Raise Structures an Additional 5 to 20 Feet

Size: px

Start display at page:

Download "Raise Structures an Additional 5 to 20 Feet"

Toby Jacobs
6 years ago
Views:

1 PATENTED Structure Lifting System NO Line Outage Required Most Economical Solution Low Impact Equipment Field Training Included with Equipment Rental Capitalized Expenditure No Loss of Structure Reliability or Decrease in Service Life Permanent, 30+ Year Solution Raise Structures an Additional 5 to 20 Feet Laminated Wood Systems, Inc.

Type PRH - Raise Only For H-Frames or Other Multiple Pole Structures Standard Assembly for PRH 7/8 Bolts, Round Washers, Locknuts 1 1/2 4 W A Bond One Top Bolt with 7/8 Bonding

) PhaseRaiser Standard Raises are 5, 10, 15 or 20 X = Lift Height For lifts 0 to 15 feet: L = X + 12-0 A = 5-6 For lifts 16 to 20 feet: L = X + 13-0 A = 6-6 L X A 6 7/8 Bolt,

lift - North Dakota Add additional X-brace to span gap for lifts 16ft or greater. X-brace assemblies available from LWS (ordered separately).

2 Type PRH - Raise Only For H-Frames or Other Multiple Pole Structures Standard Assembly for PRH 7/8 Bolts, Round Washers, Locknuts 1 1/2 4 W A Bond One Top Bolt with 7/8 Bonding Clip Ladder Clips 7/8 Bolt, Curved Washers, Locknuts Section A - A A Safety Cap 7/8 Bolts, 2 Round Washers, Locknuts (typ.) PhaseRaiser Standard Raises are 5, 10, 15 or 20 X = Lift Height For lifts 0 to 15 feet: L = X A = 5-6 For lifts 16 to 20 feet: L = X A = 6-6 L X A 6 7/8 Bolt, Curved Washers, Locknuts PR-1 Curved Shield 3/4 Banding 6 Ladder Clips 7/8 Bolt, Curved Washers, Locknuts 20 ft. lift - North Dakota Add additional X-brace to span gap for lifts 16ft or greater. X-brace assemblies available from LWS (ordered separately) /8 Bolts, 2 Round Washers, Locknuts (typ.) Bond One Bottom Bolt with 7/8 Bonding Clip NOTE: Most H-frame strengths are limited by the pole capacity above the X-brace. However, the capacity of the structure after lift needs to be checked either with the use of PLS-POLE or by LWS to determine if additional X-bracing is required. Page 2

Type PRH - Raise Only ORDERING INFORMATION Ordering Example: Need - Raise Structure 10-0 (X=10-0 ) Existing Pole - 75-0 Class 2 W Width of steel Order - P R H 9 2 2 L Minimum Unit Size Existing Pole

3 Type PRH - Raise Only ORDERING INFORMATION Ordering Example: Need - Raise Structure 10-0 (X=10-0 ) Existing Pole Class 2 W Width of steel Order - P R H L Minimum Unit Size Existing Pole Existing Pole Class Length H2 H PRH9 PRH9 PRH7 PRH7 PRH PRH10 PRH9 PRH8 PRH7 PRH PRH11 PRH10 PRH9 PRH7 PRH PRH11 PRH10 PRH9 PRH8 PRH PRH12 PRH11 PRH10 PRH8 PRH PRH13 PRH12 PRH10 PRH9 PRH PRH13 PRH12 PRH11 PRH9 PRH PRH14 PRH13 PRH11 PRH10 PRH PRH14 PRH13 PRH12 PRH10 PRH PRH15-80 PRH14 PRH12 PRH PRH15-80 PRH14 PRH13 PRH PRH15-80 PRH14 PRH13 PRH PRH15-80 PRH15-80 PRH13 PRH12 Contact LWS for sizes not shown. Note: Material to be galvanized. For weathering steel add W, for painted steel add P. PhaseRaiser unit size from table above. L Length of steel ( X ) Laminated Wood Systems, Inc. Seward, Nebraska Before Lift After Lift 345kV H-frame structure raised 15 feet (Iowa) U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318 Page 3

Type PRHR - Raise & Reinforce Standard Assembly for PRHR 7/8 Bolts, Round Washers, Locknuts PRH PhaseRaiser Top Unit PRHRB

Round Washers, Locknuts (typ) L X A 6 7/8 Bolt, Curved Washers, Locknuts Ladder Clips 3/4 Banding PR-1 Curved Shield 115kV

Bolts, 2 Round Washers, Locknuts 7/8 Bolt, Curved Washers, Locknuts A PRH PhaseRaiser Top Unit Bond One Bottom Bolt with 7/8

4 Type PRHR - Raise & Reinforce Standard Assembly for PRHR 7/8 Bolts, Round Washers, Locknuts PRH PhaseRaiser Top Unit PRHRB PhaseRaiser Bottom Unit W-B W Section A - A Ladder Clips Bond One Top Bolt with 7/8 Bonding Clip Safety Cap 1 1/2 4 7/8 Bolts, 2 Round Washers, Locknuts (typ) L X A 6 7/8 Bolt, Curved Washers, Locknuts Ladder Clips 3/4 Banding PR-1 Curved Shield 115kV Single Pole Structure Raised (& Reinforced) 10 feet - Alberta A Bottom unit notched for cross bolt clearance 18 7/8 Bolts, 2 Round Washers, Locknuts 7/8 Bolt, Curved Washers, Locknuts A PRH PhaseRaiser Top Unit Bond One Bottom Bolt with 7/8 Bonding Clip Embedment Depth (bottom unit length minus 5-0 ) PRHRB PhaseRaiser Bottom Unit 345kV H-frame Structure Raised 10 feet - Nebraska Page 4

5 Type PRHR - Raise & Reinforce The PRHR system is required for all single pole applications. The system is also used for multi-pole structures where groundline decay is, or could be, an issue. ORDERING INFORMATION Top Unit Minimum Size X = Lift Height Standard Raises are 5, 10, 15 or 20 Existing Pole Existing Pole Class Length H2 H PRH9 PRH9 PRH7 PRH7 PRH PRH10 PRH9 PRH8 PRH7 PRH PRH11 PRH10 PRH9 PRH7 PRH PRH11 PRH10 PRH9 PRH8 PRH PRH12 PRH11 PRH10 PRH8 PRH PRH13 PRH12 PRH10 PRH9 PRH PRH13 PRH12 PRH11 PRH9 PRH PRH14 PRH13 PRH11 PRH10 PRH PRH14 PRH13 PRH12 PRH10 PRH PRH15-80 PRH14 PRH12 PRH PRH15-80 PRH14 PRH13 PRH PRH15-80 PRH14 PRH13 PRH PRH15-80 PRH15-80 PRH13 PRH12 Bottom Unit Minimum Size (Embedment depth = L minus 5-0 ) Existing Pole Existing Pole Class Length H2 H PRHRB58-11 PRHRB58-11 PRHRB5A6-10 PRHRB5A6-10 PRHRB5A PRHRB59-11 PRHRB58-11 PRHRB5A7-10 PRHRB5A6-10 PRHRB5A PRHRB PRHRB59-11 PRHRB58-11 PRHRB5A6-10 PRHRB5A PRHRB PRHRB59-11 PRHRB58-11 PRHRB5A7-10 PRHRB5A PRHRB PRHRB PRHRB59-11 PRHRB5A7-10 PRHRB5A PRHRB PRHRB PRHRB59-11 PRHRB58-11 PRHRB5A PRHRB PRHRB PRHRB PRHRB58-11 PRHRB5A PRHRB PRHRB PRHRB PRHRB59-11 PRHRB5A PRHRB PRHRB PRHRB PRHRB59-11 PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB PRHRB For lifts 0 to 15 feet: L = X A = 5-6 For lifts 16 to 20 feet (H-Frames Only) L = X A = 6-6 (For lifts add additional X-brace) Note: Material to be galvanized. For weathering steel add W, for painted steel add P. Ordering Example: Need - Raise Structure 10-0 (X=10-0 ) Existing Pole Class 1 Order - P R H R L PhaseRaiser top unit size from table above. W Width of top unit steel L Length of top steel ( X ) (Consists of two PRH10-22L Top Units and two PRHRB59-11 Bottom Units) W-B Width of bottom unit steel U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318 Page 5

6 Structure Information Worksheet Use this form to provide LWS engineers information regarding your structure and unique lift requirements. LWS can provide a complete computer analysis on your structure(s) and will recommend & supply complete material kits that will: raise, raise and reinforce the ground line, or raise, reinforce and reclassify the poles for each structure. LWS designers may recommend additional X-braces or foundation systems with the material kits. Complete the following form and fax it to LWS at: OR fill out ONLINE at - OR submit simple spreadsheet containing quantity and size required from charts on pages 3 & 5 Customer Information Customer Name: Contact Name: Project Name: Project Address: City / State: Phone: Fax: Constr Start Date: Delivery Location: City / State / Zip Structure Type No. of Vee Braces Send detailed drawing if available Pole Information Pole Height(s): Pole Class(es): Species: Douglas-fir Southern Pine Cedar Pole Condition at Groundline: Single Pole H-Frame Inspection Report Available? Yes No Structure Information Line Voltage: 345kV 230kV 161kV 138kV Conductor Size: Shield Wire Size: 115kV 69kV Other Span Length: Date Line Built: Lift and Reinforcement Needed NOTE: Illustrations show PhaseRaisers rotated 90 o on poles for clarity. Desired Lift (5 to 20ft) Raise Raise/Reinforce Additional Comments (I.E. - cable TV, Telephone etc.) Page 6 U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318

7 Based on Customer Design Information, LWS will Specify PhaseRaiser Designs Typical PhaseRaiser Designs Page 7

8 Use the PhaseRaiser Wizard with PLS-CADD TM to Simulate Raising Conductor Clearances The PLS-CADD PhaseRaiser Wizard allows users to easily and accurately model the effects of a PhaseRaiser installation on each specific structure as well as the adjacent structures. Page 8

Materials, Equipment & Manpower Required for Typical Installations Materials Equipment Safety Cap Steel PhaseRaiser Units 7/8 Anti-split Bolts 7/8 Cross Bolts 7/8

This equipment is available for purchase or lease and includes on-site training by LWS field personnel as well as the following specialized tools and equipment: Custom

Pins Treated Timbers Nylon Ratchet Straps Banding Dispenser Banding Shear Drilling Alignment Tools 4 Working Ladders In addition to the equipment trailer, a line or boom

1 The PhaseRaiser units are also available in painted and weathering steel.

The PhaseRaiser system enables a crew as small as three for single pole or a crew of five (or six) for H-frame structures to cut the existing poles, install custom

9 Materials, Equipment & Manpower Required for Typical Installations Materials Equipment Safety Cap Steel PhaseRaiser Units 7/8 Anti-split Bolts 7/8 Cross Bolts 7/8 Threaded Rods Covers Cover Band The PhaseRaiser system requires specialized training, tools and equipment for installation. This equipment is available for purchase or lease and includes on-site training by LWS field personnel as well as the following specialized tools and equipment: Custom Equipment Trailer w/ Tool Boxes - Skid Mount Hydraulic Lifting Unit - Hydraulic Hoses - 4 x 101 Hydraulic Cylinders Cylinder Extensions Galvanized Lifting Vangs Cylinder Pins Treated Timbers Nylon Ratchet Straps Banding Dispenser Banding Shear Drilling Alignment Tools 4 Working Ladders In addition to the equipment trailer, a line or boom truck, chain saw and air compressor are also needed. PhaseRaiser units are made of high strength galvanized steel. All bolts conform to ANSI C135.1 The PhaseRaiser units are also available in painted and weathering steel. Personnel For more detailed information regarding installation, see the PhaseRaiser Installation Manual. The PhaseRaiser system enables a crew as small as three for single pole or a crew of five (or six) for H-frame structures to cut the existing poles, install custom designed galvanized or painted steel PhaseRaiser units, then raise and secure the structure to the desired height up to an additional twenty feet. LWS Field Training - A skilled field trainer from LWS works with qualified lineworkers until they develop a comfortable skill level - normally after raising two to three structures. Page 9 U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318

Over 5,000 Installations on Energized Lines Since

Expenditure Built in 1950 s Built in 1970 s Built in

Built in 1960 s Built in 1950 s Built in 1950 s Built

Projects Not Shown: California - Colorado -

Missouri - Nebraska - Nevada - New Hampshire - New

Pennsylvania South Carolina - Texas Utah - Washington

10 Over 5,000 Installations on Energized Lines Since 1997 Permanent, 30+ year Solution Capitalized Expenditure Built in 1950 s Built in 1970 s Built in 1960 s Built in 1940 s Nebraska Florida Iowa Montana Built in 1960 s Built in 1950 s Built in 1950 s Built in 1950 s Minnesota Massachusetts New Mexico Canada Projects Not Shown: California - Colorado - Connecticut - Georgia - Idaho - Maine - Michigan Missouri - Nebraska - Nevada - New Hampshire - New Jersey - New York North Carolina - North Dakota - Pennsylvania South Carolina - Texas Utah - Washington - Wisconsin Page 10 U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318

The strength and patented design of PhaseRaiser has been proven in full-scale testing.

conducted full scale structure tests on both single pole and H-frame PhaseRaiser installations.

following design parameters: Shield Wire...3/8 steel strand Conductor.

5 Lift Maximum Span...2,346 feet Maximum Groundline Moment.

11 The strength and patented design of PhaseRaiser has been proven in full-scale testing. In 1997, LWS, Inc. conducted full scale structure tests on both single pole and H-frame PhaseRaiser installations. The tests proved that the strength and design of the PhaseRaiser lifting system exceeded NESC load requirements. 345kV Double X-braced Structure Raised 5 feet Maximum Transverse Load 24,000 Lbs Based on the following design parameters: Shield Wire...3/8 steel strand Conductor ACSR 26/7 (2 per phase) NESC Medium Loading with steel overload capacity factors. 5 Lift Maximum Span...2,346 feet Maximum Groundline Moment...194,400 ft-lbs PhaseRaiser Rated Capacity...220,000 ft-lbs X-Braced Load...24,019 Lbs. 50ft Class 3 Pole Raised 8 feet Pole Failure... 3,500 pounds Loaded AGL Groundline Moment Failure ,400 ft-lbs No permanent Deformation Page 11 U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318

U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318 If your structures are good enough to be in service, they are good enough to raise and remain in service!

12 U.S. PATENTS 6,115,988 6,151,860 CANADIAN PATENTS 2,252,115 2,297,318 If your structures are good enough to be in service, they are good enough to raise and remain in service! PhaseRaiser is a PERMANENT solution, get 30 or more years out of your structure. Built in 1950 s Built in 1970 s Built in 1960 s Built in 1940 s Nebraska Florida Iowa Montana Give PhaseRaiser a try with a pilot project of 20 or more structures today! Visit: or call: Laminated Wood Systems, Inc. Seward, Nebraska Laminated Wood Systems, Inc

Installation Instructions

Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The