APPENDIX I. Guidebush Selection
|
|
- Elizabeth Cole
- 5 years ago
- Views:
Transcription
1 APPENDIX I Guidebush Selection
2 50 Appendix I D4 User Guide GUIDEBUSH SELECTION Foreword The correct guidebush is the vital link between the router and your Leigh Jig. It precisely steers the router. Where possible, always use the Leigh system to ensure correct bush length and precise diameter for accurate results.
3 5 7/6"[,mm] 7/6"[,mm] Guidebush Selection Only two sizes of guidebush are used with the Leigh jig*: 7 6"[,mm] O.D. (outside diameter) and 5 8"[5,9mm] O.D. Bush barrel length➀ from base of router should be "[6-7mm]. 7 TP 7 5/8"[5,9mm] 5/8"[5,9mm] Use 7 6"[,mm] for all half-blind dovetailing and for through dovetailing with 4"[6,35mm] or 8mm shank cutters: i.e., dovetail cutter Nos. 50, 50-8, 60, 60-8, 70, 70-8, 75, 75-8, 80, 80-8, 0, 0-8, 20, 20-8, 28, 28-8, and straight cutter Nos. 40 and Use 5 8"[5,9mm] O.D. for large through dovetail cutter combinations with 2"[2,7mm] shanks: i.e., cutter Nos. 90, 60, 00, TP 76 Here are the two types of Leigh guidebush and five Leigh adapters. Use the chart on page 53 to select the adaptor and/or guidebush required for your router. *Except for sliding dovetails (see page 3). Adapter No. 705 Adapter No. 702 CANADA 706 Adapter No. 706 Adapter No. 703 Adapter No. 704
4 52 Appendix I D4 User Guide GUIDEBUSH SELECTION Leigh 7 and 76 guidebushes fit directly to some routers using the screws that come with the router. Leigh 7TP and 76TP (TP stands for Two Part) fit directly to Porter Cable and most Black & Decker routers. Leigh universal adapters fit to a wide range of plunge routers and accept both types of Leigh bush.
5 53 Note: Ideal barrel depth is /4" to 9/32" (6mm to 7mm) below the router base. Other manufacturers guidebushes may require careful cutting to length. u Guidebush mounting screws are provided with adaptor and adaptor mounting screws are provided with router. t 5/8" [5,9mm] O.D. guidebushes are used only with /2" [2,7mm] shank router bits. n MAFELL Rework the adaptor slightly. 9 SCHEER Rework the router base slightly. Check the make and model of your router in the left hand column. Where possible always order the Leigh adaptors and guidebushes (in red) which are specially designed for use on Leigh jigs. Other adaptors or guidebushes must be purchased from the manufacturer s own distributor. ROUTER ROUTER LEIGH OR ROUTER 7/6" [,mm] 5/8" [5,9mm] METHOD OF MAKER MODEL MAKER S ADAPTOR NO. OUTSIDE DIA. OUTSIDE DIA. ATTACHMENT GUIDEBUSH NO. GUIDEBUSH NO.t OFE 70 in plunge base No adaptor required 7 76 Screws incl. w/router AEG OFSE u ATLAS COPCO OFE 70 in plunge base, OFE 000 No adaptor required 7 76 Screws incl. w/router OFSE u AXMINSTER AW635R No adaptor required 7 76 Screws incl. w/router WHITE AW27R Adapter supplied w/router 7 76 Screws incl. w/router All Professional, HD 250, RP400K No adaptor required 7TP 76TP Threaded nut included BLACK & DECKER TP 76TP 2 screws req d SR00, 7AEE, KW780 series No adaptor required 7 76 Screws incl. w/router 9040, 90098, Screws included No adaptor required 90085, 9050, 90300, 90303, 90305, Screws included 600, 60, 602, 603, 604, 606, B TP 76TP Threaded nut included BOSCH 63,63EVS,63AEVS, 64, 64EVS, No adaptor required 67, 67EVS, 68EVS, 69EVS, B450, (RA00 required RA07 RA3 No screws required POF800ACE, GOF900ACE, GOF300ACE, GOF2000CE for VGS) 6, 6 EVS, 65,65 EVS, B550 GOF600, GOF700ACE u CASALS FT750, FT 000E, FT2000E u CMT E 702R 7 76 u Set of 3 bushes from Sears USA order no All non-plunge models No adaptor required (stamped steel) or (plastic). Set of 3 Screws incl. w/set CRAFTSMAN bushes from Sears Canada order no (SEARS) Plunge See Skill 823 or 835 Other plunge models u DW60 No adaptor required 7TP 76TP Threaded nut included DW63 No adaptor required 7 76 Screws incl. w/router DEWALT DW64, DW65, DW62 North America Only DW624, DW625 and DW626 Adaptor supplied w/router 7TP 76TP Threaded nut included DW62K and DW626 outside N. America u DW625 Type, 2 & 3 outside N. America u DW625 Type 4 outside N. America, DW625EK 702R 7 76 u EINHELL EOF 850 SP, 0F-G 00E No adaptor required 7 76 Screws incl. w/router OF5, OF5E, OF97, OF97E u MOF68, MOF69, MOF96, MOF96E No adaptor required 7 76 Screws incl. w/router ELU MOF3, MOF77 Type, 2 & u MOF77 Type 4, MOF77EK 702R 7 76 u 2720, 272, 3328 No adaptor required 7TP 76TP Threaded nut included 3303, 3304 E09600 or TP 76TP Threaded nut included 3337, 3338, u FEIN RT800 Adapter supplied w/router 7TP 76TP u OFE, OF2E, OF650, OF900E, OF000, OF00E 704 7TP 76TP Threaded nut included FESTOOL OF2000, OF2000E u FLEX All No adaptor required 7TP 76TP Threaded nut included FREUD FT u HITACHI TR8, TR2, FM8, M8, M2 Series u HOLZ-HER 2355, 2356 No adaptor required Screws incl. w/router u ISKRA MR808A Series No adaptor required 7 76 Screws incl. w/router JEPSON u KANGO OF808 No adaptor required 7 76 Screws incl. w/router KRESS OF690 IE Series No adaptor required 7 76 Screws incl. w/router MAFELL LO65E 702 n 7 76 u 3600,3606,3608,362, 362B, 362BR u 362C N. America,3620, 362 MAKITA 362C Europe Qk. Fit Base Contact your National Leigh distributor 360B TP 76TP Threaded nut included RP090, RP0C u RF00, RF0, RD00, RD0, RP0 No adaptor required 7TP 76TP Threaded nut included METABO OF62, OFE TP 76TP Threaded nut included MILWAUKEE All No adaptor required Screws included PERLES OF808 Series, OFE 6990 No adaptor required 7 76 Screws incl. w/router PORTER CABLE(Rockwell) All No adaptor required 7TP 76TP Threaded nut included POWER DEVIL All No adaptor required 7 76 Screws incl. w/router R30, R50, R50, R5, RE55, R6 R500, R50, R u RYOBI R600, R60, RE600, RE u R60, R65, R70, R75, RE75, R80, R u SCHEER HM9, HM4, HM4-2, HM8, HM8-E No adaptor required Screws incl. w/router SKIL 823 or TP 76TP Threaded nut included All others No adaptor required Nut 587 STANLEY All See Bosch Distributor STAYER PR50 Series No adaptor required 7 76 Screws incl. w/router TREND (FELLISATI) T5 No adaptor required T9 Adaptor supplied w/router 7 76 Screws incl. w/router WEGOMA OF850 Series No adaptor required 7 76 Screws incl. w/router
6 54 Appendix I D4 User Guide GUIDEBUSH SELECTION
Stair jig Contents. British Standard BS 585 Part 1, 1989 Wood stairs, and the Building Regulations Approved Document K 1991 are used as a guide.
Stair jig Contents 1. 12mm thick stair jig marked for closed and open stair treads 2. Sliding pegs, threaded rod and connecting bar. 3. Router sub-base with four radius bushes (in two sets) to achieve
More informationLEIGH SUPER FMT. For the Leigh Super FMT Mortise & Tenon Jig. Joining Tradition with Today. Dedicated Customer Support
LEIGH SUPER FMT For the Leigh Super FMT Mortise & Tenon Jig Dedicated Customer Support -800-663-893 Joining Tradition with Today ii INTRODUCTION Get the Most From Your Super FMT with These Great Accessories
More informationSTAIRCASE JIG P a g e 1 o f 9
Unika Color Products Ltd. Unika House New York Way New York Industrial Park Newcastle Upon Tyne NE27 0QF Helpline Tel: 0191 2597876 STAIRCASE JIG P a g e 1 o f 9 Stair jig Contents 1. 12mm thick stair
More informationROUTASKETCH USA. International Patent No.: PCT/GB01/02290 RTD AA
35732 ROUTASKETCH USA International Patent No.: PCT/GB01/02290 RTD10000009AA Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please
More informationLEIGH FMT PRO. Frame Mortise & Tenon Jig. Leigh Router Joinery Jigs. Dedicated Customer Support Joining Tradition with Today
LEIGH FMT PRO Frame Mortise & Tenon Jig Leigh Router Joinery Jigs Dedicated Customer Support -800-66-89 Joining Tradition with Today ii Frame Mortise & Tenon Jig User Guide Your New Leigh Frame Mortise
More informationInstallation Procedures:
RZ 200 Instructions Installation Procedures: Contents Axminster AW 127 R MLCS Marvel 60 Bosch RA 1166 base 1617 EVS PK TO AVOID CONFUSION DURING INSTALLATION REMOVE PAGE 1 AND ROUTER BEING INSTALLED PAGES,
More informationLEIGH FMT PRO Frame Mortise & Tenon Jig User Guide
LEIGH FMT PRO Frame Mortise & Tenon Jig User Guide Leigh Router Joinery Jigs -800-66-89 Joining Tradition with Today ii Frame Mortise & Tenon Jig User Guide Your New Leigh Frame Mortise & Tenon Jig (FMT
More information118 Chiseling Overview Bosch Accessories 11/ % Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed
Chiseling 118 Chiseling Overview Bosch Accessories 11/12 100% Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed Bosch Accessories 11/12 Chiseling Overview 119
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES Index 1 INDEX DRILLING CHISELS SCREWDRIVING SAWING DRILLS P 2 STONE DRILLS P 8 CONCRETE DRILLS P 9 STONE/CONCRETE DRILLS P 11 WOOD DRILLS P 14 CERAMIC DRILLS P 17 UNIVERSAL DRILLS
More informationCombi 650 ITEMS ENCLOSED. Specification x Solid laminate template. 1 x Length setting stop. 2 x Location bushes. 1 x Machine screw csk
COMBI 650 ITEMS ENCLOSED 1 x Solid laminate template 2 x Location bushes 1 x Length setting stop 1 x Manual 1 x Machine screw csk 1 x Washer 1 x Guarantee card 1 x Knob Specification Length = 760mm Width
More informationChiselling. Pack quantity (Pieces per pack)
29 Chiselling 30 Chiselling Special features Hawera SDS-max chisels: Quantum leap RTecSPEED SDS-max: with power spin action The exceptional chisel: The innovative power spin action of the fast, star-shaped
More informationSecure idle tools. When not in use, tools should be stored in a dry and high or locked up place, out of reach of children.
SAFETY Observe the safety regulations in the instruction manual of the Power Tool to be used or connected to this attachment. Also observe any applicable additional safety rules. Read the following safety
More informationMANU-PRT v2.1 19/9/06 10:44 am Page 30 PRT
Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please remember to return your guarantee card within 28 days of purchase. CONTENTS
More informationCombi 1001 CONTENTS. Please remember to return your guarantee card within 14 days of purchase.
COMBI 1001 Dear Customer Thank you for purchasing this Trend product. The Combi 1001 is designed to be used with most heavy duty routers. The router should be fitted with a 30mm outside diameter guide
More informationMasonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets
Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216
More informationLEIGH FMT PRO Frame Mortise & Tenon Jig
LEIGH FMT PRO Frame Mortise & Tenon Jig Leigh Router Joinery Jigs Dedicated Customer Support -800-66-89 Joining Tradition with Today ii Frame Mortise & Tenon Jig User Guide Your New Leigh Frame Mortise
More informationLEIGH FMT PRO Frame Mortise & Tenon Jig User Guide
LEIGH FMT PRO Frame Mortise & Tenon Jig User Guide Leigh Router Joinery Jigs -800-66-89 Joining Tradition with Today ii Frame Mortise & Tenon Jig User Guide Your New Leigh Frame Mortise & Tenon Jig (FMT
More informationRZ 100 Installation Instructions:
RZ 100 Installation Instructions: TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3.
More informationPro Router Table. Kit Code Kit Code Kit Code
Kit Code 717127 Kit Code 717204 Kit Code 717205 Pro Router Table Hole assembly instructions including all three table tops, fence assembly and optional UJK table insert UJK Pro Cast Iron Table Top UJK
More informationRouterack. Instruction Manual. Universal Router Stand Set
outerack Universal outer Stand Set Instruction Manual Trend Machinery & Cutting Tools Ltd. Unit 6 Odhams Trading Estate Watford WD2 5E England Sales: 01923 249911 Technical Enquiries 01923 224681 Fax:
More informationRZ 100 Installation Instructions:
RZ 100 Installation Instructions: TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3.
More informationRZ 100 Installation Instructions:
RZ 100 Installation Instructions: TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3.
More information$ incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail $ Filip De Vis Cell: Tel:
The first metal circular saw with 4 3/4 cutting depth (on guiderail) $ 999.00 incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail Ref. 608270USET $ 899.00 incl. Ø 12 5/8 /84T HM saw blade Ref. 608270US
More informationCHAPTER 10. Half-Blind Dovetail Procedures
CHAPTER 0 Half-Blind Dovetail Procedures 6 Chapter 0 D User Guide HALF-BLIND DOVETAIL PROCEDURES Chapter Foreword In these instructions for using the Leigh Dovetail Jig, we have recommended using certain
More informationFINGER JOINT TEMPLATES LEIGH DEDICATED CUSTOMER SUPPORT Using the F3, F18 and F24 Finger Joint Templates on Leigh D-Series & SuperJigs
LEIGH FINGER JOINT TEMPLATES Using the F, F and F Finger Joint Templates on Leigh D-Series & SuperJigs DEDICATED CUSTOMER SUPPORT -00-- ii Introduction F, F & F FINGER JOINT TEMPLATES USERGUIDE FOREWORD
More informationCHAPTER 8. Through Dovetail Procedures
CHAPTER Through Dovetail Procedures 52 Chapter D4 User Guide THROUGH DOVETAIL PROCEDURES Chapter Foreword In these instructions for using the Leigh Dovetail Jig, we have recommended using certain cutters
More informationKITCHEN WORKTOP JIG 600mm
KITCHEN WORKTOP JIG 600mm FOR JOINING KITCHEN WORKTOPS WITH A ROUTER INCLUDES: 3xSetting Bushes 1xInstruction Manual REQUIRES: 12.7mm (1/2 ) Collet Plunge Router 12.7mm (1/2 ) x 50mm TCT Router Cutter
More informationCode Router Elevator Fast accurate height adjustment from above the table
Code 502701 Router Elevator Fast accurate height adjustment from above the table AT&M: 06/12/2017 Index of Contents Page No. Index of Contents 02 Declaration of Conformity 02 What s included 03-04 Specifications
More informationRZ 100 Installation Instructions:
RZ 100 Installation Instructions: TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3.
More informationLEIGH D4 DOVETAIL JIG SYSTEM. Joining Tradition With Today. This jig sure makes it easy. Norm Abram, New Yankee Workshop
LEIGH D4 DOVETAIL JIG SYSTEM Joining Tradition With Today 2005 This jig sure makes it easy. Norm Abram, New Yankee Workshop The Leigh D4 Dovetail Jig The Best There Is Welcome to the world s most versatile
More informationHalf-Blind Isoloc Joint Procedures
ISOLOC - CHAPTER 6 Half-Blind Isoloc Joint Procedures 6- Always use scrap boards to practice and test for fit. Rip the boards to width to suit the chosen template. The pin boards should not be less than
More informationMast R Lift II. User Manual for Incra Mast-R-Lift II. Suggested Router Bit Speeds. Model #02120
Mast R Lift II User Manual for Incra Mast-R-Lift II Model #02120 61 Forest Plain Road Oro-Medonte, Ontario, Canada L3V 0R4 Toll Free: 1-866-272-7492 Email: jessem@jessem.com Website: www.jessem.com Thank
More informationFrame Mortise and Tenon Jig
Frame Mortise and Tenon Jig Now in its fourth year, the outstanding Leigh FMT Jig is appearing more and more in workshops around the world. After all, it is mortise & tenon joinery that holds most of the
More informationSingle Pass Half-Blind Dovetails
9 DR Pro - CHAPTER Single Pass Half-Blind Dovetails Why rout single pass dovetails on a variable spaced Leigh jig? Well, you just may need to reproduce or restore a late 9th or early 0th century drawer
More informationSlot Cutters. Slot Cutter Arbors. without arbor 822 CARBIDE TIPPED. the only ORANGE one. pag /1/99 1:22 PM Page 28
pag 28-47 4/1/99 1:22 PM Page 28 Slot Cutters without arbor 822 CARBE TPPE These three wing carbide tipped CMT Slot Cutters feature anti-kickback three wing blade design and CMT trademark orange Teflon
More informationSaws & Cutters. Spear & Jackson Resharpenable 300mm (12 ) x 15pt Brass Backed. Spear & Jackson Resharpenable 250mm (10 ) x 15pt Brass Backed
Section Tenon Saws Part No Spear & Jackson Resharpenable 00mm (12 ) x 15pt Brass Backed H105682 $67.10 $59.90 10 Spear & Jackson Resharpenable 250mm (10 ) x 15pt Brass Backed H105681 $58.70 $52.40 10 Spear
More informationINCRA. Suggested Router Bit Speeds. pg Website:
INCRA Mast R Lift II R User Manual For Rockler Tables Model #02121 61 Forest Plain Road, Oro-Medonte, Ontario, Canada L3V 0R4 Toll Free: 1-866-272-7492 Email: jessem@jessem.com Website: www.jessem.com
More informationBits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
More informationMast R Lift II. User Manual Model # for INCRA METRIC Mast-R-Lift II
Mast R Lift II User Manual Model #02123 for INCRA METRIC Mast-R-Lift II 61 Forest Plain Road, Oro-Medonte, Ontario, L3V 0R4 Canada 866-272-7492 Toll Free 705-726-8233 Local Phone 705-327-0295 Fax Email:
More information100 s of Tasks with One Tool
The ULTIMATE Guide to STARLOCK OSCILLATING TOOL ACCESSORIES 100 s of Tasks with One Tool Ask about Task Starlock accessories where you buy tools, or visit www.tasktools.com to purchase or get more information.
More informationSLOTTED SCREW THREAD FLAT or ROUND FILLISTER BINDING PAN TRUSS POINT # SIZE MIN. MAX. DIA. OVAL HEAD HEAD HEAD HEAD HEAD HEAD
Phillips SHEET METAL SCREWS WOOD SCREWS MACHINE SCREWS PHILLIPS FLAT, ROUND, OVAL FLAT, FLAT, OVAL ROUND, TRUSS, BRAZIER POINT # STOVE BINDING OVAL ROUND BINDING FILLISTER BUTTON 0 0, 1 0, 1 0, 1 0, 1
More informationAbrasive Tools/Separating Tools Separating Tools.
Saw frame Jig saw blades Circular saw blades Hole saws Power hack saw blades Saw bands Workshop files Precision files Needle files Rifflers Shaper planes Wood rasps File handles Sharpening files Whetstones
More informationMast R Lift II. User Manual Model # for INCRA METRIC Mast-R-Lift II
Mast R Lift II User Manual Model #02123 for INCRA METRIC Mast-R-Lift II 61 Forest Plain Road, Oro-Medonte, Ontario, L3V 0R4 Canada 866-272-7492 Toll Free 705-726-8233 Local Phone 705-327-0295 Fax Email:
More informationTHE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE
THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE 2018 2 CONTENTS INTRODUCTION 4 The Flexovit Merchandising Program 4 The Flexovit Brand History 5 A Corporate Perspective 5 How
More informationPDF // OSCILLATING MULTI TOOL CUT DRYWALL EBOOK
24 April, 2018 PDF // OSCILLATING MULTI TOOL CUT DRYWALL EBOOK Document Filetype: PDF 411.38 KB 0 PDF // OSCILLATING MULTI TOOL CUT DRYWALL EBOOK Shop Rockwell's selection of Universal Fit Oscillating
More informationA U C T I O N! UNRESERVED WOODWORKING CHATEAU BUILDING PRODUCTS LTD. and other consignors SPECIAL NOTES
UNRESERVED WOODWORKING A U C T I O N! Due to Closures, Surplus Equipment, etc. of CHATEAU BUILDING PRODUCTS LTD. and other consignors SALE DATE: Wednesday, March 19 th, 2008 TIME: SALE SITE: 12:00 Noon
More informationCopyright 2007 MLCS 1
Copyright 2007 MLCS 1 REFERENCE GUIDE and SPECIFICATIONS: Edge Guides: This 12 Dovetail Template comes complete with 2 Edge Guide Sets one set for Half Blind and one set for Rabbeted Half Blind Dovetails.
More informationJoe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX fax
Joe Jeter Sales Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX 75227-4019 214-388-4707 fax local 214-388-6707 800-455-3837 www.joejetersales.com The products featured in this catalog represent
More informationAs versatile as your job The Starlock range
As versatile as your job The Starlock range Try the new blades experience your Starlock moment Starlock from Bosch a range as versatile as never before 48 blades for the best results in sawing, routing,
More informationUSER GUIDE. Leigh Dovetail Jig. Joining Tradition with Today
USER GUIDE Leigh Dovetail Jig Joining Tradition with Today ii Your New Leigh Dovetail Jig Congratulations! You now own the world s most useful and versatile joinery tool. The Leigh Dovetail Jig will help
More informationMANU-COM1002 v4 15/2/11 12:53 Page 28 COMBI 1002
Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please remember to return your guarantee card within 28 days of purchase. CONTENTS
More informationEllipse/Circle Router Jig Instructions
Ellipse/Circle Router Jig Instructions The Ellipse/Circle Router Jig allows you to use your plunge router to easily cut precise ellipses and circles for picture frames, mirrors, signs and more. For safe
More informationELLIPSE JIG. Please read these instructions before use.
ELLIPSE JIG Please read these instructions before use. Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please remember to return
More informationDedicated Customer Support LEIGH RTJ Router Table Dovetail Jig User Guide
Dedicated Customer Support 1-800-663-8932 LEIGH RTJ400 16 Router Table Dovetail Jig User Guide 2 RTJ400 User Guide Introduction Your New Leigh RTJ400 Router Table Dovetail Jig for Through Dovetails, Half-lind
More informationHIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL
HIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL INSTALL LOCKS LATCHES LEVERS / PADDLES INDICATORS STRIKES Every Installation Is A Self-Portrait Of The Person Who Did It! Autograph Your Work With Excellence!
More informationCORDLESS DRILL NAIL PULLER E-BOOK
17 June, 2018 CORDLESS DRILL NAIL PULLER E-BOOK Document Filetype: PDF 180.24 KB 0 CORDLESS DRILL NAIL PULLER E-BOOK Save on nail guns and nailers at Nail Gun Depot. Buy Nail Pullers equipment at Get Tools
More informationCRT MK3. Please read these instructions before use.
CRT MK3 Please read these instructions before use. Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please remember to return your
More informationA COMPLETE RANGE OF ABRASIVE PRODUCTS FOR HARDWARE
A COMPLETE RANGE OF ABRASIVE PRODUCTS FOR HARDWARE 2019 CONTENTS INTRODUCTION INTRODUCING FLEXOVIT 4 HOW TO USE THIS CATALOGUE 6 HOW TO ORDER 6 UNDERSTANDING THE PRODUCT RANGE 7 PICTOGRAMS 10 MERCHANDISING
More informationRZ 200 Parts Diagram. To avoid confusion during installation remove this page and router being installed pages, return others to box.
Collar Page 1 To avoid confusion during installation remove this page and router being installed pages, return others to box. Caution: Before and during installation of Router Raizer make sure power switch
More informationIndustrial Contractors Supplies, Inc.
Industrial Contractors Supplies, Inc. - Dust Director Division - 15061 Route 30, N. Huntingdon, PA 15642 Phone: 412. 824. 6933 Fax: 412. 824. 4704 www.dustdirector.com 5" & 7" SURFACE DUST GUARDS MANUAL
More information86N80.10 Economy Dovetail Jig
86N80.10 Economy Dovetail Jig IMPORTANT: Before using your dovetail jig, it should be securely fastened to a workbench. For a temporary setup, attach the jig to a piece of ¾ thick plywood or MDF long and
More informationLe Max2. PennEngineering. September 26 th 2016 by Larry Zhang. 1
September 26 th 2016 by Larry Zhang PennEngineering 1 Overview 5.7-inch Super AMOLED display with 2560 1440 resolution (Quad HD /2K) 2.21-megapixel rear camera with dual pixel autofocus, 4K video capture;
More informationUsing the Router on the Lathe. Mike Leadbeater.
Using the Router on the Lathe. Mike Leadbeater. Just a little of my background Before we start, just a plug for our charity, are you interested in joining us?, please have a chat with Stuart or myself
More informationFinger Joint Template
LEIGH USER GUIDE Finger Joint Template Joining Tradition with Today ii Your New Leigh Fingerjoint Template You now own a unique finger jointing system. The Leigh F1 template and Variable Guidebush System
More informationAxminster Single Hinge Jig
Code 100714 Axminster Single Hinge Jig (Clamp not supplied) Index of Contents Page Index of Contents 2 Copyright 2 Introduction 3 What s in the Box 3 General Instructions for Working Practice/Safety 3
More informationPower Tool Know How - Power Router, Scroll, Sabre And Reciprocating Saws, Electric Hand Drills, Circluar Saws By Sears / Craftsman
Power Tool Know How - Power Router, Scroll, Sabre And Reciprocating Saws, Electric Hand Drills, Circluar Saws By Sears / Craftsman If you are looking for the book by Sears / Craftsman Power Tool Know How
More informationComplete Dovetail Jig Instructions
Complete Dovetail Jig Instructions 15 18 4 3 1 12 13 8 19 17 16 6 14 5 9 11 10 2 9 PARTS LIST - Complete Dovetail Jig Introduction Your new dovetail jig will cut Full Through Dovetails and three varieties
More informationPRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate.
PRAZI USA Model PR-3900 Owners Manual Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA 214 Rear South Meadow Rd (800)-262-0211 Plymouth MA, 02360 www.praziusa.com ChestMate
More informationBELFAST SINK RECESS WORKTOP JIG
Unika Color Products Ltd. Unika House New York Way New York Industrial Park Newcastle Upon Tyne NE27 0QF Helpline Tel: 0191 2597876 BELFAST SINK RECESS WORKTOP JIG 2 CONTENTS INCLUDE 1 Belfast Sink Recess
More informationMADE IN GERMANY NEW. SDSmax. PROConnect. SDSplus ZENTRO Rotary Hammer Drill Bit 3. PROConnect System Components
CONTENT Article MADE IN GERMANY Order no. Page 4-Cutter Chisel for Drilling and Chiseling Hammers SDSplus SDSmax 84000 16 23 Vmax Rotary Hammer Drill Bit SDSmax 800001 4 4x4 ZENTRO+ PROConnect PROConnect
More informationMT/JIG USA RTD AB
4609 MT/JIG USA RTD000007AB Items Enclosed x Bag B x x x x6 Bag A x x x x x4 x x4 x x x x x4 x x For Technical Support email: technical@trend-usa.com -- Description of parts Male adjustable lever Top plate
More informationPRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate.
PRAZI USA Model PR-3900 Owners Manual Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA 214 Rear South Meadow Rd (800)-262-0211 Plymouth MA, 02360 www.praziusa.com ChestMate
More informationLeigh Router Joinery Jigs. Dedicated Customer Support Joining Tradition with Today
Leigh Router Joinery Jigs Dedicated Customer Support -800-66-89 Joining Tradition with Today ii SUPERJIG--8-4 User Guide CONTENTS and STANDARDS Your New Leigh Dovetail Jig Congratulations! You now own
More informationEllipse/Circle Router Jig Instructions
Ellipse/Circle Router Jig Instructions Effective January 018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most
More informationItem ID Item Type Name
Item ID Item Type Name Amount / Fee Manufacturer 1 Power Drills Power Drill (corded) 3 Makita 2 Power Drill 3/8in Power Drill (corded) 3 Black & Decker 3 Power Drills Power Drill (corded) 3 DeWalt 4 Cordless
More informationNew Lineup H.O.: Makita Power Tools India Pvt. Ltd. Makita Service Centre: Chennai: Cochin: Delhi: Kolkata: Pune:
New Lineup 2018 CATALOGUE 2 Index 4- Belt Sander Blower Circular Saw Cutter 4 Demolition Hammer Die Grinder Drill/Hammer Drill 2- Finishing Sander Jig Saw Mixer Portable Cut-off 4 Power Planer Random Orbit
More informationCompact Router Table. Kit Code Kit Code
Kit Code 717126 Kit Code 719241 Original Instructions Compact Router Table Hole assembly instructions including the UJK table tops, fence assembly, table inserts and other accessories AT&M: 30/01/2018
More informationPerformance in Concrete and Stone DrilTec 1
Performance in Concrete and Stone DrilTec 1 Performance in Concrete and Stone Enhanced emphasis on ergonomics and operator convenience are put to work in the design of DRILTEC drill bits and accessories.
More informationTable of Contents for Tools and Prices:
Table of Contents for Tools and Prices: Air Compressor & NAilers....pAge 3-4 CompACtors......pAge 5 CoNCrete tools & mixers... page 5 generator & Welder.... page 5 HANd tools.......page 6 Home, lawn, &
More informationTHE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE
THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE 2015 2 CONTENTS INTRODUCTION 4 The Flexovit Merchandising Program 4 The Flexovit Brand History 5 A Corporate Perspective 5 Saint-Gobain
More informationDesign Update /29/2006
Design Update 3 -- 8/29/2006 Since our first design we ve made many minor changes to key areas of the prayer bench, especially the folding hinge geometry. The general design remains the same, though the
More informationCompact Router Ellipse/ Circle Jig Instructions
Compact Router Ellipse/ Circle Jig Instructions The Compact Router Ellipse/Circle Jig allows you to use your compact plunge router to easily cut precise ellipses and circles for picture frames, mirrors,
More informationPacific Antenna RF Probe assembly
Pacific Antenna RF Probe assembly Parts In the Kit: 1 1/2 x 3 Blue PEX tube 2 5/8 O.D. vinyl caps 2 3/32 dia x 2 brass tube sections 2 Pogo spring contacts 1 4-40 x 7/16 pan head screw 1 4-40 x 1/4 pan
More informationSaw Blades -Holesaws -Powersaw Blades -Hacksaw Blades -Jigsaw Blades -Reciprocating Blades
Saw S Saw s -Holesaws -Powersaw s -Hacksaw s -Jigsaw s -Reciprocating s Meet our Holesaw family Cobalt Bi-Metal Holesaws Metal ting (depth of cut 32mm) Made from Bi-Metal Cobalt High Speed, these holesaws
More informationT hrough-dovetail jigs under $350
S H O P - T E S T E D A N D R A T E D T hrough-dovetail jigs under $350 A THROUGH-DOVETAIL JOINT Through dovetails make a strong and beautiful joint, but who has the time to cut them by hand? We tested
More information! 1911 JIG INSTRUCTIONS 1 of 8
1911 JIG INSTRUCTIONS 1 of 8 RECOMMENDED TOOLS 1. 5/32 DRILL BIT HIGH SPEED STEEL WORKS CARBDE WORKS BETTER 2. 7/64 DRILL BIT HIGH SPEED STEEL WORKS CARBDE WORKS BETTER 3. 3MM (.118) KEY WAY CUTTER. (
More informationChambersScribers V.2. Owner s Manual. Parts List. 10b. 10c. ChambersScriber V.2 Owner s Manual, July Robert W. Chambers.
8 10 12 ChambersScribers V.2 10b 4 1 Owner s Manual 14 Parts List 11 3 2 1- ErgoGrip 2- Straight bubble vials 3- Bullseye bubble vial 4- Receiver - Female slide - Sliders (qty 2) - Thumbscrew to lock Slider
More informationMaster Stair Jig Instruction Leaflet
Master Stair Jig Instruction Leaflet Page 1 INTRODUCTION Equipment required to operate this jig: Hand Router 30mm guide bush 2 G-Clamps Standard Staircase: (all cutters required to be 95 ) 14mm diameter
More informationPro Lift Instructions
Pro Lift Instructions Effective January 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationCatalogue of Auction Items - Greenville Woodworkers Guild
Catalogue of Auction Items - Greenville Woodworkers Guild Come and join us - Auction and Sale on Saturday October 27, 2018 - All are welcome. Doors open at 8:30 a.m. Auction bidding closes at 10:30 a.m.
More informationROUTER TECHNOLOGIES LIMITED TWO YEAR WARRANTY
Page 1 METRIC EQUIVILANTS FOR INTERNATIONAL CUSTOMERS Note: The following metric drill bit or wrench sizes may be substituted for all operations other than drilling hole for #30 Dust Cover Insert. 1/8
More informationCMT Enlock Jig Owner s Manual
Thank you for purchasing the CMT Enlock Jig. This jig will simplify joinery in your shop, and on the job site. Please read the instructions thoroughly before using the Enlock Jig. Router requirements A
More informationCatalogue of Auction Items - Greenville Woodworkers Guild
Catalogue of Auction Items - Greenville Woodworkers Guild Come and join us - Auction and Sale on Saturday March 3, 2018 - All are welcome. Doors open at 8:30 a.m. Auction bidding closes at 10:30 a.m. From
More informationULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
More informationCopyright MLCS 1
Copyright 2007. MLCS 1 WORKING WITH BOX JOINTS Box joints (AKA "Finger Joints") provide a simple, yet equally effective, alternative to dovetail joinery. In particular, they serve well for applications
More informationJ-BOX. 3-O or 4-0 MUD RING J-BOX BRACKET BAR CABLE GRIPPER/ CANOPY MOUNTING STUD 8-32 BRACKET BAR SCREWS CANOPY STRAIN RELIEF POWER CORD CANOPY
KELSEY - CSS Cable Suspended Rotational and Static CSS - Cable Suspended 3-O or 4-0 MUD RING BRACKET BAR 1/4-20 STUD 8-32 BRACKET BAR SCREWS STRAIN RELIEF POWER CORD MOUNTING GRIPPER AIRCRAFT CABLE CABLE
More informationORIGINAL INSTRUCTIONS PRT
ORIGINAL INSTRUCTIONS PRT Please read these instructions before use. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Dear Customer Thank you for
More informationPerformance in Concrete and Stone DrilTec 1
Performance in Concrete and Stone DrilTec 1 Performance in Concrete and Stone Enhanced emphasis on ergonomics and operator convenience are put to work in the design of DRILTEC drill bits and accessories.
More informationBelfast Sink Recess Worktop Jig
Belfast Sink Recess Worktop Jig IFU 095.1 Contents include: 1 Belfast Sink Recess Jig 1 Sliding Datum Block 2 Black Plastic pegs Designed and made by one of Europe's leading manufacturers of carpenters
More information