I ndex. Interior Doors. Stair Parts MOULDINGS INTERIOR DOORS STAIR PARTS

Transcription

1

2

3 I ndex Mouldings Arch Top Casing Azek Bar Rail & Corners Baseboard Base Blocks...43, Base Corner Blocks Butcher Blocks or Plank Tops Cabinet Doors Casing Chair Rail Corner Guards Crown Blocks Crown Cypress Door Stop Door Jambs Dowel Rod Drawer Fronts Floor Mouldings Flooring Accessories Franklin Wood Glue Hardwood Flooring Hardwood Flooring Expansion Janka Hardness Table Mantles & Brackets MDF Mouldings Misc. Mouldings Mullions Nails/Brads Picture Frame Pine Mouldings Plinth Blocks Plywood Pre-Finishing Red Cedar: Clear Western Knotty Inland Redwood Register Grills Rope Moulding S4S Hardwood Lumber S2S Kiln Dried Lumber Shipping Information... 3 Special Order... 5 Switch Plate Covers Veneer Wainscote Warranty... 2, 5, 8-9 Window Stools Work Bench Tops Wide Plank Flooring Interior Doors Ash: Solid Blinds Cafe Doors Cherry: Solid Veneer Combination Doors Custom Doors , 67 Door Assembly/Construction Door Frame Assembly Door Handing Charts Door Hardware Door Specifications Hickory: Solid Etched Glass Doors Finished Opening Requirements Flush: Birch Oak Interior Replacement Doors Maple: Solid Veneer Molded: Hollow Solid Pine Poplar: Solid Veneer Pre-Finishing Options Pre-Hung Options Red Oak: Solid Veneer Schlage Locksets Shipping Information... 3 Shutters Sliding Pocket Hardware Special Order , 67 Storm & Screen Doors Walnut: Solid Warranty... 2, 56 White Oak: Solid Stair Parts Bending Mold Metal Stair Parts Shipping Information... 3 Carolina Series Over The Post: Shoe Rails Colonial Series Applications of a System Special Order Contemporary Stair Parts Climbing Volutes Specifications Fillet Connect-A-Kit Fittings Starting Steps Fluted Series Rail Fittings Treads, Risers & Rosettes Hampton Series Starting Fittings Twisted Series Handrails Upeasings, Caps, Quarterturns Wall Rails Handrail Brackets PermaCast Columns Warranty... 2, 92 Installation Hardware Pre-Finishing Options Wood Round Columns Installation Tools Primed Balusters JUL FAX info@bairdbrothers.com 1

4 POLICIES GENERAL WARRANTY 1. All items are stocked in Select Hardwoods. Natural color variation and mineral stains may occur. 2. Defects in material or workmanship must be reported upon receipt and prior to installation! Wood products must be maintained under stable temperature and humidity conditions to remain under warranty. Prompt and proper sealing and finishing is essential to maintain wood stability. 3. Replacement requests are subject to Baird Brothers Sawmill, Inc. inspection and approval. 4. Our liability shall not exceed the replacement cost of our product. LIMITED WARRANTY Baird Brothers Sawmill, Inc. products are warranted to be free from defects in material and workmanship for a limited period of 30 days from the date of shipment. If products are found to be defective by manufacturer, they will be exchanged or credited to the customer s account at his/her option. No merchandise shall be returned without approval of Baird Brothers Sawmill, Inc. Manufacturer shall not be responsible for the improper use or misuse of its products and no other warranties or responsibilities for safety or performance are either expressed or implied. A complete limited 30-day warranty statement is available to consumers in compliance with the Magnuson-Moss Warranty Act of NOTE: ALL OF BAIRD BROTHERS SAWMILL, INC. PRODUCTS INCLUDING, FLOORING, DOORS, AND ARE FOR INTERIOR USE AND INSTALLATION ONLY. RETURN POLICY 1. Shipping charges are NOT refundable. The customer is responsible for shipping costs when receiving and returning the item(s). When returning items for credit, we recommend using a service such as FedEx or UPS so that the package(s) are traceable. 2. Prefinished products, special order items, custom products, and pre-hung door units are NOT returnable. 3. Return of products must be accompanied with a proof of purchase. No damaged, soiled, stained/finished, cut, or otherwise altered items will be accepted. 4. All returns are subject to a restocking/handling charge of 15%. Goods are NOT returnable after 60 days from the date of receiving material. TERMS OF SALE 1. Orders not on account must be paid in full when placed. 2. Special Orders require payment in full and are non-returnable. Please allow 2-3 weeks for completion of special orders.(special patterns may be over-run 10%) Additional shipping charges could apply on special orders. 3. Orders with 10 or more pieces the same length of a product are subject to an additional 15% for that item. 4. No Baird Brothers truck C.O.D. deliveries. 5. Do Not expose finish-grade wood products to rain/snow while loading or unloading. Water spots will show up after job-site finishing. 6. Do Not subject material to extremely high, low, or fluctuating humidity. Relative humidity of 20-60% is ideal. 7. Wet concrete, plaster, and drywall can transmit moisture to unfinished wood products. These can all cause swelling, joint separation, twisting, cupping, or warping of wood products. 8. Do Not expose unfinished wood products to excessive heat, dryness, or sudden temperature changes (such as firing up the furnace). These can all cause twisting, cupping, or warping as well. 9. Non-standard items are not subject to return or cancellation if purchasing and/or production have been initialized. 2 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

5 SHIPPING GROUND SHIPPING (small orders 8' and shorter in length) - FedEx Home Delivery, FedEx Ground (business addresses), FedEx Express Saver, UPS Ground, and UPS 3 Day Select orders normally ship in 1 to 2 business day. FedEx Overnight, FedEx 2 Day, UPS Next Day Air, and UPS 2nd Day Air orders will ship the same day if placed before 2:00 p.m. EST. - Shipping and handling charges are not refundable. All returns must be in resalable condition. BAIRD BROTHERS DELIVERY TRUCK (large orders or material over 8' in length within a 100 mile radius) - Our driver will not carry material into the house. - Material will be delivered to the garage only, and our driver must have safe and clear access to back box truck to the garage for unloading. - We recommend but do not require anyone to be at the job site to accept material, as long as the garage is unlocked and accessible. If the garage is locked, please give us the location of a key and/or lockbox combination so your material is not left outside or returned. - If the driveway was recently poured then we require someone to be there to carry the material from the street. - All material to be returned should be placed in the garage and labeled Baird Brothers return. We will not carry return materials out of the house. - NO C.O.D. deliveries COMMON CARRIER FREIGHT TRUCK (large orders or materials over 8' in length outside of our 100 mile radius) The following should be considered when receiving a Freight Delivery: - Truck drivers are subject to a number of regulations, one of which is that they are not required to give assistance unloading. Please be prepared for this curbside delivery, as you are responsible for unloading the item(s) and placing them in your shop or home. - Some terminals have other delivery services available, such as lift gate service, for an additional cost. These services vary from terminal to terminal, so remember to ask the trucking company when they call to make delivery arrangements. You are responsible for these additional costs. - SHIPPING DAMAGE: We have great service from the trucking companies we deal with, however, sometimes shipping damage can occur. It is extremely important to inspect and note any damage that might be suspect on the Bill of Lading (BOL) when signing for the shipment. Damage to the packaging container or material if it has become exposed should be noted on the form the driver gives you to sign accepting delivery. These notations will allow us to make a claim for shipping damage on your behalf. Failure to do so makes it extremely difficult to make a claim. If there is shipping damage and you have noted it on the delivery form, call us at , and we will help you get the problem resolved. - PRE-HUNG DOUBLE DOORS THAT ARE SHIPPED BY FREIGHT TRUCK ARE KNOCKED-DOWN PRIVACY POLICY Baird Brothers Sawmill, Inc. is committed to protecting your privacy and will not use unethical promotional methods. Customer data that is collected is used to contact the customer to resolve disputes, answer questions, subcrbire to our newsletter, or provide additional information that the customer originally requested from the company. Baird Brothers Sawmill, Inc. does not sell, or rent, its customer information to third parties. JUL FAX info@bairdbrothers.com 3

6 P M F RE-FINiSHED OULDINGS, LOORING, D S P OORS, & TAIR ARTS CLEAR COAT - UV FINISH Hard Finish and Chemical Resistant For a NATURAL FINISH or choose from seven different stain colors. 1. GOLDEN 2. LIGHT CHERRY 3. EARLY AMERICAN 4. TRADITIONAL CHERRY 5. NUTMEG 6. DANISH 7. MAHOGANY 25 YEAR FLOORING FINISH 2 WEEK LEAD TIME FOR PREFINISHED ORDERS NUMBER OF COATS APPLIED: 2 Heavy Coats on Flooring 2 Coats on Moulding 2 Coats on Doors 2 Coats on Stair Parts BAIRD BROTHERS STAIN PRICES GALLON...$25.00 QUART TOUCH-UP KIT (Contains 1-Wax Stick and 1-Stain Marker in Plastic Container) WAX PUTTY STICK STAIN TOUCH-UP MARKER Baird Brothers flooring finish is a urethane based, roll-coated finish that has aluminum oxide and other scratch resistant additives, and is UV cured. Priming Pricing: Door Slab (Panel or Glass)... $ Louver Doors Cabinet Doors Mouldings up to 3-1/2"....20/ft. Mouldings 3-9/16" to 5-7/16"....25/ft. Mouldings over 5-1/2" to 8"....30/ft. Mouldings over 8-1/16", up to 11-1/2"...40/ft. Balusters Newel Posts Plinth Block PRIMING Information on Primer Used: Solvent Based Water or Oil-Based Finish Coat is Okay 6 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

7 P RE-FINiSHED P RICE L IST,, & FLOORING STAIN & CLEAR CLEAR COAT FINISH & S4S UP TO 3-1/2".50 PER FT..40 PER FT. & S4S 3-9/16" TO 5-7/16".60 PER FT..50 PER FT. & S4S 5-1/2" TO 8".70 PER FT..60 PER FT. & S4S 8-1/16" TO 11-1/2".90 PER FT..75 PER FT. HANDRAIL, BAR TOP RAIL, & DOWEL ROD 1.50 PER FT PER FT. STAIR TREADS (WITH RETURN, ADD $5.00 PER RETURN) 2.25 PER FT PER FT. STARTING TREAD KIT (TREAD, RISER, SHOE, & COVE) EA EA. BALUSTERS 4.50 EA EA. OCTAGONAL, TWISTED, & FLUTED BALUSTERS 6.25 EA EA. NEWEL POSTS 7.50 EA EA. OCTAGONAL, TWISTED, & FLUTED NEWEL POSTS EA EA. BOX NEWEL EA EA. FLUTED & RAISED PANEL BOX NEWEL EA EA. FLOORING (END MATCHED) 1.75 PER SQ. FT PER SQ. FT. FLOORING (8' FINGER-JOINTED) 1.50 PER SQ. FT PER SQ. FT. DOORS 25 YEAR FLOORING FINISH RAISED PANEL - SLAB EA EA. RAISED PANEL - SINGLE PRE-HUNG EA EA. RAISED PANEL - DOUBLE PRE-HUNG EA EA. RAISED PANEL - BIFOLD (2' TO 3') EA EA. RAISED PANEL - BIFOLD (4' TO 6') EA EA. LOUVER - SLAB EA EA. LOUVER - SINGLE PRE-HUNG EA EA. LOUVER - DOUBLE PRE-HUNG EA EA. LOUVER - BIFOLD (2' TO 3') EA EA. LOUVER - BIFOLD (4' TO 6') EA EA. FLUSH - SLAB EA EA. FLUSH - SINGLE PRE-HUNG EA EA. FLUSH - DOUBLE PRE-HUNG EA EA. FLUSH - BIFOLD (2' TO 3') EA EA. FLUSH - BIFOLD (4' TO 6') EA EA. GLASS - SLAB EA EA. GLASS - SINGLE PRE-HUNG EA EA. GLASS - DOUBLE PRE-HUNG EA EA. MISC. ITEMS PLYWOOD PER SIDE PER SIDE PLINTH & BASE BLOCKS, ROSETTES, & NEWEL DROPS 2.25 EA EA. CROWN BLOCKS, MANTLE BRACKETS, & CORNER GUARDS EA EA. REGISTER GRILLS EA EA. SWITCH PLATE COVERS 2.25 EA EA. CABINET DOORS EA EA. DRAWER FRONTS EA EA. CIRCLE TOP CASINGS EA EA. MANTLES EA EA. 7' TALL DOORS: ADD $20.00 TO 6/8 PRICE 8' TALL DOORS: DOUBLE THE 6/8 PRICE SQUARE STICKING/FLAT PANEL DOORS: ADD $25.00 TO RAISED PANEL PRICE Choose from seven stain colors or clear coat finish. *Satin finish available upon request, 25% upcharge. Prices Are Subject To Change Without Notice JUL FAX info@bairdbrothers.com 7

8 RESIDENTIAL PREFINISHED PRODUCT LIMITED WARRANTY A. WARRANTY AGAINST MANUFACTURING/GRADE DEFECTS We warrant to the original purchaser of our Prefinished Hardwood Floors purchased after September 1, 2006 against any defects caused during manufacturing. This warranty includes manufacturing defects caused during milling, grading, staining and finish coating. Our flooring is manufactured in accordance with accepted industry standards, which permit a grade/manufacturing defect tolerance not to exceed 5%. It is the responsibility of the installer/homeowner to inspect each plank prior to installation to identify manufacturing or grade defects. Once a board has been installed, it is deemed to have been accepted, and all claims based on manufacturing or grade defects are waived. Should an individual board be in question as to grade, manufacture or finish, and if the installer is not able to relocate it unseen or cut off the defective portion, the installer should not use that board. If he/she does, our liability is limited to replacement of defective material only in excess of 5% (excluding the cutting allowance). Natural wood characteristics, such as knots, cracks, color variation, etc. are considered normal grade characteristics and are not considered defects. Minor variations in plank thickness do occur and are normal between planks, and are not considered defects. We do not warrant against minor differences between color samples and the color of installed floors. B. WARRANTY AGAINST FINISH WEAR-THROUGH We warrant to the original purchaser of our Prefinished Hardwood Floors that the surface finish UV coated urethane will not wear through for a full 25 years from the date of purchase, when used under normal residential traffic conditions and use, and as long as you follow all the preventative and regular maintenance instructions provided with your product. This warranty does not cover indentations, scratches and naturally occurring wood fiber discoloration. This warranty does not cover damages caused by spills, accidents, negligence, misuse, abuse, water, sand or other extreme environmental conditions. Gloss reduction or loss of sheen are not considered wear through and are not covered under the prefinished product warranty. Discoloration due to exposure to sunlight or other environmental conditions is not considered wear through, and is not covered by our warranty. This warranty does not cover any damage that results from the accidental or intentional penetration of the finish. Nor does the warranty cover damage caused by shoes in need of repair, sports equipment, furniture, cleaning equipment, sudden impact by hard objects, pet claws, use of abrasive cleaners, or abrasion by any object such as sand or pebbles. Scratches that appear after installation are considered to be normal wear. Sanding or screening the finish will void this warranty. This warranty does not cover damage caused by moisture penetration, flooding, leaky plumbing, overflowed tubs or sinks, washing machines, dishwashers, or any similar damage. Caring for your Prefinished Hardwood Floor. Abrasive products, natural or manmade, will damage your floor. Dry mop your floor regularly to remove loose dirt or before it can scratch your floor. Wipe up spills as quickly as possible. Never wet mop your hardwood floor. Use non-abrasive cleaners that do not contain oils, waxes or phosphates. Your hardwood dealer or installer can suggest products available in your local area. Protective pads should be used between the bottom of furniture and the floor. Entry mats at doorways should be used to catch dirt before being tracked on the floor. Radiant Heat Systems. Installation over radiant heat will void this warranty. C. GENERAL INFORMATION The limited warranties described above apply only to our Prefinished Hardwood Floor products and are given to the original residential purchaser only. These warranties do not extend to commercial purchasers or commercial uses. These warranties are not transferable. TRANSPORTATION AND STORAGE: The product must be transported and stored in a dry environment. No exposure to moisture of any type should be permitted. Do not store on concrete surfaces. INSTALLATION: This warranty is void if a sub-floor other than 5/8" thick or greater performance rated plywood, or 3/4" thick or greater performance rated OSB is used. NOFMA approved staples or nails must be used and placed not more than 5" on center. Prior to installation, the owner/installer must determine that the job site and all sub-surfaces meet all requirements specified in the installation instructions. Your installer should follow the installation guidelines set forth by N.O.F.M.A. and the N.W.F.A. These are industry standards and are available by calling These standards include, but are not limited to: moisture content must be tested on both the product and subfloor prior to installation. The use of touch-up pen or filler stick for correction during installation should be accepted as normal procedure. When our Prefinished Hardwood 8 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

9 Floor is ordered, not less than 5% must be added to the actual square footage needed as allowance for cutting waste. We disclaim all responsibility for judgment errors and/or for poor installation quality of its product. We will not pay any installation or labor costs. INFESTATION: This warranty does not cover damage due to insect infestation after the product has left the factory. D. CLAIM PROCEDURE To file a claim, the original residential purchaser should first contact Baird Brothers Sawmill, Inc. ( Manufacturer ). Claims must be filed within the warranty coverage period, and your purchase receipt, verifying date of purchase, and purchase price will be required. We reserve the right to have our designated representative inspect the floors and remove samples for technical analysis. EXCLUSIVE REMEDIES: If any portion of our Prefinished Hardwood Floors should fail with respect to the warranty of manufacturing/grade defect we will replace the defective boards at our sole cost and expense. If any portion of our Prefinished Hardwood Floors should fail with respect to the warranty of wear-through, we will, at our sole option, within a reasonable time of receipt of actual notice and verification of your claim, repair, replace or refinish that only portion of the floor which has failed to perform consistently within the terms of this limited warranty, with the same product or another product of equal value, or will refund the purchase price of the affected portion of prefinished product. THIS IS THE SOLE AND EXCLUSIVE REMEDY TO THE PURCHASER AND SOLE OBLIGATION AND LIABILITY OF THE MANUFACTURER. MANUFACTURER HEREBY EXCLUDES AND WILL NOT PAY ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. MANUFACTURER ASSUMES NO LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION MAY NOT APPLY TO YOU. E. WARRANTY DISCLAIMERS AND EXCLUSIONS PREFINISHED PRODUCT WARRANTIES EXCLUSIONS: OUR LIMITED WARRANTIES DO NOT COVER WEAR THROUGH RESULTING FROM FAILURE TO FOLLOW ALL MANUFACTURER S SPECIFIC WRITTEN INSPECTION, INSTALLATION, OR MAINTENANCE INSTRUCTIONS, IMPROPER MAINTENANCE, INSUFFICIENT PROTECTION, MISUSE OR IMPROPER ALTERATIONS OF THE ORIGINAL MANUFACTURED PRODUCT, INDENTATIONS, SCRATCHES OR DAMAGE, INCLUDING, BUT NOT LIMITED TO, STAINS CAUSED BY MISUSE, ABNORMAL USE, NEGLIGENCE, VACUUM CLEANERS AND OTHER MECHANICAL CLEANING EQUIPMENT, NEGLIGENCE, FIRE, WATER, LIGHT EXPOSURE, MOISTURE, EXCESSIVE HEAT OR EXCESSIVE DRYNESS, SHAKE DUE TO ALTERATION OF PRODUCT OR DUE TO HUMIDITY, EROSION, PEBBLES, SAND, DIRT OR OTHER ABRASIVES, PETS, INSECTS, SPIKED HEEL SHOES, WEATHER CONDITIONS OR NATURAL DISASTERS. COLOR VARIATIONS, NATURALLY OCCURRING WOOD CHARACTERISTICS, WATER AND/OR MOISTURE, INCLUDING, BUT NOT LIMITED TO DAMAGE RESULTING FROM BROKEN OR LEAKY PIPES, WET MOPPING, OR WEATHER CONDITIONS OR NATURAL DISASTERS OR INSUFFICIENT PROTECTION. OUR WARRANTIES DO NOT COVER NATURAL EXPANSION AND CONTRACTION RESULTING IN SEPARATION BETWEEN BOARDS, OR DAMAGE CAUSED BY HUMIDITY OR SUNLIGHT. THE MANUFACTURER EXCLUDES ALL WARRANTIES IMPLIED BY LAW OR IMPLIED BY FACT WHICH ARE NOT EXPRESSLY SET FORTH ON THE FACE OF THIS DOCUMENT. IF ANY IMPLIED WARRANTY ARISES UNDER STATE LAW, ANY SUCH IMPLIED WARRANTY IS LIMITED IN DURATION FOR THE PERIOD OF THIS WRITTEN WARRANTY, TO THE EXTENT ALLOWED BY LAW. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE MANUFACTURER EXCLUDES AND WILL NOT PAY ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO THE EXTENT PROVIDED BY LAW. WE ASSUME NO LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. HOWEVER, SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. THIS WRITING IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE EXPRESS WARRANTIES PROVIDED HEREIN AND IS IN LIEU OF ALL OTHER EXPRESS AND/OR STATUTORY WARRANTIES BY THE MANUFACTURER. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE EXCEPT THE EXPRESS WARRANTIES ON THE FACE OF THIS DOCUMENT. JUL FAX info@bairdbrothers.com 9

10 WARRANTY - ALL OF BAIRD BROTHERS SAWMILL, INC. ARE FOR INTERIOR USE AND INSTALLATION ONLY. - Baird Brothers Sawmill, Inc. products are warranted to be free from defects in material and workmanship for a limited period of 30 days from the date of shipment. If products are found to be defective by manufacturer, they will be exchanged or credited to the customer's account at his option. No merchandise shall be returned without approval of Baird Brothers Sawmill, Inc. SPECIAL ORDER ITEMS Cherry and some Maple handrail fittings are non-stock. Hickory, Ash, and Walnut handrail fittings are available special order. Maple and Cherry stair treads, handrails, balusters, and newels may be in stock, depending on design. Please call for availability. Non-stock items require two to four weeks lead-time. Hickory, Ash, and Walnut handrail, balusters, and newels are available made to order. Custom turnings are available from Baird Brothers, pricing and lead times are quoted per job. NOTE: All special orders will require payment in full and are non-returnable. All prices are subject to change without notice. Additional shipping charges could apply on special orders. All stair parts listed as "oak" are red oak. White oak stair parts are available special order. POLICIES AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE 92 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

11 New Technology Mingled with Old World Techniques Decorative Scrolls METAL BALUSTERS, NEWEL POSTS & Accessories Call for a Separate Catalog IRON BALUSTER LINE Custom iron balusters are manufactured for beauty and detail. Basket Newel Post Double Basket & Single Basket Each component is given individual attention to ensure quality throughout all products. Double Ball & Single Ball The entire line of iron, including our top and bottom shoes, comes pre-finished with a powder coating. This durable tough coating provides a finish coat that may be used for interior or exterior use. Double Feather & Single Feather Double Knuckle & Single Knuckle JUL FAX info@bairdbrothers.com 93

12 HANDRAILS ITEM PROFILE DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY LJ-6010 SERIES LJ-6010 Traditional Handrail LJ-6010P Traditional Handrail Plowed 1-1/4" LJ-6010B Traditional Bending Rail (7 pcs) LJ-6210 SERIES LJ-6210 Traditional Handrail LJ-6210P Traditional Handrail Plowed 1-3/4" LJ-6210B Traditional Bending Rail (9 pcs) LJ-6519 SERIES LJ-6519 Hampton Handrail LJ-6519P Hampton Handrail Plowed 1-3/4" LJ-6519B Hampton Handrail (9 pcs) LJ-6400 SERIES LJ-6400 Victorian Handrail LJ-6400P Victorian Handrail Plowed 1-3/4" Prices Are Subject To Change Without Notice ASH, HICKORY, WALNUT, BIRCH, QUARTERSAWN RED OAK, WHITE OAK, QUARTERSAWN WHITE OAK, MAHOGANY, SPANISH CEDAR, ALDER, BRAZILIAN CHERRY, AND PINE AVAILABLE BY SPECIAL ORDER SPECIFIED LENGTHS: ADD 15% NON-STOCK, SPECIAL ORDER APPROX. 2 WEEKS LEAD TIME BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

13 HANDRAILS (CONT.) ITEM PROFILE DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY LJ-6601 SERIES LJ-6601 Challis Handrail LJ-6601P Challis Handrail Plowed 1-1/4" LJ-6701 SERIES LJ-6701 Challis Handrail LJ-6701P Challis Handrail Plowed 1-1/4" CONTEMPORARY HANDRAIL B-6000 Contemporary Handrail B-6001 Contemporary Handrail B-6002 Contemporary Handrail B-6003 Contemporary Handrail Prices Are Subject To Change Without Notice ASH, HICKORY, WALNUT, BIRCH, QUARTERSAWN RED OAK, WHITE OAK, QUARTERSAWN WHITE OAK, MAHOGANY, SPANISH CEDAR, ALDER, BRAZILIAN CHERRY, AND PINE AVAILABLE BY SPECIAL ORDER SPECIFIED LENGTHS: ADD 15% NON-STOCK, SPECIAL ORDER APPROX. 2 WEEKS LEAD TIME JUL FAX info@bairdbrothers.com 95

14 HANDRAILS (CONT.) ITEM PROFILE DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY LJ-6109 SERIES LJ /8" Versatile Rail LJ-6109B Versatile Bending Rail (9 pcs) LJ-6109P0 1-7/8" Versatile Rail Plowed 1-1/4" LJ-6109P1 1-7/8" Versatile Rail Plowed 1-3/4" WALL RAILS B-6039 Wall Rail B-704 Wall Rail B-704 Solid Finger Joint B-6041 Wall Rail B-6042 Wall Rail Prices Are Subject To Change Without Notice ASH, HICKORY, WALNUT, BIRCH, QUARTERSAWN RED OAK, WHITE OAK, QUARTERSAWN WHITE OAK, MAHOGANY, SPANISH CEDAR, ALDER, BRAZILIAN CHERRY, AND PINE AVAILABLE BY SPECIAL ORDER SPECIFIED LENGTHS: ADD 15% NON-STOCK, SPECIAL ORDER APPROX. 2 WEEKS LEAD TIME 96 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

15 HANDRAILS (CONT.) ITEM PROFILE DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY SHOE RAILS B-6045 B-6006 Shoe Rail 3/4" x 2-1/2" Plowed 1-1/4" Hampton Shoe Rail 1-1/16" x 3-1/4" Plowed 1-3/4" B-6000S Contemporary Shoe Rail 3/4" x 2-1/2" Plowed 1-1/4" B-6001S Contemporary Shoe Rail 3/4" x 2-1/2" Plowed 1-3/4" FILLET B-6050 Fillet 3/8" x 1-1/4" B-702 Hampton Fillet 3/8" x 1-3/4" B-6000F Contemporary Fillet 3/8" x 1-1/4" B-6007 Contemporary Fillet 3/8" x 1-3/4" BENDING MOLD LJ-6010BM Bending Mold for use with LJ-6010B and LJ-6210B 2.10 LJ-6519BM Bending Mold for LP-6519B 3.70 Prices Are Subject To Change Without Notice ASH, HICKORY, WALNUT, BIRCH, QUARTERSAWN RED OAK, WHITE OAK, QUARTERSAWN WHITE OAK, MAHOGANY, SPANISH CEDAR, ALDER, BRAZILIAN CHERRY, AND PINE AVAILABLE BY SPECIAL ORDER SPECIFIED LENGTHS: ADD 20% NON-STOCK, SPECIAL ORDER APPROX. 2 WEEKS LEAD TIME JUL FAX info@bairdbrothers.com 97

16 COLONIAL S ERIES S TANDARD OVER THE POST SYSTEM Rails, 1-1/4" Balusters, Shoerails Refer to price guide on pages 102 and 103. LJ-6010 LJ-6010P B-6050 Fillet B-6045 Shoerail For use with 1-1/4" balusters. BB-5017 LJ-5035 LJ-5200 LJ-5141 LJ-5067 See pages for specs. Newels BB " x 43" Starting Newel BB " x 58" Landing Newel BB " x 48" Utility Newel BB " x 65" Landing Newel 98 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

17 COLONIAL S ERIES S TANDARD POST TO POST SYSTEM Rails, 1-1/4" Balusters, Shoerails Refer to price guide on pages 102 and 103. LJ-6010 LJ-6010P B-6050 Fillet B-6045 Shoerail For use with 1-1/4" balusters. BB-5017 LJ-5035 LJ-5200 LJ-5141 LJ-5067 See pages for specs. Newels BB-4040 (48") Utility Newel BB-4042 (56") Utility Newel BB-4053 (62") Intermediate Landing Newel* (level landing) BB-4055 (73") Intermediate Landing Newel* (2-winder) BB-4058 (78") Intermediate Landing Newel* (3-winder) BB-4045 (58") 2nd Floor Landing Newel BB-4099A (3") Newel Drop BB-4046 (73") Intermediate Landing Newel See page 138 for newel mounting hardware. *Requires a landing fitting assembly JUL FAX info@bairdbrothers.com 99

18 COLONIAL S ERIES H EAVY OVER THE POST SYSTEM Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 102 and 103. LJ-6210 LJ-6210P B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-5315 BB-5241 See pages for specs. Newels BB-4010A 3-1/2" x 43" Starting Newel 100 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

19 COLONIAL S ERIES H EAVY POST TO POST SYSTEM Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 102 and 103. LJ-6210 LJ-6210P B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-5315 BB-5241 See pages for specs. Newels 3-1/2" Square BB-4180 (48") Utility Newel BB-4182 (58") Utility Newel BB-4193 (62") Intermediate Landing Newel* (level landing) BB-4185 (58") 2nd Floor Landing Newel *Requires a landing fitting assembly BB-4299A (3-1/2") Newel Drop JUL FAX info@bairdbrothers.com 101

20 COLONIAL SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY POST TO POST STYLES BB " x 48" Short Utility Newel BB-4040BT 3" x 48" Short Utility Newel BB " x 56" Long Utility Newel BB-4042BT 3" x 56" Long Utility Newel BB " x 58" 2nd Floor Landing Newel BB-4045BT 3" x 58" 2nd Floor Landing Newel BB " x 73" Intermediate Landing Newel BB-4046BT 3" x 73" Intermediate Landing Newel BB-4053 BB-4053BT BB-4055 BB-4055BT BB-4058 BB-4058BT 3" x 62" Intermediate Landing Newel 3" x 62" Intermediate Landing Newel 3" x 73" Intermediate Landing Newel 3" x 73" Intermediate Landing Newel 3" x 78" Intermediate Landing Newel 3" x 78" Intermediate Landing Newel BB /2" x 48" Short Utility Newel BB /2" x 58" Long Utility Newel BB /2" x 62" Intermediate Landing Newel BB /2" x 58" 2nd Floor Landing Newel OVER THE POST STYLES BB " x 43" Short Utility Newel BB " x 48" Long Utility Newel BB " x 58" Intermediate Landing Newel BB " x 65" Intermediate Landing Newel BB-4010A 3-1/2" x 43" Short Utility Newel BB-4099A 1-11/16" x 3" Newel Drop BB-4299A 1-11/16" x 3-1/2" Newel Drop Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. 102 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

21 COLONIAL SERIES (CONT.) NUMBER DESCRIPTION PRIMED POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BB " 1-1/4" x 31" Taper Top Baluster BB " 1-1/4" x 34" Taper Top Baluster BB " 1-1/4" x 36" Taper Top Baluster BB " 1-1/4" x 39" Taper Top Baluster BB " 1-1/4" x 42" Taper Top Baluster LJ " 1-1/4" x 34" Taper Top Baluster LJ " 1-1/4" x 38" Taper Top Baluster LJ " 1-1/4" x 42" Taper Top Baluster LJ " 1-1/4" x 34" Square Top Baluster LJ " 1-1/4" x 38" Square Top Baluster LJ " 1-1/4" x 42" Square Top Baluster LJ " 1-1/4" x 34" Square Top Baluster LJ " 1-1/4" x 38" Square Top Baluster LJ " 1-1/4" x 42" Square Top Baluster LJ " 1-1/4" x 34" Taper Top Baluster LJ " 1-1/4" x 38" Taper Top Baluster LJ " 1-1/4" x 42" Taper Top Baluster BB " 1-3/4" x 31" Taper Top Baluster BB " 1-3/4" x 34" Taper Top Baluster BB " 1-3/4" x 36" Taper Top Baluster BB " 1-3/4" x 39" Taper Top Baluster BB " 1-3/4" x 42" Taper Top Baluster BB " 1-3/4" x 31" Square Top Baluster BB " 1-3/4" x 34" Square Top Baluster BB " 1-3/4" x 36" Square Top Baluster BB " 1-3/4" x 39" Square Top Baluster BB " 1-3/4" x 42" Square Top Baluster Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Overall baluster lengths are taken from bottom of the pin. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 103

22 H AMPTON S ERIES 1-1/4" OVER THE POST SYSTEM Rails, 1-1/4" Balusters, Shoerails Refer to price guide on page 110 and 111. LJ-6010 LJ-6010P The top of the pin top balusters is a straight dowel. B-6050 Fillet B-6045 Shoerail For use with 1-1/4" balusters. LJ-5200 See pages for specs. BB-180 Newels BB-240 3" x 43" Utility Newel BB-250 3" x 60" Landing Newel 104 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

23 H AMPTON S ERIES 1-1/4" POST TO POST SYSTEM Rails, 1-1/4" Balusters, Shoerails Refer to price guide on page 110 and 111. LJ-6010 LJ-6010P The top of the pin top balusters is a straight dowel. B-6050 Fillet B-6045 Shoerail For use with 1-1/4" balusters. LJ-5200 See pages for specs. BB-180 Newels BB-200 (48") Starting Newel BB-205 (60") Starting Newel BB-210 (48") Landing Newel BB-215 (60") Landing Newel BB-4099A (3") Newel Drop See page 138 for newel mounting hardware. JUL FAX info@bairdbrothers.com 105

24 H AMPTON S ERIES 1-3/4" Rails, 1-3/4" Balusters, Shoerails Refer to price guide on page 110 and 111. FITTINGS ARE AVAILABLE OVER THE POST SYSTEM LJ-6210 LJ-6519 The top of the pin top balusters is a straight dowel. LJ-6400 LJ-6210-P LJ-6519-P LJ-6400-P B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-160 BB8-160 (Octagonal) BB-170 BB8-170 (Octagonal) See pages for specs. Newels 3-1/2" Square Octagonal Style BB /2" x 43" Utility Newel BB /2" x 43" Landing Newel BB /2" x 60" Landing Newel BB /2" x 60" Landing Newel 106 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

25 H AMPTON S ERIES 1-3/4" Rails, 1-3/4" Balusters, Shoerails Refer to price guide on page 110 and 111. FITTINGS ARE AVAILABLE POST TO POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-160 BB8-160 (Octagonal) See pages for specs. Newels 3-1/2" Square BB-170 BB8-170 (Octagonal) Octagonal Style BB /2" x 48" Starting Newel BB /2" x 48" Landing Newel BB /2" x 48" Starting Newel BB /2" x 48" Landing Newel BB /2" x 60" Starting Newel BB /2" x 60" Landing Newel BB /2" x 60" Starting Newel BB /2" x 60" Landing Newel JUL FAX info@bairdbrothers.com 107

26 H AMPTON S ERIES Box Newels Refer to price guide on page 110 and /4" Flutes LJ-4075 (66-3/4") Box Newel LJ-4091 (55") Box Newel LJ-4091F (55") Fluted Box Newel 2-3/4" LJ-4091RP (55") Raised Panel Box Newel These box newels are assembled rather than solid. Suitable for use with all balusters. 108 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

27 H AMPTON S ERIES Square Ball Top Newels and Newel Drops Refer to price guide on page 110 and /4" 4 3/4" 55-1/4" 43-1/4" BB-4000BT 3-1/2" x 48" Starting Newel BB-4001BT 3-1/2" x 60" 2nd Floor Newel BB-4099A 3" BB-4299A 3-1/2" NEWEL DROP JUL FAX info@bairdbrothers.com 109

28 HAMPTON SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY NEWELS BB /2" x 48" Starting Newel BB /2" x 60" Starting Newel BB /2" x 48" Landing Newel BB /2" x 60" Landing Newel BB /2" x 43" Utility Newel BB /2" x 60" Landing Newel BB-200 3" x 48" Starting Newel BB-205 3" x 60" Starting Newel BB-210 3" x 48" Landing Newel BB-215 3" x 60" Landing Newel BB-240 3" x 43" Utility Newel BB-250 3" x 60" Landing Newel BB /2" x 48" Octogonal Starting Newel BB /2" x 60" Octagonal Starting Newel BB /2" x 48" Octagonal Landing Newel BB /2" x 60" Octagonal Landing Newel BB /2" x 43" Octagonal Utility Newel BB /2" x 60" Octagonal Landing Newel BB-4000BT 3-1/2" x 48"S4S Newel with Ball Top BB-4001BT 3-1/2" x 60"S4S Newel with Ball Top LJ /2" x 66-3/4" Box Newel LJ /4" x 55" Box Newel LJ-4091F 5" x 55" Fluted Box Newel LJ-4091RP 5" x 55" Raised Panel Box Newel BB-4099A 3" Newel Drop BB-4299A 3-1/2" Newel Drop Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

29 HAMPTON SERIES (CONT.) NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BB /4" x 31" Taper Top Baluster BB /4" x 34" Taper Top Baluster BB /4" x 36" Taper Top Baluster BB /4" x 39" Taper Top Baluster BB /4" x 42" Taper Top Baluster BB /4" x 31" Square Top Baluster BB /4" x 34" Square Top Baluster BB /4" x 36" Square Top Baluster BB /4" x 39" Square Top Baluster BB /4" x 42" Square Top Baluster BB /4" x 48" Square Top Baluster BB /4" x 31" Square Top Baluster BB /4" x 34" Square Top Baluster BB /4" x 36" Square Top Baluster BB /4" x 39" Square Top Baluster BB /4" x 42" Square Top Baluster BB /4" x 31" Octagonal Taper Top Baluster BB /4" x 34" Octagonal Taper Top Baluster BB /4" x 36" Octagonal Taper Top Baluster BB /4" x 39" Octagonal Taper Top Baluster BB /4" x 42" Octagonal Taper Top Baluster BB /4" x 31" Octagonal Square Top Baluster BB /4" x 34" Octagonal Square Top Baluster BB /4" x 36" Octagonal Square Top Baluster BB /4" x 39" Octagonal Square Top Baluster BB /4" x 42" Octagonal Square Top Baluster BB /4" x 48" Octagonal Square Top Baluster Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Overall baluster lengths are taken from bottom of the pin. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 111

30 CArolina S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 114 and 115. FITTINGS ARE AVAILABLE OVER THE POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400-P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-2015 BB-2005 See pages for specs. Newels 3-1/2" Square BB-3010 (43") Utility Newel* BB-3014 (48") Utility Newel BB-3015 (58") Intermediate Landing Newel (level landing) 112 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

31 CArolina S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 114 and 115. FITTINGS ARE AVAILABLE POST TO POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail For use with 1-3/4" balusters. BB-2015 See pages for specs. BB-2005 Newels 3-1/2" Square BB-3040 (48") Utility Newel BB-3042 (58") Utility Newel BB-3053 (62") Intermediate Landing Newel* (level landing) BB-3045 (58") 2nd Floor Landing Newel *Requires a landing fitting assembly BB-4299A (3-1/2") Newel Drop JUL FAX info@bairdbrothers.com 113

32 CAROLINA SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY NEWELS OVER THE POST STYLES BB /2" x 43" Short Utility Newel BB /2" x 48" Long Utility Newel BB /2" x 58" Landing Newel NEWELS POST TO POST STYLES BB /2" x 48" Starting Newel BB /2" x 58" Starting Newel BB /2" x 58" Landing Newel BB /2" x 62" Landing Newel C OME V ISIT O UR SHOWROOM 114 Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

33 CAROLINA SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BB /4" x 31" Baluster BB /4" x 34" Baluster BB /4" x 36" Baluster BB /4" x 39" Baluster BB /4" x 42" Baluster BB /4" x 31" Baluster BB /4" x 34" Baluster BB /4" x 36" Baluster BB /4" x 39" Baluster BB /4" x 42" Baluster Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Overall baluster lengths are taken from bottom of the pin. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 115

34 PRIMED BALUSTERS 1-3/4" NUMBER DESCRIPTION PRIMED LJFPR /4" x 34" LJFPR /4" x 38" LJFPR /4" x 42" LJFPR /4" x 34" LJFPR /4" x 38" LJFPR /4" x 42" LJPR /4" x 34" 4.50 LJFPR-2005 LJFPR-2015 LJPR /4" x 38" 4.85 LJPR /4" x 42" 5.25 LJPR /4" x 34" 5.40 LJPR /4" x 38" 5.80 LJPR /4" x 42" 6.30 LJPPR /4" x 34" 4.50 LJPPR /4" x 38" 4.85 LJPPR /4" x 42" 5.25 LJPPR-2005 LJPPR-2015 LJPR-5005 LJPR-5300 LJPPR /4" x 34" 7.35 LJPPR /4" x 38" 8.95 The top of the pin top balusters is a straight dowel. LJPPR /4" x 42" See pages for specs. 116 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

35 PRIMED BALUSTERS 1-1/4" NUMBER DESCRIPTION PRIMED LJPR /4" x 34" 2.35 LJPR /4" x 38" 2.55 LJPR /4" x 42" 2.85 LJPR /4" x 34" 3.90 LJPR /4" x 38" 4.95 LJPR /4" x 42" 5.95 LJPR /4" x 34" 3.00 LJPR /4" x 38" 3.30 LJPR-5015 LJPR-5035 LJPR-5067 LJPR /4" x 42" 3.60 LJPR /4" x 34" 2.95 LJPR /4" x 38" 3.15 LJPR /4" x 42" 3.50 LJPR /4" x 34" 3.70 LJPR /4" x 38" 4.75 LJPR /4" x 42" 5.70 LJPR-5141 LJPR-5200 The top of the pin top balusters is a straight dowel. See pages for specs. JUL FAX info@bairdbrothers.com 117

36 F LUTED S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 120 and 121. FITTINGS ARE AVAILABLE OVER THE POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400-P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail BBF-2015 See pages for specs. BBF-2005 Newels 3-1/2" Square BBF-3010 (43") Utility Newel BBF-3014 (50") Utility Newel BBF-3015 (58") Intermediate Landing Newel (level landing) BBF-3017 (65") Intermediate Landing Newel (2-winder) BBF-3018 (73") Intermediate Landing Newel (3-winder) 118 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

37 F LUTED S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 120 and 121. FITTINGS ARE AVAILABLE POST TO POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail BBF-2015 See pages for specs. BBF-2005 Newels 3-1/2" Square BBF-3040 (48") Utility Newel BBF-3042 (58") Utility Newel BBF-3053 (62") Intermediate Landing Newel* (level landing) BBF-3055 (73") Intermediate Landing Newel* (2-winder) BBF-3058 (78") Intermediate Landing Newel* (3-winder) *Requires a landing fitting assembly BBF-3045 (58") 2nd Floor Landing Newel BBF-3046 (73") Intermediate Landing Newel BB-4299A (3-1/2") Newel Drop See page 138 for newel mounting hardware. JUL FAX info@bairdbrothers.com 119

38 FLUTED SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY NEWELS OVER THE POST STYLES BBF /2" x 43" Newel BBF /2" x 50" Long Utility Newel BBF /2" x 58" Landing Newel BBF /2" x 65" Landing Newel BBF /2" x 73" Landing Newel NEWELS POST TO POST STYLES BBF /2" x 48" Starting Newel BBF /2" x 58" Starting Newel BBF /2" x 58" Landing Newel BBF /2" x 73" Landing Newel BBF /2" x 62" Landing Newel BBF /2" x 73" Landing Newel BBF /2" x 78" Landing Newel Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

39 FLUTED SERIES (CONT.) NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BBF /4" x 34" Baluster BBF /4" x 38" Baluster BBF /4" x 42" Baluster BBF /4" x 34" Baluster BBF /4" x 38" Baluster BBF /4" x 42" Baluster Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Overall baluster lengths are taken from bottom of the pin. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 121

40 TWISTED S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 124 and 125. FITTINGS ARE AVAILABLE OVER THE POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400-P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail BBT-2015 See pages for specs. BBT-2005 Newels 3-1/2" Square BBT-3010 (43") Utility Newel BBT-3014 (50") Utility Newel BBT-3015 (58") Intermediate Landing Newel (level landing) BBT-3017 (65") Intermediate Landing Newel (2-winder) BBT-3018 (73") Intermediate Landing Newel (3-winder) 122 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

41 TWISTED S ERIES Rails, 1-3/4" Balusters, Shoerails Refer to price guide on pages 124 and 125. FITTINGS ARE AVAILABLE POST TO POST SYSTEM LJ-6210 LJ-6519 LJ-6400 LJ-6210-P LJ-6519-P LJ-6400P The top of the pin top balusters is a straight dowel. B-702 Fillet B-6006 Shoerail BBT-2015 See pages for specs. BBT-2005 Newels 3-1/2" Square BBT-3040 (48") Utility Newel BBT-3042 (58") Utility Newel BBT-3053 (62") Intermediate Landing Newel* (level landing) BBT-3055 (73") Intermediate Landing Newel* (2-winder) BBT-3058 (78") Intermediate Landing Newel* (3-winder) *Requires a landing fitting assembly BBT-3045 (58") 2nd Floor Landing Newel BBT-3046 (73") Intermediate Landing Newel BB-4299A (3-1/2") Newel Drop See page 138 for newel mounting hardware. JUL FAX info@bairdbrothers.com 123

42 TWISTED SERIES NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY NEWELS OVER THE POST STYLES BBT /2" x 43" Short Utility Newel BBT /2" x 50" Long Utility Newel BBT /2" x 58" Landing Newel BBT /2" x 65" Landing Newel BBT /2" x 78" Landing Newel NEWELS POST TO POST STYLES BBT /2" x 48" Starting Newel BBT /2" x 58" Starting Newel BBT /2" x 58" Landing Newel BBT /2" x 73" Landing Newel BBT /2" x 62" Landing Newel BBT /2" x 73" Landing Newel BBT /2" x 78" Landing Newel Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

43 TWISTED SERIES (CONT.) NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BBT /4" x 34" Baluster BBT /4" x 38" Baluster BBT /4" x 42" Baluster BBT /4" x 34" Baluster BBT /4" x 38" Baluster BBT /4" x 42" Baluster Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Overall baluster lengths are taken from bottom of the pin. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 125

44 CONTEMPORARY NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY BALUSTERS BB /4" x 31" Baluster BB /4" x 34" Baluster BB /4" x 36" Baluster BB /4" x 39" Baluster BB /4" x 42" Baluster BB /4" x 48" Baluster BB /4" x 31" Baluster BB /4" x 34" Baluster BB /4" x 36" Baluster BB /4" x 39" Baluster BB /4" x 42" Baluster BB /4" x 48" Baluster BBC /4 x 31 Chamfered Baluster BBC /4 x 34 Chamfered Baluster BBC /4 x 36 Chamfered Baluster BBC /4 x 39 Chamfered Baluster BBC /4 x 42 Chamfered Baluster BBC /4 x 48 Chamfered Baluster NEWELS BB-4004S 3" x 3" x 48" S4S Newel BB-4005S 3" x 3" x 60" S4S Newel BB-4000S 3-1/2" x 48" S4S Newel BB-4001S 3-1/2" x 60" S4S Newel BB-4006S 4" x 48" S4S Newel BB-4007S 4" x 60" S4S Newel BB /2" x 48" S4S with Beveled Top Newel BB /2" x 60" S4S with Beveled Top Newel BB " x 48" S4S with Beveled Top Newel BB " x 60" S4S with Beveled Top Newel HANDRAILS See Page 95 for Price. 1 1/2" B-6000 B-6001 B-6000F Fillet B-6007 Fillet B-6003 Beveled Top B-6000S Shoe Rail B-6001S Shoe Rail 2 13/16" B BB-5060 BB-5360 BBC-5360 BB-4000 (48") BB-4001 (60") BB-4004S (3" x 48") BB-4005S (3" x 60") BB-4000S (3-1/2" x 48") BB-4001S (3-1/2" x 60") BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

45 O VER THE POST Applications of an Over The Post System All stair parts in this catalog are intended for interior use only. JUL FAX

46 O VER THE POST Conect-A-Kit L.J. Smith introduces the Conect-A-Kit method of assembling and installing handrail fittings. No rail bolts required! This unique new method will allow tremendous flexibility in the number of installation applications obtainable with each fitting. For example, aside from their traditional applications, seven of these fittings, used in combination, will make up 26 different landing fitting assemblies (formerly called 1-rise and 2-rise gooseneck fittings). Conect-A-Kit fittings are available in LJ-6010, LJ-6400, LJ-6519 and handrail profiles. EXPLODED VIEW OF TWO CONECT-A-KIT FITTINGS LJ-7021 Quarterturn with Cap LJ-7012 Upeasing All of the Conect-A-Kit fittings have a base with machined pockets and a removable method of assembling and installing handrail fittings. No rail bolts required! This unique new method will allow tremendous flexibility in the number of installation applications obtainable with each fitting. For example, aside from their traditional applications, seven of these fittings, used in combination, will make up 26 different landing fitting assemblies (formerly called 1-rise and 2-rise gooseneck fittings). Conect-A-Kit fittings are available in LJ-6010, LJ-6400, LJ-6519 and handrail profiles. THE CONECT-A-KIT FITTINGS PERFORM TWO FUNCTIONS Traditional Stairway Applications Build Landing Fitting Assemblies Conect-A-Kit fittings provide several advantages: VERSATILITY make left or right turns with the same fitting. Fittings can be used to make up a variety of fitting combinations. EASE OF ASSEMBLY most joint connections are made on top of the rail system for better access. No rail bolts required! ADDED STRENGTH the hardware included with each fitting provides better strength and tighter connections. THIS IS FASTER THAN USING INDUSTRY STANDARD GOOSENECK FITTINGS! All stair parts in this catalog are intended for interior use only. 128 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

47 O VER THE POST Starting Fittings All volutes and turnouts illustrated below are available in the following handrail profiles: LJ-6010, LJ-6010P, LJ-6210, LJ-6210P, LJ-6400, LJ-6400P, LJ-6519 and LJ-6519P (all drawings are in proportion to the LJ-6010.) All starting fittings illustrated on this page are packaged as two pieces unassembled. Each volute and turnout is packaged with the appropriate template. When ordering starting fittings to match chosen handrail, the second digit indicates matching rail profile. Refer to the example beneath the handrail profile drawing below. HANDRAIL PROFILE LJ-6010 LJ-6010P LJ-6210 LJ-6210P LJ-6400 LJ-6400P LJ-6519 LJ-6519P LEFT HAND LJ-7041 LJ-7041P LJ-7241 LJ-7241P LJ-7441 LJ-7441P LJ-7541 LJ-7541P TURNOUT All stair parts in this catalog are intended for interior use only. STARTING EASING WITH CAP LJ-7010*...(use with LJ-6010) LJ-7210*...(use with LJ-6210) LJ-7410*...(use with LJ-6400) LEFT HAND VOLUTE RIGHT HAND VOLUTE LJ-7030*...(use with LJ-6010)... LJ-7035* LJ-7230*...(use with LJ-6210)... LJ-7235* LJ-7430*...(use with LJ-6400)... LJ-7435* LJ-7530*...(use with LJ-6519)... LJ-7535* LEFT HAND TURNOUT RIGHT HAND TURNOUT LJ-7041*...(use with LJ-6010)... LJ-7046* LJ-7241*...(use with LJ-6210)... LJ-7246* LJ-7441*...(use with LJ-6400)... LJ-7446* LJ-7541*...(use with LJ-6519)... LJ-7546* LEFT HAND TURNOUT RIGHT HAND TURNOUT LJ-7040*...(use with LJ-6010)... LJ-7045* LJ-7240*...(use with LJ-6210)... LJ-7245* LJ-7440*...(use with LJ-6400)... LJ-7445* LJ-7540*...(use with LJ-6519)... LJ-7545* *All starting fittings illustrated on this page are available with a 90 upeasing unattached. Please specify with a -90 suffix. Example: LJ Notes: Using a starting fitting with a 90 upeasing requires a custom ordered LJ-8440, LJ-8640, LJ-8460 or LJ-8660 starting step (see pages 134 and 135). JUL FAX info@bairdbrothers.com 129

48 O VER THE POST Climbing Volutes The Climbing Volutes are an addition to our line of code compliance products to provide a more attractive alternative to the extra long newel post on the starting step. The Climbing Volutes are available in the following non-plowed, handrail profiles: LJ-6010, LJ-6210, LJ-6400, and LJ Each volute requires 4 or 5 balusters. Climbing Volutes are a one-piece fitting, and are not part of the Conect-A-Kit fitting line. When using a climbing volute, the newel height at the volute will be approximately 42" lower than what is produced with a standard volute. This dimension will vary with rise and run of the stairway. LEFT HAND CLIMBING VOLUTE RIGHT HAND CLIMBING VOLUTE LJ-7031 LJ-7231 LJ-7431 LJ-7531 Use the Climbing Volutes with LJ-8310 or LJ-8315 Starting Steps LJ-7036 LJ-7236 LJ-7436 LJ-7536 The pictures below illustrate the climbing volute and a standard volute on the same stairway. Climbing Volute Standard Volute Pictured: LJ-7036 Right Hand Climbing Volute, LJ-6010 Handrail, LJ-4010 Utility Newel, LJ-5015 Balusters. Pictured: LJ-7035 Right Hand Volute, LJ-6010 Handrail, LJ-4010 Utility Newel, LJ-5015 Balusters. All stair parts in this catalog are intended for interior use only. 130 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

49 O VER THE POST Upeasings, Caps, Quarterturns The Upeasings and Over Easings are used when rise changes. The Level Quarterturn is used without a newel. The Quarterturn with Cap is used with a newel. The Tandem Cap allows for additional newels to be inserted into a long level stretch of rail for strength. All fittings below are available in the LJ-6010, LJ-6210, LJ-6400, LJ-6519 and rail profiles. Use the same fitting part number for plowed rails as for non-plowed rails as for non-plowed rail profiles. HANDRAIL PROFILE LEVEL QUARTERTURN When ordering starting fittings to match chosen handrail, the second digit indicates matching rail profile. Refer to the example beneath the handrail profile drawing below. LJ-6010 LJ-6010P LJ-6210 LJ-6210P LJ-6400 LJ-6400P LJ-6519 LJ-6519P LJ-7011 LJ-7211 LJ-7411 LJ-7511 All stair parts in this catalog are intended for interior use only. Over Easings are not Conect-A-Kit RETURNED END LEVEL QUARTERTURN UPEASINGS OVER EASING UPEASING 90 LJ-7009 LJ-7209 LJ-7409 LJ-7509 LJ-7011 LJ-7211 LJ-7411 LJ-7511 LJ-7012* LJ-7212* LJ-7412* LJ-7512* LJ-7013* LJ-7213* LJ-7413* LJ-7513* LJ-7014* LJ-7214* LJ-7414* LJ-7514* packaged as two pieces unassembled packaged as two pieces unassembled OVER EASING TANDEM CAP LJ-7020* LJ-7220* LJ-7420* LJ-7520* STARTING EASING LJ-7015* LJ-7215* LJ-7415* LJ-7515* LJ-7016* LJ-7216* LJ-7416* LJ-7516* Coped Ends are not Conect-A-Kit Coped End QUARTERTURN WITH CAP LJ-7021 LJ-7221 LJ-7421 LJ-7521 QUARTERTURN WITH CAP 135 LJ LJ LJ LJ Custom angles are not Conect-A-Kit Custom angles assembled at the factory. Call your supplier for details. COPED CAP LJ-7008 LJ-7208 OPENING CAP LJ-7019 LJ-7219 LJ-7419 LJ-7519 Opening End The coped end and opening cap may be attached on the job using a rail bolt. This will accommodate almost any angle. JUL FAX info@bairdbrothers.com 131

50 LJ-6010 LJ-6210 RAIL FITTINGS & 6210 NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY LJ-6010 RAIL FITTINGS LJ-7008 Coped End for LJ LJ " Returned End for LJ LJ-7010 Starting Easing LJ Starting Easing with 90 Upeasing LJ-7011 Level Quarterturn LJ-7012 Upeasing LJ-7013 Overhand Easing LJ-7014 Upeasing 90º LJ-7019 One Opening Newel Cap LJ-7020 Two Opening Newel Cap LJ-7021 Quarterturn Newel Cap LJ-7030 L.H. Volute LJ L.H. Volute with 90º Upeasing LJ-7031 L.H. Compound Climbing Volute LJ-7035 R.H. Volute LJ R.H. Volute with 90º Upeasing LJ-7036 R.H. Compound Climbing Volute LJ-7038 Vertical Volute LJ-7040 L.H. Turnout 5" C to C LJ L.H. Turnout with 90º Upeasing 5" C to C LJ-7045 R.H. Turnout 5" C to C LJ R.H. Turnout with 90º Upeasing 5" C to C LJ-7041 L.H. Turnout 3" C to C LJ L.H. Turnout with 90º Upeasing 3" C to C LJ-7046 R.H. Turnout 3" C to C LJ R.H. Turnout with 90º Upeasing 3" C to C LJ-7047 Left Hand "S" Shaped Fitting LJ-7048 Right Hand "S" Shaped Fitting LJ-70RD Rail Drop LJ-6210 RAIL FITTINGS LJ-7208 Coped End for LJ LJ " Returned End for LJ LJ-7210 Starting Easing LJ Starting Easing with 90º Upeasing LJ-7211 Level Quarterturn LJ-7212 Upeasing LJ-7213 Overhand Easing LJ-7214 Upeasing 90º LJ-7219 One Opening Newel Cap LJ-7220 Two Opening Newel Cap LJ-7221 Quarterturn Newel Cap LJ-7230 L.H. Volute LJ L.H. Volute with 90 Upeasing LJ-7231 L.H. Compound Climbing Volute LJ-7235 R.H. Volute LJ R.H. Volute with 90 Upeasing LJ-7236 R.H. Compound Climbing Volute LJ-7238 Vertical Volute LJ-7240 L.H. Turnout 5" C to C LJ L.H. Turnout with 90º Upeasing 5" C to C LJ-7245 R.H. Turnout 5" C to C LJ R.H. Turnout with 90º Upeasing 5" C to C LJ-7241 L.H. Turnout 3" C to C LJ L.H. Turnout with 90º Upeasing 3" C to C LJ-7246 R.H. Turnout 3" C to C LJ R.H. Turnout with 90º Upeasing 3" C to C LJ-7247 Left Hand "S" Shaped Fitting LJ-7248 Right Hand "S" Shaped Fitting LJ-72RD Rail Drop ADDITIONAL CHARGE FOR PLOWED FITTINGS (SHIPPED WITH FILLET) -- CALL FOR AVAILABILITY 132 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

51 RAIL FITTINGS & 6519 NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY LJ-6400 RAIL FITTINGS LJ " Returned End for LJ LJ-7410 Starting Easing LJ Starting Easing with 90 Upeasing LJ-7411 Level Quarterturn LJ-7412 Upeasing LJ-7413 Overhand Easing LJ-7414 Upeasing LJ-7419 One Opening Newel Cap LJ-6400 LJ-6519 LJ-7420 Two Opening Newel Cap LJ-7421 Quarterturn Newel Cap LJ-7430 L.H. Volute LJ L.H. Volute with 90 Upeasing LJ-7431 L.H. Compound Climbing Volute LJ-7435 R.H. Volute LJ R.H. Volute with 90 Upeasing LJ-7436 R.H. Compound Climbing Volute LJ-7438 Vertical Volute LJ-7440 L.H. Turnout 5" C to C LJ L.H. Turnout with 90 Upeasing 5" C to C LJ-7445 R.H. Turnout 5" C to C LJ R.H. Turnout with 90 Upeasing 5" C to C LJ-7447 Left Hand "S" Shaped Fitting LJ-7448 Right Hand "S" Shaped Fitting LJ-74RD Rail Drop LJ-6519 RAIL FITTINGS LJ " Returned End for LJ LJ-7510 Starting Easing LJ Starting Easing with 90 Upeasing LJ-7511 Level Quarterturn LJ-7512 Upeasing LJ-7513 Overhand Easing LJ-7514 Upeasing LJ-7519 One Opening Newel Cap LJ-7520 Two Opening Newel Cap LJ-7521 Quarterturn Newel Cap LJ-7530 L.H. Volute LJ L.H. Volute with 90 Upeasing LJ-7531 L.H. Compound Climbing Volute LJ-7535 R.H. Volute LJ R.H. Volute with 90 Upeasing LJ-7536 R.H. Compound Climbing Volute LJ-7538 Vertical Volute LJ-7540 L.H. Turnout 5" C to C LJ L.H. Turnout with 90 Upeasing 5" C to C LJ-7545 R.H. Turnout 5" C to C LJ R.H. Turnout with 90 Upeasing 5" C to C LJ-7547 Left Hand "S" Shaped Fitting LJ-7548 Right Hand "S" Shaped Fitting LJ-75RD Rail Drop ADDITIONAL CHARGE FOR PLOWED FITTINGS (SHIPPED WITH FILLET) -- CALL FOR AVAILABILITY JUL FAX info@bairdbrothers.com 133

52 S S TARTING TEPS All Starting Steps are shipped with necessary cove and shoe moulding. All starting steps are availabe in longer lengths, 48" being the standard. Single Bullnose Starting Steps are reversible and can be job cut for shorter lengths. Specifications: Tread 1" x 11-1/2". Total rise 8-1/32". Riser measure 3/4"x 7". For Use with Volutes and Turnouts For Use with Square Top and Box Newels, and 90 Starting Fittings For Use with Box Newels All stair parts in this catalog are intended for interior use only. 134 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

53 S TARTING S TEPS LJ False End Starting Step of LJ-8010 LJ False End Starting Step of LJ-8310 The False End Step is used when carpeting center of stairs when a volute or turnout is used. The kit is reversible for L.H. or R.H. applications. Shipped as a set with cove and shoe moulding. LJ-8010 LJ-8015 LJ-8030 LJ-8040 LJ-8050 LJ-8060 LJ-8310 LJ-8315 LJ-8440 LJ-8460 LJ-8640 LJ-8660 STARTING STEPS NUMBER WIDTH POPLAR RED OAK HARD MAPLE, HICKORY, or WHITE OAK CHERRY 48" " " " " " " " " " " " " " " " " " " " " " " " LJ LJ LJ Maple Only LJ-8078* Maple Only 4.75 LJ-8076** Maple Only 7.75 LJ-8440, LJ-8460, LJ-8660 are for use with starting fittings with 90 upeasings. *The LJ-8078 is only available in random lengths. **The LJ-8076 and riser included in false tread kit is reversible; one side is stain grade, the other side is paint grade. JUL FAX info@bairdbrothers.com 135

54 TREADS, R ISERS, AND R OSETTES Treads, Risers, and Mouldings 5/16 " 2-1/4" B-607 Lineal Stair Nosing 1" x 1-1/2" B-610 is used with newels that are 3-1/2" or wider. 5/16" 4-1/4" B-609 Landing Tread 1-1/16" x 3-1/2" B-610 Landing Tread 1-1/16" x 5-1/2" B-607R Stair Tread Return 1" x 1-1/2" x 13" B-001 Shoe Mould 1/2" x 3/4" B-921 Cove Mould 3/4" x 3/4" Rosettes and Brackets Handrail Brackets Use LJ-7026 and LJ-7027 with LJ-6010(P), LJ-6210(P), LJ-6519(P), LJ-6400(P), LJ-6601(P), LJ-6701(P), LJ-6109(P0,P1) BB-7026 BB-7027 BB-7037 Side view of Rosettes All stair parts in this catalog are intended for interior use only. LJ-3027 Polished Solid Brass Wall Rail Bracket $18.25 IVES HANDRAIL BRACKETS DESCRIPTION NUMBER PRICE Bright Brass 059A3 $1.83 Antique Brass 059A Oil Rubbed Bronze 059A10B 2.30 Satin Chrome 059A Solid Antique Pewter 059B15A Solid Satin Nickel 059B BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

55 TREADS & RISERS NUMBER DESCRIPTION POPLAR RED OAK HARD MAPLE CHERRY HICKORY ASH WALNUT STAIR TREADS (PRICE PER PIECE) Returned ends - add $ end, add $ ends B " x 10-1/2" x 36" B " x 10-1/2" x 42" B " x 10-1/2" x 48" B " x 10-1/2" x 54" B " x 10-1/2" x 60" B " x 10-1/2" x 72" B " x 11-1/2" x 36" B " x 11-1/2" x 42" B " x 11-1/2" x 48" B " x 11-1/2" x 54" B " x 11-1/2" x 60" B " x 11-1/2" x 72" NON STOCK NUMBER DESCRIPTION WHITE OAK QTR. SAWN RED OAK QTR. SAWN WHITE OAK HONURAN MAHOGANY AFRICAN MAHOGANY STAIR TREADS (PRICE PER PIECE) Returned ends - add $ end, add $ ends B " x 10-1/2" x 36" B " x 10-1/2" x 42" B " x 10-1/2" x 48" B " x 10-1/2" x 54" B " x 10-1/2" x 60" B " x 10-1/2" x 72" B " x 11-1/2" x 36" B " x 11-1/2" x 42" B " x 11-1/2" x 48" B " x 11-1/2" x 54" B " x 11-1/2" x 60" B " x 11-1/2" x 72" NON STOCK STAIR RISERS NUMBER DESCRIPTION POPLAR OAK HARD MAPLE CHERRY ASH WALNUT B-736 3/4" x 7-1/2" x 36" USE 1 x 8 USE 1 x 8 USE 1 x 8 USE 1 x 8 PAGE 37 PAGE 37 PAGE 36 PAGE 37 B-742 3/4" x 7-1/2" x 42" USE 1 x 8 PAGE 37 B-748 3/4" x 7-1/2" x 48" USE 1 x 8 PAGE 37 ROSETTES AND BRACKETS USE 1 x 8 PAGE 37 USE 1 x 8 PAGE 37 USE 1 x 8 PAGE 36 USE 1 x 8 PAGE 36 NUMBER DESCRIPTION POPLAR OAK HARD MAPLE CHERRY ASH WALNUT BB-7026 Rosette, Round 4-7/8" BB-7027 Rosette, Oval BB-7037 Rosette, Oval LJ-7028 Stair Bracket CALL CALL CALL CALL LJ-7029 Stair Bracket CALL CALL CALL CALL ALDER USE 1 x 8 PAGE 37 USE 1 x 8 PAGE 37 Please call for lead time on all non-stock items and special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 137

56 I NSTALLATION HARDWARE Newel Mounting Kits $ 8.75 $ $ OAK OR POPLAR OAK $ POPLAR $ $ OAK OR POPLAR $ OAK OR POPLAR Miscellaneous Hardware $ $ 1.20 $ 5.00 OAK OR POPLAR OAK OR POPLAR All stair parts in this catalog are intended for interior use only. 138 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

57 I NSTALLATION HARDWARE Miscellaneous Hardware $ 2.25 OAK OR POPLAR $ 2.25 $ 2.50 $ $ $ OAK OR POPLAR OAK OR POPLAR OAK OR POPLAR Handrail and Fitting Tools $ $ LJ-3044 VersaTool Locates holes as well as starts and tightens hex nuts onto rail bolts. Drives 5/16" rail bolts and tightens 1/2" hex nuts. Also used to locate 1/4" pilot hole on handrails and rail drops for attaching to Conect-A-Kit handrail fittings. $ $ $ $ All stair parts in this catalog are intended for interior use only. JUL FAX info@bairdbrothers.com 139

58 I NSTALLATION TOOLS Baluster Marking and Installation Tools $ $ $ 6.75 Chuck-Buster Tools All of the tools shown below fit the Chuck-Buster $ $ $ $ $ $ $ All stair parts in this catalog are intended for interior use only. 140 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

59 I NSTALLATION TOOLS Bore Buster $ $ JUL FAX info@bairdbrothers.com 141

60 S PECIAL O RDER S ECTION Balusters CHALLIS SERIES Newels 3 and 3-1/2" Square 3 and 3-1/2" Square LJP-3210 (43"x3") Utility Newel* LJP-3214 (50"x3") Utility Newel* LJP-3215 (58"x3") Intermediate Landing Newel (level landing) LJP-3217 (65"x3") Intermediate Landing Newel (2-winder) LJP-3218 (73"x3") Intermediate Landing Newel (3-winder) LJP-3310 (43"x3-1/2") Utility Newel* LJP-3314 (50"x3-1/2") Utility Newel* LJP-3315 (58"x3-1/2") Intermediate Landing Newel (level landing) LJP-3317 (65"x3-1/2") Intermediate Landing Newel (2-winder) LJP-3318 (73"x3-1/2") Intermediate Landing Newel (3-winder) 19" for 3210 or " for 3214 or " for 3215 or " for 3217 or " for 3218 or 3318 LJF-3210 (43"x3") Utility Newel* LJF-3214 (50"x3") Utility Newel* LJF-3215 (58"x3") Intermediate Landing Newel (level landing) LJF-3217 (65"x3") Intermediate Landing Newel (2-winder) LJF-3218 (73"x3") Intermediate Landing Newel (3-winder) LJF-3310 (43"x3-1/2") Utility Newel* LJF-3314 (50"x3-1/2") Utility Newel* LJF-3315 (58"x3-1/2") Intermediate Landing Newel (level landing) LJF-3317 (65"x3-1/2") Intermediate Landing Newel (2-winder) LJF-3318 (73"x3-1/2") Intermediate Landing Newel (3-winder) 19" for 3210 or " for 3214 or " for 3215 or " for 3217 or " for 3218 or and 3-1/2" Square 14-1/2" for 3240 or /2" for 3242 or /2" for 3253 or /2" for 3255 or /2" for 3258 or LJP-3240 (48"x3") Utility Newel LJP-3242 (58"x3") Utility Newel LJP-3253 (62"x3") Intermediate Landing Newel* (level landing) LJP-3255 (73"x3") Intermediate Landing Newel* (2-winder) LJP-3258 (78"x3") Intermediate Landing Newel* (3-winder) LJP-3340 (48"x3-1/2") Utility Newel LJP-3342 (58"x3-1/2") Utility Newel LJP-3353 (62"x3-1/2") Intermediate Landing Newel* (level landing) LJP-3355 (73"x3-1/2") Intermediate Landing Newel* (2-winder) LJP-3358 (78"x3-1/2") Intermediate Landing Newel* (3-winder) *Requires a landing fitting assembly LJP-3245 (58"x3") 2nd Floor Landing Newel LJP-3345 (58"x3-1/2") 2nd Floor Landing Newel LJP-3246 (73"x3") Intermediate Landing Newel LJP-3346 (73"x3-1/2") Intermediate Landing Newel LJ-4099A (3") Newel Drop LJ-4299A (3-1/2") Newel Drop See page 130 for newel mounting hardware. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

61 S PECIAL O RDER S ECTION Newels CHALLIS SERIES 14-1/2" for 3240 or /2" for 3242 or /2" for 3253 or /2" for 3255 or /2" for 3258 or 3358 LJF-3240 (48"x3") Utility Newel LJF-3242 (58"x3") Utility Newel LJF-3253 (62"x3") Intermediate Landing Newel* (level landing) LJF-3255 (73"x3") Intermediate Landing Newel* (2-winder) LJF-3258 (78"x3") Intermediate Landing Newel* (3-winder) LJF-3340 (48"x3-1/2") Utility Newel LJF-3342 (58"x3-1/2") Utility Newel LJF-3353 (62"x3-1/2") Intermediate Landing Newel* (level landing) LJF-3355 (73"x3-1/2") Intermediate Landing Newel* (2-winder) LJF-3358 (78"x3-1/2") Intermediate Landing Newel* (3-winder) LJF-3245 (58"x3") 2nd Floor Landing Newel LJF-3345 (58"x3-1/2") 2nd Floor Landing Newel LJF-3246 (73"x3") Intermediate Landing Newel LJF-3346 (73"x3-1/2") Intermediate Landing Newel LJ-4050 (43") Starting Newel (Turned Bottom) LJP4060 (43") Starting Newel (Turned Bottom) *Requires a landing fitting assembly LJ-4099A (3") Newel Drop LJ-4299A (3-1/2") Newel Drop See page 130 for newel mounting hardware. JUL FAX info@bairdbrothers.com 143

62 BALUSTER SPECIFICATIONS NUMBER DESCRIPTION 31" 34" 36" 39" 42" 48" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB-5017 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 13-5/8" 19-5/8" Turned Area 22-5/8" 22-5/8" 27-5/8" 27-5/8" 27-5/8" 27-5/8" Top Pin Diameter 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" Bottom Pin - 3/4" - 3/4" 3/4" - LJ-5035 Bottom Square - 6" - 10" 14" - Turned Area - 28" - 28" 28" - Top Pin Diameter - 5/8" - 5/8" 5/8" - Bottom Pin - 3/4" - 3/4" 3/4" - LJ-5200 Bottom Square - 7" - 11" 15" - Turned Area - 27" - 27" 27" - Top Pin Diameter - 5/8" - 5/8" 5/8" - Bottom Pin - 3/4" - 3/4" 3/4" - LJ-5141 Bottom Square - 7" - 11" 15" - Turned Area - 20" - 20" 20" - Top Square - 7" - 7" 7" - Bottom Pin - 3/4" - 3/4" 3/4" -+ LJ-5067 Bottom Square - 7" - 11" 15" - Turned Area - 20" - 20" 20" - Top Square - 7" - 7" 7" - Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB-5315 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 13-5/8" 19-5/8" Turned Area 22-5/8" 25-5/8" 27-5/8" 27-5/8" 27-5/8" 27-5/8" Top Pin Diameter 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" - BB-5241 Bottom Square 8-1/4" 8-1/4" 8-1/4" 8-1/4" 8-1/4" - Turned Area 16-3/4" 18-3/4" 20-3/4" 23-3/4" 26-3/4" - Top Square 5-1/4" 6-1/4" 6-1/4" 6-1/4" 6-1/4" - Bottom Pin 3/4" 3/4" 3/4" 3/4" - - BB-180 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 9-13/16" 12-13/16" Turned Area 17-3/8" 20-3/8" 22-3/8" 22-3/8" 22-3/8" 22-3/8" Top Square 5-1/4" 5-1/4" 5-1/4" 5-1/4" 9-13/16" 12-13/16" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB-160 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 13-5/8" 19-5/8" Turned Area 22-5/8" 25-5/8" 27-5/8" 27-5/8" 27-5/8" 27-5/8" Top Pin Diameter 5-3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB8-160 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 13-5/8" 19-5/8" Turned Area 22-5/8" 25-5/8" 27-5/8" 27-5/8" 27-5/8" 27-5/8" Top Pin Diameter 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 144 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

63 BALUSTER SPECIFICATIONS NUMBER DESCRIPTION 31" 34" 36" 39" 42" 48" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB-170 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 9-13/16" 12-13/16" Turned Area 17-3/8" 20-3/8" 22-3/8" 22-3/8" 22-3/8" 22-3/8" Top Square 5-1/4" 5-1/4" 5-1/4" 5-1/4" 9-13/16" 12-13/16" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" BB8-170 Bottom Square 7-5/8" 7-5/8" 7-5/8" 10-5/8" 9-13/16" 12-13/16" Turned Area 17-3/8" 20-3/8" 22-3/8" 22-3/8" 22-3/8" 22-3/8" Top Square 5-1/4" 5-1/4" 5-1/4" 5-1/4" 9-13/16" 12-13/16" Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" - BB-2015 Bottom Square 7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" - Turned Area 23-1/2" 26-1/2" 28-1/2" 31-1/2" 34-1/2" - Top Pin Diameter 3/4" 3/4" 3/4" 3/4" 3/4" - Bottom Pin 3/4" 3/4" 3/4" 3/4" 3/4" - BB-2005 Bottom Square 7-1/2" 7-1/2" 7-1/2" 10-1/2" 10-1/2" - Turned Area 17" 20" 22" 22" 22" - Top Square 5-3/4" 5-3/4" 5-3/4" 5-3/4" 8-3/4" - Bottom Pin - 3/4" - 3/4" 3/4" - BBF-2015 Bottom Square - 6" - 10" 14" - Turned Area - 28" - 28" 28" - Top Pin Diameter - 3/4" - 3/4" 3/4" - Bottom Pin - 3/4" - 3/4" 3/4" - BBF-2005 Bottom Square - 7" - 11" 15" - Turned Area - 20" - 20" 20" - Top Square - 7" - 7" 7" - Bottom Pin - 3/4" - 3/4" 3/4" - BBT-2015 Bottom Square - 6" - 10" 14" - Turned Area - 28" - 28" 28" - Top Pin Diameter 3/4" 3/4" 3/4" 3/4" 3/4" - Bottom Pin - 3/4" - 3/4" 3/4" - BBT-2005 Bottom Square - 7" - 11" 15" - Turned Area - 20" " - Top Square 7" - 7" 7" - Overall baluster lengths are taken from bottom of the pin. Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 145

64 NEWEL POST SPECIFICATIONS NUMBER BOTTOM SQUARE TURNED AREA TOP SQUARE MUSHROOM HEIGHT BALL HEIGHT BB " 27" BB " 27" BB " 27" BB " 27" BB " 23-3/8" 5" 2-5/8" 3-11/16" BB " 23-3/8" 5" 2-5/8" 3-11/16" BB /8" 19-1/2" 19-1/2" 2-5/8" 3-11/16" BB /8" 16" 13" 2-5/8" 3-11/16" BB " 23-3/8" 5" 2-5/8" 3-11/16" BB " 23-3/8" 5" 2-5/8" 3-11/16" BB " 23-3/8" 5" 2-5/8" 3-11/16" BB /8" 23" 5" 2-5/8" - BB /8" 23" 5" 2-5/8" - BB /2" 19-1/2" 11" 2-5/8" - BB /8" 23" 5" 2-5/8" - BB " 25" BB " 25" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 17-3/4" 11" - 4-1/2" BB /4" 17-3/4" 13" - 4-1/2" BB " 25" BB " 25" BB " 25" BB " 25" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 20-3/4" 5" - 4-1/2" BB /4" 17-3/4" 11" - 4-1/2" BB /4" 17-3/4" 11" 4-1/2" - BB /4" 17-3/4" 13" 4-1/2" - BB /4" 17-3/4" 13" 4-1/2" - Top Pin on all Over The Post Newels = 3/4" dia. x 3/4" long 146 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

65 NEWEL POST SPECIFICATIONS NUMBER BOTTOM SQUARE TURNED AREA TOP SQUARE MUSHROOM HEIGHT BALL HEIGHT BB " 27" BB " 27" BB " 27" BB /4" 23" 5" - 4-3/4" BB /4" 23" 5" - 4-3/4" BB /4" 19-1/2" 11" - 4-3/4" BB /4" 23" 5" - 4-3/4" BBF " 27" BBF " 27" BBF " 27" BBF " 27" BBF " 27" BBF /4" 23" 5" - 4-3/4" BBF /4" 23" 5" - 4-3/4" BBF /4" 19-1/2" 11" - 4-3/4" BBF /4" 16" 14-1/2" - 4-3/4" BBF /4" 23" 5" - 4-3/4" BBF /4" 23" 5" - 4-3/4" BBF /4" 23" 5" - 4-3/4" BBT " 27" BBT " 27" BBT " 27" BBT " 27" BBT " 27" BBT /4" 23" 5" - 4-3/4" BBT /4" 23" 5" - 4-3/4" BBT /4" 19-1/2" 11" - 4-3/4" BBT /4" 16" 14-1/2" - 4-3/4" BBT /4" 23" 5" - 4-3/4" BBT /4" 23" 5" - 4-3/4" BBT /4" 23" 5" - 4-3/4" Top Pin on all Over The Post Newels = 3/4" dia. x 3/4" long Ash, Walnut, and Mahogany available special order. Delivery time on non-stock items, quoted per order. Please call for lead time on all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 147

66 HB&G or Turncraft Composite Columns 148 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

67 Composite C OLUMNS Weatherproof, Insect Proof Installs with Common Carpentry Tools and Supplies Composite Round Columns BASE AND CAP SETS SOLD SEPARATELY Needs No Painting for Up to Five Years Meets National Building Codes SIZE LOAD MAXIMUM BEARING 8" x 8' 10,000 lbs. 8" x 9' 10,000 lbs. 8" x 10' 10,000 lbs. 10" x 8' 14,000 lbs. 10" x 9' 14,000 lbs. 10" x 10' 14,000 lbs. 12" x 8' 18,000 lbs. 12" x 10' 18,000 lbs. 12" x 12' 18,000 lbs. Low Maintenance Architecturally Correct Lifetime Warranty Shown with base and cap. CALL FOR PRICE Composite Square Columns BASE AND CAP SETS SOLD SEPARATELY SIZE LOAD MAXIMUM BEARING 6" x 8' 8,000 lbs. 6" x 10' 8,000 lbs. 8" x 8' 10,000 lbs. 8" x 10' 10,000 lbs. 10" x 8' 14,000 lbs. 10" x 10' 14,000 lbs. 10" x 12' 14,000 lbs. CALL FOR PRICE SPECIAL ORDERS: PermaCast Round Columns available up to 22" x 26'. PermaCast Square Columns available up to 16" x 20'. Polyurethane Ornamental Capitals available in eight styles. Delivery time on non-stock items, quoted per order. Please allow 4 weeks for all special orders. Prices subject to change without notice. JUL FAX info@bairdbrothers.com 149

68 W OOD R OUND C OLUMNS Tongue and Groove Exterior Glue Individually Wrapped SIZE MAXIMUM LOAD BEARING 6" x 8' 1,500 lbs. 8" x 8' 2,000 lbs. 8" x 10' 2,000 lbs. 10" x 8' 3,000 lbs. 10" x 10' 3,000 lbs. 12" x 8' 4,200 lbs. 12" x 10' 4,200 lbs. 12" x 8' 4,200 lbs. (Base and cap set sold separately.) CALL FOR PRICES Shown with base and cap. SPECIAL ORDERS: Sizes available in round pine up to 30" x 30'. Polyurethane Ornamental Capitals available in eight styles. Architectural solid stave clear columns. Southern Yellow Pine, Ponderosa Pine, Red Oak, Maple, Spanish Cedar, Mahogany, Cherry, Ash, and Walnut. 150 Call for prices on plain column, fluted column, and poly cap and base. Prices subject to change without notice. BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

69 NOTES JUL FAX

70 NOTES 152 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH JUL 11

71

72