Model POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist

Size: px
Start display at page:

Download "Model POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist"

Transcription

1 Assembly and Installation Manual Projector Bracket Model POA-CHB-XL50 Be sure to consult with a qualified installation specialist This bracket is specifically for use with our projector. Be especially careful that children do not hang from it. Perform proper assembly and installation by following these Instructions. Be sure to follow all precautions. Contents Installation Precautions 2 List of Accessories 2 Install the projector bracket to the projector 3 Install the drop-prevention wire to the projector 4 Attach the projector to the ceiling bracket 5 How to adjust the projection angle 6 Dimensions 7 Approximate projection distance 8

2 Installation Precautions Installation Precautions When hanging a projector from a ceiling using this projector bracket (hereinafter called the projector bracket ), the ceiling must have adequate strength to support both the projector and the projector bracket. Before installation, check the combined weight of the projector, projector bracket and low-ceiling bracket/high-ceiling bracket as well as the strength of the ceiling based on that weight. If the strength is insufficient, provide adequate reinforcement before proceeding. Always mount on a level wall. Never install on an inclined wall. During installation, take appropriate measures (using wires, etc.) to prevent lateral swaying due to earthquakes or vibration. When setting up the projector, be careful not to clamp the power cord. Also, avoid using extension cords and running other appliances from the same wall outlet as the projector. If the power cord becomes damaged, replace the power cord. Do not route the power cord near the air outlet of the projector. M3 screw tightening torque: 7±1.0 (kgf-cm) M4 screw tightening torque: 12±1.0 (kgf-cm) M6 screw tightening torque: 50±1.0 (kgf-cm) The total weight of the projector bracket is 2.2 kg. List of Accessories Projector bracket x 1 Fixing plate x 2 Drop-prevention wire x 2 Assembly and Installation Manual (This Manual) Screws A Phillips pan-head machine screws (M4 x 12mm) x 7 Screws B Phillips hexagonal socket bolts (M6 x 12mm) x 4 Screws C Phillips pan-head machine screws with spring washer (M3 x 8mm) x 4 2

3 Install the projector bracket to the projector Turn over the projector and use five of the accessory screws A to securely mount the projector bracket onto the projector. Screws A Phillips pan-head machine screws (M4 x 12mm) x 5 3

4 Install the drop-prevention wire to the projector Use the accessory drop-prevention wires to secure the projector and the projector bracket (in two places) so that the projector will not fall down. Preventing the projector from falling down *Be sure to attach the drop-prevention wire as described in this Assembly and Instruction Manual. C B A Screw A...1 M4 x 12mm (Phillips pan-head machine screw with spring washer and flat washer) A Drop-prevention wires (accessory) Drop-prevention wires (accessory) C 1. Install the two accessory drop-prevention wires to A on the projector with the accessory screw A (M4 x 12mm). 2. Pass the drop-prevention wires through the holes C in the side of the projector bracket. B Screw A...1 M4 x 12mm (Phillips pan-head machine screw with spring washer and flat washer) Drop-prevention wires (accessory) 4 3. After the two drop-prevention wires have been passed through the projector bracket, secure them to B on the projector with the accessory screw A (M4 x 12mm).

5 Attach the projector to the ceiling bracket q Slide the projector bracket attached to the projector over the ceiling bracket (sold separately) attached to the ceiling as shown in the figure below. * Be careful not to drop the projector while this process. Although the projector is supported, it is not secured in place. Ceiling bracket Projector bracket w Use the screws B, the fixing plates and the screws C included to secure the projector to the ceiling bracket (sold separately). Screws B Phillips hexagonal socket bolts (M6 x 12mm) Screws C Phillips pan-head machine screws with spring washer (M3 x 8mm) Fixing plate Fixing plate Screws C Phillips pan-head machine screws with spring washer (M3 x 8mm) Screws B Phillips hexagonal socket bolts (M6 x 12mm) 5

6 How to adjust the projection angle Before adjusting: Read the projector instruction manual carefully, turn on the power, and project an image. Use the zoom to temporarily set the projection size, and then adjust the projection angle. Loosen the angle adjustment nut using the wrench included with the ceiling bracket (sold separately) and align the projector to project the image in the center of the screen. Then fasten the nut securely. Angle adjustment nut Turns left and right 360 Wrench If using a commercially-available wrench, use one with a size of 24mm. 15 horizontal tilt 15 horizontal tilt Caution After securing the projector angle, if the angle is readjusted without loosening the screw, the fastening area could be deformed, which could prevent it from being tightened again. When readjusting the angle, loosen the angle adjustment nut before adjusting the angle. If the adjustment is off center, readjust the angle. After making the adjustment, be sure the screw is securely tightened. 6

7 Dimensions High-ceiling bracket Distance from ceiling to top of projector (or to bottom when suspended from the ceiling) A length Low-ceiling bracket Distance from ceiling to top of projector (or to bottom when suspended from the ceiling) Min (Units: mm) A length (Units: mm)

8 Approximate projection distance (High-ceiling type) Screen size 67" 70" 80" X(mm) A length A length A length The values are intended as references only. The picture size may vary depending on the characteristics of the projection screen, so use the sliding mechanism to adjust the position. X(mm) (Units: mm) Y(mm) A length Sliding mechanism adjustment screws Sliding width (50mm to both front and rear) (Low-ceiling type) X(mm) (Units: mm) Screen size 67" 70" 80" X(mm) The values are intended as references only. The picture size may vary depending on the characteristics of the projection screen, so use the sliding mechanism to adjust the position. Sliding mechanism adjustment screws Y(mm) Sliding width (50mm to both front and rear) Caution Check that the sliding mechanism adjustment screws are fully tightened even when not using the sliding mechanism. 8

Bracket Assembly and Installation Manual

Bracket Assembly and Installation Manual Bracket Assembly and Installation Manual Model POA-CHB-DWL2500 Contents Installation Precautions ------------------------- 1 Parts list -------------------------------------------- 2 Attach the Projector

More information

ELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs)

ELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) ELPMB27 Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) Safety Instructions Before using the wall mount, make sure you read all of the safety instructions

More information

PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings)

PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings) English Ceiling Mount Bracket PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings) Installation Manual Be sure to read this manual thoroughly before using this bracket. After you have read this manual,

More information

PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings)

PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings) English Français Deutsch Svenska Italiano Español Nederlands Digital Cinema Projector Ceiling Bracket PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings) Installation Manual Be sure to read this manual

More information

MPA-9000 Universal Ceiling Projector Mount Kit

MPA-9000 Universal Ceiling Projector Mount Kit I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low

More information

Installation Instructions

Installation Instructions Installation Instructions Ceiling Mount Bracket for DLP Based Projectors (for High Ceilings) Model No. ET-PKD100H Contents Important Safety Notice.................. 2 For DLP Based Projector: PT-D10000

More information

ET-PKL100S. Installation Instructions. Ceiling Mount Bracket (for Low Ceilings) Model No.

ET-PKL100S. Installation Instructions. Ceiling Mount Bracket (for Low Ceilings) Model No. Installation Instructions Ceiling Mount Bracket (for Low Ceilings) Model No. ET-PKL100S Thank you for purchasing this Panasonic Product. JJ To customers The Installation Instructions is intended for use

More information

INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories Model: KTP-Series

INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories Model: KTP-Series INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories Model: KTP-Series The KTP-Series is a free standing, pole mount solution for multiple displays. KTP-320 KTP-220 / KTP-225

More information

TITAN2-EDGE Public Access Computer Station Dual Track

TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the

More information

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...

More information

FSCTD Dual Back to Back Flat Screen Ceiling Mount

FSCTD Dual Back to Back Flat Screen Ceiling Mount Page 1 of 6 FSCTD Dual Back to Back Flat Screen Ceiling Mount The FSCTD Dual Back to Back Flat Screen Ceiling Mount is designed to suspend a monitor from a single flange mounted to structure in the ceiling.

More information

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60

More information

BARCO PROJECTION SYSTEMS

BARCO PROJECTION SYSTEMS BARCO PROJECTION SYSTEMS CM CV120 & CV110 R9842330 INSTALLATION MANUAL Date : 16122004 Rev : 00 Art. No. : R5976715 Due to constant research, the information in this manual is subject to change without

More information

LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Multi-position triple pivoting arms allows you to position the monitor

More information

incorrect use or handling that exceeds normal operating limits.

incorrect use or handling that exceeds normal operating limits. User s Manual Wall mount unit for projectors Model name HAS-WM06 Thank you for purchasing a wall mount unit specially designed for Hitachi projectors. Be sure to read this manual and the User s Manual

More information

INSTALLATION MANUAL PBL-UMP

INSTALLATION MANUAL PBL-UMP INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...

More information

INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories Model: KTP-Series

INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories Model: KTP-Series INSTALLATION INSTRUCTIONS Horizontal And Vertical Table Stands and Accessories The KTP-Series is a free standing, pole mount solution for multiple displays. KTP-320 KTP-220 / KTP-225 KTP-440 / KTP-445

More information

Model Name: ROY6609B. Installation Instructions. Hardware Bags. Imp o r t a n t N o t e s. Component Checklist P.1

Model Name: ROY6609B. Installation Instructions. Hardware Bags. Imp o r t a n t N o t e s. Component Checklist P.1 P.1 Imp o r t a n t N o t e s Installation Instructions Model Name: ROY6609B I n s t al l a t i o n w il l r e q u i r e a m i n i m u m o f t w o p e o p l e. U n d e r n o c i r c u m s ta n c e s s

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and

More information

INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s*

INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s* INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: 83970 and 84360 Application: All UTV s* * does not include Arctic Cat vehicles Your safety, and the safety of others, is very important. To help

More information

LC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns

LC200C9F Ceiling Mount for up to 32 Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns Page 1 of 6 LC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns The LC200C9F Flat Screen Ceiling Mount is designed to suspend a monitor from a round flange

More information

INSTALLATION MANUAL ELPMB50

INSTALLATION MANUAL ELPMB50 INSTALLATION MANUAL ELPMB50 Frame for Epson projectors Epson EB-L1100 Epson EB-L1200 Epson EB-L1300 Epson EB-L1405 Epson EB-L1500 Epson EB-L1505 Safety instructions 1 Product description 5 Installing the

More information

IMPORTANT WARNINGS AND CAUTIONS!

IMPORTANT WARNINGS AND CAUTIONS! I N S T R U C T I O N M A N U A L The Christie Vivid Green ceiling mount will suspend your Christie Vivid Green projector in an upright position to compliment conference rooms, classrooms or home theater

More information

Assembly Instructions for model: VMPR1

Assembly Instructions for model: VMPR1 Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design

More information

Wooden Frame Type Instruction Manual

Wooden Frame Type Instruction Manual Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand

More information

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of Counterweight (page 2). 2. Describe

More information

XL-GC03 Sliding Door Lock Installation Manual PAT XL-GC06 Sliding Door Hanger Installation Manual XL-GC08 Sliding Door Lock Guide Installation Manual

XL-GC03 Sliding Door Lock Installation Manual PAT XL-GC06 Sliding Door Hanger Installation Manual XL-GC08 Sliding Door Lock Guide Installation Manual XL-GC0 Sliding Door Lock Installation Manual PAT XL-GC0 Sliding Door Hanger Installation Manual XL-GC0 Sliding Door Lock Guide Installation Manual Read all instructions carefully before installation. Before

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EPPA MONITOR ARM EPPA Rev A 10/17 Model EPPA-XXX ASSEMBLY AND ADJUSTMENT EPPA MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment procedures. Check

More information

EDGE2 DUAL MONITOR ARM

EDGE2 DUAL MONITOR ARM EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning

More information

Universal flat-panel mount

Universal flat-panel mount I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate

More information

Installation Instruction

Installation Instruction Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry

More information

Truss Pitch-Adjustable (TPP) Mount

Truss Pitch-Adjustable (TPP) Mount I N S T R U C T I O N M A N U A L Truss Pitch-Adjustable (TPP) Mount The Truss Pitch-Adjustable (TPP) mount is a perfect solution exhibit, retail and digital signage applications. The mount is quick, easy

More information

Wall mounting bracket

Wall mounting bracket Install Manual Wall mounting bracket Please read this manual carefully before operating your set and retain it for future reference. OSW200 P/NO : MFL63640578 (1502-REV01) www.lg.com COMPONENT Install

More information

INSTALLATION MANUAL PBC-UMS

INSTALLATION MANUAL PBC-UMS INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation

More information

Medium Flat Panel Dual Swing Arm Wall Mount JWD-V

Medium Flat Panel Dual Swing Arm Wall Mount JWD-V INSTALLATION Medium Flat Panel Dual Swing Arm Wall Mount The single swing arm wall mount is designed for mounting a medium sized flat panel display. The can swing out from, or fold against, the wall depending

More information

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe installation of MP40/50/60/70 mounting equipment on the anesthesia machine.

More information

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS

More information

DX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations

DX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3

More information

Flat Panel Dual Swing Arm Wall Mount (FWD-110) MSP-SA

Flat Panel Dual Swing Arm Wall Mount (FWD-110) MSP-SA INSTALLATION INSTRUCTIONS Flat Panel Dual Swing Arm Wall Mount (FWD-110) The dual arm wall mount was designed to support flat panel displays with 10 to 30 diagonal screens and weighing a maximum of 40

More information

Installation Instructions

Installation Instructions Installation Instructions For 4 foot / 1.2m Diameter Ultra-high Performance Antenna Model ADxxG-4-T2 Before Installation, please read the instructions carefully. This instruction guide covers the installation

More information

Wall Mount Bracket YM-81

Wall Mount Bracket YM-81 CN/JA/EN/DE/FR/ES/IT/SV/RU/PT/TR/NL/PL/FI/CS/NO/LT/TH/ID/MS/VI/TW/KO/AR Wall Mount Bracket YM-81 English User s Guide Deutsch Bedienungsanleitung Français Mode d emploi Español Italiano Svenska Português

More information

Mounts by. Model PMU50 PROJECTOR MOUNT. Simple to adjust no-tools required

Mounts by. Model PMU50 PROJECTOR MOUNT. Simple to adjust no-tools required Mounts by A division of David Engineering & Mfg. Inc. Model PMU50 PROJECTOR MOUNT Thank you for purchasing the PDR Projector mount with the exclusive Bayonet locking system. To ensure the correct usage,

More information

Pickup Box Utility Rack Package Installation (Instruction ID: )

Pickup Box Utility Rack Package Installation (Instruction ID: ) 017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation

More information

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING PLASMA TV WALL MOUNT TILT Universal (RGTU-210) S CAUTION CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION alerts you to the possibility

More information

INSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT

INSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT INSTALLATION GUIDE Model:B60 RECESSED IN WALL MOUNT Features: Installs between 16 (406mm) wood stud centers Mounting Pattern Compliance: VESA 100*100mm up to 600 x 400mm Level 5 degree horizontal adjustment

More information

INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110

INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 The KWE dual swing arm wall mount is designed to provide a broad range of viewing for Small

More information

Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV

Showpiece Cabinet Integrated Stand For 32 - 52 LCD HDTV Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV

More information

SmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide

SmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide SmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide WMK-034 This display kit mounts ViewSonic 46 Video Wall displays in a 3 wide by 3 deep landscape configuration. The frame

More information

Assembly Instructions for Model: VMPR1

Assembly Instructions for Model: VMPR1 Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP

More information

3 wide x 3 deep Video Wall Display Installation Guide

3 wide x 3 deep Video Wall Display Installation Guide HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame

More information

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe mounting of MP90 equipment on the anesthesia machine. WARNING: USE OF MOUNTING

More information

Rugged Ridge Engine Transmission Skid Plate JK

Rugged Ridge Engine Transmission Skid Plate JK Installation Time: 1-2 Hours Tools Required: Rugged Ridge Engine Transmission Skid Plate 2012-2017 JK Sockets: 16mm, 17mm, 18mm deep well Socket Wrench Wrenches: 16mm, 18mm Torque Wrench Drill ½ Drill

More information

MSP-DCCPGSU Large Screen Static Display Mount

MSP-DCCPGSU Large Screen Static Display Mount INSTALLATION INSTRUCTIONS Large Screen Static Display Mount The Large Screen Static Display Mount () is a quick disconnect mounting solution for large flat panel displays. The mount self-adjusts for the

More information

Installation Instructions

Installation Instructions Installation Instructions Ceiling Mount Bracket (for Low Ceilings) Model No. ET-PKR100S Thank you for purchasing this Panasonic product. To customers The Installation Instructions is intended for use by

More information

MSP-DCCPGTU Large Screen Tilt Display Mount

MSP-DCCPGTU Large Screen Tilt Display Mount INSTALLATION INSTRUCTIONS Large Screen Tilt Display Mount The Large Screen Tilt Display Mount is a quick disconnect mounting solution for large flat panel displays. The mount features infinite adjust ability

More information

INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL

INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL CMK Ceiling WARNING! The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor s weight. If it cannot,

More information

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done

More information

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series INSTALLATION INSTRUCTIONS Large Flat Panel Wall Mount Model: PRO-2000 Series PRO-2000 Series Wall Mount Features: Accommodates large flat screens weighing up to 200 lbs (90.7 kg). Mounting brackets adapt

More information

LCD MONITOR/TV WALL MOUNT

LCD MONITOR/TV WALL MOUNT INSTALLATION INSTRUCTIONS LCD MONITOR/TV WALL MOUNT DUAL DESK CLAMP (RFCD-110) S CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION

More information

Medium HoneyBadger Chase Rack Installation Instructions

Medium HoneyBadger Chase Rack Installation Instructions PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading

More information

**MOUNTING YOUR MONITOR

**MOUNTING YOUR MONITOR FPP72V200 72 FREE STANDING DISPLAY CART Assembly Instructions Hardware List Ref. Qty. Part No. Description AA 4 030-1128 1/4-20 UNC, 1 3/4 Socket Hd Screws BB 1 030-1129 5/8-11 UNC 1 3/4 Socket Hd Screw

More information

F l a t S c r e e n A R M S I n s t a l l a t i o n

F l a t S c r e e n A R M S I n s t a l l a t i o n ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)

More information

Installation Guide Guide d installation

Installation Guide Guide d installation Installation Guide Guide d installation Safety Instructions For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that ignores instructions in this guide

More information

INSTALLATION MANUAL ELPMBUNI

INSTALLATION MANUAL ELPMBUNI INSTALLATION MANUAL ELPMBUNI Warning Statements WARNING: WARNING: WARNING: WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN

More information

IN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.

IN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench. Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.

More information

LC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less

LC6X4WTM Security Wall Mount with Tilt for up to 60 Flat Screens with VESA 600mm x 400mm or less Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of

More information

MTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2

MTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2 MTS-SP100 RENOGY Pole Mount System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.2 Important Safety Instructions Please save these instructions. This manual contains important safety,

More information

Heavy Duty I-Beam Trolley

Heavy Duty I-Beam Trolley Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM

More information

A195B CEILING TV MOUNTING BRACKET Vesa Size : 200 x 200mm User Manual Notice d Utilisation

A195B CEILING TV MOUNTING BRACKET Vesa Size : 200 x 200mm User Manual Notice d Utilisation A195B CEILING TV MOUNTING BRACKET Vesa Size : 200 x 200mm User Manual Notice d Utilisation Thank you for purchasing an Electrovision bracket, please read these instructions carefully and leave with the

More information

Arc Trainer Main Frame Assembly

Arc Trainer Main Frame Assembly Arc Trainer Main Frame Assembly Kit No. 610AK019-4 Kit No. 630AK019-4 NOTE: This instruction sheet describes how to replace the main frame assembly in the Arc Trainer 610A. Tools Required 3/16 Allen wrench

More information

PROFILE Flat Panel Console System Installation Manual

PROFILE Flat Panel Console System Installation Manual PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double

More information

Installation Instructions

Installation Instructions Installation Instructions Optima LED 8 Double-Sided StretchLite Perimeter Lit Graphic Display Line Voltage Connector Optima LED DS5 (Double-sided StretchLite Graphic Display) with Graphics Corner Bracket

More information

EPPA2-KIT DUAL MONITOR ARM CONVERSION

EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment

More information

Pole Mount Installation Guide

Pole Mount Installation Guide Pole Mount Installation Guide (No Fine Adjustment) 495R Billerica Ave. North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 Email: sales@radiowaves.com www.radiowaves.com IMPORTANT!

More information

Setup. The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on series tables.

Setup. The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on series tables. Faraday CageSetup, 2017 Setup The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on 63-500 series tables. Cage with a base plate for use on a

More information

Installation Guide. English. English

Installation Guide. English. English Installation Guide Safety Instructions For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the

More information

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320 INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays The FMA-220 and FMA-320 pivot array allow both horizontal and vertical display pitch adjustment. The pitch adjustment range is 30 (15 up / 15

More information

Outdoor Enclosure. VIVOTEK Pan/Tilt & Fixed Dome Series. Installation Guide

Outdoor Enclosure. VIVOTEK Pan/Tilt & Fixed Dome Series. Installation Guide VIVOTEK Pan/Tilt & Fixed Dome Series Outdoor Enclosure Using AE-131/-132 Outdoor Enclosure, AE-151 Outdoor Enclosure, AM-114 Pendant Head (outdoor), AM-116 and AM-117 Pendant Pipes, AM-221 Gooseneck, AM-212

More information

C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS

C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS Thank you for your purchase of the C4 Fabrication s 5th Gen 4Runner Rock Sliders! This product was carefully crafted to ensure a perfect

More information

Installation Guide. English. English

Installation Guide. English. English Installation Guide Safety Instructions For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the

More information

Installation and Assembly: Ceiling mount for LCD screens up to 29"

Installation and Assembly: Ceiling mount for LCD screens up to 29 Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and

More information

DRAWER Mitsubishi pajero lwb

DRAWER Mitsubishi pajero lwb DRAWER Mitsubishi pajero lwb SSDS601 / SSMP001 INSTALL TIME: 45 mins Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

CNC Router Parts PRO Machine Kit Cable Track Installation Instructions

CNC Router Parts PRO Machine Kit Cable Track Installation Instructions 1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the

More information

Dual Arm Tilt LCD Mount

Dual Arm Tilt LCD Mount Installation Manual model # 51324 M o u n t i n g S y s t e m s Dual Arm Tilt LCD Mount Fits Displays 13 to 32 Supports Up to 50 lbs (23 kgs) Projection from Wall from 3 to 17 Meets VESA Standards 50/75/100,

More information

PWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT

PWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT UNIVERSAL FLAT PANEL MOUNT IN-PWMT210.R0 TABLE OF CONTENTS Warning Statements 3 Parts List 4 Installation Tools 4 Locating the Center of the 5 Mounting Bracket Positioning 5 Securing the Mounting Brackets

More information

LCD DISPLAY MOUNT

LCD DISPLAY MOUNT I N S T A L L A T I O N M A N U A L 38-804769-01 LCD DISPLAY MOUNT WWW.CHRISTIEDIGITAL.COM Contents - Assembly drawing - Securing the bottom wall plate - Fine tune adjustments - Marking the top plate mounting

More information

Triple Bypass System

Triple Bypass System Triple Bypass System ASSEMBLY INSTRUCTIONS TRIPLE BYPASS SYSTEM Recommended Tools Drill with 1/4 Drill Bit and Phillips Screw Bit 7/16 Combination Wrench Socket Wrench with 7/16 and 9/16 Socket Level Tape

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

SINCE 1922 P UBLICATION N O

SINCE 1922 P UBLICATION N O SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.

More information

BOX-117 E-Z-Go RXV Utility Box Mounting Kit Installation Instructions

BOX-117 E-Z-Go RXV Utility Box Mounting Kit Installation Instructions BOX-117 E-Z-Go RXV Utility Box Mounting Kit Installation Instructions Contents of BOX-117 Utility Box Mounting Kit: a (1 ea.) Utility Box Support Frame, Driver Side b (1 ea.) Utility Box Support Frame,

More information

Tilting, Swiveling & Rotating Flat Panel Wall Mount

Tilting, Swiveling & Rotating Flat Panel Wall Mount Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory FABRIC REAR DOORS (5P) P/N 0SR90-HL4-211B (BLACK) P/N 0SR90-HL4-211C (CAMO) Application SXS1000M5P/M5D Honda Dealer: Please give a copy of these instructions to your

More information

Installation and Assembly: LCD UPRIGHT STAND FOR PEDESTAL CABINETS

Installation and Assembly: LCD UPRIGHT STAND FOR PEDESTAL CABINETS Installation and Assembly: LCD UPRIHT STAND OR PEDESTAL CABINETS Part Number 49-5672-30 EATURES Take all of the guess work out of selecting the proper stand for your pedestal cabinets. This custom stand

More information

PART #MSP-DCCST Flat Panel Tilt Mount

PART #MSP-DCCST Flat Panel Tilt Mount INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees

More information

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS The Universal Interface Bracket provides a solution for simplifying inventory of RPA and RPM series mounts and SLB/SLM projector brackets.

More information

Pro Ski / Snowboard & Fishing Rod Carrier

Pro Ski / Snowboard & Fishing Rod Carrier Pro Ski / Snowboard & Fishing Rod Carrier ENG RRAC123 10 min READ ME! Thank you for purchasing a Front Runner Pro Ski / Snowboard & Fishing Rod Carrier. Before you start, take a moment to familiarize yourself

More information

Low Headroom Rear Mount TorqueMaster

Low Headroom Rear Mount TorqueMaster Low Headroom Rear Mount Supplemental Instruction Insert This supplemental installation instruction is to be used as a supplement to the main Installation Instruction and Owner s Manual provided with the

More information

Replacement of Drive Nuts in TTL/Adding Drive Nut Safety Bracket

Replacement of Drive Nuts in TTL/Adding Drive Nut Safety Bracket Replacement of Drive Nuts in TTL/Adding Drive Nut Safety Bracket The bronze drive nuts in the TrusLift are the main lifting components, working in conjunction with the drive screw, gear reducer and

More information

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42-55 Page 20 SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management

More information