NICHARGE UNIFIX 200. Le support universel (sol, mur, mât, ) 16/04/2018 CO00117

Transcription

1 NICHARGE FR EN ES Le support universel (sol, mur, mât, ) 16/04/2018 CO00117

2 Dear customer, we thank you for purchasing one of our Uniteck products. Please read carefully all instructions before using your product. Unifix brackets have been specially designed to fix your Unisun photovoltaic panels or equivalent (see part compatible panels): Unifix 200 for your Unisun panels 80.12M() / M() / M() / BC () / M / BC / M Simple to install, they attach either: on a rigid horizontal or vertical surface (eg wall, concrete floor, wood frame). on round mast with a diameter of 40 to 60 mm (supplied flange) on signaling posts using flanges with screws (flange not included) (Except Unifix 20 and 50) With our galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited for outdoor use. Equipped with the multi-position tilt system, Unifix supports allow you to optimize your performance according to the chosen orientation. 0 Adjustable By Electrical performance depending on tilt and panel orientation East 93% 90% 78% 55% South east 93% 96% 88% 66% South 93% 100% 91% 68% South west 93% 96% 88% 66% West 93% 90% 78% 55% To make the panel / regulator / battery connection, we recommend that you use the Uniconnect ready-touse kits that optimize your electrical performance and simplify installation: Uniconnect 1.6 = connection 1 panel Uniconnect 2.6 = connection 2 panels Uniconnect 3.6 = connection 3 panels 13/32

3 PANEL COMPATABILITY With the design based on the use of Oblong drilling, Unifix allows the fixing of different panels of the market. Unifix accepts 1 or 2 panels according to the references, with the spacings and dimensions of panels indicated below. L (p) L (e) H (e) H (p) Système de fixation par oblong Entraxe et dimensions panneau Configuration 2 panneaux Dim Support Unifix Number of panels Spacers for fastening of each panel (in mm) Panel Dimension Max L H x1 x 2 x 3 L (e) H (e) L (p)hh H (p) 400 > > 885 No max 150 > Total weight Of panels (In Kg) 22 SAFETY INSTRUCTIONS Take appropriate measures to prevent accidents during assembly work. If the bracket and mounting hardware are exposed to direct sunlight for a long time, there is a risk of burns. Protect yourself. At the end of the work, check that your supports and panels are securely fastened. 14/32

4 RECOMMENDATIONS Mount Unifix brackets only on surfaces with sufficient lift. Consider the additional load with panel: Support Panel Unifix 200 = 15 kg Unisun 80.12M() / M() / M() / BC () / M / BC / M =13 kg / 15 kg / 15 kg/ 14kg/ 20kg/ 21kg/27kg Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate shut-off gates upstream. The arrangement of the solar panel influences your electrical performance. Choose the most optimal inclination and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg tree) Before attaching and connecting, please observe: the maximum distances shown below between each element. connection order Unifix + wiring with Uniconnect connection kit Panel 3 Panel 2 panel 1 Cable- Regulator Batteries 1 m max (1) 1 m max (1) 8 m max 2 m max 1 4 m max (2) 2 (1) Possibility of extending the distance between the panels by one additional meter, by adding a Unicable 612B and 612 R (cables not supplied with the Uniconnect kits). (2) Unicable 612B and 612 R (cables not supplied with the Uniconnect kits). Ordre de connexion 1 connection regulator batterie connecting solar panel régulateur connecting regulator electrical usage For disconnection please proceed in reverse order. For more information, refer to the operating manual of your photovoltaic charge regulato 15/32

5 - PREPARATION LIST OF PIECES x100 X20 X34 X42 X42 n 15 n 16 n 34 n 17 n 13 N 9 N 10 Recommended tightening torque Vis Couple M5 5,10 Nm M 6 8,80 Nm M 8 21,50 Nm M 10 44,00 Nm Nb. Average friction coefficient μ = 0.20 / Tightening at 50% of the elastic limit 16/32

6 - PREPARATION BEFORE MOUNTING Assemble the 2 pieces N 17 on the Unisun photovoltaic panel (s). 1 panneau photovoltaïque 2 panneaux photovoltaïques 0 n 17 0 n 17 Attach parts N 15 and N 16 to part N 34. Pre-tighten the nuts. The final tightening will be carried out at the end of the assembly. 0 n 15 n 16 n 34 x1 17/32

7 - PREPARATION Pre-attach parts n 9 to part n 34. Do not tighten completely. 0 X2 X2 X2 n 34 x1 N 9 Secure the top bracket with 8 screws to fit your surface (screws and dowels not included) mm 18/32

8 - - WALL MOUNTING / FLOOR / ROOF Unifix has a multi-position tilt system. (10 positions). Set the desired tilt to the desired orientation. 0 Electrical performance depending on tilt and panel orientation Adjustable by Est 93% 90% 78% 55% Sud-Est 93% 96% 88% 66% Sud 93% 100% 91% 68% Sud Ouest 93% 96% 88% 66% Ouest 93% 90% 78% 55% Attach your panel to the desired tilt. 0 Now tighten the 4 nuts that were previously pre-screwed 19/32

9 - WALL MOUNTING / FLOOR / ROOF Add reinforcements N 10 and bar N 34 previously assembled. The position of your fixing screws on the rail of the bar N 9 determines the position of the lower bar on your wall. Fix the bar N 12 on the wall or flat surface. 0 Tighten all screws and check that all other screws have been tightened. 20/32

10 - FIXING ON ROUND MAT (40 TO 60 MM DIAMETER) Attach the bracket to the mast with 2 flanges and associated screws (for fixing to the signal mast, use the flanges corresponding to the mast used, flanges not included Fixing on round mat (40 to 60 mm diameter) x100 n 13 Unifix has a multi-position tilt system (10 positions). Set the desired incline according to the chosen orientation. 0 Electrical performance depending on tilt and panel orientation Adjustable by East 93% 90% 78% 55% South east 93% 96% 88% 66% South 93% 100% 91% 68% South west 93% 96% 88% 66% West 93% 90% 78% 55% Fasten your panel according to the chosen inclination /32

11 - FIXING ON ROUND MAT (40 TO 60 MM DIAMETER) Add reinforcements n 10 and bar n 34 previously assembled. The position of your fixing screws on the rail of the bar n 9 determines the position of the lower bar on your mast. Tighten all screws and check that all other screws have been tightened. 0 Fix the bar N 34 on the mast using the flanges N 13 and the associated screws. x100 X4 X4 X4 n 13 Tighten all screws and check that all other screws have been tightened.. 22/32