South Bend Lathe Co. P.O. Box 2027, Bellingham, WA U.S.A. PHONE: (360)
|
|
- Dennis Murphy
- 6 years ago
- Views:
Transcription
1 South Bend Lathe Co P.O. Box 2027, Bellingham, WA U.S.A. PHONE: (360) ***For Immediate Release ~ January, 2015*** Introducing the New South Bend Model SB1007 Heavy 10 Lathe OPTIONAL MODEL SB1035 STAND IS MADE IN USA! Remarkable Features (see attached sheet for specifications): 2 HP, 220V, two-speed, 3-phase motor that operates from a 220V single-phase power supply, using a heavy-duty 3 HP Delta VFD inverter to ensure smooth, consistent torque at every speed " Swing over bed and 30" distance between centers. Hardened and ground South Bend signature three V-way bed. Outboard spindle spider for gunsmithing. Ultra-reliable quick-change gearbox. D1-4 Camlock spindle with MT#5 taper, 1.358" bore, and 8 speeds ( RPM). Includes high-precision 3-jaw chuck, 4-way tool post, and MT#3 tailstock with 3.125" barrel travel. See the attached machine specifications page for complete information on this machine. For more information, contact the South Bend Lathe Co. through inquiries can be sent to sales@southbendlathe.com. A Tradition of Quality With Hundreds of Thousands of Lathes Sold Since 1906
2 Heavy 10 Lathe at a Glance ULTRA-RELIABLE QUICK-CHANGE GEARBOX TIMING BELT FOR RELIABLE, NON-SLIP POWER TRANSFER OUTBOARD SPINDLE SPIDER FOR GUNSMITHING LONG 3.125" BARREL TRAVEL VERSATILE, T-SLOTTED CROSS-SLIDE & 4-WAY TOOL POST EXTRA-LONG CHROMED TAILSTOCK LOCK HANDLE
3 Model SB1007 Heavy 10 10" x 30" Gearhead Lathe Product Dimensions Weight lbs. Width (side-to-side) x Depth (front-to-back) x Height x 28-1/2 x 22 in. Footprint (Length x Width) /2 x 8-3/8 in. Shipping Dimensions Type... Wood Slat Crate Content... Machine Weight lbs. Length x Width x Height x 34 x 30 in. Must Ship Upright... Yes Electrical Power Requirement V, Single-Phase, 60 Hz Full-Load Current Rating A Minimum Circuit Size... 15A Connection Type... Cord & Plug Power Cord Included... Yes Power Cord Length... 6 ft. Power Cord Gauge AWG Plug Included... Yes Included Plug Type Switch Type... ON/OFF Switch w/lockout Key Inverter Type... Delta VFD022E21A Motors Main Type... TEFC Horsepower... 2 HP Phase... 3-Phase Amps A Speed RPM Power Transfer... Belt Drive Bearings... Shielded & Permanently Sealed Model SB1007 Page 1 of 3
4 Main Specifications Operation Info Swing Over Bed /4 in. Distance Between Centers in. Swing Over Cross Slide /8 in. Swing Over Saddle /4 in. Maximum Tool Bit Size... 1/2 in. Compound Travel... 4 in. Carriage Travel /8 in. Cross Slide Travel /8 in. Headstock Info Spindle Bore in. (34.5 mm) Spindle Taper... MT#5 Number of Spindle Speeds... 8 Spindle Speeds RPM Spindle Type... D1-4 Camlock Spindle Bearings... Tapered Roller Spindle Length /8 in. Spindle Length with 3-Jaw Chuck /16 in. Tailstock Info Tailstock Quill Travel /8 in. Tailstock Taper... MT#3 Tailstock Barrel Diameter in. Threading Info Number of Longitudinal Feeds Range of Longitudinal Feeds in./rev. Number of Cross Feeds Range of Cross Feeds in./rev. Number of Inch Threads Range of Inch Threads /2 128 TPI Number of Metric Threads Range of Metric Threads mm Dimensions Other Bed Width... 7 in. Carriage Leadscrew Diameter mm Leadscrew TPI TPI Carriage Leadscrew Length in. Feed Rod Diameter mm Carriage Handwheel Graduations in. (0.2 mm) Carriage Handwheel Revolution in. (19 mm) Cross Slide Handwheel Graduations in. (0.04 mm) Cross Slide Handwheel Revolution in. (4 mm) Compound Handwheel Graduations in. (0.025 mm) Compound Handwheel Revolution in. (1.25 mm) Tailstock Handwheel Graduations in. (0.05 mm) Tailstock Handwheel Revolution in. (2 mm) Optional Stand... SB1035 Model SB1007 Page 2 of 3
5 Construction Base... Cast Iron Headstock... Cast Iron End Gears... Hardened Steel Bed... Hardened & Ground 3 V-Way Cast Iron Body... Cast Iron Paint Type/Finish... Urethane Fluid Capacities Headstock Capacity qt. Headstock Fluid Type... ISO VG32 (eg. Grizzly T23963, Mobil DTE Light) Gearbox Capacity qt. Gearbox Fluid Type... ISO VG32 (eg. Grizzly T23963, Mobil DTE Light) Other Country of Origin... Taiwan Warranty... 1 Year Serial Number Location... ID Label ISO 9001 Factory... No CSA, ETL, or UL Certified/Listed... Yes Features Signature South Bend 3 V-Way Bed 2-Speed Motor with Inverter for Single-Phase Power Supply All Gearhead Headstock 4-Way Tool Post Spindle Spider Included for Gunsmithing Quick-Change Gearbox for Cutting Inch and Metric Pitches Carriage and Cross Slide Power Feed Thread Dial Indicator 3HP Delta VFD-EL Inverter Model SB1007 Page 3 of 3
16" X 60" EVS TOOLROOM LATHES
16" X 60" EVS TOOLROOM LATHES MODEL SB1014-220V MODEL SB1015-440V SPECIFICATIONS Hundreds of Thousands of Lathes Sold With a Tradition of Quality Since 1906! March, 2010 by South Bend Lathe Co. For Machines
More informationHAFCO METALMASTER AL-960B. Centre Lathe. 305 x 925mm Turning Capacity. Product Brochure
Product Brochure L237 HAFCO METALMASTER AL-960B Centre Lathe 305 x 925mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-09-19 L237.pdf Head Stock
More informationHAFCO METALMASTER AL-960B. Centre Lathe. 305 x 925mm Turning Capacity. Product Brochure
Product Brochure L237D HAFCO METALMASTER AL-960B Centre Lathe 305 x 925mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-09-19 L237D.pdf 2 Axis DRO
More informationOPTIMUM TU-3008G. Opti-Turn Bench Lathe. 300 x 700mm Turning Capacity. Product Brochure
Product Brochure L691 OPTIMUM TU-3008G Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-30 L691.pdf Right Front
More informationHAFCO METALMASTER AL-335. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L183 HAFCO METALMASTER AL-335 Centre Lathe 300 x 910mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L183.pdf Headstock Speed
More informationPrecision & Heavy Duty Machining
High Speed Precision Lathes Large capacity, Powerful, Universal & Precision ATRUMP 18, 21 and 25" Series Lathes have just the right amount of engineering to afford simplicity of operation, coupled with
More informationHAFCO METALMASTER AL-336. Centre Lathe. 300 x 900mm Turning Capacity. Product Brochure
Product Brochure L682 HAFCO METALMASTER AL-336 Centre Lathe 300 x 900mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L682.pdf Headstock Metric
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More informationHAFCO METALMASTER AL-335F. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L681 HAFCO METALMASTER AL-335F Centre Lathe 300 x 910mm Turning Capacity Page 1 of 6 Front View Left View Headstock Spindle Speed Levers Control Panel Switches Feed and Thread Gearbox
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand Ex GST Inc GST $5,690.00 $6,259.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More informationOPTIMUM TU-2506V. Opti-Turn Bench Lathe. 250 x 550mm Turning Capacity. Product Brochure
Product Brochure L689 OPTIMUM TU-2506V Opti-Turn Bench Lathe 250 x 550mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-30 L689.pdf Front View
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationTU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox
TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):
More informationOpti-Turn Lathe & Mill Drill Combination Package Deal
Product Brochure K146 OPTIMUM TU-2506V-16M Opti-Turn Lathe & Mill Drill Combination Package Deal 250 x 550mm Page 1 of 7 Front View Lathe Toolpost Removed For Milling Application Left View Without Toolpost
More informationC SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG
TURNING PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. HIGH SPEED
More informationCL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost
CL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost Ex GST Inc GST $9,490.00 $10,439.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance
More informationQLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm
QLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm Please Call ORDER CODE: K8710D NSW Contract No.: ~ QLD Contract No.: MODEL: Digital Readout: ~ Schools/TAFE
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationCatalog No. 71. Hundreds of Thousands of Lathes Sold With a Tradition of Quality. Since 1906!
Catalog No. 71 Hundreds of Thousands of Lathes Sold With a Tradition of Quality Since 1906! THE HISTORY OF SOUTH BEND LATHE CO. South Bend Lathe Works was founded in 1906 by Irish twin brothers John and
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationMODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
More informationPARTS. For Machines Mfd. Since 02/16. Model SB1007 PARTS. Headstock
-68- Headstock 1 2 3 4 5 6 7 8 9 9-1 11 12 15 15-1 15-2 16 16-1 16-2 16-2 17 18 19 20 21 17-1 21-1 22 23 24 25 92 27 28 29 30 31 32 33 34 35 36 26 37 38 39 40 41 42 43 44 45 46 51 52 53 54 55 56 56 57
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationTU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds
TU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $1,150.00 $1,265.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More informationMODEL G0791 COMBINATION GUNSMITHING LATHE/MILL
MODEL G0791 COMBINATION GUNSMITHING LATHE/MILL OWNER'S MANUAL (For models manufactured since 9/15) COPYRIGHT MAY, 2015 BY GRIZZLY INDUSTRIAL, INC., REVISED MAY, 2017 (BL) WARNING: NO PORTION OF THIS MANUAL
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More informationTU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $ $908.50
TU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $790.00 $908.50 ORDER CODE: L685 MODEL: TU-1503V Swing Over Bed (mm): 150 Distance Between
More informationMODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT The Model G0632Z is the same machine as the Model G0632 except it has a higher full-load current rating, a different inverter and inverter
More informationSECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
More informationCustomer Service #: (570) 546-9663 To Order Call: (800) 523-4777 Fax #: (800) 438-5901 Weight... 1261 lbs. Length/Width/Height...71-1/2 x 26 x 52-1/2 in. Foot Print (Length/Width)... 71 x 22 in. Type...
More informationHEAVY 10 10" X 30" GEARHEAD LATHE
HEAVY 10 10" X 30" GEARHEAD LATHE MODEL SB1007 Shown with Optional SB1035 Stand OWNER'S MANUAL 177335 Copyright April, 2016 November, by South Bend 2014 Lathe Co. For For Machines Mfd. Since 11/14 2/16
More informationHeadstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION
For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationSECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationMachining Technology Equipment Purchases
Allegany College of Maryland Machining Technology Equipment Purchases Equipment Specifications Michael Chronister 11-8-2018 Michael Chronister Advanced Manufacturing Project Manager 12401 Willowbrook RD
More information20" WOODTURNING LATHE Model 3520A
20" WOODTURNING LATHE Model 3520A Instruction Manual & Parts List M-0460221 (800) 248-0144 www.powermatic.com SPECIFICATIONS: 3520A Lathe Table with standard extensions... 28 x 38 Distance Between Centers...
More informationJET TURNING. Bench Lathes Geared Head Engine Lathes Large Spindle Bore Lathes Accessories... 48
Bench Lathes.................................. 37 Geared Head Engine Lathes...................... 42 Large Spindle Bore Lathes....................... 44 Accessories................................... 48
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationEngineered for Education
Engineered for Education 600 UK s range of education lathes and workholding equipment gives you exceptional ease of use and a huge choice of optional and ancillary equipment. This guarantees top of the
More informationHeavy-duty metal working machines
F O C U S O N M E T A L Special issue: offshore marine Heavy-duty metal working machines version 2014-1 Bandsaws - mitre art.no. 16488 BMSY 540 CGH Sawing capacity 30 round 540 mm Sawing capacity 30 rectangular
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationUniversal Heavy-Duty Lathe DL E Heavy. 5.1 spindle bore, large turning diameter and center widths up to
Universal Heavy-Duty Lathe 5.1 spindle bore, large turning diameter and center widths up to 315 Including 3-axis position indicator 29,5 Hp motor Workpiece weight up to 22 lbs Max. turning diameter over
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationMODEL SB1039F 14" X 40" LATHE 220V w/dro. Manual Insert. The Model SB1039F Lathe is the same machine as the Model SB1039 except for the following:
MODEL SB1039F 14" X 40" LATHE 220V w/dro Manual Insert PHONE: (360) 734-1540 www.southbendlathe.com The Model SB1039F Lathe is the same machine as the Model SB1039 except for the following: Added a 2-Axis
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 115 inch Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More information~~---":..., - "',--::_- ~A"'"~
~~---":..., - "',--::_- ~A"'"~ Lathe Features To provide the quality and durability that CLAUSING owners expect, these lathes are engineered to the highest standards of performance, and are manufactured
More informationMULTI-FUNCTION CNC LATHE FCL-18/21/25/26 SERIES
MULTI-FUNCTION CNC LATHE FCL-18/21/25/26 SERIES 1 MULTI- UNCTION MACHINE FEATURES F CNC LATHE A Combination of a High Precision Manual Lathe. A Lathe with Digital Readout. A Lathe with Powerfeed and Jog
More informationTechnic al Datasheet. Engine lathe C-Turn. The machine is equipped with a digital 3-axis readout as standard
Engine lathe C-Turn The machine is equipped with a digital 3-axis readout as standard Available with stepless spindle speed & Constant Surface Speed (CSS) feature up to 3100 rpm Technic al Datasheet KAAST
More informationFLAT BED CNC LATHE. The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available!
FLAT BED CNC LATHE The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available! Safe, Easy Operation And High Performance Are The Result Of Ingenuity And Quality Workmanship The extended
More informationSECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
More informationTHE 4224B WOODWORKING LATHE POWERMATIC.COM
THE WOODWORKING LATHE POWERMATIC.COM POWERMATIC.COM TURN YOUR PASSION INTO SOMETHING BIGGER At Powermatic, any time we build a new machine, the word that we always keep at the top of our mind is passion.
More informationSECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationMODEL M " X 36" GUNSMITHING LATHE OWNER'S MANUAL (FOR MODELS MANUFACTURED SINCE 1/15)
MODEL M1112 12" X 36" GUNSMITHING LATHE Phone: (360) 734-3482 Online Technical Support: tech-support@shopfox.biz COPYRIGHT NOVEMBER 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED SEPTEMBER, 2017 (MN) WARNING:
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationE M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM Introducing NEW ZH Geared Head Large Spindle Bore Lathes The new JET ZH lathes combine the best features of our top line manual lathes with
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationOPERATOR S MANUAL BENCH LATHE MODEL: BT1337G BOLTON TOOLS 1136 SAMUELSON ST. CITY OF INDUSTRY, CA 91748
OPERATOR S MANUAL BENCH LATHE MODEL: BT1337G BOLTON TOOLS 1136 SAMUELSON ST. CITY OF INDUSTRY, CA 91748 Many thanks for purchasing our BT1337G - Bench Lathe. Before operating, make sure you study the manual
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More information.com. More than a machine. Power your life. Operating Manual
Operating Manual Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical good solutions and convince by an outstanding price
More informationV-Turn 410. V-Turn 410. CNC Precision Lathes. incl. 3-axis position indicator and integrated spindle speed indicator, completely assembled
CNC Precision Lathes incl. 3-axis position indicator and integrated spindle speed indicator, completely assembled center width 1000 / 1500 mm max. turning diameter over bed 410 mm infinitely variable spindle
More information1640DCL Digital Control Lathe
1640DCL Digital Control Lathe MACHINE SPECIFICATIONS Multiple Function CNC Lathe 1. Manual Hand wheel Operation 2. CNC G-Code Operation 16.1 swing over bed, 8.6 swing over cross-slide 2.05 diameter hole
More informationPrecision in Every Dimension V-Series 4-Way Precision Lathe with Automated Cycles
Precision in Every Dimension V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Tool Room Lathes / Semi-Cycle Controlled Lathes Cycle-Controlled Lathes CNC Lathes Radial Drilling Machines
More informationM910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres $4, $4, Product Brochure For W685. Features.
M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: W685 MODEL: M910 Swing Over Bed (mm): 520 Between Centres (mm): 975 Spindle Nose Thread:
More informationIntroduction to Machining: Lathe Operation
Introduction to Machining: Lathe Operation Lathe Operation Lathe The purpose of a lathe is to rotate a part against a tool whose position it controls. It is useful for fabricating parts and/or features
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationAs a leader in CNC metal cutting machines, Ganesh also recognizes the distinct advantages manual machines can offer many job shops.
As a leader in CNC metal cutting machines, Ganesh also recognizes the distinct advantages manual machines can offer many job shops. That s why our line of manual lathes and mills are built to the same
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationSpecifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
More informationTurret Milling Machine Geared Head Horizontal - Vertical
Product Brochure M163D HAFCO METALMASTER HM-52G Turret Milling Machine Geared Head Horizontal - Vertical (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without
More information(?'7 7 FARREL. Bulletin 1218-B ROLL-TURNING LATHES FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y.
(?'7 7 FARREL Bulletin 11-B ROLL-TURNING LATHES FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y. r Tracercontrolled lathe Installation view of 6 " lathe, shown turning a 51 % " x 10" blooming
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
More informationSECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
More informationWOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron
01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for
More informationEMCOMAT 14S/14D 17S/17D 20D
[ ] E[M]CONOMY means: Mastering big challenges with a small machine. EMCOMAT 14S/14D 17S/17D 20D Universal lathe with toolmaker precision for industrial use EMCOMAT 14S/14D [ Digital display] - 3-axis
More informationMODEL SB1052F TURN-X 14" X 40" LATHE w/dro
MODEL SB1052F TURN-X 14" X 40" LATHE w/dro Manual Insert PHONE: (360) 734-1540 www.southbendlathe.com The Model SB1052F Lathe is the same machine as the Model SB1052 except for the following: Added a 2-Axis
More informationTABLES SAWS Laguna Fusion 10 tablesaw Laguna Platinum 10" Tablesaw Laguna Platinum Dovetail 10 Tablesaw BANDSAWS Laguna 14 Bandsaw 14 Twelve Laguna LT14 SUV Bandsaw Laguna 18 Bandsaw LT 18 3000 PLANERS
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationDUGARD EAGLE. Mega Slant and Mega Turn Heavy Duty CNC Lathes
DUGARD EAGLE Mega Slant and Mega Turn Heavy Duty CNC Lathes Dugard Eagle SS and SA Series Machine Features 60 for SA-Series, 45 for SS-Series slant bed construction ensures maximum stability and convenient
More informationGH-1340B(C6232B2) GH-1440B(C6236B2) GEARED HEAD PRECISION LATHE
GH-1340B(C6232B2) GH-1440B(C6236B2) GEARED HEAD PRECISION LATHE OPERATOR S MANUAL WARNING! 1. Read and understand the entire instruction manual before operating machine. 2. Always wear approved safety
More informationPM-1440HD LATHE OPERATION MANUAL
PM-1440HD LATHE OPERATION MANUAL WARNING! 1. Read and understand the entire instruction manual before attempting assembly or operation. 2. These lathes are designed and intended for use by properly trained
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationA Full Line of Quality Constructed, High Performance, Affordable, Soft Start and Variable Speed Lathes
www.clausing-industrial.com A Full Line of Quality Constructed, High Performance, Affordable, Soft Start and Variable Speed Lathes Quality Manufactured in Europe to International Standards 13", 14", 15",
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More information