AG25T/AG25TSQ 11.5 OC/10 SQ Cantilever. Assembly and Operation Guide

Size: px

Start display at page:

Download "AG25T/AG25TSQ 11.5 OC/10 SQ Cantilever. Assembly and Operation Guide"

Jeffery Lawson
5 years ago
Views:

1 AG25T/AG25TSQ 11.5 OC/10 SQ Cantilever Assembly and Operation Guide

2 Thank you for purchasing Treasure Garden s AG25T Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this assembly and operation guide. We recommend a two-person team for assembly and disassembly. Save information for future reference. CHECKLIST A Rotating Hub H - Tilt Degree Scale B - Foot Pedal I - Crank Handle C - Hardware J - Canopy Support Beam D - Main Frame K - Finial E - Adjustment Knob L - Canopy - Single or Double Wind Vent F - Open/Close Mechanism M- Spring Loaded Rib End Cap G - Tilt Mechanism N - Light Adapter (light sold separately) K J L M E F G 0 N D Close Open Right Left H Open I 6mm Hexagon Wrench C B A 1

3 NOTE: REFER TO SEPARATE BASE-13, BASE-AKZ OR MOUNT KIT MANUAL FOR BASE/MOUNT ASSEMBLY PRIOR TO PROCEEDING. S T E P 1 Umbrella Assembly Two-persons recommended for team lift and to complete assembly. With base cover in place or mount kit installed, lift umbrella up and insert the main frame onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2). REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS. Your umbrella is now ready to operate! (Fig. 1) (Fig. 2) 2

4 S T E P 2 Opening Canopy In the closed position, turn adjustment knob counter clockwise the adjustment knob upward (Fig. 4). Turn adjustment knob clockwise and secure in place. (Fig. 3) and slide to tighten (Fig. 3) (Fig. 4) Insert crank handle into Open/Close socket in crank mechanism (Fig. 5). Turn crank handle clockwise until the canopy is fully open (Fig. 6). CAUTION: Stop turning the crank handle as soon as the umbrella canopy is completely open and the sleeve on the umbrella center pole has reached its maximum height. 0 Cl Open Right Left Open (Fig. 5) 3 (Fig. 6)

5 S T E P 3 Tilting Canopy Tilting Front to Back Turn adjustment knob counter clockwise (Fig. 7) and slide car up and downward until desired height and angle is reached (Fig. 8). Tighten the adjustment knob clockwise to lock its position. Note: Do not use tilt function during winds. (Fig. 7) (Fig. 8) Tilting Left to Right Insert crank handle into Right/Left socket in crank mechanism (Fig. 9). To tilt canopy right, turn crank handle counter clockwise. To tilt canopy left, turn crank handle clockwise. 0 Close Open Right Left Open (Fig. 9) 4

6 S T E P Rotating Hub Swivel Place your foot on the foot pedal of the rotating hub and step-on the pedal to release rotating lock (Fig. 10). Place hands on the main frame and rotate the umbrella frame in either direction, in 90 increments. To lock position, step off the foot pedal to engage rotating lock. Main Frame 360 Foot Pedal (Fig. 10) Rotating Hub S T E P 5 Closing Canopy Insert crank handle into Open/Close socket in crank mechanism (Fig. 11). Turn crank handle counter clockwise until the canopy is closed (Fig. 12). Turn adjustment knob counter clockwise and slide downward until umbrella is in closed position. Tie string around canopy to secure canopy. Cover umbrella with provided protective cover when not in use (Fig. 13). 0 Cl Open Right Left Open (Fig. 11) (Fig. 12) (Fig. 13) 5

7 Features To ATTACH Umbrella Light: Loosen the light adapter built into the lower hub by turning counter-clockwise (Fig. 14). After loosening, pull down light adapter post (Fig. 15) to attach the umbrella light (Fig. 16 and 17) (sold separately). To REMOVE Umbrella Light and CLOSE adapter: Remove umbrella light, and gently push up the light adapter post back into umbrella runner and tighten turning clockwise (Fig. 14). (Fig. 14) (Fig. 15) (Fig. 16) (Fig. 17) S A F E T Y P R E C A U T I O N S : Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. Properly store umbrella when not in use. Close umbrella, tie string around canopy and cover umbrella with provided protective cover. Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage. C A R E A N D M A I N T E N A N C E : When not in use, close and cover umbrella with a protective cover. If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge. Allow a wet canopy to dry slightly opened, but do not leave unattended. Wipe sliding marks on the aluminum poles with a damp cloth. Winter Storage: Store in a dry place. After the Winter: Check the condition and function of the umbrella. Any defects must be repaired by a professional. 6

8 WARRANTY: Treasure Garden warrants this product (in residential use) to be free from defects in original materials and workmanship for a period of 1 year from the date of purchase. If a defect in the original material or workmanship appears during the warranty period; Treasure Garden will (at its option) repair or replace the product without charge. Simply contact your original authorized Treasure Garden dealer with a description of the defect. The dealer will verify the defect and work closely with Treasure Garden to obtain the necessary service. In many cases, simple problems can be solved with a replacement part that can be shipped directly to the dealer for professional installation / repair. In the event that warranted factory service is required, Treasure Garden will assume the responsibility of the return freight charges on warranted product for the first year only. Returned product that (upon receipt and inspection) is deemed to be not covered under our warranty, will be shipped / billed at your expense. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. RUST: Rust is a natural part of the aging process of steel or iron based materials, and is therefore NOT considered a defect. NOTE: Failure caused by unreasonable or abusive use, or failure caused by neglect of reasonable and necessary care are not covered by this warranty. Additionally, acts of nature (including but not limited to wind, hurricanes, tornadoes, and storms) are not covered by this warranty Treasure Garden, Inc. - All Rights Reserved. 8/18

AKZ13 13 OC Cantilever. Assembly and Operation Guide

AKZ13 13 OC Cantilever. Assembly and Operation Guide AKZ13 13 OC Cantilever Assembly and Operation Guide Thank you for your purchase of Treasure Garden s AKZ13 Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist.