Wood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched.

Size: px

Start display at page:

Download "Wood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched."

Derick Pierce
6 years ago
Views:

2 Wood Specifications The infinite variety in color, grain and teture is what gives wood its rich character and natural warmth. Along with all of the differences among varying wood species, no two trees are alike. Climate, light, rainfall, and minerals in the soil all create diverse and unique grain and color patterns in each piece of wood. Because of all the variables and options available in choosing a wood species, we ve prepared the guidelines below to assist you in selecting the right wood for the desired end result. Alder The color tones of alder consist of a range of red to brown. Burl and pin knots are acceptable. Panel rips are arranged to form a reasonable blend of grain matching and wood color tones. Ash Basswood Cherry European Beech Hickory Knotty Pine Mahogany Paint Grade Maple Red Oak Rustic Alder Rustic Cherry Stain Grade Maple Walnut White Maple The color tones of ash consist of a wide range of cream to light brown with some dark streaks. Burl and pin knots are acceptable. Ash is not selected for color. Panel rips are arranged to form a reasonable blend of grain matching and wood color tones. The color tones of basswood consist of a range of cream to light brown with some dark streaks. Panel rips are arranged to form a reasonable blend of grain matching and wood tones. Cherry may contain some sapwood (white wood from the other section of the log). Grain and color are matched to form a reasonable blend. Eposure to light causes cherry to darken with age, revealing a deep reddish brown tone. Gum pockets are a natural characteristic of cherry. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched. Unlike most other wood species, hickory has a unique grain pattern and variety of color tones all of its own. Our standard hickory has a lot of character and is not selected for color. Our knotty pine has brownish-red tight knots and is suitable for rustic style cabinetry. Mahogany s color varies from golden brown to light reddish color tones. It has occasional pin knots or burl. Paint grade maple is used mostly for drawers and paint grade doors. Color is not selected. Red oak is selected for color. Defects such as knots and splits are removed. Character, such as burl and pin knots are acceptable. Panel rips are arranged to form a reasonable blend of grain matching and color tones. Rustic alder is a unique species that allows for many variations. Pitch, mineral, sap and knots are common. Color may vary from light tan sapwood to reddish brown heartwood blended throughout. Knot size, the percentage of mineral, sapwood and heartwood are not allowed to be specified by the customer. All material will be structurally sound. We recommend that you order a sample door to avoid confusion. Rustic cherry is a unique species that allows for many variations. Pitch, mineral, sapwood, heartwood and knots are common. Color variations may range from white in the sapwood area to a deep red in the heartwood area. Knot size, the percentage of pitch, sapwood, heartwood and number of knots are not allowed to be specified by the customer. All material will be structurally sound. We recommend that you order a sample door to avoid confusion. Stain grade soft maple ranges from creamy white to brown to gray color tones. Some mineral is acceptable. It is suitable for medium to dark stains. Walnut may have up to 15% sapwood. Burl and pin knots are acceptable. White soft maple is light brown to a creamy tan wood with a subtle grain pattern and is suitable for natural finish as well as light to dark stains. Page 1

How to Measure the cost of Doors and Drawer Fronts The following eample is based on a Square Raised Panel Door. 1. Round the dimensions of the door to the net highest inch.

3 How to Measure the cost of Doors and Drawer Fronts The following eample is based on a Square Raised Panel Door. 1. Round the dimensions of the door to the net highest inch. Eample: 11 1/2 23 1/2 = Height 2. Find the total square inches for the door. Eample: = 288 (2 sq. ft min. for doors & 1 ½ sq. ft. min. for drawer fronts) Width 3. Multiply the sq. inches and the material cost. (See Material Cost Chart) Eample: Material Cost for Basswood is square inches = $12.41 Height Width 4. Add the design cost (per panel) Eample: Material cost plus design cost equals $ $12.75 = $ Any additional features. End Panels: Add 8% Panels over 37 tall: Add $ for each oversized panel Height Width All panel ends will have a design cost per panel. All doors measuring over 24 wide will be made as a double panel unless specified as a single panel. Single panel doors over 24 wide will not be guaranteed. All doors over 41 in height will be made as double panel doors unless specified as single panel. Single panel doors over 41 high will not be guaranteed. All items such as non-standard stiles and rails, or special panel spacing, etc., will be considered end panels and charged the additional 8%. Refer to Panel End brochure page for pricing and ordering details. Please order all doors Width Height Please order all drawer fronts, Raised Panel & Slab, Width Height Page 2

4 Flat Panel & Shaker Doors Square Flat Panel ¼ Plywood Design* Cost: $9.00 Minimum Size: 7 7 ½ Backcut Design* Cost: $12.75 Minimum Size: 8 8 Shaker Door ¼ Plywood Panel Design Cost: $9.00 Minimum Size: 7 7 French Arch Please call for maimum width ¼ Plywood Panel* Design Cost: $15.00 Minimum Size: 7 9 ½ Backcut Panel* Minimum Size: 8 1/8 10 Shaker Door ½ Backcut Panel* Design Cost: $12.75 Minimum Size: 8 8 Roman Arch Please call for maimum width ¼ Plywood Panel* Design Cost: $15.00 Minimum Size: 7 9 ½ Backcut Panel* Minimum Size: 8 1/8 10 Shaker Door 2Pnls. L/R ¼ Plywood Panel* Design Cost: $17.00 Minimum Size: 14 8 ½ Backcut Panel* Design Cost: $24.50 Minimum Size: 15 9 Cathedral Arch Please call for maimum width ¼ Plywood Panel* Design Cost: $15.00 Minimum Size: 7 9 ½ Backcut Panel* Minimum Size: 8 1/8 10 Shaker Door ¼ Beaded Plywood Panel** Design Cost: $10.00 Minimum Size: 7 7 ½ Backcut Beaded Panel* Minimum Size: Square Foot Minimum Material Cost *¼ Veneered MDF available in most species, ask for details. **¼ Beaded Plywood available in Oak, Maple, & Pine. *½ Backcut Beaded available in all materials. Page 3

5 Arched & Square Raised Pnl. Doors Square Raised Panel Door Design Cost: $12.75 Minimum Size: 8 1/8 8 1/8 Square Raised Panel 2 Panel, Side by Side Design Cost: $24.50 Minimum Size: /8 Cathedral Raised Panel Door Please call for maimum width Minimum Size: 8 1/8 10 Dbl. Cathedral Raised Panel Please call for maimum width Design Cost: $24.75 Minimum Size: 8 1/8 12 Roman Raised Panel Door Please call for maimum width Minimum Size: 8 1/8 10 Dbl. Roman Raised Panel Please call for maimum width Design Cost: $24.75 Minimum Size: 8 1/8 12 French Raised Panel Door Please call for maimum width Minimum Size: 8 1/8 10 Dbl. French Raised Panel Please call for maimum width Design Cost: $24.75 Minimum Size: 8 1/ Square Foot Minimum Material Cost Page 4

6 Pantry & Saloon Raised Panel Doors Square over Square Pantry Door Design Cost $25.50 Minimum Size: 8 1/8 14 Cathedral over Square Pantry Door Design Cost $31.50 Minimum Size: 8 1/8 15 7/8 Roman over Square Pantry Door Design Cost $31.50 Minimum Size: 8 1/8 15 7/8 French over Square Pantry Door Design Cost $31.50 Minimum Size: 8 1/8 15 7/8 French Arch Saloon Doors Design Cost: $21.25 per door Maimum Width: 18 Roman Arch Saloon Doors Design Cost: $21.25 per door Maimum Width: 15 Panels will be equal sizes unless ordered otherwise. For non-standard spacing, please refer to end panel pricing. All solid wood raised panels and 1/2 backcut panels that are over 37 high will not be guaranteed against warping issues. Cathedral Arch Saloon Doors Design Cost: $21.25 per door Maimum Width: 18 All solid wood raised panels and solid wood 1/2 backcut panels that are over 37 high will have an additional $10.00 charge per panel. Page 5

7 Miter Door and Drawer Rail Profiles Minimum Sizes for 2 & 3 2 3/8 Rails, Raised Panel - Min. 8 5/8 2 3/8 Rails, ¼ Plywood Panel - Min. 5 1/4 2 3/8 Rails, ½ Backcut Panel - Min. 6 3/4 3 Rails, Raised Panel - Min. 9 7/8 3 Rails, ¼ Plywood Panel - Min. 6 1/2 3 Rails, ½ Backcut Panel - Min. 8 Minimum Sizes for 1 ¾ & 2" 1 ¾ Rails, Raised Panel - Min. 7 3/8 1 ¾ Rails, ¼ Plywood Panel - Min. 4 1 ¾ Rails, ½ Backcut Panel - Min. 5 1/2 2 Rails, Raised Panel - Min. 7 7/8 2 Rails, ¼ Plywood Panel - Min. 4 1/2 2 Rails, ½ Backcut Panel - Min. 6 Design Costs ½ Solid Wood Panel = $19.25 ¼ Plywood Beaded Panel = $16.50 ½ Solid Beaded Panel = $25.25 ¼ Plywood Panel = $15.50 Raised Panels = $19.25 ** Rope mould is an additional $20.00 per panel ** ** 1 ½ square foot minimum material cost on all drawer fronts. ** 1 3/4 Addison Rope 2 3/8 Addison Rope 1 3/4 Jamison Rope 2 3/8 Jamison Rope 1 3/4 Addison 2 3/8 Addison 1 3/4 Jamison 2 3/8 Jamison 2 Nash 2 3/4 Nash 2 3/8 Vermont Page 6

8 Miter Door and Drawer Rail Profiles 2 Savannah w/ 1/4 RWR 3 Savannah w/ 1/4 RWR 2 Savannah w/ Sq. Roll 3 Savannah w/ Sq. Roll 2 Savannah w/ Addison 3 Savannah w/ Addison 2 Franklin 3 Franklin 1 3/4 Linu 2 3/8 Linu 2 Douglas 3 Douglas 2 Colonial 3 Colonial 1 3/4 Heritage 2 3/8 Heritage 2 Windsor 3 Windsor Page 7

Miter Doors Addison Jamison 2 3/8 Rails, ¼ Plywood Panel - Min.

6 3/4 1 ¾ Rails, ½ Backcut Panel - Min. 5 1/2 ½ Solid Wood Panel = $19.

25 Minimum Sizes for 2 3/8 & 1 ¾ 2 3/8 Rails, Raised Panel - Min.

50 ¼ Plywood Panel = $15.50 Applied Moulding = $18.

9 Miter Doors Addison Jamison 2 3/8 Rails, ¼ Plywood Panel - Min. 5 1/4 1 ¾ Rails, ¼ Plywood Panel - Min /8 Rails, ½ Backcut Panel - Min. 6 3/4 1 ¾ Rails, ½ Backcut Panel - Min. 5 1/2 ½ Solid Wood Panel = $19.25 ½ Solid Beaded Panel = $25.25 Raised Panels = $19.25 Minimum Sizes for 2 3/8 & 1 ¾ 2 3/8 Rails, Raised Panel - Min. 8 5/8 1 ¾ Rails, Raised Panel - Min. 7 3/8 Design Costs ¼ Plywood Beaded Panel = $16.50 ¼ Plywood Panel = $15.50 Applied Moulding = $18.50 ** 1 ½ foot minimum material cost on all drawer fronts. ** Applied Moulding Cove with Reveal P.W. Panel Cope & Stick Cove Panel with Reveal = $30.75 ½ Solid Wood Panel = $30.75 ½ Solid Beaded Panel = $36.75 Design Costs Miter Cove Panel with Reveal = $37.25 ½ Solid Wood Panel = $37.25 ½ Solid Beaded Panel = $43.25 Page 8

10 Glass Doors Square Full Glass Door Design Cost: $ Square Foot Minimum Miter Full Glass Door Design Cost: $ Square Foot Minimum Applied Moulding Full Glass Door Design Cost: $ Square Foot Minimum Arched Sash Door Design Cost: $23.75 and $5.00 Per Light 2 Square Foot Minimum 9- Lite Border Sash Design Cost: $ Square Foot Minimum Miter 9-Lite Border Sash Design Cost: $ Square Foot Minimum Cope & Stick Sash Doors and $5.00 Per Light 3 Square Foot Minimum Miter Sash Doors Design Cost: $19.25 and $5.00 Per Light 2 Square Foot Minimum Page 9

11 Panel Ends Height Width 60 When Ordering Panel Ends, Please Include All of The Information Listed Below Material - Paint Grade Maple Type of Panel End - Square Raised Panel, 3 Panels Left to Right Panel Type - Bevel Panel End Edge Type - No Edge Width - 60 Height - 36 Stiles and Rails measurements - Top = 4, Bottom = 6, Left = 4, Right = 4, Vertical Mullions = 3 Pricing Panel Ends Width Height = Square Inches - Square Inches *Square Inch Material Cost* = Material Cost - Number of Panels **Design Cost** = Panel End Design Cost - Material Cost + Panel End Design Cost = Total Panel End Cost - Total Panel End Cost 8% = Design Charge - Total Panel End Cost + Design Charge = Invoice Price for Panel End = $ = $ $12.75 = $ $ $ = $ $ = $ 8.59 $ $8.59 = $ * Please call for Square Inch Material Cost ** Refer to Pages 5-8 for Design Cost Page 10

Drawer Fronts Slab Design Cost: See pricing Sheet Minimum Size: 8 4 Raised Panel Design Cost: $12.75 Minimum Size: 8 1/8 6 ½ Shaker Design Cost: $12.75 Minimum Size: 8 5 ¼ Flat Panel Design Cost: $9.

12 Drawer Fronts Slab Design Cost: See pricing Sheet Minimum Size: 8 4 Raised Panel Design Cost: $12.75 Minimum Size: 8 1/8 6 ½ Shaker Design Cost: $12.75 Minimum Size: 8 5 ¼ Flat Panel Design Cost: $9.00 Minimum Size: 7 5 ¼ **Drawer Fronts under 8 1/8 tall will require the rails to be cut down. Panel Profiles Available Cove Bevel Ogee 1/2 Backcut P. W. 1/2 Backcut Beaded Plywood Panel Styles Plywood Beaded Plywood Door & Drawer Front Edge Profiles 3/8 Cove 1/4 Roundover w/ Reveal Ogee 3/8 Roundover w/ 1/16 Reveal Square Ogee Patton Square Eased Edge Roundover 12 Degree Edge Page 11

13 Ordering Information Orders can be placed by: A. Fa (770) B. Phone (770) C. D. Mailing Address Old Federal Millworks 6031 Jim Crow Road, Flowery Branch, GA All orders placed by , fa, or postal mail will be guaranteed by Old Federal Millworks to be shipped as ordered. All telephone orders will be read back to the customer when placed. Since telephone order errors cannot be traced, all telephone orders will be acknowledged and guaranteed by Old Federal Millworks to be shipped ONLY as acknowledged, not ordered. Costly errors and delays can be avoided by mailing, ing, or faing your orders. Please request order forms for your convenience. When placing orders, please specify: 1. Wood Species 2. Rail Design (Standard, Shaker, Miter, Applied Moulding, etc..) 3. Door Shape (Square, Roman, Cathedral, etc..) 4. Panel Type (Raised Panel, 1/2 Backcut, Glass, Beaded, MDF, etc..) 5. Outside Edge Profile 6. Door / Drawer Front Sizes (Do not give us opening sizes) Payment Terms First Order 50% Deposit, balance is COD, Company checks are accepted. After First Order COD by means of a company check, cash, money order, or credit card. Bad Checks There is a $30.00 service charge for all returned checks and all orders will be put on hold until the entire unpaid balance is paid in full. Cancellations / Changes All orders are made to the customer s specifications and most orders are in production within 24 hours of receipt. Therefore any changes or cancellations to orders in production are subject to an additional charge. Shipping Old Federal Millworks provides shipping to local businesses and most deliveries are not subject to a charge. It is the customer s responsibility to count all items and sign each of the delivery tickets. Your signature is only confirming that the correct numbers of items were delivered, so please do not delay our drivers to measure each item. You will have 5 days from receiving shipments to report any damages, shortages, or discrepancies. Page 12

Warranty All doors are guaranteed by Old Federal Millworks to be of good materials and workmanship, free from defects that render them unserviceable or unfit for the use for which they are intended

Because wood is like a sponge, even after it is finished, it will pick up moisture and easily epand in mountain and coastal regions causing the wood to warp, twist or crack.

We monitor the level of moisture in the material we receive. A proper moisture level reading should be at or below 8%. Doors with moisture content above 8% will not be covered by our warranty.

14 Warranty All doors are guaranteed by Old Federal Millworks to be of good materials and workmanship, free from defects that render them unserviceable or unfit for the use for which they are intended for twelve months from the purchase date. Because of the nature of wood, it will epand and contract. Changes in temperature, humidity and other conditions produce wood movement. Because wood is like a sponge, even after it is finished, it will pick up moisture and easily epand in mountain and coastal regions causing the wood to warp, twist or crack. It will also dry out and easily shrink in desert regions causing the wood to warp, twist or crack. Consequently, proper precautions must be taken during the storage, handling and finishing operations. We monitor the level of moisture in the material we receive. A proper moisture level reading should be at or below 8%. Doors with moisture content above 8% will not be covered by our warranty. Under no circumstances should unfinished millwork be delivered to a job or site that is under construction or open to the elements. Doors must NOT be stored in areas subject to abnormal heat, cold, dryness or humidity. Raw doors have not been sealed and therefore must be sealed immediately upon receipt. Sealing the doors with equal coats of finish on both sides and all edges within one week from delivery is necessary to minimize moisture absorption. Cherry products require special care. Due to the natural photosensitivity darkening process, cherry products must be finished immediately upon receipt. Doors finished with water based products will not be warranted. Natural variation in color or teture of plywood and solid wood is not considered to be defective. To view details about rustic descriptions, colors, and grain variation for each material, please refer to the Wood Specifications page in our brochure. Old Federal Millworks will not be responsible for improper handling or finishing of raw doors. Old Federal Millworks will not be liable for problems with doors that have been left unfinished for more than one week after delivery. Products must be inspected upon receipt. Our guarantee covers the replacement of doors and drawer fronts in an un-finished state and in good condition, as originally delivered. A warp or twist of 3/16" of an inch or less is not considered a defect. A twist is measured by placing the face of the door against a true plane surface. Maimum sizes guaranteed for doors are 24 wide and/or 40 tall. Maimum sizes guaranteed for drawer fronts are 24 wide and 12 tall. In order for solid wood panel doors that are over 24 wide or 40 tall to be warranted, they must be made with multiple panels. Glass frame and mullion doors are not warranted against warpage. Door sizes are guaranteed +/- 1/16. Our warranty does not cover damage caused by our customer or the consumer. Warranty covers replacement of product only. Warranty does not cover labor, removal or installation of any product, or damage associated with improper handling, alteration or storage. All items claimed to be defective must be returned before credits are issued. All returns are subject to an inspection of the product. There are no other warranties of any kind epressed or implied. Page 13

15 Old Federal Millworks Customer Name: Quote Only Place Order Material: *All 5-piece drawer fronts that are wider than they are tall will have horizontal grain on the panels unless otherwise specified.* Edge: Job: Doors: Drawer Fronts: Edge: Shape: Square French Arch Applied Moulding 5-Piece Roman Arch Cathedral Arch Standard 5-Piece Shaker 5-Piece Stiles & 2" Franklin Miter 2" Colonial Miter Applied Moulding Rails: 2" Savannah Miter 2" Windsor Miter Standard Shaker 1 3/4" Addison Miter 1 3/4" Jamison Miter Stiles & 3" Franklin Miter 3" Colonial Miter Slab Panel Cut Rails: 3" Savannah Miter 3" Windsor Miter 2 3/8" Addison Miter 2 3/8" Jamison Miter 1/4" Plywood 1/4" Bead Board 1/2" Backcut 1/2" Beaded Panels: 1/4" Plywood 1/4" Bead Board 1/2" V-Groove Cove w/ Reveal Panels: 1/2" Backcut 1/2" Beaded Cove Bevel Ogee PW 1/2" V-Groove Cove w/ Reveal Cove Bevel Ogee PW Grain: Horizontal Vertical Qty. Width Height Special Instructions Qty. Width Height To release a quote into production, please sign and date. (Signature) Phone: oldfedmillworks@bellsouth.net Fa: (Date)

Wood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched.

Wood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched. Wood Specifications The infinite variety in color, grain and teture is what gives wood its rich character and natural warmth. Along with all of the differences among varying wood species, no two trees