READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
|
|
|
- Patrick Harris
- 5 years ago
- Views:
Transcription
1 READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) or The following changes were recently made to this machine since the owner's manual was printed: Added an additional spindle enclosure guard. Changed spindle cartridge support fasteners. Aside from this information, all other content in the owner's manual applies and MUST be read and understood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference. For questions or help, contact our Tech Support at (570) or New Parts New Inventory Inventory Qty A. Front Spindle Enclosure Guard... 1 B. Front Guard Extension Plate... 1 C. V-Belt A28 (G8621)... 1 D. Knob Bolts 1 4"-20 x 1 2"... 4 E. Flat Washers 1 4"... 4 F. Knob Bolts 3 8"-16 x 1" (G5912Z, G7214Z). 2 F. Knob Bolts 3 8"-16 x 1" (G8621)... 4 REF PART # DESCRIPTION 7 P5912Z007 HEX NUT 3/ P5912Z008 LOCK WASHER 3/8 52 P5912Z052 FLAT WASHER 1/4 103 P5912Z103 SET SCREW 3/8-16 X P5912Z104 SET SCREW 3/8-16 X 1/2 168 P5912Z168 KNOB BOLT 1/4-20 X 1/2 169 P5912Z169 FRONT GUARD EXTENSION PLATE 170 P5912Z170 FRONT SPINDLE ENCLOSURE GUARD A D B E F C COPYRIGHT MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL18759 PRINTED IN TAIWAN
2 Attaching Spindle Enclosure Guard Before attaching the spindle enclosure guard, follow instructions in the Owner's Manual for installing the cutter guard and attaching the safety guard (for G5912Z/G7214Z, see Pages 18 19; for G8621, see Pages 14 15). To attach spindle enclosure guard: 1. Attach front guard extension plate to threaded holes on front of safety guard with (2) 1 4"- 20 x 1 2" knob bolts and (2) 1 4" flat washers (see Figure 1). 2. Attach front spindle enclosure guard to extension plate with (2) 1 4"-20 x 1 2" knob bolts and (2) 1 4" flat washers, (see Figure 1). Spindle Enclosure Guard Positioning The spindle enclosure guard protects the user from exposure to the cutter and chips thrown by it. To minimize the risk of injury, the spindle enclosure guard must be adjusted so it encloses as much of the spindle area as possible, while still allowing the workpiece to pass through the cut. Typically this means the front guard is positioned to just clear the top of the workpiece. To position the spindle enclosure guard, loosen the top knob bolts and slide the extension plate in or out, then loosen the front knob bolts and raise or lower the spindle enclosure guard as needed. Tighten the knob bolts to secure the setting. Front Guard Extension Plate 1 4" Flat Washer 1 4"-20 x 1 2" Knob Bolt Front Spindle Enclosure Guard Safety Guard Figure 1. Front guard extension plate and spindle enclosure guard attached to safety guard. All guards MUST be installed on your shaper before operating it. Shapers can quickly cause serious injury if some kind of guard is not used. To reduce your risk of injury, read and follow the entire Owner's Manual carefully and do additional research on shop made guards and safety jigs. -2- G5912Z G8621 Update (Mfd. Since 1/17)
3 Cabinet Model G5912Z/G7214Z (Mfd. Since 03/13) -37-
4 Cabinet Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P5912Z001 SET SCREW 5/16-18 X 5/8 18 P5912Z018 TERMINAL BOX ASSY 2 P5912Z002 TABLE 18A P5912Z018A TERMINAL BOX W/O BUSBAR 3 P5912Z003 INSERT (SMALL) INNER 19 P5912Z019 STRAIN RELIEF M14.5 TYPE-6 ST 4 P5912Z004 INSERT (MID) 21 P5912Z021 STRAIN RELIEF 5 P5912Z005 INSERT (BIG) 22B P5912Z022B ELECTRICAL BOX ASSY (G5912Z) 6 P5912Z006 STAND ASSY 22B-1 P5912Z022B-1 CONTACTOR (G5912Z) 6-1 P5912Z006-1 DEGREE SCALE 22B-1 P7214Z022B-1 CONTACTOR (G7214Z) 7 P5912Z007 HEX NUT 3/ B-2 P5912Z022B-2 OVERLOAD RELAY (G5912Z) 8 P5912Z008 LOCK WASHER 3/8 22B-2 P7214Z022B-2 OVERLOAD RELAY (G7214Z) 9 P5912Z009 FLAT WASHER 3/8 22V2 P7214Z022V2 SWITCH BOX ASSEMBLY V (G7214Z) 10 P5912Z010 TABLE BRACE (R) 23 P5912Z023 TABLE BRACE (L) 11 P5912Z011 HEX NUT P5912Z024 MITER GAUGE 12 P5912Z012 PHLP HD SCR 1/4-20 X 5/8 128 P5912Z128 RESET SWITCH 13 P5912Z013 REMOVABLE DUST DOOR 129 P5912Z129 POWER INDICATOR LIGHT ZD-10 RED 14 P5912Z014 HEX BOLT 3/8-16 X 1-1/4 156A P7214Z156A 440V CONVERSION KIT (G7214Z) 15 P5912Z015 HEX BOLT 3/8-16 X 3/4 156A-1 P7214Z156A-1 440V MAG CONTACTOR (G7214Z) 16 P5912Z016 MOTOR COVER 156A-2 P7214Z156A-2 440V THERMAL PROTECTOR (G7214Z) 17 P5912Z017 PHLP HD SCR X 3/4 156A-3 P7214Z156A-3 440V LIGHT BULB (G7214Z) -38- Model G5912Z/G7214Z (Mfd. Since 03/13)
5 Spindle A 41A 42A 42B 43A 44A 44B 45A 45B 46A 46B 36A 36B Model G5912Z/G7214Z (Mfd. Since 03/13) -39-
6 Spindle Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 28 P5912Z028 LOCK BOLT 3/ B P5912Z042B COLLAR 3/4" X 1/4" 29 P5912Z029 TAPER LOCK NUT 43 P5912Z043 COLLAR 1-1/4" X 3/8" (1PC) 30 P5912Z030 BALL BEARING 6008ZZ 43A P5912Z043A COLLAR 1" X 3/8" 31 P5912Z031 EXT RETAINING RING 40MM 44 P5912Z044 COLLAR 1-1/4" X 1/2" (2PC) 33 P5912Z033 PULLEY SPINDLE 44A P5912Z044A COLLAR 1" X 1/2" 36 P5912Z036 SPINDLE 1-1/4 44B P5912Z044B COLLAR 3/4" X 1/2" 36A P5912Z036A SPINDLE 3/4" 45 P5912Z045 COLLAR 1-1/4" X 3/4" (2PC) 36B P5912Z036B SPINDLE 1" 45A P5912Z045A COLLAR 1" X 3/4" (2PC) 37-1 P5912Z037-1 PULLEY AND QUILL ASSEMBLY 45B P5912Z045B COLLAR 3/4" X 3/4" (2PC) 37A P5912Z037A SPINDLE CARTRIDGE ASSY V P5912Z046 COLLAR 1-1/4" X 1" (2PC) 38 P5912Z038 KEY 7 X 7 X 40 46A P5912Z046A COLLAR 1" X 1" (2PC) 39A P5912Z039A QUILL 7-3/4" LONG V B P5912Z046B COLLAR 3/4" X 1" (2PC) 40 P5912Z040 HEX NUT 3/4-16 LH (FOR 1" AND 1-1/4" SPINDLES) 161 P5912Z161 EXT RETAINING RING 50MM 40A P5912Z040A HEX NUT 5/8-18 LH (FOR 3/4" SPINDLE) 162 P5912Z162 CAP SCREW M4-.7 X P5912Z041 HEX NUT 1-14 (FOR 1" AND 1-1/4" SPINDLES) 163 P5912Z163 OUTER DUST COVER 41A P5912Z041A HEX NUT 3/4-16 (FOR 3/4" SPINDLE) 164 P5912Z164 INNER DUST COVER 42 P5912Z042 COLLAR 1-1/4" X 1/4" (1PC) 165 P5912Z165 WAVY WASHER 42A P5912Z042A COLLAR 1" X 1/4" 166 P5912Z166 WAVY WASHER -40- Model G5912Z/G7214Z (Mfd. Since 03/13)
7 Motor A 80-5 G5912Z G7214Z Model G5912Z/G7214Z (Mfd. Since 03/13) -41-
8 Motor Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 7 P5912Z007 HEX NUT 3/ P5912Z072 KEY 7 X 7 X 50 8 P5912Z008 LOCK WASHER 3/8 73 P5912Z073 MOTOR PULLEY 9 P5912Z009 FLAT WASHER 3/8 74 P5912Z074 HEX BOLT 3/8-16 X 1-1/2 14 P5912Z014 HEX BOLT 3/8-16 X 1-1/4 75 P5912Z075 FLAT WASHER 5/16 15 P5912Z015 HEX BOLT 3/8-16 X 3/4 76 P5912Z076 LOCK WASHER 5/16 39A P5912Z039A QUILL 7-3/4" LONG V P5912Z077 CAP SCREW 5/16-18 X 1 50 P5912Z050 HEX BOLT 1/4-20 X 5/8 78 P5912Z078 COMPRESSION SPRING 3.4 X P5912Z051 LOCK WASHER 1/4 79 P5912Z079 KEY 3/8 X 3/4 X 1 52 P5912Z052 FLAT WASHER 1/4 81 P5912Z081 SHAFT 53 P5912Z053 LOCK KNOB 82 P5912Z082 FLAT WASHER 1/2 54 P5912Z054 BAR LOCK 83 P5912Z083 MOTOR BASE 55 P5912Z055 HEX NUT 5/ P5912Z084 KNOB 56 P5912Z056 HEX BOLT 5/16-18 X 1 85 P5912Z085 LOCK WASHER 1/2 57 P5912Z057 SCREW LOCK 86 P5912Z086 HEX BOLT 1/2-20 X 1 58 P5912Z058 WASHER GEAR 87 P5912Z087 POINTER 59 P5912Z059 GEAR 88 P5912Z088 PHLP HD SCR X 3/8 60 P5912Z060 COLLAR 89 P5912Z089 HEX BOLT 5/16-18 X 3/4 61 P5912Z061 KEY 4 X 4 X P5912Z090 SHAFT GUIDE 62 P5912Z062 BASE GEAR SHAFT 91 P5912Z091 PLATE 63 P5912Z063 SHAFT GEAR 92 P5912Z092 MOTOR PLATE 64 P5912Z064 BASE SPINDLE 93 P5912Z093 SHAFT GEAR 65 P5912Z065 FLAT WASHER 1/2 94 P5912Z094 BASE GEAR SHAFT 66 P5912Z066 LOCK NUT 1/2" P5912Z095 METAL HANDWHEEL 67 P5912Z067 CAP SCREW 3/8-16 X 1-1/4 96 P5912Z096 HANDLE 68 P5912Z068 SCREW 3/8-16 X 1-1/4 97 P5912Z097 HEX BOLT 1/4-20 X 1-1/4 69 P5912Z069 COLLAR 98 P5912Z098 HEX NUT 1/ P5912Z070 V-BELT A P5912Z102 SET SCREW X 3/16 71 P5912Z071 V-BELT A28 G5912Z 5HP, 1-PH MOTOR 80 P5912Z080 MOTOR 5HP 220V 1-PH 80-1 P5912Z080-1 MOTOR FAN COVER 80-2 P5912Z080-2 MOTOR FAN 80-3 P5912Z080-3 CAPACITOR COVER 80-4 P5912Z080-4 MOTOR JUNCTION BOX 80-5 P5912Z080-5 CENT SWITCH 1/ P5912Z080-6 CONTACT PLT-TUNGSTEN 5HP 80-7 P5912Z080-7 S CAPACITOR 400M 125V 1-3/4 X 3-3/ P5912Z080-8 R CAPACITOR 50M 250V 1-3/4 X 2-3/ P5912Z080-9 REAR MOTOR BEARING P5912Z FRONT MOTOR BEARING G7214Z 7 1 2HP, 3-PH MOTOR 80 P7214Z080 MOTOR 7.5HP 220V 3-PH 80-1 P7214Z080-1 MOTOR FAN COVER 80-2 P7214Z080-2 MOTOR FAN 80-3 P7214Z080-3 MOTOR JUNCTION BOX -42- Model G5912Z/G7214Z (Mfd. Since 03/13)
9 Fence Guard 119A 105AV3 105AV3 Model G5912Z/G7214Z (Mfd. Since 03/13) -43-
10 Fence Guard Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 119A P5912Z119A COMPLETE FENCE ASSEMBLY 113 P5912Z113 CUTTER GUARD 51 P5912Z051 LOCK WASHER 1/4 114 P5912Z114 SET SCREW 1/4-20 X 1/4 52 P5912Z052 FLAT WASHER 1/4 115 P5912Z115 BRACKET ASSY FENCE RH 55 P5912Z055 HEX NUT 5/ A P5912Z116A WOOD FENCE (RIGHT) 76 P5912Z076 LOCK WASHER 5/16 116B P5912Z116B WOOD FENCE (LEFT) 82 P5912Z082 FLAT WASHER 1/2 117 P5912Z117 FLAT HD SCR 5/16-18 X 1-1/2 89 P5912Z089 HEX BOLT 5/16-18 X 3/4 118 P5912Z118 HOLD DOWN PLATE 97 P5912Z097 HEX BOLT 1/4-20 X 1-1/4 119 P5912Z119 GUARD/DUST HOOD 98 P5912Z098 HEX NUT 1/ P5912Z120 BAR 105AV3 P5912Z105AV3 ADJ HANDLE 3"L 1/2-12 X 1-9/16 V P5912Z121 RETAINER (L) 5/8" 106 P5912Z106 BRACKET SCREW GUIDE 122A P5912Z122A KNOB BOLT 3/8-16 X 1 V P5912Z107 SCREW GUIDE ASSY 123 P5912Z123 NUT 3/8 107A P5912Z107A HANDWHEEL 124 P5912Z124 RETAINER (S) 1/2" 108 P5912Z108 BALL KNOB 3/8-16 (PLASTIC) 125 P5912Z125 KNOB 109 P5912Z109 SHAFT GUIDE 126 P5912Z126 BRACKET ASSY FENCE LH 110 P5912Z110 BAR 127 P5912Z127 HEX BOLT 1/4-20 X 1-1/2 111 P5912Z111 KNOB 5/16-18 V1 167 P5912Z167 KNOB BOLT 3/8-16 X P5912Z112 FLAT WASHER 5/ Model G5912Z/G7214Z (Mfd. Since 03/13)
11 Labels & Cosmetics REF PART # DESCRIPTION REF PART # DESCRIPTION 400 P5912Z400 G5912Z MACHINE ID LABEL 410 P5912Z410 ROTATION DIRECTION LABEL 400 P7214Z400 G7214Z MACHINE ID LABEL 411 P5912Z411 SAFETY GLASSES LABEL 401 P5912Z401 GRIZZLY NAME PLATE 412 P5912Z412 HAND NEAR CUTTER LABEL 402 P5912Z402 PULLEY LABEL 413 P5912Z413 UNPLUG LABEL 403 P5912Z403 SPEED CHANGE LABEL 414 P5912Z414 ELECTRICITY LABEL 408 P5912Z408 READ MANUAL LABEL 415 P5912Z415 LARGE ELECTRICITY LABEL 409 P5912Z409 SCALE LABEL 416 P5912Z416 "GRIZZLY GREEN" TOUCH-UP PAINT Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) or Model G5912Z/G7214Z (Mfd. Since 03/13) -45-
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z
READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
PARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
IMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
SECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
REF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
SECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
SECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
G5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
SECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
BUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
SECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
Main Breakdown. ST " Bandsaw -41-
Main Breakdown ST1000 14" Bandsaw -41- Main Breakdown Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XST1000001 MOTOR 3/4HP 110/220V 48 XPHTEK4M TAP SCREW M4 X 8 1-1 XST1000001-1 FAN COVER
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
G8146Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26
SECTION 9: PARTS. Table
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
SECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
SECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown Jointer Parts List 1 P0604001 HANDLE 43 PS68M PHLP HD SCR M6-1 X 10 2 P0604002 STUD 44 PW03M FLAT WASHER 6MM 3 P0604003 BUSHING 45 P0604045 BALL HANDLE
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
SECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
Column & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
SECTION 8: PARTS Cabinet Breakdown
SECTION 8: PARTS Cabinet Breakdown G0641 Double Miter Saw -39- Cabinet Parts List 1 P0641001 SAFETY HOOD 17 PB03M HEX BOLT M8-1.25 X 16 2 P0641002 FRONT GUARD 18 PW01M FLAT WASHER 8MM 3 PW01M FLAT WASHER
PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
W /2" Dovetail Machine PARTS. Table PARTS -36-
Table -36- Table Parts List 101 X1805101 FENCE 117 X1805117 INDICATOR TEMPLATE 1" & 2" 102 X1805102 SLIDING ROD 118 X1805118 INDICATOR TEMPLATE 1-1/2" & 2-1/2" 103 XPSB31M CAP SCREW M8-1.25 X 25 119 XPSB04M
Main Parts. -4- Model G0555LANV (Mfg. Since 1/13) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 50 51 55 56 57 70 49 69 64 48 62 16 61 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34V2 194 186 6 68 24 115 116
G8145Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8145Z Cabinet Breakdown & Parts List 14 11 12 16 18 8 10 15 17 9 13 21 22 19 20 24 25 7 4 3 5 6 23 2 19 20 27 28 26 1 1 P8145Z001 WHEEL DOOR LOWER 15 P8145Z015
SECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
SECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT The Model G0632Z is the same machine as the Model G0632 except it has a higher full-load current rating, a different inverter and inverter
SECTION 10: PARTS. Body. 440V Conversion Kit
SECTION 10: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
SECTION 11: PARTS Main
SECTION 11: PARTS Main 55 48 21 20 22 7 18 19 23 17 17 18 21 22 14 15 16 32 33 34 26 27 50 49 13 47 35 2 18 20 55A 12 11 8 10 45 46 3 38 37 44 53 36 51 42 25 30 29 28 43 99 103 98 100 52 101 5 4 58 57
Model W1739 Variable Speed Planer Moulder Manual Insert
Model W1739 Variable Speed Planer Moulder Manual Insert READ and understand this W1739 manual insert and the W1693 instruction manual before using this machine. Ignoring this warning may lead to serious
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
SECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
Model W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-
3 144 1 143 119 1 4-1 14 140 13 4 1 1 4 14 11 7 108 134 131 13 14 100 1 8 16 9 80 93 40 14 146 39 Main Breakdown 133 117 130 10 3 19 3 11 10 9 38 9 7 6 4 13 7 134 16 138 141 Model W184 (For Machines Mfd.
SECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
The following change was recently made since the owner's manual was printed:
READ THIS FIRST Model G0531B/G0566B/ G0568/G0569 ***IMPORTANT UPDATE*** For Machines Mfd. Since 08/04 and Owner's Manual Revised 05/15 For questions or help with this product contact Tech Support at (570)
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS
MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
SECTION 9: PARTS. Stand REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Stand 1 2 6 8 3 4 5 7 9 6 13 11 28 27 17 15 14 28 27 17 29 18 20 21 22 26 1 2 4 6 3 5 10 9 12 15 16 12 23 17 25 24 9 21 1 P0716001 HANDLE GRIP 16 P0716016 RIGHT LONG TOP BRACE 2 P0716002
Parts Breakdown G4030
Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
G0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
MODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,
D('00 D]^ ('&'. G8IKJ
![D('00 D]^ ('&'. G8IKJ](/thumbs/90/103707123.jpg "D('00 D]^ ('&'. G8IKJ")
1 2 5 6 7 8 11 12 10 13 14 15 27 28 16 26 29 30 25 17 19 20 22 21 32 23 24 31 42 43 33 34 40 41 35 49 36 37 51 52 53 44 45 46 47 38 39 48 18-40- 1 XM1099001 CONTROL PANEL FACE 29 XPCAP50M CAP SCREW M5-.8
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
PARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
Model W1742S 15" Planer with Spiral Cutterhead Manual Insert
Model W1742S 15" Planer with Spiral Cutterhead Manual Insert Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz The Model W1742S is the same as the Model W1742,
ST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
W1812 Owner's Manual (Mfd. Since 02/11) PARTS. Headstock 11V2 30V2 95V V2 8 25V2 41V2 25V2 23V2 27V2 PARTS -45-
-45- Headstock 20 21 23V2 8 25V2 23V2 25V2 26 28 87 88 57 56 40 47 39 39 37 46 33 34 42 63 13 2 93 93 71 70 69 17 41V2 92 30V2 31 32 7 38 35 33 34 37 40 43 16 11V2 1 4 5 9 61 62 61 62 18 10 3 8 19 14 95V2
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
MODELS W1723 and W " PLANERS PARTS LIST
MODELS W1723 and W1724 15" PLANERS PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT DECEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
MODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1692 15" PLANER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY
MODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27696 12" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T27696 indexable
SECTION 9: PARTS Lower Frame
SECTION 9: PARTS Lower Frame 47 39 5 5 4 1 3 6 7 6 1 9 13 4 3 48 2 19 1 17 1 18 1 15 16 11 14 6 1 8 12 11 1 13 2 6 1 10 27 25 30 22 23 26 31 33 32 24 26 34 25 28 29 35 31 36 32 37 40 42 41 21 20 43 38
J-3-D PART NO DATE:
37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET
Disc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
MODEL W " WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1710 24" WIDE BELT SANDER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT SEPTEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS
MODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17
MODEL T128 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 For questions or help with this product contact Tech Support at (570) 56-966 or techsupport@grizzly.com Introduction The Model T128
M1110 Mill with Dovetail Column. Headstock PARTS -33-
-33- M1110 Mill with Dovetail Column 1012 1082 1083 1001 1084 1002 1003 1005 1006 1007 1008 1009 1010 1011 1097 1096 1095 1019 1017 1094 1073 1015 1081 1016 1013 1014 1018 1020 1021 1022 1023 1024 1025
MODEL T " BENCH SHEAR INSTRUCTIONS
MODEL T10051 12" BENCH SHEAR INSTRUCTIONS 1. Overloading this tool can cause injury from flying parts if the tool breaks. Do not exceed the tool capacities. 2. NEVER operate the bench shear without the
-36- Extreme Duty Planers
117 116 111 106 102 105 103 108 107 113 101 119 118 104 110 109 114 440v Conversion Kit 120-11 120 112 115 120-1 120-1 120-1 120-2 120-10 120-3 120-4 120-5 120-6 120-7 120-8 120-9 121-36- Extreme Duty
Inventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure