MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
|
|
|
- Mae Taylor
- 6 years ago
- Views:
Transcription
1 MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences noted in this insert, all other content in the Model G0705 owner's manual applies to this machine. Before operating your new machine, you MUST read and understand this insert and the entire Model G0705 manual to reduce the risk of injury when using this machine. If you have any further questions about this manual insert or the differences between the Model G0760 and the Model G0705, contact our Technical Support at (570) or techsupport@grizzly.com. Power Feed Assembly Attaching Power Feed For shipping purposes, the power feed assembly comes unattached from the table. To attach power feed assembly: 1. DISCONNECT MACHINE FROM POWER! 2. Insert pins shown in Figure 1 into holes on top of left side of table REF PART # DESCRIPTION 248 P POWER FEED ASSY ALIGN AS P MOUNTING BRACKET 2-PC P CONTROL HANDLE P SPEED CONTROL KNOB P ON/OFF SWITCH P ZYTEL GEAR ASSEMBLY P CAP SCREW M X P DOWEL PIN 6 X P MACHINE ID LABEL 409 P MODEL NUMBER LABEL Pins Cap Screws Figure 1. Power feed assembly attached to table. 3. Using a 6mm hex wrench, secure assembly with two M x 20 cap screws (see Figure 1). COPYRIGHT JANUARY, 2014 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. (FOR MODELS MANUFACTURED SINCE 12/13) #TS16257 PRINTED IN CHINA
2 SECTION 9: PARTS Headstock Parts Breakdown Model G0705 (Mfg. since 09/09)
3 Headstock Parts List 1 P HEAD CASTING 20 P PINION SHAFT 2 P DRAWBAR 21 PFH08 FLAT HD SCR X 1/2 3 P SPINDLE LOCK NUT 22 PK25M KEY 7 X 7 X 20 4 P SPINDLE PULLEY 23 P DOWNFEED ASSEMBLY 5 P OUTER BEARING PLATE 23-1 P CASE 6 PCAP04 CAP SCREW 1/4-20 x 1/ P WORM SHAFT 7 P SPINDLE TAPER SLEEVE SET 23-3 P6202ZZ BALL BEARING 6202ZZ 7-1 P SPINDLE TAPER SLEEVE 23-4 PR05M EXT RETAINING RING 15MM 7-2 P6009ZZ BALL BEARING 6009ZZ 23-5 P SPACER 34MM 7-3 P SPACER 74MM 24 PCAP07 CAP SCREW 5/16-18 X 3/4 7-4 PR92M EXT RETAINING RING 41MM 25 P SLEEVE ASSEMBLY 8 PR50M INT RETAINING RING 80MM 26 P COMPRESSION SPRING 9 P RUBBER FLANGE 27 P LEVER BASE 10 P QUILL CLAMP 28 P FEED ADJUST KNOB M X P QUILL ASSEMBLY 29 P LEVER 11-1 P SPANNER NUT 31 P WORM SHAFT COVER 11-2 P TOOTHED SPINDLE WASHER 32 PCAP02 CAP SCREW X 3/ P30206 TAPERED ROLLER BEARING P MICRO ADJUST INDICATOR SET 11-4 P SPINDLE SLEEVE MT#3 35 P HANDWHEEL ASSEMBLY 11-5 P30207 TAPERED ROLLER BEARING P TORSION SPRING BASE 11-6 P SPINDLE SHAFT 39 PCAP33 CAP SCREW X 3/ P SPINDLE CUP 40 P TORSION SPRING W/COVER 12 P DRIFT KEY 41 PLW02 LOCK WASHER 1/4 13 P CHUCK ARBOR R8-B16 42 PW06 FLAT WASHER 1/4 14 P CUTTER ARBOR 43 PLW02 LOCK WASHER 1/4 15 P DEPTH STOP ASSEMBLY 44 P KNOB BOLT M X P DEPTH STOP ADJUSTER 45 P WORM SHAFT 17 PCAP159M CAP SCREW 1/4-20 x 2 46 P WORM SHAFT BUSHING 18 PN05 HEX NUT 1/ P ELEVATION ASSEMBLY 19 P DEPTH STOP BLOCK Model G0705 (Mfg. since 09/09) -49-
4 Headstock Parts List (continued) 48 PCAP05 CAP SCREW 1/4-20 X 3/4 80 P PULLEY IDLER PLATE 49 P ELEVATION CRANK 81 PN04 HEX NUT 5/ P CLAMP HANDLE 82 PW07 FLAT WASHER 5/16 52 P OUTER QUILL CLAMP 83 PCAP08 CAP SCREW 5/16-18 X 1-1/2 53 P INNER QUILL CLAMP 84 P IDLER PULLEY 54 P QUILL CLAMP SPACER 85 PN04 HEX NUT 5/ P QUILL CLAMP HANDLE 86 P MOTOR PULLEY SET 56 P SCREW KEY 88 PVA33 V-BELT A33 57 PN08 HEX NUT 3/ PVA39 V-BELT A39 58 P COMPRESSION SPRING 90 P WIRE CLIP 59 P BELT TENSION PIN 91 PCAP09 CAP SCREW 5/16-18 X 5/8 60 P RUBBER PAD 92 P MOTOR MOUNT PLATE 61 PB46 HEX BOLT 5/8-11 X 6 93 P MOTOR 2HP 110/220V 1-PH 62 PW14 FLAT WASHER 5/ P MOTOR JUNCTION BOX 63 PN04 HEX NUT 5/ PC150D S CAPACITOR 150M 250V 1-5/8 X 3-1/4 64 P HEADSTOCK WRENCH 93-3 PC20B R CAPACITOR 20M 450V 1-5/8 X 3-1/4 65 P LOCK HANDLE M X P MOTOR FAN 66 P FRONT COVER PLATE ASSEMBLY 93-5 P MOTOR FAN COVER 67 PCAP04 CAP SCREW 1/4-20 X 1/2 94 PW07 FLAT WASHER 5/16 68 P LIMIT PLATE 95 PB03 HEX BOLT 5/16-18 X 1 69 PW18 FLAT WASHER #5 96 PN02 HEX NUT 5/ PS50 PHLP HD SCR 5-40 X 1/4 97 PB36 HEX BOLT 7/16-14 X 3/4 71 P BELT COVER 98 PK109M KEY 7 X 7 X P LOWER BELT PLATE 99 P GUARD BRACKET 74 P SPINDLE COVER 100 PCAP03M CAP SCREW M5-.8 X 8 75 PCAP158M CAP SCREW M3-.5 X PCAP26M CAP SCREW M6-1 X PW07 FLAT WASHER 5/ P PROTECTIVE PLATE 77 PB32 HEX BOLT 5/16-18 X 5/8 113 P CHUCK B MM 78 PCAP04 CAP SCREW 1/4-20 X 1/ P CHUCK KEY 79 P SPEED CHART -50- Model G0705 (Mfg. since 09/09)
5 Base Parts Breakdown Model G0705 (Mfg. since 09/09) -51-
6 Base Parts List 201 P TABLE 226 PB09 HEX BOLT 5/16-18 X 1/2 202 P T-NUT 1/ P GIB SCREW 203 P TABLE STOP 228 P LOCK HANDLE SPACER 204 PCAP04 CAP SCREW 1/4-20 X 1/2 229 P LOCK HANDLE M X PLUBE001 TAP-IN BALL OILER 8MM 230 P LOCK HANDLE M X P TABLE HANDWHEEL 231 PCAP03 CAP SCREW 5/16-18 X P HANDLE 232 PCAP107 CAP SCREW 5/16-18 X 2-1/4 209 P HANDWHEEL COLLAR 233 P CROSS HALF NUT 210 P DOWEL PIN 234 P BASE 211 P LEFT FLANGE 235 P CROSS LEADSCREW ASSEMBLY 212 PCAP03 CAP SCREW 5/16-18 X P COLUMN BASE 213 P LONGITUDINAL HALF NUT 237 P ELEVATION RACK 216 P LONGITUDINAL LEADSCREW 238 P COLUMN CAP 217 P KNURLED THUMBSCREW M5-.8 X P COLUMN RING 218 P INDICATOR PLATE 241 PB64 HEX BOLT 5/8-11 X 2-1/2 219 P RIVET 2MM 242 PLW06 LOCK WASHER 5/8 220 P SADDLE 243 PCAP07 CAP SCREW 5/16-18 X 3/4 221 P DUST COVER PLATE 244 PLW01 LOCK WASHER 5/ P DUST COVER 245 P DRAIN PLUG 223 P LONGITUDINAL GIB 246 P HEX BOLT M X P CROSS GIB 247 P CABINET ASSEMBLY 225 P TABLE CENTER STOP -52- Model G0705 (Mfg. since 09/09)
7 Electrical Components Breakdown & List NO A1 2T1 4T2 6T3 A2 2T1 14NO 22NC 32NC 44NO CONTACTOR SIEMENS KM1 220V 21NC 31NC 43NO 13NO 1L1 3L2 5L3 A T2 6T3 14NO 22NC 32NC CONTACTOR SIEMENS KM2 220V 21NC 31NC 43NO 1L1 3L2 5L3 A2 44NO A 309 Electrical Box A2 2T1 4T2 6T3 14NO 22NC 32NC 44NO CONTACTOR SIEMENS KM1 110V 13NO 21NC 31NC 43NO 1L1 3L2 5L3 A Control Panel (Viewed From Behind) T1 13NO A1 REVERSE BUTTON FORWARD BUTTON A2 4T2 6T3 14NO 22NC 32NC 44NO CONTACTOR SIEMENS KM2 110V 21NC 31NC 43NO 1L1 3L2 5L3 EMERGENCY STOP BUTTON 2 1 POWER INDICATOR LAMP 220V X1 X2 STOP BUTTON POWER INDICATOR LAMP 110V X1 X P ELECTRICAL BOX ASSEMBLY 307 P EMERGENCY STOP BUTTON 302 P TERMINAL BLOCK ASSEMBLY 308 P REVERSE BUTTON 303 P CONTACTOR SIEMENS 3TB41 220V 309 P GROUNDING BLOCK 304 P FORWARD BUTTON 310 P FUSE 12A 305 P POWER INDICATOR LAMP 220V 311 P CONVERSION KIT 110V FOR G P STOP BUTTON Model G0705 (Mfg. since 09/09) -53-
8 Labels Breakdown and List P MACHINE ID LABEL 406 PPAINT-11 PUTTY TOUCH UP PAINT 402 PLABEL-11B SAFETY GLASSES LABEL 407 P CUTTER WARNING LABEL 403 PLABEL-55A ENTANGLEMENT LABEL 408 PPAINT-1 GREEN TOUCH UP PAINT 404 PLABEL-12C READ MANUAL LABEL 409 P MODEL NUMBER LABEL 405 PLABEL-14A ELECTRICITY LABEL Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) or to order new labels Model G0705 (Mfg. since 09/09)
SECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
IMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
SECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
Base Machine Breakdown
SECTION 9: PARTS Base Machine Breakdown 154 151 10 149 8 180 9 11 152 148 12 6 146 153 23 150 7 144 4 147 142 181 2 140 100 139 145 1 143 36 14 141 19 15 182 31 137 16 32 18 13 3 34 16 19 17 41 41 50 38
SECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
Headstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION
For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
SECTION 11: PARTS Main
SECTION 11: PARTS Main 55 48 21 20 22 7 18 19 23 17 17 18 21 22 14 15 16 32 33 34 26 27 50 49 13 47 35 2 18 20 55A 12 11 8 10 45 46 3 38 37 44 53 36 51 42 25 30 29 28 43 99 103 98 100 52 101 5 4 58 57
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
SECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
SECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
SECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
G8146Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
SECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
SECTION 9: PARTS Base Machine
SECTION 9: PARTS Base Machine 8 2 6 7 9 10 1 23 13 31 14 37 32 33 15 18 16 144 142 141 19 17 148 124 125 140 126 127 128 123 131 129 130 120 49 38 39 40 41 50 51 44 46 47 48 43 52 53 54 55 56 57 58 64
Column & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
SECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown Jointer Parts List 1 P0604001 HANDLE 43 PS68M PHLP HD SCR M6-1 X 10 2 P0604002 STUD 44 PW03M FLAT WASHER 6MM 3 P0604003 BUSHING 45 P0604045 BALL HANDLE
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
G8145Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8145Z Cabinet Breakdown & Parts List 14 11 12 16 18 8 10 15 17 9 13 21 22 19 20 24 25 7 4 3 5 6 23 2 19 20 27 28 26 1 1 P8145Z001 WHEEL DOOR LOWER 15 P8145Z015
SECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
REF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
PARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
Headstock and Bow Breakdown (G0613)
SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
D('00 D]^ ('&'. G8IKJ
![D('00 D]^ ('&'. G8IKJ](/thumbs/90/103707123.jpg "D('00 D]^ ('&'. G8IKJ")
1 2 5 6 7 8 11 12 10 13 14 15 27 28 16 26 29 30 25 17 19 20 22 21 32 23 24 31 42 43 33 34 40 41 35 49 36 37 51 52 53 44 45 46 47 38 39 48 18-40- 1 XM1099001 CONTROL PANEL FACE 29 XPCAP50M CAP SCREW M5-.8
Control Rod & Brake -85- Model G0746/G0749 (Mfg. Since 3/13)
SECTION 8: PARTS Control Rod & Brake Control Rod 38 37 43 39 40 45 42 41 46 47 48 49 50 51 52 53 54 55 44 65 64 63 62 61 60 59 58 57 56 Brake 8 11 12 9 10 6 4 2 1 3 7 5 14 15 16 17 18 19 24 25 13 26 27
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
SECTION 9: PARTS. Headstock Cover REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock Cover 1 2 3 4 1 P07400001 HEADSTOCK OIL FILL CAP 3 P07400003 HEADSTOCK COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 P07400004 HEADSTOCK COVER GASKET Please Note: We do our best to stock
SECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
G0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
Main Parts. -4- Model G0555LANV (Mfg. Since 1/13) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 50 51 55 56 57 70 49 69 64 48 62 16 61 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34V2 194 186 6 68 24 115 116
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
SECTION 9: PARTS. Stand REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Stand 1 2 6 8 3 4 5 7 9 6 13 11 28 27 17 15 14 28 27 17 29 18 20 21 22 26 1 2 4 6 3 5 10 9 12 15 16 12 23 17 25 24 9 21 1 P0716001 HANDLE GRIP 16 P0716016 RIGHT LONG TOP BRACE 2 P0716002
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
Base/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V
SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
Parts Breakdown G4030
Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-
M1110 Mill with Dovetail Column. Headstock PARTS -33-
-33- M1110 Mill with Dovetail Column 1012 1082 1083 1001 1084 1002 1003 1005 1006 1007 1008 1009 1010 1011 1097 1096 1095 1019 1017 1094 1073 1015 1081 1016 1013 1014 1018 1020 1021 1022 1023 1024 1025
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
SECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
SECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
SECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
Headstock Cover PARTS. For Machines Mfg. Since 5/ REF PART # DESCRIPTION REF PART # DESCRIPTION
Headstock Cover 1 2 3 4 1 PSB10490001 HEADSTOCK OIL FILL CAP 3 PSB10490003 HEADSTOCK TOP COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 PSB10490004 TOP COVER GASKET -95- For Machines Mfg. Since 5/11 Headstock Controls
G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
MODEL SB1052F TURN-X 14" X 40" LATHE w/dro
MODEL SB1052F TURN-X 14" X 40" LATHE w/dro Manual Insert PHONE: (360) 734-1540 www.southbendlathe.com The Model SB1052F Lathe is the same machine as the Model SB1052 except for the following: Added a 2-Axis
SECTION 9: PARTS. Table
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
Model W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-
3 144 1 143 119 1 4-1 14 140 13 4 1 1 4 14 11 7 108 134 131 13 14 100 1 8 16 9 80 93 40 14 146 39 Main Breakdown 133 117 130 10 3 19 3 11 10 9 38 9 7 6 4 13 7 134 16 138 141 Model W184 (For Machines Mfd.
ST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
MODEL NO.: MI PARTS BREAKDOWN
MODEL NO.: MI-76350 PARTS BREAKDOWN MAGNUM DRILL PRESS ASSEMBLY INSTRUCTIONS MODEL MI-76350 Before you begin to assemble your drill press, review the parts breakdown and keep it ready for reference. Start
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
GEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
G0614 Control Box Parts
G0614 Control Box Parts 247V2 250V3 251V3 252V3-1 246V2 252V3 253V2 256V2 254V2 255V2 257V2 246V2 P0614246V2 FUSE HOUSING GIKO KA FSB102-1-2 V2.07.06 253V2 P0614253V2 ON BUTTON AP-PBF-22-1/0G V2.07.06
READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z
READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663
SECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
SECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
SECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
-36- Extreme Duty Planers
117 116 111 106 102 105 103 108 107 113 101 119 118 104 110 109 114 440v Conversion Kit 120-11 120 112 115 120-1 120-1 120-1 120-2 120-10 120-3 120-4 120-5 120-6 120-7 120-8 120-9 121-36- Extreme Duty
SECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
-58- G1023SL Series Table Saw 16 19 20 21 216 220 221 217 222 17 18 19 20 21 22 23 24 25 26 30A 30B 26A 26A 27A 28 27 27 68 26A 22 23 27 27 28 24 25 29B 29A 30 30 31 31 32 33 35C 37B 35A 35B 35D 36 37A
PARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
G5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
W1812 Owner's Manual (Mfd. Since 02/11) PARTS. Headstock 11V2 30V2 95V V2 8 25V2 41V2 25V2 23V2 27V2 PARTS -45-
-45- Headstock 20 21 23V2 8 25V2 23V2 25V2 26 28 87 88 57 56 40 47 39 39 37 46 33 34 42 63 13 2 93 93 71 70 69 17 41V2 92 30V2 31 32 7 38 35 33 34 37 40 43 16 11V2 1 4 5 9 61 62 61 62 18 10 3 8 19 14 95V2
15" PLANER MODEL G1021Z PARTS LIST
15" PLANER MODEL G1021Z PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL,
POWER FEEDER MODEL G1128 AND MODEL G1129 PARTS LIST
POWER FEEDER MODEL G1128 AND MODEL G1129 PARTS LIST COPYRIGHT 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY
SECTION 8: PARTS Cabinet Breakdown
SECTION 8: PARTS Cabinet Breakdown G0641 Double Miter Saw -39- Cabinet Parts List 1 P0641001 SAFETY HOOD 17 PB03M HEX BOLT M8-1.25 X 16 2 P0641002 FRONT GUARD 18 PW01M FLAT WASHER 8MM 3 PW01M FLAT WASHER
BUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
PARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
14" X 40" EVS TOOLROOM LATHES
14" X 40" EVS TOOLROOM LATHES MODEL SB1012-220V MODEL SB1013-440V MANUAL November, 2009 by South Bend Lathe Co., Revised August, 2014 (ST) For Machines Mfg. Since 7/09 Scope of Manual The parts breakdowns