BESISTA rod systems. Welcome to BESISTA. Your supplier of high-quality tension and compression rod systems for architecture and civil engineering
|
|
- Sabina Dawson
- 6 years ago
- Views:
Transcription
1 BESISTA International GmbH Heckenweg 1 DE Bad Boll BESISTA rod systems Tel Fax Info@besista.com ETA-08/0038 DIBt Berlin 0672-CPD-0091 MPA Stuttgart Welcome to BESISTA Your supplier of high-quality tension and compression rod systems for architecture and civil engineering With the following working documents we are pleased to present in compact form the key information on our BESISTA 540 tension and compression rod systems. Our optimised BESISTA 540 designer rod systems offer, compared to other systems, an elegantly crafted, filigree design, a higher load-carrying capacity, greater safety, superior cost effectiveness, exceptionally straightforward handling, and patented safety and installation features. Our tension rods are made of S540N, an extra-high-quality modified S460N with a guaranteed yield strength of 540 N/mm². Another unique feature of BESISTA are hot-dip galvanized rod threads for sustainable construction. If hot-dip galvanized is specified, the client is entitled to full-scale hot-dip galvanizing, including hot-dip galvanized rod threads. The handling of our rod systems is such that you need neither special assembly work, sealing and encapsulation, nor time-consuming sales rep calls. We continue to guarantee maximum product safety, the highest quality and excellent workmanship. Please compare the quality standards and not just the price. We wish you much pleasure and success with BESISTA now and in the future. Your BESISTA team from Bad Boll, Germany Web-EN-Begrüssung
2 LGA Bridge, Neu-Ulm, DE Potsdamer Platz, Berlin, DE Olympic stadium, Sochi, RU -POPULOUS PwC Parkside, Zürich, CH Metropol Parasol, Sevilla, Tension rod systems and compression struts for architecture and civil engineering Velodrom, Aigle, CH BESISTA rod systems BESISTA International GmbH Heckenweg 1 DE Bad Boll Germany Tel: +49(0)7164/ Fax: +49(0)7164/ Info@besista.com Velodrom, Aigle, CH www. besista. com Red Bull Arena, Leipzig, DE Central Stadium Bata Eq. Guinea Europoles Konin, PL Skywalk, Rügen, DE Skywalk, Scheidegg, DE Werb-Mail-EN-Bildseite
3 BESISTA Betschart-Sicherheits-Stabsysteme (Betschart safety rod systems) are designer products with hot-dip galvanized rod threads. More comprehensive details, all drawings, the approval and type stress analysis are available at or can be requested at Limit tensile forces N R,d in kn for BESISTA 540 (for limit compressive forces see Navi - Design loads ) Material combination 1 made of S540N, an extra-high-quality modified S460N with a guaranteed yield strength of 540 N/mm², is BESISTA standard and must be exclusively supplied by BESISTA International GmbH. Material combinations 4 and 5 contain the limit tensile forces of lower-strength tension rods, gusset plates and circular discs made of standard steel grades, for cases where customers produce the tension rods themselves and purchase only the ETAapproved rod anchors from BESISTA. The installation instructions must be adhered to in all cases. Material combinations M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76 1 Standard S540N (Re 540) S ETA-08/0038 DIBt Berlin S540N (Re 540) GJS S540N (Re 540) S355 (Re 355) (Re 235) BESISTA Key Technical Data 0672-CPD Example with cover sleeve Rod anchor (fork head) Tension rod MPA Stuttgart Example without cover sleeve BESISTA tension rod systems Suspension ring for solid rod min. 40 Extension sleeve for any length beyond 15 m min. 50 Cross anchor Tensioning sleeve for controlled tensioning Suspension ring for coupler Circular disc Dimensions in mm for BESISTA 540 Thread sizes M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76 Tension rods Ø d Rod anchors Gusset plates Circular discs Machined compression rod connection (solid rod) Compression rod connection one-part for tube Compression rod connection two-part (tube) or timber with higher-strength threaded bolts Ø d1 Z Ø d1 D 1) V 2) L6 3) w2 (t) c2 min Ø d2 Z 8, Ø d2 D 10, L5 4) Ø Da Ø Di Ø Sm Suspended rods Ø d ) Larger pin diameters apply for compression rods: Ø d1 D for compression rods, Ø d1 Z for tension rods - see Navi - Technical data. 2) Max. adjustment length = 2xV 3) Rod length = system length -2xL6 4) L5 = Distance from centre of pin to plate edge Subject to modifications Protected by several patents Werb-Mail-EN-tech-Dat
4 BESISTA International GmbH DE Bad Boll Heckenweg 1 Tel Fax -17 Info@besista.com ETA-08/ CPD-0091/Bl14 Rod anchor Tension rod Enquiry BESISTA rod systems Order Customer:... with cover sleeves System length Street:... Location / post code:... Phone / Fax:... without cover sleeves Date:... Project. / No.: Officer:... Permanently hot-dip galvanized tension rods with a durable zinc coat on the rod threads are a speciality of BESISTA. The quality of hotdip galvanized rod threads is far superior to brushed, sprayed or encapsulated black threads. The inspection hole in the rod anchors, which is unique to BESISTA, permits 100% inspection of the thread screw-in depth. Unlike with other systems, no cover sleeves are needed - see drawings above. BESISTA 540 tension rod systems under European technical approval ETA-08/0038, each consisting of 2 rod anchors (fork heads) made of EN-GJS LT with cross-pins and locking rings and 1 tension rod with left-hand / right-hand thread and wrench flats, made of S540N, a high-quality modified S460N with guaranteed yield strength of 540 N/mm². Please always indicate: Limit tensile forces NR,d in kn determined for: deformation tensile force Steel grade according to statics: S355 S460 S540 black hot-dip galvanized with hot-dip galv. rod threads without cover sleeves with cover sleeves N R,d kn M (Ø) System length mm Quantity N R,d kn M (Ø) System length mm Quantity BESISTA circular discs made of S355 or BESISTA cross anchors made of EN-GJS LT circular discs cross anchors black hot-dip galvanized for M (Ø) smallest angle Quantity for M (Ø) smallest angle Quantity BESISTA 540 compression rod connections - please send us a drawing with dimensions. Prices / payment: Ex-works, by haulage contractor commissioned by you, plus packaging and VAT (in Germany). Payment by arrangement. Delivery period: Tension rod systems black from one week, hot-dip galvanized from two weeks. The quotations are without obligation. We reserve the right to introduce technical modifications and amend prices. Errors and omissions excepted. We deliver subject to extended retention of title, i. e. the goods remain our property until they have been paid for in full. Claims for compensation will be limited to the net value of goods. Any complaints shall be subject to Sections 377, 378 of the German Commercial Code (HGB). German law shall apply whereas the CISG is waived. Place of performance and legal venue for both parties is Göppingen, Germany. Local Court Ulm HRB Vat ID No. DE Signed:... Protected by several patents Werbung-Mailing-Inhalt-EN-Anfra-Best
5 Safety Features - Sustainability higher with BESISTA required under approval The inspection hole in the rod anchors, which is unique to BESISTA, permits 100% inspection of the thread screw-in depth. Unlike with other systems, no cover sleeves are needed. The specially designed, internal shape of the fork ends allows the BESISTA rod anchors to accommodate axial offsets of up to 2. This prevents transverse stresses and protects coatings - a major benefit during installation. (patented) Filigree longitudinal ribs on the BESISTA rod anchors and smooth transitions from the straps to the shaft guarantee perfect forming and casting while at the same time serving as wrench flats. BESISTA rod anchors are made of top-grade highly ductile spheroidal graphite cast iron with guaranteed notched bar impact work at 20 C. No crack-prone steel casting. Wrench flats both on the tension rods and on the BESISTA rod anchors permit distortion-free tensioning. Sustainability by using hot-dip galvanized system parts. If hot-dip galvanized is specified, the client is entitled to insist on hot-dip galvanized threads. The hot-dip galvanized rod threads are unique to BESISTA. With BESISTA, no sealing or encapsulation (which can lead to uncontrollable thread areas) is necessary. Winner of German Galvanizers Award. European Technical Approvals and type stress analysis for all BESISTA rod systems and their components. Our tension rods are made of S540N, a high-quality modified S460N with guaranteed yield strength of 540 N/mm². Above-average safety margins in spite of filigree system components. Multiple safety inspections in our own manufacturing department. Continuous external surveillance and CE certification by the Materials Testing Institute Stuttgart (MPA Stuttgart). Quality Features - Ecology Highest quality standards thanks to expert in-house development and manufacture. Up to 45% material and energy savings through consistent optimisation. BESISTA cross anchors are provided exclusively by BESISTA. They allow contactfree crossing of tension rods and offer an elegantly crafted and sound structural solution for intersections. Also exclusively available from BESISTA are the cost-effective intermediate sizes M14, 18, 22, 33, 39, 45 and 68, providing 24 thread sizes from M8 to M76, with limit tensile forces up to 2016 kn. The smaller increments save a lot of material. Compression rod connections for compression rods made of steel or timber are available in three different types. Our compact, extra-light BESISTA pretensioning systems BVS-230kN and BVS-500kN permit rapid, controlled pretensioning of the tension rods. With the BVS-230, a tension of up to 230 kn can be applied by a single person in a few minutes. Very large adjustment lengths in the BESISTA rod anchors - at least three times the rod diameter per rod - offer enormous benefits during installation. Unlike sleeves with welded straps, the specially designed BESISTA suspension rings allow the tension rods to be turned and tensioned at all times
European Technical Assessment ETA-04/0038 English translation prepared by DIBt. Page 2 of July 2016
European Technical Assessment ETA-04/0038 Page 2 of 15 29 July 2016 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationEuropean Technical Approval ETA-10/0413
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationHVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version Benefits HVU2 Mortar capsule Anchor rod: HAS HAS-R HAS-HCR (M8-M30) Anchor rod: HAS-E HAS-E-R HAS-E-HCR (M8-M30)
More informationthoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationSECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
More informationCircular Column Formwork Circo. Contents. Product list. Ref.-No. Description / Application m² kg
Product list This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless
More informationCone. Bolt. Rubber Washer. Rubber Washer. compressed / increased clamping force
Type HB - Hollo-Bolt Cavity Fixings 2 Type HB - Hollo-Bolt Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316 Collar Sleeve Cone Bolt Suitable for hollow sections,
More informationMevaDec. Contents. Ref. No. Description / Application Product m² list kg
Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list.
More informationHSV EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSV EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSV Expansion anchor Economical expansion anchor for uncracked concrete Anchor version HSV (F) (M8-M16) HSV-BW (M8-M16) Benefits - Torque-controlled
More informationHALFEN Anchor channel HTA / Special screw HS
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA / Special screw HS CONF-DOP_HTA 02/16-E No. H01-09/0339 1. 2. 3. 4. 5. 6. 7. 8. Unique identification code of the HALFEN Anchor channel HTA / HALFEN
More informationconnecting the world PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
C O N S T R U C T I O N I W I N D E N E R G Y I T U N N E L L I N G I R A I L I O E M connecting the world the tunnelling market Tunnelling is a key facet of infrastructure development particularly where
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationFORTRESS BOTTOM PLATE ANCHORS. Product. Scope. Building Regulations. Appraisal No. 687 [2017]
FORTRESS BOTTOM PLATE This Appraisal replaces BRANZ Appraisal No. 687 (2010) BRANZ Appraisals Technical Assessments of products for building and construction. Manufacturing Suppliers Limited 560 Rosebank
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationOne-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationErstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
More informationDesign Guide. Original version of the design guide
Page 1 of 12 Original version of the design guide For Series Components Spieth locknuts (precision locknuts) MSR 58x1.5 MSR 60x1.5 MSR 60x2 MSR 62x1.5 MSR 65x1.5 MSR 65x2 MSR 68x1.5 MSR 70x1.5 MSR 70x2
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationEMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL
EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION 05720 METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL EMMEGI ARCHITECTURAL FENCING is a high quality steel fencing system comprised of a hybrid
More informationKee Gate Operation & Maintenance Manual
R E L I A B L E S A F E A C C E S S Kee Gate Operation & Maintenance Manual 2 Kee Gate System Overview KEE SAFETY S SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationSTRUCTURAL BRACKETS CATALOGUE
0/2 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to cut
More informationCARES Technical Approval Report TA1-B 5042
CARES Technical Approval Report TA1-B 5042 Issue 4 Dextra ROLLTEC Standard, Positional and Caging Couplers Assessment of the Dextra ROLLTEC Standard, Positional and Caging Coupler Product and Quality System
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationTABLE OF CONTENTS. 1.0 Scope. 2.0 References. 3.0 Definitions. 4.0 Submission and Design Requirements. 5.0 Materials 5.1 General 5.
1.0 Scope 2.0 References 3.0 Definitions 4.0 Submission and Design Requirements 5.0 Materials 5.1 General 5.2 Marking 6.0 Equipment 7.0 Production 7.1 Steel Octagonal Poles 7.2 Base Plate 7.3 Top Cap 7.4
More informationHPD Aerated concrete anchor. Approvals / certificates. Basic loading data (for a single anchor)
HPD Anchor version HPD Benefits - anchor for autoclaved aerated concrete - maximum use of base material capacity - setting without drilling Autoclaved aerated concrete Fire resistance Sprinkler approved
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationZaFix support foot STZ
76 www.sihga.com, Phone +43 (0) 7612/ 74 370-0 ZaFix support foot STZ For extra-fast assembly ZaFix support foot STZ with perfect structural wood protection ensures a durable and long-lived wood connection.
More informationmetal anchors fixed on the profile back in combination with special nib bolts Product size covered
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA 40/22P and HTA 50/30P CONF-DOP_HTA-P 01/17-E No. H01-16/0453 1. 2. 3. 4. 5. 6. Unique identification code of the HALFEN Anchor channel HTA 40/22P and
More informationAnchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /
Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2016-09 09 / 2016 1 HSA Stud anchor Anchor version Benefits HSA Carbon steel with DIN 125 washer HSA-F Carbon steel hot dipped
More informationEuropean Technical Approval ETA-07/0212
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 45 76 20 20 Fax +45 45 76 33 20 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationMetroll. Purlins & Girts. C Section Purlins. C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section.
C Section Purlins C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section. Metroll C Section Purlins are recommended for simple, non-continuous span construction. Structural
More informationSingle and Double Gates Operation & Maintenance Manual
R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual 2 System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent
More informationSturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January
More informationHELCOR druk_geosyntetyki II.qxd :22 Strona 2 HELICALLY CORRUGATED STEEL PIPES. HelCor & HelCor PA
HELCOR druk_geosyntetyki II.qxd 2012-09-28 13:22 Strona 2 HELICALLY CORRUGATED STEEL PIPES HelCor & HelCor PA HELCOR druk_geosyntetyki II.qxd 2012-09-28 13:26 Strona 3 1. Introduction The history of corrugated
More informationDowel-type fasteners. Timber Connections. Academic resources. Introduction. Deferent types of dowel-type fasteners. Version 1
Academic resources Timber Connections Dowel-type fasteners Version 1 This unit covers the following topics: Deferent types of dowel-type fasteners Introduction There are four criteria designers should
More informationDETAN ROD SYSTEMS DT 13-E FAÇADE NEW! with quality mark RAL-GZ 996/5 ETA-Approval for stainless steel systems DETAN-E
DT 13-E FAÇADE NEW! with quality mark RAL-GZ 996/5 ETA-Approval for stainless steel systems DETAN-E DETAN - a Creative Design Element In this project DETAN was purposely applied as a visual, creative design
More informationMidwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationWith time, the evolution of anchors have led to different designs More than one anchor type may be suitable for a particular purpose Thus there are
Supreme range of Soil & rock anchors Introduction Used to anchor into concrete, masonry, stone With time, the evolution of anchors have led to different designs More than one anchor type may be suitable
More information015 : 1993 CEB STANDARD
015 : 1993 CEB STANDARD UNGALVANIZED STAY ASSEMBLIES CEYLON ELECTRICITY BOARD SRI LANKA Specification for UNGALVANIZED STAY ASSEMBLIES CEB Standard 015 : 1993 CEYLON ELECTRICITY BOARD No. 50, Sir Chittampalam
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationC-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
More informationTechnical Innovation in Steelwork Connections
Established 1934 Technical Innovation in Steelwork Connections 2 Introduction to Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer of designing and manufacturing
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationOrdering example: WSK-600 / B x H x L = 155 mm. M8 hexagon head screw, fixed by a locknut. Threaded bolt
Ordering example: / B x H x L = 155 mm P-3464/5595-MPA BS General / ordering example Dimensions B (width) x H (height) in mm (always corresponds to the clear shaft or smoke control damper dimensions) Available
More informationEuropean Technical Assessment ETA-17/1005 of
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More information² TL Beton-StB 07 = German technical conditions for construction materials for concrete road pavements
Introduction A transverse joint frequently crossed by heavy goods traffic tends to form steps if it not perfectly doweled. This is associated with negative effects on ride comfort and driving safety as
More informationInternal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) Hilti anchor design software
Anchor version Benefits Internal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) the perfect solution for small edge and space distance suitable for thin concrete
More informationGuardrail T40 4MS2 BP for Bridge Parapet
Guardrail for Bridge Parapet Containment level H2 Installation Manual & Specifications Patented EN 1317 1 SUMMARY A. General description B. Crash testing & CE Certificate C. Working D. Installation method
More informationP r o d u c t D e s c r i p t i o n
1 P r o d u c t D e s c r i p t i o n All BARTEK SYSTEMS Couplers are produced according to ISO9001 Rebar couplers can simplify the design and construction of reinforced concrete and reduce the amount
More informationCaroFalt. Contents. Product list
Product list This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless
More information1. ANSI/ASME Standard B , Square and Hex Bolts and Screws, Inch Series
SECTION 31 66 13 HELICAL PILES AND HELICAL ANCHORS PART 1 - GENERAL 1.1 DESCRIPTION A. This work pertains to furnishing and installing Helical Piles and Bracket Assemblies shown in the Contract in accordance
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationTECHNICAL MANUAL. HPM Rebar Anchor Bolt Easy and Fast Bolted Connections
TECHNICAL MANUAL HPM Rebar Anchor Bolt Easy and Fast Bolted Connections Version: PEIKKO GROUP 01/2015 HPM Anchor Bolt For bolted connections System benefits Standardized and approved rebar anchor bolt
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationInstallation and Operational Instructions for ROBA -DS couplings. _ (disk pack HF) Sizes
. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting in
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationEuropean Technical Assessment ETA 15/0029 of 12/06/2017
RISE Research Institutes of Sweden AB RISE Certifiering Box 553 SE-371 23 Karlskrona Sweden Member of www.eota.eu Tel: +46 10 516 63 00 Web: www.ri.se Mail: certifiering@ri.se European of 12/06/2017 General
More informationDETAN ROD SYSTEMS DT 14-E FAÇADE
DT 14-E FAÇADE D ET A N R OD S YS TE MS DETAN a Creative Design Element In this project DETAN was purposely applied as a visual, creative design element. The effect is an elegant, aesthetic structure.
More informationEURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES
EURO-BEARINGS LTD & MATING STEEL PROFILES For fork lift trucks, overhead cranes, track conveyors and heavy duty linear motion systems... The axial (side thrust) roller runs on the web of the channel whilst
More informationCity of Regina Standard Construction Specification SECTION 2660 CHAIN LINK FENCE
1.0 GENERAL 1.1 Scope 1.1.1 The work shall consist of supply and installing chain link fence, including braces and gates, as shown on the plans and specifications at the locations designated by the Engineer.
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationAURORA BRAND Pipe Hangers
AURORA BRAND Pipe Hangers SCHEDULE: H-2017 EFFECTIVE: March 6 and Supports 2017 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151 North
More informationOil tempered SiCrV-alloyed high tensile valve spring wire Only manudactured in China
1/5 Oil tempered SiCrV-alloyed high tensile valve spring wire Only manudactured in China is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high
More information1. Enumerate the most commonly used engineering materials and state some important properties and their engineering applications.
Code No: R05310305 Set No. 1 III B.Tech I Semester Regular Examinations, November 2008 DESIGN OF MACHINE MEMBERS-I ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks:
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationCONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM
CONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM quick and easy to install no special installation equipment high strength excellent for new construction and rehab projects Bar-Lock Coupler System* ICBO
More informationHEICO FASTENING SYSTEMS HEICO-LOCK WEDGE LOCKING SYSTEMS
HEICO FASTENING SYSTEMS WEDGE LOCKING SYSTEMS WWW.HEICO-LOCK.COM PRODUCT OVERVIEW Wedge Locking Systems high quality anti-vibration security for the most demanding of bolted joint applications! WEDGE LOCK
More informationSingle and Double Gates Operation & Maintenance Manual
R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationAURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
More informationTHE WORLD LEADER. Reinforcing Bar Coupler System. For The Construction Industry.
THE WORLD LEADER Reinforcing Bar Coupler System For The Construction Industry Unbrako Reinforcing Bar Coupler System Unbrako Rebar Coupler Systems, also known as reinforcing bar couplers or coupler splicing
More informationOutdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages
- pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted
More informationSEA SELF DRILLING, THREADED, HOLLOW BAR / GROUT-ABLE SOIL NAILS / ANCHORS
SEA SELF DRILLING, THREADED, HOLLOW BAR / GROUT-ABLE SOIL NAILS / ANCHORS THE SEA SYSTEM SEA hollow T threaded bar Rock Anchors / Soil Nails provide the ultimate solution for securing unstable embankments
More informationHEICO FASTENING SYSTEMS. Simple Fast Reliable HEICO-TEC TENSION NUT
HEICO FASTENING SYSTEMS Simple Fast Reliable HEICO-TEC TENSION NUT WWW.HEICO-TEC.COM HEICO-TEC TENSION NUT SIMPLE FAST RELIABLE For a secure joint with a HEICO-TEC tension nut, no electric, hydraulic,
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: ACM 139/1905/2 Product code: 0226H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL CERTIFICATE
More informationSensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering
Change from one to two columns Data Sheet 10/10-3.61-EN Rev. D SensyTemp TSB (B R) Resistance thermometer for building automation, machine construction and environmental engineering Measurement made easy
More informationEuropean Technical Approval ETA-08/0165
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationPEC-TA Cast-in Channels and Bolts. Certified German quality for high-end fixing solutions. Advantages of using PEC Cast-in Channels.
Fixing Technology s and Bolts PEC Cast-in Channels are ideally suited for quick, reliable and cost-efficient fixing of different construction elements. The possibility of making simple and flexible adjustments
More informationDesign Guide. Original version of the design guide
Page 1 of 14 Original version of the design guide For Components Short Long Compact Short Long Compact Spieth clamping set (precision clamping sets) - 14.2-40.1 40.2 40.56 16.1 16.2 16.28 42.1 42.2 42.58-18.2
More informationWind power Tooling solutions for all components and all materials from one source
Wind power Tooling solutions for all components and all materials from one source application specific tool materials and coatings innovative geometries for highest accuracy and quality intelligent special
More informationSECTION 58 PRECAST CONCRETE BOX CULVERT. This work consists of furnishing and installing Pre-cast Concrete Box Culverts.
SECTION 58 PRECAST CONCRETE BOX CULVERT 58.1 DESCRIPTION A. General This work consists of furnishing and installing Pre-cast Concrete Box Culverts. B. Related Work Section 51 Section 52 Section 53 Section
More informationDETAN ROD SYSTEMS DT 16.1-E FAÇADE
DT 16.1-E FAÇADE HALFEN DETAN The filigree tension and compression rod system odern architecture strives to M be both practical and functional, but also to design more artistically exceptional buildings.
More informationSTRUCTURAL BRACKETS CATALOGUE
08/2011 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to
More informationHours / 100 Marks Seat No.
17610 15116 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More information