Brand Harmonized Parts Catalog. Humanetics Innovative Solutions, Inc. SID-IIs Side Impact Female Dummy H
|
|
- Milton Scot Horton
- 6 years ago
- Views:
Transcription
1 Brand Harmonized Parts Catalog Humanetics Innovative Solutions, Inc. SID-IIs Side Impact Female Dummy H
2 For information on Humanetics products, please visit our web site at or contact: Humanetics Innovative Solutions Galleon Drive Plymouth, MI 48170, USA Telephone: Fax: No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording, mechanical or otherwise, without the express written consent of Humanetics Innovative Solutions. Copyright 2017 Humanetics Innovative Solutions, All rights reserved. The information in this catalog is furnished for informational use only, and is subject to change without notice. Humanetics Innovative Solutions assumes no responsibility or liability for any errors or inaccuracies that may appear in this catalog. Harmonized SID-IIs ATD Page 2 Rev. 1, Nov., 2017
3 Table of Contents Head Assembly... 4 Neck Assembly... 5 Neck Mounting... 6 Shoulder Rib... 7 Thorax and Abdomen Ribs... 8 Spine Box Assembly... 9 Chest Jacket Arm Assembly Lower Torso Assembly Lower Torso Assembly Lower Torso Assembly Leg Assembly Ankle Assembly Accelerometer Mounts Clothes Misc Background The SID-IIs Small Side Impact Dummy (pronounced SID-2-s) is a new generation crash test dummy to specifically evaluate advanced automotive side impact protection systems, particularly side airbags. SID- IIs was jointly developed in 1994 and 1995 by First Technology Safety Systems (FTSS) and the Occupant Safety Research Partnership (OSRP) of the USCAR program. The dummy has been extensively tested worldwide and is capable of measuring over 100 data channels for injury assessment of the head, neck, arm, thorax, abdomen, pelvis and leg. Anthropometry is based on the Hybrid III 5th Female Dummy and also closely matches size and weight of the year old child. Harmonized SID-IIs ATD Page 3 Rev. 1, Nov., 2017
4 Head Assembly Harmonized H 6-Axis Head Assembly H Skin, Head Tested/Certified Pivot Pin - Neck Skull, Machined H Skin, Skull Cap DN Washer Nodding Joint X-DN Neck Transducer Structural Replacement FT Skull Cap, Machined FT Screw SHCS 1/4-28 X 7/ DN Screw, SSCP 8-32 X 1/ FT Screw, SHCS X 1/ DN Washer ID X.375 OD X.06 THK 4 Harmonized SID-IIs ATD Page 4 Rev. 1, Nov., 2017
5 Neck Assembly Neck Assembly Tested/Certified Neck Molded Tested/Certified H Nodding Block, Shore A Bushing, Upper Neck Bushing, Lower (ref) Bracket, Upper Neck FT Screw SHCS X 5/ FT Screw FHCS X 5/ DN Nodding Joint Assembly DN Neck Cable DN Nut Hex Jam ½ DN Washer, 1.06 OD X.53 ID X.06 THK DN Washer, Flat.218 ID X.375 OD X.03 THK 4 Harmonized SID-IIs ATD Page 5 Rev. 1, Nov., 2017
6 Neck Mounting Upper Torso Assembly Structural Replacement, Lwr 1/2 Neck LC Bracket, Lower Neck Rib Stop, Left Rib Stop, Right DN Screw, BHCS 6-32 X 1/ Ballast, Lower Neck Bracket DN Screw, BHCS 6-32 X 3/ DN Screw, SHCS 6-32 X 1/ Sternum Neck Mount Block Assembly Rib Stop Upper Shoulder Rib Stop, Lower Shoulder Screw Modified Pot Bearing DN Screw, SHCS 1/4-20 X DN Screw, SHCS 1/4-20 X 2 3/ DN Screw, FHCS 4-40 X 5/ FT (ref) Screw SHCS 3/8-16 X 1 NYLOK FT (ref) Washer, Clamping 1 Harmonized SID-IIs ATD Page 6 Rev. 1, Nov., 2017
7 Shoulder Rib Upper Torso Assembly (Con t) Rib Shoulder & Damping Material Assy, T/C Rib Stiffener Shoulder Shoulder Rib Stiffener Linear Pot Hook Shoulder Rib Washer Shoulder Mount, LC, Shoulder LC Assembly, Shoulder Replacement Shoulder Yoke Assembly Rib Mount Shoulder DN Screw, SHCS 4-40 X 1/ DN Screw, FHCS 1/4-20 X 3/ DN Screw, SHSS 3/8 X 3/ FT Screw, SHCS 2-56 X 5/ DN Screw, FHCS X 5/8 4 Harmonized SID-IIs ATD Page 7 Rev. 1, Nov., 2017
8 Thorax and Abdomen Ribs Upper Torso Assembly (Con t) Thorax Pad Abdominal Pad Upper Bib Ribs 3 Sections Lower Bib Ribs 2 Sections Thorax Rib/Damp Assy-Untested-Upr Torso Abdomen Rib & Damping Mater, Assy-Untested Rib Stiffener Lower Linear Pot Hook Assy Lower Ribs, Enhanced FT Screw, BHCS X 3/ DN Washer, Lock # DN Screw, SHCS 4-40 X 1/ FT Screw, BHCS X 1/2 26 * Cable Tie (ref) Potentiometer ½ Inch, Assy 15 Cable 5 Harmonized SID-IIs ATD Page 8 Rev. 1, Nov., 2017
9 Spine Box Assembly Upper Torso Assembly (Con t) Weldment, Spine Box Lower Rib Pad Upper Rib Stop Middle Rib Stop Lower Rib Stop Screw Modified Pot Bearing Linear Pot Frame Assembly Rib Stop Assembly A Rib Stop Assembly B DN Screw, SHCS X 5/ DN Screw, SHCS X 3/4 32 Harmonized SID-IIs ATD Page 9 Rev. 1, Nov., 2017
10 Chest Jacket Upper Torso Assembly (Con t) Chest Jacket SID-IIs w/out Inside Pocket 1 Harmonized SID-IIs ATD Page 10 Rev. 1, Nov., 2017
11 Arm Assembly H Arm Assembly Complete, Left H Arm Flesh Molded Left Arm Plug Molded Bearing Flanged 1/4X.251X DN Screw, SHSS 1/4 X FT Screw, FHCS X 3/ H Arm Assembly Complete, Right H Arm Flesh Molded Right Arm Plug Molded Bearing Flanged 1/4X.251X DN Screw, SHSS 1/4 X FT Screw, FHCS X 3/8 1 Harmonized SID-IIs ATD Page 11 Rev. 1, Nov., 2017
12 Lower Torso Assembly H Torso, Lower Assy Complete T/C H Pelvis Flesh, Molded, T/C Pelvis Bone Machined Femur Mount Plate Pelvis, Left Femur Mount Plate Pelvis, Right Femur Holding Shaft, Pelvis Inner Bushing Femur Assembly. Left Femur Assembly. Right LC, Pelvis, Acetabulum Replacement Load Cell Pubic Replacement Pelvis Plug, T/C DN Nut, Hex Jam 5/8-18 Locknut DN Screw, FHCS 1/4-20 X 5/ DN Screw, SHCS X 7/ DN Screw, SHSS 1/2 X 1 1/4 2 Harmonized SID-IIs ATD Page 12 Rev. 1, Nov., 2017
13 Lower Torso Assembly H Torso, Lower Assy Complete T/C (Con t) LC, Lumbar Spine Replacement LC, Wing Replacement Iliac Wing Backer Plate Iliac Wing Molded Left, Pelvis Iliac Wing Molded Right, Pelvis Lumbar Ballast BLK Structural Replacement DN Screw, SHCS X 5/ DN Screw, SHCS 5/16-18 X 1-3/ DN Screw, FHCS 1/4-20 X 1 1/ DN Screw, SHCS 1/4-20 X 7/8 4 Harmonized SID-IIs ATD Page 13 Rev. 1, Nov., 2017
14 Lower Torso Assembly H Torso, Lower Assy Complete T/C (Con t) Lumbar Mounting Plate Lumbar Spine Molded Bushing, Upper Neck Bushing, Lower Cable Lumbar, Machined Linear Pot Frame Bottom Rib Screw Modified Pot Bearing DN Nut Hex Jam ½ DN Washer, Flat #10 X FT Screw, FHCS X 3/ FT Screw SHCS 1/4-20 X 5/8 Nylok (ref) Potentiometer ½ Inch, Assy 15 Cable 1 Harmonized SID-IIs ATD Page 14 Rev. 1, Nov., 2017
15 Leg Assembly Leg Assembly, Left FT Screw, SHCS 3/8-16 x 1-3/ FT Screw, FHCS x 3/ DN Screw, SHSS 1/4 x 5/8 2 Harmonized SID-IIs ATD Page 15 Rev. 1, Nov., 2017
16 L-H Upper Leg Flesh, Left FT Leg Weldment, Upper, Left DN Load Cell Simulator DN Screw, SHCS 3/8-16 x 1-1/ Knee Assembly, Left Structural Replacement Knee, Inboard Structural Replacement Knee, Outboard DN Knee Cap, Machined Assembly Knee Flesh Insert H Knee Flesh/Skin H Rotation Stop Cover FT Shoulder Bolt, Sliding Knee DN Washer, Sliding Knee DN Compression Washer H Lower Leg Flesh FT Lower Leg Structural Replacement DN Screw, SHCS 1/4-28 x 1/ FT Knee Clevis Weldment FT Lower Leg Structural Weldment FT Ankle Assembly with Flange See Detailed Assembly following H Foot Assy Molded, Left, Untested DN Heel Pad Foam Leg Assembly, Right FT Screw, SHCS 3/8-16 x 1-3/ FT Screw, FHCS x 3/ DN Screw, SHSS 1/4 x 5/ R-H Upper Leg Flesh, Right FT Leg Weldment, Upper, Right DN Load Cell Simulator DN Screw, SHCS 3/8-16 x 1-1/ Knee Assembly, Right Structural Replacement Knee, Inboard Structural Replacement Knee, Outboard DN Knee Cap, Machined Assembly Knee Flesh Insert H Knee Flesh/Skin H Rotation Stop Cover FT Shoulder Bolt, Sliding Knee DN Washer, Sliding Knee DN Compression Washer H Lower Leg Flesh FT Lower Leg Structural Replacement DN Screw, SHCS 1/4-28 x 1/ FT Knee Clevis Weldment FT Lower Leg Structural Weldment FT Ankle Assembly with Flange See Detailed Assembly following H Foot Assy Molded, Right, Untested DN Heel Pad Foam 2 Harmonized SID-IIs ATD Page 16 Rev. 1, Nov., 2017
17 Ankle Assembly Harmonized FT Ankle Assembly with Flange FT Ankle, Upper Shell FT Ankle, Lower Shell FT Ankle Shaft FT Stop Pin Retainer DN Pin, Dowel 3/16 x 3/8 1 A-1888-DN Ankle Friction Pad DN Screw, SSCP 5/16-18 x 3/ DN Screw, SSCP 8-32 x 1/ DN Screw, BHCS 6-32 x 1/2 4 A-1887-DN Ankle to Leg Attachment Bolt DN Screw, FHCS 6-32 x 1/ DN Ankle Bumper (Rubber) 1 Harmonized SID-IIs ATD Page 17 Rev. 1, Nov., 2017
18 Accelerometer Mounts Accelerometer Complete Dummy Components ( ( H) ( H) ( H) Type ( H) H/-2-H) Head Chest Pelvis Arm Endevco A B C Entran EGAS-FT Kyowa ASM-200BA Clothes Chest Jacket SID-IIs w/out Inside Pocket Shirt Short Sleeve, SM 100 Percent Cotton Pant Above Knee, SM, 100 Percent Cotton Shoes, Women's Black Oxford 7 1/2E MIL-S-21711E (pair) 1 Misc User Manual -SIDIIs H Lifting Ring FT Hex Wrenches T-Handle Ball End 3/32-3/8 1 DS D Skin Patch Material, Euro Brown 1 Harmonized SID-IIs ATD Page 18 Rev. 1, Nov., 2017
Humanetics Innovative Solutions, Inc. Hybrid-III 5th Small Female Dummy H FMVSS208, 49CFR Part 572, Subpart O
Hybrid-III 5th Small Female Dummy 880105-000-H FMVSS208, 49CFR Part 572, Subpart O Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com
More informationHumanetics Innovative Solutions, Inc. Hybrid-III 50th Male Dummy H FMVSS208, 49CFR Part 572, Subpart E. Brand Harmonized Parts Catalog
Hybrid-III 50th Male Dummy 78051-218-H FMVSS208, 49CFR Part 572, Subpart E Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact:
More informationHumanetics Innovative Solutions, Inc. Hybrid-III 50th Ball Bearing Knee Slider Male Dummy BKS-H. Brand Harmonized Parts Catalog
Hybrid-III 50th Ball Bearing Knee Slider Male Dummy 78051-218-BKS-H Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact:
More informationJASTI Parts Catalogue Side Impact Test Dummy
JASTI Parts Catalogue Side Impact Test Dummy Anthropomorphic Test Devise ISSUED on Apr/2016 Small Side Impact Dummy Full Assembly 49CFR Part572 Subpart V FMVSS214 USNCAP Head Assembly 180-1000 Upper Torso
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationLifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationLISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
More informationModel LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
More informationSection E SWEEP WAGON
Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for
More informationPARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
More informationParts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
More informationPRO PLOW and POLY PRO PLOW Snowplows
Western Products, PO Box 245038, Milwaukee, WI 53224 9538 www.westernplows.com May 1, 2014 Lit. No. 6689, Rev. 09 PRO PLOW and POLY PRO PLOW Snowplows Steel Blades 60381, 60390, 60308, 60655 Poly Blades
More informationRotary Mower L47, M47, N47, RM44YR Parts Catalog
R Ingersoll Rotary Mower L47, M47, N47, RM44YR Parts Catalog 8-2711 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Axle... 9 Bearings, Spindles... 11-13 Belts... 5-7 Blades... 11-13 Bracket,
More informationSECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
More informationLISTA DE REFACCION MODELO LS1018L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationModel LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationMain Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More informationTitle: QUIK PARTS Heading: DECKS Model: Year: 2010 Assembly: BLADE SPINDLE ASSEMBLY
Assembly: BLADE SPINDLE ASSEMBLY Assembly: BLADE SPINDLE ASSEMBLY PARTS LIST 1 623762 SPINDLE ASSY 2 623763 SPINDLE ASSY 3 243331 HEX BOLT 4 257041 WASHER - CUPPED 5 721167 SHIELD - BEARING 6 110081 BEARING
More informationTire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
More informationMODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
More informationParts Manual RZ4221 BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4221 BF / 9676101 Please
More informationPRO PLOW, PRO PLOW Series 2, POLY PRO PLOW and POLY PRO PLOW Series 2 Snowplows
Western Products, PO Box 24508, Milwaukee, WI 5224 958 www.westernplows.com May 1, 2014 Lit. No. 69694, Rev. 0 PRO PLOW, PRO PLOW Series 2, POLY PRO PLOW and POLY PRO PLOW Series 2 Snowplows Steel Blades
More informationEXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More informationHopper and Drive Components
January, 07 Lit. No. 7586, Rev. 00 Hopper and Drive Components Model SP-00- & SP-5- Low-Profile Tailgate Spreader Parts List This manual is for SnowEx SP-00- & SP-5- tailgate spreaders with serial numbers
More informationEMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
More informationSection J DISTRIBUTOR
Section J DISTRIBUTOR 1J 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 Turn Plate (right-hand) 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor Frame Complete 5. 47-090547-004
More informationCAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO
CAPX Installation Print 4/10/2019 6245100014 CAB ASSEMBLY Part Pos Description Quantity Foot Notes 6245100008 1 CAB SECTION 1 + 6705100023 2 PLATE, MOUNTING 1 6705012439 3 PLATE, MOUNTING 1 6326100000
More informationV-Maxx G2 Hopper Spreader
July 0, 0 Lit. No. 09, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 9 0 9 0 9 0 Lit. No. 09, Rev. 0 July 0, 0 Keep arms, hands, and loose
More informationCopyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More informationNote: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
More informationAttachment Kit Ford 250 4x4 Super Duty Early 350 4x4 Super Duty Early 450 Super Duty Early 550 Super Duty Early
Fisher Engineering P.O. Box 529 Rockland, Maine 04841 September 2, 2005 Lit. No. 22303, Rev. 05 S Y S T E M Attachment Kit Ford 250 4x4 Super Duty 1999-04 Early 350 4x4 Super Duty 1999-04 Early 450 Super
More informationParts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &
Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing
More informationAndyMark DART 12.
AndyMark DART 12 Part Number Description QTY These Parts Are Pre-Assembled by AndyMark am-0031 Bearing, 3/16"ID (R3) 1 am-0209 Bearing, 3/8"ID 1614ZZ 2 am-1028 Screw, #10-32x3/8 Pan Head Philips 8 am-1121
More informationSTANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
More informationMain Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
More informationMMZ jr Hydrostatic Zero-Turn Riding Mower
MMZ jr. Hydrostatic Zero-Turn Riding Mower MODEL ABM HP " Stamped Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS " Cutter Deck............................. and " Spindle Assembly.........................
More informationRP-VE416FS/FSD VE416FS and VE416FSD Roll Grooving Tools
PARTS ORDERING INFORMATION When ordering parts, the following information is necessary for Victaulic to process the order promptly: 1. Tool Model Number VE416FS or VE416FSD 2. Tool Serial Number The Serial
More informationDisc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
More informationLEG CURL IP-S1315 INSTALLATION INSTRUCTIONS
LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written
More informationHD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
More informationArc Trainer Main Frame Assembly
Arc Trainer Main Frame Assembly Kit No. 610AK019-4 Kit No. 630AK019-4 NOTE: This instruction sheet describes how to replace the main frame assembly in the Arc Trainer 610A. Tools Required 3/16 Allen wrench
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationCATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
More informationParts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
More informationCRP700 Benchtop Basic CNC Machine Assembly Instructions. Updated 10/24/2014 SHEET 1 of 24
CRP700 Benchtop Basic CNC Machine Assembly Instructions Updated 0//0 SHEET of NOTE: This piece of extrusion is mounted wide side up Quick Tip: Lay extrusion on table as shown for easy assembly BASE ASSEMBLY:.
More informationOPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO. 60 Inch Seeder. Product Number Starting Serial Number H00801 PATENT PENDING
0 Inch Seeder OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO 0 Inch Seeder Product Number 0 Starting Serial Number H000 PATENT PENDING Manual Number DANGER - IF INCORRECTLY USED THIS MACHINE CAN
More informationV-Maxx G2 Hopper Spreader VX-1500
June, 0 Lit. No. 045, Rev. 00 V-Maxx G Hopper Spreader VX-500 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 5 9 5 4 4 0 9 9 0 Lit. No. 045, Rev. 00 June, 0 Keep arms, hands, and loose
More informationCONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Turf Equipment MODEL 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly..................................
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents
More information700/705/710. Vehicle Mounted Brake Lathe & Rotor Driving Unit. Parts Identification
700/705/710 Vehicle Mounted Brake Lathe & Rotor Driving Unit READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationST927E Spare Parts
ST927E 1.1997 Spare Parts ELECTRIC START ASSEMBLY 8 9 7 6 ENGINE 6 601 00 15-88 MOTOR, STARTER 7 601 00 15-89 SCREW, 1/4-20X.50 8 601 00 15-90 SCREW, #6-32X2.50 9 601 00 15-91 CORD, STARTER 10 601 00 21-61
More informationDIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #
DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6
More informationTable of Content. Sayl Disassembly for Recycling
Y Sayl Disassembly for Recycling Table of Content 1. Work Chair Disassembly... 2 2. Side Chair Disassembly...17 3. Work Stool Footring Disassembly... 22 1 Y Sayl Disassembly for Recycling Work Chair Disassembly
More informationWalk-Behind Lawn Mowers
Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA THE MANUAL Before you
More informationW & A PARTS MANUAL PTO POWER DITCHER FOR CAT. II OR III STANDARD & QUICK HITCH. Model No RPM Model No.
W & A PARTS MANUAL PTO POWER DITCHER FOR CAT. II OR III STANDARD & QUICK HITCH Model No. 360 -- 540 RPM Model No. 370 -- 1,000 RPM SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationLS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
More informationIllustrated Parts List
Illustrated Parts List Rear Tine Tiller Model Series 0 Thru Model Series 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationPARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
More informationAssembly & Operating Instructions Ironmaster IM1500
Assembly & Operating Instructions Ironmaster IM1500 The IM1500 half cage is designed for barbell training with spotting capabilities. The IM1500 is designed to be used in conjunction with Ironmaster products,
More informationw w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationOWNERS MANUAL MODEL F660 HIP SLED
OWNERS MANUAL MODEL F HIP SLED QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will guarantee your complete
More informationSection J DISTRIBUTOR
Section J DISTRIBUTOR December 2009 1J Index No. Part No. Description 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 R.H. Turn Plate 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor
More informationParts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More informationParts Manual SPDZTR 42 / SPDZTR 42 BF /
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to
More information2 Pipe Clamp Bracket 3 11 M6 Screw with Tube M6 Hex Nut 2 4 M20 Flat Washer 4
3842 Revision B, May 201 Mounting Kit, For Metro Cell Antennas MC-MNT-TOP-2 Mounting Kit GENERAL INFORMATION Top of pole mounting option Fits round members.3" to 8." (10 to 21 mm) pole diameter. PRE-INSTALLATION
More informationINSTALLER S GUIDE CAUTION BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-20N DENTAL CHAIRS BDS-0050
INSTALLER S GUIDE BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-0N DENTAL CHAIRS Location for all the incoming utilities should be in accordance with the cabinet installation instructions.
More informationCONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
More informationIllustrated Pats List
Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should
More informationDT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher
DT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher Specifications DT3 - B291-060 - No. of needles & Needle gauge 7 Twin needle, 31.8 mm (1 1/4) 8 Twin needle, 34.9 mm (1 3/8) A 4 needle, 6.4-25.4-6.4
More informationCOMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251
PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.
More informationST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
More informationSection A Gear Box September A
Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000
More informationDA80F / WF81 AddressRight Fixed Head Printer. Parts List
DA80F / WF81 AddressRight Fixed Head Printer Parts List NOTICE! The use of this information by the recipient or others for purposes other than the repair, adjustment or operation of Pitney Bowes equipment
More informationModel No. MLT100 TABLE SAW 255MM
Page 1 / 6 Page 2 / 6 Page 3 / 6 Page 4 / 6 Page 5 / 6 Page 6 / 6 Page 1 / 8 001 JM27000001 HEX.BOLT M10X35 4 002 JM27000002 SPRING WASHER 10 4 003 JM27000003 FLAT WASHER 10 4 004 JM27000004 CROSS HEAD
More informationSelect Lab Adjustable Height Workstation
Assembly Instructions Select Lab Adjustable Height Workstation Mobile version is shown. Also available without casters. Contents Important User Information.............................. 2 Safety Precautions....................................
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS 3000 SERIES AUTOMATIC SLICERS 3713 ML-136144 3713 (Canada) ML-136177 3713N ML-136181 3713N (Canada) ML-136184 3913 ML-136145 3913 (Canada) ML-136179 3913N ML-136183 3913N (Canada)
More informationHopper and Drive Components
February, 07 Lit. No. 770, Rev. 0 Hopper and Drive Components Model TS-00- & TS-00-EG- Low-Profile Tailgate Spreader Parts List This manual is for TurfEx TS-00- & TS-00-EG- tailgate spreaders with serial
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS LT1 DISHWASHER ML-104239 LT1 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. D (June 2017) F-18581 Rev. D (June 2017) - 2 - HOBART 2017 Table
More informationFRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
More informationIllustrated Parts Manual
Illustrated Parts Manual Mustang Series RZT TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (December, 0) To The Owner Thank You Thank you for purchasing an MTD Zero-Turn Tractor.
More informationWestern Products, PO Box , Milwaukee, WI Blades 64750, 66980, & A&Q 66490; Lift Frame
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com June 15, 2010 Lit. No. 66899, Rev. 08 PRO PLUS Snowplow Blades 64750, 66980, 66974 & 66901 A&Q 66490; Lift Frame 67951-2 Parts
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationSS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles
More information