Sawing. Accessories for Paint Removers / Planers. Accessories for Paint Removers. Accessories for Planers. Reversible carbide blades.

Transcription

1 Accessories for Paint Removers / Planers Accessories for Paint Removers Reversible carbide blades * * Suction hose Suction hose With bayonet fitting and rubber connector (internal Ø 30, outside Ø 35 ) Connector Ø: 58 / 35 Hose : 3.5 m Suction hose Ø: Accessories for Planers Reversible carbide planer blade Reversible carbide planer blade Consisting of 2 reversible carbide planer blades; as spare Reversible carbide planer blade Consisting of reversible carbide planer blades * Additional accessories for planers Clamp bracket for planer For stationary use of the planer (as surface planer) Clamp for fastening the stand securely on a workbench * Sawing Clamp For the secure fitting on a work table 62700*

2 Cordless Circular Saw Circular Saws Technical data Cordless Circular Saw KSA 18 LTX Type of battery pack Li-Ion / LiHD Battery pack voltage 18 V Swivel range from / to: 0 / + 50 Maximum cutting depth at Maximum cutting depth at Saw blade Ø x bore Ø 165 x 16 No-load speed 2,700 /min Max. cutting speed 23 m/s Weight (including battery pack) 4.3 kg Scope of delivery 6268 Carbide circular saw blade (18 teeth) Parallel guide / ripping fence Hexagonal wrench 2 Li-Power battery packs (18 V/5.2 Ah) ASC V»AIR COOLED«charger Equipment variants can be found in the Metabo price list and on the internet Product advantages Integrated LED work light for optimum illumination of the cutting line Brake area stops the saw blade quickly and improves safety Large range of applications thanks to the capability of angled cuts up to 50 Precise cuts with guide rail and adapter (accessory) Battery packs with capacity display for checking the charge status Technical data Circular Saw KS 55 Circular Saw KS 55 FS Rated input power 1,200 W 1,200 W Output power 670 W 670 W Maximum cutting depth at Maximum cutting depth at Saw blade Ø x bore Ø 160 x 20 Ø 160 x 20 Swivel range from / to: 0 / /+ 47 No-load speed 5,600 /min 5,600 /min Revolutions at rated load 4,400 /min 4,400 /min Max. cutting speed 47 m/s 47 m/s Torque 5 Nm 5 Nm Weight (without power cable) 4 kg 4 kg Cable 4 m 4 m Scope of delivery Carbide circular saw blade (18 teeth) Parallel guide / ripping fence Extraction connector Hexagonal wrench Product advantages Light, compact circular saw for universal construction site use Grip area with non-slip soft-grip surface Clearly visible cutting indicator for precise sawing after initial cut 0 position re-adjustable for highest cutting precision Robust circular saw, can be used directly on Metabo guide rails and rails of other manufacturers Light guide plate made from die cast aluminium Adjustment of machine without tools for using with the precision guide rail Extraction possibility by means of connecting an all-purpose vacuum cleaner System components Accessories 342 Battery packs 64 Extraction systems System components Accessories 342 Extraction systems

3 Plunge-cut Saw Circular Saws Technical data 340 Plunge Cut Circular Saw KSE 55 Vario Plus Rated input power 1,200 W Output power 700 W Maximum cutting depth at Maximum cutting depth at Saw blade Ø x bore Ø 160 x 20 Swivel range from / to: 0 /+ 45 No-load speed 2,000-5,200 /min Revolutions at rated load 5,200 /min Max. cutting speed 44 m/s Torque 5 Nm Weight (without power cable) 3.7 kg Cable 4 m Scope of delivery 62 Carbide circular saw blade (42 teeth) Parallel guide / ripping fence Extraction connector Hexagonal wrench Product advantages System components Combined plunge cut circular saw two high-quality functions in one machine Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the saw blade stop unexpectedly. Convenient saw blade change due to simultaneous pendulum saw guard and saw blade stop Particularly light due to magnesium die-cast saw housing and guide plate Grip area with non-slip soft-grip surface Sawing close to wall possible Accessories 342 Extraction systems 399 Precise, double-track aluminium parallel guide makes cutting to size easier Clearly visible cutting indicator for precise sawing after initial cut 0 position re-adjustable for highest cutting precision Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised speeds to suit the application material and speeds that remain almost constant, even under load Overload protection: protects the motor from overheating Extraction possibility by means of connecting an all-purpose vacuum cleaner Controllable chip ejection by means of rotating extraction nozzle Auto-stop carbon brushes to protect the motor Adjustment of machine without tools for using with the precision guide rail Technical data Circular Saw KS 66 Circular Saw KS 66 Plus Circular Saw KSE 68 Plus Rated input power 1,400 W 1,400 W 1,600 W Output power 800 W 800 W 850 W Maximum cutting depth at Maximum cutting depth at Saw blade Ø x bore Ø 190 x 30 Ø 190 x 30 Ø 190 x 30 Swivel range from / to: 0 / / /+ 45 No-load speed 4,200 /min 4,200 /min 2,000-4,200 /min Revolutions at rated load 3,200 /min 3,200 /min 4,200 /min Max. cutting speed 42 m/s 42 m/s 42 m/s Torque 9 Nm 9 Nm Nm Weight (without power cable) 5.5 kg 5.5 kg 5.6 kg Cable 4 m 4 m 4 m Scope of delivery ) Carbide circular saw blade ( teeth) Parallel guide / ripping fence Aluminium parallel guide Hexagonal wrench 1) also available in 0 V (North/Latin America) Product advantages System components Precise cuts with guide rail and matching adapter (accessory) Accessories 342 Extraction systems 399 Sturdy guide plate made from die cast magnesium Grip area with non-slip softgrip surface Adjustment of machine without tools for using with the precision guide rail Brake area for increased safety with quick saw blade stop Sturdy guide plate made from die cast magnesium Grip area with non-slip softgrip surface Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised speeds to suit the application material and speeds that remain almost constant, even under load Overload protection: protects the motor from overheating Adjustment of machine without tools for using on the precision guide rail Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the saw blade stop unexpectedly. Clearly visible cutting indicator for precise sawing after initial cut 0 position re-adjustable for highest cutting precision Lubrication system for long service life of the gear Extraction possibility by means of connecting an all-purpose vacuum cleaner Controllable chip ejection by means of rotating extraction nozzle Auto-stop carbon brushes to protect the motor 341

4 Circular Saw Blades CIRCULAR SAW BLADES: LONG SERVICE LIFE AND PRECISE CLEAN CUTS. The best cuts can be achieved with a harmonised system using quality circular saw blades. Metabo carbide circular saw blades offer precise and clean cuts thanks to laser cut expansion slots and ground carbide teeth. They are manufactured in accordance with Metabo quality specifications so that they achieve best work results in combination with our machines. The quality products offer a long service life and save you money. Application profiles of the Metabo circular saw blades Precision laser saw blades have a higher bonding strength than stamp-cut saw blades thanks to the due to their high face and rotation accuracy for precise cuts Lasered expansion slots ensure low-noise and low-vibration operation. Technical characteristics of the circular saw blades Clearance angle Tooth back Main blade Carbide tooth Cutting tip Rake Angle The rake angle The rake angle influences the cut quality, feed and cutting forces. It always correlates to the desired entry and exit angles to the workpiece. The size of the front rake angle depends on: The material to be processed (front rake angle decreasing: softwoods - hardwoods - chip materials - non-ferrous metals) The respective cutting quality required on one or both edges Tooth forms on the circular saw blades WZ alternately bevel-ground tooth Exceptionally clean cuts in all softwoods and hardwoods, woodfibre, laminate and plastic materials Easy to sharpen. With negative rake angle: Use on mitre saws FZ flat tooth Ideal for fast and coarse wise cuts in solid wood Simple to maintain FZ/TZ flat/trapezoid tooth Ideal for aluminium, copper and brass facing, plastic, coated chipboard and MDF boards and other wooden materials Very clean cuts With negative rake angle: Use on mitre saws Very high service life is achieved by the use of pure-grade carbides. Extremely long-lasting due to a tenfold plus re-sharpening potential. Our full range is clearly structured. We differentiate between Power cut, Precision cut and Multi-cut. This helps you to find the ideal saw blade. Positive and negative rake angle Positive rake angle: Easy cutting action - fast cutting Cutting power in the direction of the workbench (handheld circular saw) Workpiece edge: clean on the pos. neg. underside, without splinter guard poor on the upside Negative rake angle: More difficult cutting process - higher cutting power required from machine Cutting force in the direction of the workpiece support (mitre saws) Workpiece edge on the upper side better than on the underside The clearance angle If the clearance angle is too low, chip removal by the next tooth is not possible. A large clearance angle facilitates large chip removal. This is necessary for greater feeds. Entry and exit angles on the workpiece In most cases, the exit angle is unfavourable as opposed to the entry angle. For this reason the»good side«should be positioned upside down. FZ/FA flat tooth/chamfered flat tooth Used primarily for construction site and table saws, but also for highoutput circular hand saws Perfectly suited for construction wood, plywood boards (also with nails and concrete residue), chipboards Extremely robust teeth DZ/HZ roof/hollow tooth Ideal for boards coated on both sides Very precise and splinter-free cuts SP/NV pointed tooth, KV wolf tooth Used for construction site circular saws and log cutting saws or highperformance table saws Tooth shape only with circular saw blades made from chromevanadium steel Designation of the circular saw blades Example: For fast coarse and semi-fine cuts with continuous feed for low performance requirements Good cutting results for straight cuts in solid wood Partially suitable for construction wood with nails and concrete residue On coated wood or other composites, only coarse cut quality is possible Very wide range of uses in woodwork For very good, clean cut results for longitudinal or cross cutting in softwood and hardwood Well suited for hard wood and plywood, untreated chipboards, coated or veneered, MDF, composite materials High power consumption so the saw must have a high performance motor Universal use for demanding materials For the highest standards in cutting quality, e.g. for laminate, plastic, aluminium, copper and bronze materials Ideally suited for many interior work applications. Perfect cutting results, also on crosscuts in solid wood, coarse, coated or veneered chipboards, MDF The circular saw must have a very high performance power Relatively slow saw advance 8 Saw blade projection With increasing saw blade projection, the quality on the exit side decreases. It does not however improve on the entry side due to the lack of guidance effect. The ideal saw blade projection is between 8 and. Steel blade thickness Thinner blades are suited for thinner materials and require less power. Ideal for cordless applications. Thicker blades are particularly stable and are therefore suited for precise cuts in thicker materials on powerful saws. HW/CT 250 x 2.8/2.0 x 30; Z-80 FZ/TZ 5 neg; 2 NL HW/CT = wolfram/carbide tipped Other material descriptions: CV = chrome vanadium steel 250 = diameter 2.8 = cutting width 2.0 = thickness of base body in 30 = diameter of the bore Z=80 = number of teeth FZ/ TZ = flat trapezoid tooth shape 5 neg. = negative chip angle 2 NL = secondary hole holder

5 Circular Saw Blades Circular Saw Blades Which circular saw blade is suited to which machine? Circular Saw Blades,»Power Cut«Ø Ø Bo AEG HK 46 N AHK 52, H 50, HK 45/45 A/ N/46 S/50/52/717/727/737, HKS 52 HK 160 A/160 B/55/55 A/ B, HKS 55, K 55/55 E, CS 55, K 55 S/55 SE HK 66/66 E, KS 66 S HKE 66, HKS 65 A, K 66 E, CS 66, K 66 S/66 SE HK 190, HK 65, HKSE HK 75, CS 75, HK 75 A, 2 30 HKS 75 HKS 35/ MK Alko Pro 250 GK Pro-X, Holzmeister H/S/ NHS, Hobby, Basic, HS/3/4 W 450/ W 50 Profil RM 60, W RM 70, R Z70, TWM 70, TWZ 70, W 70 Atika Toptronic, PTK 250 S ATK 315H, BTA 90, HAT 315, HT 315 ABH 400, ABK ABH 450, ABK 450, ATU, BWK 450 ABH 500, ABK 500, BWK 500 BWK T 250 N, TK T 250 ECO Atlas Copco SGS 66 Q K 66 SE HK K 55 S MS 3 C MS 3 DB 3 30 Avola LH 315, TZV ZB 400, ZBV ZB 450, ZBV 450, IC ZB 500, ZBV KWK 600, RK KWK TZH BGU WK 600 W, KS WK 780 W, KS RK 775, WK 700 Black & Decker BD 365, PL 41, KS 1500 LK DN 800/8, SEC 818, 2 30 SR 700, BD 800 BD 800, KS 8/8, 2 30 HD 25 S, P 38 Bosch GKS 55/55 CE (neu) PKS GKS 65/65 GCE/66/ CE/68 BC GKS 75 S 2 30 GCM 800 SJ/8 SDE/8 SJL GKS 85 S GCM S/SD Ø Ø Bo GTS J/ XC GCM, GDL/SDE/JL 3 30 GTM JL 3 30 DeWalt DW DC930KA/KB D23650, DW 365/65/2365K, DWE575K, DWE576K DW 700/7/7/7/770/ /777 DW 383, D DW5/51/150/15/15/ /252/320/7/7/7/ 717/717XPS/720/742/743/ 743N/744/745/746/S778/ 744XP/745,DWS , 2151, 2154, 2155, L/-4L, L, DW70/160DS/3/ 80/80/80 2 DS, 160 DS, 1635, DW 8 DW 721/721KN/722/725/ /81/82/81 DW7/7/7/7/716/ E/718, D271/271/ 271XPS/271/272/ 273, DWS780 D DW20S/1600S/729KN C,1635, 6L, 2155, , , C K/L, BK, DA Einhell BHS 55, HK-G WIS 600/ WIS 700/ BT-TS 1500 U RT-CS 190/ RT-TS 1725 U BT-SM RT-SM RT-SM ELU MH MH MH 165/ ETS 30, RAS 51/53, TGS 170/171/172/173, ETS 21/23, TGS 271/273 Festool AP 553, ATF 55 FS, AT 55 EFS/55 EB AP 55/55 E/55 EB ATF 55/55 E/55 EB, TS 55/ RQ-Plus, TSC 55 Li REB-Basic HK 55 EBQ-Plus, HKC 55 EB Li-Basic AT 65/65 E AT 65 FS, ATF 65 B/65 E, AT 66 AP 65/65 E/65 EB TS 75/75 EBQ 2 30 Symetric SYM 70/SYM 70 E HK 85 EB HK 2 E Güde GKS 10 P, KT 2, GUKS 2 30 GWS 600 EC GTKS QWS GWS GWS 700 EC GTKS Ø Ø Bo GKS 250 L, TK 2400, TKGS 1800 GFO GFO Hitachi C6DA, FC6DA FC7SA, PSM-7, PSU C 7BU2/7U2/7MFA C8U/FA, PSM-8, PSU C8FC, CSU, CU C8FAFC/FS, C 8FSHE PSU C7U2, C7BU C LCH, C YA/YB, 3 30 C LSH Holz-Her 20, 21, 21, HKU264/50/550 21, 21, 21, 21, AP 55 EB, ATF 55 EB 24, 26, 27, 28, 29, , 27, 2269, 282, 22, DERBY, T65E 27, 29, AP 65 EB, AT 65 EB 2264, 2267, 2279, 2284, 2 30 PKS267/ HKD85/275, PKS/ //// 15/20/5275/275 HKS0/150/176/ HKSB7K, HKS277/ Holzkraft HWS HWS Kress CHKS KS, CHKS Mafell A 55, B 55, FU 55, KSS 400, KSS 330, MKS 55, MS 55, MT 55, PS 52/5 S, X 55, XE 55, KST 55, KSS 400/ V, PS 30 SE KSP 55/55 F, KST KS 320, PSS KSP 65 F, MKS ERIKA 60, KS 65, MS MKS 75/85 S, MS KSP 85/85 F ERIKA 85 L, MKS 85 S, MS 85, ERIKA 85 Ec BIBER, BIBEREX, FS 85, MKS 1/1 E, MONIKA, TFK 85/8 BSK 4/5/6, MKS 5, SF AZB, BK 3, FKB 150, FS 0 K/0 S, TD 3, TDH 4, TK 150, VKS 0/ 160, BSK 4 THD 425, TFS BK 4, BKV 4, BKS 5/6, FSG 165 K, MKS 185 E, TDH 450/5, FSG 200/240 K 170, BKV FSG 240, TSG Makita DCS551Y1J BR/NB/RDW, SR R R Ø Ø Bo Diameter in Ø Bore diameter in Ø Bo 57 RKB , 5800 RB LSFB, DLS7RME/ DLS7Z/DLS7Z 57 R, 57RKB R, 57RJ R R HS71J1, DHS7ZJ LS 2 30 LS15FL R /BR, SR R LH00FL, LS16LB BR, MS Milwaukee CS SCS 65 Q CS MS 216 SB M18 SMS MS 3 C, MS 3 DB Posch RZ R-700, RS 5, RZ4-700, RZ 700, TWEA-700CT, TWKE4-700, TWZ 700, WZ 700, WKE WE 5,5 700 C TWE 5,5 C, GS WKE 7,5 GS duo, RE 5.5 C Ryobi W 55 C W 666, W6615 X, WS 662, EWS 66 ETS ETS Scheppach TK 1685 Magnum, TS 4000, Duo 7.0, Bestcombi 7.0 Capas 3, Capas Forsato XL/XXL, TS 315, TK, TKH, TKU, TS 40, Tisa 5.0 BSH 500/ BS 500, BSH 500, WS KE 6/60/61, KH 6/60, KW 60/61/6 KD 2700, KE 70/70 M, KEZ 700, KH 70, KW 2700/70/70 M, KWZ 7/700 Wox d700s Precisa Forsa 4.0/6.0, 8.0/ Structo 5.0/ Capas SKIL 1873, H, 1526 H, 1873 H H, 1886 H H, 1985 U, 1986 U H Protool CSP 55/ CSP CSP Circular saw blades for circular saws Diameter x Cutting width x Bore For coarse and semi-fine cuts with continuous feed. Ideal for low & high powered machines Good cutting results for straight cuts in solid wood Partially suitable for construction wood with nails and concrete residue On coated wood or other composites, only coarse cut quality is possible Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for 152 x 2.4 x 20 HW/CT FZ Ks 52 S * 160 x 2.2 x 20 HW/CT WZ KS 54 / KSE 55 Plus / KSE 55 Vario Plus / KS 55 / KS 55 FS / KS 55 / KS 55 FS * 190 x 2.6 x 20 HW/CT WZ Ks 66 S / Ks 68 S * 190 x 2.2 x 30 HW/CT WZ KS 66 / KS 66 Plus / KSE 68 Plus * 190 x 2.2 x 30 HW/CT 16 FZ/FA 1.4 KS 66 / KS 66 Plus / KSE 68 Plus * 2 x 2.6 x 30 HW/CT 16 FZ Ks E 1678 S-Signal * 230 x 2.6 x 30 HW/CT 18 FZ/FA 1.8 KS * 230 x 2.6 x 30 HW/CT 24 WZ KS * Circular saw blades for semi-stationary/stationary circular saws Diameter x Cutting width x Bore Carbide circular saw blades For coarse and semi-fine cuts with continuous feed. Ideal for low & high powered machines Good cutting results for straight cuts in solid wood Partially suitable for construction wood with nails and concrete residue On coated wood or other composites, only coarse cut quality is possible Secondary holder for circular saw blades with Ø 216, 250, 254 and over 300 Number of teeth Tooth shape Steel blade thickness Rake Angle Suitable for 2 x 1.8 x 30 HW/CT 24 WZ KS 2 / KGS * 216 x 2.4 x 30 HW/CT 20 WZ neg. KS 216 M Lasercut / KGS 216 M / KGSV 216 M / KGS 216 Plus / KGSV 72 Xact / KGSV 72 Xact SYM * 216 x 2.4 x 30 HW/CT 24 WZ neg. KS 216 M Lasercut / KGS 216 M / KGSV 216 M / KGS 216 Plus / KGSV 72 Xact / KGSV 72 Xact SYM 250 x 2.8 x 30 HW/CT 24 WZ 2 25 PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi 3 / PK * * 250 x 2.8 x 30 HW/CT 24 WZ 2 3 neg. KS 250 / KGS 3 / KGS 3 / KGS * 254 x 2.4 x 30 HW/CT 24 WZ TS 254 / TK * 254 x 2.4 x 30 HW/CT 24 WZ neg. KS 254 Plus / KGS 254 M / * KGS 254 Plus / KGS 254 I Plus 300 x 2.8 x 30 HW/CT 28 WZ PK 300 / PKV 300 G to x 2.8 x 30 HW/CT 20 FZ TKHS 315 / KGT x 3 x 30 HW/CT 24 WZ 2 20 TKHS x 2.8 x 30 HW/CT 22 FZ TK 350 to x 3.5 x 30 HW/CT 28 FZ/FA 2.5 BKS 400 Plus x 3.5 x 30 HW/CT 60 WZ BKS 400 Plus x 3.5 x 30 HW/CT 32 FZ/FA 2.5 BKS 450 Plus / BKH 450 Plus x 3.8 x 30 HW/CT 66 WZ BKS 450 Plus / BKH 450 Plus x 3.8 x 30 HW/CT 22 WZ 2.8 BW 500 to x 3.8 x 30 HW/CT 36 WZ 2.8 BW x 4.2 x 30 HW/CT 42 WZ 3.2 BW 750 / BW 700 to

6 Circular Saw Blades Circular Saw Blades Diameter x Cutting width x Bore Chrome-vanadium circular saw blades For coarse and semi-fine cuts with continuous feed. Ideal for low & high powered machines Good cutting results for straight cuts in solid wood Partially suitable for construction wood with nails and concrete residue On coated wood or other composites, only coarse cut quality is possible Number of teeth Tooth shape Steel blade body Rake angle Suitable for 315 x 1.8 x 30 CV 56 KV 1.8 TKHS x 1.8 x 30 CV 80 NV 1.8 TKHS x 1.8 x 30 CV 56 NV 1.8 TK 350 to x 2 x 30 CV 56 KV 2 BKS 400 Plus x 2.5 x 30 CV 56 KV 2.5 BW 500 to x 2.8 x 30 CV 56 KV 2.8 BW x 2.8 x 30 CV 56 KV 2.8 BW 750 / BW 700 to x 2.2 x 30 CV 56 WZ 2.2 BKS 450 Plus / BKH 450 Plus Circular Saw Blades,»Precision Cut«Circular saw blades for hand-held circular saws Diameter x Cutting width x Bore Very wide range of uses in woodwork For very good, clean cut results for longitudinal or cross-cuts in softwood and hardwood Well suited for hard wood and plywood, untreated chipboards, coated or veneered, MDF, composite materials High power consumption so the saw must have a high performance motor Number of teeth Tooth shape Steel blade thickness Rake Angle Suitable for 160 x 1.6 x 20 / 16 HW/CT 24 WZ KSAP 18 / KSA 18 LTX * 160 x 2.2 x 20 HW/CT 24 WZ KS 54 / KSE 55 Plus / 62800* KSE 55 Vario Plus / KS 55 / KS 55 FS 167 x 2.4 x 20 HW/CT 20 WZ Ks 55 S * 167 x 2.4 x 20 HW/CT 40 WZ 1.6 Ks 55 S * 190 x 2.6 x 20 HW/CT 48 WZ 1.8 Ks 66 S / Ks 68 S * 190 x 2.2 x 30 HW/CT 48 WZ KS 66 / KS 66 Plus / KSE 68 Plus * 2 x 2.6 x 30 HW/CT 56 WZ 1.8 Ks E 1678 S-Signal * 230 x 2.6 x 30 HW/CT 56 WZ KS * Diameter x Cutting width x Bore Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for 220 x 2.4 x 30 HW/CT 36 WZ 1.6 UK 290 / UK 333 / Secanta * 220 x 2.6 x 30 HW/CT 48 DZ/HZ 1.6 UK 290 / UK 333 / Secanta * 250 x 2.8 x 30 HW/CT 34 WZ KGT 500 / KGT 5 / KGT 550 / PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi * 250 x 2.8 x 30 HW/CT 42 WZ KGT 500 / KGT 5 / KGT 550 / PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi 3 / PK * 250 x 2.4 x 30 HW/CT 48 WZ neg. KS 250 / KGS 3 / KGS 3 / KGS * 250 x 2.4 x 30 HW/CT 60 WZ neg. KS 250 / KGS 3 / KGS 3 / KGS * 250 x 2.8 x 30 HW/CT 60 WZ TS 250 / PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi 3 / PK * 254 x 2.4 x 30 HW/CT 40 WZ TS 254 / TK * 254 x 2.4 x 30 HW/CT 48 WZ neg. KS 254 Plus / KGS 254 M / * KGS 254 Plus / KGS 254 I Plus 254 x 2.4 x 30 HW/CT 60 WZ neg. KS 254 Plus / KGS 254 M / * KGS 254 Plus / KGS 254 I Plus 300 x 2.8 x 30 HW/CT 48 WZ PK 300 / PKV 300 G to x 2.8 x 30 HW/CT 72 WZ 1.8 PK 300 / PKV 300 G to x 2.4 x 30 HW/CT 48 WZ neg. KS 3 Plus / KGS 3 / KS 3 M / * KGT 3 M / KGS 3 M 3 x 2.4 x 30 HW/CT 60 WZ neg. KS 3 Plus / KGS 3 / KS 3 M / * KGT 3 M / KGS 3 M 3 x 2.4 x 30 HW/CT 84 WZ neg. KS 3 Plus / KGS 3 / KS 3 M / * KGT 3 M / KGS 3 M 3 x 2.4 x 30 HW/CT 60 WZ 1.8 1,5 KGS x 2.4 x 30 HW/CT 80 WZ KGS x 2.4 x 30 HW/CT 48 WZ neg. KGS 315 Plus / KGS * 315 x 2.4 x 30 HW/CT 84 WZ neg. KGS 315 Plus / KGS * 315 x 2.8 x 30 HW/CT 48 WZ TKHS x 2.8 x 30 HW/CT 48 WZ KGS 3 / KGT 300 / TKHS x 2.8 x 30 HW/CT 84 WZ 1.8 KGS 3 / KGT 300 / TKHS Circular saw blades»classic«for semi-stationary/stationary circular saws Very wide range of uses in woodwork For good, clean cutting results for ripping or cross cutting in softwood and hardwood Suitable for hard wood and plywood, untreated chipboards, coated or veneered, MDF, composite materials High power consumption so the saw must have a high performance motor Circular saw blades for semi-stationary/stationary circular saws 346 Diameter x Cutting width x Bore Very wide range of uses in woodwork For very good, clean cut results for longitudinal or cross-cuts in softwood and hardwood Well suited for hard wood and plywood, untreated chipboards, coated or veneered, MDF, composite materials High power consumption so the saw must have a high performance motor Secondary holder for circular saw blades with Ø 216, 250, 254 and over 300 Number of Teeth Tooth Shape Steel blade thickness Rake Angle Suitable for 2 x 2.4 x 30 HW/CT 30 WZ PK 200 / UK * 2 x 2.4 x 30 HW/CT 40 WZ KS 2 / KGS 255 / PK 200 / UK * 2 x 2.8 x 30 HW/CT 42 FZ/TZ neg. KS 2 / KGS 255 / PK 200 / UK * 2 x 2.4 x 30 HW/CT 42 WZ PK 200 / UK * 216 x 2.4 x 30 HW/CT 48 WZ neg. KS 216 M Lasercut / KGS 216 M / KGS 216 Plus / KGSV 72 Xact / KGSV 72 Xact SYM / KGSV 216 M 62800* Diameter x Cutting width x Bore Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for 216 x 2.4 x 30 HW/CT 40 WZ neg. KS 216 M Lasercut / KGS 216 M / KGSV 216 M / KGSV 72 Xact / KGSV 72 Xact SYM * 216 x 1.8 x 30 HW/CT 40 WZ KS 18 LTX 216 / KGS 18 LTX * 216 x 2.4 x 30 HW/CT 30 WZ TS 216 / TS 216 Floor * 254 x 2.4 x 30 HW/CT 48 WZ neg. KGS 254 M 62800* 3 x 2.4 x 30 HW/CT 56 WZ neg. KGS 3 M / KS 3 M / KGT 3 M * 347

7 Circular Saw Blades Circular Saw Blades Circular Saw Blades,»Multi Cut«Circular saw blades for hand-held circular saws Diameter x Cutting width x Bore Universal use for demanding materials For the highest standards in cutting quality, e.g. for laminate, thin-walled plastic, aluminium, copper and bronze materials Ideally suited for many interior work applications. Perfect cutting results, also for cross-cuts in solid wood, coarse, coated or veneered chipboards, MDF The circular saw must have a very high performance power Relatively slow saw advance Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for 150 x 2.4 x 20 HW/CT 36 WZ 1.6 Ks 52 S * 152 x 2.4 x 20 HW/CT 54 FZ/TZ neg. Ks 52 S * 160 x 2.2 x 20 HW/CT 30 WZ KS 54 / KSE 55 Plus / KSE 62800* 55 Vario Plus / KS 55 / KS 55 FS 160 x 2.2 x 20 HW/CT 42 WZ KS 54 / KSE 55 Plus / * KSE 55 Vario Plus / KS 55 / KS 55 FS 160 x 2.2 x 20 HW/CT 54 FZ/TZ KS 54 / KSE 55 Plus / * KSE 55 Vario Plus / KS 55 / KS 55 FS 167 x 2.4 x 20 HW/CT 42 FZ/TZ neg. Ks 55 S * 190 x 2.2 x 30 HW/CT 36 WZ KS 66 / KS 66 Plus / KSE 68 Plus * 190 x 2.6 x 20 HW/CT 54 FZ/TZ neg. Ks 66 S / Ks 68 S * 190 x 2.2 x 30 HW/CT 56 FZ/TZ KS 66 / KS 66 Plus / KSE 68 Plus * 230 x 2.6 x 30 HW/CT 60 WZ KS * Circular saw blades»classic«for semi-stationary/stationary circular saws Diameter x Cutting width x Bore Universal use for demanding materials For high standards in cutting quality, e.g. for laminate, thin-walled plastic, aluminium, copper and brass materials Ideally suited for many interior work applications Good cutting results, also for cross-cuts in solid wood, coarse, coated or veneered chipboards, MDF The circular saw must have a very high performance power Relatively slow saw advance Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for 216 x 2.4 x 30 HW/CT 60 FZ/TZ neg. KGSV 216 M / KGSV 72 Xact / KGSV 72 Xact SYM / KS 216 M Lasercut / KGS 216 M Reducing Rings for Circular Saw Blades * Circular saw blades for semi-stationary/stationary circular saws Diameter x Cutting width x Bore Universal use for demanding materials For the highest standards in cutting quality, e.g.for laminate, thin-walled plastic, aluminium, copper and bronze materials Ideally suited for many interior work applications. Perfect cutting results, also for cross-cuts in solid wood, coarse, coated or veneered chipboards, MDF The circular saw must have a very high performance power Relatively slow saw advance Secondary holder for circular saw blades with Ø 216, 250, 254 and over 300 (except ) Number of teeth Tooth shape Steel blade thickness Rake angle Suitable for Reducing ring Ø 20 x 1.2 x 16 For circular saw blades with a steel blade thickness of max. 1.6 Reducing ring Ø 30 x 1.2 x 16 For circular saw blades with a steel blade thickness of max. 1.6 Reducing ring Ø 30 x 1.2 x 20 For circular saw blades with a steel blade thickness of max. 1.6 Reducing ring Ø 30 x 1.2 x 25 For circular saw blades with a steel blade thickness of max. 1.6 Reducing ring Ø 30 x 1.6 x 16 For circular saw blades with a steel blade thickness of max x 2.6 x 30 HW/CT 54 FZ/TZ neg. KS 2 / KGS 255 / Ks E 1678 S-Signal * 2 x 2.8 x 30 HW/CT 60 WZ 2 5 neg. KS 2 / KGS 255 / Ks E 1678 S-Signal * 2 x 2.4 x 30 HW/CT 64 WZ 1.6 PK 200 / UK * Reducing ring Ø 30 x 1.6 x 20 For circular saw blades with a steel blade thickness of max * 2 x 2.4 x 30 HW/CT 64 FZ/TZ neg. KS 2 / KGS * 216 x 2.4 x 30 HW/CT 60 FZ/TZ neg. KS 216 M Lasercut / KGS 216 M / KGS 216 Plus / KGSV 72 Xact / KGSV 72 Xact SYM * 216 x 2.4 x 30 HW/CT 64 FZ/TZ 1.6 TS 216 / TS 216 Floor * Reducing ring Ø 30 x 1.6 x 25 For circular saw blades with a steel blade thickness of max * 220 x 2.6 x 30 HW/CT 80 FZ/TZ 1.6 UK 290 / UK 333 / Secanta * 250 x 2.8 x 30 HW/CT 80 WZ 1.8 KGT 500 / KGT 5 / KGT 550 / TS 250 / PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi * 250 x 2.8 x 30 HW/CT 80 FZ/TZ 2 5 neg. KGS 3 / KGS 3 / KGS 331 / KGT 500 / KGT 5 / KGT 550 / TS 250 / PKU 250 / PK 255 / PKF 255 / PKF 255 V8 / Multi 260 / Multi * 254 x 2.4 x 30 HW/CT 80 FZ/TZ TS 254 / TK * 254 x 2.4 x 30 HW/CT 80 FZ/TZ neg. KS 254 Plus / KGS 254 M / * KGS 254 Plus / KGS 254 I Plus 300 x 2.8 x 30 HW/CT 96 FZ/TZ neg. PK 300 / PKV 300 G to x 2.8 x 30 HW/CT 96 FZ/TZ 2 5 neg. KGS 3 / KS 3 Plus / KS 3 M / KGT 3 M / KGS 3 M 315 x 2.4 x 30 HW/CT 96 FZ/TZ neg. KGS 315 Plus / KGS * 315 x 2.8 x 30 HW/CT 96 FZ/TZ 2 5 neg. KGS

8 Accessories for Circular Saws Cordless Jigsaws Other Accessories for Circular Saws Precision guide rail with accessories Sawdust ejection nozzle Suction hose 350 Precision guide rail Guide rail made of sturdy, anodised aluminium extrusion Anti-slip backing provides safe and reliable support and protects the work piece surface against scratches Guide rule, adjustable to eliminate play suitable for: Metabo jigsaws, circular saws and router models OFE 738 and Of E 29 Signal (when using the appropriate accessories; KS 55 FS, KSE 55 Vario Plus, KS 66 Plus, KSE 68 Plus can be used directly); also suitable for the CED 5 Plus cutting guard in connection with an angle grinder Total : 1,500 cm Guide rail with bag Connector For the trouble-free joining together of two precision guide rails Set of two clamps For fixing the precision guide rail on the work piece or work table Guide plate For use with the circular saws KSA 18 LTX, KSAP 18, KS 54 and KS 54 SP on the guide rail Complete guide plate with 2 mounted aluminium threaded bushes for the circular saws Adapter For use with the KS 66 and KSE 68 Plus circular saws (old; orderno 6043) on the guide rail Sawdust ejection nozzle Can be rotated For fitting the suction hose to the circular saw KS 54 and KSE 55 Plus Suction hose With bayonet fitting and rubber connector (internal Ø 30, outside Ø 35 ) Connector Ø: 58 / 35 Hose : 3.5 m Suction hose Ø: * 63100* * Technical data Cordless Jigsaw STA 18 LTX Cordless Jigsaw STA 18 LTX 0 Type of battery pack Li-Ion / LiHD Li-Ion / LiHD Battery pack voltage 18 V 18 V Maximum thickness of material in - Wood Non-ferrous metals Steel sheet Swivel range from / to: - 45 / /+ 45 Pendulum stroke levels 4 4 Saw blade stroke Strokes no load 0-2,700 /min 1,000-3,000 /min Weight (including battery pack) 2.8 kg 2.9 kg Scope of delivery Extraction nozzle Protective glass Plastic guard plate Chip guard plate Hexagonal wrench 2 Li-Power battery packs (18 V/5.2 Ah) ASC V»AIR COOLED«charger Plastic carry case Equipment variants can be found in the Metabo price list and on the internet Product advantages Metabo Quick, for changing saw blades without tools Close proximity saw blade guidance for precise cuts Top handle with non-slip soft-grip surface Extremely powerful jig saw with VTC electronics for fast cuts into softwood of up to 0 Extremely handy due to small handle size and soft-grip surface Vario (V)-electronics for working with Precise and material-matched sawing due to customised strokes to suit the application the variable stroke rate, pendulum stroke and material. low-lying saw blade guidance with spring support Splinter-free and gentle sawing due to guard plate with chip break guard Metabo»Quick«for changing saw blades without tools and with automatic ejection Convenient start automatic: automatic stroke acceleration when starting to saw Simple bevel cuts thanks to tool-less adjustable footplate with rest points Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised strokes to suit the application material and speeds that remain almost constant, even under load Restart protection: prevents unintentional start-up after power cut System components Selectable shaving blower function ensures free view of cutting line Integrated LED work light for illumination of the cutting line Long service life thanks to optimum gear and motor design and robust die-cast aluminium gear housing. Battery packs with capacity display for checking the charge status Accessories 357 Battery packs 64 Extraction systems

9 Jigsaws Jigsaws Technical data Jigsaw STEB 65 Quick Jigsaw STEB 70 Quick Jigsaw STEB 80 Quick Rated input power 450 W 570 W 590 W Output power 230 W 335 W 350 W Maximum thickness of material in - Wood Non-ferrous metals Steel sheet Swivel range from / to: - 45 / / /+ 45 Pendulum stroke levels Strokes no load 600-3,000 /min 900-3,300 /min 900-3,300 /min Saw blade stroke Weight (without power cable) 1.9 kg 2 kg 2 kg Cable 2.5 m 2.4 m 2.4 m Scope of delivery 60 2) 60 1) 61 Extraction nozzle Protective glass Chip Guard Plate Jigsaw blade wood Jigsaw blade metal Hexagonal wrench Plastic carry case 1) also available in 0 V (North/Latin America) 2) also available in 1 V (UK) Product advantages Dust blower function for clear view of cutting line Metabo Quick for changing saw blades without tools Top handle with non-slip soft-grip surface Close proximity saw blade guidance for precise cuts Selectable shaving blower function ensures free view of cutting line Precision guide rail and guiding device available as accessory Vario (V)-electronics for working with customised strokes to suit the application material. Extraction possible by means of connecting an all-purpose vacuum cleaner Technical data Jigsaw STE 90 SCS Jigsaw STE 0 SCS Rated input power 6 W 630 W Output power 360 W 380 W Maximum thickness of material in - Wood Non-ferrous metals Steel sheet 6 8 Swivel range from / to: - 45 / /+ 45 Pendulum stroke levels 4 4 Strokes no load 1,000-3,000 /min 1,000-3,000 /min Saw blade stroke Weight (without power cable) 2.3 kg 2.3 kg Cable 2.5 m 2.5 m Scope of delivery Extraction nozzle Protective glass Chip guard plate Hexagonal wrench Plastic carry case Product advantages Metabo Quick, for changing saw blades without tools Close proximity saw blade guidance for precise cuts Metabo Straight Cut System SCS: a fin for use in the guide plate makes sawing straight ahead even easier Selectable shaving blower function ensures free view of cutting line Integrated LED work light for illumination of the cutting line Vario-Tacho-Constamatic (VTC)-Full wave electronics for working with customised strokes for the materials used that remain almost constant under load Extraction possible by means of connecting an all-purpose vacuum cleaner Precision guide rail and guiding device available as accessory System components Accessories 357 Extraction systems System components Accessories 357 Extraction systems

10 Jigsaws Jigsaws Technical data Jigsaw STE 0 Jigsaw STE 0 Plus Rated input power 750 W 750 W Output power 420 W 420 W Maximum thickness of material in - Wood Non-ferrous metals Steel sheet Swivel range from / to: - 45 / /+ 45 Pendulum stroke levels 4 4 Strokes no load 1,000-3,0 /min 1,000-3,0 /min Saw blade stroke Weight (without power cable) 2.5 kg 2.5 kg Cable 4 m 4 m Scope of delivery Extraction nozzle Protective glass Plastic guard plate Chip guard plate Hexagonal wrench Plastic carry case Product advantages Convenient automatic start: automatic soft start stroke acceleration Simple bevel cuts thanks to tool-less adjustable footplate with rest points Motion-controlled LED work light for optimum illumination of the cutting line Restart protection: prevents unintentional start-up after power cut Extremely powerful jig saw with VTC electronics for fast cuts into softwood of up to 0 Extremely handy due to small handle size and soft-grip surface Precise and material-matched sawing due to the variable stroke rate, pendulum stroke and lowlying saw blade guidance with spring support Metabo»Quick«for changing saw blades without tools and with automatic ejection Selectable shaving blower function ensures free view of cutting line Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised strokes to suit the application material and speeds that remain almost constant, even under load Long service life thanks to optimum gear and motor design and robust die-cast aluminium gear housing. Technical data Jigsaw STEB 0 Jigsaw STEB 0 Plus Rated input power 750 W 750 W Output power 420 W 420 W Maximum thickness of material in - Wood Non-ferrous metals Steel sheet Swivel range from / to: - 45 / /+ 45 Pendulum stroke levels 4 4 Strokes no load 1,000-3,0 /min 1,000-3,0 /min Saw blade stroke Weight (without power cable) 2.5 kg 2.6 kg Cable 4 m 4 m Scope of delivery 64 1) 64 2) Extraction nozzle Protective glass Plastic guard plate Chip guard plate Hexagonal wrench Plastic carry case 1) also available in 0 V (North/Latin America) 2) also available in 1 V (UK) Product advantages Convenient automatic start: automatic soft start stroke acceleration Simple bevel cuts thanks to tool-less adjustable footplate with rest points Motion-controlled LED work light for optimum illumination of the cutting line Restart protection: prevents unintentional start-up after power cut Extremely powerful jig saw with VTC electronics for fast cuts into softwood of up to 0 Precise and material-matched sawing due to the variable stroke rate, pendulum stroke and lowlying saw blade guidance with spring support Metabo»Quick«for changing saw blades without tools and with automatic ejection Selectable shaving blower function ensures free view of cutting line Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised strokes to suit the application material and speeds that remain almost constant, even under load Long service life thanks to optimum gear and motor design and robust die-cast aluminium gear housing. System components Accessories 357 Extraction systems System components Accessories 357 Extraction systems

11 Overview Jigsaw Blades WOOD (T 9 B) (T 9 B) (T 9 BO) (T 1 C) (T 4 D) (T 4 D) (T 244 D) (T 244 D) (T 344 D) (T 744 D) (T 1 AO) (T 1 B) (T 1 B) (T 1 BR) (corresponds to ) to be processed Jigsaw blades made of HSS progressively toothed for curved cuts fast, coarse universally quick universal, fast, progressively toothed for curved cuts for curved cuts, progressively toothed extra long, fast extra long, precise clean for curved cuts clean clean, progressively toothed clean, reverse, toothed soft Wood < 15 > 15 hard wood < 20 > 20 chipboard/wood core plywood s < 20 > 20 plastics < 20 > 20 building/construction timber < 60 > 60 coated boards < 30 > 30 kitchen/worktops < 30 > 30 laminates < 20 < 30 wood + metal, wood + nails < 60 METAL (T 8 G) (T 8 A) (T 8 A) (T 218 A) (T 218 A) (T 318 A) (T 8 B) (T 8 B) (T 318 B) (T 8 AF) (T 8 AF) (T 318 AF) (T 318 BF) (T 8 EOF) (T 8 BF) (T 8 BF) (T 718 BF) (T 8 EF) (T 3 X) (T 7 D) (T 227 D) (T 7 DF) (T 345 XF) (corresponds to ) Jigsaw blades made of HSS Jigsaw blades made of BiM BiM HSS BiM progressively toothed for curved cuts for curved cuts, progressively toothed long version progressively toothed long version progressively toothed for curved cuts progressively toothed extra long universally progressively toothed fast for curved cuts fast universally progressively toothed steel sheets/ non-ferrous metals < 1.5 < 3.0 > 3.0 pipes/profiles < 30 aluminium/ non-ferrous metals sandwich materials > 30 < 15 > 15 < 65 > 65 plastics < 30 > 30 always use coolant lubrication when sawing aluminium can also be used for wood 356 Accessories for Jigsaws (T 1 D) (T 1 D) (T 3 CD) (T 4 DP) (T 344 DP) (T 3 BCP) (T 3 B) (T 4 DF) (T 4 DF) (T 344 DF) (T 1 AOF) (T 1 AIF (T 1 BF) (T 1 BRF) (T 3 CDF) (T 3 CLF) (T 1 HF) (T 3 BF) (T 234 X) Jigsaw blades made of HSS Jigsaw blades made of BiM progressively toothed precise, extra thick precise, extra thick and long precise, extra thick extra clean top and bottom fast fast, progressively toothed fast, extra long for curved cuts, clean clean clean clean, reverse, toothed fast also for non-ferrous metals: extra clean top and bottom Universally progressively toothed SPECIAL APPLICATIONS (T 8 AHM) (T 8 EHM) (T 3 CHM) (T 1 HM) (T 341 HM) (T 1 A) (T 3 A) (T 3 AW) (T 0 Riff) (corresponds to ) Straight blade Wavy blade Coarse Fine Stainless steel sheets (Inox) non-ferrous metals Glass-fibre reinforced plastic/corian 4-60 Gypsum plaster/cement fibreboard Ceramics/Glass Plexiglass/Polycarbonate 2-20 Polystyrene/cardboard/leather/rubber/carpet < 50 Legend Progressively toothed = ascending suitable for both thin and thick materials reverse toothed = clean cutting edges at the top, caution: deactivate the pendulum action! highly suitable Only suitable under certain circumstances

12 Accessories for Jigsaws Accessories for Jigsaws JIGSAW BLADES Jigsaw Blades Jigsaw blades with single lug bayonet shank Features of the Metabo jigsaw blades Colour The colour indicates for which material the blade is best suited. Yellow for wood Yellow with blue lettering For wood with nails Blue For metal Black For special applications Basic blade material HCS Carbon steel, for cutting soft wood, hardboards, plastics HSS High yielding high-speed steel, suitable for metal, aluminium work BiM Bi-metal: particularly flexible mix of HCS and HSS. The saw blades have a much higher life expectancy than HCS and HSS and have proven their worth when there is risk of the shaft breaking Carbide Carbide, these particularly high performing saw blades are suitable for stainless steels, fibreglass reinforced plastic, gypsum plaster or cement fibre boards. Saw blades with a carbide coating are suitable to cut ceramic tiles Suitable for Metabo, AEG, Black & Decker, Bosch, DeWalt, Festo, Hitachi, Holz-Her, Kress, Makita, Skil... Usable for wood,»classic«series Hardwood, softwood, chipboards, wood-core plywood 2-15, fibre boards 2-15, plastics, insulating material Milled, wavy HCS T 9 B * Hardwood, softwood, chipboards, wood-core plywood 2-15, fibre boards 2-15, plastic, insulation material, saw blades with iersion tip Milled, wavy HCS / - TPI/ Progressive T9B * Hardwood, softwood, chipboards, wood-core plywood 2-20, fibre boards 2-20, plastics, insulating material, especially for curved cuts Milled, wavy HCS T 9 BO * * Quality classes»classic«series»professional«series»pionier«series»expert«series good finish results with very good tool life Fast, clean and precise angle-cutting with long service life Quick through all materials For special applications Hardwood, softwood, plastics 4-50, for fast, rough cuts Milled, offset HCS T 1 C * for wood,»professional«series Fast, clean and precise with a long tool life * Hardwood, softwood, chipboards, wood-core plywood 5-50, for quick cuts ground, offset HCS T 4 D * * * Hardwood, softwood, chipboards, wood-core plywood 5-50, for quick cuts, saw blade with plunge tip ground, offset HCS / 6-5 TPI / Progressive T 4 D * Teeth milled, offset for clearance gap A relatively rough cut, fast progress in cutting on hard and soft wood, aluminium, non-ferrous metals and plastics Teeth milled, waved for clearance gap A fine cut with straight tool guidance in hard and soft wood, aluminium, nonferrous metals and plastics Teeth ground, offset for clearance gap Fast cutting in hard and soft woods Teeth ground, offset for clearance angle and clearance gap Fine and clean cut in wood and plastics Hardwood, softwood, chipboards, wood-core plywood 5-50, especially for curved cuts ground, offset HCS T 244 D * * Hardwood, softwood, chipboards, wood-core plywood 5-50, especially for curved cuts, saw blade with plunge tip ground, offset HCS / 6-5 TPI / Progressive T 244 D * Hardwood, softwood, chipboards, wood-core plywood 2-15, fibre boards, for quick cuts ground, offset HCS T 344 D * Shank forms The jigsaw blades from Metabo are produced with all shank forms matching the jigsaws of other brand names. Single-lug bayonet shank U-shank Hardwood, softwood, chipboards, wood-core plywood, fibre boards, construction wood, extra thick ground, offset HCS T 744 D * Softwood, plywood, plastics 1.5-5, especially for clean cuts, especially for curved cuts pointed teeth w T 1 AO * *

13 Accessories for Jigsaws Accessories for Jigsaws Usable Usable Hardwood, softwood, chipboards, wood-core plywood, fibre boards, plastics 3-30, for clean cuts HCS T 1 B * * * Hardwood, softwood, chipboards, wood-core plywood, fibre boards, plastics 3-30, for clean cuts, saw blades with plunge tip HCS / 9 TPI T 1 B * Hardwood, softwood, chipboards, wood-core plywood, fibre boards, coated boards 3-30, for clean cuts, Caution: deactivate the pendulum action! Clearance angle, tooth ground reverse gear cutting HCS T 1 BR * * Hardwood, softwood, chipboards, wood-core plywood -45, fibre boards -45, for clean cuts HCS T 1 D * Hardwood, softwood, chipboards, wood-core plywood -45, fibre boards -45, for clean cuts, saw blade with plunge tip HCS / 6-5 TPI/ Progressive * * T 1 D * Hardwood, softwood, chipboards, wood-core plywood 4-60, fibre boards 4-60, for clean cuts HCS T 3 CD * Hardwood, softwood, doors, kitchen counters 5-50, for precise angle cuts, extra thick ground, offset HCS T 4 DP * Hardwood, softwood, chipboards, wood-core plywood 5-0, fibre boards 5-0, for angle-precise cuts, extra thick precision ground, tooth ground HCS T 344 DP * Kitchen counters, hardwood 3-65, softwood 3-65, doors, for precise angle cuts, extra thick HCS T 3 BCP * Perfect on both sides, splinter-free cutting result, for fast cuts, soft wood. Attention: deactivate pendulum stroke! HCS T 3 B * for wood,»professional«series, BiM Fast, clean and precise with a very long tool life Hardwood, softwood, coated boards 5-50, for quick cuts ground, offset BiM T 4 DF * Hardwood, softwood, wood with nails, laminated board 5-50, for quick cuts, saw blade with plunge tip ground, offset BiM / 6-5 TPI/ Progressive T 4 DF * Hardwood, softwood, coated boards 5-0, for quick cuts ground, offset BiM T 344 DF * Especially for laminate, laminated flooring, hardwood, softwood, coated boards, plywood, especially for curved cuts, for clean cuts, pointed teeth BiM T 1 AOF * Especially for laminate, laminated flooring, hardwood, softwood, coated boards, plastics 2-30, for clean cuts, pointed teeth BiM T 1 AIF * Hardwood, softwood, laminated flooring, coated boards, plastics 3-30, for clean cuts, saw blade with plunge tip BiM T 1 BF * Especially for laminate, laminated flooring, kitchen counters 3-30, coated boards, for clean cuts, Caution: deactivate the pendulum action! Clearance angle, tooth ground reverse gear cutting BiM T 1 BRF * Hardwood, softwood, coated boards 4-60 BiM T 3 CDF * Hardwood, softwood, chipboards, plywood 5-80, fibreglass boards 5-30, for quick cuts BiM T 3 CLF * Hardwood, softwood, wood with nails, non-ferrous metals, plastics Ground BiM T 1 HF * Perfect on both sides, splinter-free cutting result, for fast cuts, hardwood. Attention: deactivate the pendulum action! BiM T 3 BF * for wood,»pionier«series Quick and clean in all wood thicknesses Hardwood, softwood, chipboards, wood-core plywood, fibre boards, for quick cuts HCS ,0-3.0, Progressive T 234 X * Universal,»Pionier«series For wood, metal, plastics * Wood, wood with nails, metal, non-ferrous metals, plastics Offset, milled BiM ,4-5.0, Progressive T 345 XF * for metal,»classic«series * Steel sheets , non-ferrous metals Milled, wavy HSS T 8 G * * Steel sheets 1-3, non-ferrous metals Milled, wavy HSS T 8 A * * *

14 Accessories for Jigsaws Accessories for Jigsaws Usable Usable Steel sheets 1-3, non-ferrous metals Milled, wavy HSS / TPI / Progressive T 8 A * Sheet steel 1-3, non-ferrous metals, especially for curved cuts Milled, wavy HSS T 218 A * HSS / TPI T 218 A * Steel sheets 1-3, non-ferrous metals, sandwich materials Milled, wavy HSS T 318 A * * Steel sheets 2.5-6, non-ferrous metals Milled, wavy HSS T 8 B * * Steel sheets 2.5-6, non-ferrous metals Milled, wavy HSS / - TP I/ T 8 B * Progressive HSS T 318 B * for metal,»professional«series Unbreakable, with long tool life for aluminium and non-ferrous metals,»expert«series Especially for aluminium and non-ferrous metals Aluminium 3-15, non-ferrous metals 4-20, plastics, for quick cuts Milled, offset HSS T 7 D * * Aluminium 3-15, non-ferrous metals 4-20, especially for curved cuts Milled, offset HSS T 227 D * Aluminium 3-15, non-ferrous metals 4-20, plastics, for quick cuts Milled, offset BiM T 7 DF * for stainless steel,»expert«series Especially for stainless steel, Inox Stainless steel sheets (Inox) 1-2, non-ferrous metals Ground HM T 8 AHM * Stainless steel sheets (Inox) 2-4, non-ferrous metals Ground HM T 8 EHM * for plastics,»expert«series For special applications, e.g. plastics Steel sheets 1-3, non-ferrous metals Milled, wavy BiM T 8 AF * Steel sheets 1-3, non-ferrous metals Milled, wavy BiM / TPI / Progressive T 8 AF * Fibreglass reinforced plastics, Corian 4-60 Ground HM T 3 CHM * for gypsum carton/cement materials,»expert«series For special applications, e.g. gypsum carton, cement materials Steel sheets 1-3, sandwich materials 2-65, non-ferrous metals, Perspex Milled, wavy BiM T 318 AF * Steel sheets 2.5-6, non-ferrous metals Milled, wavy BiM T 8 BF * BiM / - TPI T 8 BF * Steel sheets 2.5-6, sandwich materials 2-65, non-ferrous metals, Perspex Milled, wavy BiM T 318 BF * Steel sheets 2.5-6, sandwich materials 2-0, non-ferrous metals, Perspex. Milled, offset BiM T 718 BF * Steel sheets 2-5, non-ferrous metals Milled, wavy BiM T 8 EF * Sheet steel 1.5-4, especially for curved cuts Milled, wavy BiM T 8 EOF * for metal,»pionier«series Quick and clean in all material thicknesses Steel sheets 1.5-, non-ferrous metals to 30 Milled, offset BiM , Progressive T 3 XF * * Gypsum carton, cement fibre board 5-50, fibreglass reinforced plastics 5-20 Ground HM T 1 HM * Gypsum carton, cement fibre board 5-80, fibreglass reinforced plastics 5-50 Ground HM T 341 HM * for Perspex,»expert«series For special applications, e.g. Perspex * Perspex, polycarbonate 2-20, non-ferrous metals 2- HSS T 1 A * for soft materials,»expert«series For special applications, e.g. soft materials, carton Polystyrene, cardboard, leather, rubber, carpet up to 50 Knife ground, straight HCS T 3 A * Polystyrene, cardboard, leather, rubber, carpet up to 50 Blades ground, wavy HCS 6 1 T 3 AW *

15 Accessories for Jigsaws Accessories for Jigsaws Usable Length for ceramic materials,»expert«series for special applications, e.g. ceramic materials Ceramic, glass, fibre glass reinforced plastics, cast iron Coarse HM, coated T 0 Riff * Ceramic, glass, fibre glass reinforced plastics, cast iron Fine HM, coated T 150 Riff * Jigsaw blades with universal shank Suitable for Black & Decker, Skil, Kress and others Usable for wood,»classic«series Hardwood, softwood, chipboards, wood-core plywood, fibre boards 5-50, for clean cuts Milled, offset HCS U 1 C * for wood,»professional«series Cleaner/quicker cut Jigsaw Blade Assortments with Single Lug Bayonet Shank Hardwood, softwood, chipboards, wood-core plywood, fibre boards 5-50 ground, offset HCS U 4 D * Jigsaw blade assortment 1 For wood and metal HCS saw blades/hss saw blade Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Holz-Her, Kress, Makita, Skil... Consisting of 1 saw blade each: , , For wood, metal Number of parts: 3 Jigsaw blade assortment 2 For wood, metal and plastic HCS saw blades/hss saw blade Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Holz-Her, Kress, Makita, Skil... Consisting of 1 saw blade each: , , , and For wood, metal Number of parts: * * Hardwood, softwood, plywood, coated board , especially for curved cuts pointed teeth HCS U 1 AO * Hardwood, softwood, chipboards, wood-core plywood, fibre boards -45, for clean cuts HCS U 1 B * Hardwood, softwood, chipboards, wood-core plywood, fibre boards 3-30, for clean cuts HCS U 1 D * for wood,»professional«series, BiM Fast with long tool life Jigsaw blade assortment 3 For wood, metal and plastic HCS saw blades/hss saw blades Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Holz-Her, Kress, Makita, Skil... Consisting of 2 saw blades each: , , , , suitability: Wood, metal, plastics Number of parts: Jigsaw blade assortment 4 For wood HCS saw blades Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Holz-Her, Kress, Makita, Skil... Consisting of saw blades and and 5 saw blade For wood Number of parts: * * Hardwood, softwood, chipboards, wood-core plywood, fibre boards 3-30, coated boards, for clean cuts BiM U 1 BF * for wood»pionier«series Quick and clean in all wood thicknesses Hardwood, softwood, chipboards, wood-core plywood 2-65, for quick cuts HCS ,0-3.0, Progressive U 234 X * for wood and metal,»pionier«series For wood, metal, plastics Wood, wood with nails, metal, non-ferrous metals, plastics Milled, offset BiM , Progressive U 345 XF * for metal,»classic«series Sheet steel, , Milled, wavy HSS U 8 G * Steel sheets 1-3 Milled, wavy HSS U 8 A * Steel sheets, 2.5-6, Milled, wavy HSS U 8 B *

16 Accessories for Jigsaws Accessories for Jigsaws Usable for metal,»professional«series Unbreakable, with long tool life Steel sheets 1-3 Milled, wavy BiM U 8 AF * Steel sheets, 2.5-6, Milled, wavy BiM U 8 BF * Precision guide rail Guide rail made of sturdy, anodised aluminium extrusion Anti-slip backing provides safe and reliable support and protects the work piece surface against scratches Guide rule, adjustable to eliminate play suitable for: Metabo jigsaws, circular saws and router models OFE 738 and Of E 29 Signal (when using the appropriate accessories; KS 55 FS, KSE 55 Vario Plus, KS 66 Plus, KSE 68 Plus can be used directly); also suitable for the CED 5 Plus cutting guard in connection with an angle grinder Total : 1,500 cm for metal,»pionier«series Quick and clean in all material thicknesses Steel sheets 1.5-, pipes, profiles up to 30 Milled, offset BiM , Progressive U 3 XF * for aluminium and non-ferrous metals,»expert«series Especially for aluminium and non-ferrous metals Guide rail with bag Guiding Device For using jigsaws in conjunction with the precision guide rail Suitable for machine: STE 0 Plus, STE 5, STE 5 Plus, STEB 5, STEB 5 Plus, STA 18 LTX, STEB 70/80 Quick, STE 90/0 SCS, STEB 65 Quick Aluminium, non-ferrous metals 3-15, pipes, profiles up to 30 Milled, offset HSS U 7 D * Connector For the trouble-free joining together of two precision guide rails 63100* Other Accessories for Jigsaws Set of two clamps For fixing the precision guide rail on the work piece or work table 63100* Guard plate For fitting on the base plate of the jigsaw The plastic universal guard plate for protecting all work piece surfaces Guide rail adapter can be coupled on both sides, compatible with Metabo, Mafell and Bosch Rubberised iersion aid for plunge cuts Chip guard plates can be used Suitable for machine: STE 0, STE 0 Plus, STEB 0, STEB 0 Plus, STA 18 LTX 0 Guard Plate For fitting on the base plate of the jigsaw The plastic felt guard plate prevents extremely sensitive work piece surfaces from scratches, incl. 3 replacement felts Guide rail adapter can be coupled on both sides, compatible with Metabo, Mafell and Bosch Rubberised iersion aid for plunge cuts Chip guard plates can be used Suitable for machine: STE 0, STE 0 Plus, STEB 0, STEB 0 Plus, STA 18 LTX 0 Guard plate For fitting on the base plate of the jigsaw The durable plastic laminated fabric guard plate (pertinax) for wood or wood-like work piece surfaces Guide rail adapter can be coupled on both sides, compatible with Metabo, Mafell and Bosch Rubberised iersion aid for plunge cuts Chip guard plates can be used Suitable for machine: STE 0, STE 0 Plus, STEB 0, STEB 0 Plus, STA 18 LTX 0 Guard plate For fitting on the base plate of the jigsaw The guard plate protects sensitive work piece surfaces from scratches suitable for machine: STEB 65 Quick, STEB 70 Quick, STEB 80 Quick, STE 90 SCS, STE 0 SCS, STA 18 LTX, STE 0 Plus, STE 5, STE 5 Plus, STEB 5, STEB 5 Plus Circle-cutting and Parallel Guide For cutting circles of Ø 0 to Ø 360 and for cutting parallel to an edge (maximum distance from the edge 2 ). Suitable for machine: STE 0, STE 0 Plus, STEB 0, STEB 0 Plus, STA 18 LTX 0, STEB 65 Quick Circle-cutting and Parallel Guide For cutting circles of Ø 0 to Ø 360 and for cutting parallel to an edge (maximum distance from the edge 2 ). Suitable for machine: STE 0 Plus, STE 5, STE 5 Plus, STEB 5, STEB 5 Plus, STA 18 LTX, STEB 70 Quick, STEB 80 Quick, STE 90 SCS, STE 0 SCS * * * * * * Lubricating / Cooling Stick Increase of durability with tools, for example, core drills, magnetic drills, BiM hole saws, routers or saw blades 3 Chip break guard plates Suitable for machine: STE 0 Plus, STE 5, STE 5 Plus, STEB 5, STEB 5 Plus 3 Chip break guard plates suitable for machine: STEB 65 Quick, STEB 70 Quick, STEB 80 Quick, STE 90 SCS, STE 0 SCS, STA 18 LTX, ST 50 Pendix, STE 70, STE 80 Quick, STE 0, STE 0 Plus, STEB 0, STEB 0 Plus, STA 18 LTX 0 Extraction Set Extraction set with corrugated end for safe connection to the Metabo all-purpose vacuum cleaner with suction hose Ø 27 and 35. Suitable for machine: STA 18 LTX 0 Extraction Set Extraction set with corrugated end for safe connection to the Metabo all-purpose vacuum cleaner with suction hose Ø 27 and 35 Suitable for machine: STE 0, STE 0 Plus, STEB 0, STEB 0 Plus Suction hose With bayonet fitting and rubber connector (internal Ø 30, outside Ø 35 ) Connector Ø: 58 / 35 Hose : 3.5 m Suction hose Ø: 27 Suction hose Antistatic suction hose With bayonet fitting and rubber connector (internal Ø 30, outside Ø 35 ) Connector Ø: 58 / 35 Hose : 3.5 m Suction hose Ø: * 63000* * *

17 Cordless Sabre Saws ROBUST SABRE SAWS: FOR POWERFUL SAWING. Few tools offer as much versatility as a sabre saw. In the renovation and construction trade it provides the ideal choice for rough cuts such as cutting pipes, wood and insulating boards, or the triing of aerated blocks and much more. With the SSEP 00 MVT and the smaller model SSE 10, Metabo offers two particularly robust and powerful sabre saws. Metabo Quick for changing saw blades without tools Selectable 3-level pendulum stroke for optimum sawing performance in any material Optimal handling Thanks to sturdy die-cast aluminium gear housing Metabo VibraTech (MVT) Integrated weight balance to reduce vibrations For the toughest applications thanks to powerful 1,400 Watt motor with stroke maintenance Maximum control with speed control trigger c/w locking function and thumbwheel for stroke preselection SSEP 00 MVT Technical data Cordless Sabre Saw PowerMaxx ASE Cordless Sabre Saw ASE 18 LTX Type of battery pack Li-Ion Li-Ion / LiHD Battery pack voltage.8 V 18 V Strokes no load 0-3,0 /min 0-2,700 /min Saw blade stroke 30 Weight (including battery pack) 1.2 kg 3.6 kg Scope of delivery Jigsaw blade for metal Sabre saw blade for wood and metal Hexagonal wrench 2 Li-Power battery packs (.8 V/2.0 Ah) 2 Li-Power battery packs (18 V/5.2 Ah) ASC V»AIR COOLED«charger Charger LC 40 Plastic carry case Equipment variants can be found in the Metabo price list and on the internet Product advantages Light, extremely handy saw for one or two handed operation. Especially suitable for working in difficult to reach places. Extended range of application thanks to unique quick retainer for sabre saw blades and jigsaw blades Depth guide can be adjusted without tools for the ideal utilisation of the saw blade and diverse applications such as plunge cuts Integrated LED work light for optimum illumination of the cutting line Practical capacity display for checking the charge status Slim, lightweight machine with soft-grip handle for comfortable sawing in every working position Robust aluminium die-cast gear housing, coated for optimum handling Saw blade rotatable by 180 for working comfortably overhead Depth guide can be adjusted without tools for the ideal utilisation of the saw blade and diverse applications such as plunge cuts Battery packs with capacity display for checking the charge status Vario (V)-electronics for working with customised strokes for the materials used Metabo Quick for changing saw blades without tools Wide range of uses thanks to the adapted Metabo saw blade range Sabre saws can, thanks to the universal range of sabre saw blades, be used in different materials, such as here in aerated concrete. Using the SSEP 00 MVT from Metabo, construction and renovation trade professionals progress quickly, even in the most demanding applications, thanks to the powerful 1,400 Watt. The SSE 10 is suited for all standard applications, for example for shortening pipes, for cutting wood and insulation boards and much more. System components Accessories 357, 371 Battery packs