C A T A L O G. (800) Welcome to LittleMachineShop.com

Transcription

1 C A T A L O G 28 Late 2017 The premier source of tooling, parts, and accessories for bench top machinists. (800) W Washington Blvd #500 Pasadena CA info@littlemachineshop.com Welcome to LittleMachineShop.com the premier source of machines, tooling, parts, and accessories for bench top machinists. We focus on best-in-class machines and we offer tools, accessories, and replacement parts for: Bench top lathes Bench top milling machines Small band saws Products we support are sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight Tools, Micro-Mark, Busy Bee Tools, and others. Besides the products shown in this catalog, we have virtually every replacement part for the mini lathes, mini mills, and micro mills sold by these companies. Visit our Web site at to see large, full-color pictures along with more products and more information than we can fit in this catalog. Check our Web site at for current prices. Prices are subject to change without notice.

2 Contents CNC Machines Accessories 13 CNC Lathes 13 CNC Milling Machines 13 Collets and Chucks 3C Collets 14 5C Collets 14 Brown & Sharpe Collets 14 ER Collets 15 Morse Taper Collets 16 R8 Collets 17 Taig Collets 17 Watchmakers Collets 17 Coolant Systems Cutting Compounds 17 Flood Systems 18 Lubricants 18 Mist Systems 18 Cutting Tools Boring Bars 19 Broaches 20 Counterbores 20 Countersinks 20 Cut-Off Tools 20 Drill Sets 21 Drills 22 End Mills 22 Engraving Tools 24 Indexable End Mills 24 Indexable Inserts 25 Reamers 25 Saw Blades 25 Slitting Saws 26 T-Slot and Dovetail Cutters 26 Turning Tools 26 DROs DRO Packages 29 Scales 30 Kits Lathe Conversion Kits 30 Lathe Starter Kits 31 Mill Conversion Kits 33 Mill Starter Kits 35 Spare Parts Kits 38 Lathe 10x21 Lathe (C6) Accessories 38 4x5 Micro Lathe (C0)/Unimat Accessories 7x10/12/14 Mini Lathe (C2/C3) Accessories 7x10/12/14 Mini Lathe (C2/C3) Assemblies x16 Lathe (C4) Accessories 41 8x12/14 Lathe Accessories 41 Tool Post Grinders 42 Tooling 42 Lathe Chucks Accessories 43 Adapters 43 Chucks 44 Machines Band Saws 45 Mill Lathes 45 Mills 46 Stands/Cabinets 47 HiTorque Bench Mill (SX2.7) Accessories HiTorque Mini Mill (SX2) Accessories Micro Mill (X1) Accessories 48 Micro Mill (X1) Assemblies 49 Mini Mill (X2) Accessories 49 Mini Mill (X2) Assemblies 49 Quick Change Tooling 50 Small Mill (X3/SX3) Accessories 51 Tooling 52 Models Flywheels 53 Fully Assembled and Kits 53 Plans 53 Precision Calipers 53 Edge and Center Finders 55 Indicators 56 Layout 58 Measuring 60 Sets 66 Setup 66 Project Plans CNC Conversions 68 Engines 68 Tools 69 QC Tool Posts QCTP Sets 69 Rotary Tables Rotary Tables 70 Threading Tools Die Holders 72 Hand Tappers 72 Lathe Threading 72 Tap and Die Sets 72 Tap Holders and Guides 73 Taps and Dies 74 Thread Repair Tools 74 Tooling Arbors and Sleeves 75 Clamping Kits 75 Drill Chucks 76 Tools & Things Abrasives 77 Adhesives 77 Air Tools 78 Batteries 78 Gift Certificates 78 Lights 78 Lubrication 78 Shims 78 Things 78 Tools 79 Workwear 82 X-Y Tables 82 Videos and Books CNC Books 82 Machinist Books 82 Other Books 82 Reference Books 82 Users Guides 83 Videos 83 Vises Accessories 84 Milling Vises 84 Other Vises 85 Screwless Vises 85

3 HiTorque Bench Mill, Models 5500/5550 The LittleMachineShop.com HiTorque Bench Mill is a step up in size, rigidity, and power compared to a mini mill. It provides a larger table, more travel, and more horsepower. The 23.4" x 5.5" (595 mm x 140 mm) table on the 5500 bench mill provides a large work area. And the extra-long 27.6" x 6.3" (700 mm x 160 mm) table on the 5550 deluxe bench mill is huge! A 750 watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The HiTorque Bench Mill incorporates a true quill and drill press-style handles for easy drilling. A button on the end of each handle reverses the spindle to make tapping easy. R8 spindle for wide tool availability 0.001" graduated dials, 0.100" per turn Tapping mode for reversing taps out Solid rectangular column for rigidity Dovetail column to maintain head alignment at any height E-stop safety power switch Spindle speed display Spindle fine feed and position lock Fine feed on Z-axis for precise control Adjustable gibs on all dovetail ways Includes ½" capacity drill chuck and arbor New for Fall 2017! 5550 HiTorque Deluxe Bench Mill All the features of the 5500 bench mill plus: Extra-long table 27.6" x 6.3" (700 mm x 160 mm) 3-axis digital readout (DRO) with Bluetooth and 7" tablet display Electrically interlocked spindle lock Machined aluminum handwheels NEW! 5500 HiTorque Bench Mill $ HiTorque Bench Mill, Deluxe $ Specifications End Milling Capacity Face Milling Capacity Drilling Capacity Table Size T-slots X-Axis Travel Y-Axis Travel Z-Axis Travel Throat 0.6" (16 mm) 2.0" (50 mm) 0.8" (20 mm) 5500: 23.4" 5.5" (595 mm 140 mm) 5550: 27.6" x 6.3" (700 mm x 160 mm) 3 slots 0.47" (12.0 mm) wide 5500: 15.6" (395 mm); 5550: 19.7" (500 mm) 7.0" (178 mm) 11.6" (295 mm) 7.5" (190 mm) X- and Y-Axis Feed Screws 0.100" (2.54 mm) per rotation Positioning Accuracy " (0.010 mm) Spindle Taper Spindle Motor Spindle Speed Power Requirements Weight Dimensions (W D H) Crated Weight Crate Dimensions (W D H) R8 1.0 hp (750 Watts) RPM 120 V 60 Hz 10 Amps 207 lbs (94 kg) 28.9" 25.0" 28.5" (735 mm 635 mm 725 mm) 262 lbs (119 kg) 32.0" x 28.0" x 35.5" (813 mm x 711 mm x 902 mm) Tooling Packages and Accessories Each tooling package includes: 4" precision milling vise and mounting kit Thin parallels set blocks 58-piece clamping kit R8 collet set End mill set, 2- and 4- flute Center drills Edge and center finder T-slot cleaner 3526 Tooling Package $ Premium Tooling Package $ Stand Cabinet $229.95

4 HiTorque Mini Mill, Models 3990/4190 The LittleMachineShop.com HiTorque Mini Mill offers best-in-class features: more power, more torque, and a larger table than competitors mills. It has our exclusive solid column for extra rigidity. And it includes one of the most popular upgrades for our earlier mills: an air spring to support the mill head, which provides greater support for the head and increased travel on the Z-axis. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 RPM to 2500 RPM continuously. There are no gears to shift. With no gears, the HiTorque Mini Mill is the quietest in its class. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill head. It also has Z-axis fine feed with 0.001" resolution for milling operations. R8 Spindle for wide tool availability Dovetail column maintains head alignment at any height E-stop safety power switch Adjustable Z-axis stop for repetitive drilling Neoprene bellows protect horizontal ways Adjustable gibs on all dovetail ways Includes ½" capacity drill chuck and arbor New for 2017! 4190 HiTorque Deluxe Mini Mill All the features of the 3990 mini mill plus: 3-axis digital readout (DRO) with Bluetooth and 7" tablet display Electrically interlocked spindle lock Machined aluminum handwheels NEW! 3990 HiTorque Mini Mill $ HiTorque Mini Mill, Deluxe $ Specifications End Milling Capacity Face Milling Capacity Drilling Capacity Table Size T-slots X-Axis Travel Y-Axis Travel Z-Axis Travel Throat X- and Y-Axis Feed Screws Positioning Accuracy 0.6" (16 mm) 1.2" (30 mm) 0.5" (13 mm) 18.1" 4.7" (460 mm 120 mm) 3 slots 0.47" (12.0 mm) wide 11.8" (300 mm) 5.1" (130 mm) 10.6" (270 mm) 6.5" (165 mm) 0.062" (1.59 mm) per rotation " (0.010 mm) Spindle Taper R8 Spindle Motor 0.67 hp (500 Watts) Spindle Speed RPM Power Requirements 120 V 60 Hz 8 Amps Weight 124 lbs (56 kg) Dimensions (W D H) 23.2" 19.7" 36.3" (590 mm 500 mm 922 mm) Crated Weight 161 lbs (73 kg) Crate Dimensions (W D H) 23.6" x 25.0" x 29.9" (600 mm x 635 mm x 760 mm) Tooling Packages and Accessories We design our tooling packages to include everything you need to get started with a new machine. Tooling packages offer tremendous savings over buying individual items, and you know that every part of the tooling package will work with your new machine. Each tooling package includes: 3" precision milling vise and mounting kit Thin parallels set blocks (except 4491) 58-piece clamping kit R8 collet set End mill set, 2- and 4-flute Center drills Edge and center finder T-slot cleaner We offer three packages; the higher priced packages include more pieces (e.g., more end mill sizes) and higher quality components Mini Mill Essentials Tooling Package $ Tooling Package $ Precision Tooling Package $ Premium Tooling Package $ Stand Cabinet $139.95

5 HiTorque Micro Mill, Models 4700/4660 Like its big brother, the best-in-class LittleMachineShop.com HiTorque Micro Mill has more power, more torque, and a larger table than competitors mills. The 250 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 RPM to 5000 RPM continuously. There are no gears or belts to shift. And, with no gears, the HiTorque Micro Mill is the quietest in its class. The large mill table provides 50% more width than other micro mills. The resettable feed dials allow you to zero them at any point. The HiTorque Micro Mill has a drill press handle for drilling. It also has Z-axis fine feed with 0.001" resolution for milling operations. Available with #2 Morse Taper (model 4700) or ER-16 (model 4660) spindle 250 Watt output spindle motor Large X-Y table Solid, non-tilting column provides great rigidity Dovetail column maintains head alignment at any height Fine feed on Z-axis for precise control Radial handle for drilling E-stop safety power switch Adjustable Z-axis stop for repetitive drilling Adjustable gibs on all dovetail ways Includes 3/8" capacity drill chuck and arbor MT Spindle HiTorque Micro Mill $ ER-16 Spindle HiTorque Micro Mill $ Specifications End Milling Capacity Face Milling Capacity Drilling Capacity Table Size T-slots X-Axis Travel Y-Axis Travel Z-Axis Travel Throat X- and Y-Axis Feed Screws Positioning Accuracy 0.4" (10 mm) 0.6" (16 mm) 0.4" (10 mm) 15.7" 5.7" (400 mm 145 mm) 3 slots 0.31" (8.0 mm) wide 11.8" (300 mm) 5.9" (150 mm) 8.7" (220 mm) 5.5" (140 mm) 0.050" (1.27 mm) per rotation " (0.010 mm) Spindle Taper 2 Morse Taper (4700) or ER-16 (4660) Spindle Motor Spindle Speed Power Requirements Weight Dimensions (W D H) 0.34 hp (250 Watts) RPM 120 V 60 Hz 5 Amps 106 lbs (48 kg) 20.5" 19.3" 28.7" (520 mm 490 mm 730 mm) Tooling Packages and Accessories We design our tooling packages to include everything you need to get started with a new machine. Tooling packages offer tremendous savings over buying individual items, and you know that every part of the tooling package will work with your new machine. Each tooling package includes: 3" screwless vise and mounting kit Thin parallels set blocks 36-piece clamping kit Collet set End mill set, 2- and 4-flute Center drills Edge and center finder MT Micro Mill Tooling Package $ ER-16 Micro Mill Tooling Package $ Stand Cabinet $139.95

6 SIEG X2D Mini Mill The SIEG X2D Mini Mill has all the features you want at an incredibly low price. This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other low-cost mini mills. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. The X2D Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This model also includes the air spring head support for even support throughout the Z-axis travel. 350 Watt variable speed DC drive Large X-Y table R8 Spindle for wide tool availability Air spring provides greater support for the mill head and increased travel on the Z-axis Solid column mount for greater rigidity Fine feed on Z-axis for precise control Three radial handles for drilling Dovetail column maintains head alignment at any height E-stop safety power switch Adjustable Z-axis stop for repetitive drilling Neoprene bellows protect horizontal ways Adjustable gibs on all dovetail ways Includes ½" capacity drill chuck and arbor Specifications End Milling Capacity Face Milling Capacity Drilling Capacity Table Size T-slots X-Axis Travel Y-Axis Travel Z-Axis Travel Throat X- and Y-Axis Feed Screws Positioning Accuracy Spindle Taper Spindle Motor Spindle Speed Power Requirements Weight 0.6" (16 mm) 1.2" (30 mm) 0.5" (13 mm) 18.1" 4.7" (460 mm 120 mm) 3 slots 0.47" (12.0 mm) wide 11.8" (300 mm) 5.1" (130 mm) 10.6" (270 mm) 6.5" (165 mm) 0.062" (1.59 mm) per rotation " (0.010 mm) R hp (350 Watts) RPM 120 V 60 Hz 6 Amps 126 lbs (57 kg) Dimensions (W D H) 23.2" 19.7" 36.3" (590 mm 500 mm 922 mm) Crated Weight Crate Dimensions (W D H) 161 lbs (73 kg) 23.6" x 25.0" x 29.9" (600 mm x 635 mm x 760 mm) 4962 SIEG X2D Mini Mill, Solid Column with Air Spring $ Mill Comparison 4491 Mini Mill Essentials Tooling Package $ Tooling Package $ Premium Tooling Package $ Stand Cabinet $ How do you choose among the seven manual milling machines we offer? Here s a quick rundown of the differences: The 4962 SIEG X2D Mini Mill has nearly all the features we ve become famous for at an affordable price: largest mini mill table, rigid solid column, R8 spindle, and pre-installed air spring head support. The 3990 HiTorque Mini Mill adds the powerful HiTorque drive system, which uses a brushless DC motor to offer more power, greater torque at low speeds, full speed range without shifting gears, and quiet operation. The 4190 HiTorque Deluxe Mini Mill adds a factory-installed DRO, a spindle lock, and nicer looking handles. The 5500 HiTorque Bench Mill is a step up in size, rigidity, and power. It provides a larger table, more travel, and more horsepower than the mini mills. The 5550 HiTorque Deluxe Bench Mill has an even larger table, plus a factory-installed DRO, a spindle lock, and fancy handles. The 4660 or 4700 HiTorque Micro Mill offers the power (great torque at low speeds) and convenience (no gears or belts to shift) of the brushless DC drive system in a more compact configuration, ideal for smaller projects. Its higher spindle speed is ideal for small cutters.

7 HiTorque 8½" x 20" Bench Lathe, Models 3540/3595 The LittleMachineShop.com 8½" 20" HiTorque Bench Lathe is the best in its class. No other lathe in this size offers power cross feed. The 1000 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 RPM to 2000 RPM continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and advance 0.050" per turn. The lathe is equipped with a 4-way indexing tool post set for 3/8" (10 mm) tools. A reversible 2 mm pitch lead screw provides extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.2 to 8 mm pitch with the change gears that are included. All the gears on this lathe are metal. Power longitudinal feed and power cross feed Genuine NSK ball bearings New for 2017! Induction hardened bed ways E-stop safety power switch Cam lock tailstock Four-way tool post Zero-resettable dials graduated in inches and mm Reversible lead screw for right- and left-hand threads Specifications Swing Over Bed Swing Over Saddle Between Centers Spindle Through Hole Spindle Motor Output Range of Threads Spindle Taper Tailstock Taper Spindle Speed Cross Slide Travel Power Requirements Weight 8.5" (215 mm) 4.6" (118 mm) 20" (510 mm) 0.8" (20 mm) 1.34 hp (1000 Watts) 8 80 TPI ( mm) #3 Morse taper #2 Morse taper RPM 3.9" (100 mm) 120 V 60 Hz 12 Amps 220 lbs (100 kg) Dimensions (W D H) 40" 22" 16" (1010 mm 550 mm 400 mm) Crated Weight Crate Dimensions (W D H) 281 lbs (128 kg) 44" x 28" x 22" (1110 mm x 700 mm x 550 mm) New for 2017! 3595 HiTorque Deluxe Bench Lathe All the features of the 3540 bench lathe plus: AXA quick change tool post (QCTP) set with five tool holders Digital readout (DRO) displays on compound rest and cross slide Anodized aluminum hand wheels, knobs, and levers Improved splash guard Modified compound rest to better accommodate QCTP 3540 HiTorque 8½" 20" Bench Lathe $ HiTorque 8½" 20" Deluxe Bench Lathe $ Tooling Packages and Accessories We design our tooling packages to include everything you need to get started with a new machine. Tooling packages offer tremendous savings over buying individual items, and you know that every part of the tooling package will work with your new machine. Each tooling package includes: Quick change tool post set (3540 packages only) Indexable turning tools Boring bar Center drills Cut-off blade Drill chuck and arbor For Tooling Package $ Premium Tooling Package $ For Tooling Package $ Premium Tooling Package $ Stand $199.95

8 HiTorque 7"x16" Mini Lathe, Models 5100/5200 The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and more features than competitors lathes. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and mm. A 4" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance. The deluxe model 5200 (shown at left) adds an all-steel wedge-style quick change tool post set with five tool holders, digital readout (DRO) displays on the compound rest and cross slide, and metal hand wheels with chrome levers. Includes Mini Lathe Users Guide written by Chris Wood 500 Watt output spindle motor No gears in spindle drive 4" 3-jaw chuck E-stop safety power switch Zero-resettable dials graduated in inches and mm Extended threading capability - inch and metric threads Rear apron shield to keep swarf out of the mechanism Cam lock tailstock Four-way tool post on 5100; quick change tool post set on 5200 Reversible lead screw for right and left hand threads 5100 HiTorque 7" 16" Mini Lathe $ HiTorque 7" 16" Deluxe Mini Lathe $ Specifications Swing Over Bed Swing Over Saddle Between Centers Spindle Through Hole Spindle Motor Output Range of Threads Spindle Taper Tailstock Taper Spindle Speed Cross Slide Travel Power Requirements Weight 7" (180 mm) 4.3" (110 mm) 16.1" (410 mm) 0.8" (20 mm) 0.7 hp (500 Watts) 4-80 TPI (0.3-8 mm) #3 Morse taper #2 Morse taper RPM 2.6" (65 mm) 120 V 60 Hz 8 Amps 82 lbs (37 kg) Dimensions (W D H) 27" 10" 12" (685 mm 260 mm 300 mm) Crate Dimensions (W D H) 35" x 16" x 15" (900 mm x 410 mm x 380 mm) Tooling Packages and Accessories Our tooling packages include everything you need to get started with a new machine. Each tooling package includes: Quick change tool post set (5100 packages only) Indexable turning tools Boring bar Center drills Cut-off blade Drill chuck and arbor For Tooling Package $ Premium Tooling Package $ For Tooling Package $ Premium Tooling Package $ Stand Cabinet $168.95

9 SIEG C3 7"x14" Mini Lathe The SIEG C3 7x14 Mini Lathe has all the features you want at an incredibly low price. A full 14" bed length with a cam-lock tailstock accommodates longer work pieces. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch. The cross feed and compound rest dials are graduated in 0.001" and mm. The lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools. The lathe includes a chip tray, a backsplash guard, and a threading dial. Specifications Swing Over Bed Swing Over Saddle Between Centers Spindle Through Hole Spindle Motor Output Range of Threads Spindle Taper Tailstock Taper Spindle Speed Power Requirements Weight Dimensions (W D H) 7" (180 mm) 4.3" (110 mm) 14.0" (355 mm) 0.8" (20 mm) 0.5 hp (350 Watts) 4-80 TPI (0.3-8 mm) #3 Morse taper #2 Morse taper RPM 120 V 60 Hz 6 Amps 88 lbs (40 kg) 29" 10" 12" (740 mm 260 mm 300 mm) Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key Variable speed 350 Watt spindle motor with two speed ranges for low speed torque Digital spindle speed readout Cam-lock tailstock E-stop safety power switch Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest Extended threading capability - inch and metric threads Rear apron shield to keep swarf out of the mechanism Cam lock tailstock Four-way turret tool post Reversible lead screw for right and left hand threads 4959 SIEG C3 7" 14" Mini Lathe $ Accessory Package $ Tooling Package $ Premium Tooling Package $ Stand Cabinet $ Lathe Comparison How do you choose among the five lathes shown on this and the preceding pages? Here s a quick rundown of the differences: The 4959 SIEG C3 7" 14" Mini Lathe is a full featured lathe at an affordable price. It features a 14" bed and spindle speed readout in addition to the cam-lock tailstock that is included on all our lathes. The 5100 HiTorque Mini Lathe adds the powerful HiTorque drive system, which uses a brushless DC motor to offer more power, greater torque at low speeds, full speed range without shifting gears, and quiet operation. It comes with a 4" 3-jaw chuck. The distance between centers is 16". The 5200 HiTorque Deluxe Mini Lathe adds three features to the 5100: an all-steel wedge-style quick change tool post set, digital readout (DRO) displays on the compound rest and cross slide, and metal hand wheels with chrome levers. The 3540 HiTorque Bench Lathe is a big step up in size (8½" 20") and power. It has all the features of our smaller lathes, plus power cross feed. The 3595 HiTorque Deluxe Bench Lathe adds several features to the 3540: most notably, an AXA quick change tool post set, digital readout displays on the compound rest and cross slide, and anodized aluminum hand wheels, knobs, and levers.

10 Speed Lathe, Model 4160 The speed lathe is ideal for polishing and deburring. With its small footprint, you can place it near your CNC machine for quick and easy finishing, gaging, and other operations with hand-held tools. It incorporates a lever-operated 5C collet closer for fast part changes. NEW! You control operation with the front panel switch or with the included foot switch. Specifications Swing Spindle Motor Output Spindle Taper Spindle Speed Power Requirements Crated Weight Machine Weight Overall Dimensions (W x D x H) 12" (305 mm) 1.1 hp (800 Watts) 5C Collet RPM 120 V 60 Hz 10 Amps 125 lbs (57 kg) 105 lbs (48 kg) 14" x 18" x 15" (343 mm x 470 mm x 381 mm) 4160 Speed Lathe $ Bench-Top Band Saw The LittleMachineShop.com Bench-Top Band Saw is perfect for the small shop. It's got the capacity of larger floor-standing saws but takes a fraction of the space. The two-speed motor makes it great for ferrous (e.g., steel) and nonferrous (e.g., aluminum) metals. Use low speed for steel and other harder materials. Use high speed for aluminum and other non-ferrous metals. High speed works well for wood and plastic, too. It's quieter and more accurate than chop saws. And by removing a few bolts and installing a handle (included), it becomes a handy portable saw. Uses widely available 44-7/8" blades Two blade speeds 3" (80 mm) x 4" (100 mm) capacity Comes with a 14 TPI bi-metal blade Includes stand with quick-adjusting cast iron vise Specifications Low Cutting Speed High Cutting Speed Round tube capacity 105 FPM (58 m/min) 280 FPM (85 m/min) 3" (80 mm) Blade size 44.88" x 0.5" x 0.02" (1140 mm x 13 mm x 0.6 mm) Round bar capacity Rectangle capacity Cutting Angle Power Requirements Base Dimensions (W x D) 4" (100 mm) 3" x 4" (80 mm x 100 mm) 0 to 45 Degrees 120 V 60 Hz 8 Amps 18.5" x 10.6" (470 mm x 270 mm) 4829 Bench-Top Band Saw $249.95

11 Tormach CNC Milling Machines Whether you re in R&D, education, manufacturing, or simply have a great idea for a product, you need an affordable precision machine to make things happen. The Tormach PCNC milling machines offer the serious machining capability, backed by industrial quality, which is so necessary to bring your ideas to life. With unprecedented affordability and value, the open architecture design combines cast iron construction with personal computer technology to address a wide variety of needs. Three models are available: PCNC 440 The newest addition to the lineup fits all-around capability in a compact and affordable package. The PCNC 440 is perfect for anybody who wants to do real cutting, but doesn t have a lot of space. The PCNC 440 offers high-performance bipolar stepper motors with Leadshine micro stepping drivers. It also incorporates rolled C7 ball screws with anti-backlash double ball nuts. It has a cast iron frame and table with hand-scraped hydrodynamic ways and tapered adjustment gibs. The way surfaces are low friction PTFE-filled Acetyl bonded sliding surfaces similar to Rulon and Turcite. We offer the PCNC 440 as a package that includes the PathPilot machine controller system, a 4" CNC vise, a Tormach Tooling System basic tooling set, and other accessories. PCNC 770 Series 3 With a RPM spindle and 130 IPM maximum feed rates, the PCNC 770 is a top performer when it comes to aluminum, light metals, and plastic and still up to the task when you need to cut tough metals like stainless steel or titanium. Combined with a space-saving footprint, basic household 115 VAC power requirement, and innovative moving features, the versatile PCNC 770 is a perfect fit, no matter the size of your shop. PCNC 1100 Series 3 At over 1100 lbs and with a 5000 RPM spindle, the PCNC 1100 is fully capable of cutting iron, steel, titanium, and even chromium alloys like 300 or 400 series stainless. The machine s design is focused on the needs of prototyping, R&D, and small shop operations. The open design is better suited to combined manual and automatic operations than an enclosed VMC (vertical machining center), yet when combined with the Tormach machine stand you still have good chip and coolant containment and a clean shop. By limiting rapid motion to less than 100 IPM the machine is not only lower in cost, but also safer to operate. By replacing a conventional ATC (automatic tool changer) with the quick change Tormach Tooling System, the machine is both easier to afford and easier to maintain. Tooling cost is significantly lower, yet the tool change time is still less than 30 seconds. The machine is built to industrial standards and perfectly suited to work cells in a lean manufacturing environment or dedicated secondary operations. The PCNC 1100 is PC controlled, allowing your CAD and CAM software to coexist with the CNC control program. A single workstation takes your idea from concept to completion. Again, this reduces your machine cost and improves overall turnaround time. The control system uses standard industrial components and interfaces. This approach minimizes the initial cost, reduces maintenance cost, and virtually eliminates any risk of obsolescence. The combined effect gives you a highly reliable product with a low cost of ownership. We sell machines, stands, options, and accessories on an a la carte basis so you buy only what you need. Machines include CNC control software with all functions, including 4th axis support. The straightforward machine design is supported with extensive technical documentation, telephone support, and warranty service on replacement parts. Visit our showroom in Pasadena for a demo. Machine prices start at $

12 Specifications PCNC 440 PCNC 770 PCNC 1100 Table Size 18.0" x 6.3" (457 mm x 160 mm) 26" x 8" (660 mm x 203 mm) 34.0" x 9.5" (864 mm x 241 mm) T-slots 3 slots 0.39" (10.0 mm) wide 3 slots 0.62" (15.9 mm) wide 3 slots 0.62" (15.9 mm) wide X-Axis Travel 10.0" (254 mm) 14.0" (356 mm) 18.0" (457 mm) Y-Axis Travel 6.25" (158.8 mm) 7.5" (190 mm) 9.5" (241 mm) Z-Axis Travel 10.0" (254 mm) 13.25" (337 mm) 16.25" (413 mm) Spindle Taper R8 R8 R8 Spindle Motor 2/3 hp brushless DC motor 1 hp sensorless vector motor 1.5 hp sensorless vector motor Spindle Speed RPM RPM RPM Rapid Travel Maximum 135 in/min (3429 mm/min) 135 in/min (3429 mm/min) 110 in/min (2794 mm/min) Power Requirements 120 V 60 Hz 15 Amps 120 V 60 Hz 240 V 60 Hz 20 Amps Machine Weight 600 lbs (205 kg) 908 lbs (301 kg) 1580 lbs (514 kg) Dimensions (W D H) 80" x 45" x 82" (203 cm x 114 cm x 208 cm) 61.5" x 45" x 73" (156 cm x 114 cm x 185 cm) 42" x 36" x 72" (106 cm x 91 cm x 183 cm) Tormach CNC Lathe The Tormach 15L Slant-PRO is a compact CNC slant-bed lathe designed for prototyping and light production work. With highly customizable workholding, rigid tapping support, and a host of configurable options and upgrades, the Tormach 15L Slant-Pro is a multipurpose CNC lathe for the small shop. Features include: Cast iron frame 15" swing over bed diameter Onboard Conversational Programming Interface Native 5C spindle; removable taper insert provides up to 1.4" spindle bore D1-4 spindle nose; accepts D1-4 cam-lock lathe chucks Extra long 24.5" carriage; supports QC tool post, gang, and turret tooling Rigid tapping support 3 hp spindle with speeds up to 3500 RPM 12 month factory warranty The 15L Slant-PRO can be accessorized with a wide array of tool changing and work holding options, including gang, quick change, or fully automatic tool changing, collet closers, etc.. The available spindle speed range and horsepower make it well suited to cutting most metals, as well as plastics and non-abrasive composites. Conversational programming screens make this lathe a versatile prototyping tool and easy to program CNC tool. Many part geometries can be programmed on the control without resorting to CAD/CAM. $11, Specifications Swing Over Bed 15" (381 mm) Swing Over Saddle 6.2" (157 mm) Spindle Through Hole 1.4" (36 mm) Spindle Motor Output 3 hp (2237 Watts) Spindle Taper 5C Spindle Nose D1-4 Spindle Speed RPM Carriage Travel (X, Z) 10" x 12" (254 mm x 305 mm) Power Requirements 240 V 60 Hz Power (Secondary) Crated Weight Overall Dimensions (W x D x H) Crate Dimensions (W x D x H) 120 V 60 Hz 1580 lbs (718 kg) 58" x 29" x 66" (1473 mm x 737 mm x 1676 mm) 65" x 37" x 65" (1651 mm x 940 mm x 1651 mm)

13 CNC Machines: Accessories CNC Machines: CNC Lathes 4244 Computer, Machine Controller $ Dual Core Atom processor 60 GB solid state drive 2 GB Memory 19" Flat screen monitor Keyboard & Mouse The Mini-ITX Dual Core Atom computer includes the computer, a 19" flat screen monitor, plus keyboard and mouse. It comes with a fully licensed copy of Windows 7 Home Premium. This computer mounts on the back of the flat-screen monitor using the VESA mounting holes. This is a very compact setup for your shop. We even include a short monitor cable. This computer includes a parallel port on the motherboard, and is guaranteed to work with LittleMachineShop.com CNC milling machines with parallel interface. This computer is optimized to run Mach3. It's not designed to run CAD/CAM software. But you don't want to use those programs in your shop anyway. Install CAD/CAM programs on your desktop computer Jog Dial for CNC Machines $89.95 The ideal Mach3 accessory Fully configurable USB Interface Setup software included Complete jog pendent The Z-Bot Jog Dial II replaces the hand cranks on CNC mills. The Z-Bot Jog Dial II is a USB jog pendent controller developed to work in conjunction with the popular Mach3 CNC control software. It is supplied with an installation disc that contains a Mach3 custom plug-in. The Jog Dial II is highly flexible, easy to use, requires minimal configuration, and does not use any parallel port pins. The Jog Dial II USB controller has an inner and outer dial. Used for rapid coarse positioning, the outer dial will jog progressively faster, up to the full jog speed configured in Mach3, as the dial is turned further to the right or left of the center detent. The outer dial springs back to center position when released. Used for fine positioning, the inner dial jogs the machine one step increment, as configured in Mach3 for each "click." Four buttons are used to select the axis to jog. The fifth button is easily configured for a variety of Mach3 functions using the plug-in supplied PathPilot Machine Controller, Tormach $ Includes computer, monitor, mini keyboard, keyboard cover, and mouse Tormach Performance Machine Controller (34119) Standard LCD Monitor (30615) Mini Keyboard (31371) Keyboard Cover (31384) Tormach provides a high performance computer pre-configured for machine control for general use with your PCNC 770 or PCNC This controller is recommended for performance applications such as large files, high block rates, or use of CAD or CAM on the controller. The configured computer includes a one year warranty with technical support provided by Tormach, power cable, and mouse Lathe CNC, Tormach 15L Slant Pro $11, " Diameter swing over bed 3 HP Spindle (up to 3500 RPM) D1-4 Nose with removable 5C taper Insert 25" Carriage Conversational programming The Tormach 15L Slant-PRO is a compact CNC slant-bed lathe designed for prototyping and light production work. With highly customizable workholding, rigid tapping support, and a host of configurable options and upgrades, the Tormach 15L Slant-PRO is a multipurpose CNC lathe for the small shop. The 15L Slant-PRO can be accessorized with a wide array of tool changing and work holding options, including gang, quick change, or fully automatic tool changing, collet closers, etc.. The available spindle speed range and horsepower make it well suited to cutting most metals, as well as plastics and nonabrasive composites. Conversational programming screens make this lathe a versatile prototyping tool and easy to program CNC tool. Many part geometries can be programmed on the control without resorting to CAD/CAM. CNC Machines: CNC Milling Machines 4263 Milling Machine CNC, Tormach PCNC 1100 $8, Series 3 Personal CNC milling machine Vector technology spindle drive 1100W continuous, 2800W peak Table size: 34" x 9.5" Travel: 18" x 9.5" x 16.25" (X, Y, Z) High performance stepper motors with microstepping drivers Whether you re in R&D, education, manufacturing, or simply have a great idea for a product, you need an affordable precision machine to make things happen. The PCNC 1100 Series II offers the serious machining capability, backed by industrial quality, which is so necessary to bring your ideas to life. With unprecedented affordability and value, the open architecture design combines cast iron construction with personal computer technology to address a wide variety of needs. At over 1100 lbs and with a 5000 rpm spindle, the PCNC 1100 is fully capable of cutting iron, steel, titanium, and even chromium alloys like 300 or 400 series stainless. The machine s design is focused on the needs of prototyping, R&D, and small shop operations. The open design is better suited to combined manual and automatic operations than an enclosed VMC (vertical machining center), yet when combined with the Tormach machine stand you still have good chip and coolant containment and a clean shop. By limiting rapid motion to less than 100 IPM the machine is not only lower in cost, but also safer to operate. By replacing a conventional ATC (automatic tool changer) with the quick change Tormach Tooling System, the machine is both easier to afford and easier to maintain. Tooling cost is significantly lower, yet the tool change time is still less than 30 seconds. The machine is built to industrial standards and perfectly suited to work cells in a lean manufacturing environment or dedicated secondary operations. The PCNC 1100 is PC controlled, allowing your CAD and CAM software to coexist with the CNC control program. A single workstation takes your idea from concept to completion. Again, this reduces your machine cost and improves overall turnaround time. The control system uses standard industrial components and interfaces. This approach minimizes the initial cost, reduces maintenance cost, and virtually eliminates any risk of obsolescence. The combined effect gives you a highly reliable th Axis 6" Rotary Table Package, Tormach $1, Automatic Tool Changer, PCNC 1100 $4, Power Drawbar, PCNC 1100 $1, Scanner, Tormach CNC $ Stand, Deluxe Tormach PCNC 1100 CNC $1, Mill 5349 Milling Machine CNC, Tormach PCNC 440 $6, PCNC 440 milling machine PathPilot Control System 4" CNC Vise Basic TTS Tooling Set Other accessories A machine that fits all-around capability in a compact and affordable package, the PCNC 440 is perfect for anybody that wants to do real cutting, but doesn t have a lot of space. The PCNC 440 offers high-performance bipolar stepper motors with Leadshine micro stepping drivers. It also incorporates rolled C7 ball screws with anti-backlash double ball nuts. It has a cast iron frame and table with hand-scraped hydrodynamic ways and tapered adjustment gibs. The way surfaces are low friction PTFE-filled Acetyl bonded sliding surfaces similar to Rulon and Turcite. Page 13

14 CNC Machines: CNC Milling Machines Collets and Chucks: 3C Collets Collets and Chucks: 5C Collets 3829 Milling Machine CNC, Tormach PCNC 770 $6, Series 3 Personal CNC milling machine Vector technology spindle drive 750W continuous, 1300W peak Table size: 26" x 8" Travel: 13" x 7.5" x 13.25" (X, Y, Z) High performance stepper motors with microstepping drivers The PCNC 770 was designed from the ground up as a CNC mill for the materials you cut the most. With a 10,000 rpm spindle and 130 IPM maximum feed rates, the PCNC 770 is a top performer when it comes to aluminum, light metals, and plastic and still up to the task when you need to cut tough metals like stainless steel or titanium. Combined with a space-saving footprint, basic household 115 VAC power requirement, and innovative moving features, the versatile PCNC 770 is a perfect fit, no matter the size of your shop. The PCNC 770 is an affordable precision machine, designed for R&D, education, and hobbyists alike. It s got enough power and speed to get the job done, but with the flexibility that you need to adapt to a wide variety of projects prototyping, model making, customization even light production. The PCNC 770 is offered on an a la carte basis in order to meet the needs of a wide variety of users. The machine, computer, LCD and keyboard mount, stand, and 4th axis are each sold separately. We also offer CAD/CAM software, Tormach Tooling System, and a variety of helpful accessories. The base PCNC 770 mill comes without a stand or computer, but includes mill control software and all necessary cables Coolant Kit, Tormach PCNC 770 CNC Mill $ Stand, Tormach PCNC 770 CNC Mill $1, Automatic Tool Changer, PCNC 770 $4, PathPilot Machine Controller, Tormach $ Power Drawbar, PCNC 770 $1, Tooling Package, Tormach PCNC Mill $ Collet Closer, 7x10, 7x12 $ C collet closer for 7x10 and 7x12 mini lathes Includes a 3 Morse taper to 3C collet adapter and a drawtube assembly The adapter is precision ground to minimize runout.drawtube allows 7/16" material to pass through Collet Adapter, 3MT to 3C $ Collet Closer, 7x14 Mini Lathe $ Collet Closer, Universal $ Collet Set, 3C, Set of 7 $ Set of seven 3C round collets range in size from 1/8" to 1/2" by 16ths Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" Made of high grade tool steel Hardened and ground to close tolerance The thru bore of the collets is 0.467". The 1/2" collet is bored to 1/2" by 0.66" deep. All the other collets will pass the full material size through the length of the collet Collet, 3C, 1/8" $ Collet, 3C, 3/16" $ Collet, 3C, 1/4" $ Collet, 3C, 5/16" $ Collet, 3C, 3/8" $ Collet, 3C, 7/16" $ Collet, 3C, 1/2" $ Collet Block Set, Hex and Square $64.95 Holds standard 5C collets Economical indexing for 2, 3, 4, and 6 divisions Easy cross drilling at 60, 90 and 120 Made of hardened tool steel Ground square and parallel within " all over This set includes five pieces, the square block, the hexagonal block, two quick acting rings and the lever operated collet closer Collet Chuck for 5C Collets $ Plain back collet chuck mounts like a lathe chuck 5" (130 mm) diameter 1/16" to 1 1/8" capacity with appropriate collets Through hole is 1.231" This 5C collet chuck mounts with three holes for M8 cap screws. They are through drilled and counterbored for bolting on from the front. The registration inset is 95 mm in diameter Tap & Tap Drill Bit, M8x1.25 Metric Thread $ Collet Set, 5C, Set of 69 $ Set of 69 5C round collets range in size from 1/16" to 1-1/8" by 64ths Made of high grade tool steel Hardened and ground to close tolerance Internally threaded for a work stop 3842 Collet Set, 5C, Set of 17 $ Collet Set, 5C, Set of 33 $ Collet Set, 5C, Set of 6 $ Collet, 5C, 1/16" 4594 Collet, 5C, 1/8" 3670 Collet, 5C, 3/16" 3476 Collet, 5C, 1/4" 4595 Collet, 5C, 5/16" 3477 Collet, 5C, 3/8" 4596 Collet, 5C, 7/16" 3478 Collet, 5C, 1/2" 4597 Collet, 5C, 9/16" 3479 Collet, 5C, 5/8" 4598 Collet, 5C, 11/16" 3480 Collet, 5C, 3/4" 4599 Collet, 5C, 13/16" 3481 Collet, 5C, 7/8" 4600 Collet, 5C, 15/16" 3482 Collet, 5C, 1" 3619 Collet Stop, 5C Fully threaded adjustment screw Thread size: 3/8"-24 Speeds up repetitive work 5479 Mount, 5C for 3-Jaw Lathe Chucks, 4" $ " Adapter 5C adapter body 3 hole chuck mounting pattern is pre-drilled Hardened and ground 5C adapter with standard internal and external threads Mount, 5C for 3 & 4 Jaw Lathe Chucks, 3" $34.95 Collets and Chucks: Brown & Sharpe Collets 2999 Collet Set, 7BS, Set of 7 $87.95 Set of seven Brown & Sharpe 7 round collets Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" 3/8"-16 drawbar thread Made of high grade tool steel Hardened and ground to close tolerance Set of seven Browne & Sharpe round collets to fit spindles with a Browne & Sharpe taper. This set ranges from 1/8" to 1/2" by 16ths Collet, 7BS, 1/8" $ Collet, 7BS, 3/16" $ Collet, 7BS, 1/4" $ Collet, 7BS, 5/16" $ Collet, 7BS, 3/8" $ Collet, 7BS, 7/16" $ Collet, 7BS, 1/2" $12.95 Page 14

15 Collets and Chucks: Brown & Sharpe Collets Collets and Chucks: ER Collets 3011 Collet Set, 9BS, Set of 11 $ Set of eleven Brown & Sharpe 9 round collets Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4" 1/2"-13 drawbar thread Made of high grade tool steel Hardened and ground to close tolerance Set of eleven Browne & Sharpe round collets to fit spindles with a Browne & Sharpe taper. This set ranges from 1/8" to 3/4" by 16ths Collet, 9BS, 1/8" $ Collet, 9BS, 3/16" $ Collet, 9BS, 1/4" $ Collet, 9BS, 5/16" $ Collet, 9BS, 3/8" $ Collet, 9BS, 7/16" $ Collet, 9BS, 1/2" $ Collet, 9BS, 9/16" $ Collet, 9BS, 5/8" $ Collet, 9BS, 11/16" $ Collet, 9BS, 3/4" $ Collet & Chuck Set, ER-25, 2MT $ Includes nine ER-25 Collets 2 Morse taper shank 3/8"-16 drawbar thread Includes spanner wrench and fitted case Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", and 5/8" Collet and Chuck set for lathes with a 2 Morse taper spindle taper. Includes nine ER-25 collets, 3/8"-16 drawbar thread, spanner wrench and case Collet & Chuck Set, ER-32, 3MT $ Includes eleven ER-32 collets 3 Morse taper shank 3/8"-16 drawbar thread Includes spanner wrench and fitted case Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4" Collet and Chuck set for lathes with a 3 Morse taper spindle taper. Includes eleven ER-32 collets, 3/8"-16 drawbar thread, spanner wrench and case Collet Chuck, ER-32, 3MT $ Collet & Chuck Set, ER-32, R8 $ Includes eleven ER-32 collets R8 taper shank 7/16"-20 drawbar thread Spanner wrench Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4" Collet and Chuck set for mills with a R8 spindle taper. Includes eleven ER-32 collets, 7/16"-20 drawbar thread, spanner wrench but no case Collet Chuck, ER-16, Straight Shank, $59.95 Professional Grade 3/4" x 2 1/2" shank Tolerance is " maximum Balanced to 18,000 RPM Made of 20CrMnTi alloy steel Electroless nickle coating This ER-16 straight shank collet chuck is a great tool for holding small end mills and engravers.er-16 collets have a range of 1/32" to 3/8" (0.5 to 10.0 mm) 5188 Collet Chuck, ER-11, Straight Shank, $59.95 Professional Grade 2532 Collet Chuck, ER-32, 3" Diameter $99.95 Mounts on mini lathe spindle Shorter than standard 3-jaw chuck Allows 25/32" stock through the headstock of the mini lathe Concentricity.0002" This 3 diameter ER-32 collet chuck mounts on the lathe spindle in place of the lathe chuck or can be used as a fixture on a milling table. ER collet chucks range in size from 3/32" up to 13/16" so you can run 25/32" (the through hole on the lathe spindle is 0.800") stock through the headstock of your mini lathe. The outside diameter of the collet chuck is 80 mm. It has a 55 mm registration diameter and mounts with three M6 bolts on a 66 mm bolt circle. Remember to pick up a 45-52mm spanner wrench to go with this, Littlemachineshop.com item number Collet Chuck, ER-32, 4" Diameter $ Collet Nut, ER-32 $19.95 Fits ER-32 collet chucks This is an M-type M ER-32 collet chuck nut Collet Set, ER-16, Set of 6 $57.95 Set of 6 ER-16 round collets Sizes 1/16" to 3/8" by sixteenths Includes 1/16", 1/8", 3/16", 1/4", 5/16", and 3/8" Made of high grade tool steel Hardened and ground to close tolerance 2442 Collet Set, ER-20, Set of 3 $31.95 Includes 1/8", 1/4" and 3/8" collets Made of high grade tool steel Hardened and precision ground This set of ER-20 collets provides the basics you need for the Tormach Tooling System Collet Set, ER-25, Set of 15 $ Set of 15 ER-25 round collets Full range of collets hold all work sizes from 0.04" to 0.629" Made of high grade tool steel Hardened and ground to close tolerance Includes 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32, 3/8", 13/32", 7/16", 1/2", 17/32", 9/16", and 5/8" 2559 Collet Set, ER-32, Set of 18 $ Set of 18 ER-32 round collets Full range of collets hold all work sizes from 0.08" to 0.787" Made of high grade tool steel Hardened and ground to close tolerance Includes 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32, 3/8", 13/32, 7/16", 1/2", 17/32, 9/16", 5/8", 21/32, 11/16", 23/32, and 3/4" 2558 Collet Set, ER-32, Set of 11 $ Collet Set, ER-32, Set of 6 $ Collet Set, ER-40, Set of 24 $ Set of 24 ER-40 round collets Full range of collets hold all work sizes from 0.12" to 1.02" Made of high grade tool steel Hardened and ground to close tolerance Includes 1/8", 3/16", 7/32", 1/4", 5/16", 11/32, 3/8", 13/32, 7/16", 1/2", 17/32, 9/16", 5/8", 21/32, 11/16", 23/32, 3/4", 25/32", 13/16", 2732", 7/8", 15/16", 31/32" and 1" Page 15

16 Collets and Chucks: ER Collets Collets, ER-11 Individual Sizes Hardened and precision ground Made of high grade tool steel Collets, ER-32 Individual Sizes Precision ground hardened steel Made of high grade tool steel 4797 Collet, ER-11, 1/32" 4601 Collet, ER-11, 1/16" 4454 Collet, 1/8" ER Collet, ER-11, 3/16" 4456 Collet, 1/4" ER-11 Collets, ER-16 Individual Sizes Precision ground hardened steel Made of high grade tool steel 4437 Collet Set, ER-16, Set of 3 $ Collet, ER-16, 1/32" 4614 Collet, ER-16, 1/16" 4615 Collet, ER-16, 3/32" 4434 Collet, ER-16, 1/8" 4435 Collet, ER-16, 3/16" 4616 Collet, ER-16, 7/32" 4436 Collet, ER-16, 1/4" 4617 Collet, ER-16, 5/16" 4619 Collet, ER-16, 11/32" 4618 Collet, ER-16, 3/8" Collets, ER-20 Individual Sizes Precision ground hardened steel Made of high grade tool steel 4558 Collet, ER-32, 1/16" 4559 Collet, ER-32, 3/32" 4560 Collet, ER-32, 1/8" 4561 Collet, ER-32, 3/16" 4562 Collet, ER-32, 7/32" 4563 Collet, ER-32, 1/4" 4564 Collet, ER-32, 5/16" 4565 Collet, ER-32, 11/32" 4566 Collet, ER-32, 3/8" 4567 Collet, ER-32, 13/32" 4568 Collet, ER-32, 7/16" 4569 Collet, ER-32, 1/2" 4570 Collet, ER-32, 17/32" 4571 Collet, ER-32, 9/16" 4572 Collet, ER-32, 5/8" 4573 Collet, ER-32, 21/32" 4574 Collet, ER-32, 11/16" 4575 Collet, ER-32, 23/32" 4576 Collet, ER-32, 3/4" 4577 Collet, ER-32, 25/32" 4578 Collet, ER-32, 13/16" 5458 Rack, Collet, ER-32 $59.95 Holds 11 ER-32 Collets Supplied with mounting hardware Made from heavy duty steel 4620 Collet, ER-20, 1/16" 4621 Collet, ER-20, 3/32" 2443 Collet, ER-20, 1/8" 4622 Collet, ER-20, 3/16" 4623 Collet, ER-20, 7/32" 2444 Collet, ER-20, 1/4" 4624 Collet, ER-20, 5/16" 4625 Collet, ER-20, 11/32" 2445 Collet, ER-20, 3/8" 4626 Collet, ER-20, 13/32" 4627 Collet, ER-20, 7/16" 4628 Collet, ER-20, 1/2" Collets, ER-25 Individual Sizes Precision ground hardened steel Made of high grade tool steel 5053 Collet, ER-25, 1/16" 5054 Collet, ER-25, 3/32" 5055 Collet, ER-25, 1/8" 5056 Collet, ER-25, 3/16" 5057 Collet, ER-25, 7/32" 5058 Collet, ER-25, 1/4" 5059 Collet, ER-25, 5/16" 5060 Collet, ER-25, 11/32" 5061 Collet, ER-25, 3/8" 5062 Collet, ER-25, 13/32" 5063 Collet, ER-25, 7/16" 5064 Collet, ER-25, 1/2" 5065 Collet, ER-25, 17/32" 5066 Collet, ER-25, 9/16" 5067 Collet, ER-25, 5/8" 5454 Rack, Collet, ER-11 $ Rack, Collet, ER-16 $ Rack, Collet, ER-20 $ Rack, Collet, ER-25 $59.95 Collets and Chucks: Morse Taper Collets 1752 Collet Set, 2MT, Set of 7 $68.95 Set of seven 2 Morse taper round collets 1/8-1/2" x 16ths Drawbar thread: 3/8" - 16TPI Made of high grade tool steel Hardened and ground to close tolerance Set of seven 2 Morse taper round collets. Made of high grade tool steel these collets have been hardened and ground to close tolerance. Includes seven 2MT collets sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" Collet, 2MT, 1/8" 1746 Collet, 2MT, 3/16" 1747 Collet, 2MT, 1/4" 1748 Collet, 2MT, 5/16" 1749 Collet, 2MT, 3/8" 1750 Collet, 2MT, 7/16" 1751 Collet, 2MT, 1/2" Page 16

17 Collets and Chucks: Morse Taper Collets Collets and Chucks: R8 Collets 1948 Collet Set, 3MT, Set of 11 $ Set of eleven 3 Morse taper round collets Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4" Drawbar thread: 3/8"-16 Made of high grade tool steel Hardened and ground to close tolerance Set of eleven 3MT round collets that work with a wide variety of lathes. Made of high grade tool steel, hardened and ground to close tolerance Collet Set, 3MT, Set of 4 $ Collet Set, 3MT, Set of 7 $ Collet, 3MT, 1/8" $ Collet, 3MT, 3/16" $ Collet, 3MT, 1/4" $ Collet, 3MT, 5/16" $ Collet, 3MT, 3/8" $ Collet, 3MT, 7/16" $ Collet, 3MT, 1/2" $ Collet, 3MT, 9/16" $ Collet, 3MT, 5/8" $ Collet, 3MT, 11/16" $ Collet, 3MT, 3/4" $ Collet Set, R8, Set of 13, Professional $99.95 Grade Set of thirteen R8 round collets TIR less than " Sizes from 1/8" to 7/8" by 16ths Made of high grade tool steel Hardened and ground to close tolerance These are high precision professional grade collets with " runout or less Collet Set, R8, Set of 23 $ Set of 23 R8 round collets Sizes from 1/16" to 3/4" by 32nds Made of high grade tool steel Hardened and ground to close tolerance Set of eleven R8 round collets sized from 1/8" to 3/4" by 32nds provide maximum flexibility in tool fitting. Made of high grade steel, these collets have a 7/16" -20 internal drawbar threading Collet Set, R8, Set of 7 $ Collet Set, R8, Set of 11 $ Collet Set, R8, Set of 5 $ Collet Set, R8, Set of 6 $29.95 Collets, R8, Individual Sizes Hardened and ground to close tolerance Made of high grade tool steel 4543 Collet, R8, 1/8" 4310 Collet, R8, 3/16" 4486 Collet, R8, 1/4" 4554 Collet, R8, 5/16" 4487 Collet, R8, 3/8" 4555 Collet, R8, 7/16" 4488 Collet, R8, 1/2" 4556 Collet, R8, 9/16" 4489 Collet, R8, 5/8" 4557 Collet, R8, 11/16" 4490 Collet, R8, 3/4" 5001 Rotating Collet Rack, R8 $24.95 Holds 11 R8 collets Can be mounted anywhere for quick accessibility Made out of durable ABS plastic Great for small shops Collets and Chucks: Taig Collets 1915 Arbor, 3MT, Sherline/Taig Tooling $ /4-16 Threaded end fits Sherline and Taig chucks and tooling 3MT drawbar shank with 3/8"-16 drawbar thread Fits Taig collets and collet nut Note: For Sherline tooling a 1/8" thick flat washer must be used between the tool and arbor Arbor, 2MT, Sherline/Taig Tooling $ Collet Set, Taig $38.95 Collets and Chucks: Watchmakers Collets Collets, Watchmakers, Individual Sizes WW or 8 mm collets Made in USA by Starrett Products Body diameter is 0.315" (8 mm) Thread is 0.275" Collet, #10, 1 mm, Watchmakers $ Collet, #20, 2 mm, Watchmakers $ Collet, #40, 4 mm, Watchmakers $ Collet, #60, 6 mm, Watchmakers $ Collet, #70, 7 mm, Watchmakers $ Collet, #80, 8 mm, Watchmakers $13.95 Coolant Systems: Cutting Compounds 2236 Coolant, Kool Mist 77, Pint Safe for people Safe for materials Safe for the environment Safe for machines Kool Mist 77 coolant is highly recommended for mist cooling any metal or alloy where tougher machine conditions require greater lubricity. It is particularly useful where the material is very abrasive. Improves metal cutting, milling, turning, drilling, grinding, and sawing. You can also use Kool Mist 77 as a flood coolant. Kool Mist 77 is 100% synthetic and biodegradable, and meets the requirements of OSHA & EPA. This coolant will not cause rancidity or buildup and creates no rust or corrosion when diluted with clean water. Workpieces and machine parts remain clean and unstained. Mix this concentrate with 32 parts water before use. Makes over 4 gallons of coolant Coolant, Kool Mist 77, Gallon $ Cutting Compound, Nikx Stikx $5.95 Wax-based metal-cutting compound in 6" tube Extends tool life Lubricate saw blades, taps, drills, and hole saws Nikx Stikx is a non-hazardous solid metal-cutting compound that eases your task and extends the life of all metal cutting and threading tools. Cutting oils are combined with wax in a tube approximately 1" in diameter and 6" long.rub a little compound on the tool cutting edges. The compound heats up when cutting starts. The heated compound migrates to the tool cutting edge. The cutting compound helps prevent steel and aluminum from galling on the tool cutting edges.the compound works equally well on wood working tools by preventing wood pitch build-up and is a great lubricant for driving screws and lagbolts.craftsmen, electricians, plumbers, maintenance engineers and machinists welcome the product because it s convenient to use without fear of spillage Cutting Fluid, Re-Li-On, 4 Oz. $3.95 Engineered formula for cutting and tapping Extends tool life and controls chip welding Improves finishes and tolerances Safe and odorless Spray top for easy application Re-Li-On cutting and tapping fluid is a non-ozone depleting product that is safe on aluminum and exotic alloys such as stainless steel, hastelloy, inconel and titanium. The engineered formula clings to the cutting tool and provides strong lubrication Cutting Fluid, Re-Li-On, 16 Oz. $9.95 Page 17

18 Coolant Systems: Cutting Compounds Coolant Systems: Flood Systems 4243 Cutting Oil, Viper's Venom $ oz. bottle with applicator top This high sulfur content cutting oil was recommended to us by the guys at the Arthur R. Warner Co. They know high speed steel and they use this stuff in their shop.it's great for threading, tapping, turning and milling SpillMaster Container $5.95 Avoid workbench spills Holds cutting fluids and lubricants Won't spill, even when upside down Durable polyethylene for long life Includes applicator brush 3952 Coolant Hose on Magnetic Base $19.95 Great for flood coolant applications 1/4" ID flexible coolant hoses with shut off On/off switchable magnetic base 3660 Coolant Hose on Magnetic Base $39.95 Great for flood coolant applications Two 1/4" ID flexible coolant hoses with individual shut offs On/off switchable magnetic base 4551 Coolant Hose Set, Modular, 1/4" ID $ " length of 1/4" ID modular coolant hose 1/16", 1/8", 1/4" nozzles 1/8" NPT and 1/4" NPT connectors This is a starter set for modular coolant hose Coolant Hose Plier, Modular 1/4" ID $ Coolant Hose Valve, Modular 1/4" ID $ Coolant Hose Valve, Modular 1/4" ID $ Coolant Hose, Modular 1/4" ID, 12" Long $ Coolant Hose, Steel with Magnetic Base $ /8" diameter X 13" long steel nozzled hose Flow control valve On/off switchable magnetic base Magnetic base dimensions: 2.36" x 1.97" x 2.17" 4657 Coolant Tank and Pump $ gallons (12 liters) per minute Tank is 19.7" x 11.8" x 9.3" tall Includes magnetic base and 18" modular hose This flood coolant tank and pump is good for small mills, lathes, and band saws. Power: 120V 60Hz 3520 Flood Coolant Unit $ Includes tank, pump, hose, and nozzle Delivers up to 100 GPH Flow can be regulated without harming pump Screen and chip collector easily removed for cleaning Tank is oil resistant polyethelene This coolant pump and tank unit is great for bench top milling machines. It is compact (the tank holds 1 gallon) and easy to use and clean.power: 120V 60Hz 80 watts 3521 Flood Coolant Unit & Coolant $ Coolant Systems: Lubricants Coolant Systems: Mist Systems 3195 M1 Lubricant, 12 oz. Aerosol Can, $9.95 Starrett Starrett M1 all-purpose lubricant in 12 oz. Aerosol can Must be shipped by ground; not available outside the continental US M1 is the "modern one" - the superior alternative. It dries and will not attract dirt or other contaminants as other leading lubricants do. Simultaneously dries as it protects, avoiding dirt and grime. Dries to leave a film that protects and lubricates. Lubricates without silicone. Penetrates to quickly to free frozen nuts, bolts and metal parts. Prevents rust and corrosion damage by providing a molecular shield that locks to the metal. Non-soluble in water so it displaces moisture to lift it away from the surface to be protected. Nonconductive, preventing short circuits. Applications for industry are nearly endless. Protect working surfaces of machinery; use in dip tanks to protect production parts in process, or apply on tools when stored. M1 is also ideal in highly corrosive situations that destroy metal equipment used in marine environments M1 Lubricant, Case of 12 Aerosol Cans, $99.95 Starrett 1825 Tool and Instrument Oil, Starrett $8.90 Starrett catalog number 1620 This oil is the same extra-fine lubricant made to Starrett specifications and used in the Starrett factory to lubricate and protect their precision measuring tools and instruments. It is also perfect for all mechanics, homeowners, hobbyists, and sportsmen who require the finest all-purpose oil. Special highrefining makes Starrett Tool and Instrument Oil colorless, ensures thorough lubrication of close-fitting parts at high temperatures and below zero, and provides a strong lasting film over all areas requiring protection against rust. This oil has not been adulterated by additives for color and odor FogBuster Sprayer Coolant System with $ Tank, 1 Outlet FogBuster model with one spray oultet 1/2 gallon clear coolant tank Stainless steel handle, nozzle with magnetic stand, and pressure regulator Reduces airborne pollutants in shop Half-gallon models are the ideal size for many coolant and lubricant applications. Coolant level can be easily viewed through the clear reservoir. The provided stainless steel handle makes mounting or carrying quick and easy. The hose from tank to nozzle is 5 feet long. Unlike other mist coolant systems, the FogBuster does not atomize coolant at the nozzle tip. Coolant is carried accurately with the air stream after leaving the nozzle and will produce a small spray pattern from several inches from its target. Greater cooling and lubrication is achieved along with a reduction in coolant waste because virtually all of the coolant is being utilized on the part and tool. FogBuster offers a wide range of coolant and air flows, will spray virtually any type of coolant or lubricant, and its unique high volume low pressure design operates on only 10 to 20 PSI. Coolant flow is easily adjusted by a precision needle valve at the sprayer head, and can be set from very small amounts to a heavy spray to suit your job application. Air flow is adjusted at the air pressure regulator, and once flows are set sprayer operation is instant with the flip of an air toggle switch conveniently located on your machine or when called for in a program. Just hook up your air compressor Lathe Mount for FogBuster Mist Unit $32.95 Page 18

19 Coolant Systems: Mist Systems Cutting Tools: Boring Bars 2965 Mist Coolant System with Tank, 1 Outlet $ Kool Mist model 100NF12 with one spray outlet 12" Lock-Line spray positioner Heavy duty magnetic base 1 gallon stainless steel coolant tank Adjustable coolant nozzle and 4' coolant hose This spray mist unit has a 1/8" NPT thread for your compressed air supply. (You furnish the air compressor.) 3458 Mist Coolant System with Tank, 2 Outlets $ Mist Coolant System with Tank, 1 Outlet $ plus Kool Mist PORTaMIST Spray Mist Unit 12" $ Kool Mist model 60M12 12" Lock-Line spray positioner Heavy duty magnetic base Adjustable coolant nozzle 4' coolant and air hoses This spray mist unit has a male 1/8" NPT thread for your compressed air supply. (You furnish the air compressor.) Includes a sample of Kool Mist PORTaMIST Spray Mist Unit 18" $ Spra-Kool Midget Mist Coolant Spray Unit $35.95 For turning, drilling, milling, sawing, and grinding Designed to be moved from machine to machine Adjustable nozzle for precise aim Adjustable spray volume Removable strainer prevents clogs The Spra-Kool Midget unit has successfully been used for over 30 years as a versatile, economical method of applying a coolant spray for machining. The Spra-Kool unit works on 30 to 150 PSI air pressure. (You furnish the air compressor.) Only solid brass fittings are used. There is nothing to rust or corrode. The system is suitable for use with any type of soluble coolant or oil Spra-Kool Midget Mist Coolant Spray Unit $39.95 & Coolant 1246 Boring Bar Set, 3/8" Shank, Carbide $19.95 Set of nine boring bars - 3 lengths for each min. bore size Shank diameter 3/8" Hardened and ground to Shanks are made of special heat treated alloy steel Designed so the same bar can bore flat This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to to " from the nominal diameter. The holder may vary from that shown in the photo Boring Bar Set, 1/2" Shank, Carbide $ Boring Bar Set, 1/2" Shank, Carbide with $28.95 Holder for Mini Lathe 2682 Boring Bar Set, 1/2" Shank, HSS $ Boring Bar Set, 3/4" Shank, Carbide $ Boring Bar Set, 3/8" Shank, HSS $ Boring Bar, 3/8" Indexable, 80 Deg HSS $79.00 Diamond Inserts, A R Warner 3/8" diameter, 5" long boring bar 3 CEMW high speed steel inserts 1 extra Torx screw 1 wrench This Arthur R. Warner Co. precision boring bar uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.the minimum boring diameter is 0.330".The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Boring Bar, 3/8" Indexable, HSS Triangle $79.00 Inserts, A R Warner 3/8" diameter, 5" long boring bar with TPMW insert 2 extra TPMW high speed steel inserts 1 extra Torx screw 1 wrench This Arthur R. Warner Co. precision boring bar uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Boring Bar, 1/2" Indexable, HSS Triangle $84.00 Inserts, A R Warner 5605 Boring Bar, 3/8" Indexable, S06H-SCLCR- $ , Tormach Designation: S06H-SCLCR-2 Steel shank 3/8" x 4" Designed for CCMT and CCGT inserts Approach 95, 7 relief angle Insert Shape: 80 Rhombus (C) Right hand Boring Bar. Includes wrenches and (1) insert Boring Bar, 1/2" Indexable, S08M-SCLCL- $ , Tormach 5607 Boring Bar, 1/2" Indexable, S08M-SCLCR- $ , Tormach 5606 Boring Bar, 3/8" Indexable, S06H-SCLCL-2, $28.95 Tormach 1779 Boring Bar, 3/8" Indexable, S-SCLCR6-2 $34.95 Profiling bars for semi-finishing and finishing operations Designed for CCMT 80 inserts 7 Relief angle Negative 5 Lead angle for boring 3 Side & end cutting edge angle This 3/8" diameter indexable boring bar for sale uses CCMT inserts. Minimum bore diameter is 0.50" Use CCMT or CCMT inserts with this boring bar set Boring Bar, 1/2" Indexable, S-SCLCR8-3 $ Boring Bar, 5/16" Indexable, S-SCLCR4-2 $ Boring Bar, 5/16" Indexable, S05 $29.95 SCLCR06, Reduced Neck 5435 Boring Bars, Indexable, 80 Deg Diamond $86.95 Inserts, 3 Piece 3 piece set, 5/16", 3/8" and 1/2" diameter Uses CCMT 80 degree diamond inserts 7 degree relief angle, negative 5 degree lead angle for boring 3 degree side and end cutting edge angle Torx wrench and CCMT inserts included Boring bars for semi-finishing and finishing operations.the 5/16" diameter bar is 4" long.the 3/8" diameter bar is 6" long.the 1/2" diameter bar is 7.75" long Boring Head Set, R8 $99.95 Includes boring head, R8 shank, and 9-piece boring bar set 2" diameter boring head holds 1/2" shank boring bars The boring head offsets up to 5/8", dial is graduated in 0.001" Minimum bore diameter is 5/16" Maximum bore depth is 3" The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are held to to " from the nominal diameter Boring Head Set, 3MT $99.95 Page 19

20 Cutting Tools: Boring Bars Cutting Tools: Broaches Cutting Tools: Counterbores 5403 Boring Head Set, R8 Professional Grade $ Offset: 5/8", Crosshole: 1/2" Shank thread: 7/16"-20 UNC Min/Max boring diameter: 0.394" / 5.906" Max boring depth: 1.970" Rugged design allows excellent rigity for chatter-free boring. Head features a threaded back for multiple shanks exchangeable. Set complet with boring head, boring shank, carbide tipped boring bars & L-shape Hex Wrenches. Dial on head with 0.001" graduation for accurate hole sizing Boring Head Set, 2MT Professional Grade $ Keyway Broach Set, 9 Piece $ Broaches: 1/16" - A, 3/32" - A & 1/8" - A 5 Collared Bushings; 1 Shim Heavy duty HSS 15 Keyway combinations Provides great versatility The easiest way to cut a keyway is with a broach. This set includes 9 pieces for 15 keyway combinations. Made of heavy duty high speed steel.broach style: AKeyway Size: 1/16" - Collared bushing 1/4", 5/16"Keyway Size: 3/32" - Collared bushing 3/8", 7/16"Keyway Size: 1/8" - Collared bushing 1/2" 5622 Rotary Broach Tool Holder $ Creates square and hexagonal, blind or through holes Broach depth to 1.5 times broach width Mounts to 33 Jacobs taper arbor Adjustment free style meaning the setup time is as fast and easy as possible The rotary broach creates square and hexagonal, blind or through holes. It can be used in a milling machine or a lathe.the broaching depth can be up to 1.5 times the dimension across the flats of the shape you want to broach. For example, you can broach a ¼" square hole up to 0.375" deep.the material to be broached should not be harder than 200 Brinell. This means you can broach aluminum, brass, bronze, soft cast iron, and mild steel. In general, you are safe with any steel where the last two digits of the AISI number are less than 30.The rotary broach tool holder is a lot like a live center. There is a bearing between the tool and the shank. But the tool is mounted at a 1-degree angle to the shank. So as the shank rotates, it "wobbles" the cutting tool. This 1-degree wobble advances each of the facet cutting edges in turn as the broach advances into the hole. The material that is removed curls into the bottom of the hole. Rotary Broaches, Individual Sizes Creates hex or square blind or through holes Broach depth to 1.5 times broach width Use with rotary broach tool holder 3921 Rotary Broach, 3/16" Hex $ Counterbore Set, 3 Flute HSS, Set of 7 $66.95 Sizes #6, #8, #10, 1/4", 5/16", 3/8", and 1/2" Continuous pilot counterbores Pilot extends the full length of the flute Made of High Speed Steel Continuous pilot counterbores cut rapidly, smoothly, and accurately, producing long spiraling chips rather than small metal particles. The pilot extends the full length of the flute portion of the tool. As cutter flutes are ground back due to wear, a new section of pilot becomes exposed. The pilot head may be cut off to any desired length when repeated sharpening makes it too long for practical use. Continuous pilot counterbores have a life many times that of the conventional type counterbore. Cutting Tools: Countersinks Cutting Tools: Cut-Off Tools 5389 Interchangeable Pilot Counterbore Set, $89.95 HSS, 21 Piece 6 counterbores 14 pilots Straight shanks 1 holder: 3/8" shank High speed steel 21 Piece interchangeable pilot counterbore set used in spot facing and counterboring operations. Kit includes:1 holder with 3/8" shank6 counterbores, sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8"14 Pilots: 5/32" Shank: 0.187, 0.204, 0.213, 0.229, 1/4, 17/64, 9/32, 5/16, 21/64, 11/32, 3/8, 25/64, 13/32 & 7/16" 4540 Countersink Set, Single Flute 82 Degree, $25.95 Set of 4 High speed steel single flute countersinks For steel, brass, and aluminum 82 degree point angle 1/4", 3/8", 1/2", and 3/4" diameter countersinks Use 82 degree countersinks for deburring and for flat head screws Countersink Set, Single Flute 82 Degree, $16.95 Set of Countersink, 82 Degree, 1/4" Single Flute $ Countersink, 82 Degree, 3/8" Single Flute $ Countersink, 82 Degree, 1/2" Single Flute $ Countersink, 82 Degree, 3/4" Single Flute 4542 Countersink Set, Zero-Flute 82 Degree, $36.95 Set of 5 High speed steel pilotless countersinks and deburring tools Cam relieved for chatter free cutting For mild steel, brass, aluminum, and plastics 82 degree point angle Includes sizes 0 through 4 Use 82 degree countersinks for deburring and for flat head screws.these countersinks can be resharpened with a small mounted grinding wheel in the hole.sizes 0, 1, and 2 have a 1/4" diameter shank. Sizes 3 and 4 have a 1/2" diameter shank Cut-Off Blade, 1/32" $12.95 T-15 High Speed Steel Width:.032", Height:.218", Length: 3.0" Used on 5106, 5107, and 5130 grooving & cut-off tools 0.032" x 0.218" x 3" M2 HSS cut-off blade.this is a premium American-made M2 high speed steel cut-off blade from the Arthur R. Warner Co.This is a replacement blade for 5106, 5107, and 5130 grooving & cut-off tools.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pregrinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Cut-Off Blade, 1/16" $ Cut-Off Blade, P1 Carbide Tipped $59.95 This blade is size P1 Two micro grain carbide tips brazed on 1/16" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance Cut-Off Blade, P2 Indexable $49.95 This blade is size P2 Fits 0XA and AXA cut-off holders Uses GTN-2, GTL-2 or GTR-2 inserts Includes one GTN-2 insert 0.072" x 1/2" x 4-11/32" M2 HSS cut-off blade. GTx-2 inserts have a 2mm (0.078") cutting width. Page 20

21 Cutting Tools: Cut-Off Tools Cutting Tools: Drill Sets Cut-Off Blades, High Speed Steel 1/2" x 4-1/2" M2 HSS cut-off blades These T-shape parting blades provide great side clearance P1N blades are 0.040" wide P1 Blades are 1/16" (0.063") wide P1X blades are 5/64" (0.078") wide We carry both imported M2 blades and premium American-made M2 high speed steel cut-off blades from the Arthur R. Warner Co Cut-Off Blade, P1 $ Cut-Off Blade, P1, M2 HSS $ Cut-Off Blade, P1N $ Cut-Off Blade, P1N, M2 HSS $ Cut-Off Blade, P1X $ Cut-Off Tool Holder, SGTHR9.5-2 $29.95 Holder style Uses GTN-2, GTL-2 or GTR-2 inserts 3/8" x 3/8" shank size.087" &.094" insert width 1.10" maximum work diameter 4819 Grooving & Cut-Off Tool, 1/2" Indexable $ HSS Inserts, A R Warner For external grooving and cut-off operations Includes two 1/16" (.062") groover T-15 high speed steel inserts Includes two 1/32" (.031") groover T-15 high speed steel inserts Includes two 1/64" (.016") groover T-15 high speed steel inserts Includes two IS 3007 screws and one T-9 wrench This Arthur R. Warner Co. grooving and cut-off tool has a 0.500" shank and is 4.375" long.the maximum cutting depth of the groover inserts is approximately 0.25". This tool can be used for both right hand and left hand operations as it will accommodate an insert on either side of the tool.each pair of inserts includes one left hand insert and one right hand insert.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Grooving & Cut-Off Tool, 3/8" Indexable $95.00 HSS Inserts, A R Warner 5107 Grooving & Cut-Off Tool, 3/8" Shank, HSS $70.00 Blade For external grooving and cutoff operations Includes one 3/8" shank holder 3" overall length Includes one 0.062" cut-off blade T-15 high speed steel Includes one 7/64" Allen wrench The blade is 0.218" tall and 3" long.made in the US by the Arthur R. Warner Co.The Arthur R. Warner Co. is a familyowned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Grooving & Cut-Off Tool, 5/16" Shank, HSS $68.00 Blade 5130 Grooving & Cut-Off, 1/2" Shank, HSS $80.00 Blades 3418 Drill Set, 115 Piece Jobber Length Cobalt $ Steel Made in USA Bronze color finish 135º split point 115 Piece cobalt steel drill set.set includes 1/16" - 1/2" by 64ths, A - Z, and No Cobalt drills display higher red hardness and are especially effective in drilling hard or abrasive materials.these are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.includes a metal index for storing the drills Drill Set, 115 Piece Jobber Length HSS $ º point Surface treated black finish Jobber Length Straight Shank 115 Piece high speed steel drill set. Set includes 1/16" - 1/2" by 64ths, A - Z, and No These are jobber length drills with straight shanks. Jobber length drills are normal length drills. Includes a metal index for storing the drills Drill Set, #1-60 Jobber Length HSS $ Drill Set, 29 Piece Jobber Length HSS $ Drill Set, A-Z Jobber Length HSS $ Drill Set, #61-80 Jobber Length HSS $ Drill Set, 115 Piece Screw Machine Length $ HSS Made in USA Surface treated black finish Heavy duty 135º split point 115 Piece high speed steel machine screw set. Screw Machine Drill Bit Set includes 1/16" - 1/2" by 64ths, A - Z, and No These are screw machine length drills with straight shanks. Screw machine length drills are 5/8 as long as normal jobberlength drills. These shorter drill bits are useful on mini lathes and mini mills where there isn't much distance for tools. Includes a Huot metal index for storing the drills Drill Set, #1-60 Screw Machine Length HSS $ Drill Set, 29 Piece Jobber Length HSS $ Drill Set, 29 Piece Screw Machine Length $74.95 HSS 2831 Drill Set, 19 Piece Metric Jobber Length $69.95 HSS Made in USA Bright finish 118º point 19 Piece metric high speed steel drill set.set includes 1.0 mm mm by 0.5 mm.these are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.includes a Huot metal index for storing the drills Drill Set, 29 Piece Turbomax Tip $ /16" through 1/2" by 1/64" Revolutionary tip design stays sharper longer and drills up to 28 percent faster Three-flatted shank design provides better chuck grip and reduces slippage M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance Gold oxide finish. Made in US High speed steel drill bit set with Turbo Point tip. 29-piece set in metal index case includes drill bit sizes 1/16" through 1/2" in 1/64" increments. These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are normal length drills. Three-flatted shank design is ideal for use in keyless chucks Drill Set, 21 Piece Turbomax Tip $ Tap & Drill Combo Set, 18 Pieces HSS $49.95 High speed steel taps and drill bits Drill bits are matched with taps for quick use Includes 6-32, 8-32, 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, and 1/2"-13 HSS taps Includes #36, #29, #25, #21, #7, F, 5/16", U, and 27/64" HSS drill bits This set makes tapping common thread sizes a breeze. No need to get out your reading glasses to check those pesky drill charts any more. With this kit you'll be able to grab the correct drill bit and tap and go to work immediately. Page 21

22 Cutting Tools: Drill Sets Cutting Tools: Drills Cutting Tools: End Mills 5837 Tap & Drill Combo Set, 18 Pieces HSS, $49.95 Metric High speed steel taps and drill bits Drill bits are matched with taps for quick use Includes M2.5x0.45, M3x0.5, M3.5x0.6, M4x0.7, M5x0.8, M6x1.0, M8x1.25, M10x1.5, and M12x1.75 taps. Includes 2.05mm, 2.5mm, 2.9mm, 3.3mm, 4.2mm, 5.0mm, 6.7mm, 8.5mm and 10.2mm HSS drill bits This set makes tapping common thread sizes a breeze. No need to get out your reading glasses to check those pesky drill charts any more. With this kit you'll be able to grab the correct drill bit and tap and go to work immediately Center Drills, Cobalt, Set of 5 (Numbers 1- $ ) Combined drill and countersink Sizes 1, 2, 3, 4 & 5 M42 (8% cobalt) high speed steel 60 included angle Right hand cutting direction This set includes five different sizes of combined drills and countersinks, commonly called center drills. They are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander. The set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills with a right hand cutting direction. Each center drill is made of ground high speed M42 cobalt steel for good wear resistance Center Drill, Number 1, Cobalt $ Center Drill, Number 2, Cobalt $ Center Drill, Number 3, Cobalt $ Center Drill, Number 4, Cobalt $ Center Drill, Number 5, Cobalt $ Center Drills, HSS, Set of 5 (Numbers 1-5) $7.95 Combined drill and countersink Sizes 1, 2, 3, 4 & 5 High speed steel 60 included angle Right hand cutting direction This set includes five different sizes of combined drills and countersinks, commonly called center drills. They are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander. The set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills with a right hand cutting direction. Each center drill is made of ground high speed steel for good wear resistance with a hardness rating of Rc Center Drills, HSS, Set of 4 (Numbers 1-4) $ Center Drill, Number 1, HSS $ Center Drill, Number 2, HSS $ Center Drill, Number 3, HSS $ Center Drill, Number 4, HSS $ Center Drill, Number 5, HSS $2.95 Corner Rounding End Mills, HSS, Individual Sizes Formed Radius Cutters with right hand cut Resharpen without changing form Straight flutes Weldon Shank Intended for use in rounding off sharp corners. Form-relieved type corner rounding end mills may be sharpened many times without changing the form of the radius. Non-center, right hand cutting with straight flutes and a weldon shank Corner Rounding End Mill, 1/16", HSS 5138 Corner Rounding End Mill, 1/8", HSS 5139 Corner Rounding End Mill, 1/4", HSS $19.95 Drill-Mills 90 Degree, 2-Flute, Cobalt, Individual Sizes 90 Degree angle Cobalt steel For spotting, chamfering, grooving For aluminum Drill-mills work best on aluminum. They can be used for spotting holes instead of using a center drill; and are great for chamfering edges. Use a drill-mill to make a 90 degree angle groove Drill-Mill, 90 Degree, 1/4" 2 Flute, Cobalt $ Drill-Mill, 90 Degree, 3/8" 2 Flute, Cobalt $ Drill-Mill, 90 Degree, 1/2" 2 Flute, Cobalt $ End Mill Set, 10 pieces 2 & 4 Flute, TiN $42.95 coated HSS 10 piece TiN coated HSS end mill set Includes both 2 flute and 4 flute end mills Center cutting end mills Includes 1/4", 3/8", 1/2", 5/8", and 3/4" end mills This 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The 1/4" and 3/8" end mills have a 3/8" shank. The 1/2" end mills have a 1/2" shank. The 5/8" end mills have a 5/8" shank. The 3/4" end mills have a 3/4" shank. The set comes in a fitted case End Mill Set, 20 pieces 2 & 4 Flute, TiN $82.95 coated HSS 20 piece TiN coated HSS end mill set Includes both 2 flute and 4 flute end mills Center cutting end mills 3/16" to 3/4" by 16ths The LittleMachineShop piece TiN coated HSS end mill set includes both 2 & 4 flute end mills. The 3/16" through 7/16" end mills have a 3/8" shank. The 1/2" and 9/16" end mills have a 1/2" shank. The 5/8" and 11/16" end mills have a 5/8" shank. The 3/4" end mill has a 3/4" shank. The HSS end mill set comes in a fitted case End Mill Set, 6 Piece 2 Flute, Cobalt $ piece M42 8% cobalt end mill set 2 flute end mills Center cutting end mills Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills The smaller end mills have 3/8" shanks, the 1/2" end mill has a 1/2" shank. The set comes in a wood stand End Mill Set, 6 Piece 4 Flute, Cobalt $ End Mill Set, 6 Piece 2 Flute, HSS $ piece HSS end mill set 2 flute end mills Center cutting end mills Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills All end mills have 3/8" shank. 6 Piece 2 flute high speed steel end mill set (3/8" shank, center cut, high speed steel and single ended.) The set comes with a wooden stand. Sizes: 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2" End Mill Set, 6 Piece 4 Flute Ball, HSS $ End Mill Set, 6 Piece 4 Flute, HSS $ End Mill Set, 6 Piece 2 Flute Ball, HSS $ End Mill Set, Miniature, 10 pieces 2 & 4 $54.95 Flute, HSS 10 piece miniature HSS end mill set Includes both 2 flute and 4 flute end mills Double ended, center cutting end mills Includes 1/16", 3/32", 1/8", 5/32", and 3/16 end mills All end mills have 3/16" shank The set comes in a wood stand End Mill Set, Miniature, 5 pieces 2 Flute $34.95 Page 22

23 Cutting Tools: End Mills End Mills, 2 Flute Ball, Cobalt, Individual Sizes Single ball end, 2 flute M42 (8%) cobalt 5415 End Mill, 1/8" 2 Flute Ball, M42 Cobalt $ End Mill, 3/16" 2 Flute Ball, M42 Cobalt $ End Mill, 1/4" 2 Flute Ball, M42 Cobalt $ End Mill, 3/8" 2 Flute Ball, M42 Cobalt $ End Mill, 1/2" 2 Flute Ball, M42 Cobalt $24.95 End Mills, 2 Flute, HSS, Individual Sizes HSS 2 flute end mills Center cutting Single End Weldon Shank Single end 2 flute center cut end mill ground from solid high speed steel. Used for removing material from a workpiece and leaving a smooth finish End Mill, 1/8" 2 Flute, HSS $ End Mill, 3/16" 2 Flute, HSS $ End Mill, 1/4" 2 Flute, HSS $ End Mill, 5/16" 2 Flute, HSS $ End Mill, 3/8" 2 Flute, HSS $ End Mill, 7/16" 2 Flute, HSS $ End Mill, 1/2" 2 Flute, HSS, 3/8" shank 5147 End Mill, 1/2" 2 Flute, HSS 5148 End Mill, 9/16" 2 Flute, HSS $ End Mill, 5/8" 2 Flute, HSS, 1/2" shank $ End Mill, 5/8" 2 Flute, HSS $ End Mill, 3/4" 2 Flute, HSS, 1/2" shank 5152 End Mill, 3/4" 2 Flute, HSS 5153 End Mill, 1" 2 Flute, HSS, 1/2" shank $19.95 End Mills, 2 Flute, M42 Cobalt, Coated, Individual Sizes M42 8% cobalt 2 flute end mills Center cutting, regular length 3/8" shank Made in the USA These are high quality, American made, cobalt end mills for general milling operations including slots, grooves and other similar features. They are gound from solid M42 8% cobalt steel. The cutting areas are TiCN coated. These CNC qualified end mills feature a spiral flute design for a faster and smoother cutting action End Mill, 1/8" 2 Flute, M42 Cobalt TiCN $23.95 Coated 4890 End Mill, 3/16" 2 Flute, M42 Cobalt TiCN $23.95 Coated 4891 End Mill, 1/4" 2 Flute, M42 Cobalt TiN $23.95 Coated 4892 End Mill, 5/16" 2 Flute, M42 Cobalt TiN $25.95 Coated 4893 End Mill, 3/8" 2 Flute, M42 Cobalt TiN $25.95 Coated 4894 End Mill, 7/16" 2 Flute, M42 Cobalt TiN $37.95 Coated 4895 End Mill, 1/2" 2 Flute, M42 Cobalt TiN $42.95 Coated End Mills, 2 Flute, M42 Cobalt, Individual Sizes Single ended, 2 flute Weldon shank M42 (8%) cobalt Single end 2 flute center cut end mill ground from M42 (8%) cobalt. Used for removing material from a workpiece and leaving a smooth finish. The 2 flute design allows for greater swarf removal but at a lower speed. If higher speed is required or less material is to be removed, consider our 4 flute end mills End Mill, 1/8" 2 Flute, M42 Cobalt 5421 End Mill, 3/16" 2 Flute, M42 Cobalt 5422 End Mill, 1/4" 2 Flute, M42 Cobalt 5423 End Mill, 5/16" 2 Flute, M42 Cobalt 5424 End Mill, 3/8" 2 Flute, M42 Cobalt 5425 End Mill, 7/16" 2 Flute, M42 Cobalt 5426 End Mill, 1/2" 2 Flute, M42 Cobalt $12.95 End Mills, 4 Flute, HSS, Individual Sizes HSS 4 flute end mills Center cutting Single End Weldon Shank Single end 4 flute center cut end mill ground from solid high speed steel. Used for removing material from a workpiece and leaving a smooth finish End Mill, 1/8" 4 Flute, HSS $ End Mill, 3/16" 4 Flute, HSS $ End Mill, 1/4" 4 Flute, HSS $ End Mill, 5/16" 4 Flute, HSS $ End Mill, 3/8" 4 Flute, HSS $ End Mill, 7/16" 4 Flute, HSS $ End Mill, 1/2" 4 Flute, HSS, 3/8" shank 5161 End Mill, 1/2" 4 Flute, HSS $ End Mill, 9/16" 4 Flute, HSS $ End Mill, 5/8" 4 Flute, HSS, 1/2" shank $ End Mill, 5/8" 4 Flute, HSS 5165 End Mill, 3/4" 4 Flute, HSS, 1/2" shank $ End Mill, 3/4" 4 Flute, HSS $ End Mill, 1" 4 Flute, HSS, 1/2" shank $27.95 End Mills, 4 Flute, M42 Cobalt, Coated, Individual Sizes M42 8% cobalt 4 flute end mills Center cutting 3/8" shank Made in the USA These are high quality, American made, cobalt end mills for general milling operations including slots, grooves and other similar features. They are gound from solid M42 8% cobalt steel. The cutting areas are either Titanium Nitride (TiN) or Titanium CarboNitride (TiCN) coated. These CNC qualified end mills feature a spiral flute design for a faster and smoother cutting action End Mill, 1/8" 4 Flute, M42 Cobalt TiCN $24.95 Coated 4897 End Mill, 3/16" 4 Flute, M42 Cobalt $ End Mill, 1/4" 4 Flute, M42 Cobalt TiN $23.95 Coated 4899 End Mill, 5/16" 4 Flute, M42 Cobalt TiCN $25.95 Coated 4900 End Mill, 3/8" 4 Flute, M42 Cobalt TiN $27.95 Coated 4901 End Mill, 7/16" 4 Flute, M42 Cobalt TiN $37.95 Coated 4902 End Mill, 1/2" 4 Flute, M42 Cobalt TiN $46.95 Coated Page 23

24 Cutting Tools: End Mills End Mills, 4 Flute, M42 Cobalt, Individual Sizes Single ended, 4 flute Weldon shank M42 (8%) cobalt Single end 4 flute center cut end mill ground from M42 (8%) cobalt. Used for removing material from a workpiece and leaving a smooth finish. The 4 flute design allows for a high feed rate as less material is removed per flute. If greater swarf removal is desired, consider one of our 2 flute end mills End Mill, 1/8" 4 Flute, M42 Cobalt 5558 End Mill, 3/16" 4 Flute, M42 Cobalt 5559 End Mill, 1/4" 4 Flute, M42 Cobalt 5560 End Mill, 5/16" 4 Flute, M42 Cobalt 5561 End Mill, 3/8" 4 Flute, M42 Cobalt $ End Mill, 7/16" 4 Flute, M42 Cobalt $ End Mill, 1/2" 4 Flute, M42 Cobalt $15.95 End Mills, Miniature, 2 Flute, Double Ended HSS, Individual Sizes Double ended, 2 flute miniature end mills High Speed Steel 2-1/4" overall length 3/16" Shank diameter Popular for small slotting, engraving, pocketing and simmilar applications. The medium-high helix angle produces an ideal shearing cut for outstanding performance End Mill, Miniature, 1/16" 2 Flute, Double $5.95 Ended, HSS 5406 End Mill, Miniature, 3/32" 2 Flute, Double $5.95 Ended, HSS 5407 End Mill, Miniature, 1/8" 2 Flute, Double $5.95 Ended, HSS 5408 End Mill, Miniature, 5/32" 2 Flute, Double $5.95 Ended, HSS 5409 End Mill, Miniature, 3/16" 2 Flute, Double $5.95 Ended, HSS End Mills, Miniature, 4 Flute, Double Ended HSS, Individual Sizes Double ended, 4 Flute miniature end mills High Speed Steel 2-1/4" overall length Popular for small slotting, engraving, pocketing and simmilar applications. The medium-high helix angle produces an ideal shearing cut for outstanding performance End Mill, Miniature, 1/16" 4 Flute, Double $5.95 Ended, HSS 5411 End Mill, Miniature, 3/32" 4 Flute, Double $5.95 Ended, HSS 5412 End Mill, Miniature, 1/8" 4 Flute, Double $5.95 Ended, HSS 5413 End Mill, Miniature, 5/32" 4 Flute, Double $5.95 Ended, HSS 5414 End Mill, Miniature, 3/16" 4 Flute, Double $5.95 Ended, HSS End Mills, Roughing, Cobalt, Individual Sizes 3 and 4 flute roughing end mills M42 8% cobalt Center cutting, single end Weldon Shank Roughing end mill ground from solid M42 8% cobalt; center cutting and uncoated End Mill, 1/4" 3 Flute Roughing, M42 $12.95 Cobalt 5169 End Mill, 3/8" 4 Flute Roughing, M42 $13.95 Cobalt 5170 End Mill, 1/2" 4 Flute Roughing, M42 $18.95 Cobalt 5171 End Mill, 5/8" 4 Flute Roughing, M42 $24.95 Cobalt 5172 End Mill, 3/4" 4 Flute Roughing, M42 $29.95 Cobalt Cutting Tools: Engraving Tools 3779 Engraving Tool, 90 Degree Angle $18.95 Submicron grade carbide 1/8" shank, 1 1/2" overall length Recommended for use with plastics Use for aluminum, steel, and stainless steel Kyocera Micro Tools PN EGR These engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys, titanium, cast iron, aluminum, copper, brass, and plastics. These cutters cause fewer burs on plastics. Engraving Tools, Half Round, Individual Sizes Submicron grade carbide 1/8" shank, 1 1/2" overall length Use for aluminum, steel, and stainless steel Kyocera Micro Tools These engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys, titanium, cast iron, aluminum, copper, brass, and plastics. These cutters might cause a bur when used on plastics Engraving Tool, Half Round, 0.005" Line $18.95 Width 3777 Engraving Tool, Half Round, 0.010" Line $21.95 Width 3778 Engraving Tool, Half Round, 0.020" Line $21.95 Width Cutting Tools: Indexable End Mills 4804 Indexable End Mill, 2 Flute, 25 mm, $ Center Cut, Tormach 2 Flute Indexable End Mill 25mm cutting diameter M12 threaded mount Precision machined and hardened steel body Threaded Shank Used for general material removal and 3D profiling. Inserts sold separately. Includes insert retaining screws and wrench Arbor, End Mill, Tormach TTS to M12 Long $ Arbor, End Mill, Tormach TTS to M12 Short $ Arbor, End Mill, Tormach TTS to M8 Long $ Arbor, End Mill, Tormach TTS to M8 $27.60 Medium 4816 Arbor, End Mill, Tormach TTS to M8 Short $ Arbor, Slitting Saw, Tormach TTS $ Indexable End Mill, 2 Flute, 17 mm, $ Center Cut, Tormach 4814 Insert, QOGT0830R-G1 Carbide, Tormach $ Insert, QOGT1342R-G1 Carbide, Tormach $ Insert, QOMT0830R-M2 Carbide, Tormach $ Insert, QOMT1342R-M2 Carbide, Tormach $ Indexable End Mill, R8, 1.25" $42.95 R8 shank 1.25" cutting diameter 1.25" length of cut One set of 2 TPG322 end mill carbide inserts included For use in heavy duty milling application. Higher metal removal rates. Great surfacing Indexable End Mill, 2MT, 16 mm $ Indexable End Mill, 3MT, 30 mm $ Screw, Insert Retaining, Indexable End Mill $ Screws, Insert Retaining $5.64 Page 24

25 Cutting Tools: Indexable End Mills Cutting Tools: Indexable Inserts 4121 Indexable Face Mill, 4 Flute, 38 mm, $ Tormach 1.5" (38 mm) 4 Flute Indexable Face/Shell mill for profiling, facing and material removal Face mills are used for surfacing. The increased number of flutes and large cutter diameter allow fast, efficient metal removal in a wide variety of materials. Replaceable carbide inserts can be repositioned as needed to use new cutting edges for economic material removal. Requires a 1/2" shell mill arbor Insert, APGT1135PDFR-G2 Carbide, $9.58 Tormach 4123 Insert, APMT1135PDER-M Carbide, $12.88 Tormach 5040 Indexable Toroidal Cutter, 2 Flute, 16 $ mm, Tormach 2 flute indexable mill with precision machined insert pockets 16 mm (0.63") cutting diameter 23 mm (0.91") height M8 screw stud, hardened tool steel body Inserts sold separately. See 5039 and mm (0.63") 2 flute indexable round insert mill. This unit is ideal for facing and pocketing, where it can be used to make inside corner fillets. Includes insert screws and wrench. **NOTE** Inserts Sold Separately Insert, Toroidal Cutter HF7, Tormach $21.46 Inserts, Application Chart For information about which insert to use with each of our tools, see the insert application chart at Inserts, Carbide Carbide inserts. These inserts fit our indexable tools Insert, CCMT $ Insert, CCMT $ Insert, TCMT $ Insert, TCMT $ Insert, TPC-322 $ Insert, TPG-221 $ Insert, TPGH $ Insert, VCMT-222 $ Insert, 11ERA60 External Thread, TiN Coated 5442 Insert, 11IRA60 Internal Thread, TiN Coated 5582 Insert, APKT-1003 Square Shoulder $ Insert, CCMT Carbide $ Insert, DCMT $ Insert, DCMT $ Insert, GTN-2 $ Insert, GTR Insert, TCMT $ Insert, TCMT $ Insert, TPG-322 $ Insert, TPGH-322 Carbide $ Insert, TPMB-321 Carbide $ Insert, TPMT-222 Carbide $ Insert, VCMT-221 Carbide $9.95 Cutting Tools: Reamers Cutting Tools: Saw Blades Inserts, High Speed Steel High speed steel inserts. These inserts are made from T-15 high speed steel by the A. R. Warner Co. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling Insert, CCMW HSS $ Insert, CCMW HSS 3575 Insert, CCMW HSS 3698 Insert, TCMW-321 HSS 1623 Insert, TPMB-321 HSS 1622 Insert, TPMB-322 HSS 3470 Insert, VCMW-222 HSS $ Insert, 1/16" Groover HSS $ Insert, 1/32" Groover HSS $ Insert, 1/64" Groover HSS $ Insert, 60 Degree Threader $ Insert, CEMW HSS $ Insert, TCMW HSS 1725 Insert, TCMW HSS 3468 Insert, Threading, TNMC-32-NV HSS $ Insert, Threading, TPMC-32-NV HSS $ Insert, TPMW HSS 1723 Insert, TPMW HSS 1624 Insert, TPMW-221 HSS 1621 Insert, TPMW-222 HSS 5110 Insert, VCMW-221 HSS $ Reamers, 14 Piece Over-Under Chucking, $ HSS Includes " over and " under for 1/8" to 1/2" by 16ths Straight shank and straight flute high speed steel reamers Imported Includes plastic pouch This set of high speed steel chucking reamers includes ", ", ", ", ", ", ", ", ", ", ", ", ", " reamers Reamers, 29 Piece Chucking, HSS $ Includes 1/16" - 1/2" by 64ths Straight shank and straight flute high speed steel reamers Includes plastic pouch Band Saw Blades, Duratec FB, Starrett Starrett Duratec PH band saw blade 64 1/2" x 1/2" x 0.025". Made from carbon steel with a flexible back, Duratec FB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is for general purpose contour and straight cutting on a variety of machines Band Saw Blade, 64-1/2", Duratec FB 6/S, $13.95 Starrett 4461 Band Saw Blade, 64-1/2", Duratec FB $ /S, Starrett 4462 Band Saw Blade, 64-1/2", Duratec FB $ /S, Starrett 4463 Band Saw Blade, 64-1/2", Duratec FB $ /W, Starrett Page 25

26 Cutting Tools: Saw Blades Cutting Tools: Slitting Saws Band Saw Blades, Intenss PRO-DIE, Starrett Starrett Intenss PRO-DIE band saw blade 64-1/2" x 1/2" x 0.025". Intenss PRO-DIE band saw blades have bi-metal unique saw technology, triple tempered M-42 cobalt HSS teeth combined with alloy steel backing strip for heat, abrasion and shock resistance, longevity and chip clearing. Ideal for tool, die and mold steels, stainless and nickel based and non-ferrous alloys Band Saw Blade, 64-1/2", Intenss PRO-DIE $ /P-HP, Starrett 1855 Band Saw Blade, 64-1/2", Intenss PRO-DIE $ S, Starrett 1876 Band Saw Blade, 64-1/2", Intenss PRO-DIE $ S, Starrett Band Saw Blades, Porta-Band Bi-Metal, Starrett 44-7/8" (1140 mm) x 1/2" (13 mm) x 0.020" (0.5 mm) Triple tempered M-42 cobalt high speed steel teeth with a fatigue resistant alloy steel backer Patented "Twin Tooth" design of the Split-Chip advantage "bimetal unique" Faster cutting and longer life than ordinary blades Available in a variety of tooth pitches These blades utilize Starrett s exclusive bi-metal unique saw technology for faster cutting and longer blade life. Besides fitting LittleMachineShop.com portable band saws, these blades fit Black & Decker, DeWalt, Greenlee, Makita, Unitec, Porter-Cable, Ridgid, Rockwell, Skil, Milwaukee portable band saws Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /S, Starrett 4933 Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /S, Starrett 4934 Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /W, Starrett 4935 Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /W, Starrett 4937 Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /W, Starrett 4936 Band Saw Blade, 44-7/8", Univerz Bi-Metal $ /S, Starrett Hacksaw Blades, Bi-Metal, Individual Sizes, Starrett Starrett bi-metal uniquehss Safe-Flex hacksaw blades These blades are 12" long, 1/2" wide and are 0.025" thick. Bi-metal unique High Speed Steel Safe-Flex hacksaw blades are made with a patented solid-state diffusion process with 170% more HSS weld area and ground teeth for reduced blade fracture, faster cutting and longer life Hacksaw Blade, Bi-Metal, 18 TPI, Starrett $ Hacksaw Blade, Bi-Metal, 24 TPI, Starrett $ Hacksaw Blade, Bi-Metal, 32 TPI, Starrett $2.01 Slitting Saw Blades, HSS, Individual Sizes 3" saw diameter 1" hole size 30 teeth High speed steel 4725 Slitting Saw Blade, 1/32", HSS $ Slitting Saw Blade, 3/64", HSS $ Slitting Saw Blade, 1/16", HSS $ Slitting Saw Blade, 3/32", HSS $ Slitting Saw Blade, 1/8", HSS Cutting Tools: T-Slot and Dovetail Cutters Dovetail Cutters High speed steel cutters 60 dovetail angle 3/8" shank diameter Cutting Tools: Turning Tools T-Slot Cutters, HSS, Individual Sizes High speed steel cutters Eight teeth Positive radial rake, right and left hand spiral. These T-slot cutters have a positive radial rake, right and left hand spiral with alternate side cutting teeth for maximum chip clearance. The listed dimension is the bolt size T-Slot Cutter, 1/4", HSS $ T-Slot Cutter, 3/8", HSS $ T-Slot Cutter, 5/16", HSS $ Chamfer Tool, 3/8" Indexable, SCSCR-06- $ J, Tormach Designation: SCSCR-06-2J Steel shank 3/8" x 3-1/2" Designed for CCMT and CCGT inserts Approach 45, 7 relief angle Insert Shape: 80 (C) Right hand Chamfer Tool. Includes wrenches and (1) insert Chamfer Tool, 1/2" Indexable, SCSCR-08- $ A, Tormach 5611 Facing Tool, 3/8" Indexable, SCKCR-06-2J, $31.86 Tormach Designation: SCKCR-06-2J Steel shank 3/8" x 3-1/2" Designed for CCMT and CCGT inserts Approach 75, 7 relief angle Insert Shape: 80 (C) Right hand Facing Tool. Includes wrenches and (1) insert Facing Tool, 1/2" Indexable, SCKCR-08- $ A, Tormach 5613 Profiling Tool, 3/8" Indexable, SCMCN-06- $ J, Tormach Designation: SCMCN-06-2J Steel shank 3/8" x 3-1/2" Designed for CCMT and CCGT inserts Approach 50, 7 relief angle Insert Shape: 80 (C) Neutral hand Profile Tool. Includes wrenches and (1) insert Profiling Tool, 1/2" Indexable, SCMCN-08- $ A, Tormach 2431 Profiling Tool, 3/8" Indexable, 35 Deg $90.00 Diamond Inserts, A R Warner 3/8" square, 6" long profiling tool Includes 2 HSS (VCMW-221) inserts Includes 1 carbide (VCMT-221) insert 2 MS-1153 screws 1 T-7 torx wrench This Arthur R. Warner Co. precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.this profiling tool is great for CNC applications, and can be used for most of your turning needs.contents:1 Right Hand bar 3/8 inch shank 6.0 inches overall length, side angle: 3 degree2 Inserts T-15 High Speed Steel VCMW-221 Relief : 7 degree, IC: inch, Thickness: inch, Hole: inch, Top opening: inch, Radius: inch1 Insert Carbide VCMT-221 Relief : 7 degree, IC: inch, Thickness: inch, Hole: inch Top opening: inch, Radius: inchscrews: (2) MS-1153Wrench: T-7The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pregrinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Dovetail Cutter, 60 Degree 3/8" Dia., HSS $ Dovetail Cutter, 60 Degree 1/2" Dia., HSS $ Dovetail Cutter, 60 Degree 3/4" Dia., HSS $ Dovetail Cutter, 60 Degree 1-3/8" Dia., $34.95 HSS Page 26

27 Cutting Tools: Turning Tools 4820 Profiling Tools, 3/8" Indexable R / L, 35 $ Deg Diamond Inserts, A R Warner 3/8" Square shank Right Hand profiling tool, 6" overall length 3/8" Square shank Left Hand profiling tool, 6" overall length Includes 3 HSS (VCMW-221) inserts Includes 1 carbide (VCMT-221) insert 1 extra MS-1153 Torx screw, 1 T-7 wrench This Arthur R. Warner Co. precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.this profiling tool is great for CNC applications, and can be used for most of your turning needs.contents:1 Right Hand bar 3/8 inch shank, 6 inch overall length, Side angle: 3 degrees1 Left Hand bar 3/8 inch shank, 6 inch overall length, Side angle: 3 degrees3 Inserts T-15 High Speed Steel VCMW221, Relief : 7 degrees, IC: inch, Thickness: inch, Hole: inch, Top opening: inch, Radius: inch1 Insert Carbide VCMT221, Relief : 7 degree, IC: inch, Thickness: inch, Hole: inch, Top opening: inch, Radius: inchscrews: (3) MS-1153Wrench: T-7The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pregrinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Tool Bit Sharpening Training Set $39.95 Six presharpened 1/4" high speed steel tool bits Five unsharpened 1/4" tool bits Sharpening instructions Learn how to grind tool bits with this set. The presharpened tool bits show you how the finished product should look. The unsharpened tool bits give you plenty of practice. The presharpened tool bits are ground in the same manner as hand-ground tool bits so they provide an example of how to properly grind tool bits. All the tool bits are M2 high speed steel. M2 is a high speed steel in the tungsten-molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. It is used to manufacture a variety of tools, such as drill bits, taps and reamers Tool Bit, 5/16" Right Hand, Brazed Carbide $1.95 AR-5 brazed carbide turning tool Right hand tool; cuts from right to left These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too Tool Bit, 5/16" Left Hand, Brazed Carbide $ Tool Bits, 1/4" Presharpened, Set of 6 $34.95 Six presharpened 1/4" high speed steel tool bits Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off These tool bits are made from high speed steel.these tool bits are ground in the same manner as hand-ground tool bits so they provide an example of how to properly grind tool bits Tool Bit, 1/4" Left Hand, Presharpened $ Tool Bit, 1/4" Right Hand, Presharpened $ Tool Bit, 1/4" 45 Degree Chamfer, $6.75 Presharpened 1967 Tool Bit, 1/4" Round Nose, Presharpened $ Tool Bit, 1/4" Boring Bar, Presharpened $ Tool Bit, 1/4" Cut-Off, Presharpened $ Tool Bits, 5/16" Brazed Carbide, Set of 5 $ piece cutting tool set Ideal for mini lathes 5/16" (8mm x 8mm) Carbide cutting tips This set includes five different brazed carbide turning tools. The shanks are 5/16" (8mm) which is the right size for the mini lathe. This set includes one each of the following tool bits: DIN 4971R (ISO1) Straight cutter DIN 4975 (ISO10) Tip cutter DIN 4980R (ISO6) Right angle cutter DIN 4980L (ISO6) Left angle cutter DIN 4981R (ISO7) Cutter Tool Bits, M2 High Speed Steel, Individual Sizes 2-1/2" long M2 HSS tool bits M2 is a high speed steel in the tungsten-molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. It is used for a variety of tools, such as drill bits, taps and reamers Tool Bit, 1/8" x 2-1/2", M2 HSS $ Tool Bit, 3/16" x 2-1/2", M2 HSS $ Tool Bit, 5/16" x 2-1/2", M2 HSS $ Tool Bit, 1/4" x 2-1/2", M2 HSS $ Tool Bit, 3/8" x 2-1/2", M2 HSS $2.49 Tool Bits, T-15 High Speed Steel, Individual Sizes 2-1/2" long T-15 HSS tool bits T-15 is a tungsten type super high speed steel containing high vanadium for excellent abrasion resistance and cobalt for good red hardness. AISI T-15 is ideal for cutting difficult to machine materials where high frictional heat is present Tool Bit, 1/8" x 2-1/2" T-15 HSS, A R $6.25 Warner 1716 Tool Bit, 3/16" x 2-1/2", T-15 HSS $ Tool Bit, 1/4" x 2-1/2", T-15 HSS 1715 Tool Bit, 5/16" x 2-1/2", T-15 HSS $ Tool Bit, 3/8" x 3", T-15 HSS $ Turning & Boring Tools, 3/8" Indexable, $ HSS Inserts, A R Warner Right and left hand turning tools with 0.375" shank 3.5" long Boring bar with 0.375" shank 5.0" overall length Includes three T-15 HSS (CCMW21.51) inserts for turning Includes two T-15 HSS (CEMW21.51) inserts for boring Includes two MS-1152S screws, three MS-1153 screws and one T-7 wrench This Arthur R. Warner Co. kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a 3/8" boring bar.the right hand turning bar has a shank, and is 3.50 in overall length.the left hand turning bar has a shank, and is 3.50 in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50 side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.the boring bar has a shank, and is 5.0 in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Turning & Boring Tools, 5/16" Indexable, $76.95 Triangle Inserts 4 turning tools 1 boring tool Inserts and torx wrenches 5/16" shank Uses TCMT Inserts Set comes in a fitted aluminum case 5434 Turning & Cut-Off Tools, 3/8" Indexable $ turning tools 1 cut-off blade Inserts and torx wrenches 3/8" shank Set comes in a fitted aluminum case 5640 Insert, DCMT Carbide $ Insert, MRMN-200-M $ Insert, WCMX050308R-53 Carbide $8.95 Page 27

28 Cutting Tools: Turning Tools 3693 Turning 1/4" & Boring 3/8" Indexable $ Tools, HSS Inserts, A R Warner Right and left hand turning tools with 0.250" shank 3.5" long Boring bar with 0.375" shank 5.0" overall length Includes three T-15 HSS (CCMW21.51) inserts for turning Includes two T-15 HSS (CEMW21.51) inserts for boring Includes two MS-1152S screws, four MS-1153 screws and one T- 7 wrench This Arthur R. Warner Co. kit includes a 1/4" right-hand turning tool, a 1/4" left-hand turning tool, and a 3/8" boring bar.the right hand turning bar has a shank, and is 3.50 in overall length.the left hand turning bar has a shank, and is 3.50 in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50 side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.the boring bar has a shank, and is 5.0 in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Turning and Facing Tool, 3/8" Indexable, $31.86 SCLCR-06-2J, Tormach Designation: SCLCR-06-2J Steel shank 3/8" x 3-1/2" Designed for CCMT and CCGT inserts Approach 95, 7 relief angle Insert Shape: 80 (C) Right hand Turning/Facing Tool. Includes wrenches and (1) insert Turning and Facing Tool, 1/2" Indexable, $39.83 SCLCL-08-3A, Tormach 5615 Turning and Facing Tool, 1/2" Indexable, $39.83 SCLCR-08-3A, Tormach 5614 Turning and Facing Tool, 3/8" Indexable, $31.86 SCBCR-06-2J, Tormach 5610 Turning and Facing Tool, 3/8" Indexable, $31.86 SCLCL-06-2J, Tormach 5620 Turning Tool, 1/2" Indexable, SCBCR-08- $ A, Tormach Designation: SCBCR-08-3A Steel shank 1/2" x 4" Designed for CCMT and CCGT inserts Approach 75, 7 relief angle Insert Shape: 80 (C) Right hand Turning Tool. Includes wrenches and (1) insert Turning Tools, 1/2" Indexable, 80 Deg $ Diamond HSS Inserts, A R Warner Right hand tool holder Left hand tool holder, double ended Includes five T-15 HSS (CCMW32.52) inserts Includes four MS-1155 screws and one T-15 wrench Right hand bar has 0.5" shank and is 4" long.left hand bar has 0.5" shank and is 4" long. It includes a second insert pocket that provides a 50 side cutting edge.uses CCMW32.51 and CCMW32.52 inserts.the second insert pocket on the left hand tool provides a way to use the second and fourth corners on the diamond insert.made by A R Warner.The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Screw, Insert Retaining, MS-1155 $ Turning Tools, 3/8" Indexable, HSS $ Triangle Inserts, 5 Piece, A R Warner 5 piece turning tool set 3/8" square shank 3.5" overall length 6 screws (MS-1153) (5 installed on the bits, 1 extra) T-7 wrench 6 TPMW-222 HSS inserts (5 installed on the bits, 1 extra) This Arthur R. Warner Co. precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. The kit contains the following: 5 Turning bars 3/8 inch shank 3.50 inches overall length 6 Inserts (Turning) T-15 High Speed Steel TPMW-222 Relief : 11 degree, IC:.250 inch, Thickness:.125 inch, Hole:.110 inch Top opening: degrees, Radius:.031 inch Screws: (6) MS-1153 Wrench: T-7 The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products Turning Tools, 1/2" Indexable, HSS $ Triangle Inserts, A R Warner 1719 Turning Tools, 1/4" Indexable, HSS $ Triangle Inserts, A R Warner 1669 Turning Tools, 3/8" Indexable, Triangle $32.95 Inserts 5 piece turning tool set 3/8" square shank Extra screws included Two wrenches TCMT21.51 carbide inserts This set of indexable turning tools includes 5 tools (AR, AL, BR, BL, E), inserts, a wrench, and extra screws. It comes in a wooden case.style AR right hand toolstyle BR right hand tool with a 15 lead anglestyle E Neutral threading tool with 60 included anglestyle BL left hand tool with a 15 lead anglestyle AL left hand toolthe carbide inserts are TCMT Turning Tools, 3/8" Indexable, Triangle $69.95 Inserts, 3 Piece, A R Warner 3 piece turning tool set 3/8" square shank 3 TCMT21.52 inserts 1 TCMT21.51 insert Torx wrench and 4 screws This Arthur R. Warner Co. precision tool holder kits use carbide or high speed steel inserts. These are production quality tool holders that are made in the USA.The kit contains the following:ar and AL tool holders with TCMT21.52 inserts E threading tool holder with TCMT21.51 insert1 extra TCMT21.52 carbide insert 1 extra Torx screw 1 Torx wrenchnote that TCMW21.51 and TCMW21.52 high speed steel inserts also fit these tool holders.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products. Page 28

29 DROs: DRO Packages DROs: DRO Packages 5675 Digital Position Readout, 2-Axis Mini Lathe $ This DRO kit is specifically made for the 7x10, 7x12, and 7x14 mini lathe Mounts right on the cross slide and compound rest to give you accurate depth-of-cut readings Resolution: ", accuracy: 0.001" Buttons for on/off, zero, and inch/mm This works with most 7x10, 7x12, or 7x14 lathes made by SIEG, which includes almost all the mini lathes sold in the US and most of the mini lathes sold world-wide. This kit does not work on 20 TPI mini lathes as sold by Micro Mark Digital Position Readout, 2-Axis Mini Lathe $ TPI 5515 Digital Position Readout, 3-Axis Bluetooth $ Universal Fits milling machines with less than 32" total X-, Y-, and Z-axis travel Displays on any Android tablet with Bluetooth capability Resolution of " (0.005 mm) VAC Power supply Coolant and dust resistant This magnetic technology digital readout package fits virtually any milling machine with less than 31.8" total X-, Y-, and Z-axis travel. This kit includes 1 meter (39.4") of magnetic scale that you cut to the lengths required for your machine. The instructions tell you how to measure and cut the magnetic scale. This package includes what you need to put a DRO on most any milling (or 3-in-one) machine. It includes a section of scale, three read heads, and a Bluetooth transceiver. You must also get an Android tablet for the display on this DRO. We recommend a 7" screen size, and the tablet must have Bluetooth capability Android Tablet, Bluetooth DRO Readout $ Digital Position Readout, 2-Axis Bluetooth $ for Mini Lathe 5493 Digital Position Readout, 3-Axis Bluetooth $ for HiTorque 3900 Mini Mill 5497 Digital Position Readout, 3-Axis Bluetooth $ for HiTorque Bench Lathe 5494 Digital Position Readout, 3-Axis Bluetooth $ for HiTorque Bench Mill 5514 Digital Position Readout, 3-Axis Bluetooth $ for HiTorque Mini Mill 5492 Digital Position Readout, 3-Axis Bluetooth $ for Mini Mill 5499 Read Head, Bluetooth DRO Magnetic $ Scale, Bluetooth DRO Magnetic 1 Meter $ Transceiver, Bluetooth DRO $ Digital Position Readout, 3-Axis DRO Pros $ Mill Easiest to use DRO on the market. More buttons, most intuitive layout--just walk up and operate 5 micron (0.0002") resolution. 1 micron ( ") resolution with inexpensive scale upgrade Clearly-written full-color manual and video training DVD, 3- year warranty SlimLine 20 mm x 28.5 mm (0.79" x 1.12") scales; you choose the length, up to 1000 mm (39.3") INCLUDE SCALE SIZES IN SPECIAL INSTRUCTIONS ON YOUR ORDER The DRO PROS 3M three-axis mill package includes everything you need: the display head; 3 glass scales up to 1000 mm (39.3") travel; detailed installation instructions; a detailed full-color operator s manual; 3-year warranty; display mounting arm; power cord; mounting hardware; and universal mounting brackets. The package includes your choice of 19 different size scales ranging in travel from 100 mm (3.9") up to 1000 mm (39.3") in 50 mm increments. Optionally, you can choose 1 micron ( ") resolution scales for an additional $50.00 per scale. Operates on 120V or 240V AC Digital Position Readout, 2-Axis DRO Pros $ Lathe 3976 Digital Position Readout, 2-Axis DRO Pros $ Mill 3997 DRO Pros Scale Upgrade to 1 Micron $50.00 Resolution 4239 Digital Position Readout, 3-Axis Magnetic $1, Scale, DRO Pros Mill Magnetic scales can be cut to exact length you need Easy to use. More buttons, most intuitive layout--just walk up and operate 5 micron (0.0002") resolution Clearly-written full-color manual and 6-year warranty The DRO PROS EL400 three-axis mill package includes everything you need: the display head, 3 magnetic scales 12" x 30" x16" maximum travel, detailed installation instructions, a detailed full-color operator s manual, 6-year warranty, mounting arm, mounting hardware, and universal mounting brackets. Additionally, the display has a USB port on the back, ensuring it won't become obsolete when a new software update is released. Magnetic scales are impervious to liquid yet they are slimmer than glass scales. They re easier to mount and more durable than other scales. Simply cut the scales to the length you need and mount them. See the instructions on the Chris Tips tab. This package includes these features: half function, inch/metric conversion, absolute/incremental modes, axis home reference, machine reference, sub datums, bolt-hole circle (pcd), arc bolt hole, arc contouring, grid hole function, line hole function, calculator (trigonometric), encoder fail detection, memory backup. Operates on 120V or 240V AC 4241 Digital Position Readout, 2-Axis Magnetic $ Scale, DRO Pros Lathe 4240 Digital Position Readout, 2-Axis Magnetic $ Scale, DRO Pros Mill Page 29

30 DROs: DRO Packages 2665 Digital Position Readout, 3-Axis Shooting $ Star Shooting Star BT-3 3-axis digital position readout Includes the digital display unit, 3 scales, and mounting hardware Resolution: ", accuracy: 0.001" The keypad is a splash-proof membrane with tactile keys in a sturdy metal enclosure Guaranteed to fit any mill, lathe, or 3-in-1 machine Shooting Star BT-3 3-axis digital position readout functions include: Inch/mm display, reversible count direction (change the direction in which the count goes up), automatic centering (find the center of a workpiece or hole by touching off two sides), two sets of coordinates (good for placing hole patterns, making slots and such), enter coordinates (you can enter the values for the current location), bolt circle and bolt line calculators (quickly create a pattern of holes), tool offsets (remember the setting for various lathe tools), and preset positions (quickly return to positions you have saved).this DRO uses a precision rack and anti-backlash pinion, with an optical encoder on the pinion.power: 120VAC.This DRO includes one 48" scale and two 16" scales. The scales are easily shortened to suit your machine. It will fit on the mini mill with a power feed installed.*note* These items ship directly from the supplier in Canada. Shooting Start takes two or three weeks to process and ship orders, so there will be a delay before you receive this order Digital Position Readout, 2-Axis Shooting $ Star 3568 Digital Position Readout, 3-Axis Shooting $ Star for X3 Mill 5012 DRO Scale, 12" (300 mm) with Display $ " travel stainless steel scale Stackable display unit Mounting arm Displays in inches or mm Resolution: 0.01mm/0.0005" Accuracy: 0.04mm/0.002" These units are significantly more robust than other inexpensive scales that are available. There are no batteries in the scale units, and the scale units are permanently wired. No square rubber plugs to cause issues. The plug into the display unit is a micro USB plug (though not wired as USB), so it's pretty robust. And each display has a strain relief to prevent stress on the plug. Kits: Lathe Conversion Kits 5000 Bed Extension Kit 16" $ Precision ways are approximately 28-3/8" long Rack is approximately 17-3/4" long Lead screw is approximately 29-5/16" long This kit turns your 7x10 or 7x12 lathe into a 7x16 lathe. It includes a bed casting, a lead screw, a rack, a motor mount, a chip pan, 2 chip pan braces, several fasteners, and complete instructions. The 7x16 bed is actually 8" longer than the 7x10 bed. It is 4" longer than the 7x12 bed. This is NOT a bolt-together kit. You must drill and tap 9 holes in the new bed casting to match your lathe. You need three metric taps: M3x0.5, M6x1, and M8x1.25. If you don't have metric drills, you can use letter and number drills for tap drills. (The sizes are given in the instructions.) 4270 Bed Extension Kit 16", HiTorque Mini $ Lathes ONLY FITS LittleMachineShop.com HiTorque 7x12 Mini Lathes Extend your HiTorque Mini Lathe to 16" between centers Precision ground ways are approximately 27-7/8" long Rack is approximately 18" long Lead screw is approximately 29" long This kit turns your Littlemachineshop.com 7x12 HiTorque Mini Lathe into a 7x16 lathe. It includes a bed casting, a lead screw, a rack, a chip pan, and complete instructions. This is NOT a bolt-together kit. You must drill and tap 10 holes in the new bed casting to match your lathe. You need three metric taps: M3x0.5, M6x1.0, and M8x1.25. If you don't have metric drills, you can use letter and number drills for tap drills. (The sizes are given in the instructions.) 4450 Extended Cross Slide Travel Kit $72.95 This kit adds one inch to the travel of the cross slide on 7x10 and 7x12 mini lathes. These are SIEG C2 and C3 lathes. The increased travel is away from the centerline of the lathe so you can work on larger diameter work pieces. This kit replaces the saddle and the cross slide feed screw, and it includes a spacer for the longer screw Extended Cross Slide Travel Kit 20 TPI $ Extended Cross Slide Travel Kit DRO $72.95 (Black Scales) 5367 Extended Cross Slide Travel Kit DRO (Gray $72.95 Scales) 2383 Feed Screw Parts, 20 TPI, Mini Lathe $59.95 DROs: Scales Each display unit contains two CR2032 lithium batteries for long life DRO Scale, 24" (600 mm) With Display $ DRO Scale, 6" (150 mm) With Display $ DRO Scale, 12" (300 mm) $85.00 Digital scale unit has a range of 0-12" (0-300mm) Includes two mounting brackets Resolution is " (0.01mm) and the accuracy is 0.001" (0.03 mm) Data output jack works with many digital display units One SR V battery is included The scale cross section is 16 mm x 4 mm. The scale is 420 mm long. With the mounting brackets installed, it is 445 mm long overall.this scale is the correct length for the X- and Z-axis on the mini mill as well as the carriage motion on 7x10 and 7x12 mini lathes DRO Scale, 20" (500 mm) $ These parts change Grizzly, Harbor Freight, Homier, and Cummins mini lathes to 20 thread per inch feed screws on the cross slide and compound rest. Each rotation of the hand wheel will advance 0.050" Feed Screw Parts, Metric, Bench Lathe $69.95 Fits HiTorque Bench Lathe Fits SIEG C4 and SC4 lathes These parts change the cross slide and compound feed screws, and the carriage dial to metric Metal Gear Kit, Mini Lathe Complete $ Changes every plastic gear on the mini lathe to metal Metal change gear set Metal 2-speed transmission gears Metal lead screw drive gears Metal 80-tooth gears This kit changes every plastic gear on a mini lathe to steel. You will never break a plastic gear again.*note* Although our HiTorque lathe is listed in the compatibility tab, only the change gears are compatible Gear, 45 Teeth, Metal $ Gear, 80 Teeth, Metal $ Pinion, 20 Teeth, Metal $ Pinion, 25 Teeth, Metal $ Change Gear Set, Metal $89.95 Page 30

31 Kits: Lathe Conversion Kits 3448 Metal Transmission Gear Kit, Mini Lathe & $ MT Mini Mill Replaces both plastic transmission gears with metal Fits mini lathes and 3MT mini mills Once this kit of steel gears is installed on your mini lathe or mini mill, you will no longer have to worry about breaking the hardto-replace gears inside the headstock.on the mini lathe, the belt drive ensures that expensive parts don't break from overloads.on the mini mill, the easy-to-replace intermediate gear on top of the headstock is still plastic. This helps to ensure that you don't break expensive and hard to replace parts Gear, 2-Speed Intermediate Shaft, Metal $ Gear, 2-Speed Spindle, Metal $ Gear, Intermediate, Metal $ Gear, Spindle 2, Metal $ Gear, Saddle Drive, 65 Teeth $ Transmission Gear Kit, R8 Mini Mill, Metal $ Metric Threading Kit 12" $48.95 Metric threading kit for 7x12 mini lathes. This kit replaces the lead screw and half nuts so you can more easily cut metric threads. You cannot use a threading dial with this kit installed. There is no metric threading dial Metric Threading Kit 10" $ Metric Threading Kit 14" $ Metric Threading Kit 16" $ Power Switch Upgrade Kit $4.95 Heavy duty Cherry brand switch Five times the rated life of the standard switch Switch rated at 16 A at 120/250 VAC No soldering required to install This is an upgrade kit for the illuminated power switch on Harbor Freight mini lathes. The kit contains an upgraded switch, two crimp terminals, and a multi-stack quick disconnect. You have to un-solder the old switch, but the crimp terminals eliminate soldering during installation Tailstock Cam Lock Kit $29.95 This kit converts a standard mini lathe tailstock to lock by lever action. This camlock action locks the tailstock to the ways by moving a lever about 45 degrees. You must drill one 1/2" hole in the back of the tailstock casting. The cam lock kit is made from heat treated 4140 steel for long life Tweaks & Enhancements Kit, Mini Lathe $21.95 Several small items to make your lathe work better and last longer Easier gib and saddle retainer adjustment Fewer busted knuckles Quicker gear cover removal Fewer tailstock clamp jams The Mini Lathe Tweaks & Enhancements Kit can make a big difference in the operation of your mini lathe. The kit includes the following: -Hardened lathe chuck mounting nuts for long life. -Self locking set screws for the cross slide and compound rest gibs -Self locking cap screws for the carriage retainers -Button-head cap screws for the cross slide and compound rest crank handles. -Thumbscrews for the change gear cover. -A spring for the tailstock clamp. -A rubber boot to protect the F/O/R switch on 7x10 and 7x12 mini lathes. -A rubber guard to prevent chips from getting into the motor speed control enclosure. -Complete instructions 3940 Tweaks & Enhancements Kit, HiTorque $19.95 Mini Lathe Kits: Lathe Starter Kits 1261 Starter Kit, Mini Lathe, 5/16" Tool Bits $ /2" Capacity Drill Chuck and key Drill chuck arbor 2MT short to 33JT Five 5/16" M2 high speed steel tool bit blanks Four center drills, sizes 1, 2, 3, and 4 Mini Lathe starter kit designed for 7x10, 7x12 and 7x14 mini lathes and includes all the basics you need to get started with a new mini lathe. Drill Chuck: 0-1/2" Capacity drill chuck. All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount. Runout of this chuck is 0.008" (0.20 mm) or less. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). Tool Bits: 5/16" square by 2-1/2" long HSS tool bits made of M2 high speed steel. The tool post on most mini lathes are sized to use 5/16" tool bits. Center Drills: Four sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, and 4 with 60 degree counter sinks Starter Kit, Lathe, 3/8" Tool Bits $ Tooling Package, 3595 HiTorque Bench $ Lathe Premium 1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor 1/2" indexable boring bar - CCMT inserts 3/8" indexable TCMT carbine inserts Premium P1 cut-off blade, 5 center drills This tooling package contains premium quality tooling for a C4, SC4 or LittleMachineShop.com HiTorque 8.5x16 bench lathes. The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable turning tools are made by Arthur R. Warner Co. in the USA. These precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT carbide insert, one extra Torx screw, and one wrench. 1/2" diameter indexable boring bar uses CCMT inserts and is 7" long. The minimum bore diameter for this is 0.625". The boring bar takes CCMT or CCMT inserts. The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. T-shape parting blades provide great side clearance. Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. This tooling package does not include a quick change tool post because the 3595 Bench Lathe is equipped with a QCTP. Page 31

32 Kits: Lathe Starter Kits 5124 Tooling Package, 5200 Mini Lathe $ /8" indexable TCMT inserts 9-piece carbide boring bar set - 3/8" shank 1/2" drill chuck, 2MT short to 33JT drill chuck arbor 4 center drills (sizes 1-4) P1N cut-off blade This package contains all the tooling you need to be productive with your HiTorque model 5200 mini lathe on the first day you own it.the package does not include a quick change tool post because there is one on the model 5200 lathe.the 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51.The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to to " from the nominal diameter.the P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists Tooling Package, 5200 Mini Lathe $ Premium 1/2" professional grade drill chuck 2MT standard to 33JT drill chuck arbor 3/8"- 6" long indexable boring bar CCMT inserts 3/8" indexable TCMT carbine inserts Premium P1 cut-off blade, 5 center drills This package contains our best versions of all the tooling you need to be productive with your 7x10, 7x12, 7x14, or 7x16 mini lathe. The package does not include a quick change tool post because there is one on the model 5200 lathe. Drill Chuck: The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable Inserts: Indexable turning tools are made by AR Warner Co in the USA. These Warner precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT carbide insert, one extra Torx screw, and one wrench. Boring Bar: This 3/8" diameter indexable boring bar uses CCMT inserts and is 6" long. The minimum bore diameter for this is 0.50". The boring bar takes CCMT or CCMT inserts. Cut-Off Blade: The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. in the USA. These T-shape parting blades provide great side clearance. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, Grizzly G0765 $ Specific items for 7x14 from Grizzly, Real Bull, and Big Dog 3/8" indexable TCMT inserts, P1N cut-off blade 9-piece carbide boring bar set - 3/8" shank 1/2" drill chuck, 2MT standard to 33JT drill chuck arbor 4 center drills (sizes 1-4) This package contains all the tooling you need to be productive with your 7x14 mini lathe on the first day you own it.the Tormach 0XA quick change tool post set (QCTP).This set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal)the wedge type quick change tool post is made of steel and all working parts are hardened and ground. No tools are required to change tools. Additional tool holders are available.the turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with 3/8" or 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.the 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51.The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to to " from the nominal diameter.the P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists Tooling Package, HiTorque Bench Lathe $ Premium Tormach 0XA QCTP set with post mount for SC4 lathes 1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor 1/2" indexable boring bar - CCMT inserts 3/8" indexable TCMT carbine inserts Premium P1 cut-off blade, 5 center drills This tooling package contains premium quality tooling for a C4, SC4 or LittleMachineShop.com HiTorque 8.5x16 bench lathes.includes a Tormach 0XA (Series 000) quick change tool post set (QCTP).This set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal)qctp features all steel construction and wedge type tool post for better clamping and repeatability. All working parts are hardened, ground and sealed. Designed for lathes with limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M12/M10 stud for C4 and SC4 lathes, which is included. The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less.indexable turning tools are made by Arthur R. Warner Co. in the USA. These precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT carbide insert, one extra Torx screw, and one wrench.1/2" diameter indexable boring bar uses CCMT inserts and is 7" long. The minimum bore diameter for this is 0.625". The boring bar takes CCMT or CCMT inserts.the premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. T- shape parting blades provide great side clearance.five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. Page 32

33 Kits: Lathe Starter Kits 4116 Tooling Package, Mini Lathe Premium $ Tormach 0XA (Series 000) QCTP set 1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor 3/8"- 6" long Indexable boring bar - CCMT inserts 3/8" indexable TCMT carbine inserts Premium P1 cut-off blade, 5 center drills This package contains our best versions of all the tooling you need to be productive with your 7x10, 7x12, 7x14, or 7x16 mini lathe.qctp: The 0XA (Series 000) quick change tool post features all steel construction and wedge type tool post for better clamping and repeatability. All working parts are hardened and ground. Sealed for maintenance-free operation.tool holders designed for mini lathes and other lathes with limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M10 stud, which is included.this set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal)drill Chuck: The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less.indexable Inserts: Indexable turning tools are made by Arthur R. Warner Co. in the USA. These Warner precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT carbide insert, one extra Torx screw, and one wrench.boring Bar: This 3/8" diameter indexable boring bar uses CCMT inserts and is 6" long. The minimum bore diameter for this is 0.50". The boring bar takes CCMT or CCMT inserts.cut-off Blade: The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. in the USA. These T-shape parting blades provide great side clearance.center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, Mini Lathe, Tormach $ XA QCTP QCTP Set easily mounts to 7x10, 7x12, 7x14, 7x16 lathes 3/8" indexable TCMT inserts, P1N cut-off blade 9-piece carbide boring bar set - 3/8" shank 1/2" drill chuck, 2MT short to 33JT drill chuck arbor 4 center drills (sizes 1-4) This package contains all the tooling you need to be productive with your 7x10, 7x12, 7x14 or 7x16 mini lathe on the first day you own it.the Tormach 0XA quick change tool post set (QCTP). This set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal)the wedge type quick change tool post is made of steel and all working parts are hardened and ground. No tools are required to change tools. Additional tool holders are available.the turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with 3/8" or 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.the 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). Kits: Mill Conversion Kits 3527 Tooling Package, Small Lathe $ AXA (Series 100) Quick Change Tool Post Set 1/2" Indexable TCMM Inserts, P1X Cut-Off Blade 1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor 9-piece carbide Boring Bar Set - 3/8" shank 5 Center Drills (sizes 1-5) This package contains all the tooling you need to be productive with your lathe on the first day you own it. The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, mounting hardware, a turning & facing tool holder, a boring, turning & facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, and a knurling, facing & turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It requires some level of work, tapping a hole, or making a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 1/2" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMM-321. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to to " from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists Tooling Package, 9x20 Lathe $ Air Spring Conversion Kit $39.95 Converts torsion spring mini mills to air spring Allows travel to the top of the column Provides better support for the mill head Convert torsion spring mini mills to air spring. Most mini mills use a torsion spring mounted on the side of the column to support the head. This kit provides all the parts required to change to a vertical air spring that mounts inside and above the column. With the air spring installed, you can move the mill head up until the top of the casting is almost flush with the top of the column. You can move it down until it almost contacts the adjustable Z-axis stop set in its lowest position. Besides all the parts required to mount the air spring, this kit also includes a longer Z-axis rack so you can take advantage of the longer head motion. This air spring has about 35 pounds of force. This is not enough to totally support the head, but it is a heck of a lot more support than the torsion arm provides Air Spring Conversion Kit, HiTorque Mini $49.95 Mills The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51.The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to to " from the nominal diameter.the P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists. Page 33

34 Kits: Mill Conversion Kits 2560 Belt Drive Conversion Kit, Mini Mill $ No more broken drive gears Much quieter operation Spindle speed up to 4300 RPM Ideal for manual and CNC mini mills This mini mill belt drive conversion kit provides an easy-toinstall alternative to the noisy and fragile factory-installed gears that drive the spindle on the mini mill. This kit is CNC-machined from the highest quality materials. Designed to run full-time, it is built to last. The CNC belt drive conversion kit includes one belt. Change speeds without any tools. Simply remove the guard, loosen the lever locks and move the belt from one pair of pulleys to the other. Low speed range is RPM. High speed range is RPM. The installation is bolt-on and takes about 20 minutes. This CNC belt drive kit fits the following mills: Grizzly G0516 Lathe Mill Combo Cummins 7877 Mini Mill Grizzly G8689 Mini Milling Machine Harbor Freight Central Machinery Mini Mill/Drill Hare & Forbes HM-10 Mini Mill Drill Homier Speedway Mini Mill Micro-Mark MicroLux Milling Machine The small pulley has a 9 mm bore with a 3 mm keyway. The large pulley has a 30 mm bore with a 5 mm keyway. If your shafts don't match these values, then this belt drive will not fit your mill Belt Drive Shield, Mini Mill, Plastic $ V-Belt for Mini Mill Belt Drive $ CNC Spindle Control Upgrade Kit for SX2, $99.95 SC2 Converts brushless DC drive to CNC control Provides speed, on/off, and direction control For 500 watt Brushless DC drive used on SX2, SC2 120V 60Hz This conversion kit consists of a small circuit board that replaces the circuit board with the speed control potentiometer, plus a replacement chip for the motor controller card. This kit works on SX2 mini mill and SC2 mini lathes CNC Spindle Control Upgrade Kit for SX2, $99.95 SC2 230V 4645 CNC Spindle Control Upgrade Kit for $99.95 SX2.7, SX3, SC CNC Spindle Control Upgrade Kit for $99.95 SX2.7, SX3, SC4 230V 1764 Feed Screw Parts, 20 TPI, Mini Mill $ Long Table Kit, Micro Mill $89.95 Table is 400 mm x 145 mm X-Axis travel is 330 mm Provides 150 mm more X-axis travel This kit adds a larger table, and increases the X-axis travel to 330 mm on the Harbor Freight micro mill. The conversion kit includes a new table and 20 TPI X-axis screw Long Table Kit, Micro Mill, Metric $ Long Table Kit, Super X3L $ Extra long table for X3 SX3 mills This extra long mill table fits both SIEG X3 and SIEG Super X3 mills and comes complete with an extra long feed screw and rule which may be fitted to the front of the table with the rivets supplied. The table is 700 mm x160 mm Spindle Conversion Kit, R8 $74.95 This kit converts a Grizzly or Micro-Mark mini mill to an R8 spindle The kit includes: -R8 spindle -Two spindle gears -Two spacing rings -Two keys -One bearing -One drawbar -Complete instructions 2823 Spindle Conversion Kit, 3MT $ Tweaks & Enhancements Kit, Mini Mill $34.95 Several small items to make your mini mill work better and last longer Easier gib adjustment Fewer stripped locking levers Easier backlash adjustment Cleaner T-slots The Mini Mill Tweaks & Enhancements Kit can make a big difference in the operation of your mini mill. The kit includes the following: Improved (German-made) locking levers for the X-, Y-, and Z- axes. Self locking set screws for the X-, Y-, and Z- axis gibs. Self locking adjustment nuts for the X-, and Y-axes. A T-slot cleaner Complete instructions These parts change Grizzly, Homier, Cummins, and Harbor Freight mini mills to 20 thread per inch feed screws on the X- and Y-axis. Each rotation of the hand wheel will advance the table 0.050". The mini mill tool kit includes two feed screws, two nuts, two 50 division dials, plus the springs and keys that you are going to lose during disassembly. This mini mill conversion kit includes the extended screw for the mini mill power feed Metric Kit, Mini Mill $ Large Table Solid Column Conversion Kit, $ Mini Mill Converts a tilting column mini mill to the large table solid column version 30% more travel in both directions 50% more table area Solid column is significantly more rigid This kit converts a tilting column mini mill to a large table with a solid column.the kit includes the X-Y table and column from the HiTorque Solid Column Mini Mill (part number 3990), the fasteners needed to connect them.this kit contains a complete X-Y table assembly for a mini mill.the table is 120 mm (4.73") by 460 mm (18.11"). It has three 12 mm T- slots.the X-axis travel is 300 mm (11.8") and the Y-axis travel is 130 mm (5.1"). The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050".The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes. Page 34

35 Kits: Mill Conversion Kits Kits: Mill Starter Kits 5069 Upgrade Kit, Mini Mill $ Includes 2258 Air Spring Kit and 2560 Mini Mill Belt Drive Kit Much quieter operation Spindle speed up to 4300 RPM Allows travel to the top of the column while providing better support for the mill head No more broken drive gears Do not buy this kit if you have a HiTorque Mini Mill. Most or all of these features are already included on the HiTorque mills. This kit provides an easy-to-install alternative to the noisy and fragile factory-installed gears that drive the spindle on the mini mill. The kit includes one belt. Change speeds without any tools. Simply remove the guard, loosen the lever locks and move the belt from one pair of pulleys to the other. Low speed range is RPM. High speed range is RPM. This belt drive fits the following mills: Grizzly G0516 Lathe Mill Combo Cummins 7877 Mini Mil Grizzly G8689 Mini Milling Machine Harbor Freight Central Machinery Mini Mill/Drill Hare & Forbes HM-10 Mini Mill Drill Homier Speedway Mini Mill Micro-Mark MicroLux Milling Machine The small pulley has a 9 mm bore with a 3 mm keyway. The large pulley has a 30 mm bore with a 5 mm keyway. If your shafts don't match these values, then this belt drive will not fit your mill. Convert torsion spring mini mills to air spring. This kit provides all the parts required to change to a vertical air spring that mounts inside and above the column. With the air spring installed, you can move the mill head up until the top of the casting is almost flush with the top of the column. You can move it down until it almost contacts the adjustable Z-axis stop set in its lowest position. This air spring has about 35 pounds of force. This is not enough to totally support the head, but it is a heck of a lot more support than the torsion arm provides Starter Kit, Micro Mill $84.95 This kit contains the basics you need to start using your new micro mill 36-piece clamping kit for 5/16" (8 mm) T-slots Thin parallels (3" long) blocks Edge and center finder This kit contains the basics you need to start using your new micro mill.the clamping kit fits the 8 mm T-slots on the micro mill. The clamping kit includes10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps.the thin parallels are a set of 10 matched pairs of high grade steel parallels, precision ground and hardened. The parallels are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8".They are made of high grade alloy steel hardened to 52 to 58 Rc and are parallel within " on the top and bottom. The pairs are matched in height within ".The precision blocks are ground and case hardened on all sides to Rc. The blocks are 1" by 2" by 3". They are parallel within ", flat within " and square within ". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC.The 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over Starter Kit, Mini Mill $90.95 Clamping kit for 7/16" (12 mm) T-slots Thin parallels (6" long) blocks Edge and center finder T-slot cleaner This kit contains the basics you need to start using your new mini mill. 7/16" T-Slot Clamping Kit: 58-piece clamping kit 3/8"-16, 7/16 T-Slot This clamping kit fits the 12 mm T-slots on the mini mill. The clamping kit includes 24 3/8-16 studs, 12 step blocks in pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold downs. Clamping kit comes in a wall mount rack. Thin Parallels: Combo set of 10 matched pairs of high grade steel parallels, precision ground and hardened. Parallels are 1/8" thick and 6" long. Heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" Made of high grade alloy steel hardened to 52 to 58 Rc. Parallel within " on the top and bottom. The pairs are matched in height within ". Set comes in a durable plastic fitted case Blocks: These precision blocks are ground and case hardened on all sides to Rc. The blocks are 1" by 2" by 3". They are parallel within ", flat within " and square within ". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC. Edge and Center Finder: This 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over. T-Slot Cleaner: Use this T-slot cleaner to clear the swarf from the T-slots on your mini mill and bench mill. Made for LittleMachineShop.com specifically to fit the Mini Mill and Bench Mill Tooling Package, 2MT Micro Mill $ " toolmakers screwless vise and 10 pairs of 3" long thin parallels Precision Blocks and 36-piece Clamping Kit 8 mm T-slot Two 6-piece end mill sets, 2 & 4 flute and 5 center drills Seven piece 2MT collet set Combination edge and center finder Tooling package with all the essentials for a 2MT micro mill. Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc All sides are flat, square and parallel to ". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within "). Clamping Kit: 36-piece kit fits 8 mm T-slots on a micro mill. Includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps. End Mills: 6-piece 4 flute & 6-piece 2 flute, HSS, center cutting end mill sets. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". All with 3/8" shanks. 2MT Collets: Set of seven high-grade tool hardened steel round collets, sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills Blocks: Ground and hardened on all sides to Rc, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. Page 35

36 Kits: Mill Starter Kits 3869 Tooling Package, 3501 CNC Mill $ Toolmakers Screwless Vise and 10 Pairs of 3 long thin parallels Precision Blocks and 36-piece Clamping Kit 8mm T-Slot Two 6-piece end mill sets, 2 & 4 flute and 5 Center Drills Four 2MT End Mill Holders Combination Edge and Center Finder Tooling package with all the essentials for a 3501 CNC Mill. Toolmakers Vise: 3 toolmakers screwless vice has a one-piece body. The body and jaws are hardened to RC All sides are flat, square and parallel to ". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. Thin Parallels: Set of ten pairs, 1/8 thick x 3 long, in fitted case. Made of high-grade alloy steel hardened to RC, parallel within on top and bottom. Parallel heights: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, and 1-5/8 (pairs matched within ). Clamping Kit: 36-piece kit fits 8mm T-slots on a micro mill. Includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps. End Mills: 6-piece 4 flute & 6-piece 2 flute, HSS, center cutting end mill sets. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". All with 3/8" shanks. End Mill Holders: Set of four 2 Morse taper, high-grade tool hardened steel end mill holders. Sizes 3/16", 3/8", 1/2", and 5/8". The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills Blocks: Ground and hardened on all sides to RC, sizes 1 x 2 x 3. Parallel within , flat within , and square within Set has two matched blocks, 23 holes of which 5 are threaded 3/8-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. This tooling package is perfect for KX1 CNC Mills Tooling Package, ER-16 Micro Mill $ " toolmakers screwless vise and 10 pairs of 3" long thin parallels Precision blocks and 36-piece clamping kit - 8 mm T-slot Two 6-piece end mill sets, 2 & 4 flute and 5 center drills Five piece ER-16 collet set Combination edge and center finder Tooling package with all the essentials for an ER-16 Micro Mill. Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc All sides are flat, square and parallel to ". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within "). Clamping Kit: 36-piece kit fits 8 mm T-slots on a micro mill. Includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps. End Mills: 6-piece 4 flute & 6-piece 2 flute, HSS, center cutting end mill sets. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". All with 3/8" shanks. ER-16 Collets: Set of five ER-16 round collets. Sizes: 1/8", 3/16", 1/4", 5/16", and 3/8". Made of high-grade tool hardened steel, ground to close tolerance, this set includes the sizes required for most common end mills Blocks: Ground and hardened on all sides to RC, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, Grizzly G0758 Mill $ " precision milling vise (heavy) and 10 pairs of 3" long thin parallels Precision blocks and 20 piece end mill set - 2 & 4 flute (10 each) 58- piece clamping kit - 5/16"-18, 3/8" T-slots Seven piece R8 collet set, five center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Tooling package with all the essentials for an R8 mini mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within " in 4" without the swivel.thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within ").End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" 3/4" by 16ths.R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" Blocks: Ground and hardened on all sides to Rc, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC.Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, R8 Bench Mill Premium $ " Precision milling, professional and 10 pairs of 4" long thin parallels Thirteen piece R8 collets, Two six-piece M42 8% cobalt end mill set - 2 & 4 flute 58 - piece clamping kit - 3/8"-16, 7/16" T-slots Premium precision blocks, five center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Premium tooling package with all the best products for your R8 mini mill. Milling Vise: 4" Kurt-style professional milling vice with detachable 360 swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 11.6" and the height is 3.1" without base, and 4.3" with base. Jaws are 3.15" wide, 0.9" deep, open 3", and are perpendicular to the ways within " in 4". The ways are parallel to the base within " in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 4" long. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16" (pairs matched within "). End Mills: Two six-piece M42 8% cobalt, center cutting End Mills sets, 2 & 4 flute. Sizes: 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2". The smaller end mills have 3/8" shanks and the 1/2" end mill has a 1/2" shank. R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high grade tool steel, hardened and ground to a TIR of " or less. This set includes all the sizes required for common end mills Blocks: Premium precision blocks, ground and case hardened on all sides to Rc. Blocks are 1" x 2" x 3"; parallel, flat, and square within ". Set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC. Five piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. Page 36

37 Kits: Mill Starter Kits 4212 Tooling Package, R8 CNC Mini Mill $ " precision milling vise (Heavy) and 10 pairs of 3" long thin parallels Five piece R8 end mill holders, 20 piece end mill set - 2 & 4 flute (10 each) 58-piece clamping kit - 3/8"-16, 7/16" T-slots Precision blocks, five center drills - 60 countersinks Combination Edge and Center Finder and a T-Slot Cleaner Tooling package with all the essentials for an R8 CNC Mini Mill.Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within " in 4" without the swivel Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within ").End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" 3/4" by 16ths.The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill. This set includes all the sizes required for common end mills Blocks: Ground and hardened on all sides to Rc, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC.Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, R8 Mini Mill $ " precision milling vise (heavy) and 10 pairs of 3" long thin parallels Precision blocks and 20 piece end mill set - 2 & 4 flute (10 each) 58- piece clamping kit - 3/8"-16, 7/16" T-slots Seven piece R8 collet set, five center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Tooling package with all the essentials for an R8 mini mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within " in 4" without the swivel.thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within ").End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" 3/4" by 16ths.R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" Blocks: Ground and hardened on all sides to Rc, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC.Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Tooling Package, 3MT Mini Mill $ Tooling Package, R8 Bench Mill $ Tooling Package, R8 Mini Mill Essentials $ " precision milling vise, 4 pairs of 3 parallels 58 - piece clamping kit - 3/8"-16, 7/16" T-slots Ten piece end mill set - 2 & 4 flute Five piece R8 collet set, four center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Tooling package with the basic tooling for an R8 mini mill.milling Vise: The precision 3" Kurt-style milling machine vise has a detachable swivel base that features easy to read divisions.the top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The hardened and ground replaceable jaws on this vise are 3.15" wide, 0.93" deep, and open 2.83". The vise is 10.24" long. Without the base, the vise is 2.91" high. With the base, the vise is 3.94" high. The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.thin Parallels: Set of four pairs of thin parallels come in a fitted case. They are 5/32" thick and 3" long. The heights are 1/2", 5/8", 3/4", and 7/8". The parallels are made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within " on the top and bottom. The pairs are matched in height within ".End Mills: The 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 1/4" to 3/4" by 8ths. The set comes in a fitted case.r8 Collets: Set of five R8 round collets includes the sizes 3/16", 3/8", 1/2", 5/8", 3/4". They are made of high grade tool steel, hardened and ground to close tolerance.center Drills: Four sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, and 4 with 60 degree counter sinks Tooling Package, R8 Mini Mill Precision $ " Toolmakers screwless vise and 10 pairs of 3" long thin parallels Precision blocks and 20 piece end mill set - 2 & 4 flute (10 each) 58- piece clamping kit - 3/8"-16, 7/16" T-slots Seven piece R8 collet set, five center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Tooling package with all the essentials for an R8 mini mill. Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc All sides are flat, square and parallel to ". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within "). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" Blocks: Ground and hardened on all sides to Rc, sizes 1" x 2" x 3". Parallel within ", flat within ", and square within ". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. Page 37

38 Kits: Mill Starter Kits Kits: Spare Parts Kits 4858 Tooling Package, R8 Mini Mill Premium $ " Precision milling, professional and 10 pairs of 3" long, high grade, thin parallels Thirteen piece R8 collets, Two six-piece M42 8% cobalt end mill set - 2 & 4 flute 58 - piece clamping kit - 3/8"-16, 7/16" T-slots Premium precision blocks, five center drills - 60 countersinks Combination edge and center finder and a T-slot cleaner Premium tooling package with all the best products for your R8 mini mill. Milling Vise: 3" Kurt-style professional milling vice with detachable 360 swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 11.6" and the height is 3.1" without base, and 4.3" with base. Jaws are 3.15" wide, 0.9" deep, open 3", and are perpendicular to the ways within " in 4". The ways are parallel to the base within " in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long. Made of high-grade alloy steel hardened to Rc, parallel within " on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16"(pairs matched within "). End Mills: Two six-piece M42 8% cobalt, center cutting End Mills sets, 2 & 4 flute. Sizes: 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2". The smaller end mills have 3/8" shanks and the 1/2" end mill has a 1/2" shank. R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high grade tool steel, hardened and ground to a TIR of " or less. This set includes all the sizes required for common end mills Blocks: Premium precision blocks, ground and case hardened on all sides to Rc. Blocks are 1" x 2" x 3"; parallel, flat, and square within ". Set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC. Five piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks Spare Parts Kit, Micro Mill $ GMA-2 fuses 6 different gears This kit contains the parts that fail most often on the micro mill with a 2 Morse taper spindle Spare Parts Kit, Mini Lathe $29.95 This kit contains the parts that fail most often on the mini lathe. The kit contains: 5 GMA-5 fuses 1 Gear, 2-Speed Intermediate Shaft 1 Gear, 2-Speed Spindle 1 Belt, Timing 1 Pulley, Timing Belt Motor 1 Pulley, Timing Belt Intermediate Shaft 1 Gear, 80 Tooth 2262 Spare Parts Kit, 7x14 Mini Lathe $ Spare Parts Kit, R8, Mini Mill $33.95 This kit contains the parts that fail most often on the mini mill with the R8 spindle. The kit contains: 5 GMA-5 fuses 1 Gear, Motor 1 Gear, Intermediate 1 Gear, Spindle (1) 1 Gear, Spindle (2) 1 Gear, 2-Speed intermediate Shaft 1224 Spare Parts Kit, 3MT, Mini Mill $24.95 Lathe: 10x21 Lathe (C6) Accessories 2499 Faceplate, G0516 Combo Lathe Mill $43.95 Faceplate for Grizzly G0516 and SIEG C6 lathe. The faceplate is 8.66" (220 mm) in diameter and has 8 slots for mounting work Follower Rest, C6 Lathes $57.95 This follower rest fits the Grizzly G0516 and SIEG C6 lathes. The follower rest can support work up to 1.5" in diameter Follower Rest, C8 Lathe $58.95 This follower rest fits the SIEG C8 and SC8 lathes Milling Attachment, C6 Lathe $ Milling attachment for the SIEG C6 lathe. This milling attachment includes the mounting bracket required to mount it on a SIEG C6 lathe. The vise opening is 1.9". The width of the vise is 2.6" and the depth is 1.4". The travel is 3.6". The dial is graduated in mm (approximately 0.001") and there are 60 divisions, so the advance is 1.5 mm (0.059") per revolution Steady Rest, C6 Lathes $69.95 This steady rest fits the Grizzly G0516, and SIEG C6 lathes. The steady rest can support work up to 2.5" in diameter Steady Rest, C8 Lathes $89.95 This steady rest fits the SIEG C8 and SC8 lathes Wood Turning Tool Rest and Center, C6 $58.95 Wood turning tool rest and center for Grizzly G0516 and SIEG C6 lathe. The tool rest clamps in the standard tool post so you can turn wood on your mini lathe. The driving center fits in the lathe spindle. Lathe: 4x5 Micro Lathe (C0)/Unimat Accessories 2946 Auto Longitudinal Feed, SIEG C0 Lathes $41.95 Powers the lead screw Clutch disengages when not in use Includes drive belt and mounting bolt Fits SIEG C0 lathes 2947 Compound Rest Assembly SIEG C0 Lathes $42.95 Top slide for turning tapers 40 mm of travel Holds tools up to 1/4" shank Fits SIEG C0 lathes Page 38

39 Lathe: 4x5 Micro Lathe (C0)/Unimat Accessories 2950 Faceplate, Nano Lathe, Unimat 3 & 4 and $14.95 SIEG C0 Lathes 70 mm diameter Three slots to mount work M14x1.0 mounting thread Fits Nano Lathe Fits SIEG C0 lathes and Unimat 3 & Live Center, SIEG C0 Lathes $ mm straight shank Point is a 60º included angle Fits SIEG C0 lathes 2945 Steady Rest, SIEG C0 Lathes $25.95 Supports work up to 40 mm (1.5") in diameter Fits SIEG C0 lathes 2952 Tool Post, Unimat 3 & 4 and SIEG C0 $18.95 Lathes Two sided tool post Holds tools up to 1/4" shank Fits Unimat 3 & 4 lathes Fits SIEG C0 lathes Mounts with an M6 bolt included 2949 Wood Turning Tool Rest and Center, $36.95 Unimat 3 & 4 and SIEG C0 Lathes Wood turning tool rest and spur center 150 mm long tool rest Includes spur center with 10 mm shank Fits Unimat 3 & 4 lathes Fits SIEG C0 lathes Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories 4607 Accessory Package, 3" Spindle Flange Mini $ Lathe Complete set of mini lathe accessories Fully equip your mini lathe Steadies, centers, chucks, locks and dogs This package includes all the accessories you could want to fully equip your mini lathe. This accessory pakcage is for lathes that come from the factory with a 3" lathe chuck Accessory Package, 4" Spindle Flange, $ Mini Lathe Complete set of mini lathe accessories Fully equip your mini lathe Steadies, centers, chucks, locks and dogs This package includes all the accessories you could want to fully equip your mini lathe. This package is for mini lathes that come from the factory with a 4" lathe chuck Boring Bar Holder, 1/2" $9.95 1/2" Boring bar holder. This simple mini lathe boring bar holder fits in the standard 4- way tool post. It holds boring bars with 1/2" shanks Bullseye Lathe Tool Height Setter $9.95 Quickly and easily check lathe tool bit height Accepts any diameter work piece from 1/8" to 2 1/2" Rubber band provides hands-free operation This tool height gage will allow you to quickly and accurately check and adjust lathe tool height. No guess work, no fumbling around Carriage Lock, Mini Lathe $35.95 Locks carriage down to ways Won't rock the carriage when locking Mounts to existing follower rest mounting holes No tools required to lock the carriage This carriage lock mounts to the two tapped holes for mounting the follower rest. The carriage lock can be left in place for most operations Carriage Stop, Mini Lathe, Adjustable $24.95 This carriage stop clamps to the ways of your mini lathe to provide a repeatable stop position. This is useful when making multiple cutting passes or when making multiple parts. This stop incorporates a fine adjustment. It is locked with a lever so you need no tools to use it Carriage Stop, Bench Lathe, Adjustable $ Change Gears Set, Metal $ Attractive all metal change gears Complete set of good-looking steel change gears for the mini lathe. Includes the following:1 30 Tooth gear1 35 Tooth gear2 40 Tooth gear2 45 Tooth gear1 50 Tooth gear1 55 Tooth gear1 57 Tooth gear1 60 Tooth gear1 65 Tooth gear2 80 Tooth gear 1677 Compound Rest Bottom, Drilled $28.95 This is the bottom half of the compound rest on the mini lathe. This part has a second set of holes that moves the center of rotation of the compound rest to help eliminate chatter. Use the holes nearest the end of the part. The thread pitch is 1 mm so the compound advances 0.040" (actually ") per revolution. Use with a dial that has 40 divisions Compound Rest Bottom, Drilled, 20 TPI $ Compound Rest Bottom, Drilled and Milled $35.95 This is the bottom half of the compound rest on the mini lathe. This part has a second set of holes that moves the center of rotation of the compound rest to help eliminate chatter. This part is also about 1/4" thinner than the standard part. This makes it possible to mount AXA or Series 100 tool posts on the mini lathe. Use the holes nearest the end of the part. Do not expect to use this without a quick change tool post of some sort. It will place the standard tool post about 1/4" too low. The thread pitch is 1 mm so the compound advances 0.040" (actually ") per revolution. Use with a dial that has 40 divisions Compound Rest Bottom, Drilled and $35.95 Milled, 20 TPI 4836 Compound Rest Top, T-slot $29.95 Two 8 mm T-slots 25 mm center to center Mounts QCTP or standard 4-way tool holder This compound rest top fits any mini lathe. It gives you two 8 mm T-slots with which you can mount anything you want Cut-Off Tool Holder $19.95 This cut-off, or parting, tool holder fits in the standard 4-way tool post (and most other tool posts) and holds 1/2" tall cut-off blades. The tool holder is made of steel and has a 3/8 shank Cut-Off Tool Holder and HSS Blade $ Drawbar, 3MT x 3/8"-16, Mini Lathe $3.49 This is the 3/8-16 drawbar for the 7x10 and 7x12 mini lathe with the 3 Morse Taper spindle. This drawbar is a 3/8-16 x 5" cap screw and a flat washer. They are both hardened for long life Drawbar, 3MT x 3/8"-16, 7x14 Mini Lathe $ Drawbar, 3MT x M12, Mini Lathe $4.49 Page 39

40 Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories 5123 Faceplate, Mini Lathe, 100 mm Flange $32.95 The faceplate is 6.29" (160 mm) in diameter and has 8 slots for mounting work. The faceplate is made of cast iron.this faceplate has a 72 mm registration recess. It requires 3 M8 x 25 studs Faceplate, Mini Lathe, 80 mm Flange $28.95 The faceplate is 6.29" (160 mm) in diameter and has 8 slots for mounting work. The lathe face plate is made of cast iron. This mini lathe faceplate has a 55 mm registration recess. It requires 3 M6 x 30 studs Clamping Kit for Faceplate $ Faceplate, G0516 Combo Lathe Mill $ Faceplate, C4 Lathe $ Follower Rest, Mini Lathe $41.95 This follower rest mounts on the lathe saddle and moves with the carriage Follower Rest, Mini Lathe, Ball Bearing $ Gear, 21 Teeth $9.95 A 21 tooth change gear allows you to cut more accurate metric threads with a mini lathe. These gears are made from metal for durability. This gear fits most current production mini lathes. Measure the width of the keyway in your change gears to be sure Knob and Hand Wheel Kit $64.95 Anodized hand wheels for apron and tailstock Chrome levers for half-nuts, tool post and tailstock The attractive hand wheels are all metal, and the levers are chrome Lathe Cover, Mini Lathe $19.95 Fits 7x10, 7x12, 7x14 and 7x16 lathes This denim lathe cover provides protection for your lathe when you are not using it. The denim cloth breathes preventing moisture build-up under the cover Lathe Dog Set $35.95 Set of 5 lathe dogs for material up to 1.5" (40 mm) M6 and M8 drivers This set of lathe dogs will handle material sizes from very small up to 1.5" diameter.it includes driver pins for lathes with an 80 mm spindle flange (including mini lathes), and lathes with a 100 mm spindle flange Driver, Lathe Dog, M6 $ Driver, Lathe Dog, M8 $ Lathe Dog, 10 mm $ Lathe Dog, 15 mm $ Lathe Dog, 20 mm 4474 Lathe Dog, 30 mm $ Lathe Dog, 40 mm $ Milling Attachment Package, Mini Lathe $ Milling Attachment, Taig $66.95 The Taig milling attachment makes a good small milling attachment for the mini lathe. You must make a mounting block that is about 1" tall to mount this milling attachment on the cross slide.the total vertical travel is 1.5" and the dial provides 0.001" increments. The vise width is 2". The table is 2" x 3-3/4".Overall the milling attachment is 2.25" wide, 3.38" deep, and 5.75" tall Revolving Tailstock Chuck Adapter, 2MT $ CHUCK NOT INCLUDED: Mounts a 3" 3-jaw chuck in the tailstock Three ball bearings provide support for heavy duty load and high speed. Max Load: 1100 lbs. Maximum Rated RPM: MT standard shank Use this in conjuction with a 3" 3-jaw chuck in place of a live center. No more center drilling. This is works great for long, large diameter work pieces where a live center or steady rest just won't cut it.**note** Chuck is not included, but it works great with our 1187 lathe chuck Revolving Tailstock Chuck Adapter, 3MT $ Spindle Hand Crank $29.95 Great for threading, this allows you to turn your spindle by hand as slowly as you like. Tighten the bolt to engage the crank. Loosen to remove it Steady Rest, 0-1" Mini Lathe $46.95 The steady rest can support work up to 1" in diameter.if this product is out of stock, you may want to try our part number 2418 Steady Rest, Ball Bearing as a substitute! It is the same Steady Rest just with the added ball bearing feature Steady Rest Package, 0-2" Mini Lathe $ Steady Rest, 0-1", Mini Lathe, Ball Bearing $ Steady Rest, 1-2" Mini Lathe $ Steady Rest, 1-2", Mini Lathe, Ball Bearing $ Tachometer, Spindle $99.95 This spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to the nearest 20 RPM, of the spindle. The spindle tachometer includes the interrupter wheel and the sensor and cable Sensor and Cable 1946 Interrupter Wheel, 56 mm Diameter $ Interrupter Wheel, 66 mm Diameter $ Tachometer, Spindle, HiTorque Mini $ Machines Plugs into control panel Mounts magnetically This spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to the nearest 20 RPM, of the spindle. The spindle speed readout plugs into the jack on the control panel. Milling attachment that bolts on to the mini lathe Set of 6 two-flute end mills, 1/8" to 1/2" diameter 3/8" End mill holder and drawbar The milling attachment replaces the compound rest on the mini lathe.the vise opening is 1.9". The width of the vise is 2.6" and the depth is 1.4".The travel is 3.6". The dial is graduated in mm (approximately 0.001") and there are 60 divisions, so the advance is 1.5 mm (0.059") per revolution.this package includes drawbars for all mini lathes. For other lathes you will probably need to make a drawbar from 3/8-16 threaded rod Milling Attachment, C6 Lathe $ Milling Attachment, Mini Lathe $ Page 40

41 Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories 2658 Tachulator Tachometer & SFM Meter $ Digital tachometer for lathes and mills Displays rpm and surface feet per minute Range to 9999 rpm, 9999 SFM Accuracy and resolution to 1 rpm Cutter or work diameter to 99.99" This kit includes the Tachulator module in an aluminum enclosure, plus the sensor and power supply. Features include: Period counting for fast updates even at slow rpm inputs Calculates SFM from rpm and entered diameter Cutter or work diameter from 0.01" to 99.99" Low power consumption- 50mA typically at 9-12VDC Bright attractive 4 digit 0.56 high display with decimal points Sensor contains light source - will work in complete darkness Crystal time base for high accuracy and stability Professional quality conservative design and manufacturing Screw terminal block for sensor connection Usable with multiple sensor heads using a DPDT or 2-pole multiple-position switch 1526 Threading Dial Assembly (Inch) $19.95 This kit includes all the parts needed to add a threading dial for cutting inch threads to a mini lathe.this assembly DOES NOT help you to cut inch threads on a metric lathe with a metric lead screw Threading Dial Assembly (inch), G0516 $28.95 Lathe: 8.5x16 Lathe (C4) Accessories 4665 Accessory Package, C4 Lathe $ Complete set of C4 lathe accessories Fully equip your C4 lathe Steadies, centers, chucks,faceplate and dogs This package includes all the accessories you could want to fully equip your C4 lathe Chip Tray, SC4, C4 Lathe $54.95 Chip tray for the SC4 and C4 Lathes 1204 Tool Post $14.95 Four-position tool post for the mini lathe. This is the tool holder that comes on the mini lathe. On most mini lathes it is the correct size for 5/16" tools. On "early" Homier and Cummins lathes it is the correct size for 3/8" tools. The tool holder is 2" square and 1.5" tall. The tool slot is 0.64" tall and is 0.32" from the bottom Tool Holder Screws, Set of 8 $ Tooling Plate, Milling Attachment $64.95 This tooling plate works with the lathe milling attachment. It is 120 mm (4.72") square and includes four clamps. The holes are threaded M Wood Turning Tool Rest and Center, Mini $54.95 Lathe Woodturning tool rest and spur center The mini lathe tool rest clamps in the standard tool post so you can turn wood on your mini lathe. The driving center fits in the lathe spindle Wood Turning Tool Rest and Center, C6 $58.95 Lathe: 7x10/12/14 Mini Lathe (C2/C3) Assemblies 1769 Compound Rest Assembly $72.95 This is a complete compound rest for the mini lathe. It includes the tool post and locking handle not shown in the photo Faceplate, C4 Lathe $35.95 Faceplate SIEG C4 lathe.the faceplate is 7.1" (180 mm) in diameter and has 8 slots for mounting work.this faceplate will not fit with the plastic chuck guard in place Clamping Kit for C4 Faceplate $ Faceplate, C8 Lathe $44.95 Faceplate SIEG C8 lathe.the faceplate is 10" (254 mm) in diameter and has 8 slots for mounting work.this faceplate will not fit with the plastic chuck guard in place Clamping Kit for C8 Faceplate $ Follower Rest, C4 Lathe $48.95 This follower rest fits the SIEG C4 lathes The follower rest can support work up to 2.2" in diameter Steady Rest, C4 Lathe $59.95 This steady rest fits the SIEG C4 lathes The steady rest can support work up to 2.2" in diameter Mini Lathe Headstock Assembly $ This is the headstock assembly for a 7x10 or 7x12 mini lathe. It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts on the spindle, and all parts on the intermediate shaft, except the pulley. Lathe: 8x12/14 Lathe Accessories 2544 Faceplate, 8x12 Lathe $37.95 Faceplate 8x12 lathe.the faceplate is 7.87" (200 mm) in diameter and has 8 slots for mounting work.this faceplate mounts on the same flange as a 4" 3-jaw chuck mounts Tailstock Assembly $71.95 This is a kit of all the parts required to make a complete tailstock for the mini lathe. The center height of this tailstock is approximately 90 mm. The quil is 2 Morse taper Follower Rest, 8x12, 8x14 Lathes $52.95 This follower rest fits 8x12 and 8x14 lathes. The follower rest can support work up to 2.5" in diameter Tailstock Assembly, Cam Lock $79.95 This is the tailstock from the HiTorque mini lathe. It has a factory-installed cam lock mechanism. It holds 2 Morse taper tooling Steady Rest, 8x12, 8x14 Lathes $61.95 This steady rest fits 8x12 and 8x14 lathes. The steady rest can support work up to 2.5" in diameter. Page 41

42 Lathe: Tool Post Grinders Lathe: Tool Post Grinders Lathe: Tooling 2001 Tool Post Grinder, Mini Lathe $ ,000 RPM This tool post grinder is designed specifically for the mini lathe. To install it, you simply replace the compound rest. The bottom of the mounting foot is approximately 50 mm (2") below the centerline of the grinding wheel. The grinder comes with 2 different grit grinding wheels (60 and 80 grit), and the tools needed to change them. Motor 150 watts, 120V, 60 Hz. The tool post grinder is approximately 8" tall, 9" long and 3.5" thick Arbor, Grinding Wheel $ Belt, Multi-V $ Grinding Wheel, 120 Grit 2585 Grinding Wheel, 180 Grit 2586 Grinding Wheel, 240 Grit 2184 Grinding Wheel, 60 Grit 1767 Grinding Wheel, 80 Grit 4670 Tool Post Grinder, Bench Lathe $ Tool Post Grinder, C6 Lathe $ Ball and Radius Turning Tool, Large, OMW $ The OMW Large Radius Ball Tool like its smaller counterpart is designed to cut round shapes or curves in brass, aluminum, steel, wood or plastic on your own lathe. Balls in the ends of rods, shafts, or handles are easily turned with the tool. You can also make ball joints, governor weights, railing knobs, round contact points for tools, nose cones, and many other useful and decorative objects. The OMW Radius tool is sized for lathes of 5" or greater swing, and the ½" shank size will fit most standard tool holders. The tool will cut convex curves up to 1¾" in diameter. The tool is manufactured from the highest quality materials. Frames are machined from high strength aluminum alloy. The handle is tool steel, the pivot pins are hardened and ground and rotate in custom bronze bearings. The tool is completely machined from solid metal stock, there are no stamped, cast or pressed parts. A pre-ground High Speed steel tool bit is included. Each tool is manufactured in the USA by OMW Corporation and is carefully inspected and checked before shipment. The tool is designed so that the center height is 3/8" from the bottom of the shank. The tool comes with a pre-ground HSS tool bit which may be easily resharpened or modified Ball and Radius Turning Tool, Small, OMW $ Tool Bit, Large Ball and Radius Turning $21.95 Tool 2964 Tool Bit, Small Ball and Radius Turning $18.95 Tool 1970 Ball Turning Attachment $47.95 This attachment allows you to turn balls on the mini lathe. The tool will cut convex curves up to 2" in diameter. Includes one presharpened tool bit. You must make a mounting block for the ball turning attachment. Dead Centers Morse taper solid dead centersthese dead centers have a 60 degree included point angle.half-notched dead centers have about half the point cut away so you can work closer to the end of the work piece Dead Center, 1MT $ Dead Center, 1MT, Carbide Tip $ Dead Center, 1MT, Carbide Tip, Half- Notched 5473 Dead Center, 2MT $ Dead Center, 2MT $ Dead Center, 2MT, Carbide Tip $ Dead Center, 2MT, Carbide Tip, Half- $12.95 Notched 5474 Dead Center, 3MT $ Dead Center, 3MT 5477 Dead Center, 3MT, Carbide Tip $ Dead Center, 3MT, Carbide Tip, Half- $15.95 Notched 1911 Knurler, Large Capacity $ to 2" (50 mm) diameter capacity Fits standard 4-way and quick change tool posts Includes three sets of knurls This scissors knurler is made to our design, specifically for the mini lathe. This knurler fits in the standard tool post of the mini lathe without any modification. It also works with any of the quick change tool posts we sell. The mounting bar is 3/8" (9.5 mm) tall so it replaces a 3/8" tool bit. It comes with fine (33 lines per inch, 0.8 mm pitch), medium (21 lines per inch, 1.2 mm pitch), and coarse (14 lines per inch, 1.8 mm pitch) diamond knurls Knurler, Large Capacity with 6 sets of $63.95 knurls 1733 Knurls, Coarse Diamond $ Knurls, Coarse Straight $ Knurls, Fine Diamond $ Knurls, Fine Straight $ Knurls, Medium Diamond $ Knurls, Medium Straight $5.95 Lathe Mandrels, Individual Sizes Standard taper:.0005" per 1" Smaller end is.0005" undersized Made of tool steel hardened and ground Lathe and OD grinder mandrels. Designed for setting-up accurately bored or reamed blanks and castings Lathe Mandrel, 1/8" x 2-1/2" $ Lathe Mandrel, 3/16" x 3" $ Lathe Mandrel, 1/4" x 3-3/4" $ Lathe Mandrel, 5/16" x 4" $ Lathe Mandrel, 3/8" x 4-1/4" $ Lathe Mandrel, 7/16" x 4-1/4" $ Lathe Mandrel, 1/2" x 5" $ Live Center, 2MT Short $19.95 Point is a 60º included angle Short 2 Morse taper for the mini lathe Fits Jet 1014 mini wood lathe 1.495" diameter barrel This mini lathe live center fits the tailstock of the mini lathe. The point is a 60º included angle Live Center, 2MT Standard Bull Nose $84.95 For tubing and other hollow work This bull nose live center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The nose is a 70º included angle.the diameter of the nose is 2.49". The diameter of the flat on the front of the nose is 0.46". Page 42

43 Lathe: Tooling Lathe Chucks: Accessories 1592 Live Center, 2MT Standard Heavy Duty $23.95 This center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The point is a 60º included angle.the maximum diameter of the point is 0.98". The OD of the body is 1.77". The distance from the tip to the front of the body is 1.66".The rated radial load is 90 lbs. The maximum speed is 5000 RPM Live Center, 0MT $ Live Center, 1MT Heavy Duty $ Live Center, 3MT $ Live Center, 2MT Standard Multi Point $ different live center points Precision needle and thrust bearings Bull nose and conical tips In a fitted case This live center set gives you lots of options to support large and small parts Live Center, 3MT Multi Point $ Live Center, 2MT Standard Multi Point $ live center points Precision needle and thrust bearings Bull nose and conical tips In a fitted wood case This live center set gives you lots of options to support large and small parts.there are five 60 degree live center tips of four different diameters. There are two of the largest "standard" center.the 60 degree centers range in diameter from 0.22 to 0,53" (5.5 to 13.5 mm). The 60 degree conical center is for pointed work pieces.the "bull nose" center is 1.22" (31 mm) in diameter.there is a tapered pin to pop the tips out of the live center Live Center, 3MT Multi Point $ Rotating Tailstock Chuck $59.95 This is a "live" drill chuck for the tailstock. Use it to support small diameter work where a live center is not practical.the shank is 2 Morse taper. The drill chuck is 1/2" capacity Tailstock Turret Tool Holder, 2MT $99.95 This tailstock turret tool holder has positions for 6 tools. The tool positions are 5/8" diameter holes with a set screw to retain the tool holder. The shank is a 2 Morse taper Tailstock Turret Tool Holder, 3MT $ Jaws, Inside for 3" 3-Jaw Chuck $32.95 Inside jaws for 3" 3-jaw chuck. These are replacement jaws for the 3" 3-jaw chuck that comes on the mini lathe. Look carefully at the jaws before you decide to purchase inside or outside jaws Jaws, 4" 4-Jaw Chuck $ Jaws, Inside for 4" 3-Jaw Chuck $ Jaws, Outside for 3" 3-Jaw Chuck $ Jaws, Outside for 4" 3-Jaw Chuck $ Jaws, 3" 4-Jaw Chuck $ Jaws, 5" 4-Jaw Chuck $ Jaws, Inside for 5" 3-Jaw Chuck $ Jaws, Inside for 6" 3-Jaw Chuck $ Jaws, Outside for 5" 3-Jaw Chuck $49.95 Lathe Chucks: Adapters 1768 Key, Lathe Chuck, 5/16" Square $8.95 This chuck key fits our 3-Jaw 3" chuck, PN This is the chuck that comes on the mini lathe. This key will also fit any other chuck that requires a 5/16" key Key, Lathe Chuck, 1/2" Square 5480 Key, Lathe Chuck, 1/4" Square $ Key, Lathe Chuck, 3/8" Square 5481 Key, Lathe Chuck, 5/16" Square $ Key, Lathe Chuck, 7/16" Square 3409 Key, Lathe Chuck, 7/32" Square $ Adapter, 4" Lathe Chuck $19.95 This adapter lets you mount 4" 3- or 4-jaw lathe chucks on your mini lathe.use this adapter with chucks that have a 72 mm registration recess diameter.the adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three holes.this adapter is cast iron and has a net thickness of 0.66". The net thickness is the distance from the rim of the lathe spindle to the back of the chuck Adapter, 4" Lathe Chuck, 3-Jaw $ Adapter, 4" Lathe Chuck on 4" Rotary $83.95 Table Mounts a 4" 3- or 4-jaw chuck on 1810 Rotary Table Maximum diameter matches chuck diameter 2358 Adapter, 5" Lathe Chuck $28.95 This adapter lets you mount 5" 3-jaw lathe chucks on your mini lathe in place of a 3" (80 mm) chuck.the adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three holes.this adapter has a 92 mm diameter registration boss, and has 3 chuck mounting holes Adapter, 5" Lathe Chuck $ Adapter, 5" Lathe Chuck $28.95 This adapter mounts a 5" 3- or 4-jaw lathe chuck with a 95 mm registration recess on a flange for a 4" chuck with a 72 mm registration boss. It works on 8x12 and 8x14 lathes as well as the Harbor Freight 5980 multipurpose machine. It also fits the SIEG C4 lathe Adapter, 5" Lathe Chuck to C8 Spindle $34.95 Fits 5" lathe chucks with a 95 mm registration recess This adapter mounts a 5" lathe chuck with a 95 mm registration recess to the C8 and SC8 spindle. It works on all variants of the SIEG C8 lathe Adapter, 6" Lathe Chuck $34.95 Fits 6" 4-jaw lathe chucks with a 65 mm registration recess DO NOT BUY THIS FOR LMS CHUCKS 2038 and 2028 This adapter mounts a 6" 4-jaw lathe chuck with a 65 mm registration recess on a flange for a 4" chuck with a 72 mm registration boss. It works on 8x12 and 8x14 lathes as well as the Harbor Freight 5980 multipurpose machine. It also fits the SIEG C4 and SC4 lathes Adapter, 6" Lathe Chuck $34.95 Fits 6" lathe chucks with a 130 mm registration recess This adapter mounts a 6" 3-jaw lathe chuck with a 130 mm registration recess on a flange for a 4" chuck with a 72 mm registration boss. It works on 8x12 and 8x14 lathes as well as the Harbor Freight 5980 multipurpose machine. It also fits the SIEG C4 and SC4 lathes. Page 43

44 Lathe Chucks: Adapters Lathe Chucks: Chucks Backplate Lathe Chuck Adapters, Semi Machined Lathe side is fully machined Chuck side must be machined to suit Use for European style chucks These are a semi-machined adapter plate. The side that attaches to the lathe flange is fully machined. The side on which the lathe chuck mounts is not finished. Mount the backplate adapter on your lathe and complete machining of the chuck-mounting side. This ensures two things; that it will fit your chuck, and that it is concentric on your lathe Backplate Lathe Chuck Adapter 3" to 3" $ Backplate Lathe Chuck Adapter, 4" to 3" $ Backplate Lathe Chuck Adapter, 5" to 3" $ Backplate Lathe Chuck Adapter, 5" to 4" $ Backplate Lathe Chuck Adapter, 6" to 4" $39.95 Lathe Chuck Adapters We stock a wide range of cast iron threaded lathe chuck adapters. These adapters are used to mount flat back lathe chucks on lathes with threaded spindles Chuck Adapter, 1-1/2"-8 Thread 6" $39.95 Diameter 1791 Chuck Adapter, 1"-10 Thread 4" Diameter $ Chuck Adapter, 1"-10 Thread 4" Diameter, $ Holes 2333 Chuck Adapter, 1"-10 Thread 5" Diameter $ Chuck Adapter, 1"-10 Thread 6" Diameter $ Chuck Adapter, 1"-8 Thread 4" Diameter $ Chuck Adapter, 1"-8 Thread 4" Diameter, $ Holes 2331 Chuck Adapter, 1"-8 Thread 5" Diameter $ Chuck Adapter, 1"-8 Thread 6" Diameter $ Chuck Adapter, 1-1/2"-8 Thread 4" $23.95 Diameter 1918 Chuck Adapter, 1-1/2"-8 Thread 4" $23.95 Diameter, 3 Holes 5126 Chuck Adapter, 1-3/4"-8 Thread 6" $39.95 Diameter 2022 Chuck Adapter, 1/2"-20 Thread 3" $21.95 Diameter, 3 Holes 1923 Chuck Adapter, 2-1/4"-8 Thread 6" $39.95 Diameter 1920 Chuck Adapter, 3/4"-16 Thread 3" $23.95 Diameter, 6 Holes 1921 Chuck Adapter, M39 x 4 Thread 4" $23.95 Diameter 1922 Chuck Adapter, M39 x 4 Thread 6" $39.95 Diameter 2335 Chuck Adapter, Unthreaded 4" Diameter $ Chuck Adapter, Unthreaded 6" Diameter $39.95 Lathe Chuck Capacities See the lathe chuck capacity chart at Lathe Chuck, 3-Jaw 3" $84.95 Self-centering 3-Jaw lathe chuck. 3" (80 mm) diameter Includes chuck key, inside and outside jaws Plain back mounting High quality steel, hardened and ground This 3 inch 3-Jaw self-centering lathe chuck is the one that comes on the mini lathe. It includes a chuck key and inside and outside jaws. This three jaw chuck has a 0.63" (16 mm) through hole. It holds work up to 2.48" (63 mm) in diameter. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum Lathe Chuck, 3-Jaw 4" $ Lathe Chuck, 3-Jaw 5" $ Lathe Chuck, 3-Jaw 6" $ Lathe Chuck, 3-Jaw 4" with Adapter $ jaw self-centering lathe chuck 4" (100 mm) diameter Includes chuck key, inside and outside jaws and mounting bolts Includes an adapter to mount on a 3" (80 mm) flange High quality steel, hardened and ground 4" 3-Jaw self-centering lathe chuck with adapter for the mini lathe. Includes chuck key, inside and outside jaws, and mounting bolts. The chuck can hold work up to 3.15" (80 mm) in diameter and comes with an adapter for the mini lathe so that you can bolt it on in place of a 3" (80 mm) chuck. This chuck has a 0.87" (22 mm) through hole. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum Lathe Chuck, 3-Jaw 5" with Adapter $ Lathe Chuck, 3-Jaw 6" for C8 $ jaw lathe chuck 6" (160 mm) diameter Includes chuck key, inside/ outside jaws Specific flange backplate for mounting on C8 lathe 6" 3-Jaw lathe chuck.includes chuck key, reviersible inside and outside jaws.the chuck can hold work up to 145 mm (5.71") in diameter Lathe Chuck, 4-Jaw 3" $ Jaw Lathe Chuck 3" (80 mm) diameter Each jaw is independently adjustable and reversible Plain back mounting High quality steel, hardened and ground This set of 4-jaw lathe chucks for sale includes the 3" 4-jaw chuck, a chuck key, and reversible jaws. This chuck has a 0.87" (22 mm) through hole. It holds work up to 3.15" (80 mm) in diameter Lathe Chuck, 4-Jaw 4" $ Lathe Chuck, 4-Jaw 5" $ Lathe Chuck, 4-Jaw 6" $ Lathe Chuck, 4-Jaw 4" Self-Centering $ jaw self-centering lathe chuck 4" (100 mm) diameter Plain back mounting Includes chuck key, inside and outside jaws High grade tool steel 4 inch, 4-Jaw self-centering lathe chuck for square or octagonal work. The through bore of this chuck is 20 mm (0.79"). The chuck can hold work up to 80 mm (3.15") in diameter. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.004" maximum Lathe Chuck, 4-Jaw 3" Self-Centering $ Page 44

45 Lathe Chucks: Chucks Machines: Band Saws 1697 Lathe Chuck, 4-Jaw 4" with Adapter $ jaw lathe chuck 4" (100 mm) diameter Each jaw is independently adjustable and reversible Includes an adapter to mount on a 3" (80 mm) flange High quality steel, hardened and ground This 4" 4-Jaw independent chuck includes an adapter to fit the mini lathe spindle. It includes a chuck key and reversible jaws.the adapter mounts to the spindle with three studs so additional holes in the spindle are not required.this chuck has a 0.98" (25 mm) through hole. The chuck can hold work up to 3.94" (100 mm) in diameter Lathe Chuck, 4-Jaw 5" with Adapter $ Lathe Chuck, 4-Jaw 5" for C8 $ jaw independent lathe chuck 5" (130 mm) diameter Includes chuck key, inside/ outside jaws Specific flange backplate for mounting on C8 lathes 5" 4-Jaw independent lathe chuck.includes chuck key, reviersible inside and outside jaws.the chuck can hold work up to 110 mm (4.33") in diameter Lathe Chuck, 4-Jaw 6" for C8 $ jaw independent lathe chuck 6" (160 mm) diameter Includes chuck key and reversible jaws Specific flange backplate for mounting on C8 lathe 6" 4-Jaw independent lathe chuck.includes chuck key, reversible jaws.the chuck can hold work up to 160 mm (6.3") in diameter Lathe Chuck, 6-Jaw 4" $ jaw self centering lathe chuck 4" (100 mm) diameter Includes chuck key and mounting bolts Plain back mounting Excellent for holding thin walled workpieces The jaws on this 4" 6-Jaw self-centering lathe chuck are hardened and ground. Includes chuck key and mounting bolts.because the chuck is designed to hold tubing, outside jaws are not included.this chuck has a 1.02" (26 mm) through hole. The chuck can hold work up to 3.15" (80 mm) in diameter.the radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum Band Saw, Bench Top $ Uses widely available 44-7/8" blades Two blade speeds 3" (80 mm) x 4" (100 mm) capacity Comes with a 14 TPI bi-metal blade Includes stand with quick-adjusting cast iron vise This bench top band saw is perfect for the small shop. It's got the capacity of larger floor-standing saws but takes a fraction of the space. Cast iron vise swivels for angle cuts.the two speed motor makes it great for ferrous (read: steel) and non-ferrous (read: aluminum) metals.it's quieter and more accurate than chop saws.it takes less than 5 minutes to remove the saw from the base and configure it for portable use. The double-chain drive makes it more rugged than the competition. Machines: Lathes 5200 HiTorque 7x16 Deluxe Mini Lathe $1, Features of 5100 (most powerful, most low-speed torque, gearless spindle, cam-lock TS, 4" spindle) Extended bed (16" between centers) for more workspace Includes DRO readouts on compound rest and cross slide Metal hand wheels and chrome levers Includes 0XA wedge-type quick change tool post and five tool holders The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.this lathe comes equipped with digital readouts on the cross slide and compound rest. The attractive hand wheels are all metal, and the levers are chrome. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 rpm continuously in both directions. There are no gears to shift.the all steel, wedge-type quick change tool posts accepts turning tools up to 1/2" shank. It comes with five toolholders (for details, see part number 3112).Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factoryinstalled threading dial.the lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.the LittleMachineShop.com model 5200 HiTorque Mini Lathe is a version of the SIEG SC2.*NOTE* We ship machines only to the US and Canada HiTorque 7x16 Mini Lathe $ Extended bed (16" between centers) provides more working room Most powerful lathe with most low-speed torque in its class 4" 3-jaw lathe chuck No gears in spindle drive Cam lock tailstock The LittleMachineShop.com HiTorque 7x16 Mini Lathe for sale is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.the 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift.the cross feed and compound rest dials are graduated in 0.001" and mm. A 4" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools.real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.this HiTorque 7x16 Mini Lathe for sale includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.the LittleMachineShop.com model 5100 HiTorque Mini Lathe is a longer version of the SIEG SC3.*NOTE* We ship machines only to the US and Canada. Page 45

46 Machines: Lathes Machines: Mills 3540 HiTorque 8.5x20 Bench Lathe $1, Inch dials, inch and metric threading 120VAC 60 Hz 1000 Watt (1.34 HP) brushless DC drive Power longitudinal feed and power cross feed 4" (100 mm) 3-jaw self centering lathe chuck The LittleMachineShop.com model 3540 HiTorque 8.5x20 Bench Lathe is the best in its class. No other metal lathes in this size offer power cross feed.the 1000 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2000 rpm continuously in both directions. There are no gears to shift.the cross feed and compound rest dials are graduated in 0.001" and advance 0.050" per turn. The metal lathe is equipped with a 4-way indexing tool post set for 10 mm tools.a reversible 2 mm pitch lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.2 to 8 mm pitch with the change gears that are included. All the gears on this lathe are metal.the LittleMachineShop.com model 3540 HiTorque 8.5x20 Bench Lathe is a version of the SIEG SC4 bench lathe. *NOTE* We ship machines only to the US and Canada SIEG C3 7x14 Mini Lathe $ Full featured miniature lathe at an incredible price Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key Variable speed with two speed ranges for low speed torque Digital spindle speed readout Cam-lock tailstock The SIEG C3 7x14 Mini Lathe has all the features you want at an incredibly low price. Full 14" bed length with a cam-lock tailstock for your longer work pieces. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch. The cross feed and compound rest dials are graduated in 0.001" and mm. The miniature lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools. The SIEG C3 7x14 Mini Lathe includes a chip tray, a backsplash guard, and a threading dial HiTorque Bench Mill $1, Larger than mini mills 750 watt (1 hp) brushless DC variable speed drive No gears in spindle drive R8 spindle and drill chuck Tapping mode for reversing taps out The LittleMachineShop.com HiTorque Bench Mill 5500 is a step up in size, rigidity, and power compared to a mini mill. This benchtop mill for sale provides a larger table, more travel, and more horsepower.a 750 watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque.the 23.4" x 5.5" (595 mm x 140 mm) table provides a large work area.the HiTorque Bench Mill incorporates a true quill and drill press-style handles for easy drilling. A button on the end of each handle reverses the spindle to make tapping easy.the control panel includes a digital spindle speed display HiTorque Micro Mill, 2MT Spindle $ Most powerful mill in its class & most low-speed torque in its class No gears in spindle drive #2 Morse taper spindle Digital spindle speed readout The LittleMachineShop.com HiTorque Micro Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.the 250 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 5000 rpm continuously. There are no gears or belts to shift. And, with no gears, the HiTorque Micro Mill is the quietest in its class.the large mill table provides 50% more width than other micro mills. The resettable feed dials allow you to zero them at any point.the HiTorque Micro Mill has a drill press handle for drilling. It also has Z-axis fine feed with 0.001" resolution for milling operations. This is a version of the SIEG SX1P Micro Mill HiTorque Micro Mill, ER-16 Spindle $ Most powerful mill in its class & most low-speed torque in its class No gears in spindle drive Digital spindle speed readout ER-16 spindle, perfect for small cutting tools The LittleMachineShop.com HiTorque Micro Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.the 250 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 5000 rpm continuously. There are no gears or belts to shift. And, with no gears, the HiTorque Micro Mill is the quietest in its class.the large mill table provides 50% more width than other micro mills. The resettable feed dials allow you to zero them at any point.the HiTorque Micro Mill has a drill press handle for drilling. It also has Z-axis fine feed with 0.001" resolution for milling operations. This is a version of the SIEG SX1P Micro Mill HiTorque Mini Mill $ Most powerful mini mill machine in its class Most low-speed torque in its class No gears in spindle drive Largest table and X-Y travel in its class R8 spindle and drill chuck The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.this mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel.the 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill machine is the quietest in its class.the large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.the HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.*note* We ship machines only to the US and Canada. Page 46

47 Machines: Mills Machines: Stands/Cabinets 4190 HiTorque Mini Mill, Deluxe $1, Includes 3-axis DRO and interlocked spindle lock Most powerful mill in its class with the most low speed torque No gears in spindle drive Largest table and X-Y travel in its class R8 spindle and drill chuck The Model 4190 Deluxe HiTorque Mini Mill has all the features of our popular Model 3990 HiTorque Mini Mill, plus:* 3-axis digital readout (DRO) with Bluetooth and 7" tablet display* Electrically interlocked spindle lock* Machined aluminum handwheels and color keyed drill handlesthe LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.this mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel.the 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class.the large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.the HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.*note* We ship machines only to the US and Canada SIEG X2D Mini Mill $ Full featured mini mill at an incredible price 350 Watt variable speed DC drive Largest table and X-Y travel in its class R8 Spindle taper Dovetail solid column and air spring head support The SIEG X2D Mini Mill has all the features you want at an incredibly low price. This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills.the large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.the X2D Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.this model also includes the air spring head support for even support throughout the Z-axis travel Stand Cabinet, HiTorque 7x16 Mini Lathe $ SC Stand Cabinet, HiTorque Bench Mill SX2.7 $ Metal stand and chip tray for bench mill Single column design 20.79" x 23.94" x 33.66" (528 mm x 608 mm x 855 mm) Cabinet for storage with locking door Fits the HiTorque bench mill and SX2.7 bench mills This single column black stand comes with a built in cabinet and is suitable the HiTorque bench mill and all SX2.7 bench mills. The cabinet has one shelf. The chip tray has been upgraded to provide years of service. The footprint of the stand column is 14.57" x 21.65" (370 mm x 550 mm) Has bolting slots for securing the stand to a floor for additional stability and safety Stand Cabinet, HiTorque Mini Mill $ X2L/SX2L Metal stand and chip tray for mini mill Single column design 16.1" x 19.3" x 35.0" (410 mm x 489 mm x 889 mm) Cabinet for storage with locking door Fits the HiTorque mini mill and X2L/SX2L mini mills This single column black stand comes with a built in cabinet and is suitable the HiTorque mini mill and all X2L/SX2L mini mills. The cabinet has one shelf. The chip tray has been upgraded to provide years of service. Has bolting slots for securing the stand to a floor for additional stability and safety Stand Cabinet, HiTorque Micro Mill X1/SX1 $ Stand Cabinet, X2/SX2 Mini Mill $ Metal stand and chip tray for mini lathe Single column two door design 34.9" x 13.9" x 34.9" (886 mm x 354 mm x 886 mm) Cabinet for storage with locking door Fits 7x16 SC3 mini lathes This single column two door design black stand comes with a built in cabinet and is suitable for all 7x16 SC3 mini lathes. The cabinet has one shelf. The chip tray has been upgraded to be more robust than the trays that ship with most mini lathes. Has bolting slots for securing the stand to a floor for additional stability and safety Stand Cabinet, 7x10 C2 Mini Lathe $ Stand Cabinet, 7x12 C2C/SC2 Mini Lathe $ Stand Cabinet, 7x14 C3 Mini Lathe $ Stand Cabinet, HiTorque Bench Lathe $ C4/SC4 Metal stand and chip tray for bench lathe Shipped disassembled, requires assembly Fits all HiTorque Bench Lathes Fits all C4 and SC4 lathes This double column black stand includes two built-n cabinets and a chip tray. Page 47

48 Mill: HiTorque Bench Mill (SX2.7) Accessories Mill: HiTorque Bench Mill (SX2.7) Accessories 5846 Deluxe Productivity Upgrade Package, $ HiTorque Bench Mill Includes the 5655 Spindle Lock, the 5633 Quill Stop, and the 5657 power lift in one easy kit Makes tool changes easier, faster, and more convenient. Electro-magnetic interlock disables power to the motor with the fork of the Spindle Brake engaged. Quick and accurate way to set quill depth of cut on 5500 Bench Top Mill. Power lift Switch is mounted to the system plate and has three momentary positions: up, off, and dow The Spindle Brake provides a convenient method of locking the spindle freeing both hands to complete a tool change. A safety switch ensures that power to the motor is disabled when the Spindle Brake is engaged. This Spindle Brake features an integral flip-style locking fork which locks the mill s spindle when engaged and does not require a separate locking device to be mounted and removed from the mill. To operate, flip the Spindle Brake fork down over the spindle while the spindle is at rest. Then rotate the spindle by hand until the set screws in the Spindle Brake fork mesh with a spindle spline. Once the tool change is complete, lift the Spindle Brake fork up into the retracted position and you are ready to go. The Quill Stop provides a quick and accurate way to set the quill depth of cut. It is great for drilling multiple holes to the same depth. The Quill Stop is also very handy in performing single or repeated chamfering of parts. To set up the chamfer the first time on a part, turn the mill off and simply lower the cutter to the top of the part, lock the fine feed knob, and back-off one full turn (turn the Button Nut clockwise as viewed from the top). Then start the mill and turn the Button Nut on the Quill Stop counter clockwise in small increments until the cutter contacts the part. Then continue turning the Button Nut counterclockwise and alternately lowering the quill until the desired chamfer is achieved. The Quill Stop works equally well performing inside chamfers using typical chamfering mills, and outside chamfers using, for example, a hollow mill. The Power Lift system for the Little Machine Shop 5500 mill functionally replaces the Z-Axis manual hand wheel that is used to raise and lower the mill head. Using the Power Lift system is really easy, just press the switch up or down and release, and you are done. It is much faster than using the hand wheel, and much easier on your shoulder Power Drawbar, Bench Mill $ Power Lift System, HiTorque Bench Mill $ Productivity Upgrade Package, HiTorque $ Bench Mill 5633 Quill Stop, HiTorque Bench Mill $ Spindle Lock, HiTorque Bench Mill $ Spindle Lock, HiTorque Bench Mill, Flip $ Style 5586 Tramming Set, Bench Mill $59.95 Everything you need to tram a bench mill Dial test indicator Universal arm locks with one knob Shim assortment This package includes everything you need to tram your bench mill and square your vise. Mount the indicator on the universal arm, put the shank of the universal arm in a drill chuck, and check the four corners of your mill table.adjust the tram by shimming under the base of the column. Mill: HiTorque Mini Mill (SX2) Accessories 3954 Feed Screw Parts, 20 TPI, HiTorque Mini $59.95 Mill These parts change HiTorque mini mills to 20 thread per inch feed screws on the X- and Y-axis. Each rotation of the hand wheel will advance the table 0.050". The kit includes two feed screws, two nuts, two 50 division dials, plus the springs and keys that you are going to lose during disassembly. Mill: Micro Mill (X1) Accessories 4249 Feed Screw Parts, Metric, HiTorque Mini $69.95 Mill This kit changes the HiTorque mini mill to metric feed screws on the X- and Y-axis. It also changes the Z-axis to read in mm. The kit includes two feed screws, two nuts, two dials, two scales, the Z-axis feed knob, plus the springs, pins and keys that you are going to lose during disassembly High Speed Spindle Kit, HiTorque Mini Mill $89.95 Fits HiTorque mini mills 5000 rpm top speed Includes two pulleys and two spindle bearings These pulleys change the spindle speed range to 5000 rpm max. It's important to change the bearings, as the standard bearings are not rated to 5000 rpm. The increased speed is great for small cutters such as those used for engraving. Just remember that doubling the speed will cut the torque in half. This uses the same belt as the standard drive pulleys. We do not have installation instructions completed yet, so you are on your own for installation. The pulleys are easy, but you have to press the spindle out and back in. A hydraulic press makes it an easy task. The initial installation takes a couple hours, but after the new bearings are installed, switching pulleys to the original set shouldn't take more than 20 minutes Solid Column Conversion Kit, HiTorque $ Mini Mill Converts a HiTorque Tilting Column Mini Mill to the solid column version. This kit converts a HiTorque Tilting Column Mini Mill (part number 3900) to solid column. The kit includes the base and column from the HiTorque Solid Column Mini Mill (part number 3960), the fasteners needed to connect them, and complete instructions Spindle Lock, HiTorque Mini Mill $46.00 Makes tool changes easier, faster, and more convenient Loosen and tighten keyless chucks with one hand The spindle brake provides a fixed position for inserting the locking pin and frees both hands for changing tools.fits SIEG SX2 mills 4762 Spindle Lock, Interlocked, HiTorque Mini $ Mill Makes tool changes easier, faster, and safer When engaged, the plunger automatically drops into the locking hole as the spindle is rotated An electro-magnetic interlock disables power to the motor when the spring plunger is engaged Frees both hands for changing tools Loosen and tighten keyless chucks with one hand The spindle brake provides a semi-automatic method of locking the spindle freeing both hands to complete a tool change. A safety switchdisables power to the motor when the spring plunger is engaged.fits SIEG SX2 mills 5585 Tramming Set, Mini Mill $56.95 Everything you need to tram a mini mill Dial test indicator Universal arm locks with one knob Shim assortment This package includes everything you need to tram your mini mill and square your vise. Mount the indicator on the universal arm, put the shank of the universal arm in a drill chuck, and check the four corners of your mill table.adjust the tram by shimming under the base of the column Drawbar, 2MT x 3/8"-16, Micro Mill 5-5/8" long when measured like a bolt 3/8"-16 thread This drawbar is for the micro mill. It has a 3/8"-16 drawbar thread. Page 48

49 Mill: Micro Mill (X1) Assemblies Mill: Micro Mill (X1) Assemblies Mill: Mini Mill (X2) Accessories 3860 Micro Mill X-Y Table Assembly $ Complete X-Y table assembly for a micro mill Includes long table and extended X-axis travel This is the complete X-Y table assembly for a Super X1 Micro Mill. The table is 145 mm (5.7") by 400 mm (15.7"). It has three 8 mm T-slots. The X-axis travel is approximately 330 mm (13") and the Y-axis travel is approximately 130 mm (5.1"). The table is 124 mm (4.9") tall (the hand wheel is higher). The table base is 353 mm (13.9") deep and 216 mm (8.5") wide. The dials are graduated in 0.001" and one turn of the hand wheels moves the table ". The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes Drawbar, 3MT x 3/8"-16, Mini Mill $9.95 This replaces the original 12M metric drawbar with a 3/8" - 16 thread. 4" long when measured like a bolt 3/8"-16 thread This drawbar fits the Grizzly G8689 and the Micro-Mark mini mills with the 3 Morse taper spindle, and is for use with collets and end mill holders with 3/8-16 NC thread. These drawbars are custom made for LittleMachineShop.com. *NOTE*: this is not the original drawbar for these machines. If you are looking to replace the original see item Drawbar, 3MT x M12, Mini Mill 1638 Drawbar, R8 1-Piece, Mini Mill $ Hand Wheel, Mini Mill, Cast Iron $34.95 Cast iron with chrome plated finish Revolving handle 10 mm bore with a 4 mm keyway This attactive hand wheel is cast iron with a polished, chrome plated rim and handle.get two to equip your mini mill on the X- and Y-axes.This hand wheel is 4" (102 mm) in diameter and has a 10 mm bore with a 4 mm keyway Power Feed, HiTorque Mini Mill $ Fits large-table mini mills Clutch disengages power feed when not in use Adjustable limit switches restrict travel V 50-60Hz Power table feed for the HiTorque and other large-table mini mills. This power feed mounts on the left end of the mini mill's table and drives the X-axis feed screw. It is variable speed (0 to 20 inches per minute). The power feed takes about 20 minutes to install. It is a bolt-on accessory for the HiTorque Mini Mill and requires no modifications to the machine. The power feed works on V 50-60Hz power. It has a computer-style (IEC C3/C4) power cord that unplugs from the power supply unit. This makes it easy to adapt for other countries. The furnished power cord has a North American (NEMA 5-15P) wall plug Power Feed, X3 & SX3 Mills $ Riser, 2" Solid Column $39.95 Adds 2" (50 mm) to the head space For solid column mini mills Includes proper mounting hardware This riser block mounts between the base and the column, adding 50 mm (2") to the head room on the mini mill. Mill: Mini Mill (X2) Assemblies 4785 Spindle Lock, Mini Mill $ Makes tool changes easier, faster, and more convenient When engaged, the plunger automatically drops into the locking hole as the spindle is rotated An electro-magnetic interlock disables power to the motor when the spring plunger is engaged Frees both hands for changing tools Loosen and tighten keyless chucks with one hand The spindle brake provides a fixed position for inserting the locking pin and frees both hands for changing tools.fits SIEG X2 millsdoes not work with the Mini Mill Belt Drive Kit Work Stop, Small Universal $9.95 Rigid stop for small milling machines Made of hardened steel Column is 0.47" diameter and 3.94" tall Base is 1.57" wide, 2.76" long and 0.47" thick Rod is 0.375" diameter and 6" long Use this work stop with vises, angle plates, jigs, and so on. It is the perfect size for 3" and 4" vises Work Stop, Universal 1766 Mini Mill Column Assembly $ This is the complete column assembly for the mini mill Mini Mill Head Assembly, R8 Spindle $ This is the complete head assembly for the mini mill. It includes the motor, motor controls, spindle housing and spindle. In short, it includes everything that travels up and down the column. This mini mill head assembly has an R8 spindle. The motor controller is a PWM variable speed controller with overload protection and a zero-speed start interlock. Motor: 350 Watt (0.47 HP) Low speed: RPM High speed: RPM Drilling capacity: 1/2" End milling capacity: 5/8" Face milling capacity: 1-1/8" Power: 120V, 60 Hz 1912 Mini Mill Head Assembly, 3MT Spindle $ Mini Mill Head Assembly, 3MT Spindle $ Mini Mill Head Assembly, R8 Spindle 230V $ Mini Mill Head Assembly, R8 Spindle, $ HiTorque R8 spindle No gears in spindle drive Most low-speed torque in its class Most powerful mill in its class This is the complete head assembly for the HiTorque mini mill. It includes the motor, motor controls, spindle housing and spindle. In short, it includes everything that travels up and down the column. This mini mill head assembly has an R8 spindle. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class. Drilling capacity: 1/2" End milling capacity: 5/8" Face milling capacity: 1-1/8" Power: 120V, 60 Hz Page 49

50 Mill: Mini Mill (X2) Assemblies 3677 Mini Mill Large Table Assembly $ % more travel in both directions 50% more table area Unbolt the column from your existing X-Y table and bolt it to this one. Great for the Grizzly G0516 This is a complete X-Y table assembly for a mini mill. The table is 120 mm (4.73") by 460 mm (18.11"). It has three 12 mm T-slots. The X-axis travel is 300 mm (11.8") and the Y-axis travel is 130 mm (5.1"). The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050". The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes. This is all you need to make a mini mill using the milling column from a Grizzly G0516 Combo Lathe with Milling Attachment Mini Mill Large Table Assembly, Solid $ Column Base 30% more travel in both directions 50% more table area Bolt pattern for solid column attachment (P/N 4307) This is a complete X-Y table assembly for a mini mill.the table is 120 mm (4.73") by 460 mm (18.11"). It has three 12 mm T- slots.the X-axis travel is 300 mm (11.8") and the Y-axis travel is 130 mm (5.1"). The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050".The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.the column mounting bolt pattern consists of 4 M8 threaded holes spaced 135 mm x 50 mm Mini Mill Spindle Box Assembly, R8 $ This is the spindle box casting for the mini mill, along with all the internal parts. Included are: An R8 spindle with all the gears, bearings, spacers, and top nut that ride on it. The intermediate shaft with all the gears, bearings and such that ride on it. This includes the intermediate gear on the top of the shaft. The high/low speed shifting mechanism Mini Mill Spindle Box Assembly, 3MT $ Mini Mill Table Assembly $ This is the complete XY milling table assembly for a mini mill. The table is 90 mm (3.54") by 335 mm (13.19"). It has three 12 mm T-slots. The X-axis travel is approximately 8" and the Y-axis travel is approximately 4". The table is 136 mm (5.31") tall (the hand wheel and rear mount are higher). The table is 390 mm (15.4") deep and 460 mm (18.1") wide. The dials are graduated in 0.001" and one turn of the hand wheels moves the table ". The XY table assembly is made of cast iron and steel. There are adjustable gibs on both axes. This is all you need to make a mini mill using the milling column from a Grizzly G0516 Combo Lathe with Milling Attachment Variable Speed Drive Package $ Complete 250 W (1/3 HP) variable speed drive 120 V 60 Hz power RPM Forward and Reverse This is a complete variable speed motor and controller. Hook up the motor leads, plug it in and you have a 1/3 HP variable speed drive system. The motor is 83 mm in diameter. The body of the motor is 145 mm long. The motor shaft is 8 mm diameter with a 3 mm keyway and extends out 21.5 mm. There is a retaining ring groove near the end of the shaft. There are two M6 threaded holes in the side of the motor for mounting, our it can be end mounted with a motor mounting flange. Mill: Quick Change Tooling About the Tormach Tooling System Tool switching with the Tormach Tooling System (TTS) is extremely easy: Simply loosen the drawbar, slide out the current tool holder, then slip in the next and retighten. The unique geometry of the TTS tool holder ensures that, as the drawbar is tightened, the tool holder moves into an exact Z height while increasing rigidity. Each TTS holder has a shoulder that is undercut so it contacts the spindle itself, not the end of the collet. As the drawbar is tightened the collet will simultaneously squeeze the shank and be pulled upward into the spindle taper. This simultaneous action, grasping while moving up, pulls the tool holder tightly against the spindle face. The high-pressure contact between the shoulder of the tool holder and the spindle is the equivalent of a zero tolerance fit; the vertical location (Z-height) of the tool is exact. The initial placement, created by simply sliding the tool holder up until it stops, is normally within a few thousandths of an inch. The final location, after tightening the collet, is exact, highly repeatable, and not affected by the variable tension of the drawbar or wear on the collet Tool Height Setting Package, Tormach $ Tool Conversion Kit, Tormach TTS $ Arbor, Drill Chuck, Tormach TTS to 33JT $17.29 Quick change arbor for 1/2" drill chucks Minimal clearance height for tool change Repeatable tool positioning Hardened and precision ground Part of the Tormach Tooling System (TTS) this 33JT arbor is used for mounting standard keyed and keyless drill chucks Arbor, Drill Chuck, Tormach TTS to 2JT $ Arbor, Drill Chuck, Tormach TTS to JT1 $ Arbor, Drill Chuck, Tormach TTS to JT6 $ Boring Head Arbor, Tormach TTS $36.41 Quick change boring head shank with 7/8-20 thread Minimal clearance height for tool change Repeatable tool positioning Hardened and precision ground Part of the Tormach Tooling System (TTS) this boring head arbor fits to 7/8-20 UN F mounted hears or other tooling with the 7/8-20 thread Collet Holder, Tormach TTS, ER-20 $34.75 Quick change adapter for ER-20 collets Minimal clearance height for tool change Repeatable tool positioning Hardened and precision ground Part of the Tormach Tooling System (TTS) this ER collet holder is designed to hold industry standard (DIN 6499) self-extracting collets, size ER-20. ER20 collet holders can hold tools up to 1/2" in diameter. Ideal for any small milling or drilling operations Collet Holder, Tormach TTS, ER-16 $ Collet Holder, Tormach TTS, ER-32 $ Collet, Tormach TTS, R8, 3/4" $29.75 Special shortened R8 collet for TTS system Precision ground This precision ground R8 collet is shorter than a normal R8 collet to ensure that the TTS tool holder contacts the spindle Collet, Tormach TTS, 3MT, 3/4" $ Drill Chuck, Tormach TTS, 1/4" $ /4" Capacity drill chuck Mounted on Tormach Tooling System Arbor Minimal clearance height for tool change Repeatable tool positioning Hardened and precision ground 0-1/4" Capacity drill chuck and Tormach Tooling System Arbor. All working parts are hardened. Chuck key is included. Number 1 Jacobs taper mount. Page 50

51 Mill: Quick Change Tooling 2434 End Mill Holder, Tormach TTS, 3/8" $21.74 Quick change adapter for 3/8" shank end mills Minimal clearance height for tool change Repeatable tool positioning Hardened and precision ground Part of the Tormach Tooling System (TTS) this set screw hold is intended to be used with end mills that have a Weldon shank. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM Blank Tool Holder, Tormach TTS $ End Mill Holder, Tormach TTS, 1/2" $ End Mill Holder, Tormach TTS, 1/4" $ End Mill Holder, Tormach TTS, 10 mm $ End Mill Holder, Tormach TTS, 12 mm $ End Mill Holder, Tormach TTS, 5/16" $ End Mill Holder, Tormach TTS, 6 mm $ Passive Probe, Tormach $ For edge finding and digitizing The passive probe is an affordable option for occasional and hobby use. This probe uses a normally closed sensing logic and is suitable for edge finding, digitizing, and other basic probing procedures. Stylus is ground steel ball. It interfaces with the PCNC mill using a 5 pin DIN connector. Includes 10mm TTS lowprofile mount Shell Mill Arbor, 1/2", Tormach Quick $57.86 Change Compatible with shell mills designed for 1/2" R8 arbors. Works with 4121 Face Mill This is the TTS arbor used for the 4121 face mill Starter Set, CNC, Tormach TTS $ Complete set for CNC operations includes 15 tool holders Minimal clearance height for tool change Repeatable tool positioning All tool holders are hardened and precision ground Tool height presetting set included CNC operations work best with one holder for each tool in order to make use of the tool length compensation table in the CNC controller. This function also requires a system for measuring the mounted tools. The CNC set includes a total of 15 tool holders plus a tool measuring set. The Tormach Tool Assistant Set includes 8" digital height gauge (measurement accuracy +/ "), USB interface cable with touch trigger, manual, and Tool Assistant software.this is an outstanding value and a great way to get started with a CNC that has been retrofitted from a manual machine. If your CNC machine supports a tool offset table but you re not using it, then you re not realizing the full benefit of CNC machining Starter Set, CNC, Tormach TTS, Metric $ Starter Set, Manual, Tormach TTS $ Complete set for manual operations includes 4 tool holders Minimal clearance height for tool change Repeatable tool positioning All tool holders are hardened and precision ground You don t need a CNC to take advantage of the Tormach Tooling System. Manual operations benefit from quick change, reduced clearance, and increased rigidity. This is a basic set that will introduce users to all of those features. The manual mill operators set will improve productivity in manual milling SuperFly Cutter, Tormach TTS $ Adjustable to 3" (75mm) Cutting Diameter Includes tool bar for SEHT Insert 1.8" (46mm) Height TTS Fly Cutter Body with ATC Geometry Inserts sold separately This fly cutter kit has modern insert geometries and is specially designed for maximum performance on spindles with less than 3hp. Kit includes fly cutter body, tool bar, insert retaining screw and wrench (inserts sold separately). Like all Tormach TTS tools, the SuperFly Cutter has a 3/4" straight shank. Use it with the TTS system, or use it in any 3/4" collet. Tormach part number Insert, SEHT43AFFN-X83, Tormach $ Insert, SEHT43AFSN-X45, Tormach $ Screw, Insert Retaining, SEHT Inserts $ Wrench, ER-16 & ER-20, Deluxe Tormach $29.95 Set Includes (1) Box End wrench for retention nuts and (1) openend wrench for TTS arbors. Anodized Aluminum Alloy Slim Profile High Visibility Blue Color Laser Size Marking This set works for both ER-16 and ER-20 TTS holders as well as other ER-16 and ER-20 collet nuts and chucks Wrench, ER-32, Deluxe Tormach Set $29.95 Mill: Small Mill (X3/SX3) Accessories 4672 Quill Stop, X3 and SX3 Mills $ Quick and accurate way to set quill depth of cut Press the button and the nut disengages from the thread Slide to desired position and release the button to engage threads Turn the nut for micro-adjustments Set accurate and consistent depth of cut for repeated machining operations The Quill Stop provides a quick and accurate way to set the quill depth of cut. It is great for drilling multiple holes to the same depth. The Quill Stop is also very handy in performing single or repeated chamfering of parts. To set up the chamfer the first time on a part, turn the mill off and simply lower the cutter to the top of the part, lock the fine feed knob, and back-off one full turn (turn the Button Nut clockwise as viewed from the top). Then start the mill and turn the Button Nut on the Quill Stop counter clockwise in small increments until the cutter contacts the part. Then continue turning the Button Nut counterclockwise and alternately lowering the quill until the desired chamfer is achieved. The Quill Stop works equally well performing inside chamfers using typical chamfering mills, and outside chamfers using, for example, a hollow mill. Requires a slight modification to the mill (drill & tap 2, 1/4-20 holes in the side of the machine head) Spindle Lock, G0619 Mill $ Makes tool changes faster, more convenient, and safer Replaces the pin spanner wrench Fits the Grizzly G0619 (SX3) mill Tighten collet chucks with one hand Works with Tormach TTS quick change tooling system The Spindle Brake replaces the pin spanner wrench and makes tool changes fast, convenient, and safe Spindle Lock & Quill Stop, G0704 Mill $ Spindle Lock, G0463 Mill $ Spindle Lock, G0463 Mill, Flip Style $ Spindle Lock, G0619 Mill, Flip Style $ Spindle Lock, G0704 Mill $ Spindle Lock, G0720 Mill $ Page 51

52 Mill: Small Mill (X3/SX3) Accessories Mill: Tooling 4803 Spindle Spline Wrench $21.95 Manufactured from a single formed piece of steel Black oxide finish Fits X3 mills 25mm and 28mm splines This wrench perfectly engages the spindle spline enabling full control of spindle rotation during drawbar loosening or tightening operations. The spindle spline wrench solves the no spindle lock problem for many mills. The wrench has a black oxide finish and is 8.5 inches (216 mm) long. The Spindle Spline Wrench is a must-have tool for anyone who owns or operates an X3 milling machine or other large round column or square column mill Boring Head Shank, R8 $29.95 R8 Shank 7/8"-20 Mounting Thread Tapped for 7/16"-20 Drawbar Made of high grade tool steel Hardened and ground This boring head shank has an R8 taper on one end and a 7/8"-20 thread on the other. The boring head shank adapts our boring head to mills with an R8 spindle Boring Head Shank, 3MT $ Boring Head Shank, 1/2" Straight $ Boring Head Shank, 2MT $ Boring Head Shank, 3MT Professional $29.95 Grade 5401 Boring Head Shank, R8 Professional Grade $ Boring Head, 2" $ " boring head holds 1/2" shank boring bars The mill boring head offsets up to 5/8" Mounts on a shank with a 7/8"-20 thread Dial is graduated in 0.001" Bar holder moves freely and smoothly Two inch round boring head designed with superior rigidity for chatter-free boring and precise hole size accuracy. Ground and hardened adjusting screw is designed for long lasting, trouble free use Boring Head, 2" Professional $ " diameter boring head holds 1/2" shank boring bars The boring head offsets up to 5/8" Mounts on a shank with a 7/8"-20 thread Dial is graduated in 0.001" Boring bar holder moves freely and smoothly The design of this boring head assures superior rigidity for chatter free boring and precise hole accuracy. The adjusting screw is hardened and ground for long lasting trouble free use End Mill Holder Set, 2MT, 4-Piece $70.95 The 4-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, and 5/8 inches. This end mill holder set works with the Harbor Freight micro mill and other mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC End Mill Holder, 2MT, 1/2" $ End Mill Holder, 2MT, 3/16" $ End Mill Holder, 2MT, 3/8" $ End Mill Holder, 2MT, 5/8" $ End Mill Holder Set, 3MT, 5-Piece $ The 5-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches End Mill Holder Set, R8, 5-Piece $89.95 The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill.this end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle End Mill Holder, R8, 1/2" $ End Mill Holder, R8, 3/16" $ End Mill Holder, R8, 3/4" $ End Mill Holder, R8, 3/8" $ End Mill Holder, R8, 5/8" $ Fly Cutter Set $15.95 This is a set of three 1/2" shank fly cutters. The 3/4" body fly cutter uses a 3/16" tool bit. The 1-1/8" body fly cutter uses a 1/4" tool bit. The 1-3/8" body fly cutter uses a 5/16" tool bit. Fly cutter sets allow you to make fine finishes on large areas Fly Cutter Set with Tool Bits $ Fly Cutter, 3/8" Shank $21.95 Adjustable from 1-1/4" to 2-1/2" inch cuttng diameter Allen key for set screws 1-1/8" Height 3/8" Shank Includes 1/4" Left Hand tool bit This fly cutter has a 3/8" diameter and short profile making it ideal for ER-16 or 2MT spindles, but will also work wonderfully well on larger mills with R8 or 3MT spindles Indexing Spin Jig, 5C $64.95 This indexing spin jig is used on milling machines, grinders, and inspection equipment.the spindle is hardened and ground. The spindle accuracy is TIR. The indexing plate is precision ground.the spin index directly indexes in 10 degree steps. The vernier provides 1 degree increments.the centerline of the spin jig is about 2.75 above the base Mill Table $27.95 This is the mill table from a 3-in-1 machine. It is approximately 9.5" long, 4.25" wide and 1" thick. The mill table has 12 mm T-slots so it uses 7/16" T-slot nuts Tilting Table, 7" x 5" $ Tilts degrees with worm drive Graduated in degrees for quick setting Heavy duty casting with three 1/2" T-slots Overall height 3.75" Locks in any position 4991 T-Slot Cleaner, 7/16" T-Slot $1.95 Use this T-slot cleaner to clear the swarf from the T-slots on your mini mill and bench mill.made for LittleMachineShop.com specifically to fit the Mini Mill and Bench Mill T-Slot Cleaner, 5/8" T-Slot $1.49 This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC End Mill Holder, 3MT, 1/2" $ End Mill Holder, 3MT, 3/16" $ End Mill Holder, 3MT, 3/4" $ End Mill Holder, 3MT, 3/8" $ End Mill Holder, 3MT, 5/8" $25.95 Page 52

53 Models: Flywheels Models: Flywheels Flywheels from Martin Model Cast iron and bronze flywheels Highest quality made by Martin Model & Pattern Cast iron flywheels are fully annealed Castings are oversize to allow turning to the specified diameter All Martin Model & Pattern iron castings are fully annealed for easier machining. When molten iron is poured into a sand mold, it cools very quickly where it contacts the cold sand. Quick cooling being the formula for hardening iron, this results in a very hard surface, or skin, on the casting. It's commonly known that you must address this hard skin when you start machining a casting. But Martin Model castings go through another heat treat process. After the castings have cooled, they are once again heated to a high temperature, but this time they are cooled slowly. This ensures that the castings are evenly soft throughout, and that there is no hard skin on the surface Flywheel, 2" Diameter, 5 Heavyweight $20.95 Curved Spoke, Bronze 2761 Flywheel, 2" Diameter, 5 Heavyweight $15.95 Curved Spokes 2756 Flywheel, 3" Diameter, 6 Heavyweight $18.95 Straight Spoke 2782 Flywheel, 3" Diameter, 6 Heavyweight $27.95 Straight Spokes, Bronze 2755 Flywheel, 3" Diameter, 6 Straight Spokes $ Flywheel, 3" Diameter, 6 Straight Spokes, $27.95 Bronze 2757 Flywheel, 4" Diameter, 5 Straight Spokes $ Flywheel, 4-1/2" Diameter, 6 Curved $26.95 Spokes 2760 Flywheel, 4-1/2" Diameter, 6 Tapered $26.95 Spokes 4879 Flywheel, 2" Diameter, 5 Straight Spokes $ Flywheel, 2" Diameter, 5 Straight Spokes, $24.95 Bronze 4880 Flywheel, 2-1/2" Diameter, 6 Straight $18.95 Spokes 4881 Flywheel, 2-1/2" Diameter, 6 Straight $25.95 Spokes, Bronze Models: Fully Assembled and Kits 3137 British Toy Loco Material Kit $ Models: Plans 3136 Model Steam Mill Engine Material Kit $79.95 Working model of a steam mill engine Includes all the material and drawings you need to make this model You machine the parts CAD drawings and complete construction manual This is an operating model engine. This kit includes 35 pages of drawings and 32 pages of construction notes that are specific to the mini mill and mini lathe. When finished, the mill engine measures 2.79" wide x 4.54" long x 3.08" high. Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air Oscillating Steam Engine Material Kit $27.95 Includes all the materials you need Plus all the hardware to assemble the engine Complete plans are included Great first project for beginners This kit includes all the materials and hardware required to make the oscillating steam engine. This engine can be built with a small lathe (Sherline or larger) and a drill press. A small mill (Sherline or larger) makes it easier. You will need a source of compressed air, such as an air compressor, to run this engine Oscillating Steam Engine Material Kit and $49.95 Instructional DVD 2515 Buffalo Pup Steam Tug Boat Plans $29.95 Radio controlled 36" model tug boat runs on live steam Build the 2 cylinder steam engine from bar stock Build the copper boiler Build the boat, including propeller and rudder Install the radio control Complete plans to build a steam driven, radio controlled model of a tug boat. These plans were created by Bill Reichart. There are 30 pages of plans that cover building the boat including, building the boiler out of copper, and building the steam engine out of bar stock, and building the deck and cabin out of wood. The hull is fiberglass. Sources are provided for all purchased parts including propane, the ceramic burner, and the fiberglass hull. Working British toy loco steam engine Includes virtually all the material and drawings you need to make this engine* You machine the parts CAD drawings and complete construction manual This is an operating toy steam engine. This kit includes 65 pages of drawings and 60 pages of construction notes that are specific to the mini mill and mini lathe. When finished, the British toy loco measures 2.23" wide x 6.43" long x 3.72" high. If runs on 027 gage track which is 1.25" between the rails. Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air. * You must purchase one piece of brass basin drain tube from your hardware store Model Steam Launch Engine Material Kit $59.95 Working model of a steam launch boat engine Includes all the material and drawings you need to make this model You machine the parts CAD drawings and complete construction manual This is a working model engine kit. This Elderberry Steam Engine kit includes 15 pages of drawings and 32 pages of construction notes that are specific to the mini mill and mini lathe. When finished, the launch engine measures 2.00" wide x 2.93" long x 3.17" high. Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air. Precision: Calipers 1235 Dial Caliper, 6" $22.95 This 6" dial caliper has clear graduations every 0.001". It is made of hardened stainless steel for long life. It has a thumb wheel and a locking screw. The measuring faces are hardened, ground and lapped. The bezel can be rotated 360. You can make inside, outside, depth and step measurements. The dial caliper is furnished with a fitted case Dial Caliper, 6" Industrial Quality $29.95 Style and quality similar to Swiss-made calipers Clear graduations every 0.001" Hardened stainless steel bar, rack, gears, depth rod and measuring faces Knife-edge contacts for both inside and outside measurements Fine adjustment roller for one hand use This 6" Dial Caliper is made of hardened stainless steel for long life. It has a thumb wheel and a locking screw. The measuring faces are hardened, ground and lapped. The bezel can be rotated 360. You can make inside, outside, depth and step measurements. The dial caliper is furnished with a fitted case. Page 53

54 Precision: Calipers 4272 Dial Caliper, 6" Professional Grade $49.95 Z-Limit brand guarantees professional quality Clear graduations every 0.001", 0.100" per revolution Hardened stainless steel bar, rack, gears, depth rod and measuring faces Knife-edge contacts for both inside and outside measurements Fine adjustment roller for one hand use This 6 dial digital caliper is made and inspected in the same factory as some of America's best-known brands. The caliper is made of hardened stainless steel for long life. It is very smooth operating and shock resistant. It has a thumb wheel and a locking screw. The rack is screwed on. The measuring faces are hardened, ground and lapped. The bezel can be rotated 360. You can make inside, outside, depth and step measurements. The dial caliper is furnished with a durable fitted case Dial Caliper, 6", Starrett $ Starrett 6 white dial caliper and fitted case Starrett catalog number 120A-6 This is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is direct reading, reliable, and accurate. The Starrett 120 Series dial calipers are the only American made dial calipers on the market Dial Caliper, 6", Starrett $ Starrett 6 white dial caliper and fitted case Starrett catalog number Sharp, clear dial graduations of.001" with.100" per revolution Sharp, black graduations on the satin finished bar, every.100" This is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is direct reading, reliable, and accurate.with the ability to provide quick, accurate measurement of O.D., I.D. and depth, the dial caliper is the most versatile precision hand tool on the market.imported 1758 Electronic Digital Caliper, 6" $ " (150 mm) range " (0.01 mm) resolution 0.001" (0.02 mm) accuracy Reads inches or mm Four button model has display lock This 6" electronic digital caliper has manual power on and off. It won't go off and lose your measurement.there are four buttons (one more than most digital calipers).off/on: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH: Switches between inch and metric display.hold: Locks the display. Use this button when you take a measurement where you cannot easily see the display. Press HOLD again to unlock the display.you can make absolute or relative inside, outside, depth, and step measurements. Furnished with a fitted case Electronic Digital Caliper, 4" $ Electronic Digital Caliper, 6" $ " (0-150 mm) range " (0.01 mm) resolution 0.001" (0.02 mm) accuracy Reads inches or mm This 6" electronic digital caliper has manual power on and off.there are three buttons.off: Turns the power off Electronic Digital Caliper, 6" Fractions $ ", 150 mm range 1/64", ", 0.01 mm resolution 1/64", 0.001", 0.02 mm accuracy Reads fractions, inches or mm. Great for woodworkers This 6" electronic digital caliper has manual power on and off.there are three buttons.off/on: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.some fractional calipers read to 1/128". That's too fine a measure for use with wood, which expands and contracts more than that. These calipers read to 1/64", which is precise enough, without the bother of figuring out if 97/128" is larger or smaller than 3/4".Furnished with a fitted case Electronic Digital Caliper, 6" IP65 Stainless $ " (150 mm) range " (0.01 mm) resolution 0.001" (0.02 mm) accuracy Reads inches or mm IP65 level of protection against coolant, water, dirt and dust This 6" electronic digital caliper has a rugged stainless steel case to protect the electronics. The caliper has two buttons. One turns on the power and sets the readout to zero. The second switches between inch and metric display. The caliper turns itself off after a period of inactivity. It maintains its setting when the power is off. You can make absolute or relative inside, outside, depth, and step measurements. You can set it to zero at any position. According to IEC529, in IP65 the first number "6" identifies protection against ingress of dust and the second number "5" identifies protection against water jets projected by a nozzle from any direction for a duration of 3 minutes. Furnished with a fitted case Electronic Digital Caliper, 6" Professional $54.95 Grade Z-Limit brand guarantees professional quality Large, easy-to-read LCD display can be zeroed at any position Automatic shut-off after 5 minutes of non-use, last measuring position retained when shut off Hardened stainless steel body for long life, with fine adjustment thumb wheel Resolution is " (0.01mm) and linear accuracy meets DIN 862 standard This 6 electronic digital caliper is made and inspected in the same factory as some of America's best-known brands. The caliper measures four ways; outside, inside, depth, and step. The three keys are on/off, inch/mm, and zero. Jaw Depths: 1 1/2" outside, 5/8" inside. The CR-2032 battery is included. Includes a durable plastic case Electronic Digital Caliper, 6", Splash Proof $ " (0-150 mm) range " (0.01 mm) resolution Coolant spash-proof, dust-proof and chip-proof Max. measuring speed: 3.0m/s Body and measuring is hardened stainless steel Hardened stainless steel electronic caliper is coolant splashproof, dust-proof and chip-proof.switch power on/off keyswitchable inch/mmfloating zerocomes in a fitted casemeets DIN 862Battery included ON/ZERO: Turns the power on and sets the readout to zero at any position. MM/INCH: Switches between inch and metric display.you can make absolute or relative inside, outside, depth, and step measurements. Furnished with a fitted case Electronic Digital Caliper, 8" $39.95 Page 54

55 Precision: Calipers 4458 Electronic Digital Caliper, 6", Starrett 798 $ Large, easy-to-read LCD display IP67 level of protection against coolant, water, dirt and dust Hardened stainless steel measuring surface for long life Fine adjustment for precision measurements Resolution is.0005" (0.01 mm) Starrett 6 electronic digital caliper resists coolant, water, dirt and dust. Starrett catalog number 798A-6/150. The Starrett 798 electronic caliper provides an IP67 level of protection against foreign matter in hostile shop environments. In addition to being coolant and water resistant, the 798 also offers excellent protection against chips, dirt, dust, and other contaminants. The extra large LCD (character height.310") makes the 798 exceptionally easy to read. All 798 models also include an output port for RS232 equipped devices. While there are other IP67 electronic calipers available, only the 798 is a Starrett - for a century and a quarter, the tool of choice for the most experienced toolmakers and machinists when the measurements are most critical. According to IEC529, in IP67 the first number "6" identifies protection against ingress of dust and the second number "7" identifies submersion in water under standardized conditions of pressure for 30 minutes. With this caliper you can set zero at any position, read inches or millimeters, and lock the slide in position. There is a manual on/off button, plus the caliper turns itself off after thirty minutes of inactivity Electronic Digital Caliper, 6", Starrett 799 $ Large, easy-to-read LCD display can be zeroed at any position Automatic shut-off after 5 minutes of nonuse, last measuring position retained when shut off Hardened stainless steel body for long life Fine adjustment thumb wheel Resolution is.0005" (0.01mm) and linear accuracy meets DIN 862 standard Starrett 6 electronic digital caliper Starrett catalog number 799A-6/150 Starrett's 799 series electronic calipers are light, comfortable, easy to use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years. They have a slim, streamlined profile, function buttons for zero and inch/mm, a large, clear, easy-to-read LCD display, and long battery life. The 799 Calipers are furnished in a fitted, protective case. Jaw Depths: 1 1/2" outside, 5/8" inside. Precision: Edge and Center Finders 2747 Center Finder, Drill Press, PEC $14.95 Accurately and quickly locates center on cylindrical workpieces Satin chrome finish Place tool in drill chuck or collet and line up pointer with line scribed on shaft 3/8" diameter shank Drill press center finder made in the US by Products Engineering Corporation (PEC).The drill press center finder is a quick way to find the approximate center of cylindrical objects. Line the pointer up with the mark and the drill chuck is centered over the work Coaxial Centering Indicator $79.95 Use this indicator to quickly center work pieces or fixtures on your mill The indicator remains stationary while the spindle rotates Can be used to center internal and external diameters The locating accuracy is " of center Furnished in a fitted case Use this indicator to quickly center work pieces or fixtures on your mill.the measuring range is 0.25". The shank is 0.375" diameter and 0.75" long. The indicator is 5.5" long from the top of the shank to the bottom of the tip holder (the black part).can measure internal diameters from 0.12" to 4.25" and external diameters from zero to 4.25".This set includes: Indicator body, restraining rod (prevents rotation), springloaded center point feeler, three straight feelers (for IDs), three curved feelers (for ODs) Collet Adapter for Edge Finders, Starrett $24.00 Starrett catalog number PT28314 This is a time saving accessory for edge finders with a 3/8" shank. The collet adapter allows quick installation and removal of the edge finder, eliminating the need for collet changes on Bridgeports and similar machines. It can be used with any attachment with a 3/8" shank. The progressive steps are 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 1". Step depths vary from.100" to.200" Edge and Center Finder Set, 4 Piece $ piece Edge and Center Finder Set Accurately locates the starting point for all types of machine work and jig boring Hardened and ground all over Accuracy.0002" The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. Set includes: 1 double ended edge finder: Shank: 1/2", Tip diameter:.20/.50" 1 single ended edge finder: Shank: 3/8", Tip diameter:.200" 1 single ended edge finder: Shank: 1/2", Tip diameter:.500" 1 double ended edge and center finder: Shank: 1/2", Tip diameter:.200" 3793 Edge and Center Finder, Metric, Starrett $ Edge and Center Finder, Starrett $ Edge Finder, Starrett $ Edge and Center Finder $ Edge and Center Finder, Fisher $ Edge Finder 1/4" Audible, Fisher $ Edge Finder 3/8" Audible, Fisher $ Edge and Center Finder, Laser 3/8" Shank $ /8" shank fits collets and end mill holders 3.375" overall length Uses common SR44 batteries (included) Accuracy to 0.001" Includes polarizing attachment to adjust dot size The model /8 shank Laser Edge and Center Finder is a new tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use this laser edge finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. Our laser edge finder is easy to align so you can be sure it is always accurate. The batteries for the model /8 shank Laser Edge and Center Finder last for over 3 hours of continuous operation. That's 6 months to a year of normal use Edge and Center Finder, Laser 1/2" Shank $ Edge and Center Finder, Laser 1/4" Shank $ Edge and Center Finder, Laser 10 mm $ Shank 2623 Edge and Center Finder, Laser 6 mm $ Shank 2679 Edge and Center Finder, Wet Cabinet $ Laser 1/2" 2886 Polarizing Attachment for Laser Edge $27.95 Finder 2887 Magnetic Holder for Laser Edge Finder $11.50 Page 55

56 Precision: Edge and Center Finders 3965 Edge and Center Finder, Laser 3/8" Shank $ AC Powered 3/8" shank fits collets and end mill holders 3.375" overall length AC Powered 110 to 240 VAC Accuracy to 0.001" Includes polarizing attachment to adjust dot size The Laser Center/Edge Finder is a new tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate Edge and Center Finder, Laser 3/8" Shank $ Concentric Circles 3/8" shank fits collets and end mill holders 3.375" overall length Uses common SR44 batteries (included) Accuracy to 0.001" Includes polarizing attachment to adjust line width The Laser Center/Edge Finder is a tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. This Laser Center/Edge Finder projects a series of concentric rings, making it easy to center over an existing hole. See the pattern on the Chris' Tips tab. The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate. The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use Edge and Center Finder, Laser 1/4" Shank $ Concentric Circles 4629 Edge and Center Finder, Laser 3/8" Shank $ Crosshair 3/8" shank fits collets and end mill holders 3.375" overall length Uses common SR44 batteries (included) Accuracy to 0.001" Includes polarizing attachment to adjust to normal dot The Laser Center/Edge Finder is a tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. This Laser Center/Edge Finder projects a crosshair, making it easy to align a workpiece on the table. The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate. The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use. Precision: Indicators 2294 Wiggler Center Finder Set $22.95 Collet chuck and 4 probes Includes needle point, 0.250" ball, 0.100" disk, and 0.250"- shank indicator holder Made in USA This wiggler center finder set comes with a collet chuck and 4 probes for finding centers, edges, and indicating. Each probe snaps into the body without removing the collet nut.the wiggler shank is 0.375" diameter Wiggler Center Finder Set 2278 Wiggler Center Finder Set, Starrett $37.00 Starrett Wiggler Center Finder. Starrett catalog number S828. The wiggler center finder and three different attachments adapt to countless applications and are readily interchangeable. The attachments are snapped in the chuck without removing the collet nut and are clamped by a ball swivel-joint, which permits adjustment to an angular position or true concentricity. With the pointed shank, working centers can be quickly and accurately located. Spring tension on the ball of the point permits guiding the point to true concentricity so that the work can be brought into perfect alignment with the machine spindle. The ball contact is useful in locating work by first bringing the contact (ball diameter 0.250" or 6.3 mm) against the work, a slot, hole, shoulder, or end, and indexing the work to the desired position relative to the spindle. The disc contact, which has a small disc at the end (0.100"/2.5 mm) diameter, permits use in more confined areas such as slots or shallow holes. The wiggler shank is 0.375" diameter Wiggler Center Finder, Starrett $23.00 Starrett Wiggler Center Finder. Starrett catalog number 828A. The wiggler center finder and pointed shank quickly and accurately locates working centers. Spring tension on the ball of the point permits guiding the point to true concentricity so that the work can be brought into perfect alignment with the machine spindle. The attachment is snapped in the chuck without removing the collet nut and is clamped by a ball swivel-joint, which permits adjustment to an angular position or true concentricity Dial Indicator, 0.25" x 0.001", Small Face $ " dial indicator with 0.001" resolution AGD Group I for tight locations 1.5" Diameter face, 0.375" shank, #4-48 tip thread Rack & contact point made of hardened stainless steel Jeweled movement This 1/4" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case Dial Indicator, 1" x 0.001" $ " dial indicator with 0.001" resolution AGD Group " Diameter face, 0.375" shank, #4-48 tip thread Lug back mounting screws: #2-56 thread This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case Dial Indicator, 1" x " $ Dial Indicator, 2" x 0.001" $ Point Set, Dial Indicator $ Magnetic Back for Dial Indicator $ Edge Finder, Electronic $24.95 Lights up when it contacts the edge of the work Repeatable to " Works on any conductive metal Includes LED light and battery Made in USA This electronic edge finder has a 1/2" shank. It is 4" long overall. Page 56

57 Precision: Indicators 4281 Dial Indicator, 1" x 0.001", Professional $49.95 Grade, Shock Resistant Z-Limit brand guarantees professional quality 0-1" dial indicator with 0.001" resolution 6 jewel shock resistant movement 2.25" dial diameter AGD Group 2 with 0.375" shank and flat back Calibration certificate included This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". The thread for the tip is #4-48. Includes a durable plastic case. This indicator is made and inspected in the same factory as some of Europe's best-known brands Dial Indicator, 0.25" x 0.001", $39.95 Professional Grade, Shock Resistant 4282 Dial Indicator, 0.5" x ", $49.95 Professional Grade, Shock Resistant 4112 Dial Indicator, 1" x 0.001", Professional $29.95 Grade 4283 Dial Indicator, 10 mm x 0.01 mm, $49.95 Professional Grade, Shock Resistant 4284 Dial Indicator, 5 mm x 0.01 mm, $42.95 Professional Grade, Shock Resistant 1835 Dial Indicator, 1", Starrett $ Range: 1.000" Face diameter: 2-1/4" Graduations: 0.001" Shockless, hardened steel gear train and jewel bearings Lug on center of the back Starrett catalog number J. These indicators have a shockless, hardened steel gear train and jewel bearings. They are furnished with a lug on the center of the back. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread Dial Indicator, Starrett Last Word $ Starrett dial indicator with universal friction holder with shank Graduation: " Range: 0.030" Dial Reading: Starrett catalog number 711LPSZ. Steel Contact Point Length: 5/32" (4 mm) Steel Contact Point Ball Diameter: 0.120" (3 mm) These handy test indicators are among the most versatile available. Their small size and variety of attachments handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator always knows where he is Dial Test Indicator Set, 0.3" x " $ " Dial Test Indicator Set with.0005" Graduation Three dovetail positioning mounts work with most existing test indicator accessories Precision gear-driven design with smooth jeweled movement Frictionally adjustable contacts High contrast easy to read dials with a white background Includes 2 contact points, 2 dovetail clamps, 1 swivel post holder, 1 tool post holder and 1 contact wrench in a fitted case. Manufactured and inspected at world class factory that produces highest quality European brands. Contact point reverses automatically to maintain clockwise hand rotation. Meets or exceeds ANSI/ASME accuracy specifications. Narrow body for in reach ability, and a satin chrome finish for durability. Interchangeable with 3808AC Dial Test Indicator, x " $29.95 Dial test indicator with " graduations Range is " in either direction Reading Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point 7 Jewel movement, Comes in a fitted case Test Dial Indicator for sale with graduations and reading from Comes in a fitted case Dial Test Indicator, x " and $66.95 Universal Magnetic Base 2875 Dial Test Indicator, x " $ Replacement Point, Dial Test Indicator $ Dial Test Indicator, x ", $84.95 Interapid Style Dial test indicator with " graduations Range is 0.030" in either direction Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point Dial test indicator comes in a fitted case Jeweled movement This Swiss-type horizontal dial indicator has a large 1.5" dial Dial Test Indicator, x ", $ Dovetail Mount, Starrett Starrett dial test indicator with dovetail mount Starrett catalog number 708AZ Dial test indicator with " graduations Range is 0.010" These precision test indicators were designed to be positioned for easy and accurate readability. The versatility of the angled head, combined with the three dovetail mounts eliminates the need for having both vertical and horizontal style test indicators. These are the features that make this series of test indicators superior to ordinary types. Angled head for better reading position Large 1 3/8" (35mm) dial diameter Precision gear-driven design with smooth, jeweled movement Meet or exceed ISO accuracy specification For extreme accuracy we recommend positioning the lever contact so that it is approximately 15 from being horizontal with the workpiece. Three dovetail positioning mounts work with existing test indicator accessories Inch reading indicators are available with easy-to-read, shaded white, solid red, or solid black dials - millimeter reading indicators with solid yellow dials Contact point reverses automatically, always maintaining clockwise hand rotation Narrow body for inreach ability Satin chrome finish for durability Long carbide contacts 13/16" (20mm) are furnished as standard. Contacts are frictionally adjustable and replaceable 3168 Dial Test Indicator, x ", $ Starrett Starrett dial test indicator with attachments Starrett catalog number 708ACZ Range is 0.005" in either direction Precision gear-driven design with smooth, jeweled movement Dial test indicator comes in a fitted case These precision test indicators were designed to be positioned for easy and accurate readability. The versatility of the angled head, combined with the three dovetail mounts eliminates the need for having both vertical and horizontal style test indicators. Includes a dovetail body clamp, tool post holder, swivel post snug with dovetail indicator clamp, and a snug and rod unit. For extreme accuracy we recommend positioning the lever contact so that it is approximately 15 from being horizontal with the workpiece Page 57

58 Precision: Indicators 2876 Electronic Digital Indicator, 0.5" $46.95 Measurement range is 0-0.5" Resolution is ", accuracy is " Measures in inches or mm Set to zero at any position There are three buttons; OFF for power, ZERO/ON to zero the display, and IN/MM to switch between inches and millimeters. The indicator turns on automatically when the plunger moves.pressing ZERO/ON zeros the indicator at any position so you can make comparative readings between two parts Electronic Digital Indicator, 0.5", Starrett $ Starrett 0.5" digital electronic AGD Group 2 indicator Starrett catalog number Range.500" (12.7mm) Resolution.0005" (.01mm) Reverse travel (± control indicates direction) This electronic digital indicator features a large, easy to read LCD display.you can set zero at any position and change the direction that shows positive dimensions.the indicator has a 3/8" shank and the tip thread is #4-48. The case has a mounting lug on the back Electronic Digital Indicator, 0.5", Starrett $72.95 Style 0.5" digital electronic AGD Group 2 indicator Range.500" (12.7mm) Resolution.0005" (.01mm) Reverse travel (± control indicates direction) True inch/mm conversion This electronic digital indicator features a large, easy to read LCD display. You can set zero at any position and change the direction that shows positive dimensions. The indicator has a 3/8" shank and the tip thread is #4-48. The case has a mounting lug on the back. Front battery cover allows easy access to change battery. Extra large LCD display. Absolute zero reset button. Zero at any point. On/Off button. Flat Back with Lug Back included Battery included: SR44, 1.55V. Supplied with fitted case Electronic Digital Indicator, 1" $59.95 Measurement range is 0-1" Resolution is ", accuracy is " Measures in inches or mm Set to zero at any position Relative and absolute measurement This is an AGD Group 2 indicator with a 0.375" diameter shank and a #4-48 thread for tips.there are three buttons; ON/OFF for power, RESET to zero the display, and R/A to switch between absolute and relative measurement. Pressing R/A zeros the indicator at any position so you can make comparative readings between two parts. The absolute measurement is not lost, and is displayed by pressing R/A again Electronic Digital Indicator, 1", Quick $59.95 Action 1" digital electronic AGD Group 2 indicator Range 0-1" (0-25mm) Resolution.0005" (.01mm) Excellent repeatability with quick movement of measurements True Inch/MM conversion Absolute zero reset button. Lug Back and on/off button. Comes with a fitted case Indicator Back, Dial Indicator, Flat $0.95 Fits 2.25" dial diameter AGD Group 2 indicators Four hole pattern Precision: Layout 4715 Indicator Mount $7.95 Rigid steel construction Dovetail groove for clamping test indicators Holds 5/32" & 3/8" shank indicators 1/4" post hole This item works great with the 4648 magnetic base 5375 Point Set With Ring, 22 Piece Set $ Points 4-48 Screw Threads Fit AGD Indicators Premium quality Aluminum Ring for easy storage and easy selection Ring inclues 22 points with 4-48 screw threads that fit AGD indicators. All points are mounted on a convenient aluminum ring for safe keeping and ready selection Universal Back-Plunger Dial Indicator, $ Starrett Starrett Back-Plunger Dial Indicator Starrett catalog number 196A1Z with 3 contact points, adapter, 4 attachments in case Accurate and reliable Rugged, with few moving parts The Starrett No. 196 Indicator is one of the most versatile indicators available, and it is the "granddaddy" of them all. Over the years this tool has been improved by methods and materials but the basic design is unchanged. The design is older than most of you and has withstood the test of time and beaten all challengers because it is:accurate and reliablesimple to operaterugged, with few moving partssmooth in operationinexpensive - the best indicator value you can buythis indicator with graduations to.001" will handle by far the majority of jobs. Shank diameter is 1/4" (6.3 mm). For full use, first choose the proper contact from the three hardened contact points that are included. Then the contact is brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation Combination Square Set, 12" $ " stainless steel blade with graduations of 8ths, 16ths, 32nds, and 64ths Includes square head, center head, and protractor head This 4-Piece combination square set features a stainless steel blade, and includes a square head, a center head, and a protractor Combination Square Set, 12", PEC $ Combination square with 12" machinist's blade, square/miter head, protractor head, and center head Easy to read satin chrome finish blade is fully hardened and tempered 4R graduations, 8ths & 16ths, 32nds & 64ths. Protractor graduated degrees in both directions Heads have hammertone powder-coat finish Square/miter head includes level vial and hardened scribe tool Combination square made in the US by Products Engineering Corporation (PEC) Combination Square Set, 12", Starrett $ Starrett 12" combination square set Includes square head, center head and reversible protractor head Starrett catalog number C R Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths The combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180 protractor scale, hardened steel, photoengraved blade. Cast iron heads with black wrinkle finish. The blade is 1" wide and 3/32" thick and has a satin chrome finish. Page 58

59 Precision: Layout 1839 Combination Square, 12", Starrett $77.00 Starrett 12" combination square with square head Starrett catalog number 11H-12-4R Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths The square has a reversible lock bolt, scriber, spirit level, and hardened steel, photoengraved blade with regular finish. Cast iron head with black wrinkle finish. The blade is 1" wide and 3/32" thick Combination Square, 4", Starrett $ Double Square, 4", Starrett $65.00 Starrett 4" double square with graduated blade Starrett catalog number 13A Popular with machinists, toolmakers, and patternmakers The sliding blade is adjustable making it more practical for a wide variety of uses than a common square with fixed blade. The faces of the head are ground square Double Square, 6", Starrett $ Double Square, 6", PEC $44.95 Double square with 6" blade Easy to read satin chrome finish blade is fully hardened and tempered 4R graduations, 8ths & 16ths, 32nds & 64ths Head has hammertone powder-coat finish Double square made in the US by Products Engineering Corporation (PEC) DYKEM Hi-Spot Blue $8.95 Non-drying Non-hardening Transfers from surface to surface Saves time in surface scraping work 0.55 Oz. Hi-Spot is an intensely blue, soft, smooth uniform paste that can be spread to an extremely thin layer easily and evenly. It is typically used to show high spots on bearings and when making close fitting parts. The film remains pliable and transferable for months DYKEM Steel Blue Layout Fluid $ Oz. container Brush in cap Provides a thin blue film without cracking or chipping Toluene free Must be shipped by ground; not available outside the continental US Machinists depend on Dykem Steel Blue Layout Fluids to scribe sharp, clear, precise lines. When applied, the layout fluid provide a uniform deep blue color that prevents glare and dries in minutes. Dykem Layout Fluid creates an extremely thin film which adds practically no thickness to the work piece and remains flexible without cracking and chipping Layout & Marking Kit $14.95 Scriber with 2-3/8 Point, Starrett Sharpie Magnum Permanent Marker, Black Sharpie Metallic Fine Point Permanent Marker The big, fat Sharpie Magnum King Size in this kit is a great substitute for layout dye. It marks on virtually any surface, provides an opaque covering to scribe, and doesn't dry out in the can. Not to mention that it avoids all the hassle and limitations of shipping and using hazardous layout dyes. The Starrett scriber has been the industry standard for many years. The Sharpie Metallic marker can be used on dark materials where contrast is needed. It is also great for identifying materials in your steel rack Machinist Square Set $49.95 Machinist square set includes 2", 3", 4" and 6" squares Made from fully seasoned and hardened tool steel Accurate right angles both inside and outside Beams are ground and lapped Class H accuracy: " " per inch 2742 Machinist Square Set, PEC $63.95 Includes 2", 3", 4" and 6" squares Made from high quality tool steel True right angles inside and outside Beams and blades are precision ground Blade is hardened Machinist squares made in the US by Products Engineering Corporation (PEC).Length of blade is measured from inner edge of beam to end of blade.these squares are square within " over the length of the blade. The two sides of the blades and beams are parallel within " over their length Optical Center Punch $99.95 Accuracy to 0.002" A center dot and circle target the punch location Magnifies without distortion or parallax Includes sturdy storage case Even less experienced machinists can punch layout points to within 0.002" using this high power piloted center punch system. The optical center punch is located over a scribed workpiece and adjusted until centered using the optics. The optical pilot is then removed and replaced by the punch. A tap marks the spot Precision Machinists Level, 12", Starrett $ Starrett machinist's improved level Starrett catalog number Ground and graduated main vials Cross test vial and plumb vial 0.005" per foot (0.42 mm per meter) accuracy These Starrett Machinist Levels have ground and graduated main vials, and a cross test vial. The 12" level also has a plumb vial. These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage. The base of the precision machinists level features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting. With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work. The main level vials have graduations that are approximately seconds or.005" per foot (0.42 mm per meter). There are five, six, or seven lines on each side of the bubble, depending on the base length. Starrett Machinist Levels are the finest levels available, used for precision work that is typically required in industry. They all have these features: All level bases are made from the finest quality seasoned cast iron and are precision-machined on the reference surface. Nonmachined surfaces have an attractive, black wrinkle finish. An involute longitudinal groove between the bearing flats for accurate seating on round work. This groove has a special involute design, permitting better centering and greater capacity to handle larger rounds. Groove and bearing flats are machined together for maximum accuracy Case, Precision Machinists Level, 12", $36.30 Starrett 2427 Precision Machinists Level, 18" and Case, $ Starrett 2425 Precision Machinists Level, 18", Starrett $ Precision Machinists Level, 4", Starrett $ Precision Machinists Level, 6", Starrett $ Precision Machinists Level, 8", Starrett $ Scriber with 2-3/8" Point, Starrett $11.00 Starrett hand scriber. Starrett catalog number 70A. The 1/4" diameter handle is of steel, knurled, and nickel plated. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon head prevents rolling. The scriber point is shipped reversed in the handle so the point is protected Scriber with 2-7/8" Point, Starrett $13.50 Page 59

60 Precision: Layout 3885 Scriber with Two Tips, Starrett $28.50 Tempered well-finished steel Points are finely tapered Nickel plated knurled handle Scribers are steel, properly tempered and well finished. The points are finely tapered so that the scriber point can be easily seen on the work. The handle, as well as the points, has a knurled grip. The length of the scriber is 9" (225mm). Points screw into the handle and fit either end. The knurled handle is nickel-plated Sharpie Fine Point Permanent Marker, $0.99 Black The original pen style permanent marker Permanent on most surfaces Quick-drying ink Fade and water resistant Marks on plastic, metal, cardboard, vinyl, leather and glass This is the original Sharpie marker. It has many uses around the shop, including using it as layout fluid Sharpie Metallic Fine Point Permanent $1.95 Marker 3607 Sharpie King Size Permanent Marker, $ Square, 6" Toolmakers, Starrett $ Starrett toolmaker's grade stainless steel square Starrett catalog number Blade length 5 29/32" Beam length 3 29/32" Squareness accuracy to.0002" (0.005mm) for every 6" (150mm) These high quality toolmaker's squares feature hardened, ground, and lapped stainless steel construction on both the blade and the beam. The beam is machined at the inner corner for clearance Square, 3" Toolmakers, Starrett $ Square, 4" Toolmakers, Starrett $ Surface Gage $22.95 For scribing lines, use on a surface plate Includes 4" and 7" spindles Bottom V-groove ground for cylindrical work Retractable pins in base for working on flat surfaces Fine adjustment 3068 Surface Plate 9"x12" $32.95 Black granite for long term stability Grade B: ± accuracy Meets federal specification GGG-P-463C These surface plates are checked with an auto-collimator for overall accuracy. All points on the surface are between two parallel planes " apart Transfer Punch Set 3/32" to 1/2" $ piece transfer punch set Sizes from 3/32" to 1/2" by 1/64" plus a 17/32" punch Heat treated and tempered tool steel for long life Transfer punches are " undersize These transfer punches are 4-7/8" long and have a black oxide finish. The set Includes an indexed stand. The punches are 3/32" to 1/2" diameter in increments of 1/64", plus a 17/32" punch. Transfer Screw Sets Includes 6 transfer screws in a wrench/holder Transfer exact location of threaded holes Works with blind holes 3079 Transfer Screw Set, 1/4"-20 Thread $ Transfer Screw Set, 5/16"-18 Thread $ Transfer Screw Set, 3/8"-16 Thread $ Transfer Screw Set, 1/2"-13 Thread $ Transfer Screw Set, M4 Thread $ Transfer Screw Set, M5 Thread $ Transfer Screw Set, M6 Thread $ Transfer Screw Set, M8 Thread $ Transfer Screw Set, M10 Thread $12.95 Precision: Measuring 3609 Uni-Paint Valve Action Paint Marker, Black $2.95 Quick drying, Acid Free Marks opaque and glossy on light or dark surfaces just like paint Fade-Proof, Water-Proof Must be shipped by ground; not available outside the continental US Marks on virtually any surface; glass, metal, wood, rubber, stone, plastic, paper, vinyl, leather, felt, canvas and more Uni-Paint Valve Action Paint Marker, White $ Universal Bevel, PEC $25.50 Six inch long blade Set to any angle Stainless steel Made in USA This high-accuracy T-bevel features both straight slots and offset slots in the blade and straight slots in the stock. This combination allows for the widest possible variety of adjustments. Align the T-bevel with the angle you want to duplicate, then tighten the knurled locking nut Universal Bevel, Starrett $ Starrett Universal Bevel Starrett catalog number 47 Wide variety of adjustment and angle settings Blade is 6" (150 mm) long This improved Universal Bevel has both offset and straight slots in the blade, in combination with straight slots in the stock that allow for a wide variety of adjustment and angle settings that are impossible to obtain with many ordinary bevels. Length of the blade is 6" (150 mm), and the stock, 3-1/2" (90 mm). The stock lies flat on the work or paper since the head of the clamping bolt is recessed. This tool can be set to duplicate an angle from a master, or it may be easily converted into a Bevel Protractor by using this tool with the No. 193 Protractor (PN 1833) Angle Gage Set $29.95 Set of 18 angle gages 5 to 90 by 5 increments Satin chrome finish Eight gaging surfaces on each gage Check primary angle, 1/2 primary and complementary angles The angle gage set is furnished in a vinyl case for storage Angle Gage, Digital $ /-180 Degree Range Auto Off conserves battery life 0.1 Degree Resolution Compact and Lightweight design with ±0.1 Degree Repeatability Magnetic Disk Base This small device is great for setup or checking angles. It is accurate and reliable and the magnetic base makes for easy angle checking on a work piece, angle vise or sine vise, and whatever else you can dream up BoltSize-It Bolt and Nut Checker $4.95 Sizes bolts, nuts, and screws Sorts coarse threads, fine threads, and metric threads Size bolt diameter by pushing bolt through sizing holes Gauges hex nuts and washers (USS, SAE) Gauges metric hex nuts and washers by holding under metric holes Measure US and metric thread pitch Special notch gauges flat headed metal and wood screws Ruler marked with inches and millimeters Sturdy and lightweight plastic resists water, alcohol, oil, and grease Fits in shirt pocket (8-5/8" x 3-1/4" or 217 mm x 82 mm) Page 60

61 Precision: Measuring 3708 Bore Gage Set, 2-6" Dial $89.95 Measure ID of holes from 2" to 6" in diameter Close tolerance measurement of ID, taper and roundness Furnished with AGD Group II dial indicator Accuracy: " Includes fitted case and interchangeable anvils This dial bore gage is easy to calibrate with a ring gage or micrometer Caliper, 6" Outside Spring $9.95 Easy Adjustment Over Entire Range Centrally Located Adjustment Screw Balanced Legs, Uniform Tension Polished Natural Steel Finish 3618 Caliper, 6" Inside Spring $ Caliper, 6" Hermaphrodite $ Divider, 6" Spring $ Center Gage, 60 Degree, PEC $9.95 Made of high quality steel Satin chrome finish Use for grinding and setting thread cutting tools Gaging surfaces are precision ground Center gage made in the US by Products Engineering Corporation (PEC).Used for grinding and setting screw cutting tools. Scales with 14ths and 20ths graduations provided on one side, 24ths and 32nds on reverse side. Scales are used to determine number of threads per inch. Gage also features a table of double depths of thread for selecting size of tap drills. Made of hardened spring tempered steel, with a protective satin chrome finish. All gaging surfaces are precision ground Center Gage, Acme, PEC $ Center Gage, 60 Degree, Starrett $24.00 Starrett 60 degree center gage Starrett catalog number C391 Extremely handy for use in grinding and setting thread cutting tools These gages meet the following standards: American National or U.S. 60, Whitworth or English 55, and Metric 60. They also have a very useful scale for finding the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds of an inch. The gage also has a table of double depths of threads for determining size of tap drills Comparator Stand & Indicator $44.95 Fine vertical adjustment with lock 6" x 6" granite base flat within " 1" Diameter column, 8" tall Includes a 0-1" x 0.001" dial indicator This granite dial gage comparator stand will accept any AGD 1, 2, 3, or 4 dial indicator Depth Base for 6" Caliper $15.95 Slot Width:.64" 1.5 x 4 x 1.5 inches Z-Limit brand guarantees professional quality 3546 Depth Gage, 6" Combination, Starrett $68.00 Starrett 6" combination gage, 32nds/64ths Starrett catalog number 236 Combination depth gage and protractor This depth gage has an added feature permitting its use as a protractor for measuring angles. It is a simple, handy tool that is a welcome addition to any machinist's tool box. The head is graduated both left and right to 30, 45, and 60 degrees. The rule can be set to any of these angles by swinging the rule until the line on the turret coincides with the desired angle Head is made of hardened steel, ground, and nicely polished 2 5/8" (66mm) long and 1/8" (3mm) wide One side of the base is cut out to permit easier and more accurate readings The center of the head is recessed so that the tool will lay flat to permit more accurate measurements A tempered rule that has been accurately machined divided, is smoothly fitted to the head and can be locked in position by a knurled nut 3547 Depth Gage, 6" Steel Rule, Starrett $50.00 Starrett steel rule depth gage, 0-6" range, 32nds/64ths Starrett catalog number 237 These very handy depth gages can be used to quickly obtain measurements in 64th of an inch by simply adjusting the rule to the required depth. The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule. The rule is Starrett No. 610N. The gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut The base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements 3460 Drill Gage $4.95 1/16" to 1/2" fractional size drill gage Quickly check drill sizes Sturdy and lightweight plastic resists water, alcohol, oil, and grease.fits in shirt pocket (3-3/8" x 7-9/16" or 86 mm x 193 mm) 3552 Drill Gage, A-Z Drill Sizes, Starrett $72.00 Starrett Standard Letter Size Drill Gage, A-Z range Starrett catalog number 198 Letter size drills can be quickly and conveniently checked with this gage. Twenty-six holes are provided, giving corresponding drill sizes from "A" through "Z" with decimal equivalents from.234" diameter through.413" diameter. The gage is approximately 5/64" thick by 2 5/16" wide and 6 1/4" long, is hardened and has a satin finish. Thoroughly tested after hardening Drill Gage, Jobbers, 1/16-1/2", Starrett $67.00 Starrett Jobbers' Drill Gage, 1/16-1/2" Range Starrett catalog number 187 Using this gage, the size of any twist drill from 1/16-1/2" by 64ths can be quickly determined. The gage has a total of 29 holes, each marked with the drill size in inches and the decimal equivalent. Gage is rigidly tested after hardening and has a black matte finish. Gage information is steel stamped on one side and white marked on the reverse side for quick, clear reading. Approximately 5/64" thick by 2 5/16" by 6 1/4" long. Page 61

62 Precision: Measuring 3557 Drill Point Gage, Starrett $60.00 Starrett Drill Point Gage, 59 bevel, 32nds graduations Starrett catalog number 22C The head is beveled to 59 (the correct drill point angle) Graduated in 32nds along the 59 face for measuring the drill lips This gage was designed specifically for use in drill grinding. It provides a quick, accurate way for determining the correct drill point angle of 59 and the correct length of drill lips necessary for clean-cut drilling at maximum feeds and speeds. The sliding head may be adjusted to any position along the rule and locked by a thumb nut. The head is beveled to 59 (the correct drill point angle), and is also graduated in 32nds along the 59 face for measuring the drill lips which should be of equal lengths. The hook rule has accurate, machine-divided graduations in 8ths, 16ths, quick-reading 32nds and 64ths. Hook is adjustable and can be shortened or extended on either side of the rule, and may also be removed if desired. Tool can also be used as a plain rule, hook rule, depth gage, and slide caliper. The No. 22D Head-only will fit all steel rules 3/4" wide by 3/64" thick 3092 Height Gage, 12", Dial $89.95 Stainless steel with satin chrome finish Carbide tipped scriber for longer life Fine feed adjustment Positive lock screw 0.001" Graduations 3181 Height Gage, 6", Digital, Starrett $ Starrett 0-6" (0-150 mm) range digital height gage Starrett catalog number 3751AZ-6/150 Easy-to-read LCD with.32" high characters Linear Accuracy: 0.001" (0.02mm) Resolution:.0005" (0.01mm) Rounded nose scriber cuts clean, sharp lineseasy-to-read LCD with.32" high charactersthis digital height gage features Inchmillimeter conversion & zero at any position. It has a manual ON/OFF button but will also turn off automatically after 5 minutes of inactivity. The stainless steel bar is hardened for long life. The scriber can reference zero from the base bottom. It also has a slide lock & fine adjustment thumb roll, plus it features a hardened, ground, and lapped base Height Gage, Digital, 8", Tormach $ " Digital Height Gauge 0.001" graduations Easy to read LCD screen This is a stainless steel dial height gauge with 0.001" graduations Indicator Holder, 1/4" Round Shank $ /4" Straight 3" overall length For use with test indicators and probes with dovetails Locks in 90 increments Great for aligning a vise or setting up a work piece Machinists Measurement Kit $54.95 Includes a dial caliper, micrometer, square, and a steel rule 0-1" carbide-tipped micrometer with " graduations 4" bevel square is ground and lapped for accurate straightness and parallelism 6" 4R stainless steel rule 2880 Magnetic Base Indicator Holder $ Magnetic Base Indicator Holder $13.95 Magnetic base indicator holder with fine adjustment Permanent magnet has an 60 kg (130 lb) holding force On/off switch makes it easy to position V-groove base allows you to mount it on cylindrical surfaces This magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The V- groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 60 kg (130 lb) holding force Magnetic Base Indicator Holder, Fine $69.95 Adjustment Unique top fine adjustment mechanism 3-D rigid aluminum arm movement Dovetail groove for test indicator Maximum reach is 10.7" On/Off switch Magnetic base indicator holder with fine adjustment mechanism on the top of the base. Magnet has 176 lbs of pull. Base is 60 x 50 x 55mm Magnetic Base Indicator Holder, Fine $56.95 Adjustment, Mini 3714 Magnetic Base Indicator Holder, $24.95 Professional Grade Z-Limit brand guarantees professional quality Magnetic base indicator holder with fine adjustment Permanent magnet has an 65 kg (145 lb) holding force On/off switch makes it easy to position V-groove base allows you to mount it on cylindrical surfaces This magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The V-groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 66 kg (145 lb) holding force Magnetic Base Indicator Holder, Starrett $ Starrett Magnetic Base with Attachments Starrett catalog number 657AA Powerfull magnetic base holds firmly to steel and iron surfaces Push button turns magnet on or off for quick, one-hand set-up For use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers Magnetic Base Indicator Holder, Starrett $ Magnetic base with triple-jointed arm and fine adjustment Starrett catalog number 660 Positive On/Off switch Very sensitive fine-adjustment thumb screw The compact and versatile No. 660 Magnetic Base Indicator Holder has three adjustable pivots controlled by a single knob for fast, easy indicator positioning. Small but powerful magnetic base, with 70 lbs. (320 N) holding force.base Dimensions: 1 3/16 x 1 9/16 x 1 3/8" (30 x 40 x 35mm)Horizontal and vertical mounting positionswill hold any indicator with a 3/8" (9.5mm) stem or standard dovetail mountarticulating arm with powerful central locking knob provides full 360 horizontal positioning and over 180 vertical positioningmaximum horizontal reach: 4.750" (120mm)Maximum vertical reach: 7.500" (190mm) 3072 Magnetic Test Indicator Holder, Fisher $67.00 Overall height 3.75" Powerful permanent magnet Clamps on dovetail, 5/32", or 1/4" diameter stems Includes stem adapter and mill adapter Magnetic base indicator holder with one-knob lock Permanent magnet has an 80 kg (176 lb) holding force On/off switch makes it easy to position V-groove base allows you to mount it on cylindrical surfaces This magnetic indicator holder locks all its joints when the knob is tightened.the on/off switch makes it easy to position. The V- groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 80 kg (176 lb) holding force.the lower arm is 110 mm long, the upper arm is 100 mm long Magnetic Base Indicator Holder, Mini $29.95 Page 62

63 Precision: Measuring 1248 Micrometer Set, 0-3" $59.95 This 0-3" micrometer set features carbide faces and clear " graduations on a satin-chrome finish. The frames are forged steel. 1" and 2" standards are included, as well as adjusting wrenches. The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the barrel. The micrometers come in a fitted case Micrometer Set, 0-75 mm Metric $ Micrometer, 0-1" $ Micrometer Set, 0-6" $ Solid metal C-shape frame for all sizes Graduation: Hardened and precision ground anvil spindle thread with microlap finish on ends This 0-6" micrometer set features carbide faces and clear " graduations on a satin-chrome finish. The frames are forged steel. 1" through 5" standards are included, as well as adjusting wrenches. The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the barrel. The micrometers come in a fitted case Micrometer, 0-1" Digital, Starrett $ Starrett 0-1" Electronic Digital Micrometer Starrett catalog number 3732XFL-1 Starrett Digital Micrometer Action Features: ON/OFF button - also automatic OFF after 30 minutes of nonuse. Instant inch/millimeter conversion. Measurement HOLD button. Ability to zero tool at any position. Readability Features: Large, right-sized, high-contrast LCD digital readout is easy to read and reduces errors. Conventional inch or millimeter graduations standard. Attractive no-glare black wrinkle finish on the frame. Starrett no-glare satin chrome finish on thimble and sleeve. Ease-of-Handling Features: Balanced frame design for comfortable and accurate measuring. Ring-type knurled lock nut for quick and sure locking. Smooth friction thimble for uniform pressure. Gracefully designed tapered frame for use in narrow slots and tight places. Accuracy and Long-Life Features: Extremely hard and stable onepiece spindle (the heart of our accuracy). Micro-lapped carbide measuring faces. Starrett designed electronic microprocessor. One battery furnished for dependable power and over one year s normal usage. Automatic OFF after 30 minutes of nonuse. Starrett workmanship Micrometer, 0-1", Starrett $ Starrett 0-1" micrometer Starrett catalog number T230XRL Accurate to " This is the jewel of precision micrometers used by skilled workmen worldwide. The spindle and anvil are sized at.235" (6mm) to reach places most micrometers cannot reach. The balanced frame and thimble design insure easy handling and better readability. A ring-type knurled lock nut provides quick and sure locking. The combination ratchet and speeder provides uniform pressure and quicker adjustment. A gracefully designed tapered frame allows use in narrow slots and tight places. The micrometer has a rigid one-piece frame of drop forged steel and an extremely hard and stable one-piece spindle (the heart of the accuracy). It features micro-lapped measuring faces, quick and easy adjustment, plus Starrett workmanship Micrometer, Digital $ Measurement range is 0-1" Resolution is " Protected from dust and water to IP54 per IEC529 standard Large LCD display Rugged plastic case This digital electronic micrometer with carbide measuring faces has a resolution of ". There are three buttons; ON/OFF, SET to zero the display, and ABS/INC to switch between absolute and incremental measurement. The micrometer turns itself off after about 5 minutes of inactivity. Pressing ABS/INC zeros the micrometer at any position so you can make comparative readings between two parts. The absolute measurement is not lost, and is displayed by pressing ABS/INC again. The IP54 code says that dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety, and water splashed against the device from any direction shall have no harmful effects Pee Dee Thread Measuring Wires, Fisher $30.95 Made in USA by Fisher Machine Shop This set of thread measuring wires includes 48 wires of 16 different diameters for the three wire thread measuring procedure.you can measure threads from 3 to 48 threads per inch, and metric threads from 0.5 mm to 6 mm pitch. You can also measure Acme threads from 3 to 16 threads per inch.the thread measuring wires come with thread charts and are furnished with a quality vinyl case.this is a quality Americanmade product from Fisher Machine Shop. These are the original Pee Dee brand thread measuring wires Pin Gage Set, 0.061" to 0.250" Minus $ " long pin gages Each pin is up to " under the marked size Hardened to Rc Finished to 10 microinches Furnished in a sturdy plastic case with sizes marked These pin gages provide one of the best ways of measuring hole diameters. They can also be used to measure the distance between holes and for go/no go gaging. This set includes 190 pin gages, one for each 0.001" from 0.061" to 0.250". Each of the pin gages are individually marked with their respective sizes Pin Gage Set, 0.011" to 0.060" Minus $ Protractor, Rectangular Head, Starrett $79.00 Starrett steel protractor (0-180 ), 6" blade, rectangular head Starrett catalog number C183 Double graduations from in two directions The blade can be locked firmly at any angle by the lock nut Satin chrome finish for ease of reading and resistance to rust This is a highly useful and accurate tool for setting bevels, transferring angles, small squaring tasks, checking cutter clearances within certain limits, and many other applications. Double graduations from in opposite directions permit the direct reading of angles and supplementary angles. The back of the tool is flat for ease of use Protractor, Round Head, PEC $26.50 Measures angles from 0 to 180 Semi-circular head is 3.3" x 2" 6" arm can be locked in any position with knurled lock nut Made of tempered steel with satin chrome finish Protractor made in the US by Products Engineering Corporation (PEC).Protractors are used for drawing radial lines, transferring angles, setting bevels, and setting tapers Protractor, Rectangular Head, PEC $ Protractor, Round Head $ Radius Gage Set $21.95 Set of 25 radius gages and holder 1/64" to 17/64" radius by 64ths 9/32" to 1/2" by 32nds Satin chrome finish Five gaging surfaces on each gage for both concave and convex radii The radius gage set is furnished in a vinyl case for storage. Page 63

64 Precision: Measuring 1842 Radius Gage Set, Starrett $ Starrett 25 piece radius gage set Starrett catalog number S167CHZ Radii Range: 1/64-17/64" 9/32-1/2" Increments: 64ths, 32nds Radii or fillets can be checked or laid out easier, faster, and more accurately with Starrett radius gages. Each set is furnished in an attractive case which provides complete protection and easy, instant selection of the right gage size for the job. Gage Features: Made of satin finish stainless steel - rust and stain resistant. Each gage is clearly marked with its radius. Each gage has five different gaging surfaces for both convex and concave radii. All gages have precision finished radii with extra smooth, accurate edges. Gage Holder Features: Any gage can be used with the Starrett No. 110 holder which is especially useful for checking radii in confined or hard-to-reach locations. Two slots are provided in the holder permitting gages to be held at 30 or 45, either square in the slot or tipped to one side. The holder is 4" (100 mm) long, providing good reach and balance Screw Checker, Inch, PEC $19.95 #1 to 5/16" thread sizes Quickly identify unified and American threads NC, NF, and NS threads Made in USA Screw checkers provide a quick way to measure standard threads. They provide all the information you need for screws; diameter, length, threads per inch, hole size and even tap drill sizes Screw Checker, Large Metric, PEC $ Screw Checker, Small Metric, PEC $ Screw Checker, Plastic $4.95 #0 to 3/4" coarse & fine threads 1.6 mm to 16mm metric threads Tap drill sizes on back Sturdy and lightweight plastic resists water, alcohol, oil, and grease.fits in shirt pocket (3-3/8" x 6-5/8" or 86 mm x 168 mm) 3176 Screw Pitch Gage, Inch 51 Leaves, Starrett $80.00 Starrett screw pitch gage with 51 leaves Starrett catalog number 472 Measures 60 threads from 4 threads per inch to 84 threads per inch Starrett screw pitch gages are among the most useful tools in any mechanic's toolbox. They quickly determine the pitch of various threads. These gages consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf. Starrett screw pitch gages are available in a wide range of sizes with different numbers of leaves in various pitch ranges with which to gage. The screw pitch gage features a locking device at both ends of the case, so leaves can be securely locked in position for use. Leaves have a special narrow design, permitting checking internal threads in nuts, etc., as well as external threads Screw Pitch Gage, Inch 30 Leaves, Starrett $ Screw Pitch Gage, Metric 28 Leaves, $43.00 Starrett 5192 Screw Pitch Gage, Inch, 51 Leaves Leaves protected in sturdy steel case. Pitch number is marked on each blade. Thread Range: 4-84 TPI 60 Degree 3" Narrow blade design permits use for internal and external screw threads. Correct pitch is determined by matching blade teeth with threads. Each blade clearly marked with proper thread size. Blades are protected in sturdy steel case Screw Pitch Gage, Acme Inch, 15 Leaves $ Screw Pitch Gage, Inch, 28 Leaves $ Screw Pitch Gage, Inch, PEC $42.95 Screw pitch gage with 51 leaves. Measures 60 threads from 4 threads per inch to 84 threads per inch Narrow blades permit use for internal and external screw threads Each blade clearly marked with thread size Blades are protected in sturdy steel case Locking device secures all blades for storage or positions an individual blade for use Screw pitch gage made in the US by Products Engineering Corporation (PEC).The correct pitch is determined by engaging the blade teeth with the threads you are measuring.this screw pitch gage measures the following screw pitches: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, and 84 threads per inch Screw Pitch Gage, Inch/Metric PEC $ Screw Pitch Gage, Metric, PEC $ Small Hole Gage Set, 4-Piece $ small hole gages with 0.125" to 0.500" range Full spherical ball for very accurate measurements Hardened, satin-chrome plated measuring faces Furnished in plastic pouch 4492 Small Hole Gage Set, 4-Piece, PEC $ small hole gages with 0.125" to 0.500" range Extra long for gaging deep holes and slots Hardened, satin-chrome finish Furnished in fitted vinyl case Size adjustment by knurled knob 3545 Small Hole Gage Set, 4-Piece, Starrett $ Starrett 4- piece small hole gage set Starrett catalog number S829EZ Range of " ( mm) Hardened-ball measuring surface with two-point contact Smooth, sensitive adjustment for better feel, giving more accurate measurements These small hole gages are well balanced tools that are ideal for accurately measuring small holes, slots, grooves, and recesses in all kinds of work. The radius on each gage is less than the minimum diameter to be measured, which provides the two-point contact necessary for maximum accuracy. They have smooth, sensitive adjustment for better feel, giving more accurate measurements. The adjustment of the gage beyond their range is restricted by a safety stop that prevents breakage Accurate measurements are obtained by slightly "rocking" these gages in the hole to be measured. This will guarantee contact at the true diameter. The final size is then obtained by measuring over the ball contacts with a micrometer. Furnished in a vinyl pouch Steel Rule, 6" $5.95 4R graduations, 8ths & 16ths, 32nds & 64ths Hardened stainless steel This precision, 6" long steel rule is flexible to fit into tight spots. The etched black graduations are easy to read against the nonglare finish. Page 64

65 Precision: Measuring Steel Rules, PEC Made from the finest quality steel available Fully hardened and tempered with stain chrome finish Precisely etched, then black filled for readability Flexible rules are 1/2" wide and 0.015" thick Rigid rules are 3/4" wide and 0.040" thick 4610 Steel Hook Rule, 12" 32nds/ 0.5mm, PEC $ Steel Rule, 12" 4R Flexible, PEC $ Steel Rule, 12" 4R Rigid, PEC $ Steel Rule, 12" 5R Flexible, PEC $ Steel Rule, 150 mm / 6" Flexible, PEC 2736 Steel Rule, 150 mm / 6" Rigid, PEC 5092 Steel Rule, 300 mm Metric Flexible, PEC $ Steel Rule, 300 mm Metric Rigid, PEC $ Steel Rule, 6" 4R Black Flexible, PEC $ Steel Rule, 6" 4R Flexible, PEC 2734 Steel Rule, 6" 4R Rigid, PEC 2731 Steel Rule, 6" 5R Flexible, PEC $11.50 Steel Rules, Starrett Starrett precision steel rules are machine-divided, not photoengraved. They are inspected to Starrett Master Standards, which are traceable to the National Institute of Standards and Technology. Graduation No. 4R are 8ths, 16ths, quick-reading 32nds and 64ths. Graduation No. 16R are Quick-reading 32nds and 64ths, aircraft quick-reading 50ths and 100ths. Graduation No. 5R are quick-reading 10ths, aircraft quickreading 100ths, 32nds and 64ths. Graduations No. 31 are 32nds and 64ths on one side; mm and 1/2 mm on reverse. Flexible rules are 1/2" wide and 1/64" thick. Rigid rules are 3/4" wide and 3/64" thick Steel Rule, 12" 5R Flexible, Starrett $ Steel Rule, 150 mm 31 Flexible, Starrett $ Steel Rule, 6" 4R Flexible, Starrett $ Steel Rule, 6" 5R Flexible, Starrett $ Steel Rule, 6" 4R Rigid, Starrett $ Tap and Drill Gage, Starrett "Time Saver" $71.00 Starrett hardened tap and drill gage Starrett catalog number 185 Drill sizes number 1-60 ( ") This highly useful gage shows at a glance the correct size tap drill for any common size machine screw tap in "NF" National Fine or "NC" National Coarse Thread Series, that will leave the right amount of stock for approximately 65% full thread. The gage also shows the correct body size drill to use. In addition, there are 60 holes marked with the number size and decimal equivalent of the drill that fits each hole. Example: a size 2-56 tap (No. 2 tap with 56 pitch) calls for a No. 50 tap drill and a No. 44 body drill. The gage has a black matte finish with information steel stamped on one side and white marked on the reverse side for quick, clear reading. The gage is thoroughly tested for accuracy after hardening. Approximate size, 5/64" thick by 2 5/16" wide by 6 1/4" long Telescoping Gage Set, 4-Piece, PEC $69.95 For measuring holes, slots and recesses Measures holes from 5/16" to 2 1/8" diameter Double action is self-centering Satin chrome finish Contact ends are hardened and ground Use telescoping gages to measure ID, deep holes, recesses, slots, grooves, and other hard to reach places.measure the actual size or lock the self-centering plungers to a known size for a gono go gage.the photo shows the 6-piece set. This set has the smaller 4 gages Telescoping Gage Set, 6-Piece, PEC $ Telescoping Gage Set, 4-Piece, Starrett $ Starrett telescoping gage set Starrett catalog number S579GZ Range: Four gages, 5/16" to 2-1/8" Starrett telescoping gages are used for determining the true size of holes, slots, and recesses up to 2-1/8" (54 mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. These tools must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. The No. 579 Series telescoping gages have handles that are rigidly attached to the contact plungers and are automatically self-centering. Also, the No. 579 gages have two telescoping contacts. The handles are approximately 2-3/8" (60 mm) long. Constant spring tension gives uniform contact pressure and both plungers are easily locked at any desired setting Telescoping Gage Set, 6-Piece, Starrett $ Telescoping Gage Set, 6-Piece $14.95 For measuring holes, slots and recesses Measures holes from 5/16" to 6" diameter Double action is self-centering Satin chrome finish Contact ends are hardened and ground to the radius of the smallest diameter 3771 Test Indicator Holder, Professional Grade $19.95 Z-Limit brand guarantees professional quality Clamping diameter range of 1-3/8" to 2" Length from the center of the clamp to the indicator can be up to 6-1/2" Clamps to the outside of an end mill holder and does not disturb the working tool This test indicator holder has a clamping diameter of 1-3/8". The length from the center of the clamp to the indicator can be up to 6-1/2". The test indicator clamps to the outside of an end mill holder and does not disturb the working tool Test Indicator Holder, Universal $29.95 Designed to hold dovetailed test indicators or 1/4" straight shanks 3 different clamping dimensions: 1/4", 3/8" & 1/2" for various collet sizes reaches anywhere within a 8" diameter and fine-adjusts approximately 3/8" Setting up a workpiece before machining, aligning the center of a round workpiece in relation to the cutting head, or aligning vise jaws to the spindle takes virtually no time this test indicator holder Thickness Gage Assortment, Starrett $ " long by 1/2" Wide 0.001" through 0.030" thick Finest tempered steel with rounded edges for ease of use Marked every 6" with thickness with 3/16" hole for hanging Starrett catalog number S667A Starrett thickness gage or feeler stock assortment This set consists of one each of 32 different pieces, 1/2" wide x 12" long from 0 001" through 0 030" thick. The gages have rounded ends and rounded edges to make the gages easier to work with. They are marked every 6" with the thickness and have a convenient 3/16" (5mm) hole punched in the end for hanging. These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Page 65

66 Precision: Measuring Precision: Sets 1843 Thickness Gage Set, Starrett $68.00 Starrett thickness gage set (feeler gage) Starrett catalog number 66T. 26 Tapered Leaves, 1/2-1/4 x 3-1/32" Range " Leaf Thickness (Inches):.0015,.002,.0025,.003,.004,.005,.006,.007,.008,.009,.010,.012,.013,.014,.015,.016,.017,.018,.019,.020,.021,.022,.023,.024,.025 These gages are used in automotive, aviation, diesel, and farm equipment manufacture and service, and also in jig, fixture, gage, and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, and gaging narrow slots. Leaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thickness Locking device on most gages - permits securely locking one or more leaves in position Leaves easily removed or replaced Rugged, substantial steel case protects leaves 4521 Universal Arm for Indicators $26.95 Rigid universal steel arm with central locking mechanism 8 mm indicator stem hole and dovetail grooves holds most dial indicators and test indicators 11" arm length fine adjustment knob 4653 Universal Arm for Indicators, Mini $ Dial Indicator, Magnetic Base & Point Set $ " dial indicator with 0.001" resolution Magnetic base indicator holder with fine adjustment 22 piece indicator point set All in a plastic case This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread. The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v- groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case Dial Indicator and Magnetic Base $ Plastic Case for Magnetic Base and Dial $7.95 Indicator 2925 Dial Indicator, Test Indicator, Magnetic $59.95 Base & Point Set 0-1" dial indicator with 0.001" resolution dial test indicator with " resolution Magnetic base indicator holder with fine adjustment 22 piece indicator point set All in a plastic case The 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread.the dial test indicator has " graduations and a 7 jewel movement. Its range is 0.030" in either direction. Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point.the magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case. Precision: Setup 2518 Inspection Kit, 6-Piece $ " Dial indicator, magnetic base and point set Dial test indicator 0-1" micrometer 6" Dial caliper Plastic case This set includes all the basic precision measuring tools. The micrometer has a range of 0-1" and a resolution of ". An adjustment wrench is included. The dial caliper has a range of 0-6" and a resolution of 0.001". The dial test indicator has a range of 0.030" in either direction and a resolution of ". It includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and a 0.080" diameter point. The dial indicator has a range of 0-1" and a resolution of 0.001". Each revolution is 0.100", indicated by the revolution counter. There is a mounting lug on the back of the case. The magnetic base has on on-off switch for the magnet and incorporates a fine adjustment feature. The point set includes 22 of the most popular points. All have #4-48 threads for use in AGD 1, 2, 3, and 4 indicators Inspection Kit, Digital, 2 Piece $ " Electronic Digital Micrometer, " resolution, " accuracy 0-6" Electronic Digital Caliper, " resolution, 0.001" accuracy Large high contrast LCD displays There are three buttons on the micrometer and caliper; ON/OFF for power, ZERO to zero the display, and INCH/MM to switch between display of inches and mm.the micrometer has carbidetipped measuring faces and a spindle lock.the caliper body is hardened stainless steel and will take inside, outside, and depth & step measurments Measurement Starter Kit with Digital $49.95 Caliper 6" electronic digital caliper 6" steel rule 1" x 0.001" stroke dial indicator Magnetic base indicator holder Starrett Tools & Rules for Precision Measuring booklet This kit includes the basic measurement tools you need for the mini mill, mini lathe or other small machines. The magnetic base includes a fine adjustment Measurement Starter Kit with Dial Caliper $ Adjustable Parallel Set $31.95 Made of precision ground tool steel Easily expanded to size in openings for quick reference measurements Lock desired size by set screws provided Exact size can be set with micrometer Furnished in fitted plastic case with size range markings Six piece adjustable parallel set. Parallels are adjustable to the following sizes: 3/8-1/2, 1/2-11/16, 11/16-15/16, 15/16-1-5/16, 1-5/ /4, 1-3/4-2-1/4. The parallels are 5" long and 1/4" thick Angle Block Set $29.95 Simple, quick angle set ups Manufactured of hardened, stabilized and ground steel Accurate to ± per inch Fitted case Angle blocks are 3" long and 0.25" thick Ten piece angle block set. The angles included are 1, 2, 3, 4, 5, 10, 15, 20, 25, 30. You can combine them to make any integral angle Angle Plate, 3" Slotted & Webbed $ " long, 2.5" tall, and 2" wide Accurately machined and ground square and parallel on outside and ends Slots provide many options for mounting widely used for machining, layout and inspection High tensile cast iron is properly seasoned to prevent distortion 3432 Angle Plate, 4-1/2" Slotted & Webbed $21.95 Page 66

67 Precision: Setup 5385 Angle Plate, 3" Webbed End $ " long, 3" tall, and 3" wide Precision ground finishing: Square and parallel to.0005" per 6" on two working surfaces Webbed end Made from high tensile cast iron normalized and stress relieved 5384 Angle Plate, 2" Webbed End 5386 Angle Plate, 4" Webbed End $ Blocks, $12.95 Threaded holes are 3/8"-16 thread Through holes are 5/16" These precision blocks are ground and case hardened on all sides to Rc. The blocks are 1" by 2" by 3". They are parallel within ", flat within " and square within ". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC Blocks, $ Blocks, 1-2-3, Ultra Precision $29.95 Threaded holes are 3/8"-16 thread Through holes are 5/16" These ultra precision blocks are ground and case hardened on all sides to Rc. They are parallel within ", flat within " and square within ". They are up to " oversize for lapping. Each set includes two matched blocks. The blocks have 23 holes through them. Five are threaded 3/8-16 NC, and the other through holes are 5/16" diameter. The set includes a matched pair of blocks, five 3/8-16 x 1.5" socket head cap screws and a hex wrench. Furnished in a fitted case Center It V-Block $18.95 CENTER IT makes it easy to drill round stock and tubing Bolts to the drill press table and enables the drilling of round pieces parallel and centered Grooves on the outer sides eliminate slippage while holding by hand for sawing Place CENTER IT on the drill press table, run the stationary bit down to center the fixture CENTER IT is a tool for drilling pipe and other round objects. CENTER IT is made specifically for use in a drill press. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching required. If tubing is too large to drill in a single operation it can simply be turned over. Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise" grip ridges allow no-clamp holding of round stock for sawing and cutting. CENTER IT is made of heavy aluminum extrusion. CENTER IT is 5" Long, 4" Wide, and 1-3/4" High. The groove at the base of the V is 0.43" wide, so use a drill bit smaller than this to center the CENTER IT Gage Block Set, Rectangular, 81 Pieces $ No. of Blocks - 81pc Made of the highest quality tool steel Surface hardness: HRC 64 Grade AS-2 (B) (+/- 50 millionth) With fitted wooden case with sizes labeled Blocks Included: 9 Blocks:.1001" thru.1009" step of.0001", 49 Blocks:.101" thru.149" step of.001", 19 Blocks:.050" thru.950" step of.050", 4 Blocks: 1.000" thru 4.000" step of 1.000". Meets or exceeds Federal GGG-G-15C. All calibration conforms to:mil-std 45662A, GGG-G-15C, ISO/IEC Accredited, ISO 9000, , ANSI-NCSL Z540-1, ISO GUIDE 25 Certified. Complete with manufacturer's calibration or certificate Indicator Holder, 3/8" Square Shank $13.95 Holds dovetail indicators 3/8" & 7/32" mounting holes for holding the stem of almost all dial indicators 4" long 3/8" sqaure shank makes this great for use in a lathe Easily center work in a 4-jaw chuck by using this indicator holder in your tool post or standard turning tool holder holder for a quick change tool post with almost any indicator Machinists Jack 1.57" to 2.17" Height Range Acme threads Durable Steel Construction 1.5" body diameter These litte screw jacks are ideal for work piece setup in which fine adjustment may be required to level a work piece. They also make a suitable replacement for a step block when using a clamp kit Machinists Jack Set $15.95 Machinists jack Two extension bases Auxiliary pointed screw Inner and outer V bases 1" diameter, 1.5" to 2.3" tall Machinists jacks are used to support odd sized or odd shaped objects. Use them to support the ends of long workpieces that extend beyond your vise jaws. Use them to support the edges of items that you are clamping with your clamping kit. The machinist's jack includes lots of parts that you can mix and match to meet your needs Sine Bar, 5" $39.95 Working face accurate to " per inch of length 5.00" center distance of rolls accurate to " Use a sine bar and space blocks to set or measure extremely accurate angles Sine Bar, 2.5", Fisher $ Thin Parallel Shims, 3" Long, 3 Pairs $12.95 Shims are 9/64", 5/32" and 3/16" square and 3" long Made of high grade alloy steel hardened to 52 to 58 Rc Parallel within ". The pairs are matched in height within " These shims multiply the options for your 3" long thin parallels. You can now space your work by 1/64" Thin Parallels, 3" Long, 10 Pairs $29.95 Set of ten pairs of thin parallels in a fitted case Parallels are 1/8" thick and 3" long Heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" Made of high grade alloy steel hardened to 52 to 58 Rc Parallel within " on the top and bottom. The pairs are matched in height within " These 3" long thin parallels are great for the small vises used on the mini mill Thin Parallels, 1.5" Long, 9 Pairs $ Thin Parallels, 3" Long, 11 Pairs $ Thin Parallels, 3" Long, 4 Pairs $ Thin Parallels, 4" Long, 10 Pairs $ Thin Parallels, 5" Long, 10 Pairs $ Thin Parallels, 6" Long, 10 Pairs $29.95 Page 67

68 Precision: Setup Project Plans: CNC Conversions 2220 Thin Parallels, 3" Long, 10 Pairs, Ultra- $99.95 Precision Set of ten pairs of thin parallels in a fitted case Parallels are 1/8" thick and 3" long Heights are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16" Made of A2 tool steel hardened to 57 to 59 Rc Parallel within ±0.0001" on the top and bottom. The pairs are matched in height within ±0.0001" These 3" long thin parallels are great for the small vises used on the mini mill.these thin parallels were made in the USA by the Arthur R. Warner Co. exclusively for LittleMachineShop.com.This set of 1/8" thin parallels contains 10 pairs of parallels that step in 1/16" increments. This gives you more sizes you can use in our small vises. These parallels do not have holes in them.the Arthur R. Warner Co. is a familyowned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products Ultra Thin Parallels, 6" Long $29.95 Set of 20 pairs of ultra thin parallels in a fitted case Parallels are 1/32" thick and 6" long Heights are 1/2" to 1-11/16" in 1/16" steps Made of high grade alloy steel hardened to 50 Rc Parallel within " on the top and bottom. The pairs are matched in height within " The heights of the parallels are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8", and 1-11/16" V-Blocks, 1-1/4" x 1-1/4" x 1-5/8" $46.95 These precision V-blocks are made of hardened steel.they are ground square, parallel and concentric within ".The V- blocks are supplied in matched pairs.includes clamps for inspection work V-Blocks, 1-5/8" x 1-3/4" x 2-3/4" $ V-Blocks, Miniature 0.03" to 0.28" $99.95 Capacity Hold miniature round parts in these small V-blocks Bridges straddle long workpieces allowing use of hold-down screw of containing V-block Hardened and precision ground Square and parallel to " Includes fitted case These little V-blocks, held in larger V-blocks, provide a unique and universal way to hold small and intricate parts. Set includes two V-blocks, one with a 0.030" to 0.15" capacity and one with a 0.05" to 0.28" capacity. Also are two bridges and five upper prisms providing 1/8", 5/32", & 3/16" capacity Z-Axis Tool Height Setter, Professional $ Grade Set zero point quickly with built-in indicator Positioning accuracy and repeatability: " Dimensions: 2" square x 2" height With fitted wooden case Great for CNC machines 2395 Mini Lathe CNC Conversion Plans $49.95 Plans to add CNC to a mini lathe. These CNC conversion plans were created by Ronald J. Steele. This is a complete set of plans to add CNC to a mini lathe. They include a materials list with sources, plans for all the parts, and instructions for making the parts and installing them on the mini lathe. Changes to the original machine are minimal. Three drilled and tapped holes are put into the tail end of the lathe bed to hold the Z axis lead screw thrust washer seat/motor mount plate. The remaining motion control parts are either attached via existing holes or clamped onto the machine. Project completion time is 30 to 40 hours. Cost for mechanical hardware and materials is between $180 and $220. The plans provide several sources for the electrical parts and software. Project Plans: Engines 2353 Mini Mill CNC Conversion Plans $49.95 Plans to add CNC to a mini mill. These CNC Conversion plans were created by Ronald J. Steele. This is a complete set of plans to add CNC to a mini mill. They include a materials list with sources, plans for all the parts, and instructions for making the parts and installing them on the mini mill. The only permanent change made to the mini mill is to drill and tap two holes. Ron Steele says the cost of the hardware and materials, assuming you need to purchase everything, is about $160. The plans provide sources for all these items. The plans also provide several sources for the electrical parts and software. One kit includes software, 145 oz/in stepper motors, and a pre-wired boxed controller and sells for $645. It takes between 20 and 30 hours to machine the parts and bolt it all together Elbow Engine Plans $12.95 Complete plans to build a unique 5-cyliner steam engine. These plans were created by Bill Reichart. This steam engine has 10 pistons and no crankshaft. The plans include six pages of detailed drawings and construction notes. The engine is made from bar stock. No castings are required Epicyclic Steam Engine Plans $24.95 Complete plans to build an epicyclic steam engine. These plans were created by Bill Reichart. This engine uses a unique set of epicyclic gears where one gear revolves around another gear. There are 33 pages of plans that detail every part and describe methods of production. The engine is made from bar stock. No castings are required. You get the gears from Boston Gear Panther Pup Engine Plans $25.95 Complete plans to build a 4-cylinder, 4-cycle gasoline engine. These plans were created by Bill Reichart. The Panther Pup is an air-cooled internal combustion engine. There are 54 pages of plans, bound in a saddle-stitched booklet. The plans include detailed drawings of each part along with complete construction notes. Two castings are required. Plans are included to make your own patterns, or castings can be purchased from LittleMachineShop.com Panther Pup Engine Castings, Aluminum $ Panther Pup Engine Castings, Brass $ Pip-Squeak Engine Plans Complete plans to build a simple steam engine. These plans were created by Bill Reichart. The Pip-Squeak was designed to be a very first, easy to build engine. It is built from bar stock. No castings are required. It can be made on a small hobby lathe and a small drill press. A small milling machine helps, but isn't necessary Stirling-Steele Engine Plans $29.95 Complete plans to build a four-cylinder Stirling cycle engine from bar stock and commercial components. These plans were created by Ronald J. Steele. The package contains 26 pages of highly detailed drawings and instructions providing all the necessary information to produce this modern compact version of a Stirling engine. The Stirling- Steele engine can be machined on a 6" lathe and small milling machine from readily available material. A full bill of materials is included as are assembly instructions. This is not a kit but a full set of dimensioned drawings. Page 68

69 Project Plans: Tools Project Plans: Tools QC Tool Posts: QCTP Sets 2717 Belt Grinder Plans $ pages of plans 18 pages of instructions 2" x 72" belt stays sharp longer and cuts cooler than shorter belts Use for roughing, shaping, contouring of flat or angular stock Plans for a commercial-grade square wheel belt grinder. Machines like this sell for over $1000. This project consists of 17 pages of drawings and 18 pages of well written instructions. The drawings are printed on 11 x 17 paper, making them easy to read. Every aspect of this project has been explained and detailed, including 3 dimensional assembly drawings to show you where everything goes. Although this machine would feel right at home in a professional metal worker's shop, the average home shop machinist will also find endless uses for this grinder. Use it for deburring, sharpening drill bits, dressing mushroomed punches, and grinding HSS lathe tool bits. Although this project is not for a beginner, it was designed with the home shop machinist in mind. Anyone with modest equipment can complete this high performance machine. The prototype was built primarily with a 7" lathe, a drill press, and a MIG welder Rike-Vise Plans $8.95 The Rike-Vise was invented by Bill Reichart. This simple tool is especially designed for the home machine shop. For many jobs it will replace a standard vise. The Rike-Vise is described as two 90 angle plates joined at the corner, and providing a foot so it can be easily clamped to a machine table or a lathe faceplate. The square donut piece provides an accurate clamp to secure a work piece in the base. It is made of mild steel. The plans include tips on accurately building the vise, plus details on using it. The plans comprise six 8-1/2" x 11" pages. The plans include information on building and using the Rike-Vise. Features of the Rike-Vise: At the lathe you can turn square stock round or drill square stock perfectly concentric. You can also do the same to rectangular stock, and drill or turn it in the exact center or to one side, as you desire. The vise holds work perpendicular for drilling at your drill press. At the milling machine, you can mill an end perfectly square, or notch or groove perfectly parallel to the sides. It holds stock perpendicular for use at the surface grinder Quick Change Tool Post Set, 0XA, 4 $ Degree Cut-Off, Tormach 3112 Quick Change Tool Post Set, 0XA, $ Horizontal Cut-Off, Tormach Quick change tool post set for lathes with up to 8" swing 0XA, or series 000 size (60% of AXA size) Includes five steel tool holders Horizontal Cut-off tool holder Fits all 7x10 to 7x16 mini lathes Wedge type quick change tool post set.this quick change tool post set is designed for lathes with up to 8" swing.it is the perfect size for mini lathes. The tool holders have been designed specifically to work on the mini lathes and other lathes that have limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M10 stud, which is included.this quick change tool post requires 5/8" from the top of the compound rest to the center of the lathe.all working parts are hardened and ground steel. It is completely sealed for maintenance-free operation.this tool post mounts with an M10 stud.this set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2" cut-off blade - horizontal) 3119 QC 2MT Tool Holder, 0XA, Tormach $ QC Boring Tool Holder, 0XA, Tormach $ QC Cut-Off Tool Holder, 0XA, Tormach $ QC Cut-Off Tool Holder, 0XA, Tormach $ QC Knurling & Turning Tool Holder, 0XA, $26.95 Tormach 3115 QC Turning & Boring Tool Holder, 0XA, $14.95 Tormach 3114 QC Turning & Facing Tool Holder, 0XA, $13.95 Tormach 4101 Quick Change Tool Post Set, 0XA for $ HiTorque Bench Lathe 4039 Quick Change Tool Post Set, 0XA for $ Sherline and Taig 3113 Quick Change Tool Post, 0XA, Tormach $ Set Screws, M6x16 Socket Dog Point, Set $5.95 of 10 Quick change tool post set for lathes with up to 9" swing 60% of AXA, or series 100 size wedge type QCTP 4 Degree Cut-off tool holder Includes five tool holders All steel construction This is a true wedge type quick change tool post set that is an exact 6/10 scale copy of the AXA, or series 100 wedge type quick change tool post.this quick change tool post set is designed for lathes with up to 9" swing. It requires 3/4" from the top of the compound rest to the center of the lathe.it will hold turning tools with shanks from 1/4" to 1/2". The boring bar holder will hold 3/8" and 1/2" boring bars. It will hold 1/2" tall cut-off blades.all working parts are hardened and ground. It is completely sealed for maintenance-free operation.this set includes the tool post and the following tool holders:2 - #1 Turning & Facing1 - #2 Boring, Turning & Facing1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - 4 degree)this tool post mounts with an M10 stud that is included. It also includes a piece of steel from which you can make a T-slot nut to fit your lathe QC Tool Post Mount, 0XA for SC4 Lathes $ Quick Change Tool Post Set, 0XA for 8x12, $ x14 Lathe 4046 Quick Change Tool Post Set, 0XA for 9x20 $ Lathe 4058 Quick Change Tool Post Set, 0XA for $ Atlas/Craftsman 6" 4157 Quick Change Tool Post Set, 0XA for $ G0768 Page 69

70 QC Tool Posts: QCTP Sets 2280 Quick Change Tool Post Set, AXA $ Quick change tool post set for lathes with up to 12" swing AXA, or series 100 size Tool holders interchange with Aloris, Dorian, and Phase II All steel construction Includes five tool holders AXA, or series 100, wedge type quick change tool post set. This quick change tool post set is designed for lathes with up to 12" swing. It is a good fit on 9x20 lathes, but requires some modification or our mounting sleeve. Many people feel that these tool posts are too large for mini lathes, but others like the mass and rigidity they provide. All working parts are hardened and ground. It is completely sealed for maintenance-free operation. The tool holders interchange with Aloris, Dorian, and Phase II. This set includes the tool post and the following tool holders: No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, will hold 5/8" or 3/4" round shanks. No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning. This set also includes a 9/16"-18 threaded stud and a piece of steel from which you can make a T-slot nut to fit your lathe Compound Rest Top, for AXA QCTP on C6 $35.95 Lathe 3674 Tap & Tap Drill Bit, 9/16"-18 Thread $ Compound Rest Top, for AXA QCTP on C4 $35.95 and SC4 Lathe 4426 QC 2MT Tool Holder, AXA $ QC Boring Tool Holder, AXA $ QC Cut-Off Tool Holder, AXA $ QC Knurling & Turning Tool Holder, AXA $ QC Tool Post Mount, AXA for 9x20 Lathes $ QC Turning & Boring Tool Holder, AXA $ QC Turning & Facing Tool Holder, AXA $ Quick Change Tool Post, AXA $ Set Screws, M8x20 Socket Dog Point, Set $7.95 of Quick Change Tool Post Set, AXA, Aloris $ AXA, or series 100 quick change tool post set for lathes with up to 12" swing Made by Aloris, the originator of the super precision quick change tool post Tool holders interchange with Aloris, Dorian, and Phase II All steel construction Starter set Includes two tool holders Aloris Tool Technology Company is the originator of super precision Quick Change Tool Posts and tool holders for over 60 years. Since 1946, Aloris has revolutionized the metal working industry with the introduction of the first quick change tool post and has since been the standard of the industry, known worldwide for our integrity and lasting quality. AXA, or series 100, wedge type quick change tool post set. This quick change tool post set is designed for lathes with up to 12" swing. It is a good fit on 9x20 lathes. Many people feel that these tool posts are too large for mini lathes, but others like the mass and rigidity they provide. All working parts are hardened and ground. It is completely sealed for maintenance-free operation. The tool holders interchange with Aloris, Dorian, and Phase II. This set includes the tool post and the following tool holders: No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing. This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe. Rotary Tables: Rotary Tables 3658 Quick Change Tool Post Set, BXA $ Quick change tool post set for lathes with 10-15" swing BXA, or series 200 size Tool holders interchange with Aloris, Dorian, and Phase II All steel construction Includes five tool holders BXA, or series 200, wedge type quick change tool post set. This quick change tool post set is designed for lathes with up to 10-15" swing. All working parts are hardened and ground. It is completely sealed for maintenance-free operation. The tool holders interchange with Aloris, Dorian, and Phase II. This set includes the tool post and the following tool holders: No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning. This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe. The BXA turning tool holders hold tools up to 5/8". The cut-off tool holds 11/16" blades QC Boring Tool Holder, BXA $ QC Cut-Off Tool Holder, BXA $ QC Knurling & Turning Tool Holder, BXA $ QC Turning & Boring Tool Holder, BXA $ QC Turning & Facing Tool Holder, BXA $ th Axis Rotary Table for CNC $ Includes stepper motor Includes tailstock Includes adapter to mount a 3" lathe chuck Includes hold down clamps to mount the rotary table on the mill table This 4" (100 mm) 4th axis rotary table is great for small CNC milling machines. Rotary Table Comparison See the rotary table comparison chart at Rotary Table, 4" H/V $ " (100 mm) diameter Use in horizontal or vertical position Worm ratio is 72 to 1 10 second rotational accuracy 2 Morse taper center hole This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360 scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged.the worm gear and center hole are hardened and ground.the table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the vertical position.the worm ratio is 72 to 1.Flatness of clamping surface: " TIRParallelism of clamping surface to base: " TIRSquareness of clamping surface to angle face: " TIRSquareness of clamping surface to center slot: " TIRConcentricity of center bore: " TIRMaximum spacing error: 1 minute, 20 seconds Dividing Plate Set for 4" Rotary Table $ Rotary Table, 4" with Tailstock & Dividing $ Plate 3791 Rotary Table, 4" with Tailstock, Dividing $ Plate, & 3-Jaw Lathe Chuck 3792 Rotary Table, 4" with Tailstock, Dividing $ Plate, & 4-Jaw Lathe Chuck 1943 T-Slot Nuts, 6 mm and Clamping Bars $ Tailstock for 4" Rotary Table $99.95 Page 70

71 Rotary Tables: Rotary Tables 5603 Rotary Table, 4" H/V $ Horizontal or vertical use 4" diameter table rotates 360 1:36 ratio or 10 per handwheel revolution Scale reads to 15 minutes Low profile - only 2-1/8" tall Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 2.167" in the horizontal position. The small size of the table is good for small milling machines. The table has a low profile of 2-1/8" in the horizontal position.this precision ground graded cast iron table is graduated for a full 360. The handwheel utilizes a 1:36 ratio resulting in 10 per handwheel revolution.table comes with two clamping studs, two 45mm clamping bars and two t-nuts Rotary Table, 3" H/V $ Tailstock for 3" & 4" Rotary Tables $ Rotary Table, 4" Precision $ " (100 mm) diameter Use in horizontal or vertical position Worm ratio is 72 to 1 10 second rotational accuracy 2 Morse taper center hole This horizontal / vertical precision rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The table is graduated with a 360 degree scale. The rotary table is furnished with lock down clamps. This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw chucks. The model Precision Rotary Table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to mounting slot). The worm ratio is 72 to 1. Flatness of clamping surface: ". Parallelism of clamping surface to base: ". Squareness of clamping surface to angle face: ". Squareness of clamping surface to center slot: ". Concentricity of center bore: " TIP Adapter, 3" Lathe Chuck $ Adapter, 3" Lathe Chuck $ Dividing Plate Set for 4" Rotary Table $ Rotary Table, 4" with Tailstock & Dividing $ Plate 3131 Rotary Table, 4" with Tailstock, Dividing $ Plate, & 3-Jaw Lathe Chuck 3132 Rotary Table, 4" with Tailstock, Dividing $ Plate, & 4-Jaw Lathe Chuck 1813 T-Slot Nuts, 8 mm and Clamping Bars $ T-Slot Nuts, 8 mm and Clamping Bars $ Tailstock for 4" Rotary Table $ Rotary Table, 4" Precision, DRO $ " (100 mm) diameter Use in horizontal or vertical position Worm ratio is 72 to 1 Digital angular readout with 1 minute (0.017 degree) resolution digital angular readout 2 Morse taper center hole This horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The table is graduated with a 360 degree scale. The rotary table is furnished with lock down clamps.the digital readout displays degrees and minutes or decimal degrees. This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw chucks.the table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to mounting slot). The worm ratio is 72 to 1.Flatness of clamping surface: ".Parallelism of clamping surface to base: ".Squareness of clamping surface to angle face: ".Squareness of clamping surface to center slot: ".Concentricity of center bore: " TIP Rotary Table, 4" Tilting $ Tilting table 0 to 90 4" diameter table rotates 360 1:36 ratio or 10 per handwheel revolution Scale reads to 15 minutes Low profile - only 2-5/8" tall Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 2.167" in the horizontal position.. The small size of the table is good for small milling machines. The table has a low profile of 2-5/8" in the horizontal position.this precision ground graded cast iron table is graduated for a full 360. The handwheel utilizes a 1:36 ratio resulting in 10 per handwheel revolution. Table tilts from 0 to 90 and locks into place.table comes with two clamping studs, two 45mm clamping bars and two t-nuts Rotary Table, 3" Tilting $ Rotary Table, 4", Phase II $ " (100 mm) diameter Use in horizontal or vertical position Worm ratio is 72 to 1 10 second rotational accuracy 2 Morse taper center hole This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360 scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged. The worm gear and center hole are hardened and ground. The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the vertical position. The worm ratio is 72 to 1. Flatness of clamping surface: " TIR Parallelism of clamping surface to base: " TIR Squareness of clamping surface to angle face: " TIR Squareness of clamping surface to center slot: " TIR Concentricity of center bore: " TIR Maximum spacing error: 1 minute, 20 seconds Rotary Table, 6", Phase II $ This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360 scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged. The worm gear and center hole are hardened and ground. The table is 3.35" high when horizontal, and the centerline is 4.92" above the table when in the vertical position. The worm ratio is 90 to 1. Flatness of clamping surface: " Parallelism of clamping surface to base: " Squareness of clamping surface to angle face: " Squareness of clamping surface to center slot: " Concentricity of center bore: " Dividing plates and a tailstock are available for this rotary table. This is Phase II PN Adapter, 5" Lathe Chuck $ Dividing Plate Set for 6" Rotary Table $ Tailstock for 6" Rotary Table, Phase II $ Rotary Table, 6" with Tailstock & Dividing $ Plate, Phase II Page 71

72 Threading Tools: Die Holders Threading Tools: Die Holders 2314 Die Holder $32.95 Holds 13/16" and 1" round dies Holds dies in alignment when threading on the lathe 2 Morse taper shank fits the mini lathe tailstock Tommy bar provides torque for larger thread sizes This die holder goes in the tailstock of the mini lathe, or any other lathe with a 2 Morse taper tailstock. It has a short Morse taper for the mini lathe so you may need to put a ball bearing or such like behind it so it will eject from lathes that expect a standard length taper. The arbor is made of steel. The body is aluminum for low mass, so it spins easily when you release it. This prevents small parts from twisting off. This tool does not work with hexagonal dies. Hexagonal dies are not made for creating new threads, they are for maintenance work Die Stock, No. 2, 13/16" $4.95 For adjustable round split dies Holds 13/16" dies 6-1/2" overall length Threading Tools: Hand Tappers 4667 Die Stock, No. 3, 1" $ Die Stock, No. 5, 1-1/2" $ Hand Tapper $ Assures straight tapped holes Helps prevent broken taps 9 tap adapters included Spindle is balanced for sensitive feel Sliding vise jaws keep work from slipping This rigid hand tapper helps prevent broken taps while tapping straight holes. Precision ground work table and spindle ensure accuracy. Tap adapters for #6, #8, #10, 1/4", 5/16", 3/8", 7/16" 1/2" and 5/8" taps. (Not recommended for taps smaller than #6.) The work area is 6.5" x 10". The clearance height is 7" and the throat depth is 7.5" The overall height is 13". Includes an offset handle and a rack for the tap adapters Hand Tapper, Mini $66.95 Assures straight tapped holes Helps prevent broken taps 7 tap adapters included This rigid hand tapper helps prevent broken taps while tapping straight holes. Precision ground work table and spindle ensure accuracy. Tap adapters for #0 through 5/16" taps. The table is 8.5" x 6". The clearance height is 3.75" and the throat depth is 4.5" The overall height is 9" Tap Adapters, Set of 7 Threading Tools: Lathe Threading 3695 Threading Tool, External, 3/8" Indexable, $79.00 HSS Triangle Inserts, A R Warner For external threading, 8 through 36 TPI 3/8" shank, 3/8" IC Inserts, 5" long 2 inserts included: TNMC-32-NV and TPMC-32-NV 1 extra 4-40 flat head cap screw 1 wrench This Arthur R. Warner Co. precision threading tool will turn external threads. The tool can turn from 8 through 36 pitch, 60 degree threads.the Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Threading Tool, Int / Ext, 1/2" Indexable $90.00 HSS Triangle Inserts, A R Warner For internal and external threading 1/2" shank, 3/8" IC Inserts, 5" long 2 inserts included: TNMC-32-NV and TPMC-32-NV 1 extra 4-40 flat head cap screw, 1 wrench For 8 through 36 pitch 60 degree threading This A R Warner precision threading tool will turn both internal and external threads. You can mount inserts on both ends. One end mounts the insert at the end of the tool for external threading. The mount on the other end is offset. Mount the insert one way for internal threading. Turn the insert around and you can use the tool for external threading too.the minimum bore diameter for internal threading is 1.375". The maximum thread depth is 0.100".The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products Screw, Insert Retaining, 6-32 FH $ Threading Tool, Internal, 3/8" Indexable, $85.00 HSS Triangle Inserts, A R Warner For internal threading Includes three T-15 high speed steel TPMW inserts Includes two MS-1152S screws and one T-7 wrench This Arthur R. Warner Co. boring bar for single-point cutting internal threads has 0.375" shank and is 5" long.this tool requires a 0.5" minimum hole size.uses TPMW and TPMW inserts. The maximum thread depth is 0.100".The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products Threading Tool, Internal, 1/2" Indexable $85.00 HSS Triangle Inserts, A R Warner 2221 Tool Bit, 5/16" HSS Threading $9.95 This threading tool bit is sharpened on both ends to a 60 angle for threading.it is made from high speed steel.both ends are offset, one so you can thread near a left shoulder, and the other so you can thread near a right shoulder Threading Tool Bit and Center Gage $ Tool Bit, 1/4" HSS Internal Threading $12.95 Threading Tools: Tap and Die Sets 2851 Die Set, 0-80 to 5-40 Threads $92.95 Miniature tap set includes 0-80, 1-64, 2-56, 3-48, 4-40, and 5-40 dies Round adjustable split dies 13/16" diameter High Speed Steel Imported For cutting external screw threads either by hand or with a die stock or by machine with a die holder. They can be utilized to cut smaller or larger tolerance by turning the adjustment screw Die, 0-80 Thread $ Die, 1-64 Thread $ Die, 2-56 Thread $ Die, 3-48 Thread $ Die, 4-40 Thread $ Die, 5-40 Thread $ Die, 6-32 Thread $ Die, 8-32 Thread $ Die, Thread $15.95 Page 72

73 Threading Tools: Tap and Die Sets 3601 Tap & Die Set, 39-Piece Solid Round Dies $ piece machine screw & fractional tap and solid round die set Machine screw and fractional sizes of plug style taps plus 1" solid round dies Includes three tap handles and two die stocks 18-leaf standard thread pitch gauge and screwdriver Plastic case with lift-out tray This USA-made Hansen brand 39 PC set can be used to create new threads. The taps and dies are made from high carbon steel.the Hanson 39-Piece Machine Screw / Fractional Tap and Solid Round Die Set includes machine screw taps, fractional plug style taps, plus 1-inch solid round dies. A adjustable guide diestock for cutting external threads on metal cylinders is included, as well as a adjustable handle tap wrench to create internal screw threads, and a T-handle tap wrench. There's also an 18-leaf standard thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.39-pc set in plastic case includes the following items:machine Screw Plug Tap and 1" Solid Round Dies in sizes: 4-40 NC, 6-32 NC, 8-32 NC, NC, NF, NCFractional Plug Tap and 1" Solid Round Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NFPipe Thread Plug Tap and 1" Solid Round Dies in sizes: 1/8" - 27 NPTThreading Tools: Adjustable Die Stock - 1" Dies, T-Handle Wrench - Taps No. 0 to 1/4", Adj. Handle Tap Wrench - Taps No. 0 to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case 3597 Tap & Die Set, 41-Piece $ piece machine screw & fractional hexagonal tap and die set for threading operations Machine screw and fractional sizes of plug style taps plus 5/8" and 1" hexagon dies Includes three tap handles and two die stocks 18-leaf standard thread pitch gauge and screwdriver Plastic case with lift-out tray This USA-made Hansen brand 41 PC set can be used to restore or start new threads. The taps and dies are made from high carbon steel. The Hanson 41-Piece Machine Screw / Fractional Tap and Hex Die Set includes machine screw taps, fractional plug style taps, plus 5/8-inch and 1-inch hexagon dies in 17 different sizes. A DS- 26 adjustable guide diestock and DS-57 plain diestock for cutting external threads on metal cylinders is included, as well as a TR- 88 adjustable handle tap wrench to create internal screw threads, a TR-73 two-in-one tap wrench, and a TR-50 two-in-one tap wrench. There's also an 18-leaf standard thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized. 41-pc set in plastic case includes the following items: Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 4-40 NC, 6-32 NC, 8-32 NC, NC, NF, NC Fractional Plug Tap and 1" Hexagon Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF Pipe Thread Plug Tap and 1" Hexagon Dies in sizes: 1/8" - 27 NPT Threading Tools: Adjustable Die Stock - 1" Dies, Plain Die Stock - 5/8" Hexagon Dies, Adj. Handle Tap Wrench - Taps No. 0 to 1/2", T-Handle Wrench - Taps No. 0 to 1/4", Two-in-One Tap Wrench - Taps 1/4" to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case 3600 Tap & Die Set, 41-Piece Metric $ Tap & Die Set, 41-Piece $45.95 Tungsten Steel Hex dies are ideal for working in tight places Furnished in a fitted case with lift-out tray Imported This 41-piece tap and die set includes all the common sizes from #4 to 1/2". The set includes a screw pitch gage, a die stock and a T-handle tap wrench. The threads covered include: NC: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 NF: 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20 NPT: 1/ Tap & Die Set, 41-Piece Metric $ Tap Set, 0-80 to 5-40 Thread $34.95 Miniature tap set includes 0-80, 1-64, 2-56, 3-48, 4-40, and 5-40 taps High speed steel with ground thread Plug tap has a 3-5 thread taper Made in USA Hand taps are the most commonly used general purpose tap. They are recommended for tapping free machining steels, stainless steels, aluminum, zinc, and ductile materials. Hand taps are utilized in either through or blind hole tapping Tap, 0-80 Thread $ Tap, 1-64 Thread $ Tap, 2-56 Thread $ Tap, 3-48 Thread $ Tap, 4-40 Thread $ Tap, 5-40 Thread $ Tap, 6-32 Thread $ Tap, 8-32 Thread $ Tap, Thread $ Tap, Thread $3.49 Threading Tools: Tap Holders and Guides 3602 Tap Adapters, 3/8" Socket Drive $28.95 Jaws adjust to tightly secure taps Fits all 3/8" square drive wrenches Small adapter fits taps for #0 to 1/4" thread Large adapter fits taps for 1/4" to 1/2" thread For use in tight workspaces or for putting some muscle on those hard-to-turn large taps. Designed for use with taps, reamers, screw extractors and other tools with a square shank. Not recommended for cutting new threads Tap Guide, Fisher $13.95 Made in USA This tap guide helps you start threaded holes straight. The reversible point is spring loaded to maintain pressure on the tap. One end of the point has a center hole for small taps, while the other end is pointed for larger taps.the 0.500" diameter body is ground and knurled for easy handling.remove the setscrew in the back end to reverse the point.this is a quality American-made product from Fisher Machine Shop Tap Guide, 2MT Short, Fisher $ Tap Handle, Adjustable $7.95 Offset handle adjustable tap & reamer wrench Straight handle design provides greater leverage, especially when using larger diameter tapes For Taps No. 0 To 1/2" Straight handle design provides greater leverage, especially when using larger diameter tapes Tap Wrench 3-5/8", Starrett $30.00 Body length: 3-5/8" (90mm) Capacity tap size: No Square shank: 1/4" (6.35mm) Starrett catalog number 174 This is a well-designed tap wrench, ideal for holding smaller diameter taps, drills, reamers, and other tools up to 1/4" (6.35 mm) in diameter. It works with 0-14 tap sizes. It will firmly grip round or square shanks, is lightweight and well proportioned. The gripping surface is properly heat treated to withstand any ordinary use Tap Wrench 6", Starrett $ Tap Wrench 9", Starrett $ Tap Wrench 5", Adjustable $3.95 Body length: 5" (127 mm) Capacity tap size: 0-5/16" Knurled steel handles Jaws surface hardened Zinc die casting 5391 Tap Wrench 8", Adjustable $4.95 Page 73

74 Threading Tools: Tap Holders and Guides 3654 Tap Wrenches, Miniature $12.95 For #0 to #6 taps For M1.6 to M3.5 taps Fits 0.110" driving square Light weight tool maximizes "feel" while tapping Set of two tap wrenches These miniature tap wrenches are perfect for very small taps. They let you actually feel the threads being cut, and you can easily feel the tap tighten up when it is time to reverse and break the chips.the longer tap wrench is 2.5" long. The shorter one is 1.5" long. They are brightly anodized so you won't lose them Tapping Block, OMW $39.95 Starts taps straight - reduces breakage Fits taps from 0-80 to 3/8-16 Elegant design Over 90% of broken taps are the result of the tap not starting straight in the hole, yet most people tapping by hand simply "eyeball" their tap into a hole and then are amazed when the tap snaps in a valuable part! The OMW Tapping Block was inspired by a block used nearly every day by a master tool and die maker I had the pleasure of working with in my shop. He used his block whenever tapping a hole, and I never saw him break a tap! Simply hold the tapping block flat against your work, above the hole you've tap drilled. Place your tap through the appropriately sized guide hole and you are assured of perfect tap alignment when starting your thread. The OMW Tapping Block is manufactured of the highest quality 4140 steel. It is beautifully designed, expertly knurled and chamfered for easy grip, with counterbored holes to allow for material chip clearance when tapping. Fits all common taps from 0-80 thread to 3/8-16 (the seven holes fit tap shanks of #0- #6, #8, #10, #12, 1/4, 5/16, and 3/8). This Tapping Block should be in the tool chest of every machinist, from beginner to expert Tapping Block, OMW Metric $ T-Handle Tap Wrench for #0 to #10 Taps, $33.50 Starrett Starrett T-handle tap wrench Starrett catalog number 93A For holding taps, drills, reamers, and other small tools to be turned by hand Fits machine screw taps from #0 to #10 Fits fractional thread taps from 1/16" to 3/16" The body of this T-handle tap wrench is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. The jaws conform to the tool being held, making it rigid and less apt to loosen. They are properly heat treated to withstand ordinary shop use. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. These tools are designed to hold square shanks. Round shanks can be gripped, but care must be used. Excessive tightening may break the binding nut T-Handle Tap Wrench for 1/4" to1/2" $47.50 Taps, Starrett 3554 T-Handle Tap Wrench for 7/32" to 7/16" $35.50 Taps, Starrett 2852 T-Handle Tap Wrench for #0 to #8 Taps $9.95 For hand tapping and driving screw extractors Fits machine screw taps from #0 to #8 Fits fractional thread taps from 1/16" to 5/53" For holding taps, reamers, and other small tools to be turned by hand T-Handle Tap Wrench for #8 to 1/4" Taps Threading Tools: Taps and Dies 3427 V-TapGuide Hand Tap Guide for Inch $25.50 Threads Eliminate tap breakage due to improper alignment Automatically squares up the tap with the surface 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners Portable, pocket size Protective plastic storage tube is included V-TapGuide by Big Gator Tools is made of a special alloyed steel that is ground and heat treated for durability. The guide holes are smooth, unlike drilled or reamed holes. Guide holes are sized for ANSI standard ground taps. The V-TapGuide handles taps for UTS screw sizes of #0, #1, #2, #3, #4, #5, #6, #8, #10, 1/4", 5/16", 3/8", 7/16", 1/2", and 5/8" V-TapGuide Hand Tap Guide for Metric $25.50 Threads 3866 V-TapGuide Hand Tap Guide Set, Inch and $49.95 Metric Both inch and metric taps Eliminate tap breakage due to improper alignment Automatically squares up the tap with the surface 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners Portable, pocket size. Protective plastic storage tube is included V-TapGuide by Big Gator Tools is made of a special alloyed steel that is ground and heat treated for durability. The guide holes are smooth, unlike drilled or reamed holes. Guide holes are sized for ANSI standard ground taps. The inch V-TapGuide handles taps for UTS screw sizes of #0, #1, #2, #3, #4, #5, #6, #8, #10, 1/4", 5/16", 3/8", 7/16", 1/2", and 5/8". The metric V-TapGuide handles taps for metric screw sizes of 1.6 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, and 16 mm. Metric Hand Taps High speed steel taps Plug style 2939 Tap, M3x0.5 Metric Hand Plug $ Tap, M4x0.7 Metric Hand Plug $ Tap, M5x0.8 Metric Hand Plug $ Tap, M6x1.0 Metric Hand Plug $ Tap, M8x1.25 Metric Hand Plug $ Tap, M10x1.5 Metric Hand Plug $11.00 Threading Tools: Thread Repair Tools Thread Repair Kits, Individual Sizes For repairing tapped holes in soft metal Simple and easy to use Stronger than original threads 25 Stainless steel coil (helical) inserts Thirty-one piece thread repair kits. Used for repairing tapped holes that have been stripped or damaged. The stainless steel insert is wound into a coil (helical). Once inserted into the hole the radial pressure of the insert holds it firmly into place. The kit comes with inserts, the appropriate size HSS twist drill, installation tool, tang removal tool and L hex wrench. Each kit contains: 25 stainless steel inserts, 1 Screw thread insert (STI) high speed steel tap, 1 High speed steel twist drill, 1 Coil driver, 1 Tang breaker, 1 L hex wrench, 1 Metal case 5829 Thread Repair Kit, 1/4"-20 $ Thread Repair Kit, 5/16"-18 $ Thread Repair Kit, 3/8"-16 $ Thread Repair Kit, M5x0.80 $ Thread Repair Kit, M8x1.25 $16.15 Page 74

75 Tooling: Arbors and Sleeves Tooling: Arbors and Sleeves 2393 Arbor, Blank 3MT Drawbar $12.95 This arbor has a soft end which can be machined to suit your purpose.the arbor has a 3 Morse taper shank and is threaded for a 3/8-16 NC drawbar.the machinable end is 1.5" long and 1.5" in diameter Arbor, Blank 2MT Drawbar $12.95 Arbors, Drill Chuck, Morse Taper Shank The long taper goes in the lathe tailstock or mill spindle. The short taper goes in the drill chuck. The 2MT Stub arbors fit the mini lathe tailstock without cutting R8 to 3MT Sleeve This sleeve adapts 3 Morse taper tools to R8 spindles.it is hardened and precision ground R8 to 2MT Sleeve $ Slitting Saw Arbor, 1/2" Shank $14.95 For saw blades up to 3/16" thick Fits 1/2", 5/8", 3/4", 7/8", and 1" holed slitting saw blades 1/2" straight shank 3544 Arbor, Drill Chuck 0MT Standard to 2JT $ Arbor, Drill Chuck 0MT Standard to 33JT $ Arbor, Drill Chuck 1MT Tang to 2JT 1894 Arbor, Drill Chuck 1MT Tang to 33JT 4631 Arbor, Drill Chuck 2MT Drawbar to 0JT $ Arbor, Drill Chuck 2MT Drawbar to 2JT $ Arbor, Drill Chuck 2MT Drawbar to 33JT $ Arbor, Drill Chuck 2MT Short to 2JT $ Arbor, Drill Chuck 2MT Short to 3/8"-24 $8.95 Thread 1804 Arbor, Drill Chuck 2MT Short to 33JT $ Arbor, Drill Chuck 2MT Standard to 33JT $ Arbor, Drill Chuck 2MT Tang to 2JT $ Arbor, Drill Chuck 2MT Tang to 3/8"-24 $8.95 Thread 1190 Arbor, Drill Chuck 2MT Tang to 33JT $ Arbor, Drill Chuck 3MT Drawbar to 2JT 1808 Arbor, Drill Chuck 3MT Drawbar to 3/8"- 24 Thread 1806 Arbor, Drill Chuck 3MT Drawbar to 33JT 1191 Arbor, Drill Chuck 3MT Tang to 2JT 1614 Arbor, Drill Chuck 3MT Tang to 3/8"-24 Thread 1192 Arbor, Drill Chuck 3MT Tang to 33JT Arbors, Drill Chuck, R8 Shank The long taper goes in the mill spindle. The short taper goes in the drill chuck Arbor, Drill Chuck R8 to 2JT 5445 Arbor, Drill Chuck R8 to 2JT, Professional $14.95 Grade 1676 Arbor, Drill Chuck R8 to 33JT 5444 Arbor, Drill Chuck R8 to 33JT, $14.95 Professional Grade Arbors, Drill Chuck, Straight Shank The straight end goes in a collet or other tool holder. The short taper goes in the drill chuck Arbor, Drill Chuck 3/8" Straight to 0JT $ Arbor, Drill Chuck 3/8" Straight to 2JT 1195 Morse Taper Sleeve 3MT-2MT Morse taper sleeve adapts 2 Morse taper tools to 3 Morse taper machines. Hardened and precision ground Morse Taper Sleeve 2MT-1MT $ Morse Taper Sleeve 3MT-1MT Tooling: Clamping Kits 4647 Slitting Saw Arbor, R8 Shank $19.95 For saw blades up to 3/16" thick Fits 1/2", 5/8", 3/4", 7/8", and 1" holed slitting saw blades R8 Shank This arbor has an R8 shank and fits slitting saw blades up to 3/16" thick. It s compatible with blades that have a center hole of 1/2", 5/8", 3/4", 7/8", or 1" Stub Milling Machine Arbor, 3/4" Straight $59.95 Shank 1" diameter arbor with spacer rings and left-hand nut 3/4" straight shank fits in collets or end mill holders Fits 1" ID slitting saws and milling cutters 2551 Clamp, Adjustable One piece assembly allows quick set-up Instant height adjustment Attached brass covers protect machine table and workpiece Fits 7/16" and 12 mm T-slots Clamps work up to 1.75" (44 mm) thick, clamp is 1.35" (34 mm) wide overall This adjustable clamp fits into the T-slots on the mill table and quickly adjusted to secure your work piece. Clamp fits 7/16 and 12 mm T-slots and the clamp has a brass covering at the point of contact to protect the work piece Clamping Kit, 3/8" T-Slot $ piece clamping kit 5/16"-18, 3/8" T-Slot This clamping kit fits the 3/8" T-slots on the Grizzly G0758 mill. Use this kit for mills with 10 mm T-slots. The clamping kit includes 24 5/16"-18 studs, 12 step blocks in pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold downs. Comes in a wall mount rack Clamping Kit, 6 mm T-Slot, 36-Piece $ piece clamping kit This clamping kit fits the 6 mm T-slots on the Taig mill, and the 1/4" T-slots on the Sherline mill. The clamping kit includes 10 M5 studs, 4 step block pairs, 6 T- slot nuts (in each of two sizes), 6 flange nuts, and 6 step clamps. There are more parts included than shown in the photo Clamping Kit, 7/16" T-Slot $48.95 Stud Size: 3/8"-16 T-Slot: 7/16" 58 Pieces Made of powered casting steel, heat treated Storage rack included 58-piece clamping kit 3/8"-16, 7/16 T-Slot This machinist clamping kit fits the 12 mm T-slots on the mini mill. The t-slot clamp kit includes 24 3/8-16 studs, 12 step blocks in pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold downs. Comes in a wall mount rack Clamping Kit, 1/2" T-Slot $ Clamping Kit, 5/8" T-Slot $49.95 Page 75

76 Tooling: Clamping Kits Tooling: Drill Chucks 2039 Clamping kit, 8 mm T-Slot, 36-Piece $ piece clamping kitthis clamping kit fits the 8 mm T-slots on the micro mill.the clamping kit includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps Clamping Kit, 8 mm T-Slot, 20-Piece $34.95 T-Slot and Flange Nuts T-slot nuts are used on mill tables and rotary tables. They are heat treated and have a black oxide finish. The size of a T-slot nut is the width of the top of the T-slot T-Slot Nut, 1/4" $ T-Slot Nut, 10 mm $ T-Slot Nut, 12 mm $ T-Slot Nut, 6 mm $ T-Slot Nut, 8 mm $ Flange Nut, 3/8"-16 $ Flange Nut, 3/8"-16 $ Flange Nut, 5/16"-18 $ Flange Nut, M6 $ T-Slot Nut, 1/2" $ T-Slot Nut, 7/16" $ T-Slot Nuts, 6 mm and Clamping Bars $17.95 Four T-slot nuts for 6 mm T-slots Four studs of two different lengths Two flange nuts Two step clamps Two step blocks This set of T-slot nuts and clamping bars fits our 4" H/V rotary table (PN 1927) and the Phase II 4" rotary table (PN 1727). This kit also fits Taig mills T-Slot Nuts, 8 mm and Clamping Bars $14.95 Two T-slot nuts for 8 mm T-slots Two studs Two flange nuts Two step clamps Fore step blocks This set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 1810). It also fits the Harbor Freight micro mill T-Slot Nuts, 8 mm and Clamping Bars $24.95 Two T-slot nuts for 8 mm T-slots Two studs Two flange nuts Two step clamps Two step blocks This set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 1810). It also fits the Harbor Freight micro mill Drill Chuck, 1/2" High degree of accuracy All working parts hardened Key included Capacity: 1/32" - 1/2" Mounts to 33 Jacobs taper arbor 1/32" - 1/2 Capacity drill chuck designed for bench and floor drill presses, mills, lathes. Hardened ground center jaw improves durability and ensures straight alignment. Runout of this chuck is (0.20 mm) or less Drill Chuck, 3/8" $ Drill Chuck, 1/2" Keyless $34.95 Self-tightening design No chuck key required Hardened tool steel Capacity: 1/32" - 1/2" Mounts to 33 Jacobs taper arbor 1/2" keyless drill chuck. No chuck key is required with this self-tightening design. The Jacobs keyless chuck is made from hardened tool steel to ensure accuracy and extended life. The rated capacity is 1/32" to 1/2". Number 33 Jacobs taper mount. Runout of this chuck is 0.005" (0.13 mm) or less Drill Chuck, 3/8" Keyless $ Drill Chuck, 1/2" Professional Grade $29.95 Precision made with the highest TIR Designed for heavy duty jobs Key included Capacity: 1/32" - 1/2" Mounts to 33 Jacobs taper arbor 1/32" - 1/2 Capacity professional grade drill chuck. Designed for heavy jobs; all working parts are hardened and manufactured to the highest standards for durability and straight alignment. This chuck is comparable to a Jacobs heavy-duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Chuck key is included Drill Chuck, 3/8" Professional Grade $ Drill Chuck, 5/8" Professional Grade $ Drill Chuck, 1/2" with 2MT Short Arbor $21.95 Package designed for mini lathe tailstock Capacity 1/32-1/2 chuck Hardened for high degree of accuracy Key included Mounted on a short 2 MT shank for the mini lathe 1/32" - 1/2 Capacity drill chuck with hardened ground center jaw for improved durability and straight alignment. Chuck runout is (0.20 mm) or less. 2 Morse taper to 33 Jacobs taper. This arbor has a short Morse taper and does not need to be cut to use in the tailstock of the mini lathe. Also fits Jet 1014 mini wood lathe Drill Chuck, 1/2" with 2MT Standard Arbor $21.95 Combo Chuck and Arbor package for small lathe tailstock Capacity 1/32-1/2 chuck Hardened for high degree of accuracy Key included Mounted on a standard 2MT arbor Chuck and Arbor combo pack. 1/32" - 1/2 capacity drill chuck with hardened ground center jaw for improved durability and straight alignment. Chuck runout is (0.20 mm) or less. This chuck comes with a standard length 2 Morse taper arbor that will eject from most lathes with a 2MT tailstock taper Drill Chuck, 1/2" with R8 Shank $23.95 High degree of accuracy All working parts hardened Chuck Key included Capacity: 1/32" - 1/2" Mount: 33 Jacobs taper with R8 Shank 1/32" - 1/2 Capacity drill chuck with a 33 Jacobs taper arbor that has an R8 Shank. Chuck has a hardened ground center jaw that improves durability and ensures straight alignment. The chuck s roundout is (0.20 mm) or less. Fits mini mills with an R8 spindle. Page 76

77 Tooling: Drill Chucks Tools & Things: Abrasives 5469 Drill Chuck, 1/2", Ball Bearing $64.95 Capacity: 1/32" - 1/2" Taper Mount: 33JT +/-.0032" (.0813 mm) TIR Ultra smooth with ball bearing Chuck key Included Extra heavy duty, all parts hardened and precision ground. Antithrust ball bearing to increase the grip power with high speed drilling Drill Chuck, 3/8", Ball Bearing $ Drill Chuck, 5/32" $52.95 Capacity: 1/64" - 5/32" Taper Mount: 0JT +/-.006" (.1524 mm) TIR Made of anti-rust stainless steel, acid resistant Chuck key Included Recommended for EDM machines and the food & marine industries Drill Chuck, 6 mm for Unimat 3 & 4 and $24.95 SIEG C0 Lathes 0.6 to 6 mm (0.024" to 0.24") capacity M14 x 1.0 mounting thread Fits Unimat 3 & 4 lathes Fits SIEG C0 lathes Includes chuck key Drill chuck for Emco Unimat 3, Unimat 4 and SIEG C0 4x5 lathes. Also works with Harbor Freight Central Machinery 4x5 Micro Lathe. M14 x 1.0 mounting thread with a chuck capacity of mm ( ). Includes chuck key Key, 1/2" Drill Chuck $3.95 This chuck key fits our 3153 and /2" drill chucks 3790 Sensitive Drill Feed and 1/8" (3 mm) $ Keyless Drill Chuck Fingertip control for drilling small holes Helps prevent drill breakage 0JT taper, 1/2" diameter precision ground straight shank Spring loaded 3/4 travel fits most drills, mills, lathes or jig borers Capacity: 0-1/8" (0-3mm ) Keyless drill chuck Sensitive drill feed designed for drilling small holes combined with a 0"-1/8" (3 mm) capacity keyless drill chuck. To use the sensitive drill feed, grasp the knurled ring and pull it down to feed the drill into the workpiece. The internal spring retracts the drill when the ring is released. No chuck key is required with this self-tightening design. The chuck is made from hardened tool steel to ensure accuracy and extended life. The rated capacity of the drill chuck is 0 to 3 mm. Number 0 Jacobs taper mount " (0.05 mm) maximum runout Sensitive Drill Feed $ Drill Chuck, 1/8" (3 mm) Keyless $64.95 Abrasive Cloth, 1" Wide, Individual Grits Aluminum oxide abrasive High grade resin-bonded on J-weight cotton cloth backing Flexible for contour work The price is for one foot. Order as many feet as you want and we will cut it to that length. Maximum length is 150 feet. Use for cleaning and deburring metal surfaces. Can be used with water or oil Abrasive Cloth, 1" Wide, 240 Grit $ Abrasive Cloth, 1" Wide, 320 Grit $ Abrasive Cloth, 1" Wide, 400 Grit $0.29 Tools & Things: Adhesives Abrasive Sheets, 9" X 11", Individual Grits Aluminum oxide abrasive High grade resin-bonded on J-weight cotton cloth backing Flexible for contour work Use for cleaning and deburring metal surfaces. Can be used with water or oil Abrasive Pad, Maroon Hand Pad, 3M $ Abrasive Sheet, Wet or Dry, 240 Grit $ Abrasive Sheet, Wet or Dry, 320 Grit $ Abrasive Sheet, Wet or Dry, 400 Grit $ Abrasive Sheet, Wet or Dry, 600 Grit $0.49 Cratex Bullet Shaped Points Diameter: 9/32", Length: 1", Arbor hole: 1/16" For Proxxon and Dremel rotary tools Sold individually Mandrels fit 1/16" arbor hole Cratex bullet shaped points are used for smoothing and polishing hard to reach surfaces such as grooves, ball corners, holes, clasps, spirals, flutes, and edges. They are widely used for polishing molds, dies, patterns and light castings Cratex Bullet Shaped Point, 9/32" Medium $ Cratex Bullet Shaped Point, 9/32" Coarse $ Cratex Point Mandrel for Bullet Points, 1/8" Shank 4946 Cratex Point Mandrel for Bullet Points, $4.95 3/32" Shank 3978 J-B Weld $5.95 Cold-weld compound Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted Super strong and safe to use Don't scrap that damaged item that nothing else can fix! J-B Weld is an incredibly versatile product that can repair everything from damaged welds and solders to a precious heirloom. Save money, save time, and save your sanity for drastically less money than other forms of permanent repair.j- B Weld is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. J-B Weld is the smart way to repair something... and for literally pennies per use. When welding or soldering is out of the question due to cost, down time for repairs, or technical/environmental considerations, J-B Weld is the answer. J-B Weld is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel -- and with similar properties. Loctite Products Visit our Web site for full information about these Loctite products Loctite 222 Purple Low Strength $16.95 Threadlocker for Small Fasteners 3987 Loctite 242 Medium Strength Blue $16.95 Threadlocker 3988 Loctite 271 High Strength Red $16.95 Threadlocker 3989 Loctite 7649 Primer for Threadlockers Page 77

78 Tools & Things: Air Tools Tools & Things: Air Tools Tools & Things: Batteries 4520 Die Grinder Kit, 1/4" Air, Professional $99.95 Grade Z-Limit brand guarantees professional quality Air regulator controls speed up to 20,000 RPM Molded cushion grip and safety throttle lever 360 degree swivel air inlet. Rear exhaust, silencer gives low 79dB(a) noise level This low noise, 1/4" air die grinder features a molded ergonomic cushion grip. The air grinder has an air inlet of 1/4" NPT and uses a 3/8" hose. It requires 90 PSI and consumes 4 CFM. The overall length of the grinder is 7-3/8". This kit includes the air die grinder, five 1/4" shank mounted grinding stones of various shapes and five 1/8" shank mounted grinding stones of various shapes all in a fitted case. Batteries Batteries for the products we sell Tools & Things: Gift Certificates Tools & Things: Lights 2975 Battery, LR44 Alkaline, Set of 10 $ Battery, SR44 Silver Oxide $ Battery, AG10 Alkaline $ Battery, CR2032 Lithium $ Battery, LR44 Alkaline $ Gift Certificate, $100 $ LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and you don't need to worry about whether or not it fits Gift Certificate, $25 $ Gift Certificate, $50 $ Flashlight, LED with Magnetic Base $23.95 Flexible shaft with universal movement. Max. reach: 8". Magnetic Base: 1-1/2" diameter, 25 lbs power pull. LED flash light requires 3xAAA battery. Flexible shaft with universal movement. Max. reach: 8". Magnetic Base: 1-1/2" diameter, 25 lbs power pull. LED flash light requires 3xAAA battery Machine Light with Magnetic Base $24.95 Powerful magnetic base with On/Off switch Flexible arm for easy positioning 120 VAC power Use standard 60 W incandescent medium base bulb (not included) 3715 Machine Light, Halogen with Magnetic Base $ watt halogen bulb produces intense light 20" flexible shaft Powerful magnetic base with ON/OFF switch 2-prong 39 (1 m) power cord for 120VAC operation 3799 Halogen Bulb $ Machine Light, LED with Magnetic Base $ " flexible shaft Powerful magnetic base V Hz 330 lumens LED machine work light with magnetic base. The 20" flexible shaft combined with the magnetic base gives you the flexibility to target light directly to your work area. The LED is 330 lumens (roughly comparable to a 30 W incandescent bulb) and is rated V Hz. Tools & Things: Lubrication Tools & Things: Shims Tools & Things: Things 3015 Spindle Light, Mini Mill $69.95 This circular fluorescent light, made for a microscope, fits around the spindle on a mini mill. It provides good, even light on your work. The hole in the light is 1.85" in diameter. It fits the mini mill fine, but if you have a different mill you had better check to be sure it will fit Pump Oiler, Hard Trigger $13.95 For ball oilers (and hundreds of other uses) 6 oz. capacity Straight spout Flared bottom to prevent tipping 6 oz. oiler with a case hardened trigger to handle thicker liquids. The trigger and container are powder coated copper bronze. Straight spout. Flared bottom to prevent tipping.this is an old-timey (but brand new) pump oiler to oil all those little ball oilers. The hardened trigger means it's good for even thick machine oils as well as most types of cutting oils Shim Stock Assortment, " " Plastic 7 sheets of 5" x 5" sheets of polyester shim stock Minimal compression in use Thickness tolerances to industry standards ", 0.001", ", 0.002", 0.003", 0.004", and 0.005" Color coded shim stock sheets are made from a high quality plastic material. Easy to cut and resists oil. Non-magnetic and non-conductive to electricity. Corrosion resistant Shim Stock, " Silver Plastic $ Shim Stock, 0.001" Amber Plastic $ Shim Stock, " Purple Plastic $ Shim Stock, 0.002" Red Plastic $ Shim Stock, 0.003" Green Plastic $ Shim Stock, 0.004" Tan Plastic $ Shim Stock, 0.005" Blue Plastic $ Chip Shield, Magnetic for 3" - 4" Vise $54.95 Uses strong Neodymium magnets to mount to the front or back of a machine vise Conveniently remove without the hassle of fussing with tools or screws Adjustable friction hinges allow setting the side panels at any angle up to 150 degrees Compatible with any 3"- 4" machine vise with a flat surface on either end Approximate dimensions: 11 1/4" x 3 3/4" x 1/4" This made-in-usa chip shield is a great add-on to any 3" or 4" milling vise in your shop. This quickly attaches to a vise to provide a reliable and adjustable chip shield. It's great for fly cutting and other "messy" jobs. Use caution when placing the Chip Shield near the vise or any other metal object as the Neodymium magnets are very strong and will act to rapidly close the gap if they are unintentionally placed too close to the object. To assemble, select the side of the center panel where the magnets are flush with the surface and lay this side facedown on a flat surface. Use the supplied machine screws to attach the supplied hinges joining the center panel to each side panel. Start all 4 screws in each hinge before tightening, then tighten the screws with the hinge square to the panel, and the panels square to each other. Turn the torque adjustment screw on the hinge to the desired friction when moving the side panels Chip Shield, Magnetic for 4" - 8" Vise $ Demagnetizer $59.95 Demagnetizes tools such as dies, cutters and punches 115 VAC with on/off switch Table size: 6-3/4" x 4-1/4" Weight: 11 lbs Economy demagnetizer, table top style, good for demagnetizing tools such as dies, cutters, and punches. Page 78

79 Tools & Things: Things Tools & Things: Tools 5017 Machinist Calc Pro 2 Machinists Calculator $89.95 The first dedicated handheld machining math and reference tool Calculate speeds and feeds, right triangle solutions, bolt patterns and much more The Machinist Calc Pro 2 is the upgraded version of the original dedicated handheld machining math and reference tool which provides a complete assortment of machine shop solutions. It has more complete thread data than the Machinery's Handbook, including step-saving thread and drill size chart look-ups, speeds and feeds, right triangle solutions, bolt patterns and much more. Spend more time machining and less time looking up specs and data in books, on charts or in computer programs. New features include the ability to enter WOC (width of Cut), LOC (Length of Cut), and DOC (Depth of Cut). It also includes settings for 20 popular materials, 6 processes and 3 Tools. It also has a new larger 2-line LCD display Magnifier, 10x, Hastings Triplet $ x Magnification Triplet lens system 21mm diameter Come with case 5388 Magnifier, 8x, Desktop, LED Light $ x Magnification Flexible arm for any desired position 5" lens diameter 300 LUX (2.5 watt) LED light 110v/1 phase power supply, 60" cord 4423 Safety Glasses $9.95 Strong, lightweight clear polycarbonate lens with 11 degree base curve Treated with our exclusive Duramass scratch resistant and anti-fog coatings Non-slip rubber head grips and temple sleeve designed for breakaway cord Twin bridge adjustable nose piece The safety glasses feature safety and style at an affordable. The metal frame with spring hinge temples, 11 degree base curve lens and twin bridge adjustable nose piece keeps you at the peak of comfort and style all day long. Lightweight metal frame with extreme flexibility. Non-slip temple sleeves designed for use with breakaway cord. Twinbridge adjustable nose piece with gel nose pads. Meets or Exceeds ANSI Z87.1 Safety Standards. Always wear safety glasses when working in your shop Safety Glasses, Economy $ Safety Shield on Magnetic Base $ " x 10" (200mm x 249mm) clear plastic shield Magnetic base and locking arm allow easy placement Magnetic base dimensions: 2.6" diameter X 0.4" depth This is a great item for protecting your eyes from flying chips or coolant/cutting oil spray. The magnetic base allows you to position it on virtually any metal surface and has easy quick lock mechanisms to adjust positioning Arbor Press, 1/2-Ton $47.95 Heavy duty frame Four position anvil Steel pinion Maximum work height 4.5" Maximum work diameter 6.5" This arbor press stands 10" tall and has a 4" x 9" base Automatic Center Punch $4.95 Double spring loaded barrel. Special hardened alloy steel tip for instant marking Knurled body This punch has a lightweight, knurled handle for a positive grip and easy handling. No hammer is required! Just hold the punch in an upright position, press the handle down, and a built-in mechanism strikes a perfect center mark every time. All working parts are made of tool steel, properly hardened. Works on metal, plastics, wood and other machinable materials Automatic Center Punch, Starrett $40.00 Starrett Automatic Center Punch with adjustable stroke Starrett catalog number 18A Rugged automatic punches have all-steel handles and parts. These punches have a mechanism that automatically strikes a blow when downward pressure is applied. No hammer is required, making one hand always free to steady the work. The adjustable knurled cap regulates the force of the blow. Should a heavy mark be required, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward. The tension of the spring, which regulates the blow is constant, so marks made by the point are uniform in depth and size for each setting. The point can be easily removed for regrinding and/or replacement. All sizes are identical in style, differing only in the striking power Automatic Center Punch, Starrett $35.50 Starrett Automatic Center Punch with adjustable stroke. Starrett catalog number 818. This punch has a lightweight, knurled aluminum handle for a positive grip and easy handling. No hammer is required! Just hold the punch in an upright position, press the handle down, and a built-in mechanism strikes a perfect center mark every time. The force of the blow can be adjusted by turning the knurled cap. All working parts are made of tool steel, properly hardened. The hardened tool steel point can easily be removed for resharpening or replacement. Works on metal, plastics, wood and other machinable materials Bench Block $24.95 Made from steel; hardened and ground Handy tool for holding work, driving pins, drilling and so on Knurled edge provides a good grip V-groove accommodates round and odd-shaped objects Holes from 1/8" to 5/8" diameter This bench block is 3" in diameter and 1.5" thick Borescope, Wired with Color LCD Monitor $ and 9 mm Camera 2.4" color LCD monitor IP67 Water-proof camera with 39" flexible line Night vision feature 9mm camera head (640 x 480 resolution) This bore scope allows for easy inspections in hard to reach areas. The lightweight handheld design lets you easily find, diagnose and solve problems.features:vivid 2.4" color TFT LCD monitor allows image rotation for detailed images39" flexible gooseneck cable retains configured shapeoptional 78" flexible shaft with 9mm or 17mm camera availablemini waterproof 9mm(IP67) camera head provides on-the-spot viewingnight Vision Range: 20"Power indicator, low voltage indicatormirror buttonled brightness controllcd contrast controlpower Supply: 4 x AA batterydimension: (WxDxH) 8x3.3x2.4"Operating Temperature: 14 ~122 FWeight: 14 oz Borescope, Camera Head Extension $ Arbor Press, 1-Ton $69.95 Heavy duty frame Four position anvil Steel pinion Maximum work height 5.25" Maximum work diameter 8" This arbor press stands 13" tall and has a 5" x 11" base. Page 79

80 Tools & Things: Tools 1820 Center Punches, Starrett $37.00 Starrett Center Punches with round shanks. Set of 5, Nos. 117AA, A, B, C, D in Plastic Case Starrett catalog number S117PC. This set includes the following sizes, measured at the top of the tapered point: 1/16, 5/64, 3/32, 1/8, and 5/32 diameter. Starrett No. 117 Center Punches are made of specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS Chip Brush, 1" $0.89 Natural bristles Wood handle The brushes are great for clearing chips as well as for small painting jobs were you don't want to take the time to clean a brush Chip Brushes, 1", 36 Pieces $ Chip Brushes, 1", 6 Pieces $ Deburring Tool $2.99 This hand deburring tool has a built-in E-100 blade. The deburr tool deburs holes with a flick of the wrist Deburring Tool Set $ piece set Includes plastic handle, telescoping holder, and B10 & B20 blades Use on Plastics, Steel, Brass, Aluminum, Copper, and Cast Iron This deburring tool set comes with 2 easily swappable blades to conveniently tackle all your deburring needs. It deburs holes with a flick of the wrist Deburring Blade, B10 $ Deburring Blade, B20 $ Drive Pin Punches, Extra Long, Starrett $45.00 Set of 5 extra long 8" pin punches Includes 1/8", 3/16", 1/4", 5/16", and 3/8" punches Well proportioned, hardened, proper tempered with a knurled grip Includes vinyl case Starrett catalog number S248PC Starrett No. 248 Drive Pin Punches are extra-long, measuring 8" (200 mm). The bodies are 4-1/2" (115 mm) and the drive pin sections are 3-1/2" (90 mm) long. They are well-proportioned, hardened, properly tempered, and have a knurled grip. They are designed to withstand hard use and provide a most satisfactory punch for machine shop and motor service work. Just the punch to follow long cotter pins and the like into holes without hindrance. The diameters of the punches are slightly under the sizes listed. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS Drive Pin Punches, Starrett $56.00 Starrett 8 piece drive pin punch set. Set of 8, Nos. 565A/B/C/D/E/F/G/H in a round container. Starrett catalog number S565WB. This set includes the following diameter punches: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16". Starrett No. 565 Drive Pin Punches are well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS File Set, 12" Steel, 5 Pieces $13.95 Set Includes: Flat File, Tapered Round File, Square File, Triangular File & Half Round File Made of T12 hardened tool steel Comfortable and durable PVC handles 2891 Grinder, Proxxon IB/E Professional Rotary $ Tool Ball bearing spindle of ground steel, with lock button for rapid cutter changing Streamlined die-cast aluminum head for exact bearing seats and optimal stability Powerful 100 W motor with full-wave electronics for variable speeds between 5,000 and 20,000 RPM Complete with six triple-slit steel collets covering 1/32'' to 1/8'' ( mm) Two year limited warranty Grinder with 34 industrial quality bits & cutters with shanks Ø 3/32'' (2.3 mm). High concentricity (maximum run out.001''). This high-revving motor is usable for extended periods at a time. 120V AC, 60 Hz. The ground steel spindle runs in a ball bearing assembly, minimizing play. Six high concentricity collets sized 1/32'', 1/16'', 5/64'', 3/32'', 7/64'' and 1/8'' (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm) along with a collet nut are included. Packed in durable plastic case, complete with the 34 bits & cutters as shown above Accessory Kit for Rotary Tools, $20.75 Modelmakers 2969 Cut-Off Disks, Aluminum Oxide for Rotary $11.75 Tools, 50 Count 3033 Grinder, Proxxon IB/E Professional Rotary $ Tool 230V 2967 Grinding Wheels, Aluminum Oxide for $6.75 Rotary Tools, 10 Count 2968 Grinding Wheels, Silicon Carbide for $6.75 Rotary Tools, 10 Count 2935 Rotary Tool Mount for Mini Lathe $ Wire Brushes, Brass for Rotary Tools, 5 $11.75 Count 3562 Hacksaw Frame, Heavy Duty, Starrett $29.95 Starrett Closed Grip Heavy Duty High-Tension Hacksaw Frame Starrett catalog number K145 12" (300mm) frame 4-3/8" (110mm) throat depth The K145 is a rugged, professional quality high-tension frame constructed of cast aluminum with an extra-thick tubular steel bar for added strength. The steel tube also provides on-hand storage for spare blades. The K145 High-Tension Frame is engineered for use with Starrett bi-metal Bluestripe and Greenstripe blades. With just three 360 turns, the easy to use adjusting screw will tension the blade up to 28,000 psi (2,000kg/cm) which prevents the blade from twisting and binding when bearing down on the cut. Each K145 Heavy Duty High-Tension Frame is shipped with a Starrett Bluestripe bi-metal unique ground tooth hacksaw blade. Page 80

81 Tools & Things: Tools 5840 Handee Clamp $17.95 Attach nuts, bolts, or hose clamps in hard-to-reach places Simply put desired nut, clamp, or bolt in the Handee Clamp and tighten nut on other end to secure Made in USA The Handee Clamp is a small handheld device that firmly holds nuts, bolts and clamps. Its design allows for the placement of the item in vise like jaws that can be tightened from one end. Once secured, simply put the held item into place with one hand, freeing the other hand for actions such as tightening.the Handee Clamp will securely hold onto whatever you put in its jaws, enabling you to reach into that tight crevice so you can focus on the job at hand and not worry about dropping the hardware you need. There is no telling when the next time you'll need The Handee Clamp to help you with that "Out of Reach Grasp". For a relatively inexpensive product, it can save you hours of frustration that makes it more than worth its value Hex Wrench Set, T-Handle Ball End, Inch $48.95 Cushion grip T-handle 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" Sizes 5/32" and up have ball end Includes stand Ball end tips work at up to 25 degree angle Ball end T-handles feature welded steel handles with cushion grips sized for maximum torque while protecting the ballpoint tip and screw from rounding or stripping. The cushion grip handle is ergonomically shaped eliminating pressure points. The heavy duty handle generates flywheel effect for fast insertion and extraction of screws. Comes with a molded stand that mounts on the wall or work bench. Only available from Bondhus, Protanium steel means these are the strongest tools available. Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20% stronger than competitive tools.proguard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time Hex Wrench Set, T-Handle Ball End, Metric $ Pin Chuck Set, 0-3/32" $8.95 Holds small drills firmly Ensures complete collet length Overall length: 2-1/2" Shank size: 1/4" Includes:3 collets - capacity: 0-1/32", 1/32" - 1/16", 1/16" - 3/32" 5467 Pin Vise Set, 0-3/16" Hollow handle for long wire or rods Includes:Ranges: ",.025"-.075",.045"-.125",.110"-.187" 3881 Pin Vise, ", Starrett $ Pin Vise, ", Starrett $ Pin Vise, ", Starrett $ Pocket Level, Starrett $29.50 Starrett 3.5" pocket level Starrett catalog number 135B 3.5" (88 mm) long Satin nickel plated finish This is an extremely useful Starrett level that fits handily in the pocket with no sharp edges. Made from hexagonal stock with convex ends and satin nickel-plated finish R8 Tool Fixture $89.95 Provides a safe way to change cutting tools in R8 based tool holders. Easy assembly and installation. Mounts to the front slot of a mill table, workbench, or vise. Includes a tool caddy for quick access to frequently used tools Convenient for changing R8 based indexable-insert tooling The R8 Tool Fixture provides a platform for setting tools in any R8 compatible tool holder, and includes a tool caddy for convenient access to frequently used tools such as an air gun, wrenches, and brushes. It is handy for setting tools in quick change tool holders like the Tormach TTS System or Royal R8 System, great for setting tools in ER collets, and useful for setting tools in shell mill arbors such as a slitting saw Screwdriver Set, Precision, Starrett $55.00 Set of 7 Starrett precision jewlers' screwdrivers in a case Starrett catalog number S551Z-7 Set of 7 screwdrivers in a case Durable hardened chrome-vanadium blade/contacts The Starrett No. 551 Screwdrivers with soft-touch handle are lightweight and have a very ergonomic design, making them easy to work with. Yet the No. 551 is a rugged product. The blade/contacts are made of chrome-vanadium, molybdenum steel, hardened and chrome-plated, allowing them to hold up well in the toughest applications. Soft-touch handles are tapered and proportioned to blade for rapid rotation and spin-free finger control cap provides precise turning and control Flat Blade widths are:.060"/1.5mm,.080"/2.0mm,.100"/2.5mm,.120"/3.0mm Three Phillips blades: #00, #0, and #1 The precision-machined tips are top quality for an exact fit Stamp Set, Numbers and Letters, 3/16" Numbers (0-9) & Letters (A-Z) Hardened to RC at tip and tempered to RC 41 Rockwell at striking end. Made from carbon steel. Character style designed to give sharp clear impressions. Packed in a durable box for easy selection and storage. 3/16" Number & Letter Stamp Set and A-Z Hardened to RC at tip and tempered to RC 40 Rockwell at the striking end. Made from carbon steel. Character style is designed to give sharp clear impressions. Packed in a durable box. Easy selection and storage. Torx Wrenches, Flag Style Molded Flag Style Handle with spinner top This is a great replacement torx wrench for many indexable turning tool sets that use torx screws. The flag style Torx wrench is designed to prevent overtightening of insert retaining screws Torx Wrench, T-6 $ Torx Wrench, T-8 $ Torx Wrench, T-9 $ Torx Wrench, T-10 $ Torx Wrench, T-15 $1.95 Page 81

82 Tools & Things: Tools Tools & Things: Workwear Tools & Things: X-Y Tables Videos and Books: CNC Books Torx Wrenches, Flag Style, Wiha Molded Flag Style Handle with spinner top Made of High Performance CRM 72 Tool Steel Hardened Oxide Finish Made In Germany This is a great replacement torx wrench for many indexable turning tool sets that use torx screws. The flag style Torx wrench is designed to prevent overtightening of insert retaining screws Torx Wrench, T-5, Wiha $ Torx Wrench, T-6, Wiha $ Torx Wrench, T-7, Wiha $ Torx Wrench, T-8, Wiha $ Torx Wrench, T-9, Wiha $ Torx Wrench, T-10, Wiha $ Torx Wrench, T-15, Wiha $ V-DrillGuide Hand Drill Guide for Inch $27.50 Drills Drill guide is sized for drill bit sizes: 1/8" to 3/8" 17 drill sizes 1/64" increments Special nickel alloyed steel heat treated for durability V-DrillGuide Hand Drill Guide by Big Gator Tools is like a portable drill press for precision alignment.the V-groove along the bottom of the guide allows for perpendicular alignment with all drill sizes on round parts or corners. The image shows both the top and bottom of the guide. The bottom surface is precision ground to assure stability and accurate perpendicular alignment on flat surfaces V-DrillGuide Hand Drill Guide for Metric $27.50 Drills 3968 Shop Apron $ pockets designed for metalworking tools We had these aprons custom-made to our design out of heavyduty denim X-Y Table Assembly $ This small precision X-Y table can be used on a drill press or other machine to precisely locate your workpiece. The table is 90 mm (3.54") by 200 mm (7.87"). It has three 8 mm T-slots. The complete X-Y Table assembly is 10.15" wide, 8.5" deep and 2.5" high. The X-axis travel is 135 mm (5.31") and the Y-axis travel is 70 mm (2.76"). The height of the table is 60 mm (2.36"). The base is 100 mm (3.94") by 175 mm (6.89"). The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050". The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes. CNC Books CNC Books for the machinist. Visit our Web site for a full description of these titles Automated Machines and Toolmaking $ CNC Trade Secrets $32.95 Videos and Books: Machinist Books Machinists Books Videos and Books: Other Books How-to guide books for machinists Visit our Web site for a full description of these titles Home Machinist's Handbook $ Machine Shop Basics $ Machine Shop Essentials: Questions & $44.95 Answers 3867 Machine Shop Know-How $ Machine Shop Practice, Vol. 1 $ Machine Shop Practice, Vol. 2 $ Machine Shop Tools and Operations $ Machine Shop Training Course, Vol. 2 $ Metalworking Sink or Swim $ Basic Lathework for Home Machinists $ Machine Shop Methods $ Machine Shop Trade Secrets, Second $49.95 Edition 5180 Machining for Hobbyists: Getting Started $ Metal Lathe for Home Machinists $ Metalworking - Doing It Better $ Milling for Home Machinists $ Mini-Lathe for Home Machinists $ South Bend Lathe Booklets $ The Care and Operation of a Lathe $ The Metalworker's Workshop For Home $14.99 Machinists 4737 The Milling Machine for Home Machinists $ Tool & Cutter Sharpening for Home $12.95 Machinists 4591 Turning Precision Tapers on Your Mini $29.95 Lathe 5102 Useful Machine Shop Tools to Make $14.99 Other Books Other types of books for the machinist Visit our Web site for a full description of these titles Tools & Rules for Precision Measuring $ Backyard Foundry for Home Machinists $ The Machinist's Cookbook $ Welding Know-How $49.95 Videos and Books: Reference Books Reference Books Reference books for the machinist Visit our Web site for a full description of these titles Basic Machining Reference Handbook $ Machinery's Handbook 30th Edition, $ Toolbox Size 4996 Engineers Precision Data Pocket Reference $ Metalworker's Data Book for Home $14.95 Machinists 1953 Shop Reference for Students & $29.95 Apprentices Page 82

83 Videos and Books: Users Guides Videos and Books: Users Guides User Guides Videos and Books: Videos Users guides for the machines we sell as well as some others These are all available for free download on the Support menu. Visit our Web site for a full description of these titles Mini Lathe Users Guide $ Mini Mill Users Guide $ Users Guide, HiTorque Bench Lathe, 3536 $5.95 & Users Guide, HiTorque Micro Mill, 2MT, $ Users Guide, HiTorque Micro Mill, ER-16, $ Users Guide, HiTorque Mini Lathe, 4100 & $ Users Guide, HiTorque Mini Mill, Solid $5.95 Column with Air Spring, Users Guide, HiTorque Mini Mill, Solid $5.95 Column, Users Guide, HiTorque Mini Mill, Tilting $5.95 Column, Users Guide, KX1 Milling Machine, 3501 $ Users Guide, KX3 Milling Machine, 3503 $ DVD: Grinding Tool Bits and 5/16" Tool Bits $45.90 Lathe Tool Sharpening DVD 10 Lathe tool bits, 5/16" Square 2-1/2" Long M2 HSS This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe cutting tools and other grinding tasks. Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel. Produce a 60 degree threading tool that is as good as any commercially available threading tool bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills and get many more hours of work out of them. Regrind screw driver tips to keep them from slipping off screw heads. Grinding is an art that can take months or years to fully master but with the right grinder and a bit of patience, you will be able to produce perfect results right in your shop DVD: Grinding Tool Bits and 1/4" Tool Bits $ DVD: Grinding Tool Bits and 3/8" Tool Bits $ DVD: Setting up a CNC Mill $19.95 By Ron Ginger Covers installation and setup for the LittleMachineShop.com 3501 CNC Mill Covers troubleshooting and options Approximately 68 minutes Everything you need to know about setting up your LittleMachineShop.com 3501 CNC milling machine. This DVD walks you through selecting a PC, installing Mach3 and configuring it properly, and on up to cutting a part with your new 3501 CNC milling machine DVD: Sherline Lathe Basics $49.95 How to set up and operate the Sherline lathe Sherline Lathe Basics gives a great introduction to using the Sherline lathe. Topics covered include turning, facing, boring, workholding, eccentrics, tapers, threading, tool bit grinding, backlash, setting tool height, cleaning a chuck, hand wheel dial adjustment, using the follower rest, mounting the lathe aligning the headstock and milling. Approximate running time: 213 minutes DVD: Shop Secrets, Volume 1: Measuring $39.95 Tools Teaches you to operate and maintain precision measuring equipment Easy-to-understand words, diagrams, and three-dimensional graphics explain operation of the tools Covers equipment that even experienced machinists may not know how to operate Shop Secrets, Volume 1 Is a two-hour video on the use and care of machinist measuring tools and related machine shop operations. Produced for the beginning machinist, this video is in use at technical high schools in the US and in industry both in the US and the Far East. Topics include adjustable parallels, backlash, calipers, combination squares, optical comparator, dial indicators, edge finders, left-handed lead screw operation, micrometers, precision squares, radius gages, shop safety, small hole gages, thread gages, telescoping gages, thread pitch gages, vernier scales, vision assists, wigglers, steel rules. Running time: 1:52 hours. Jose Rodriguez Videos Jose Rodriguez publishes in depth videos about bench top machining. Visit our Web site for a full description of these videos DVD: 7x10 Variable Speed Mini Lathe $43.00 Operations 2566 DVD: Advanced Taig Micro Lathe $43.00 Operations 2564 DVD: Basic Taig Micro Lathe Operations $ DVD: Build a Milling Machine $ DVD: Building a Spindle Gauge for the Mini $33.00 Lathe 2396 DVD: Grinding Tool Bits and Other Things $ DVD: Make a Miniature Boring Head $ DVD: Making Gears the Easy Way $ DVD: Milling on the Drill Press $ DVD: The Milling Machine and its Uses $ DVD: Threading on the Lathe $ DVD: Basic Indicating Practices for $28.00 HiTorque Mini Lathes and Mini Mills 5344 DVD: Basic Operations On The HiTorque $18.00 Mini Mill 4649 DVD: Basic uses for Dividing Instruments $25.00 for the Mill 4518 DVD: Basic Vise Work Holding Techniques $20.00 for the Mini Mill 4421 DVD: Cutting Balls & Radiuses on the Lathe $ DVD: HiTorque 7x12 Mini Lathe Basic $39.00 Operations 4514 DVD: Introduction to the HiTorque Mini $20.00 Mill 4743 DVD: Introduction to the Model 4100 $20.00 HiTorque Mini Lathe 4635 DVD: Introduction to the Nano Lathe- $15.00 Drillpress-Mill 4519 DVD: Locating Edges and Coordinates with $20.00 the Edge Finder and Wiggler 4440 DVD: Mini Lathe Advanced Operations, $39.00 Vol. 1 Ron Takayama Videos Ron Takayama has created some videos that show you how to build some great projects. You get video instructions and complete plans on the DVD DVD: Building a Horizontal Steam Engine $ DVD: Building a Vertical Boiler $ DVD: Building an Overcrank Steam Engine $ DVD: Building a Crosshead Overcrank $19.95 Steam Engine Page 83

84 Videos and Books: Videos Vises: Accessories Vises: Milling Vises SwarfRat Videos SwarfRat provides the hobby machinist with top-notch instruction that is both easy to understand and enjoyable to watch. They take the subject of metalworking and break it down into easily understood lessons; lessons that are chock-full of oncamera demonstrations, on-screen charts, animations, and 3-D computer simulations, all designed to make sure you can visualize and understand the concepts and techniques. Our lesson format is good for those of you who have some experience too; you can pick just the topics you need a little help with. Visit our Web site for a full description of these videos DVD: Building the Oscillating Cylinder $26.95 Steam/Air Engine 3111 DVD: Cutting Threads on the Mini Lathe $ DVD: Edge Finding and Location $ DVD: Lathe Fundamentals & Basic Turning $ DVD: Mill & Lathe Spindle and Gearbox $24.95 Repair 2884 DVD: Milling, Flycutting & Dovetailing $ DVD: Mini Machines 101 Complete Mill $ Series 2324 DVD: Mini Mill Basics, Clamping & Fixtures $ DVD: Precision Drilling, Reaming & Tapping $ DVD: Teardown, Tuning & Tramming $ DVD: The Boring Head: Bores, Arcs, $24.95 Saddles & More 3406 DVD: The Rotary Table $ DVD: The Vise Squad - Precision $19.95 Workholding and Measuring Techniques 2927 DVD: Toolmaking & Restoration $ DVD: Work Holding on the Mini Lathe $24.95 Vise Comparison See the vise comparison chart at Swivel Base, 3" Precision Milling, Heavy $19.95 Detachable swivel base features easy to read divisions Ground top and bottom This swivel base fits our 3" Precision Milling Vise, Heavy 2239 Swivel Base, 4" Precision Milling, Heavy $26.95 Detachable swivel base features easy to read divisions Ground top and bottom This swivel base fits our 4" Precision Milling Vise, Heavy 1647 Vise, 3" Milling $64.95 Jaw width 3.15" (80.0 mm) Jaw Depth 1.18" (30.0 mm) Swivel Base This 3" milling vise is good for general mill work Vise, 3" Precision Milling $ Vise, 3" Precision Milling, Heavy, No $99.95 Swivel Base Precision 3" Kurt-style milling machine vise No swivel base Hardened replaceable jaws The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are hardened and ground, and can be mounted on either end of the fixed and movable jaw providing a wide range of clamping distances.overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within " in 4" Vise, 3" Precision Milling, Heavy, With $ Swivel Base Precision 3" Kurt-style milling machine vise Detachable swivel base features easy to read divisions Hardened replaceable jaws The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground Precision Milling Machine Vise: 3 Kurt-style milling vice with detachable 360 swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.overall length is and the height is 3.05 without base, and 4.21 with base. Jaws are 3.15 wide, 1.04 deep, open 3, and are perpendicular to the ways within in 4. The ways are parallel to the base within in 4 without the swivel Jaws, 3" Precision Milling Vise $ Jaws, 4" Precision Milling Vise $ Soft Jaws, 3" Vise $ Soft Jaws, 4" Vise $ Vise Mounting Kit, 1/2" T-Slot $ Vise Mounting Kit, 3/8" T-Slot $ Vise Mounting Kit, 7/16" T-Slot $ Vise, 4" Precision Milling, Heavy, No $ Swivel Base 1755 Vise, 4" Precision Milling, Heavy, With $ Swivel Base 1504 Vise, 4" Precision Milling, Heavy, With $ Swivel Base - CLOSEOUT 4740 Vise, 3" Precision Milling, Professional $ Grade Totally enclosed heat treated screw High repeatability Detachable swivel base features easy to read divisions Hardened jaws This is a very well-made precision 3" Kurt-style milling machine vise with a swivel base.the top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.the jaws are hardened and ground.the detachable swivel base features easy to read divisions.the replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances Vise, 4" Precision Milling, Professional $ Grade 3951 Vise, 5" Precision Milling, Professional $ Grade Detachable swivel base 360 degree rotation Ground and hardened jaws Precision 3" Kurt-style milling vise with swivel base.the top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.the jaws are hardened and ground.the detachable swivel base allows 360 degree rotation of the vise Vise, 3" Precision Milling Plus Parallels $ and Mounting Kit Page 84

85 Vises: Milling Vises Vises: Other Vises 3857 Vise, 4" CNC Mill $ Lock down type Compact size allows multiple vises on CNC mill table Flatness of all sides within 0.001" Mount upright, or on left or right sides Sides parallel within " in 4" This vise is designed for CNC milling machines where a swivel base is never required. The compact size allows you to mount multiple vises on the CNC mill table so you can machine several items in one setup. The vise closes with up to 3000 lbs. of clamping force. The vise is 4.13" wide, 11.25" long, and 4" tall. The jaws are 1.5" deep and open 4" Vise, 3" CNC Mill $ Vise, 5" CNC Mill, Tormach $ Lock down type Compact size allows multiple vises on CNC mill table Flatness of all sides within 0.001" Mount upright, or on left or right sides Sides parallel within " in 4" A versatile and compact 5" CNC Vise that can be mounted upright or on either side. Includes a Bridge Clamp for compact side by side mounting up to 3 vises on the PCNC 1100 or 2 vices on the PCNC 770. Also features 6 tapped holes for mounting to base plate or trunnion. Vise includes economy cast steel handle, not shown here Vise, 2.5" Drill Press $19.95 Cast iron construction Vertical and horizontal V-grooves in fixed jaw 2.5" jaw opening 2.5" jaw width 1.5" jaw depth 4139 Vise, 1.5" Drill Press $16.95 Vises: Screwless Vises 1590 Vise, 3" Screwless $65.95 This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc All sides are flat, square and parallel to ". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects.the jaws are 1.38" deep and open to 3.78" capacity.the vise is 7.28" long, 2.76" tall and 2.875" wide Clamps, Screwless Vise $ Vise, 1" Screwless, Built-in Parallels $ Vise, 1" Screwless, Square Jaws $ Vise, 1.5" Screwless $ Vise, 2" Screwless $ Vise, 2" Screwless with 3" Thin Parallels $ Vise, 3" Screwless plus Parallels and $ Mounting Clamps 2356 Vise, 3" Screwless with Clamping Slots $ Vise, 3" Screwless with Hold Down Clamps $ Vise, 3" Sine Screwless $ Sine range: 0-60 Hardened and precision ground Tolerance of.0004" Jaw can be opened or closed without unbolting from work surface 3" Precision screwless sine vise.jaw width is 3.15", jaw depth is 1.25", jaw opening is 4".The base size is 7.638" x 3.15".The center distance of the cylinders is 4.000".Hardened and precision ground to a tolerance of.0004 for both parallelism and squareness. Sine range: Jaw can be opened or closed without unbolting vise from work surface Space Block Set $ Vise, 3" Sine Screwless & Space Block Set $ Vise, 3" Drill Press Quick Slide $ " wide jaws 1/2" slot for mounting Precision ground Jaw depth 1" With this quick-slide vise for your drill press, you slide the jaws against your workpiece and lock it into place with the lever for a secure hold. The 1/2-inch slot allows the vise to be mounted to nearly any machine table using common T-slot clamps. Made of high grade stress-relieved iron casting Vise, 3.5" Tilting, 0-90 Degree $46.95 Full 90 horizontal to vertical adjustment Multiple bolt slots in base for easy mounting Angle dial on one side and locking knob on opposite side The jaws are 3.5" wide, 1.25" deep, and open to 3.25" capacity.the front and rear slots are 0.5" wide. The corner slots are 0.4" wide Vise, 4-1/2" Bench $65.95 Rugged 30,000-PSI body castings Built-in pipe jaws Locking swivel base Wilton -type vise with 4-1/2" jaws that open up to 4" Anvil work surface Rugged 4 1/2" bench vise with locking swivel base. Can be bolted to bench. Jaws are grooved for holding pipe. Large anvil work surface Vise, Universal Movement $ This fixture is composed of two parts; a precision vise and a swivel angle plate base Vise revolves 360 horizontally with 3 engraved graduations and 45 vertical with 3 engraved graduations Hex wrench included for locking vise at any position Vertical angle can be adjusted with fine adjustment knob Hardened and precision ground parallel and square within Unique universal movement for precision grinding, machining, boring and other applications Page 85

86

87 LittleMachineShop.com Order Form Purchaser Name Address Ship to (if different) Name Address Phone Phone Fax I would like to receive occasional announcements of sales and new products by . Qty Part number Description Unit price Total Subtotal Shipping & handling (see table below) California residents add 7¼% sales tax Total Shipping & Handling: Less than $25.00 $7.00 $25.00 to $49.99 $9.00 $50.00 to $74.99 $10.00 $75.00 to $99.99 $11.00 $ to $ $12.50 $ to $ % of subtotal $ or more 6% of subtotal Ground service to US addresses only. Contact us for rates for other services and destinations. Web Mail Phone Card Number Expiration Date For next-day shipping and secure credit card payment, place your order on our web site: Mail your order with your credit card information or a check to: LittleMachineShop.com 396 W Washington Blvd Ste 500 Pasadena CA Call us at or to place your order.

88 The premier source of tooling, parts, and accessories for bench top machinists. 396 W Washington Blvd #500 Pasadena, CA PRSRT STD US POSTAGE PAID PASADENA, CA PERMIT #648