Black or White Classic Country Chair Item Number Black Chair: BH Item Number White Chair: BH

Transcription

1 ASSEMBLY INSTRUCTIONS Black or White Classic Country Chair Item Number Black Chair: BH Item Number White Chair: BH CUSTOMER SERVICE INFORMATION If parts are missing, DO NOT return to the store. To order missing or replacement parts, please call Victory Land roup, Inc 150 Munger Rd Bartlett, IL 6010 WEB: PHONE: FAX: :0 am to 5:00 pm CST, Mon. thru Fri. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Purchase Date: Lot Number: Please save and attach your sales receipt to this Assembly Instruction Booklet.

2 MAXIMUM RECOMMENDED WEIHT LOADS 1. Chair-maximum load weight is 00 pounds per chair. LIMITED W ARRANTY The manufacturer warrants to the original consumer-purchaser that this product shall be free from defects in workmanship and materials under normal and reasonable use when assembled and operated according to this Instruction Manual from date of purchase as follows: One Year The manufacturer will, at its option, refinish or replace any product or part found to be defective during the limited warranty period. There may be a shipping charge. The manufacturer may require you to return the part(s) claimed to be defective for its inspection, freight or postage prepaid. Contact our Customer Support Center as shown above before returning any part(s). The manufacturer will require reasonable proof of purchase. We strongly recommend you keep your sales receipt. You can attach your receipt to this manual. This limited warranty does not cover the cost of any inconvenience or property damage due to failure of the product and does not cover damage due to misuse, abuse, alteration, improper or failure to perform normal and routine maintenance, discoloration, scratches, rust, accident, damage arising out of transportation of the product, or normal wear and tear. This limited warranty will not apply to any Black or White Classic Country Chair for commercial use. This limited warranty is the sole warranty given by the manufacturer and is in lieu of all other warranties; express or implied, including implied warranty of merchantability or fitness for a particular purpose. Neither manufacturer dealers nor the retail establishment selling this product have any authority to make any warranties or to promise remedies in addition to or inconsistent with those stated above. This limited warranty applies only to products sold at retail, and is not transferable. The manufacturer's maximum liability, in any event, shall not exceed the purchase price of the product paid by the original consumer-purchaser. Some states do not allow the exclusion or limitation of incidental or consequential damages. Therefore, the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and may also have other rights, which vary from state to state. 1

3 ENERAL INFORMATION, TIPS, & TRICKS 1. Please read the Assembly Instructions prior to assembling this product.. To avoid damage, assemble the product on a non-abrasive surface such as carpet.. Make sure all screws, nuts, and bolts are tightly fastened before the product is used. 4. Not for Commercial Use 5. Keep all 4 legs of the chairs on the ground when using them. Do not rock or tip back in the chairs. 6. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the wood as needed. Avoid prolonged exposure to moisture and sunlight. 7. Estimated assembly time is fifteen minutes when one person is assembling. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts and nuts. A Phillips head screwdriver is necessary for assembly. It s not included in hardware list.

4 CHAIR PART LIST E. Chair Back F. Front Legs QTY: 1 pc QTY: pcs. Seat Frame H. Chair Seat QTY: 1 pc QTY: 1 pc

5 CHAIR HARDWARE LIST 1. Nut. Spring Washer. Flat Washer 5/16 inch Dia 5/16 inch Dia 5/16 inch Dia QTY: 4 pcs QTY: 11 pcs QTY: 11 pcs 9. Long Bolt 11. Wood Screw QTY: 4 pcs 10. Short Bolt 1/4 Dia x inch L QTY: pcs 1/4 Dia x 1-/4 inch L QTY: pcs 6. Open-End Wrench QTY: 1 pc 4

6 ASSEMBLY INSTRUCTIONS-CHAIR REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 Nut 4 pcs Spring Washer 4 pcs Flat Washer 4 pcs 6 Open-End Wrench 1 pc Ensure wider end of holes face towards the bottom of the char legs F F a F PLASTIC PLU b Remove the plastic plugs protecting the bolts from the front legs (F). Attach two front legs (F) to seat frame () using nuts (1), spring washers () and flat washers (). Don t tighten the nuts at this time. Note: The chair seat frame () has one screw hole in each side and one in the front to attach the chair seat at a later step. These holes are wider on the bottom and narrower on the top. Ensure the wider holes look down towards the bottom of the chair legs (F). 6 5

7 ASSEMBLY INSTRUCTIONS-CHAIR REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY Spring Washer 7 pcs Flat Washer 7 pcs 6 Open-End Wrench 1 pc 9 Long Bolt 4 pcs 10 Short Blot pcs 6 a 10 E b 9 9 E. Attach the seat frame () to the chair back (E) using long bolts (9), short bolts (10), spring washers () and flat washers () as instructions (a&b).. Turn the chair upright. Tightly fasten all bolts and nuts ensuring the chair remains level. 6

8 ASSEMBLY INSTRUCTIONS-CHAIR REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 11 Wood Screw pcs a 11 H E 4. Place chair seat (H) upside down on a non-abrasive table surface. The rear (tapered end) of the chair seat (H) should be near the table edge. Hint: Protect the non-abrasive table surface and chair seat (H) by laying a towel in-between the chair seat and table. 5. Place the assembled chair frame on the chair seat (H) as shown. Attach with wood screws (11). 7

9 ASSEMBLY INSTRUCTIONS-CHAIR 00 pounds ( 16,08 kg ) Maximum Recommended Weight Load 6. The Classic Country Chair is now ready for use. Printed in Vietnam 8