HAND TOOL CATALOGUE 2015
|
|
|
- Ruby Irma French
- 6 years ago
- Views:
Transcription
1 S INCE Quality Concrete & Construction Equipment HAND TOOL CATALOGUE 2015 VOLUME 3
2 MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS Copyright 2015 Parchem Construction Supplies Pty Limited This publication is copyright. All rights are reserved. Reproduction in whole or in part is prohibited without written permission. Application details are provided as a suggestion only of intended use. This catalogue is produced as a guide to the product range. Some items may not be available at all outlets. Owing to a continual product improvement, designs & specifications may be subject to change without notice.
3 POINTED TROWELS MAGNESIUM FLOATS Hard Plastic Handle FP1001 FP1009 FP1009P FP1091 FP1091P FP1092 ProSoft Handle POINTED TROWEL - 120W x 365L - PROSOFT HANDLE POINTED TROWEL - 100W x 355L - PROSOFT HANDLE POINTED TROWEL - 100W x 355L - PLASTIC HANDLE POINTED TROWEL - 115W x 405L - PROSOFT HANDLE POINTED TROWEL - 115W x 405L - PLASTIC HANDLE POINTED TROWEL - 115W x 450L - PROSOFT HANDLE DESCRIPTION END CORNERS FP2051 MAGNESIUM FLOAT - 80W x 405L - PROSOFT HANDLE Square FP2052 MAGNESIUM FLOAT - 80W x 510L - PROSOFT HANDLE Square HARD WOOD FLOATS FP1093 POINTED TROWEL - 115W x 500L - PROSOFT HANDLE FP8001 WOOD FLOAT - 112W x 300L - PROSOFT HANDLE SQUARE TROWELS FP8002 FP8024 WOOD FLOAT - 112W x 380L - PROSOFT HANDLE WOOD FLOAT - 65W x 600L - PROSOFT HANDLE FP2051H MAG / WOOD FLOAT - REPLACEMENT PROSOFT HANDLE ADHESIVE SPREADERS FP1002 FP1002P FP1002O SQUARE TROWEL - 120W x 280L - PROSOFT HANDLE SQUARE TROWEL - 120W x 280L - PLASTIC HANDLE SQUARE TROWEL - 120W x 280L - PROSOFT OPEN HANDLE FP1QTF2 FP1QTF SQUARE TROWEL - NOTCHED SQUARE TEETH - 115W x 280L SQUARE TROWEL - SERRATED TEETH - 115W x 280L FP1081 SQUARE TROWEL - 115W x 405L - PROSOFT HANDLE FP1081P FP1081O SQUARE TROWEL - 115W x 405L - PLASTIC HANDLE SQUARE TROWEL - 115W x 405L - PROSOFT OPEN HANDLE MARBLE SHEEN TROWELS STEEL FLOATS - STAINLESS STEEL FP1021 FP1022 MARBLE SHEEN TROWEL - 100W x 350L - PROSOFT HANDLE MARBLE SHEEN TROWEL - 100W x 450L - PROSOFT HANDLE KNEELING BOARD FP2009S FLOAT - STAINLESS STEEL - 160W x 210L - PROSOFT HANDLE FP2019S FLOAT - STAINLESS STEEL - 150W x 380L - PROSOFT HANDLE FP2029S FLOAT - STAINLESS STEEL - 100W x 290L - PROSOFT HANDLE FP CONCRETERS KNEE BOARD HAND TOOL CATALOGUE 3
4 VEE JOINTERS - STAINLESS STEEL VARIABLE POSITION SCREEDS FP3001S DESCRIPTION V-JOINTER - STAINLESS STEEL - 75W x 10D - PROSOFT HANDLE FS0012 FS0015 DESCRIPTION CONCRETE SCREED - CLAMPED HANDLE - 1.2m (LEVEL VIAL) CONCRETE SCREED - CLAMPED HANDLE - 1.5m (LEVEL VIAL) FP3002S V-JOINTER - STAINLESS STEEL - 150W x 12D - PROSOFT HANDLE FS0018 CONCRETE SCREED - CLAMPED HANDLE - 1.8m (LEVEL VIAL) FP3012S V-JOINTER - STAINLESS STEEL - 150W x 20D - PROSOFT HANDLE FS0021 CONCRETE SCREED - CLAMPED HANDLE - 2.1m (LEVEL VIAL) FS0024 CONCRETE SCREED - CLAMPED HANDLE - 2.4m (LEVEL VIAL) FS0027 CONCRETE SCREED - CLAMPED HANDLE - 2.7m (LEVEL VIAL) JOINT CAST TOOLS FS0030 FS0036 FS0042 FS0045 CONCRETE SCREED - CLAMPED HANDLE - 3.0m (LEVEL VIAL) CONCRETE SCREED - CLAMPED HANDLE - 3.6m (LEVEL VIAL) CONCRETE SCREED - CLAMPED HANDLE - 4.2m (LEVEL VIAL) CONCRETE SCREED - CLAMPED HANDLE - 4.5m (LEVEL VIAL) FP11A FP13B FP18E FP19G CAST V-JOINTER - 75W x 150L x 10D - PROSOFT HANDLE CAST V-JOINTER - 75W x 150L x 12D - PROSOFT HANDLE CAST V-JOINTER - 75W x 200L x 25D - PROSOFT HANDLE CAST STEP TREAD TOOL - 75W x 150L - PROSOFT HANDLE FS0048 FP1080H CONCRETE SCREED - CLAMPED HANDLE - 4.8m (LEVEL VIAL) CONCRETE SCREED - REPLACEMENT HANDLE (LEVEL VIAL) FP1080HC CONCRETE SCREED - REPLACEMENT CLAMP KIT (PK 2) FPCSP CONCRETE SCREED - REPLACEMENT END PLUGS (PK 2) Clamp on style handle which may be reversed to the working face for second use. Fitted with end plugs as well as powder coated for easy clean up. NB. Sizes of mm may not be sufficiently rigid for close tolerance work. EDGERS - STAINLESS STEEL CONCRETE RAKES CC013 CC012 CC011 CC010-1 CC010-1 CONCRETE PLACING RAKE - DUAL SIDED - FLAT BLADE & SAW TOOTH FP4001S EDGER - STAINLESS STEEL - 75W x 12D x 5R - PROSOFT HANDLE CC011 CONCRETE PLACING RAKE - PULL TYPE FP4002S EDGER - STAINLESS STEEL - 75W x 12D x 6R - PROSOFT HANDLE CC012 CONCRETE PLACING RAKE - PUSH TYPE FP4003S EDGER - STAINLESS STEEL - 75W x 19D x 10R - PROSOFT HANDLE CC013 CONCRETE PLACING RAKE - DUAL SIDED - PUSH & PULL FP4006S EDGER - STAINLESS STEEL - 100W x 14D x 6R - PROSOFT HANDLE FP4008S FP4013S EDGER - STAINLESS STEEL - 75W x 19D x 19R - PROSOFT HANDLE EDGER 45 DEGREE BEVEL - STAINLESS STEEL - 100W x 25D - PROSOFT HANDLE SHOVELS FP7003S EDGER - STAINLESS STEEL - 112W x 19D x 25R - PROSOFT HANDLE FP7006S EDGER - STAINLESS STEEL - 105W x 14D x 10R - PROSOFT HANDLE FP7008S EDGER - STAINLESS STEEL - 140W x 19D x 20R - PROSOFT HANDLE ARW023 STEEL SHOVEL - LONG HANDLE - POST HOLE mm FP7001S EDGER - STAINLESS STEEL - 150W x 24D x 25R - PROSOFT HANDLE ARW026 STEEL SHOVEL - LONG HANDLE - SQUARE MOUTH mm FP7002S EDGER - STAINLESS STEEL - 112W x 22D x 12R - PROSOFT HANDLE MH-GT75 STEEL SHOVEL - D-HANDLE mm FP7012S EDGER - STAINLESS STEEL - 152W x 16D x 13R - PROSOFT HANDLE ARW025 STEEL SHOVEL - D-HANDLE mm 4 PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN
5 HANDLES & ADAPTORS WALKING TROWELS FW-555 WALKING TROWEL - ROUND ENDS - 600mm LENGTH (M) FEATURES FH0076 HANDLE - TELESCOPIC EXTENSION m to 5m Lock nut handle length adjustment FW-557 WALKING TROWEL - STAINLESS STEEL - ROUND ENDS - 600mm FH0588 HANDLE - CLIP TOGETHER - 1.8m Clip together handle FP10076E HANDLE - TELESCOPIC ADAPTOR 25-32mm Removable adaptor tube FP2051H HANDLE - WOOD & MAGNESIUM FLOAT FRESNO TROWELS FPSB HANDLE - TROWEL ADAPTOR - STANDING BRACKET ALUMINIUM BULLFLOATS FF-607 FF-609 FRESNO TROWEL - TILT MECHANISM - 600mm FRESNO TROWEL - TILT MECHANISM - 900mm FB0600 FB0900 FB1200 FB1500 BULLFLOAT - ALUMINIUM - 600mm BULLFLOAT - ALUMINIUM - 900mm BULLFLOAT - ALUMINIUM mm BULLFLOAT - ALUMINIUM mm BOLT CUTTERS FB1800 BULLFLOAT - ALUMINIUM -1800mm FP10063M BULLFLOAT - REPLACEMENT TILT MECHANISM ARW094 ARW095 BOLT CUTTERS - 750MM BOLT CUTTERS - 900MM WALKING TOOLS - STAINLESS STEEL HAMMERS FP2009SW WALKING FLOAT - STAINLESS STEEL - 160W x 210L FP2019SW WALKING FLOAT - STAINLESS STEEL - 150W x 380L FP7002SW WALKING EDGER - STAINLESS STEEL - 112W x 22D x 12R ARW033 STONING HAMMER - F/GLASS SHORT HANDLE - 4LB FP3002SW WALKING V-JOINTER - STAINLESS STEEL - 150W x 12D ARW034 STONING HAMMER - F/GLASS LONG HANDLE - 4LB CONCRETE FINISHING BROOMS ARW041 ARW042 ARW043 ARW044 SLEDGE HAMMER - HICKORY HANDLE - 8LB SLEDGE HAMMER - HICKORY HANDLE - 10LB SLEDGE HAMMER - HICKORY HANDLE - 12LB SLEDGE HAMMER - HICKORY HANDLE - 14LB FB-1572 CONCRETE FINISHING BROOM - 600mm CAULKING GUNS FB-1573 CONCRETE FINISHING BROOM - 750mm FB-1574 CONCRETE FINISHING BROOM - 900mm ARW055 CAULKING GUN - SUITS SUASAGE TYPE CARTRIDGE 380MM HAND TOOL CATALOGUE 5
6 FLAT FLOOR TOOLS These extruded magnesium flat floor tools are specifically designed to improve floor or pavement flatness. Each tool comes standard with three 1.8 m clip-together aluminum handles, stablising outriggers and equalizer pitch adjusting head for precise, even control. BUMP CUTTER Cuts down bumps and fills low areas after concrete slab has been floated. CHECK ROD Reduces bumps and fills low areas while the concrete is still plastic. CHANNEL FLOAT Use in place of traditional bull floats for flatter floors. Bump Cutter Check Rod BUMP CUTTER CHECK ROD CHANNEL FLOAT Product Code FR-3000BC FR-3000CR FR-3000CF Channel Float Operating Weight kg Extrusion Length m (ft) 3.1 (10') 3.1 (10') 3.1 (10') Dimensions (w x h)) mm (in) 51 x 102 (2' x 4') 102 x 51 (4' x 2') 152 x 51 (6' x 2') HEAVY DUTY BULLFLOAT These heavy duty bullfloats are the concrete placers workhorse. This hard wearing tool is made from the highest quality extruded material for added strength and longer life. Comes complete with H/D worm pitch drive and three 1800mm clip together handles. MESH CAGE ROLLER Mesh rollers are used to push fibre mesh and aggregate into the surface of the concrete. Proper imbedding of both fibres mesh and aggregate greatly assisting when finishing with power trowels. FR-900MR HEAVY DUTY MESH CAGED ROLLER - 900mm FR-1200MR HEAVY DUTY MESH CAGED ROLLER mm FR HEAVY DUTY BULL FLOAT - ALUMINIUM - 900mm FR HEAVY DUTY BULL FLOAT - ALUMINIUM mm ACCESSORIES PRODUCT CODE AEC HEAVY DUTY PITCH CONTROL BRACKET MATERIAL SPREADER Used for spreading dry shake materials such as Sicaltop & Decorative colour hardeners FEATURES 40kg hopper capacity Adjustable spreading rate from 0.5kg/m 2 to 2.5kg/m 2 Mesh roller pushes material to the surface Hopper includes integrated bag breakers Hand activated lever opens/closes discharge gate to start/stop material flow FR-ADAPTORMR MESH ROLLER TO HANDLE ADAPTOR PRODUCT CODE FR-HANDLE HEAVY DUTY HANDLE - CLIP TOGETHER TYPE - 50 x 1800m BM-TV-830 MATERIAL SPREADER 6 PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN
7 NOTES HAND TOOL CATALOGUE 7
8 S INCE Flextool is a division of: Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: ABN
Concrete Finishing. Flat Back Finishing Trowel. Round End Finishing Trowels. To order Concrete Finishing
Concrete Finishing Concrete Finishing To order Square End Finishing Trowels 620004 12 x 3 Square End Finishing Trowel 620006 12 x 4 Square End Finighing Trowel 620010 14 x 4 Square End Finishing Trowel
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
CONSTRUCTION TOOLS. Innovation is our mission!
CONSTRUCTION TOOLS Innovation is our mission! 1 PAGE SCRAPERS & TROWELS 736-738 FLOATS 738-739 2 3 4 5 6 7 JOINTING 739 8 9 SAND SIEVE 739 10 11 CONTAINERS 740 PLUMB LINE 740 SCREW CLAMPS 740-741 12 13
TOOLS & HARDWARE CATALOGUE MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS
TOOLS & HARDWARE CATALOGUE MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS Copyright 2014 Parchem Construction Supplies Pty Limited This
PRO Brake Operating Instructions
PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality
PRO Series Brakes Operating Instructions
PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,
OPERATIONS MANUAL. Featuring:
OPERATIONS MANUAL Used for commercial, architectural and industrial sheet metal fabrication Featuring: Pro Brake System Pro Accessories Setting up your Pro Brake Using your Pro Brake Snap Stand Set up
for Hardscapes BASIC TOOLs PAVEREXTRACTOR
BASIC TOOLs BASIC TOOLs for Hardscapes PAVEREXTRACTOR Why risk damaging surround pavers by using screwdrivers? The PAVEREXTRACTOR is the professional s answer to paver removal. The serrated, spring steel
Retail Price List Effective January 16, 2012
Retail Price List Effective January 16, 2012 1 of 7 Table of Contents SuperiorBilt Tools Page No. SuperiorBilt Tile Installation Tools Platinum Tools 3 Tile Cutters 3 Hole Saws 3 Saw Accessories 3 Nipper
ITEM CODE PRODUCT DESCRIPTION
Marshalltown - The Premier Line Marshalltown Magnesium Float Extruded from very hard durable, lightweight magnesium Comfortable handle is positioned to give the tool perfect balance Magnesium floats produce
INSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA
INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Sport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
Hynds Tool Range. Built Trade Tough
Hynds Tool Range Built Trade Tough P3 HYNDS TOOL RANGE BROCHURE 2017 Contents Insulated Non-Conductive Range P4-5 Shovels, Spades & Rakes P6-8 Wheelbarrow P8 Pliers & Shears P9 Wrenches P10 Allen Keys
Miter Saw Super Stand
Quality Power Tool Accessories OWNER S MANUAL Miter Saw Super Stand Models 2875/2875XL IMPORTANT Read and understand all safety guidelines and instructions carefully before operating. GENERAL INFORMATION
Walk-Behind Broadcast Spreader
January 1, 2019 Lit. No. 83679, Rev. 01 Walk-Behind Broadcast Spreader SP-8 & SP-8SS Parts List This document is for SnowEx SP-8 walk-behind broadcast spreaders beginning with serial numbers PD-288 and
NX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
UNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
Verge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip
Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION
MASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance
MASONRY TOOLS WASHINGTON PATTERN BRICK HAMMERS Our brick hammers are made of high-grade forged hammer steel Specially heat treated to maintain a keen cutting edge Perfectly balanced and superior in every
salto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
Please read and understand all instructions before beginning. These instructions cover impact and non-impact aluminum French Door 650/750.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
Heads AWM-HV VESA Head Dimensions Page 3 SNTB Notebook Holder Page 3
Technical Specification Atdec AWM Series Index Standard Product System Diagram Page 2 Heads AWM-HV VESA Head Dimensions Page 3 SNTB Notebook Holder Page 3 Arms AWM-A13 Overview Page 4 AWM-A46 Dimensions
Gardening. Sprayers/Rakes SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN RAKE - LAWN RUBBER SPRAY - PRESSURE 1.25 LITRE
SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN Versatile pressure sprayer for home and garden Adjustable nozzle provides a choice of single jet through to fine mist Trigger action for easy onehand
RUN-IN SHED INSTRUCTIONS
RUN-IN SHED INSTRUCTIONS 14321 5th Line Nassagaweya, Rockwood, ON, N0B 2K0 Phone 519-856-9959 ~ Fax 519-856-4141 Toll Free 1-800-461-3362 ~ Email sales@systemhorse.com Website www.systemfence.com RUN-IN
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
ALUMINUM Railing Systems
ALUMINUM A Railing Systems ALifetime Warranty 150 Orlan Road New Holland, PA 17557 800-633-7093 Fax: 717-355-7139 II _4693_1214 Aluminum Railing Systems Secondary Handrail III Offering exceptional versatility,
IF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
Complete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
Cambridge International Examinations Cambridge International General Certificate of Secondary Education
www.xtremepapers.com Cambridge International Examinations Cambridge International General Certificate of Secondary Education *2587041388* DESIGN AND TECHNOLOGY 0445/33 Paper 3 Resistant Materials October/November
NX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
Strongman Metal Tools Price list February 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list February 2018 PLEASE NOTE PRICES
APPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
ROOFSAFE ANCHOR & CABLE
Installation Instructions ROOFSAFE ANCHOR & CABLE THE ULTIMATE IN FALL PROTECTION MANUAL Contents Guidelines for Installation 3 Top Bolt Installation 4 Toggle Installation 5 Concrete Installation 6 Component
Offer expires: January 31, Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS
Offer expires: January 31, 2012 Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS NEW PRODUCTS $159.95 $104.99 *To Order Use Part# D010102-SPL Limited Time Offer: Buy An 8 Piece Stubby Ratcheting
Professional Tools for Craftsmen
TOOLS Professional Tools for Craftsmen Roofers Sheet Metal Workers TOOLS TOOLS Snips Genuine Aviation Snips 01280240 Stainless steel, compound leverage 09.45 x 3.15 0.83 lb. for stainless steel sheets,
INSTRUCTIONS *= RECOMMENDED += ACCEPTABLE N/A= NOT AN APPROVER INSTALLATION METHOD
Topic BASE PREPARATION Base Preparation Recommended Installation Methods pg.1 Tools/Materials Required pg.4 Site Work pg.1 Base Options pg.1-2 INTERIOR 4-5 Interior Installation General Information pg.2
PVC PIPE CUTTER, STAINLESS STEEL BLADE PVC PIPE CUTTER, STAINLESS STEEL BLADE PVC PIPE CUTTER PVC PIPE CUTTER PVC PIPE CUTTER, STAINLESS STEEL BLADE
PVC PIPE CUTTER, STAINLESS STEEL BLADE 606010-36 MPC-36 36mm PVC PIPE CUTTER, STAINLESS STEEL BLADE 606010-51 MPC-51 51mm PVC PIPE CUTTER 606010-42 MPC-42 42mm(1 5/8 ) PVC PIPE CUTTER 606010-64 MPC-64
NUMBER 1 Di-Acro Hand Notcher
OPERATOR S MANUAL & INSTRUCTIONS NUMBER Di-Acro Hand Notcher Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 373 Progress Street N.E. Canton, Ohio 705 330-55-9 330-55-00 (fax) Revised 0/0 Sale or distribution
Precision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM
Precision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM DobyGrip Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional
METALWORKS Wings Accent and Acoustical Clouds Installation Instructions
CEILING SYSTEMS Between us, ideas become reality METALWORKS Wings Accent and Acoustical Clouds Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Wings is a decorative ceiling element
MX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
KIT DAD OUT FOR THE SEASON
ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket
SKY TUNNEL COMMERCIAL INSTALLATION GUIDE ALL WORK CARRIED OUT BY THE INSTALLER SHOULD BE IN ACCORDANCE WITH LOCAL LAWS & SAFETY REGULATIONS.
XL 2 SKY TUNNEL COMMERCIAL INSTALLATION GUIDE ATTENTION: ALL WORK CARRIED OUT BY THE INSTALLER SHOULD BE IN ACCORDANCE WITH LOCAL LAWS & SAFETY REGULATIONS. Care must be taken when handling skylight components.
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
Hardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
Twin plate stanchions supporting folded metal panels
Twin plate stanchions supporting folded metal panels design elements S1 Twin plate stanchions supporting folded metal panels S1 design Utilising folded plate as balustrade infill rather than the more common
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
Reed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
Drake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
Control Panel: The Electronic Power Crossfeed System converts
The Electronic Power Crossfeed System converts the standard Super Duty Saw from manual carriage control to a semi-automatic carriage feed. It is designed to produce the best possible result of cut quality,
PS Panel Saw Ø315mm Max. Blade Diameter $2, $2, Product Brochure For W700. Description. Features
PS-1810 - Panel Saw Ø315mm Max. Blade Diameter Ex GST Inc GST $2,690.00 $2,959.00 ORDER CODE: W700 MODEL: PS-1810 Max. Blade Diameter (mm): Ø315 Table Size (W x H) (mm): 820 x 800 Table Size With Extensions
METRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
BX62R Chipper Parts Manual. Prior to S/N 162R00282
Prior to S/N 162R00282 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing old, worn or broken parts
F-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
Municipal Utility Tractor
SEQ # 725-1113 March 2016 State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) Price quote for: Municipal Utility Tractor Vendor Name: Contact Person: Street Address: P.O. Box: City,
10 x 10 Arch Top Pergola
0 x 0 Arch Top Pergola I N S T A L L A T I O N G U I D E O P T I O N A L A C C E S S O R I E S Privacy Fence Panel System ( Panels & Middle Post Included) Bolt Down Bracket Kit (Set of ) Additional Shade
INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION
INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters
Wind Pump Construction
What Will You Need? Page 1 The following components can be found in your kit, and are needed to build one wind pump: 50 Tooth Gear* 40 Tooth Gear* 20 Tooth Gear* 10 Tooth Gear* Wheel Hub 300mm (~12in)
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
JET JWBS-14DXPRO Band Saw
JET JWBS-14DXPRO Band Saw To satisfy a common woodworker s desire for increased vertical capacity we designed the JET JWBS-14DXPRO Band Saw to feature a full 12 of resaw capacity without the addition of
CHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
Mira Premium Series Bi-Parting French Sliding Patio Door Installation Instructions
PREMIUM SERIES W I N D O W S Mira Premium Series Bi-Parting French Sliding Recommended Tools & Accessories Tape Measure Level (3 or longer) Hammer Power Screwdriver Load bearing Shims Flashing (recommended)
ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
HAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
CUT-MATE PRO CUTTERS - Lineal Bearing, Dual Rail Tradesman Tile Cutters
ROMA TRADE CUTTERS - Dual Rail ECO Wall Tile Cutters 677054 ROMA Cutter 40mm Cut wall and floor tiles upto 40mm 677055 ROMA Cutter 500mm Cut wall & floor tiles upto 500mm.. VENEZIA TRADE CUTTER - Dual
TOOLS ARDEX TILING ACCESSORIES
ARDEX TILING ACCESSORIES TOOLS All of our tiling trade tools are of the highest quality and have been tested and approved by experienced professionals. TILING TROWELS All of our trade trowels are of the
800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
Diagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
Downtown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds
INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds Assembly and Installation Instructions 1. GENERAL 1.1 Product Description Wings is a decorative ceiling element consisting of a 10 foot long
Section Q-3: Bessey Clamps. Section Q-3: Bessey Clamps. Bessey Clamps. Last Updated: 07/02/10
Section Q-3: Bessey Clamps Section Q-3: Last Updated: 07/02/10 Section Q-3: K Body Parallel Clamps Series Maverick Hardware Large parallel jaw surfaces made from non-marring polyamide Internal steel frame
Industrial Strength Adhesive Works in all Climates
2011-MNI Industrial Strength Adhesive Works in all Climates Butyl Magic - A NEW Alternative to EternaBond EternaBond is a product of Adco Global Our Product Butyl Magic is a self-adhesive sealing tape
HOT KNIFE. Hot Knife CR CutRite. CARVE360 Cordless Hot Knife. Complete with Case. Complete with Case HEATS UP TO 10 WIRE
Hot Knife CR CutRite Complete with Case HOT KNIFE HEATS UP TO 10 WIRE 150 Watts Includes 4 & 6 Blade and Case Electronic Circuit Board Powered Variable Power Control Lightweight Stamped Blades Spring Loaded
K9 KIT INSTALLATION INSTRUCTIONS CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS
K9 KIT INSTALLATION INSTRUCTIONS 2005-2011 CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS TOOLS REQUIRED: Power Drill (Cordless preferable) Drill Bit Set Standard Wrench and Socket Set Metric
CARVE360 Pro EIFS Kit. Straight Blade Cutter & Groove Cutter Combo. Kit with 6 Groove Adapter EVERYTHING YOU NEED FOR EIFS HEATS UP TO 10 WIRE
Hot Knife CR CutRite Master Kit Straight Blade Cutter & Groove Cutter Combo HEATS UP TO 10 WIRE 190 Watts Electronic Circuit Board Powered Variable Power Control Lightweight Stamped Blades Spring Loaded
DobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
Roof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
Explorer Roof Rack Fitting Instructions: Roll Cage Mounted models only
Explorer Roof Rack Fitting Instructions: Roll Cage Mounted models only These instructions cover the fitting of the following rack models: RRL229 0FRC/0LRC/0SRC/0NRC - Defender 90 HT/SW Roll Cage Mounted
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
Experience the Hi-Lite Advantage
Experience the Hi-Lite Advantage 12K Aluminum Shoring System INTRODUCTION The 12K Shoring System is primarily a hand-set system. It can also be handled with a crane, and may also be used quite successfully
VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
Installation Instructions
Installation Instructions Alcove Enclosure Before Installation please check that your shower enclosure system is undamaged Please read these instructions carefully March 2015 TOOLS REQUIRED Electric or
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
Dura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
OptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
Drywall & Masonry TROWELS. Xtralite Finishing Trowels. Finishing Trowels w/durasoft Handle. Stainless Steel Swimming Pool Trowels
TROWELS Xtralite Finishing Trowels Finishing Trowels w/durasoft Handle Handle MXS91D 10.5" 4.5" DuraSoft MXS4D 11.5" 4.75" DuraSoft MXS56D 12" 3" DuraSoft MXS57D 14" 3" DuraSoft MXS73D 14" 4.75" DuraSoft
Sign & Display Products. Catalogue Sign Frames & Display Stands - Snap Frames - Sign Spikes TRADE-ONLY SUPPLIERS AUSTRALIA WIDE
Sign & Display Products Catalogue 2018 - A-Frames & T-Frames - Changeable Message Signs - Pull-up Banners and Stands - Banner & Flag StandS - Cafe Barriers - Flags & Fabric Printing - Sign Frames & Display
Hand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials
Hand Tool Identification Worksheet Name: Screw driver Purpose: To turn the screws Safety Facts: Don t use for prying or as a chisel Name: chisels Purpose: To remove/chip away materials Safety Facts: Always