ALUMINUM FENCE. Additional freight charges may apply depending on order size. Please call for quote at

Transcription

1 ALUMINUM FENCE Additional freight charges may apply depending on order size. Please call for quote at

2 Powder Coat Finish FORGERIGHT Fences are offered in the choice of three colors: Black, White or Bronze. Our powder coat finish is more durable than a painted or baked enamel finish and is backed by our lifetime limited warranty. Pool Code Approved Fences Some fence sizes and styles are suitable for pool enclosures. Pool code compliant sizes and styles are marked in the catalog with the pool code icon. Gates around pools may need a magnetic pool latch to be compliant with local codes. Magnetic latches can be found in the catalog under accessories on page 7. Please consult your local building codes before choosing and installing your fence. Lifetime Limited Warranty Every FORGERIGHT fence product is backed by our lifetime limited warranty. See page 8 for warranty details. Available Fence Style Price Heights Racking Pages Newtown Starting around $50 per panel for 4ft 4ft 22º 3-4 Vinnings Starting around $60 per panel for 4ft 54in 5ft 54in 5ft 22º 5-6 Additional freight charges may apply depending on order size. Please call for quote at

3 Fax #: Lead Time: Days (Calendar Days) Newtown Fence FORGERIGHT s Newtown aluminum fence has a two rail smooth top design. Fence can be installed on flat ground or on a slight incline. Picket spacing is 3-13/16 in. Newtown gates are available in straight and arched top designs. All gates are pool code approved. BLACK WHITE BRONZE PANELS Description x 6ft W Fence Panel in H x 72in W Corner Line End POSTS 72in Line Post 72in Corner Post 72in End/Gate Post 72in Line Post 72in Corner Post 72in End/Gate Post BLACK WHITE BRONZE Fits Panel NOTE: All Posts are pre-routed to accept rails and include caps and screws. Cap Style

4 Newtown Fence Straight Gate Arched Gate GATES BLACK WHITE BRONZE x 4ft W Gate x 5ft W Gate x 6ft W Gate x 4ft W Arched Gate x 5ft W Arched Gate in H x 47in W 48in H x 59in W 48in H x 71in W 48in H x 47in W 48in H x 59in W NOTE: Gates are not designed for use with powered gate operators. Pool code compliant installations will require a magnetic latch release mechanism which is 54 in. or more from gate bottom. See accessories on pg. 7 for magnetic latch information. Please consult your local building codes before choosing and installing your fence.

5 Fax #: Lead Time: Days (Calendar Days) Vinnings Fence FORGERIGHTS s Vinnings aluminum fence is a more elegant, smooth top design with exposed bottom pickets on the 4ft and 5ft panels, and flush bottom on 54 in. fence panels. Picket spacing is 3-13/16 in. PANELS BLACK WHITE BRONZE x 6ft W Fence Panel x 6ft W Fence Panel x 6ft W Fence Panel in H x 72in W x 72in W 60in H x 72in W

6 Fax #: Lead Time: Days (Calendar Days) Vinnings Fence Corner Line End POSTS BLACK WHITE BRONZE Fits Cap Panel Style 72in Line Post 72in Corner Post 72in End/Gate Post 72in Line Post 72in Corner Post 72in End/Gate Post 79in Line Post 79in Corner Post 79in End/Gate Post 79in Line Post 79in Corner Post 79in End/Gate Post 84in Line Post 84in Corner Post 84in End/Gate Post 84in Line Post 84in Corner Post 84in End/Gate Post NOTE: All Posts are pre-routed to accept rails and include caps and screws. Straight Gate 54 in. Flush Bottom Arched Gate Straight Gate GATES BLACK WHITE BRONZE x 4ft W Gate x 5ft W Gate x 6ft W Gate x 4ft W Arched Gate x 5ft W Arched Gate x 4ft W Gate - FLUSH BOTTOM x 4ft W Gate x 5ft W Gate x 4ft W Arched Gate in H x 47in W 48in H x 59in W 48in H x 71in W 48in H x 47in W 48in H x 59in W x 47in W 60in H x 47in W 60in H x 59in W 60in H x 47in W NOTE: Gates are not designed for use with powered gate operators. Pool code compliant installations will require a magnetic latch release mechanism which is 54 in. or more from gate bottom. See accessories on pg. 7 for magnetic latch information. Please consult your local building codes before choosing and installing your fence. Gates are a nominal 1in. less than the opening to accommodate hinges and latch.

7 Accessories BLACK WHITE BRONZE Adjustable Wall Mount Wall Mount Deck Mount Cap Post Cap, External Butterfly Scroll Estate Scroll Gravity Latch Drop Rod - 24in. Long Magnetic Protector Gate Latch - 10 in. Magnetic Protector Gate Latch in. 5in. Self Closing Gate Hinge /8in x 1-1/2in 2-3/8in x 1-3/8in x 1in 4-3/8in sq x 1-3/4in tall 2-1/4in sq x 3-5/8in tall 2in x 2in 3-1/2in x 3-3/4in 16in x 5-3/4in 24in x 5/8in 10in 19-1/2in 5in x 3in Adjustable Wall Mount Used to secure rail to wood or concrete surface. Gravity Latch Post Cap Post Cap Wall Mount Used to secure rail to wood or concrete surface. Butterfly Scroll Used for decoration on fence pickets. Deck Mount Used to secure base of post to wood or concrete surface. (screws not included) Drop Rod Assembly For use with drive gates. Secures gate to driveway. Magnetic Protector Gate Latches Used on pool gates. 5 in. Self Closing Gate Hinge 2 required per gate. Estate Scroll Used for decoration on gates.

8 LIMITED LIFETIME CONSUMER WARRANTY WARRANTY The Manufacturer warrants that, for so long as the original purchaser owns the home where this product is installed, this product will be serviceable for use as exterior residential ornamental fencing and the coating will not peel, chip, crack, blister, or flake. This warranty does not apply if this product is installed for commercial use. This warranty does not apply to damage to the product or coating from mishandling, installation or storage which does not comply with applicable instructions, exposure to extreme temperatures (greater than 200 F or less than -50 F), impact, abrasion, exposure to corrosive chemicals, misuse, acts of God, or normal wear and tear. This warranty is not transferable. SCOPE OF WARRANTY The Manufacturer will either repair or replace non-conforming product or component, at its option; it will not however, pay for the costs of labor to remove or replace the non-conforming product or component. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING OTHER WARRANTIES OF MER- CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, EXEMPLARY, CONSEQUENTIAL, OR SIMILAR DAMAGES; CUSTOMER S SOLE REMEDIES ARE SET FORTH IN THIS WARRANTY. Some states do not allow limitation of implied warranties or damages, so the preceding limitations may not apply to you. WARRANTY CLAIM PROCESS If you have a warranty claim, you may obtain service by sending written notice of the defect, a photograph of the non-conforming product or component, and a copy of your receipt to The Manufacturer, Attention: Warranty Claims, 2453 King Street Extension, Charleston, SC

9 Aluminum Fence Install Required Tools Hammer, tape measure, mason s string, wood stakes, shovel, post hole digger, wheel barrow, electric drill, Phillips screwdriver, wood blocks, adjustable wrench, hack saw, jig saw or hand held band saw. 1. Plan Your Design Decide on your layout, remembering that the posts are set 72-½ on center. Stake perimeter off with stakes and mason s string to keep posts in line while installing. 2. Choosing Posts Determine correct posts for use: line post, end/gate post or corner post. NOTE: Fence should have a 2 gap at bottom to allow for lawn maintenance. 3. Dig Post Holes Dig holes approximately 8 in diameter and about 24 deep. Depths may vary by local building codes and geographic locations. Mark the ground line on the post with chalk for proper height placement. Corner Post End Post NOTE: Please read all instructions carefully before beginning installation. Fig 1. Fig 2. TIP: Dig holes slightly less than full depth and using hammer and block of wood, drive post into ground the last few inches insuring proper depth and then hold panels upright before pouring concrete into holes. 4. Layout Gate Opening Posts for gate opening inside to inside, should be set 1 wider than the actual gate width, allowing for hinge and latch attachment. Dig holes as noted in step 3, inset posts, plumb and pour concrete, allowing concrete to cure before installing gate. TIP: Make sure gate/end post have holes aligned properly to have fence panel inserted in the correct direction to complete installation. 5. Panel Install Lay the first panel on ground, place posts on ends of all rails and insure that the post is pushed up to the notched portion of the rail for proper positioning. Secure the panels and posts together by using self-tapping screws (included with posts) approximately 3/8 from the edge of the post. Place assembled panel and post in post holes and continue to loose assemble the fence according to your layout. Once all panels are in place and posts are plumbed, pour concrete into each hole. Allow enough to trowel the top so that it slopes away from the post for water to run off. Fig 4. Line Post Fig 3. Fig 6. Fig 5.

10 6. Corners When installing a corner, a corner post must be used. Cut 45 angles in the ends of the panel rails. Use self-tapping screws to secure. Use a hacksaw, jigsaw or hand held band saw to make the cuts. Fig Short Panels Post spans shorter than 72-1/2 on center require cut panels. Determine the distance between inside of posts and then add 1-1/2 to get the full panel width. To keep equal end spacing of pickets, it may require cutting both ends. Use a hacksaw, jigsaw or hand held band saw to make the cuts. The notches need to be cut into newly cut ends. Use factory ends as a guide. Install panels as in step 5, using self-tapping screws to secure posts, insert into holes and pour concrete to complete. Fig 8. Cut Cut 8. Install Gate Start by planning the swing of the gate. Align the opened hinge so that the L-bracket will fit on the gate and the flat half of the bracket will attach to the end/gate post. Positioning hinges so that they are approximately 8 from the top and bottom of the gate panel. Start by installing hinges to end/gate post, opening the hinge and pushing fully against stop, keeping flush and attach to the post using 3 self-tapping screws (included w/ gate). Next, hold gate in position so that the gate panel top rail aligns evenly with the fence panel top rail, then position the gate into the L-bracket of the hinge and attach with 4 self-tapping screws. NOTE: Be sure to check local codes for any gate opening requirements, especially when enclosing a pool. Fig 9. Fig Inclines/ Hills Most fence panels rack to contour to the angle of the ground. The pickets remain vertical. The panel is racked by holding the bottom of the panel in place and then pushing the top either left or right. It is recommended not to exceed more than a 16 rise in the ground over a 6 panel. Posts are set similar to Step 3. Damaged or missing parts? Call our customer service department at , 8 a.m.- 5 p.m., EST, Monday-Friday. Fig 11. Fig 12. No More than 16 in.

11 ALUMINUM FENCE Origin Point Brands, LLC 2453 King Street Extension Charleston, SC office fax