I ndex. Interior Doors. Stair Parts MOULDINGS INTERIOR DOORS STAIR PARTS

Transcription

1

2

3 I ndex Mouldings Arch Top Casing Azek Bar Rail & Corners Baseboard Base Blocks...43, Base Corner Blocks Butcher Blocks or Plank Tops Cabinet Doors Casing Chair Rail Corner Guards Crown Blocks Crown Cypress Door Stop Door Jambs Dowel Rod Drawer Fronts Floor Mouldings Flooring Accessories Franklin Wood Glue Hardwood Flooring Hardwood Flooring Expansion Janka Hardness Table Mantles & Brackets MDF Mouldings Misc. Mouldings Mullions Nails/Brads Picture Frame Pine Mouldings Plinth Blocks Plywood Pre-Finishing Red Cedar: Clear Western Knotty Inland Redwood Register Grills Rope Moulding S4S Hardwood Lumber S2S Kiln Dried Lumber Shipping Information... 3 Special Order... 5 Switch Plate Covers Veneer Wainscote Warranty... 2, 5, 8-9 Window Stools Work Bench Tops Wide Plank Flooring MOULDINGS Interior Doors Ash: Solid Blinds Cafe Doors Cherry: Solid Veneer Combination Doors Custom Doors , 67 Door Assembly/Construction Door Frame Assembly Door Handing Charts Door Hardware Door Specifications Hickory: Solid Etched Glass Doors Finished Opening Requirements Flush: Birch Oak Interior Replacement Doors Krosscore Maple: Solid Veneer Molded: Hollow Solid Pine: Veneer Poplar: Solid Veneer Pre-Finishing Options Pre-Hung Options Red Oak: Solid Veneer Schlage Locksets Shipping Information... 3 Shutters Sliding Pocket Hardware Special Order , 67 Storm & Screen Doors Walnut: Solid Warranty... 2, 56 White Oak: Solid Stair Parts Bending Mold Iron Balusters Shipping Information... 3 Carolina Series Over The Post: Shoe Rails Colonial Series Applications of a System Special Order Contemporary Stair Parts Climbing Volutes Specifications Fillet Connect-A-Kit Fittings Starting Steps Fluted Series Rail Fittings Treads, Risers & Rosettes Hampton Series Starting Fittings Twisted Series Handrails Upeasings, Caps, Quarterturns Wall Rails Handrail Brackets PermaCast Columns Warranty... 2, 101 Installation Hardware Pre-Finishing Options Wood Round Columns Installation Tools Primed Balusters FEB FAX info@bairdbrothers.com 1

4 POLICIES GENERAL WARRANTY 1. All items are stocked in Select Hardwoods. Natural color variation and mineral stains may occur. 2. Defects in material or workmanship must be reported upon receipt and prior to installation! Wood products must be maintained under stable temperature and humidity conditions to remain under warranty. Prompt and proper sealing and finishing is essential to maintain wood stability. 3. Replacement requests are subject to Baird Brothers Sawmill, Inc. inspection and approval. 4. Our liability shall not exceed the replacement cost of our product. LIMITED WARRANTY Baird Brothers Sawmill, Inc. products are warranted to be free from defects in material and workmanship for a limited period of 30 days from the date of shipment. If products are found to be defective by manufacturer, they will be exchanged or credited to the customer s account at his/her option. No merchandise shall be returned without approval of Baird Brothers Sawmill, Inc. Manufacturer shall not be responsible for the improper use or misuse of its products and no other warranties or responsibilities for safety or performance are either expressed or implied. A complete limited 30-day warranty statement is available to consumers in compliance with the Magnuson-Moss Warranty Act of NOTE: ALL OF BAIRD BROTHERS SAWMILL, INC. PRODUCTS INCLUDING MOULDINGS, FLOORING, DOORS, AND ARE FOR INTERIOR USE AND INSTALLATION ONLY. RETURN POLICY 1. Shipping charges are NOT refundable. The customer is responsible for shipping costs when receiving and returning the item(s). When returning items for credit, we recommend using a service such as FedEx or UPS so that the package(s) are traceable. 2. Prefinished products, special order items, custom products, and pre-hung door units are NOT returnable. 3. Return of products must be accompanied with a proof of purchase. No damaged, soiled, stained/finished, cut, or otherwise altered items will be accepted. 4. All returns are subject to a restocking/handling charge of 15%. Goods are NOT returnable after 60 days from the date of receiving material. TERMS OF SALE 1. Orders not on account must be paid in full when placed. 2. Special Orders require payment in full and are non-returnable. Please allow 2-3 weeks for completion of special orders.(special patterns may be over-run 10%) Additional shipping charges could apply on special orders. 3. Orders with 10 or more pieces the same length of a product are subject to an additional 15% for that item. 4. No Baird Brothers truck C.O.D. deliveries. 5. Do Not expose finish-grade wood products to rain/snow while loading or unloading. Water spots will show up after job-site finishing. 6. Do Not subject material to extremely high, low, or fluctuating humidity. Relative humidity of 20-60% is ideal. 7. Wet concrete, plaster, and drywall can transmit moisture to unfinished wood products. These can all cause swelling, joint separation, twisting, cupping, or warping of wood products. 8. Do Not expose unfinished wood products to excessive heat, dryness, or sudden temperature changes (such as firing up the furnace). These can all cause twisting, cupping, or warping as well. 9. Non-standard items are not subject to return or cancellation if purchasing and/or production have been initialized. 2 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

5 SHIPPING GROUND SHIPPING (small orders 8' and shorter in length) - FedEx Home Delivery, FedEx Ground (business addresses), FedEx Express Saver, UPS Ground, and UPS 3 Day Select orders normally ship in 1 to 2 business day. FedEx Overnight, FedEx 2 Day, UPS Next Day Air, and UPS 2nd Day Air orders will ship the same day if placed before 2:00 p.m. EST. - Shipping and handling charges are not refundable. All returns must be in resalable condition. BAIRD BROTHERS DELIVERY TRUCK (large orders or material over 8' in length within a 100 mile radius) - Our driver will not carry material into the house. - Material will be delivered to the garage only, and our driver must have safe and clear access to back box truck to the garage for unloading. - We recommend but do not require anyone to be at the job site to accept material, as long as the garage is unlocked and accessible. If the garage is locked, please give us the location of a key and/or lockbox combination so your material is not left outside or returned. - If the driveway was recently poured then we require someone to be there to carry the material from the street. - All material to be returned should be placed in the garage and labeled Baird Brothers return. We will not carry return materials out of the house. - NO C.O.D. deliveries COMMON CARRIER FREIGHT TRUCK (large orders or materials over 8' in length outside of our 100 mile radius) The following should be considered when receiving a Freight Delivery: - Truck drivers are subject to a number of regulations, one of which is that they are not required to give assistance unloading. Please be prepared for this curbside delivery, as you are responsible for unloading the item(s) and placing them in your shop or home. - Some terminals have other delivery services available, such as lift gate service, for an additional cost. These services vary from terminal to terminal, so remember to ask the trucking company when they call to make delivery arrangements. You are responsible for these additional costs. - SHIPPING DAMAGE: We have great service from the trucking companies we deal with, however, sometimes shipping damage can occur. It is extremely important to inspect and note any damage that might be suspect on the Bill of Lading (BOL) when signing for the shipment. Damage to the packaging container or material if it has become exposed should be noted on the form the driver gives you to sign accepting delivery. These notations will allow us to make a claim for shipping damage on your behalf. Failure to do so makes it extremely difficult to make a claim. If there is shipping damage and you have noted it on the delivery form, call us at , and we will help you get the problem resolved. - PRE-HUNG DOUBLE DOORS THAT ARE SHIPPED BY FREIGHT TRUCK ARE KNOCKED-DOWN PRIVACY POLICY Baird Brothers Sawmill, Inc. is committed to protecting your privacy and will not use unethical promotional methods. Customer data that is collected is used to contact the customer to resolve disputes, answer questions, subcrbire to our newsletter, or provide additional information that the customer originally requested from the company. Baird Brothers Sawmill, Inc. does not sell, or rent, its customer information to third parties. MOULDINGS FEB FAX info@bairdbrothers.com 3

6 P M F RE-FINiSHED OULDINGS, LOORING, D S P OORS, & TAIR ARTS CLEAR COAT - UV FINISH Hard Finish and Chemical Resistant For a NATURAL FINISH or choose from seven different stain colors. 1. GOLDEN 2. LIGHT CHERRY 3. EARLY AMERICAN 4. TRADITIONAL CHERRY 5. NUTMEG 6. DANISH 7. MAHOGANY NUMBER OF COATS APPLIED: 2 Heavy Coats on Flooring 2 Coats on Moulding 2 Coats on Doors 2 Coats on Stair Parts 2 WEEK LEAD TIME FOR PREFINISHED ORDERS 25 YEAR FLOORING FINISH BAIRD BROTHERS STAIN PRODUCTS STAIN COLOR GALLON QUART MARKER PUTTY JAR GOLDEN LIGHT CHERRY EARLY AMERICAN TRADITIONAL CHERRY NUTMEG DANISH MAHOGANY Baird Brothers flooring finish is a urethane based, roll-coated finish that has aluminum oxide and other scratch resistant additives, and is UV cured. Priming Pricing: Door Slab (Panel or Glass)... $ Louver Doors Cabinet Doors Mouldings up to 3-1/2"....20/ft. Mouldings 3-9/16" to 5-7/16"....25/ft. Mouldings over 5-1/2" to 8"....30/ft. Mouldings over 8-1/16", up to 11-1/2"...40/ft. Balusters Newel Posts Plinth Block PRIMING Information on Primer Used: Solvent Based Water or Oil-Based Finish Coat is Okay 6 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

7 P RE-FINiSHED P RICE L IST MOULDINGS,, & FLOORING STAIN & CLEAR CLEAR COAT FINISH MOULDINGS & S4S UP TO 3-1/2".50 PER FT..40 PER FT. MOULDINGS & S4S 3-9/16" TO 5-7/16".60 PER FT..50 PER FT. MOULDINGS & S4S 5-1/2" TO 8".70 PER FT..60 PER FT. MOULDINGS & S4S 8-1/16" TO 11-1/2".90 PER FT..75 PER FT. HANDRAIL, BAR TOP RAIL, DOWEL ROD, & ROPE MOULDING 1.50 PER FT PER FT. STAIR TREADS (WITH RETURN, ADD $5.00 PER RETURN) 2.25 PER FT PER FT. STARTING TREAD KIT (TREAD, RISER, SHOE, & COVE) EA EA. BALUSTERS 4.50 EA EA. OCTAGONAL, TWISTED, & FLUTED BALUSTERS 6.25 EA EA. NEWEL POSTS 7.50 EA EA. OCTAGONAL, TWISTED, & FLUTED NEWEL POSTS EA EA. BOX NEWEL EA EA. FLUTED & RAISED PANEL BOX NEWEL EA EA. FLOORING (END MATCHED) 1.75 PER SQ. FT PER SQ. FT. FLOORING (8' FINGER-JOINTED) 1.50 PER SQ. FT PER SQ. FT. DOORS 25 YEAR FLOORING FINISH RAISED PANEL - SLAB EA EA. RAISED PANEL - SINGLE PRE-HUNG EA EA. RAISED PANEL - DOUBLE PRE-HUNG EA EA. RAISED PANEL - BIFOLD (2' TO 3') EA EA. RAISED PANEL - BIFOLD (4' TO 6') EA EA. LOUVER - SLAB EA EA. LOUVER - SINGLE PRE-HUNG EA EA. LOUVER - DOUBLE PRE-HUNG EA EA. LOUVER - BIFOLD (2' TO 3') EA EA. LOUVER - BIFOLD (4' TO 6') EA EA. FLUSH - SLAB EA EA. FLUSH - SINGLE PRE-HUNG EA EA. FLUSH - DOUBLE PRE-HUNG EA EA. FLUSH - BIFOLD (2' TO 3') EA EA. FLUSH - BIFOLD (4' TO 6') EA EA. GLASS - SLAB EA EA. GLASS - SINGLE PRE-HUNG EA EA. GLASS - DOUBLE PRE-HUNG EA EA. MISC. ITEMS PLYWOOD PER SIDE PER SIDE PLINTH & BASE BLOCKS, ROSETTES, & NEWEL DROPS 2.25 EA EA. CROWN BLOCKS, MANTLE BRACKETS, & CORNER GUARDS EA EA. REGISTER GRILLS EA EA. SWITCH PLATE COVERS 2.25 EA EA. CABINET DOORS EA EA. DRAWER FRONTS EA EA. CIRCLE TOP CASINGS EA EA. MANTLES EA EA. MOULDINGS 7' TALL DOORS: ADD $20.00 TO 6/8 PRICE 8' TALL DOORS: DOUBLE THE 6/8 PRICE SQUARE STICKING/FLAT PANEL DOORS: ADD $25.00 TO RAISED PANEL PRICE Choose from seven stain colors or clear coat finish. *Satin finish available upon request, 25% upcharge. Prices Are Subject To Change Without Notice. NO Warranty on Satin Flooring Finish. FEB FAX info@bairdbrothers.com 7

8 RESIDENTIAL PREFINISHED PRODUCT LIMITED WARRANTY A. WARRANTY AGAINST MANUFACTURING/GRADE DEFECTS We warrant to the original purchaser of our Prefinished Hardwood Floors purchased after September 1, 2006 against any defects caused during manufacturing. This warranty includes manufacturing defects caused during milling, grading, staining and finish coating. Our flooring is manufactured in accordance with accepted industry standards, which permit a grade/manufacturing defect tolerance not to exceed 5%. It is the responsibility of the installer/homeowner to inspect each plank prior to installation to identify manufacturing or grade defects. Once a board has been installed, it is deemed to have been accepted, and all claims based on manufacturing or grade defects are waived. Should an individual board be in question as to grade, manufacture or finish, and if the installer is not able to relocate it unseen or cut off the defective portion, the installer should not use that board. If he/she does, our liability is limited to replacement of defective material only in excess of 5% (excluding the cutting allowance). Natural wood characteristics, such as knots, cracks, color variation, etc. are considered normal grade characteristics and are not considered defects. Minor variations in plank thickness do occur and are normal between planks, and are not considered defects. We do not warrant against minor differences between color samples and the color of installed floors. B. WARRANTY AGAINST FINISH WEAR-THROUGH We warrant to the original purchaser of our Prefinished Hardwood Floors that the surface finish UV coated urethane will not wear through for a full 25 years from the date of purchase, when used under normal residential traffic conditions and use, and as long as you follow all the preventative and regular maintenance instructions provided with your product. This warranty does not cover indentations, scratches and naturally occurring wood fiber discoloration. This warranty does not cover damages caused by spills, accidents, negligence, misuse, abuse, water, sand or other extreme environmental conditions. Gloss reduction or loss of sheen are not considered wear through and are not covered under the prefinished product warranty. Discoloration due to exposure to sunlight or other environmental conditions is not considered wear through, and is not covered by our warranty. This warranty does not cover any damage that results from the accidental or intentional penetration of the finish. Nor does the warranty cover damage caused by shoes in need of repair, sports equipment, furniture, cleaning equipment, sudden impact by hard objects, pet claws, use of abrasive cleaners, or abrasion by any object such as sand or pebbles. Scratches that appear after installation are considered to be normal wear. Sanding or screening the finish will void this warranty. This warranty does not cover damage caused by moisture penetration, flooding, leaky plumbing, overflowed tubs or sinks, washing machines, dishwashers, or any similar damage. Caring for your Prefinished Hardwood Floor. Abrasive products, natural or manmade, will damage your floor. Dry mop your floor regularly to remove loose dirt or before it can scratch your floor. Wipe up spills as quickly as possible. Never wet mop your hardwood floor. Use non-abrasive cleaners that do not contain oils, waxes or phosphates. Your hardwood dealer or installer can suggest products available in your local area. Protective pads should be used between the bottom of furniture and the floor. Entry mats at doorways should be used to catch dirt before being tracked on the floor. Radiant Heat Systems. Installation over radiant heat will void this warranty. C. GENERAL INFORMATION The limited warranties described above apply only to our Prefinished Hardwood Floor products and are given to the original residential purchaser only. These warranties do not extend to commercial purchasers or commercial uses. These warranties are not transferable. TRANSPORTATION AND STORAGE: The product must be transported and stored in a dry environment. No exposure to moisture of any type should be permitted. Do not store on concrete surfaces. INSTALLATION: This warranty is void if a sub-floor other than 5/8" thick or greater performance rated plywood, or 3/4" thick or greater performance rated OSB is used. NOFMA approved staples or nails must be used and placed not more than 5" on center. Prior to installation, the owner/installer must determine that the job site and all sub-surfaces meet all requirements specified in the installation instructions. Your installer should follow the installation guidelines set forth by N.O.F.M.A. and the N.W.F.A. These are industry standards and are available by calling These standards include, but are not limited to: moisture content must be tested on both the product and subfloor prior to installation. The use of touch-up pen or filler stick for correction during installation should be accepted as normal procedure. When our Prefinished Hardwood 8 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

9 Floor is ordered, not less than 5% must be added to the actual square footage needed as allowance for cutting waste. We disclaim all responsibility for judgment errors and/or for poor installation quality of its product. We will not pay any installation or labor costs. INFESTATION: This warranty does not cover damage due to insect infestation after the product has left the factory. D. CLAIM PROCEDURE To file a claim, the original residential purchaser should first contact Baird Brothers Sawmill, Inc. ( Manufacturer ). Claims must be filed within the warranty coverage period, and your purchase receipt, verifying date of purchase, and purchase price will be required. We reserve the right to have our designated representative inspect the floors and remove samples for technical analysis. EXCLUSIVE REMEDIES: If any portion of our Prefinished Hardwood Floors should fail with respect to the warranty of manufacturing/grade defect we will replace the defective boards at our sole cost and expense. If any portion of our Prefinished Hardwood Floors should fail with respect to the warranty of wear-through, we will, at our sole option, within a reasonable time of receipt of actual notice and verification of your claim, repair, replace or refinish that only portion of the floor which has failed to perform consistently within the terms of this limited warranty, with the same product or another product of equal value, or will refund the purchase price of the affected portion of prefinished product. THIS IS THE SOLE AND EXCLUSIVE REMEDY TO THE PURCHASER AND SOLE OBLIGATION AND LIABILITY OF THE MANUFACTURER. MANUFACTURER HEREBY EXCLUDES AND WILL NOT PAY ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. MANUFACTURER ASSUMES NO LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION MAY NOT APPLY TO YOU. MOULDINGS E. WARRANTY DISCLAIMERS AND EXCLUSIONS PREFINISHED PRODUCT WARRANTIES EXCLUSIONS: OUR LIMITED WARRANTIES DO NOT COVER WEAR THROUGH RESULTING FROM FAILURE TO FOLLOW ALL MANUFACTURER S SPECIFIC WRITTEN INSPECTION, INSTALLATION, OR MAINTENANCE INSTRUCTIONS, IMPROPER MAINTENANCE, INSUFFICIENT PROTECTION, MISUSE OR IMPROPER ALTERATIONS OF THE ORIGINAL MANUFACTURED PRODUCT, INDENTATIONS, SCRATCHES OR DAMAGE, INCLUDING, BUT NOT LIMITED TO, STAINS CAUSED BY MISUSE, ABNORMAL USE, NEGLIGENCE, VACUUM CLEANERS AND OTHER MECHANICAL CLEANING EQUIPMENT, NEGLIGENCE, FIRE, WATER, LIGHT EXPOSURE, MOISTURE, EXCESSIVE HEAT OR EXCESSIVE DRYNESS, SHAKE DUE TO ALTERATION OF PRODUCT OR DUE TO HUMIDITY, EROSION, PEBBLES, SAND, DIRT OR OTHER ABRASIVES, PETS, INSECTS, SPIKED HEEL SHOES, WEATHER CONDITIONS OR NATURAL DISASTERS. COLOR VARIATIONS, NATURALLY OCCURRING WOOD CHARACTERISTICS, WATER AND/OR MOISTURE, INCLUDING, BUT NOT LIMITED TO DAMAGE RESULTING FROM BROKEN OR LEAKY PIPES, WET MOPPING, OR WEATHER CONDITIONS OR NATURAL DISASTERS OR INSUFFICIENT PROTECTION. OUR WARRANTIES DO NOT COVER NATURAL EXPANSION AND CONTRACTION RESULTING IN SEPARATION BETWEEN BOARDS, OR DAMAGE CAUSED BY HUMIDITY OR SUNLIGHT. THE MANUFACTURER EXCLUDES ALL WARRANTIES IMPLIED BY LAW OR IMPLIED BY FACT WHICH ARE NOT EXPRESSLY SET FORTH ON THE FACE OF THIS DOCUMENT. IF ANY IMPLIED WARRANTY ARISES UNDER STATE LAW, ANY SUCH IMPLIED WARRANTY IS LIMITED IN DURATION FOR THE PERIOD OF THIS WRITTEN WARRANTY, TO THE EXTENT ALLOWED BY LAW. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE MANUFACTURER EXCLUDES AND WILL NOT PAY ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO THE EXTENT PROVIDED BY LAW. WE ASSUME NO LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. HOWEVER, SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. THIS WRITING IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE EXPRESS WARRANTIES PROVIDED HEREIN AND IS IN LIEU OF ALL OTHER EXPRESS AND/OR STATUTORY WARRANTIES BY THE MANUFACTURER. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE EXCEPT THE EXPRESS WARRANTIES ON THE FACE OF THIS DOCUMENT. FEB FAX info@bairdbrothers.com 9

10 INTERIOR DOOR WARRANTY 1. One year limited warranty on manufacturing defects. 2. Baird Brothers Sawmill, Inc. responsibility under this warranty is limited to repairing or at our option replacing any product found to be defective due to manufacturing or material defects. 3. Baird Brothers Sawmill, Inc. liability shall not exceed the replacement cost of our product. WE WILL NOT PAY FOR LABOR OR FINISHING CHARGES TO REPLACE ANY PRODUCT THAT IS DEFECTIVE. 4. Natural variations in the wood color or grain pattern are not considered defects. 5. Doors must be sealed all SIX sides or any warranty claims will be voided. 6. Alteration of the Door in any way (Cutting the top or sides down) Voids any warranty. 7. Door slabs should be stored flat and sealed as soon as possible. 8. Panel shrinkage is normal and is not a defect. 9. Baird Brothers doors are INTERIOR and should NOT be use in any exterior application. 10. Warpage problems usually are due to the conditions in the home and a heating and cooling season will eliminate them. If high humidity is present you will need to run a dehumidifier. 11. Warpage of 1/4" or less across any plane is an industry standard and is not considered a defect. 12. We reserve the right to change prices and make design modifications without notice. IMPORTANT NOTICES - PRE-HUNG DOUBLE DOORS THAT ARE SHIPPED BY COMMON CARRIER FREIGHT TRUCK ARE KNOCKED-DOWN - Any door that is reduced in height or width or reduced in height or width in the field voids all manufacturers warranties regardless of how the finish is applied and cannot be returned for credit. CARE AND FINISHING INSTRUCTIONS FOR & PRE-HUNG UNITS 1. Doors must be transported in a clean vehicle and under cover in wet weather. FAILURE TO COMPLY WILL VOID THE MANUFACTURER S WARRANTY AND THE DOOR CANNOT BE RETURNED FOR CREDIT. 2. Deliver door(s) to building site after plaster or cement is dry. 3. Handle all doors with clean gloves and equipment. 4. Avoid dragging doors across one another or across other surfaces. 5. Store flat on a level surface in a dry, well-ventilated area; avoid stacking on end. (Door slabs only.) 6. Cover doors to keep clean; allow air circulation. 7. Avoid subjecting doors to abnormal heat, extreme dryness, humid conditions or sudden changes in climate. They should be conditioned to average prevailing relative humidity of the locality prior to hanging. 8. If doors are to be stored on the job site for more than a week; the entire door including the top and bottom edges, must be sealed. 9. Pre-hung doors should be stored standing up, but raised off any concrete floor, cover and seal... same as above. 10. Surface should be clean and dry. All doors are mill-finished and require finish sanding at job site. 11. Clean doors thoroughly after sanding to remove all dust or foreign material. (Small amounts of grease or oil can be wiped clean with mineral spirits.) 12. Make sure all surfaces are sealed and finished, including the top, bottom and side edges of stiles and rails. Incomplete finishing will increase the probability of warpage or twisting. From all of us at Baird Brothers Sawmill, Inc., thank you for your business. POLICIES AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE 56 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

11 B AIRD B ROTHERS S OLID H ARDWOOD 3-3/4" (face) Top 3-1/2" (face) Upper Cross DOOR ASSEMBLY 1/2" Dowel Pins Rubber Space Balls 5-Piece Engineered Hardwood Door Stiles 4" (face) MOULDINGS 3-1/2" (face) Upright 5/8" Hardwood Panel 6-1/2" (face) Lock 8-1/4" (face) Bottom 1/2" Dowel Pins SPECIES SOLID CLEAR THROUGH FEB FAX info@bairdbrothers.com 57

12 SPECIAL ORDER DOOR DESIGNS BB1000 BB1010 BB1030 BB1050 BB2000 BB2010 BB2020 BB2030 (Continental) BB2040 (Classique) BB2050 BB2070 BB2090 BB2130 BB2200 BB3000 BB3020 BB3030 BB3050 BB3060 BB3070 BB3080 BB3090 BB3110 BB3120 BB3130 BB3150 BB3180 BB3190 BB3210 BB3240 BB3260 BB3300 BB4000 (Trad. 4-Panel) BB4010 (Provincial) BB4040 BB4050 BB4070 BB4100 BB4120 BB4200 All doors available Shaker Style - with square sticking and Flat panel. Glass can be substituted for any wood panel. CALL FOR PRICING & LEAD TIME. 58 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

13 BB5000 BB5010 BB5050 BB5060 BB6000 (Trad. 6-Panel) BB6020 BB6050 BB6080 BB8000 BB103 BB1021 BB1022 BB1024 BB1052 BB3051 BB3052 BB6052 BB9021 BB9022 BB9024 BB401 BB403 BB501 BB503 BB601 BB601 BB606 BB603 BB801 BB803 BB1003 BB1201 BB1203 BB1501 BB1503 BB1509 BB1510 BB1515 BB1801 BB1803 (9-Lite Prairie) (10-Lite) (15-Lite) All doors available Shaker Style - with square sticking and Flat panel. Glass can be substituted for any wood panel. CALL FOR PRICING & LEAD TIME. FEB FAX info@bairdbrothers.com 59

14 DOOR OPTIONS Sticking Profile Options Panel Profile Options DP100 DS100 DS122 DS102 DS124 DP102 DP110 DS104 DS128 DS110 DS130 DP " DP Door Panel Thickness Option adders: 3/4" thick Raised $ " thick Raised /2" thick Raised Door Slab Option adders: Custom Size Slab $25.00 (if 6-Panel, add to 4-Panel prices) 60 Clipped Corner Arched Top Full Radius Top Dutch Door Pre-Hung Option adders: No Shelf or Hardware $ With Shelf Only With Shelf & Flush Bolt Custom Door Option adders: SLAB PRE-HUNG ( SINGLE DOOR) Clipped $ over 4-Panel $ Arch over Continental arched jamb & stop Full Radius over Continental full radius jamb & stop V-Grooved or Beaded Panels (3/4"T) over Continental N/A Commercial / ADA compliant door add w/ 2-3/4" backset, No Upcharge BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

15 Pre-Hung Doors ADD THE FOLLOWING TO 6/8 SLAB PRICES: Includes: Door Jamb, B502 Stop, 3-1/2" Hinges w/ Choice of Color, & Machining SINGLE DOOR DOUBLE DOOR UNIT 4-5/8" F/J Primed Poplar Jambs $27.00 $ /8" Red Oak Veneer Jambs /8" Pine Veneer Jambs /8" Solid Red Oak Jambs /8" Solid Poplar Jambs /8" Solid Hard Maple Jambs, Hickory, or White Oak /8" Solid Cherry Jambs /8" Solid Walnut Jambs /8" Solid Ash Jambs OPTIONS: Add 4-7/8" or 5-1/4" Jambs (any solid wood jambs) Add $25.00 for 7' Single Pre-Hung Doors; Add $35.00 for 8' Single Pre-Hung Doors Add an additional $20.00 per door to machine for square corner hinges Add $10.00 per Pre-Hung unit for Square Door Stop DOUBLE DOOR UNITS: Add $25.00 for Ball Catches; Add $50.00 for 6/8 & 7/0 T-Astragal and Flush Bolt, $ for 8/0 w/ Long Bolt PLEASE NOTE: F/J Primed Poplar, Red Oak Veneer and Pine Jambs other than 4-5/8". Please choose Solid Poplar or Red Oak. Custom Jamb Width Adders to std. 4-5/8 Pre-Hung Pricing Poplar $10.00 $15.00 $20.00 $40.00 $55.00 Red Oak, Ash, or Ponderosa Pine Hard Maple, Hickory, White Oak, Birch, Knotty Alder, or Eastern White Pine Cherry, African Mahogany, or Clear Western Red Cedar Walnut Qtr. Sawn Red Oak Qtr. Sawn White Oak Genuine Mahogany Options for Pre-Hung and Slabs REDUCING OPTIONS MACHING OPTIONS Reduce* Height - Slab Reduce* Height - Pre-Hung $ Machine Door Only for Knob & Hinges (Our Standard) Reduce* Width 25.00/Door Machine Door Only for Knob & Hinges (Special - Other Than Our Standard) *Note: Reducing Door Size Voids Warranty Machine for Deadbolt (5-1/2" O.C. bores) $ MOULDINGS 6/8 Assembled Casing Sets for Pre-Hungs SETS NOT APPLIED SETS APPLIED Red Oak Poplar Primed 1 Side Applied 1 Side Loose Red Oak Poplar Primed B100 Per 2 Door Sides $33.00 $27.00 $28.00 B100 Per 2 Door Sides $38.00 $32.00 $33.00 B102 Per 2 Door Sides B102 Per 2 Door Sides B104 Per 2 Door Sides B104 Per 2 Door Sides B108 Per 2 Door Sides B108 Per 2 Door Sides B112 Per 2 Door Sides B112 Per 2 Door Sides Prices Are Subject To Change Without Notice FEB FAX info@bairdbrothers.com 61

16 HOLLOW MOLDED DOORS 1-3/8" (SLAB) WIDTH x HEIGHT (Feet / Inches) COLONIST ARLINGTON CONTINENTAL COVENTRY PROVINCIAL CLASSSIQUE ATHERTON CAMBRIDGE PRINCETON SANTA FE 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Colonist, and Arlington Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, and 1/8 Provincial, Atherton, and Coventry Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. Pre-hung on 4-5/8" F/J Primed Poplar Jambs, add: Single Door: $27.00 Double Door: $54.00 See page 61 for additional pre-hung pricing. SEE PAGE 86 FOR HANDING CHART 62 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

17 SOLID MOLDED DOORS 1-3/8" (SLAB) WIDTH x HEIGHT (Feet / Inches) ARLINGTON CONTINENTAL COLONIAL CAMBRIDGE ATHERTON PRINCETON SANTA FE PRIMED 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Colonist and Arlington Doors have 3 Panels. *1/6 Atherton Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" F/J Primed Poplar Jambs, add: Single Door: $27.00 Double Door: $54.00 See page 61 for additional pre-hung pricing. FEB FAX info@bairdbrothers.com 63

18 64 FLUSH DOORS (SLAB) BIRCH LOUVER & LITE KITS AVAILABLE* RED OAK WIDTH x HEIGHT (Feet / Inches) HOLLOW 1-3/8" SOLID 1-3/8" SOLID 1-3/4" HOLLOW 1-3/8" SOLID 1-3/8" SOLID 1-3/4" 1/0 x 6/ /2 x 6/ /3 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ Pre-Hung on 4-5/8" Pre-hung on 4-5/8" Pre-hung on 4-5/8" Pre-hung on 4-5/8" F/J Primed Poplar Jambs, add: Solid Poplar Jambs, add: Red Oak Veneer Jambs, add: Solid Red Oak Jambs, add: Single Door: $27.00 Single Door: $35.00 Single Door: $30.00 Single Door: $50.00 Double Door: $54.00 Double Door: $70.00 Double Door: $60.00 Double Door: $ Please check lead time for all special orders. Prices subject to change without notice. Maple and oak door edges are available special order. *Call for price of your required size louver or lite kit, installation is $ See page 61 for additional pre-hung pricing. SEE PAGE 86 FOR HANDING CHART BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

19 KROSSCORE 2-PANEL ARCH HC VENEER DOORS WIDTH x HEIGHT (Feet / Inches) CHERRY MAPLE WALNUT 1/0 x 6/ * /2 x 6/ * /4 x 6/ * /6 x 6/ /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ * /0 x 6/ CARTON BIFOLDS 2 DOOR CHERRY MAPLE WALNUT 2/0 x 6/ /6 x 6/ /0 x 6/ FEB FAX info@bairdbrothers.com 65

20 WIDTH x HEIGHT (Feet / Inches) PINE VENEER DOORS 1-3/8" (SLAB) VENEER 6-PANEL VENEER 4-PANEL SOLID HALF LOUVER SOLID FULL LOUVER VENEER 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. Pre-hung on 4-5/8" Pine Veneer Jambs, add: Single Door: $35.00 Single Door: $30.00 Double Door: $70.00 Double Door: $60.00 Pre-hung on 4-5/8" Solid Red Oak Jambs, add: See page 61 for additional pre-hung pricing. Single Door: $50.00 Double Door: $ Pre-hung on 4-5/8" Red Oak Veneer Jambs, add: SEE PAGE 86 FOR HANDING CHART 66 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

21 Interior Hardwood CUSTOM DOORS AVAILABLE MOULDINGS Baird Brothers specializes in producing custom interior hardwood doors to match a historical renovation or for a new elegant home. Available in paint grade, stain grade, or prefinished with wood panels, glass panes, or a combination of both. Your doors can be made from many different species, including but not limited to the following: Poplar, Red or White Oak, Maple, Birch, Cherry, Walnut, Ash, Hickory, Quartersawn Red or White Oak, Mahogany, Spanish Cedar, Alder, and Brazilian Cherry. To build the doors you are searching for, we can start from a rough sketch, a photo, or an architectural drawing. Just tell us what you want, and we will make your dreams come to reality. Whether it be one door or a house full, Baird Brothers is your source for custom interior hardwood doors. Available 1-3/8" & 1-3/4" in sizes up to 3/0 x 8/ BairdBrothers.com Custom veneer doors are also available, please call for more information. FEB FAX info@bairdbrothers.com 67

22 68 WIDTH x HEIGHT (Feet / Inches) SOLID RED OAK DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Also available in Quartersawn. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Red Oak Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass

23 WIDTH x HEIGHT (Feet / Inches) RED OAK VENEER DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART THESE DOORS ARE SPECIAL ORDER NON STOCK Pre-hung on 4-5/8" Red Oak Veneer Jambs, add: Single Door: $28.00 Single Door: $45.00 Double Door: $56.00 Double Door: $90.00 See page 61 for additional pre-hung pricing. Pre-hung on 4-5/8" Solid Red Oak Jambs, add: FEB FAX info@bairdbrothers.com 69

24 WIDTH x HEIGHT (Feet / Inches) SOLID POPLAR DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Poplar Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

25 WIDTH x HEIGHT (Feet / Inches) *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART POPLAR VENEER DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL Pre-hung on 4-5/8" Solid Poplar Jambs, add: Single Door: $35.00 Double Door: $70.00 See page 61 for additional pre-hung pricing. 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK FEB FAX info@bairdbrothers.com 71

26 72 WIDTH x HEIGHT (Feet / Inches) SOLID HARD MAPLE DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Hard Maple Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass

27 WIDTH x HEIGHT (Feet / Inches) *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. HARD MAPLE VENEER DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL Pre-hung on 4-5/8" Solid Hard Maple Jambs, add: Single Door: $65.00 Double Door: $ See page 61 for additional pre-hung pricing. 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK SEE PAGE 86 FOR HANDING CHART FEB FAX info@bairdbrothers.com 73

28 WIDTH x HEIGHT (Feet / Inches) SOLID CHERRY DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Cherry Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

29 WIDTH x HEIGHT (Feet / Inches) *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. CHERRY VENEER DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL Pre-hung on 4-5/8" Solid Cherry Jambs, add: Single Door: $75.00 Double Door: $ See page 61 for additional pre-hung pricing. 10-LITE / 15-LITE TRUE DIVIDED 1/0 x 6/8* /2 x 6/8* /3 x 6/8* /4 x 6/8* /6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ THESE DOORS ARE SPECIAL ORDER NON STOCK SEE PAGE 86 FOR HANDING CHART FEB FAX info@bairdbrothers.com 75

30 WIDTH x HEIGHT (Feet / Inches) SOLID HICKORY OR WHITE OAK DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Hickory or White Oak Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

31 WIDTH x HEIGHT (Feet / Inches) SOLID ASH DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER FEB FAX info@bairdbrothers.com LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Ash Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass

32 WIDTH x HEIGHT (Feet / Inches) SOLID WALNUT DOORS 1-3/8" (SLAB) 6-PANEL 4-PANEL CONTINENTAL PROVINCIAL CLASSIQUE HALF OR FULL LOUVER 1-LITE 5-LITE* / 10-LITE / 15-LITE TRUE DIVIDED 9-LITE PRAIRIE 1/0 x 6/8* * - 1/2 x 6/8* * - 1/3 x 6/8* * - 1/4 x 6/8* * - 1/6 x 6/8* /8 x 6/8* /10 x 6/8* /0 x 6/ /2 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /10 x 6/ /0 x 6/ BIFOLDS - 2 DOOR 2/0 x 6/ /4 x 6/ /6 x 6/ /8 x 6/ /0 x 6/ BIFOLDS - 4 DOOR 4/0 x 6/ /0 x 6/ /0 x 6/ DOUBLE DOOR UNITS (Add $25 for Ball Catches or $50 for T-Astragal and Flush Bolt) 2/0 x 6/ * - 2/4 x 6/ * - 2/6 x 6/ * - 2/8 x 6/ * - 3/0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ /4 x 6/ /8 x 6/ /0 x 6/ *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 6-Panel Doors have 3 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 4-Panel Doors have 2 Panels. *1/0, 1/2, 1/3, 1/4, 1/6, 1/8, and 1/10 Provincials Doors have 2 Panels. Please check lead time for all special orders. Prices subject to change without notice. SEE PAGE 86 FOR HANDING CHART Pre-Hung on 4-5/8" Solid Walnut Jambs, add: See page 61 for additional pre-hung pricing. Slab Options, add: Single Door $ /4" Thick $50.00 Double Door '0" Doors Lite Options, add: 8'0" Doors Satin White Laminate V-Groove 5/10/15-Lite Options, add: 2/0 x 6/8 Doors $ $ $ /6 x 6/8 Doors /0 x 6/8 Doors $15.00/Lite for Clear Beveled, Satin or White Laminate Glass BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

33 CUSTOM ETCHED GLASS Interior Door MOULDINGS Zapfino font POSSIBILITIES TIMES NEW ROMAN font Standard Etched Glass Designs (shown): add $250 - Custom designs also available. Times New Roman, Italic font Please specify font, clear or frosted background, if design is to be read from hinge or stop side, and if the texture is to be opposite the side the lettering is read from. Edwardian Script font FEB FAX info@bairdbrothers.com 79

34 D OOR H ARDWARE Hinges Applied Options Prices for all Colors - Bright Brass, Antique Brass, Antique Nickel, Satin Nickel, Bright Chrome, Oil Rubbed/Aged Bronze 3-1/2" (5/8" Radius Corner) 4" (5/8" Radius Corner) 4-1/2" (5/8" Radius Corner) Residential Std. Ball Bearing $7.00 ea. Ball Bearing $8.00 ea. 3-1/2" (Square Corner) + $20/door machining 4" (Square Corner) + $20/door machining 4-1/2" (Square Corner) + $20/door machining Residential Optional Ball Bearing $7.00 ea. Ball Bearing $8.00 ea. Bypass Door Hardware & Track JOHNSON LIGHT-DUTY HARDWARE (HOLLOW CORE DOORS) MAX WEIGHT 50# PER DOOR PANEL 4'0" $9.20 5'0" '0" JOHNSON HEAVY-DUTY HARDWARE (SOLID CORE DOORS) MAX WEIGHT 125# PER DOOR PANEL 4'0" $ '0" '0" '0" Bifold Door Hardware & Track JOHNSON LIGHT-DUTY HARDWARE (HOLLOW CORE DOORS) MAX WEIGHT 40# PER DOOR PANEL 2'0" $5.25 4'0" $ '6" '0" '0" '0" JOHNSON HEAVY-DUTY HARDWARE (SOLID CORE DOORS) MAX WEIGHT 50# PER DOOR PANEL 2'0" $ '0" $ '6" '0" '0" '0" S LIDING P OCKET H ARDWARE Sliding Pocket Doors #1500 Space Saver Pocket Doors Frame $59.00 PRODUCT CODE # Features: Carton Packaged - Easy Storage and Handling K.D. Steel-Reinforced Frame Universal Size - 2'0 through 3'0 x 6'8" For Doors 1-1/8" to 1-3/4" (max. wt. 125 lbs.) Jump-Proof Track with Key Hole Slots for Easy Removal Balanced Tricycle Hangers Enable Doors to Open and Close Smoothly Includes: Complete Installation Instructions Steel Encased Frame Jump-Proof Track 2 Tricycle Hangers 2 Door Guides Door Bumper Adjustment Wrench DOOR SIZE ROUGH OPENING 2'0" x 6'8" 49" x 84-1/2" 2'4" x 6'8" 57" x 84-1/2" Tricycle Hanger Jump-Proof Track 2'6" x 6'8" 61" x 84-1/2" 2'8" x 6'8" 65" x 84-1/2" 3'0" x 6'8" 73" x 84-1/2" 80 Prices Are Subject To Change Without Notice BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

35 D OOR H ARDWARE C ONT. MOULDINGS IVES SOLID DOOR STOPS DESCRIPTION NUMBER PRICE Solid Bright Brass 61MB3 $4.51 Antique Brass 61A Oil Rubbed Bronze 61A10B 1.23 Solid Satin Nickel 61MB Solid Antique Pewter 61MB15A 5.59 Satin Chrome 60A IVES SPRING DOOR STOPS DESCRIPTION NUMBER PRICE Bright Brass 060F3 $.66 Antique Brass 060F5.69 Bright Nickel 060F14.84 IVES HINGE PIN DOOR STOPS 'DOOR SAVERS' (HOLLOW CORE DOORS) HINGE PIN DOOR STOPS DESCRIPTION NUMBER PRICE Satin Nickel 72Z619E $1.62 Oil Rubbed Bronze 72Z613E 1.62 DESCRIPTION NUMBER PRICE Bright Brass 70A3 $1.26 Antique Brass 70A Dull Chrome 70A Solid Antique Pewter 70B15A 8.47 Solid Satin Nickel 70B Oil Rubbed Bronze 70A10B 1.57 Satin Chrome 70A SOLID BRASS SLIDING POCKET DOOR PULLS PASSAGE PRIVACY DESCRIPTION NUMBER PRICE NUMBER PRICE Oil Rubbed Bronze 990B716 $ B716 $9.57 Satin Nickel 990B B Bright Brass 990B B Antique Brass CP990B CP991B SOLID BRASS BYPASS DOOR FLUSH PULLS ROUND (2-1/8" bore) OBLONG DESCRIPTION NUMBER PRICE NUMBER PRICE Bright Brass 221B3 $ B3 $1.53 Satin Nickel 221B B26D 2.26 Prices Are Subject To Change Without Notice FEB FAX info@bairdbrothers.com 81

36 D OOR H ARDWARE C ONT. Max Grade Locksets WATSON KNOB X 3 Passage...# $ Privacy...# Entry...# Dummy...# WATSON KNOB X 15 Passage...# $11.00 Privacy...# Entry...# Dummy...# =Bright Brass 15=Satin Nickel Schlage Locksets GEORGIAN 605 Passage...# $15.90 Privacy...# Entry(505)...# Dummy...# GEORGIAN 609 Passage...# $17.75 Privacy...# Entry...# Dummy...# GEORGIAN 620 Passage...# $19.40 Privacy...# Entry...# Dummy...# FLAIR 605 LH/RH Passage...# $25.50 Privacy...# Entry(505)..#71602(2/3) Dummy...#71600(5/6) FLA Entry(505)..# LONDON LEVER X 3 LH/RH Passage..#101(1/2)00... $15.50 Privacy...#111(1/2) Entry...#121(1/2) Dummy...#131(1/2) LONDON LEVER X 15 LH/RH Passage...#101(7/8)00... $16.50 Privacy... #111(7/8) Entry...#121(7/8) Dummy...#131(7/8) ACCENT 619 LH/RH Passage...# $29.40 Privacy...# Entry...# Dummy...#71900(6/7) ACCENT 620 LH/RH Passage...# $29.40 Privacy...# Entry...# Dummy...#71901(6/7) ACCENT 716 LH/RH Passage...# $29.40 Privacy...# Entry...# Dummy #71703(8/9) HOLMES HANDLE SET X 3 LH/RH Watson Inside Trim...# $80.00 London Inside Trim.#172(1/2) HOLMES HANDLE SET X 15 LH/RH Watson Inside Trim...# $87.50 London Inside Trim.#172(7/8) SINGLE CYLINDER DEADBOLTS X 3...# $14.00 X 15...# SINGLE CYLINDER DEADBOLTS # $ # # # # # ENTRANCE GRIP HANDLE SETS LH/RH PLY/PLY # $ PLY/GEO # PLY/FLA #71700(8/9) PLY/GEO # PLY/ACC 619..#71701(3/4) PLY/ACC 620..#71701(5/6) PLY/GEO # PLY/PLY # PLY/PLY # PLY/ACC 716..#71702(8/9) PLYMOUTH 605 Passage...# $16.00 Privacy...# Entry(505)...# Dummy...# PLYMOUTH 626 Passage...# $18.85 Privacy...# Entry...# Dummy...# KNOBS LEVERS PLYMOUTH 716 Passage...# $18.85 Privacy...# Entry...# Dummy...# HANDLESETS DEADBOLTS =Bright Brass Lifetime Finish 605=Bright Brass 609=Antique Brass 619=Satin Nickel 620=Antique Pewter 626=Satin Chrome 716=Aged Bronze Other styles and Finishes available special order. Case quantities available. (Call for pricing) Prices subject to change without notice. Prices Are Subject To Change Without Notice BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

37 I NTERIOR R EPLACEMENT D OORS USE YOUR EXISTING JAMBS, HINGES, DOOR STOP AND CASING. No Mess and Easy To Do!!! MOULDINGS Make all measurements from the top of the door down! 1. Take your exising door and measure from the top of the door to the top of the first hinge location and then from the top of the door to the top of second hinge location and then do the same for the hinge location. (If you have three hinges) 2. Measure from the top of the door to the center of the knob hole. $20.00 Plus Door Slab Per Door 6/8 7/0 8/0 A. 7" B. 36-1/4" C. 65-1/2" D. N/A A. 6-3/4" B. 36" C. 65-1/4" D. N/A 3-1/2" Hinges 7" 38-1/4" 69-1/2" N/A 4" Hinges 6-3/4" 38" 69-1/4" N/A 7" 33" 59" 85" 6-3/4" 32-3/4" 58-3/4" 84-3/4" 3. Measure the overall height of the door 6/8, 7/0 or 8/0. 4. Determine your door swing RH/LH. Refer to page 79. 6/8 7/0 8/0 5. Determine the type of hinges you have 3-1/2" or 4" radius or square corner. 6. Choose your new door style. 2-1/4" x 1" Lock Face 2-1/8" Face Bore 2-3/8" Backset 7. Install your new door. Add an Additional $20.00 Per Door to Machine for Square Corner Hinges. FEB FAX info@bairdbrothers.com 83

38 B AIRD B ROTHERS DOOR FRAME ASSEMBLY Door Jamb Header Door Jamb Leg Hinge Mortise Door Stop Pre-Hanging charges cover jambs, door stop, hinges, prep for hinges, and prep for lockset. (Std. 2-1/8" bore and 2-3/8" backset) 84 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

39 WIDTH x HEIGHT (Feet / Inches) DOOR SPECIFICATIONS ROUGH OPENING WIDTH ROUGH OPENING HEIGHT 6/8 2/0 (Single) 26" 82-1/2" 2/4 (Single) 30" 82-1/2" 2/6 (Single) 32" 82-1/2" 2/8 (Single) 34" 82-1/2" 3/0 (Single) 38" 82-1/2" 4/0 (Double) *50" 82-1/2" 4/8 (Double) *58" 82-1/2" 5/0 (Double) *62" 82-1/2" 5/4 (Double) *66" 82-1/2" 6/0 (Double) *74" 82-1/2" *Double Door Units with an T-Astragal, Add 1" to Rough Width FINISHED OPENING REQUIREMENTS MOULDINGS Bifold Nominal Width x 81" Height FINISHED OPENING WIDTH 2 Doors = 2x Door Width Minus 1" Bypass Sliding 3 Doors = 3x Door Width Minus 2" FINISHED OPENING HEIGHT Light-Duty Hardware (Hollow Core Doors) 82-1/4" Heavy-Duty Hardware (Solid Core Doors) 82-5/8" Pre-hung units specify louvers up or down on hinge side. HARDWARE Installed hardware options for pre-hung double door units. T-ASTRAGAL BALL CATCH FLUSH BOLT FEB FAX info@bairdbrothers.com 85

40 MOULDINGS 86 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

41 Width x Height (Feet x Inches) 6/8 Doors Pine Combination Doors 1-1/16 thick Half-View 1-lite /4 View 1-lite /4 View 4-lite /4 View 8-lite /4 View 12-lite Full View 1-lite Full View 15-lite 2/0 x 6/8 Complete (Sash & Screen) Door /0 x 6/8 Blank Door /6 x 6/8 Complete (Sash & Screen) Door /6 x 6/8 Blank Door /8 x 6/8 Complete (Sash & Screen) Door /8 x 6/8 Blank Door /0 x 6/8 Complete (Sash & Screen) Door /0 x 6/8 Blank Door /0 Doors 2/0 x 7/0 Complete (Sash & Screen) Door /0 x 7/0 Blank Door /6 x 7/0 Complete (Sash & Screen) Door /6 x 7/0 Blank Door /8 x 7/0 Complete (Sash & Screen) Door /8 x 7/0 Blank Door /0 x 7/0 Complete (Sash & Screen) Door /0 x 7/0 Blank Door Inserts 2/0 Sash Insert /0 Screen Insert /6 Sash Insert /6 Screen Insert /8 Sash Insert /8 Screen Insert /0 Sash Insert /0 Screen Insert Sash inserts are made with 1/8 thick tempered safety glass. Screen inserts are made with charcoal aluminum screen. The inserts are held secure with a sure locking fastener that makes changing them quick and easy. Prices include clear treat which has a pitch blocker, biocide for fungus, and wood preservative. Machining Options: Bore for Knob-$20.00 Prep for Hinges-$25.00 Reduce Width-$20.00 Reduce Height-$ /8 doors maximum trim limitations - bottom 2-1/4, top 5/8, stiles 3/4 per side 7/0 doors maximum trim limitations - bottom 1-3/4, top 5/8, stiles 3/4 per side Trimming in excess of the above limits voids one year warranty. Combination doors are also available special order in many hardwood species such as cedar, mahogany, and white oak. Please call for pricing and lead time. Complete door primed white, add $40. Prices Are Subject To Change Without Notice FEB FAX info@bairdbrothers.com 87

42 Pine Storm & Screen Doors 1-1/16 Thick Width x Height (Feet x Inches) 6/8 Doors 401 Fixed 1-lite 406 Fixed 6-lite 503 Fixed Screen 3-panel 505 Fixed Screen 5-panel 2/6 x 6/8 Door Slab /8 x 6/8 Door Slab /0 x 6/8 Door Slab /0 Doors 2/6 x 7/0 Door Slab 2/8 x 7/0 Door Slab 3/0 x 7/0 Door Slab Storm doors are made with 1/8 thick tempered safety glass. Screen doors are made with charcoal aluminum screen. Prices include clear treat which has a pitch blocker, biocide for fungus, and wood preservative. Primed white add $20 Machining Options: Bore for Knob $20.00 Prep for Hinges $25.00 Reduce Width $20.00 Reduce Height $ /8 doors maximum trim limitations bottom 2-1/4, top 5/8, stiles 3/4, per side 7/0 doors maximum trim limitations bottom 1-3/4, top 5/8, stiles 3/4, per side Trimming in excess of the above limits voids one year warranty. Storm and screen doors are also available special orer in custom sizes and many hardwood species such as cedar, mahogany, and white oak. Please call for pricing and lead time. Combination, Storm, & Screen Door Specifications PI301 PI302 PI303 PI401 PI406 PI503 PI505 Stiles 4-3/8 4-3/8 4-3/ /4 3-3/4 Bottom 8-3/4 8-3/4 8-3/4 8-7/8 8-7/8 8-1/8 8-1/8 Lock 4-3/ /4 - - Top 4-3/8 4-3/8 4-3/ /4 3-3/4 Intermediate /8 1-1/2" 1-1/2" Mullion(s) 4-3/ /8-1-1/2" Prices Are Subject To Change Without Notice 88 BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

43 Width x Height (Feet x Inches) Pine Blinds & Shutters 1-1/16 Thick /8 Slats /4 Slats Panel Panel 2/0 x 3/ /0 x 3/ /0 x 3/ /0 x 4/ /0 x 4/ /0 x 4/ /4 x 2/ /4 x 2/ /4 x 3/ /4 x 3/ /4 x 3/ /4 x 4/ /4 x 4/ /4 x 4/ /4 x 5/ /4 x 5/ /4 x 5/ /4 x 6/ /4 x 6/ /4 x 6/ /8 x 2/ /8 x 2/ /8 x3/ /8 x 3/ /8 x 3/ /8 x 4/ /8 x 4/ /8 x 4/ /8 x 5/ /8 x 5/ /8 x 5/ /8 x 6/ /8 x 6/ /8 x 6/ Prices include your choice of white primer or clear treat. The white primer has a pitch blocker and biocide for fungus, and the clear treat both of those, plus preservative. Blinds and shutters are also available sprecial order in many hardwood species such as cedar, mahogany, and white oak. Please call for pricing and lead time. Cutting past maximum trim limitations bottom 1, top 1/4, stiles 1/4 per side voids 1 year warranty. Prices Are Subject To Change Without Notice FEB FAX info@bairdbrothers.com 89

44 WIDTH x HEIGHT (Feet / Inches) Pine Blinds & Shutters 1-1/16 Thick /8 Slats /4 Slats Panel Panel 3/0 x 2/ /0 x 2/ /0 x 3/ /0 x 3/ /0 x 3/ /0 x 4/ /0 x 4/ /0 x 4/ /0 x 5/ /0 x 5/ /0 x 5/ /0 x 6/ /0 x 6/ /0 x 6/ Prices include your choice of white primer or clear treat. The white primer has a pitch blocker and biocide for fungus, and the clear treat both of those, plus preservative. Blinds and shutters are also available special order in many hardwood species such as cedar, mahogany, and whaite oak. Please call for pricing and lead time. Actual pair size 1/4 less than nominal size in width and height. Cutting past maximum trim limitations bottom 1, top 1/4, stiles 1/4 per side voids 1 year warranty. Prices Are Subject To Change Without Notice Blinds & Shutter Specifications PI308 PI309 PI310 PI311 Stiles 2-1/ /4 2-1/4 Bottom 4-5/8 3-1/2 4-11/ /16 Middle 2-1/8 2-1/8 2-1/4 2-1/4 Top 2-1/4 2-1/4 2-5/16 2-5/16 WIDTH x HEIGHT (Feet / Inches) Pine Café Doors 1-1/16 Thick 306 Louvered Panel 307S Spindle Top 2/6 x 4/ /8 x 4/ /0 x 4/ BAIRD BROTHERS FINE HARDWOODS 7060 CRORY ROAD CANFIELD, OH FEB 12

45 Hopefully the following information will help you determine which hardwood best meets your lifestyle. Each specie has unique characteristics, the two most determining of which are hardness and visual appeal or color. The following chart will give you a hardness measurement. The Janka (or side) hardness test, measures the force (pounds/square inch) required to embed a.444 inch steel ball to half its diameter in the wood. These figures are a good indicator of how resistant the wood is to denting and wear. MOULDINGS Information obtained from: Wood Handbook Wood as an Engineering Material. General Technical Report 113. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. FEB FAX info@bairdbrothers.com 91

46