Facilities List. QL Revision - 05/18/17 Page 1 of 9. Karas Engineering AS9100 Quality Management System SHOP AREA
|
|
|
- Imogen Austin
- 6 years ago
- Views:
Transcription
1 Page 1 of 9 SHOP AREA
2 Page 2 of 9 OFFICE AREA
3 Page 3 of 9 CNC LATHES: SHOP AREA FACILITIES 1 (DOOSAN) CNC Doosan Puma 240B Turning Center 25 H.P. 2 ½ Bar Capacity 8 Chuck Capacity 1 (MIYANO) CNC Miyano Turning Center 15 H.P. 1 ¾ Bar Capacity 6 Chuck Capacity 8 x 2 Station Turret 1 (EMCO) CNC Emco Maier Turning Center 20 H.P. 1 ¾ Bar Capacity 6 Chuck Capacity 8 Station Turret 1 (KIA 2) CNC Kiaturn 15 Turning Center 15 H.P. 1 5/8 Bar Capacity 6 Chuck Capacity 1 (OKU labeled as KIA1 on drawing) CNC Okuma Genos L250E Turning Center 20 H.P. 2 Bar Capacity 8 Chuck Capacity
4 Page 4 of 9 SHOP AREA FACILITIES (CONTINUED) 1 (KIA 3) CNC SuperKiaturn 21B Turning Center 20 H.P. 2½ Bar Capacity 10 Chuck Capacit 1 (KIA 4) CNC SuperKiaturn 15 Turning Center 20 H.P. 1¾ Bar Capacity 8 Chuck Capacity MANUAL LATHES: 1 (HARDINGE) Hardinge Super Precision Chucker 1 Bar Capacity 6 Chuck Capacity 8 Station Turret w/ Threading Attachment 1 (SHELDON) Sheldon 13 Engine Lathe 1 (CLAUSING) Clausing 13 Engine Lathe 6 Station Turret Attachment
5 Page 5 of 9 SHOP AREA FACILITIES (CONTINUED) CNC MILLING MACHINES : 1 (FADAL 1) CNC Fadal VMC40 Machining Center 21 Station Automatic Tool Changer 16 x 39 Table 4th Axis Turning Table 2 (FADAL 2 and FADAL 3) CNC Fadal VMC15 Machining Center 21 Station Automatic Tool Changer 16 x 29.5 Table 1 (MV Jr) CNC Mori Seiki MVJr. Machining Center 16 Station Automatic Tool Changer 16 x 35.4 Table Computer Controlled Indexing Head MANUAL MILLING MACHINES: MANUAL MILLING MACHINES: 1 (BRIDGEPORT 1) Bridgeport Milling Machine 12 x 42 Table w/ Power Feed 1 (BRIDGEPORT 2) not shown in diagram 12 X 42 Table w/ CNC retro-fit and snap-change tool changer 1 (WELLS) Wells-Index Milling Machine
6 Page 6 of 9 12 x 48 Table w/ Power Feed SHOP AREA FACILITIES (CONTINUED) MISCELLANEOUS PRODUCTION EQUIPMENT: 1 Precision Surface Grinder, Chevalier 1 Precision Surface Grinder, 1 Diamond Precision Tool Grinder 1 Automatic Band Saw, Cosen 1 Band Saw, Wells 1 Vertical Band Saw, 1 Lead Screw Tapping Machine 10 Drill Presses Tapping Attachments Precision Servo Micro-Drill Press Turn Tables Indexers Dumore Grinding Attachment
7 Page 7 of 9 Boring and Facing Heads Etc. INSPECTION EQUIPMENT: 1 Statistical Process Control Computer 1 Keyence IM-6025 Instant Measuring System 1 14 Optical Comparator w/ Metrology Computer.0001 Increment 40 x Lens 1 14 Optical Comparator, Starrett, w/ Metrology Computer Increment 20 x Lens 1 12 Optical Comparator 20 x and 50 x Lens 1 Starret Master Surface Plate 18 x 24 1 Surface Plate Grade 2 18 x 24 2 Johnson Thread Gage Systems 1 Johnson Internal Thread Gage System 1 Hardness Tester 1 Thread Trend Gaging System 2 Digimatic Data Processors
8 Page 8 of 9 5 Internal Bore Micrometers.075 thru Set Dial Bore Gage.05 thru Surftest Surface Finish Gage 2 Digimatic Height Gage 12 1 Edmund Air Gage Resolution Digimatic Micrometers, Digimatic Calipers, Digimatic Indicator Micrometer Sets 0-6 Screw Thread Micrometers Disc, Anvil, Blade, Point, Depth Micrometers Calibration Grade Gage Block Sets Production Grade Gage Block Sets Plug Gages.011 thru (.001 increments) Thread Plug Gages, Thread Ring Gages (various sizes) 100 power Microscope Resolution Sine Plate, Sine Bar, Square, Protractor, Special Indicators Etc.
9 Page 9 of 9 OFFICE EQUIPMENT / PRODUCTION SUPPORT EQUIPMENT 1 Gateway Computer Server Windows 2000 Server operating system 7 Networked Computer Workstations Windows 98/ XP/ Vista/ Windows7 operating system 1 MasterCam 9.0 CAD/CAM NC programming software 1 QuickLink DNC software 1 Peachtree Accounting software 1 Visual EstiTrack ERP Shop Management software Karas Enterprise Management System Software Ample Storage Locations for WIP, Finished Goods, Raw Material, Special Tooling, etc. Ample Storage for Paper Files, etc. Workbenches, Conference Area, etc.
FACILITIES LIST 2014
95D MAINLINE DRIVE P.O. BOX 428 WESTFIELD, MA 01086 PHONE 413-562-0052 FAX 413-568-7902 info@preciseturning.com www.preciseturning.com FACILITIES LIST 2014 TURNING: MILLING: KIA SKT 21B CNC TURNING CENTER
Tridecs. C O R P O R A T I O N Prototype & Production Machining. MANUFACTURING EQUIPMENT SCHEDULE Version 12.4
Tridecs C O R P O R A T I O N Prototype & Production Machining MANUFACTURING EQUIPMENT SCHEDULE Version 12.4 Frank Schenkhuizen, Jr. President & Chief Executive Officer Rick Alexander Operations Manager
Our Facilities 5 AXIS MACHINING SOLUTIONS CNC TURNING
Our Facilities 5 AXIS MACHINING SOLUTIONS INTEGREX 300-IV 2010 5 AXIS MACHINE EQUIPED WITH 10 CHUCK AND 15 CHUCK. 60 BETWEEN CENTERS. 40 TOOL MAGAZINE. TURNING CAPACITY 16 DIAMETER. 15 H.P. MILL SPINDLE.
CHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION. Sheet metal Fabrication. CNC and General Machining. Assembly. Tooling CAD/CAM.
CHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION Sheet metal Fabrication CNC and General Machining Assembly Tooling CAD/CAM Stamping 123 Louise St. Rochester, NY 14606 TEL (585) 328-4900 FAX (585) 328-2938
Horizontal Machining Centers. Vertical Machining Centers
Kitamura MyCenter HX300iF Horizontal Control> 16i-MB X-axis Travel> 20 inches Z-axis Travel> 19 inches Rapid Traverse> 1969 ipm Max Spindle Speed> 20,000 rpm Big Plus Spindle Tool Capacity> 40 Full 4th
LATE MODEL MACHINE SHOP & TOOLROOM
LIVE ONSITE & WEBCAST AUCTION Plant Closure of: VENTURE PRECISION TECHNOLOGY AUCTION Thursday, December 3rd at 11:00am (CST) ASSET LOCATION 1881 Treble Drive Humble, TX 77338 INSPECTION Wednesday, December
Do you need? State-of-the-Art Machining Capabilities
Do you need? State-of-the-Art Machining Capabilities Old World craftsmanship meets New World technology in our modern manufacturing facility * 13-Axis robotic machining for highly unattended manufacturing
FOR SALE. 217 Interstate Lane Waterbury, CT 06705
CONTACT: BRIAN GODIN E-mail: BgodinPB@gmail.com www.godinpropertybrokers.com Phone: 203-577-2277 Fax: 203-577-2100 850 Straits Turnpike, Suite 101 Middlebury, CT, 06762 FOR SALE 217 Interstate Lane Waterbury,
FOR SALE. 217 Interstate Lane Waterbury, CT 06705
CONTACT: BRIAN GODIN E-mail: BgodinPB@gmail.com www.godinpropertybrokers.com Phone: 203-577-2277 Fax: 203-577-2100 850 Straits Turnpike, Suite 101 Middlebury, CT, 06762 FOR SALE 217 Interstate Lane Waterbury,
555 Dawson Drive Camarillo, CA Phone (805) Fax (805) CNC MILLS
CNC MILLS Toyoda 450III 40Taper Horizontal W/120 Tools Model No. 450III Toyoda 450III 40Taper Horizontal W/120 Tools Model No. 450III Toyoda 450III 40 Taper Horizontal W/200 Tools Model No. 450III R.G.V.
FACILITIES LIST County Line Road Warrington, PA Phone: Fax:
FACILITIES LIST 2001 County Line Road Warrington, PA 18976-2498 Phone: 215-343-1530 Fax: 215-343-1633 www.opschuman.com C.N.C. MILLING & DRILLING FACILITIES C.N.C. Milling 2 Cincinnati Cim-X, 4-axis Horizontal
TIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
1146 N Central Avenue #535 Glendale, California Phone: Fax:
A A AMERICAN AUCTIONEERS GROUP AMERICAN AUCTIONEERS GROUP 1146 N Central Avenue #535 Glendale, California 91202 Phone: 818-763-2021 Fax: 818-291-9495 WWW.AAGAUCTION.COM PRESORTED First-Class Mail U.S.
Name: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
2018 Facilities List
08 Facilities List 0 DOOSAN LYNX 00 0" CHUCK CNC TURNING CNC LATHE CENTER HIGH SPEED VERTICAL MILLING 00 MATSUURA RA IIG CENTER WITH PALLET CNC MILL CHANGER HIGH SPEED VERTICAL MILLING 999 DAEWOO DMV-400
BIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
Capabilities: CNC Milling, Turning, Wire EDM & Swiss Turning
Capabilities: CNC Milling, Turning, Wire EDM & Swiss Turning CNC MILL/TURN MACHINES: (3) Mori-Seki NT 3200SZM/1000, 9 axis Turn/Mill Center, 5,000 RPM spindle and 40 tool A.T.C., one 12 station turret,
Course Name. List of Experiments/Exercises:
Course code Course Name L-T-P- Credits Year of Introduction ME334 MANUFACTURING TECHNOLOGY LABORATORY II Prerequisite: ME3 Metrology and Instrumentation 0-0-3-06 Course Objectives: To provide programming
DESIGN AND INSPECTION
DESIGN AND INSPECTION DESIGN EQUIPMENT 5 - Seats of Pro Engineer - Creo with Mold Design Solid Modeling CAD Software 1 - Seat of SolidWorks- 2017 Solid Modeling CAD Software 5 - Seats of Visi Version 21
Facilities Overview. CNC Milling, Drilling Milling Lathe Grinding Drilling Welding Engineering Support Inspection Machine Assembly & Testing
Facilities Overview 120,000 square feet of our Warrington, Pennsylvania headquarters is dedicated to developing prototypes, contract manufacturing, custom machines, and assembly. CNC Milling, Drilling
Koster Industries, Inc.
Koster Industries, Inc. Rinaldi Precision Machine Co. Inc. - CNC Machine Shop Vertical machining centers, Leadwell, Fanus, CNC lathes, Johnford, Ikegai, Feeler speed lathe, Turret lathe, Vertical bandsaw,
BLADES ENTERPRISES, LLC Trans X Drive Novi, MI Tel: Fax:
CAGE CODE: 59V92 DUNS# 826846284 JCP Cert# 0051780 NAICS: 332116, 332212, 332213, 332710, 332721, 332722, 332999, 333512, 333513, 333514,333515, 333518, 333613, 333992, 336992 FSC: 1005, 1010, 1015, 1020,
HIGH PRECISION CNC TURNING & MACHINING FACILITY
GUHRING GU-SS227 automatic drill MAZAK QT-35N-C CNC chucker Surplus to the Ongoing Needs of CAMERON VALVES & MEASUREMENTS 2005 MEGA BS-300A 13 automatic band saw 1999 TWIN PALLET MAZAK HTC-400 CNC Horizontal
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
(8th Nov 2018) MJS Engineering Services
(8th Nov 2018) MJS Engineering Services 1st Machinery Auctions are offering a complete plant clearance on behalf of MJS Engineering Services due to retirement. Online Auction Date: Thursday 8th November
Tool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
Copyright 2007 Sematco, Inc. All Rights Reserved 275 Eastpark Drive - Roanoke, VA 24019
Sematco employs a willing and talented workforce capable of identifying and solving difficult problems through ingenuity and work ethic. We produce quality parts in a cost efficient manner that consistently
ONLINE ONLY AUCTION COMPLETE PLANT CLOSING
decosmo www.di.com ONLINE ONLY AUCTION J.R.K. PRECISION MACHINING & Surplus to other AEROSPACE Mfgs. 25 Century Street, Agawam, MA 01001 decosmo www.di.com 4-Axis w/ High Speed Look Ahead NEW 2010 1 of
PUBLIC AUCTION LATE MODEL MACHINING & MULTI PALLET SYSTEMS
A A AMERICAN AUCTIONEERS AMERICAN AUCTIONEERS GROUP 1146 N Central Avenue #535 Glendale, California 91202 Phone: 818-763-2021 Fax: 818-291-9495 WWW.AAGAUCTION.COM PRESORTED First-Class Mail U.S. Postage
Precise. Proven. Dedicated.
Precise. Proven. Dedicated. Right Precision aerospace components manufactured to the highest quality. Major OEMs, the Federal Government, and industry distributors rely on our 70+ years of USA-based manufacturing
PRESTIGE EXTREME MACHINING & MFG CAPITAL BLVD. CLINTON TOWNSHIP, MI PHONE FAX
PRESTIGE EXTREME MACHINING & MFG. 24700 CAPITAL BLVD. CLINTON TOWNSHIP, MI 48036 PHONE- 586-868-4000 FAX- 586-868-4004 Your full service 3 & 5 Axis CNC high speed machining source. Specializing in 2D &
Total Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
Boring Mill Nomura One B100-WP 5"-50 Taper-30 HP 48" x 96" 96" 43" 60" Outriggers-Digital Readout-Pendant Control. 40 Taper-12,000 RPM
Liberty 3D Technologies, Inc. Equipment List (Updated 3/16/18) Metal Cutting Machining Centers Horizontal Mill Machining Centers Machine Type Machine Brand Quantity Model Spindle Table Size Table Travel
Manufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
MACHINES SPECS
MACHINES SPECS 2018-2019 2 CNC Tube Laser Machine Detail Sheet CNC Tube Laser Cutting Trumpf Model: TruLaser Tube 5000 Table Travel : 6500mm Operation : Tube cutting Unit : 1 Max. work piece weight : 20
Equipment List 08/24/2012
Equipment List 08/24/2012 CNC Milling Capacity Qty Excel 810T24 Vertical Machining Center 31.19 x 20.10 x 22.00 12 HP (2) 10,000 RPM w/rigid Tapping Golden Sun MPS-80 Pallet Shuttle Excel HMC-400T32 Horizontal
Machine Tool Technology/Machinist CIP Task Grid
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
Facilities List. WIRE EDM MACHINES (2-New) Mitsubishi FA-20S w/45 Deg. Taper Cutting
Date: August 2011 Facilities List WIRE EDM MACHINES (2-New) Mitsubishi FA-20S w/45 Deg. Taper Cutting Fine Finish Power Supply (FM) Max. Workpiece: 41.3 x 31.5" x 11.86" High Table Travel: 13.80" x 19.80"
Strands & Standards MACHINING 2
Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill
ONLINE CNC & TOOLROOM AUCTION
ONLINE CNC & TOOLROOM AUCTION CNC SWISS TURN LATHES CNC MACHINING CENTERS FABRICATING EQUIPMENT GRINDERS PARTS CLEANING Surplus Equipment of: NSA Industries 815 Industrial Parkway, St. Johnsbury, Vermont
EQUIPMENT LISTING CNC
CNC Mills Mazak Vertical Machining, Variaxis 500-5X/2, Full 5 Axis High Speed Machining Center with Matrix Control 60 Tool Magazine, Thru Spindle Coolant. X axis 20.08, Y axis 20.08, Z axis 18.11, A axis
MACHINE SHOP (420) Machine Shop (420)
Machine Shop (420) 2019-2020 1 MACHINE SHOP (420) 420-120. Machine Tool/Fabrication. (2 Credits) This course is designed to provide fabrication students with knowledge and applications of machine tool
BIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
Entry Level Assessment Blueprint Precision Machining
Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures
LARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY
PUBLIC WEBCAST AUCTION LARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY AUCTION: THURSDAY, APRIL 28 AT 10:00 AM CDT INSPECTION: WEDNESDAY, APRIL 27 FROM 8:00 AM TO 4:00 PM
O.P. Schuman & Sons, Inc County Line Road Warrington, PA Tel Fax opschuman.com
O.P. Schuman & Sons, Inc. 2001 County Line Road Warrington, PA 18976 Tel 215.343.1530 Fax 215.343.1633 opschuman.com N.C. MILLING & DRILLING FACILITIES Programming 3 Stations Master Cam/Full 3-D Programming
ONLINE AUCTION Assets Surplus to the Ongoing Requirements of
ONLINE AUCTION Assets Surplus to the Ongoing Requirements of MANUFACTURER OF HIGH-PRECISION UTILITY SYSTEMS & DIGITAL IMAGING FOR THE DENTAL INDUSTRY Featuring: STAR CNC Swiss-Type Automatic Lathes, OKUMA
Maximum weight on spindle: 700kg chucking work/2000kg shaft work 116.5mm max bar diameter Travel X,Z,C: 362mm x 2155mm x 360
FUTURE ADVANCE MANUFACTURE / CNC TURNING CNC TURNING Doosan Puma 400L High speed Fanuc 32iT control 770mm swing over bed 590mm swing over saddle 560mm maximum turning diameter 2.028m maximum workpiece
Course Title: Advanced Manufacturing Technology MACH 110 Instructor: Conrad Mercurius Contact Information: Conrad.Mercurius@raritanval.edu Course Meeting Dates, Days, and Times: Total # hours: 250 Course
Tech 046: Machine Operation and Management. Course Syllabus
SAN JOSE STATE UNIVERSITY Department of Aviation and Technology Tech 046: Machine Operation and Management Course Syllabus Semester and Year: Fall, 2013 Course Sections: 1 & 11 Course Code: S1: 43304 Class
2141 W. 139th St., Gardena, CA TEL: (310) , FAX: (310)
2141 W. 139th St., Gardena, CA 90249 TEL: (310) 538-0015, FAX: (310) 538-9050 www.centurype.com Quality Policy Century Precision Engineering is committed to; 1. Achieving Outstanding Quality with On-Time
BIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
FACILITIES LIST. PH Fax Registered government contractor- CCR Registered Cage Code 3AV26
FACILITIES LIST PH 781-245-5966 Fax 781-245-5967 Email: info@fitzmachine.com Registered government contractor- CCR Registered Cage Code 3AV26 President: Kathleen Fitzgerald VP Operations: Edward Fitzgerald
Auction Catalog. Auction Date:
Auction Catalog CNC Turning and Screw Machinery Shop Closing, (Online), Location: Gilbert, AZ Auction Date: Tuesday, February 20, 2018 Bidding Starts: 10:00 AM (Arizona Time) KD Auctions 7918 E.McClain
El Dorado Molds, Inc.
El Dorado Molds, Inc. 09-21-18 Facility and Equipment List Building Information: A total facility area of 93,800 sq. feet is shared with our sister company, Northern California Injection Molding. El Dorado
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute
OUR EXPERTISE HAS BEEN BUILT ON A HISTORY OF ENGINEERING CRAFTSMANSHIP, VISIONARY DESIGN, QUALITY MANUFACTURE AND CUSTOMER CARE DATING BACK TO 1903.
MACHINING SERVICES The Company OUR EXPERTISE HAS BEEN BUILT ON A HISTORY OF ENGINEERING CRAFTSMANSHIP, VISIONARY DESIGN, QUALITY MANUFACTURE AND CUSTOMER CARE DATING BACK TO 1903. The facility in Scotland
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
Forrest MACHINE PRODUCTS CO. LTD. Any questions? FORREST MACHINE PRODUCTS CO. LTD When Precision Quality Counts
Forrest MACHINE PRODUCTS CO. LTD. Any questions? 139 S. Illinois Ave. Mansfield, OH 44905 P: 419-589-3774 / www.fmpcorp.com CO. LTD ABOUT US Manufacturing precision screw machine products for over 35 years.
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
Machining I DESCRIPTION. EXAM INFORMATION Items
EXAM INFORMATION Items 50 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble,
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations.
MTT Date: 09/13/2018 TECHNOLOGY MTT Machine Tool Technology--AA Students apply industry standard safety practices and specific safety requirements for different machining operations. Students calculate
CNC TURNING. Maximum weight on spindle: 700kg chucking work/2000kg shaft work 116.5mm max bar diameter Travel X,Z,C: 362mm x 2155mm x 360
CNC TURNING CNC TURNING Doosan Puma 400L High speed Fanuc 32iT control 770mm swing over bed 590mm swing over saddle 560mm maximum turning diameter 2.028m maximum workpiece length Maximum weight on spindle:
PDF - LATHE MACHINING OPERATIONS DOWNLOAD
02 March, 2018 PDF - LATHE MACHINING OPERATIONS DOWNLOAD Document Filetype: PDF 524.74 KB 0 PDF - LATHE MACHINING OPERATIONS DOWNLOAD For metal lathe, mini lathe, milling other general machining operations.
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Cnc Grinder Jig Grinding Manual READ ONLINE
Cnc Grinder Jig Grinding Manual READ ONLINE If searched for the ebook Cnc grinder jig grinding manual in pdf format, in that case you come on to right website. We presented complete edition of this book
HIRING COMPANY: Dynomax Inc. INDUSTRY: Aerospace and Defense POSITION: CNC Programmers, Machinists, Operators
CNC Programmers, Machinists, Operators Dynomax is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/cnc milling
Machine Tool Technology/Machinist CIP Task Grid
1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and
Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018
Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational
BIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
WorldSkills - Infrastructure Lists. Berufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009
Page 1 of 10 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 06 INFRASTRUCTURE CNC LIST Turning Concours Mondial des Metiers CNC CNC TournageDrehen Position: Contact: Details: Email: Phone:
BTI inc. ISO CNC Contract MFG Services Div. OVER SQ FT OF MANUFACTURING AREA
CNC Contract MFG Services Div. Specialized in Long & Short runs 3 & 4 Axis, 3D Machining CNC Machining CNC Turning Precision Sheet Metal Fabrication & Welding Certified OVER 25000 SQ FT OF MANUFACTURING
Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
Pennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
Metropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB:
Course Title: Machine Tool II Course Prefix & No.: PRMA 1402 LEC: 9 LAB: 0 Credit Hours: 9 COURSE DESCRIPTION: Students construct basic machine projects using various pieces of shop equipment including
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Precision Repair and Calibration 9150 Isanti Street NE Blaine, MN 55449 Jane McDougall
CLT Auctions. Manual & Light CNC Machine Shop. Ends from Mar 06, am EST (3pm GMT) Description
CLT Auctions Manual & Light CNC Machine Shop Ends from Mar 06, 2019 10am EST (3pm GMT) 4400 Friendship Dr STE C Matthews North Carolina 28105 United States Lot Description 1 MITEE-BITE T slot kit 2 Vise
Okuma Lathe Osp5000 Programming Manual READ ONLINE
Okuma Lathe Osp5000 Programming Manual READ ONLINE If you are searched for a ebook Okuma lathe osp5000 programming manual in pdf form, in that case you come on to the correct website. We present the complete
FANUC CNC MANUALS viviso.com FANUC CNC MANUALS. page 1 / 5
page 1 / 5 page 2 / 5 fanuc cnc manuals pdf Fanuc Manuals Instruction Manual and User Guide for Fanuc. We have 655 Fanuc manuals for free PDF download. Fanuc Manuals User Guides - CNC Manual Read & Download
Loudon Industries, Inc. Facility List
Loudon Industries, Inc. Facility List 1 2 Thank you for your interest in Loudon Industries, Inc. We offer a diverse range of machining and engineering capabilities to satisfy our customers diverse requirements.
LOT # QTY DESCRIPTION NOTES
1 1 MACHINE VISE 2 1 MACHINE VISE 3 1 MACHINE VISE 4 1 MACHINE VISE 5 1 MACHINE VISE 6 1 MACHINE VISE 7 1 METAL CART 8 1 - PNEUAMATIC IMPACT WRENCH & AIR CHISSEL 9 1 HOT PLATE 10 1 - SKILSAW & SAWZAWL
MACHINE SHOP EQUIPMENT AND TOOLS FOR SALE. Todd S. Gupton Phone: (832) OPEN SHOP
MACHINE SHOP EQUIPMENT AND TOOLS FOR SALE Todd S. Gupton Email: tsgupton@gmail.com Phone: (832) 260-8308 OPEN SHOP SATURDAY - MARCH 25, 2017 9:00 AM TO NOON 1100 DEATS ROAD DICKINSON, TX 77539 White brick
H.G.Cockrill Corporation
Materials experience Aluminum 2011,2024,2017 5052,6061,6063 Investment castings Sand castings (continued) H.G.Cockrill Corporation Catalog and Buyer s guide Iron and steel alloys Products, Capabilities,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti
Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
Metrology and instrumentation Indian Institute of Technology
Metrology and instrumentation Indian Institute of Technology SOURCE: S. KALPAKJIAN BOOK SLIDE-WAY CROSS-SECTION Cross-section of a machine tool slide-way. The width, depth, angles, and other dimensions
Updated January 2019 METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES GRINDING MACHINES HORIZONTAL LATHES. Page 1 of 7 MACHINE DESCRIPTION 3541.
METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES JIG BORING 3541.205 BORING, HBM QUILL FEED SPINDLES CNC OR MANUAL 3541.207 DRILLING, NON-NC 3541.215 SENSITIVE VERTICAL DRILLING MACHINES, MANUAL 3541.216
Ampex Metal Products - Facilities List 2018
CERTIFIED QUALITY MANAGEMENT SYSTEM 5581 W 164 TH Street Brook Park, Ohio 44142 P. 216-267-9242 F. 216-267-1135 Stamping Presses Ampex Metal Products - Facilities List 2018 1 - Minster 600 Ton E2 High
Company Profile As on 1 st April 2015
General Information Company Profile As on 1 st April 2015 Name: PRASHTECH ENGINEERS PVT. LTD. (Formerly PRASHTECH PRODUCTS Estd. 1996) Registered Office & Factory: 1274, Shed No. 1, Sai Om Industrial Estate,
July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK. Program Title: Machining Occupational Area: Industrial Education
July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK Program Title: Machining Occupational Area: Industrial Education Components: One Core, Four Occupational Completion Points Secondary
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
Name Code INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 MECHANICAL ENGINEERING TUTORIAL QUESTION BANK : ENGINEERING METROLOGY : A50318 Class : III B.Tech I Semester Branch
NAMEPLATE. For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools.
NAMEPLATE PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 NAMEPLATE For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools. Today, Clausing
DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING
DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING DM&E Corporation PO Box 580 Shelby, NC 28151-0580 (704) 482-8876 Fax: (704) 484-8326 Email: sales@dmecutter.com Website: www.dmecutter.com Updated January
Total Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Principles of CNC Machining Introduction to CNC Machines Basics of the CNC Lathe and Mill Coordinates for the CNC Lathe and Mill Unit 3: Introduction
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.