MECH LEFT-TILT MANUAL
PLATINUM SERIES TABLESAW W/DOVETAIL MECH LEFT-TILT MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
The following change was recently made since the owner's manual was printed:
READ THIS FIRST Model G0531B/G0566B/ G0568/G0569 ***IMPORTANT UPDATE*** For Machines Mfd. Since 08/04 and Owner's Manual Revised 05/15 For questions or help with this product contact Tech Support at (570)
SECTION 9: PARTS Lower Frame
SECTION 9: PARTS Lower Frame 47 39 5 5 4 1 3 6 7 6 1 9 13 4 3 48 2 19 1 17 1 18 1 15 16 11 14 6 1 8 12 11 1 13 2 6 1 10 27 25 30 22 23 26 31 33 32 24 26 34 25 28 29 35 31 36 32 37 40 42 41 21 20 43 38
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
MODEL T " BENCH SHEAR INSTRUCTIONS
MODEL T10051 12" BENCH SHEAR INSTRUCTIONS 1. Overloading this tool can cause injury from flying parts if the tool breaks. Do not exceed the tool capacities. 2. NEVER operate the bench shear without the
J-3-D PART NO DATE:
37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET