MIT Product Demonstration
|
|
- Bruno Bennett
- 5 years ago
- Views:
Transcription
1 MIT Product Demonstration ACPA 55 th Annual Meeting CPU 4 Presented by Garry Aicken, P.E. North American Distributor for MIT Demonstrate the New Rail Less Dowel Bar Scanner - MIT-DOWEL-SCAN Demonstrate Pavement Thickness Gauge - MIT-SCAN-T3 1
2 MIT DowelSCAN Faster The MIT-DOWEL-SCAN system provides nondestructive testing of dowel bars in plain concrete pavements as soon as you can walk on the concrete. Faster Set-Up in the Field No rails to assemble or move Truly a single person operation pick up the laser & push the device to the next joint Faster joint relocation & alignment allowing more completed tests per hour 2
3 MIT DowelSCAN Simpler Configuration Improved design eliminating system components. Hard wire connection, removable battery. Single Transport Case Integrated Data Collector attaches to the scanner Easier Battery Charging - Data Collector includes scanner battery detaches for charging. Real Time Results: magnetic image map is generated as the joint is scanned. Quantitative results shown immediately after scanning the joint 3
4 MIT DowelSCAN Accurate The MIT-DOWEL-SCAN system is still very accurate & repeatable Provides depth, translations, deviations, skew and tilt to within tenths of an inch precision. MIT-DOWEL-SCAN has 10 sensors and a laser to guide the unit along the joint with same great accuracy and repeatability Easier transfer to MagnoProof 5 with USB A port on the data collector. Post test data processing is via a 10 sensor/signal version of MagnoProof 5 Meets ASTM E
5 MIT DowelSCAN Laser Alignment Joint alignment is fast: Set the AA battery powered laser on the edge of the pavement Align the scanning unit with the laser using the green lights in front. Red lights appear when not aligned Retract transport wheels 5
6 MIT DowelSCAN Automatic Alignment Scanning Unit automatically maintains alignment during the test. The operator does not steer the device during the test Allows observation of the real time mapping 6
7 MIT DowelSCAN Product Improvements Firmware revision to address bright sunlight interfering with alignment Modified encoder configuration to maintain the 1mm gap with the wheel Laser battery case reinforcement Improved transport case foam Increased the thickness of the laser foot Increased thickness of cable support clamps Working on reducing the number of cover screws that shear off during shipment Supply Chain improvements will reduce lead time 7
8 MIT SCAN-T3 - Thickness Gauge Meets AASHTO Standard Test Method T Pavement Thickness by Magnetic Pulse Induction eliminates cores for thickness Replaces the popular MIT SCAN-T2 Very accurate less than +/- 3/16 on 13 pavement ASTM Standard in Balloting should be issued Spring of Includes reflector material specifications 8
9 MIT SCAN-T3 New Features Added GPS can return to the reflector location quickly Added additional sideways search bar - to assist in locating reflectors quickly Replaced the keypad with a mouse button Can automatically detect reflector size & type One piece design prevents accidental interchanging of head and main body. 9
10 MIT SCAN-T3 New Software Improved firmware provides alerts including moving too fast & starting to far from the reflector Allows preloading of test location descriptions New software that produces reports and performs statistical analysis of multiple tests. Software allows use of inches to X.X5 or X.X0 10
11 MIT SCAN-T3 Other Applications Search mode used to locate center of dowel bars for saw cuts Cement Treated Base material thickness measurements Verify tie bars installed. Allows counting of tie bars Lift thickness of base materials 11
12 MIT SCAN-T3 Wide Acceptance Used on Projects in the Following States: Iowa Wisconsin Minnesota Illinois Tollway Washington North Dakota South Carolina Colorado Florida Alabama West Virginia Pennsylvania Idaho South Dakota Nevada Utah Arizona North Carolina 12
13 MIT SCAN2-BT Hardware Upgrade Replace Casio IT-600 with IT Bigger Screen 2. Brighter Screen 3. Better Keypad 13
14 MagnoProof 5 Software MagnoProof 5 Software Advantages 1. Easier Data Transfer Function performed within MagnoProof no longer need to work within Windows Mobile Device to move files 2. Improved Data Analysis Tool Improves identification of influenced areas and suggest possible causes 3. Better Presentation of Results Graphics & Report Table are shown in the same window 14
15 Easier Analysis with a Single Screen Visualization Screen: Signal Chart Intensity Map Modeled vs. Measured Signal Tabular Results Project Information 15
16 Batch Report Statistical Analysis Vertical Misalignment Results by Bar Average Depth Results by Bar as a X-Section (Shows each bar, plan elevation, & average depth ) Horizontal Misalignment Results by Bar Depth Results by Bar Total Misalignment Results by Bar (Combination of Horizontal & Vertical Misalignments) Side Shift Results by Bar 16
17 Added USA Services Dowel Bar Scanner Verification Services for older devices including the original SCAN2 to certify that system is still within manufacturer s tolerances In conjunction with MIT capable of adjusting calibration settings to return devices to manufacturer s tolerances. (Corrects drift in older devices) Calibrating MIT SCAN-T2 & T3 devices. Provide on-site comparison of devices to confirm that systems are accurate. Provide on-site Operator Training & Certification program MIT SCAN-T2/T3 reflectors made in the USA with standard commercially available materials 17
Dowel Alignment: Measurement and Impacts on Pavement Performance
Dowel Alignment: Measurement and Impacts on Pavement Performance prepared by: Mark B. Snyder, Ph.D., P.E. Vice-President, ACPA-PA Chapter for: ACPA s 2012 Annual Meeting Concrete Pavement University November
More informationDowel Bar Standardization. NC^2 Fall Meeting St. Louis, MO
Dowel Bar Standardization 2001 Universal Basket Continuation of discussion from NC^2 Spring meeting Results of Dowel Bar Questionnaire Results of Dowel Bar Questionnaire Dowel Bar Diameters 6.0" 6.5" 7.0"
More informationDowel Bar Standardization. NC^2 Spring Meeting Savannah, GA
Dowel Bar Standardization NC^2 Spring Meeting Savannah, GA Dowel Bar Task Force Maria Masten, Minnesota DOT Mark Snyder, ACPA Pennsylvania Matt Zeller, Concrete Paving Association of Minnesota Tom Cackler,
More informationMagnetic Imaging Technology
Magnetic Imaging Technology 200 Virginia Concrete Conference H. Thomas Yu State of the Practice " The importance of proper dowel alignment is widely recognized, but it could not be verified effectively
More informationEvaluation of Dowel Bar Inserter Practices in PCC Pavements with Magnetic Tomography Technology
University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Nebraska Department of Transportation Research Reports Nebraska LTAP 12-2016 Evaluation of Dowel Bar Inserter Practices
More informationMark B. Snyder, Ph.D., P.E.
ACPA s New Dowel Alignment Specification Mark B. Snyder, Ph.D., P.E. Vice-President, ACPA Pennsylvania Chapter Presentation Sources: Robert Rodden, ACPA National Tom Yu, FHWA Dowel baskets Improper handling
More informationDowel Bar Alignment and Location for Placement by Mechanical Dowel Bar Insertion
Dowel Bar Alignment and Location for Placement by Mechanical Dowel Bar Insertion January 7, 2013 Scope, Background and Applicability This guide specification is directly applicable to 18 in. (457 mm) long,
More informationInitiating Cracks in PCC Pavements. Malcolm K. Lim, PE
Initiating Cracks in PCC Pavements by Malcolm K. Lim, PE Technology Transfer Concrete Consortium (TTCC) and National Concrete Consortium (NCC) Fall 2009, St Louis, MO Better Performance Through Innovative
More informationT2006OPT T523opt T522opt snc T521opt snc AUTOMATIC PROGRAMMABLE CUT-OFF SAW
T2006OPT T523opt T522opt snc T52opt snc AUTOMATIC PROGRAMMABL CUT-OFF SAW T2006 OPT Automatic cut off saw for defecting and optimized cutting. Feeding by pusher available in 4 or 6 meters useful length.
More informationDouble Bar Plate Dowels for Saw-Cut Contraction Joints
Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of
More information2012 PURDUE ROAD SCHOOL Session 56. JW Stanger, P.E. Rieth-Riley Construction Co., Inc.
2012 PURDUE ROAD SCHOOL Session 56 JW Stanger, P.E. Rieth-Riley Construction Co., Inc. GPS Components Base Stations 3D-GPS Rover Pack 3D-GPS Machine Control 3D-millimeter GPS Truck Mounted GPS Using GPS
More informationDesign and Construction of Highway Pavement Joint Systems
Design and Construction of Highway Pavement Joint Systems Dowel and Tie Bar Design Considerations Part 2 Mark B. Snyder, Ph.D., P.E. Engineering Consultant to the American Concrete Pavement Association
More informationOPERATING PAVEMENT PROFILOGRAPH AND EVALUATING PROFILES
Test Procedure for OPERATING PAVEMENT PROFILOGRAPH AND EVALUATING PROFILES Texas Department of Transportation TxDOT Designation: Tex-1000-S Effective Date: August 1999 1. SCOPE 1.1 This method covers the
More information4.1. Foremen 4.2. Concrete plant manager 4.3. Concrete plant operator 4.4. Personnel performing saw cutting and joint sealing
10-1. JOINTED PLAIN CONCRETE PAVEMENT GENERAL Summary This work includes constructing jointed plain concrete pavement. Comply with Section 40, "Concrete Pavement," of the Standard Specifications. Submittals
More informationVideo Wall Installation Instructions 2W X 3H, 3W X 3H
Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...
More informationRaise Structures an Additional 5 to 20 Feet
PATENTED Structure Lifting System NO Line Outage Required Most Economical Solution Low Impact Equipment Field Training Included with Equipment Rental Capitalized Expenditure No Loss of Structure Reliability
More informationIs the scanned image stored as a color, grayscale, or black and white image? If applicable, what resolution is used?
Topic: Trademarks, Trade names, Service marks Question by: Mandy Harlan/LA s IT staff Jurisdiction: Louisiana Date: 25 August 2010 Jurisdiction Question(s) Manitoba Corporations Canada Alabama Alaska Arizona
More information45 CUTTING HEAD TILE SAW-BLADE ALIGNMENT PROCEDURE
The of the MK-770 may become misaligned with the Cutting Head of the Tile Saw over time. Should misalignment occur, perform the following steps to realign the Tile Saw. NOTE: If alignment problems are
More informationPERFORM WITH PRECISION WELDED DOWEL ASSEMBLY LOAD TRANSFER PRODUCTS CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
WELDED DOWEL ASSEMBLY LOAD TRANSFER PRODUCTS PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Transfers Loads for Pavement Durability Today the modern Portland Cement Concrete pavements
More informationTable 5G-2.01: Transverse Joint Requirements. Transverse Joint Type 6 C 12 7 C 15 8 CD CD CD 1 20
Design Manual Chapter 5 - Roadway Design 5G - PCC Pavement Joints 5G-2 Types of Joints A. Jointing PCC pavement joints are necessary primarily to control the location of cracks that occur from natural
More informationInstallation Guide. Suitable for: OEM Integration OEM Installation Retro Fit Installation
Installation Guide Suitable for: OEM Integration OEM Installation Retro Fit Installation DTI AngleBlaster release 1.1 DTI 2010 Overview Angleblaster Installation Guide A-1 To obtain the best accuracy from
More informationDisplay Advertising Networks - National Rate Sheet
Alabama 2x2 $1,000 127 893,708 Monday, 5pm North 2x2 $400 46 393,125 Central 2x2 $400 40 302,717 South 2x2 $400 41 197,866 2x2-2 regions $750 Retail Network 2x3: 1 region $600, 2 regions, $1,100, statewide
More informationAutomatic hardness testing devices
Automatic hardness testing devices The measure of hardness, applied to rubber and plastic, is a measure of stiffness obtained from an indentation test. An indentor is pressed into the sample under a given
More informationWALLY ROTARY ENCODER. USER MANUAL v. 1.0
WALLY ROTARY ENCODER USER MANUAL v. 1.0 1.MEASUREMENTS ANGULAR POSITIONING a. General Description The angular positioning measurements are performed with the use of the Wally rotary encoder. This measurement
More informationABCDE. TechBrief. Best Practices for Dowel Placement Tolerances
TechBrief The Concrete Pavement Technology Program (CPTP) is an integrated, national effort to improve the long-term performance and cost-effectiveness of concrete pavements. Managed by the Federal Highway
More informationM-0418 REV:0
1 of 5 This specification sets forth the minimum requirements for purchase and installation of an aboveground Radar Detection Device (RDD) system for a real-time, stop bar vehicle-detection system that
More informationConstruction Tolerances - The following tolerances apply to cast-in-place structures:
00540.40(b) Construction 00540.40 Tolerances - The following tolerances apply to cast-in-place structures: (a) Foundation Footings: (1) Lateral Alignment: Actual (as cast) location of the center of gravity:
More informationEffect of Dowel Bar Embedment Length on Joint Load Transfer Efficiency of MnROAD Concrete Pavement Test Cells
Effect of Dowel Bar Embedment Length on Joint Load Transfer Efficiency of MnROAD Concrete Pavement Test Cells Thomas R. Burnham, P.E. Abstract It is well understood that for heavily loaded concrete pavements,
More informationUNITED STATES. United We Stand Flag Stamp EDNA FERBER DIE CUT X ON 34 C. Washington. Self-Adhesive Booklet Stamps
United We Stand Flag Stamp Distinguished Americans SELF-ADHESIVE BOOKLET STAMP DIE CUT 10.50 X 10.75 ON 2 OR 3 SIDES EDNA FERBER 83 C Regular Stamp Washington Self-Adhesive Booklet Stamps PERFORATED 11.25
More informationPENTRUDER 8-20 HF 22KW/30HP WALL SAW (MAX BLADE DIAMETER - 79, WILL TAKE 39 BLADE OUT OF CUT) PART NUMBER DESCRIPTION DETAILS MSRP
PENTRUDER 8-20 HF 22KW/30HP WALL SAW (MAX BLADE DIAMETER - 79, WILL TAKE 39 BLADE OUT OF CUT) 582090 8-20 HF 30 HP WALL SAW BASE PACKAGE $97,745.00 8-20 HF WALL SAW BASE PACKAGE INCLUDES THE FOLLOWING
More informationDEFENDER USER MANUAL
Where The Money Meets The Machine PO Box 5128, 400 Regency Drive, Glendale Heights, IL 60139-5128 VOICE: 630/924-7070 1-800-323-6498 FAX: 630/924-7088 DEFENDER USER MANUAL Interchangeable with existing
More informationScanner Basic Configuration Part-No. 21R
Scanner Basic Configuration Part-No. 21R09-00-101-00 3D Laser Scanner Part-No. 21R09-00-001-00 laser transmitter & receiver front end motorized mirror scanning mechanism signal processing electronics with
More informationResponses to Concrete Specifications Survey with Summary (2011)
Responses to Concrete Specifications Survey with Summary (2011) In March of 2011, a survey was sent out by Manitoba Infrastructure and Transportation (MIT) Materials Engineering Branch to poll Department
More informationOHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO
OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO 43216-0899 July 20, 2012 To: Users of the Standard Bridge Drawings From: Tim Keller, Administrator, Office of Structural
More informationThickness measuring device MIT-SCAN-T3
Deze informatie zal binnenkort in het Nederlands worden geplaatst Thickness measuring device MIT-SCAN-T3 Description of the measuring method April 2016 Asintra Asphalt innovation & training MIT Mess- und
More informationDowel Alignment Considerations and Specification Update
Dowel Alignment Considerations and Specification Update November 8, 2016 Mark B. Snyder, Ph.D., P.E. American Concrete Pavement Association Staff Consultant Presentation Overview What are the sources of
More informationProcess Metrix Mobile Laser Contouring System (LCS) for Converter Lining Thickness Monitoring
Process Metrix Mobile Laser Contouring System (LCS) for Converter Lining Thickness Monitoring Process Metrix 6622 Owens Drive Pleasanton, CA 94588 USA Process Metrix A History of Instrumentation Development
More informationCorrosion-Resistant Coated Dowel Bars
Standard Specification for Corrosion-Resistant Coated Dowel Bars AASHTO Designation: M 254-06 (2010) American Association of State Highway and Transportation Officials 444 North Capitol Street N.W., Suite
More informationFor questions on financing visit
Gammill Machines & Longarm Quilting (Serving Virginia, West Virginia, Maryland, Pennsylvania, Delaware, New Jersey and Washington, DC) For questions on financing visit www.financeyourgammill.com THE CHARM
More informationLaser Technology Improves and Makes Easier Post-Process Measuring On Centreless Grinders. Application Note. A. Spizzamiglio - Aeroel - Italy SUMMARY:
Application Note Laser Technology Improves and Makes Easier Post-Process Measuring On Centreless Grinders. SUMMARY: Introduction Laser Technology sets new performance standards Application for centreless
More informationDigital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall
Digital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall dimensions USB or RS-232 connectivity Software development
More informationDowel Bar Alignment and Location for Placement by Mechanical Dowel Bar Insertion
Dowel Bar Alignment and Location for Placement by Mechanical Dowel Bar Insertion Scope, Background and Applicability August 14, 2013 This guide specification is directly applicable i to 18 in. (457 mm)
More informationNondestructive measurement of layer thickness with the MIT-SCAN-T2
Nondestructive measurement of layer thickness with the MIT-SCAN-T2 MIT reflector handbook for MIT-SCAN-T2 customers Issued April 2013 MIT Mess- und Prüftechnik GmbH Gostritzer Str. 63 01217 Dresden, Germany
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationApplication Brief TROXLER MODEL 3450
Application Brief TROXLER MODEL 3450 Roadreader Plus Nuclear Moisture Density & Thin Layer Gauge May 2007 Introduction The Troxler Model 3450, Roadreader Plus, nuclear moisture / density gauge offers the
More informationMoving Test - MT3000
Moving Test - MT3000 Three-Phase Portable Test System Keep ahead with Modular Design The Modular Concept The MT3000 is based on a real modular design concept to provide the greatest possible flexibility
More informationL-742 Ultra-Precision Roll Alignment System for Printing Presses/Paper Machines
ujijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijijiji Application Notes Roll Alignment System Recommendations Printing Presses/Paper
More informationTHE 3905 CENTURY CLUB, INC POINT AWARD APPLICATION (AND SUBSEQUENT 1000-POINT INCREMENTS) (EACH BAND/MODE SEPARATELY) (NOT ENDORSABLE)
THE 3905 CENTURY CLUB, INC. 2000-POINT AWARD APPLICATION (AND SUBSEQUENT 1000-POINT INCREMENTS) (EACH BAND/MODE SEPARATELY) (NOT ENDORSABLE) The requirements for the 2000-Point Award are simple. You just
More information2. Remove from the Standard Plate manual: Standard Plate Index, Sheets 1-4 of 4, Numerical Index of Standard Plates (August 31, 2012)
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management & Technical Support, Design Support Section TRANSMITTAL LETTER NO. (12-04) MANUAL: Standard
More informationCertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS. Fence Installation Guide 3', 4' & 6' High
CertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS Fence Installation Guide 3', 4' & 6' High INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers
More informationInnov-ís 4000D/4000 PREMIUM PACKAGE
Innov-ís 4000D/4000 PREMIUM PACKAGE Version 3.0 Upgrade Kit Operation Manual Before using this upgrade kit, be sure to read this Operation Manual for information on its correct use. CONTENTS Before You
More informationCARAT 930/950. Hardness Testing & Analysis CARAT 930 / 950
STABLE CONSTRUCTION The vibration-damped cast aluminum body comprises a robust basis for the high load-bearing Carat table with automatic X/Y axis and automatic Z axis with 8-times objective revolver (LED
More informationMobrey Gauged Head Verification Device (HVD)
Quick Installation Guide Mobrey HVD Mobrey Gauged Head Verification Device (HVD) Start The Mobrey HVD Step 1: Installation Step 2: Operating The HVD End www.emersonprocess.com Mobrey HVD Quick Installation
More informationGPR SYSTEM USER GUIDE AND TROUBLESHOOTING GUIDE
GPR SYSTEM USER GUIDE AND TROUBLESHOOTING GUIDE Implementation Report 5-4414-01-1 Project Number 5-4414-01 Subsurface Sensing Lab Electrical and Computer Engineering University of Houston 4800 Calhoun
More informationZip Block MODEL ZB INSTALLATION INSTRUCTIONS
Zip Block MODEL ZB 100-400 INSTALLATION INSTRUCTIONS 12BT EXPOSED SURFACE SEAL WIDTH Zip Block SEAL 3/4" ± 1/8" [19.05mm ± 3.18mm] BLOCKOUT EDGE 3 1/2" [88.90mm] MAXIMUM BLOCKOUT NOMINAL JOINT WIDTH EPOXY
More informationTECHNICAL MANUAL. OPTIMAJOINT Free Movement Joint. Free Movement Joint System for Heavy Traffic
TECHNICAL MANUAL OPTIMAJOINT Free Movement Joint Free Movement Joint System for Heavy Traffic Version: PEIKKO GROUP 12/2018 OPTIMAJOINT Free Movement Joint Free Movement Joint System for heavy traffic
More informationMate Pilot. Turret Calibration System. Mate Tooling Lasts Longer
Superior Solutions For Sheet Metal Fabricators Mate Pilot Turret Calibration System New! mate.com/pilot Mate Tooling Lasts Longer Mate Pilot Turret Calibration System Introducing the Mate Pilot Turret
More informationCompleteness of Birth Registration
Vol. 33 A,S Completeness of Birth Registration in the United States in 1940 ROBERT F. LENHART, M.S.P.A. Chief, Vital Statistics Consulting Service, Division of Vital Statistics, Bureau of the Census, Suitland,
More informationPLK CJ PRODUCT INSTRUCTION PI002 REV Page 1
PLK One Shot Crucible Weld Kit PLK Kit Components CJ One Shot Crucible PLK CJ PRODUCT INSTRUCTION PI002 REV 3 270807 Page 1 PLK The Complete Welding Process The All New Railtech PLK-CJ welding process
More informationINSTRUCTIONS Crown Molding and Trim Protractor Used to cut trim lying flat
Wixey TM MODEL CJ4000 INSTRUCTIONS Crown Molding and Trim Protractor Used to cut trim lying flat Measures and calculates the compound miter and bevel angles for cutting crown molding and trim. Features:
More informationIG-2500 OPERATIONS GROUND CONTROL Updated Wednesday, October 02, 2002
IG-2500 OPERATIONS GROUND CONTROL Updated Wednesday, October 02, 2002 CONVENTIONS USED IN THIS GUIDE These safety alert symbols are used to alert about hazards or hazardous situations that can result in
More informationFlanged Dowel Box. Load Transfer System INDUSTRIAL SLAB ON GROUND
Flanged Dowel Box INDUSTRIAL SLAB ON GROUND Designed for construction joints in Post Tension or large shrinkage specifications Large lateral movement and expansion capacity Eliminates the need to drill
More informationRPLIDAR A1. Introduction and Datasheet. Low Cost 360 Degree Laser Range Scanner rev.2.1. Model: A1M8. Shanghai Slamtec.Co.
www.slamtec.com 2018-02-05 rev.2.1 RPLIDAR A1 Low Cost 360 Degree Laser Range Scanner Introduction and Datasheet Model: A1M8 Shanghai Slamtec.Co.,Ltd Contents CONTENTS... 1 INTRODUCTION... 3 SYSTEM CONNECTION...
More informationSCANNING METHOD. Olson Instruments Impact Echo Scanner. incorporating source and receiver. Overlay. Sound joint between. overlay and bridge deck
IE Method N D E I M P A C T E C H O S C A N N I N G A PPLICATION Impact Echo (IE) investigations are performed to assess the condition of slabs, beams, columns, walls, pavements, runways, tunnels, and
More information# Made In USA. Simple GPS Tracker Parts List. Needed Tools and Materials
Needed Tools and Materials #09245 Made In USA Compatible Ebay (to mount electronics to) Drill and Screwdriver (for mounting Transmitter to ebay) Compatible Battery (for powering Airborne Transmitter) Optional
More informationREFERENCE GUIDE FOR THE SOIL COMPACTOR ANALYZER
REFERENCE GUIDE FOR THE SOIL COMPACTOR ANALYZER by Stephen Sebesta Assistant Research Scientist Texas Transportation Institute Wenting Liu, P.E. Associate Research Engineer Texas Transportation Institute
More informationPower Generation. Application Notes
1. Application Notes Power Generation System Recommendations Turbines Split-Joint Flatness Rotating Equipment L-705 Turbine Alignment System L-740 Leveling Laser System S-680 5-Axis Shaft Alignment System
More informationJVI Vector Connector
The JVI Vector Connector User Guidelines 1 of 11 INTRODUCTION JVI designed the Vector Connector for use as shear and alignment connections between precast concrete elements such as double-tee flanges,
More informationTwin-Wall Double Swinging Door Kit
115021 Twin-Wall Double Swinging Kit READ THIS DOCUMENT BEFORE YOU BEGIN Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable
More informationDigital Microscope. User Manual
Digital Microscope User Manual Features The digital microscope provides 10~200X adjustable magnification range. The build-in high-performance white LED can illuminate the object without using any auxiliary
More informationRD1000 Ground Probing Radar
RD1000 Ground Probing Radar CONTENTS Product Introduction Product Features Competitor Analysis Customers Models, Pricing & Availability Promotional Material Practical Demonstration What to do now Summary
More informationStormTrap Guide Specification. StormTrap SingleTrap on Pad Foundation Groundwater BELOW Invert Revised 11/21/18
StormTrap Guide Specification StormTrap SingleTrap on Pad Foundation Groundwater BELOW Invert Revised 11/21/18 This product guide specification is written according to the Construction Specifications Institute
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationFixturlaser EVO. Fixturlaser EVO QUICK TIPS VibrAlign, Inc.
Fixturlaser EVO 2014 VibrAlign, Inc. QUICK TIPS PRE-ALIGNMENT 1. Rough Alignment Vertical: Place scale or straightedge on highest hub and raise or lower the movable shaft to within 20 mils (0.020 ) of
More informationGlass Fiber Reinforced Polymer (GFRP) Dowel Bars - Aslan 600
Glass Fiber Reinforced Polymer (GFRP) Dowel Bars - Aslan 600 August 16, 2011 Aslan 600 Glass FRP Dowel Bars are used as a Load Transfer device between joints in concrete slabs. They provide a mechanical
More information2008 Statistics and Projections to the Year Preliminary Data
2008 Statistics and Projections to the Year 2025 2009 Preliminary Data Presented at the 92nd Annual Convention Honolulu, Hawaii August 4-7, 2010 Updated October 2010 Prepared by: Market Research & Statistics
More informationS6 User s Manual USER S MANUAL ver. 1.0
S6 User s Manual SKEETER - 1U LOW PROFILE SOLUTION Table of Contents Tabletop Configuration 2 Tabletop Configuration Accessories 4 Slide Configuration 5 slide configuration accessories 7 rack Mount configuration
More informationPick 3 Lottery 7 DAY NUMBERS-18. Numbers Good for the Week of Jan 17 Jan 23 (2016) AANewYork
1 Pick 3 Lottery 7 DAY NUMBERS-18 Numbers Good for the Week of Jan 17 Jan 23 (2016) AANewYork There were 47 Summary Report hits in Book 18. I thought it would be very interesting to see where these hits
More informationUSER S MANUAL. Horizontal inclinometer system Model TES-AN-25H
USER S MANUAL Horizontal inclinometer system Model TES-AN-25H Doc. # WI 6002.82 Rev. 01 Printed May 2011 System description & method statement for installing ABS casing (Model TES-AN-25H horizontal inclinometer
More informationFixturlaser XA. Fixturlaser XA QUICK TIPS VibrAlign, Inc.
Fixturlaser XA 2013 VibrAlign, Inc. QUICK TIPS PRE-ALIGNMENT 1. Rough Alignment Vertical: Place scale or straightedge on highest hub and raise or lower the movable shaft to within 20 mils (0.020 ) of the
More informationThe Need for Improved Specifications on Dowel Bar Placement Tolerance
Yu and Tayabji 1 The Need for Improved Specifications on Dowel Bar Placement Tolerance H. Thomas Yu (tyu@ctlgroup.com) Shiraz D. Tayabji (stayabji@ctlgroup.com) CTLGroup 9030 Red Branch RD, Suite 110 Columbia,
More informationFIXTURLASER NXA Ultimate
FIXTURLASER NXA Ultimate Welcome to our world. Since the very beginning in 1984, ACOEM AB has helped industries throughout the world to achieve more profitable and sustainable production. We have reached
More informationSUMMARY SHEETS OF BAR COUPLER CONNECTIONS
APPENDIX A SUMMARY SHEETS OF BAR COUPLER CONNECTIONS NCHRP 12 88 Connection Evaluations Appendix A A 1 APPENDIX A SUMMARY SHEETS OF BAR COUPLER CONNECTIONS NCHRP 12 88 Connection Evaluations Appendix
More informationMAKO TM CASH DISPENSER
MAKO TM CASH DISPENSER PEDESTAL INSTALLATION GUIDE VERSION 2.0 TDN 0702-000 2/99 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,
More informationWELDING POSITIONING EQUIPMENT
WELDING POSITIONING EQUIPMENT It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT designs
More informationMaterial Parameter Measurement (MPM)
Material Parameter Measurement (MPM) C4 Software Module and Accessory of the KLIPPEL ANALYZER SYSTEM (Document Revision 1.3) FEATURES Measure E modulus and damping Evaluate raw materials Specify loudspeaker
More information# Made In USA. Simple GPS Tracker Parts List
Needed Tools and Materials Compatible Ebay (to mount electronics to) Drill and Screwdriver (for mounting Transmitter to ebay) Compatible Battery (for powering Airborne Transmitter) Optional Tools / Finishing
More informationISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK 01 SME SME SME
1. Summary The still pipe used with Rosemount 5900 LPG/LNG antenna is not supplied by RTR, but is to be manufactured by the customer according to the RTR drawing D9240041-910 or D7000001-466. Additional
More informationSTATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENT SUBMITTAL AND APPLICATION REQUIREMENTS FOR ProVAL PAVEMENT SMOOTHNESS SOFTWARE
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENT 1110 SUBMITTAL AND APPLICATION REQUIREMENTS FOR ProVAL PAVEMENT SMOOTHNESS SOFTWARE April 18, 2014 1110.01 Scope 1110.02 Acquiring software 1110.03
More informationXenon 1902g-bf. Battery-Free Wireless Scanner FAQs BATTERY-FREE ALERTS. Why don t I see any alerts? Why don t alerts happen while I am scanning?
Xenon 1902g-bf Battery-Free Wireless Scanner FAQs BATTERY-FREE ALERTS Why don t I see any alerts? Alerts only happen when the following conditions have been met: The discharge level specified for a given
More informationSM-RAZOR-ART2-L / SM-RAZOR-ART2-XL
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done
More informationMicro IRHD Laser revolution
Micro IRHD Laser revolution Micro-IRHD Hardness tester with laser centring device and rotating sample holder for the automatic serial measure of O-rings and small rubber parts The instruments is supplied
More informationRail Coping Sled Instructions
Rail Coping Sled Instructions GENERAL SAFETY WARNINGS This tool is designed for specific applications as defined in the instructions and should not be modified and/or used for any other applications. Before
More informationAdding Digital Readout To a Thickness Planer
Digital Readout on a Planer Richard Hicks on 9-28-2015 Adding Digital Readout To a Thickness Planer My planer: A Grizzly 15 Model G1021 purchased 1995 The thickness adjustment scale is small, hard to read
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationSECTION 1085 PRECAST REINFORCED CONCRETE BOX CULVERT
1085.1 1085.2(k) SECTION 1085 PRECAST REINFORCED CONCRETE BOX CULVERT 1085.1 DESCRIPTION This work is the manufacture, storage, delivery, installation, and assembly of precast reinforced concrete box culvert
More informationRayport G Eco Dealer Kit
Rayport G Eco Dealer Kit Installation Guide www.aetenergy.com Supporting a Cleaner, Greener Tomorrow 1. Table of Contents 1. Table of Contents P2 2. Installer Notes P3 3. Parts List P4-7 4. Tool List P8
More informationKeyed latch. Cover. Service Outlet 115VAC, 15A. Plastic base. Unpack. Operator. the Operator
Service Outlet Quick Start Steps Keyed latch Cover 115VAC, 15A Plastic base Operator Unpack the Operator Site Planning and Operator Installation The illustrations and instructions presented in this guide
More informationReal-World Range Testing By Christopher Hofmeister August, 2011
Real-World Range Testing By Christopher Hofmeister August, 2011 Introduction Scope This paper outlines the procedure for a successful RF range test that provides quantitative data on how the RF link performs
More information